| 1. |
- Abolfathi, Bela, et al.
(författare)
-
The Fourteenth Data Release of the Sloan Digital Sky Survey : First Spectroscopic Data from the Extended Baryon Oscillation Spectroscopic Survey and from the Second Phase of the Apache Point Observatory Galactic Evolution Experiment
- 2018
-
Ingår i: Astrophysical Journal Supplement Series. - : IOP Publishing Ltd. - 0067-0049 .- 1538-4365. ; 235:2
-
Tidskriftsartikel (refereegranskat)abstract
- The fourth generation of the Sloan Digital Sky Survey (SDSS-IV) has been in operation since 2014 July. This paper describes the second data release from this phase, and the 14th from SDSS overall (making this Data Release Fourteen or DR14). This release makes the data taken by SDSS-IV in its first two years of operation (2014-2016 July) public. Like all previous SDSS releases, DR14 is cumulative, including the most recent reductions and calibrations of all data taken by SDSS since the first phase began operations in 2000. New in DR14 is the first public release of data from the extended Baryon Oscillation Spectroscopic Survey; the first data from the second phase of the Apache Point Observatory (APO) Galactic Evolution Experiment (APOGEE-2), including stellar parameter estimates from an innovative data-driven machine-learning algorithm known as "The Cannon"; and almost twice as many data cubes from the Mapping Nearby Galaxies at APO (MaNGA) survey as were in the previous release (N = 2812 in total). This paper describes the location and format of the publicly available data from the SDSS-IV surveys. We provide references to the important technical papers describing how these data have been taken (both targeting and observation details) and processed for scientific use. The SDSS web site (www.sdss.org) has been updated for this release and provides links to data downloads, as well as tutorials and examples of data use. SDSS-IV is planning to continue to collect astronomical data until 2020 and will be followed by SDSS-V.
|
|
| 2. |
- Chen, Haiyang, et al.
(författare)
-
A guest-assisted molecular-organization approach for >17% efficiency organic solar cells using environmentally friendly solvents
- 2021
-
Ingår i: Nature Energy. - : NATURE PORTFOLIO. - 2058-7546. ; 6:11, s. 1045-1053
-
Tidskriftsartikel (refereegranskat)abstract
- The power conversion efficiencies (PCEs) of laboratory-sized organic solar cells (OSCs), usually processed from low-boiling-point and toxic solvents, have reached high values of over 18%. However, there is usually a notable drop of the PCEs when green solvents are used, limiting practical development of OSCs. Herein, we obtain certificated PCEs over 17% in OSCs processed from a green solvent paraxylene (PX) by a guest-assisted assembly strategy, where a third component (guest) is employed to manipulate the molecular interaction of the binary blend. In addition, the high-boiling-point green solvent PX also enables us to deposit a uniform large-area module (36 cm(2)) with a high efficiency of over 14%. The strong molecular interaction between the host and guest molecules also enhances the operational stability of the devices. Our guest-assisted assembly strategy provides a unique approach to develop large-area and high-efficiency OSCs processed from green solvents, paving the way for industrial development of OSCs. Organic solar cells processed from green solvents are easier to implement in manufacturing yet their efficiency is low. Chen et al. devise a guest molecule to improve the molecular packing, enabling devices with over 17% efficiency.
|
|
| 3. |
- Chen, Xian-Kai, et al.
(författare)
-
A unified description of non-radiative voltage losses in organic solar cells
- 2021
-
Ingår i: Nature Energy. - : Springer Nature. - 2058-7546. ; 6:8, s. 799-806
-
Tidskriftsartikel (refereegranskat)abstract
- Organic solar cells based on non-fullerene acceptors have enabled high efficiencies yet their charge dynamics and its impact on the photovoltaic parameters are not fully understood. Now, Chen et al. provide a general description of non-radiative voltage losses in both fullerene and non-fullerene solar cells. Recent advances in organic solar cells based on non-fullerene acceptors (NFAs) come with reduced non-radiative voltage losses (Delta V-nr). Here we show that, in contrast to the energy-gap-law dependence observed in conventional donor:fullerene blends, the Delta V-nr values in state-of-the-art donor:NFA organic solar cells show no correlation with the energies of charge-transfer electronic states at donor:acceptor interfaces. By combining temperature-dependent electroluminescence experiments and dynamic vibronic simulations, we provide a unified description of Delta V-nr for both fullerene- and NFA-based devices. We highlight the critical role that the thermal population of local exciton states plays in low-Delta V-nr systems. An important finding is that the photoluminescence yield of the pristine materials defines the lower limit of Delta V-nr. We also demonstrate that the reduction in Delta V-nr (for example, <0.2 V) can be obtained without sacrificing charge generation efficiency. Our work suggests designing donor and acceptor materials with high luminescence efficiency and complementary optical absorption bands extending into the near-infrared region.
|
|
| 4. |
- Cui, Yong, et al.
(författare)
-
Accurate photovoltaic measurement of organic cells for indoor applications
- 2021
-
Ingår i: Joule. - : CELL PRESS. - 2542-4351. ; 5:5, s. 1016-1023
-
Tidskriftsartikel (övrigt vetenskapligt/konstnärligt)abstract
- Photovoltaic (PV) cells offer a convenient energy source to drive micropower electronic devices for indoor applications. However, it is challenging to measure the power conversion efficiency (PCE) of PV cells under indoor lighting and the PV community lacks a feasible and accurate measurement protocol. Here, we start with the fundamental parameters which determine the PCE, and carefully design a series of experiments to examine the origins which might cause measurement errors for organic PV measurements under indoor lighting. We demonstrate the critical importance of: 1, temporal stability and spatial homogeneity of the light sources, 2, calibration of the spectral irradiance and illuminations of the light sources, 3, the area of the cells (1 cm2 or large cells are preferred), 4, the aperture of the mask (an aperture slightly smaller than the cell area is preferred), and 5, stray lights from the measurement environment. Based on these careful investigations, we suggest a feasible measurement method, by which accurate measurement of the indoor PV efficiency is made possible. Our study will promote the healthy development of indoor PV technology for practical applications.
|
|
| 5. |
- Cui, Yong, et al.
(författare)
-
Efficient Semitransparent Organic Solar Cells with Tunable Color enabled by an Ultralow-Bandgap Nonfullerene Acceptor
- 2017
-
Ingår i: Advanced Materials. - : WILEY-V C H VERLAG GMBH. - 0935-9648 .- 1521-4095. ; 29:43
-
Tidskriftsartikel (refereegranskat)abstract
- Semitransparent organic solar cells (OSCs) show attractive potential in power-generating windows. However, the development of semitransparent OSCs is lagging behind opaque OSCs. Here, an ultralow-bandgap non-fullerene acceptor, "IEICO-4Cl", is designed and synthesized, whose absorption spectrum is mainly located in the near-infrared region. When IEICO-4Cl is blended with different polymer donors (J52, PBDB-T, and PTB7-Th), the colors of the blend films can be tuned from purple to blue to cyan, respectively. Traditional OSCs with a nontransparent Al electrode fabricated by J52: IEICO-4Cl, PBDB-T: IEICO-4Cl, and PTB7-Th: IEICO-4Cl yield power conversion efficiencies (PCE) of 9.65 +/- 0.33%, 9.43 +/- 0.13%, and 10.0 +/- 0.2%, respectively. By using 15 nm Au as the electrode, semitransparent OSCs based on these three blends also show PCEs of 6.37%, 6.24%, and 6.97% with high average visible transmittance (AVT) of 35.1%, 35.7%, and 33.5%, respectively. Furthermore, via changing the thickness of Au in the OSCs, the relationship between the transmittance and efficiency is studied in detail, and an impressive PCE of 8.38% with an AVT of 25.7% is obtained, which is an outstanding value in the semitransparent OSCs.
|
|
| 6. |
- Cui, Yong, et al.
(författare)
-
Over 16% efficiency organic photovoltaic cells enabled by a chlorinated acceptor with increased open-circuit voltages
- 2019
-
Ingår i: Nature Communications. - : NATURE PUBLISHING GROUP. - 2041-1723. ; 10
-
Tidskriftsartikel (refereegranskat)abstract
- Broadening the optical absorption of organic photovoltaic (OPV) materials by enhancing the intramolecular push-pull effect is a general and effective method to improve the power conversion efficiencies of OPV cells. However, in terms of the electron acceptors, the most common molecular design strategy of halogenation usually results in down-shifted molecular energy levels, thereby leading to decreased open-circuit voltages in the devices. Herein, we report a chlorinated non-fullerene acceptor, which exhibits an extended optical absorption and meanwhile displays a higher voltage than its fluorinated counterpart in the devices. This unexpected phenomenon can be ascribed to the reduced non-radiative energy loss (0.206 eV). Due to the simultaneously improved short-circuit current density and open-circuit voltage, a high efficiency of 16.5% is achieved. This study demonstrates that finely tuning the OPV materials to reduce the bandgap-voltage offset has great potential for boosting the efficiency.
|
|
| 7. |
- Cui, Yong, et al.
(författare)
-
Single-Junction Organic Photovoltaic Cells with Approaching 18% Efficiency
- 2020
-
Ingår i: Advanced Materials. - : WILEY-V C H VERLAG GMBH. - 0935-9648 .- 1521-4095. ; 32:19
-
Tidskriftsartikel (refereegranskat)abstract
- Optimizing the molecular structures of organic photovoltaic (OPV) materials is one of the most effective methods to boost power conversion efficiencies (PCEs). For an excellent molecular system with a certain conjugated skeleton, fine tuning the alky chains is of considerable significance to fully explore its photovoltaic potential. In this work, the optimization of alkyl chains is performed on a chlorinated nonfullerene acceptor (NFA) named BTP-4Cl-BO (a Y6 derivative) and very impressive photovoltaic parameters in OPV cells are obtained. To get more ordered intermolecular packing, the n-undecyl is shortened at the edge of BTP-eC11 to n-nonyl and n-heptyl. As a result, the NFAs of BTP-eC9 and BTP-eC7 are synthesized. The BTP-eC7 shows relatively poor solubility and thus limits its application in device fabrication. Fortunately, the BTP-eC9 possesses good solubility and, at the same time, enhanced electron transport property than BTP-eC11. Significantly, due to the simultaneously enhanced short-circuit current density and fill factor, the BTP-eC9-based single-junction OPV cells record a maximum PCE of 17.8% and get a certified value of 17.3%. These results demonstrate that minimizing the alkyl chains to get suitable solubility and enhanced intermolecular packing has a great potential in further improving its photovoltaic performance.
|
|
| 8. |
- Cui, Yong, et al.
(författare)
-
Wide-gap non-fullerene acceptor enabling high-performance organic photovoltaic cells for indoor applications
- 2019
-
Ingår i: NATURE ENERGY. - : NATURE PUBLISHING GROUP. - 2058-7546. ; 4:9, s. 768-775
-
Tidskriftsartikel (refereegranskat)abstract
- Organic photovoltaic cells are potential candidates to drive low power consumption off-grid electronics for indoor applications. However, their power conversion efficiency is still limited by relatively large losses in the open-circuit voltage and a non-optimal absorption spectrum for indoor illumination. Here, we carefully designed a non-fullerene acceptor named IO-4CI and blend it with a polymer donor named PBDB-TF to obtain a photoactive layer whose absorption spectrum matches that of indoor light sources. The photovoltaic characterizations reveal a low energy loss below 0.60 eV. As a result, the organic photovoltaic cell (1 cm(2)) shows a power conversion efficiency of 26.1% with an open-circuit voltage of 1.10 V under a light-emitting diode illumination of 1,000 lux (2,700 K). We also fabricated a large-area cell (4 cm(2)) through the blade-coating method. Our cell shows an excellent stability, maintaining its initial photovoltaic performance under continuous illumination of the indoor light source for 1,000 hours.
|
|
| 9. |
- Gao, Feng, et al.
(författare)
-
The Effect of Processing Additives on Energetic Disorder in Highly Efficient Organic Photovoltaics : A Case Study on PBDTTT-C-T:PC71BM
- 2015
-
Ingår i: Advanced Materials. - : Wiley-VCH Verlag. - 0935-9648 .- 1521-4095. ; 27:26, s. 3868-3873
-
Tidskriftsartikel (refereegranskat)abstract
- Energetic disorder, an important parameter affecting the performance of organic photovoltaics, is significantly decreased upon the addition of processing additives in a highly efficient benzodithiophene-based copolymer blend (PBDTTT-C-T:PC71BM). Wide-angle and small-angle X-ray scattering measurements suggest that the origin of this reduced energetic disorder is due to increased aggregation and a larger average fullerene domain size together with purer phases.
|
|
| 10. |
- Hopper, Thomas R., et al.
(författare)
-
Control of Donor-Acceptor Photophysics through Structural Modification of a "Twisting" Push-Pull Molecule
- 2019
-
Ingår i: Chemistry of Materials. - : AMER CHEMICAL SOC. - 0897-4756 .- 1520-5002. ; 31:17, s. 6860-6869
-
Tidskriftsartikel (refereegranskat)abstract
- In contemporary organic solar cell (OSC) research, small A-D-A molecules comprising electron donor (D) and acceptor (A) units are increasingly used as a means to control the optoelectronic properties of photovoltaic blends. Slight structural variations to these A-D-A molecules can result in profound changes to the performance of the OSCs. Herein, we study two A-D-A molecules, BTCN-O and BTCN-M, which are identical in structure apart from a subtle difference in the position of alkyl chains, which force the molecules to adopt different equilibrium conformations. These steric effects cause the respective molecules to work better as an electron donor and acceptor when blended with benchmark acceptor and donor materials (PC71BM and PBDB-T). We study the photophysics of these "D:A" blends and devices using a combination of steady-state and time-resolved spectroscopic techniques. Time-resolved photoluminescence reveals the impact of the molecular conformation on the quenching of the A-D-A emission when BTCN-O and BTCN-M are blended with PBDB-T or PC71BM. Ultrafast broadband transient absorption spectroscopy demonstrates that the dynamics of charge separation are essentially identical when comparing BTCN-M and BTCN-O based blends, but the recombination dynamics are quite dissimilar. This suggests that the device performance is ultimately determined by the morphology of the blends imposed by the A-D-A conformation. This notion is supported by X-ray scattering measurements on the "D:A" films, electroluminescence data, and pump-push-photocurrent spectroscopy on the "D:A" devices. Our findings provide insight into the remarkable structure-function relationship in A-D-A molecules and emphasize the need for careful morphological and energetic considerations when designing high-performance OSCs.
|
|
| 11. |
- Hou, Jianhui, et al.
(författare)
-
Organic solar cells based on non-fullerene acceptors
- 2018
-
Ingår i: Nature Materials. - : Nature Publishing Group. - 1476-1122 .- 1476-4660. ; 17:2, s. 119-128
-
Forskningsöversikt (refereegranskat)abstract
- Organic solar cells (OSCs) have been dominated by donor: acceptor blends based on fullerene acceptors for over two decades. This situation has changed recently, with non-fullerene (NF) OSCs developing very quickly. The power conversion efficiencies of NF OSCs have now reached a value of over 13%, which is higher than the best fullerene-based OSCs. NF acceptors show great tunability in absorption spectra and electron energy levels, providing a wide range of new opportunities. The coexistence of low voltage losses and high current generation indicates that new regimes of device physics and photophysics are reached in these systems. This Review highlights these opportunities made possible by NF acceptors, and also discuss the challenges facing the development of NF OSCs for practical applications.
|
|
| 12. |
- Li, Xiane, et al.
(författare)
-
Mapping the energy level alignment at donor/acceptor interfaces in non-fullerene organic solar cells
- 2022
-
Ingår i: Nature Communications. - : Nature Portfolio. - 2041-1723. ; 13:1
-
Tidskriftsartikel (refereegranskat)abstract
- Energy level alignment (ELA) at donor-acceptor heterojunctions is of vital importance yet largely undetermined in organic solar cells. Here, authors determine the heterojunction ELA with (mono) layer-by-layer precision to understand the co-existence of efficient charge. Energy level alignment (ELA) at donor (D) -acceptor (A) heterojunctions is essential for understanding the charge generation and recombination process in organic photovoltaic devices. However, the ELA at the D-A interfaces is largely underdetermined, resulting in debates on the fundamental operating mechanisms of high-efficiency non-fullerene organic solar cells. Here, we systematically investigate ELA and its depth-dependent variation of a range of donor/non-fullerene-acceptor interfaces by fabricating and characterizing D-A quasi bilayers and planar bilayers. In contrast to previous assumptions, we observe significant vacuum level (VL) shifts existing at the D-A interfaces, which are demonstrated to be abrupt, extending over only 1-2 layers at the heterojunctions, and are attributed to interface dipoles induced by D-A electrostatic potential differences. The VL shifts result in reduced interfacial energetic offsets and increased charge transfer (CT) state energies which reconcile the conflicting observations of large energy level offsets inferred from neat films and large CT energies of donor - non-fullerene-acceptor systems.
|
|
| 13. |
- Luo, Xuhao, et al.
(författare)
-
Intrinsic polarization-sensitive organic photodetector with self-assembled all-polymer heterojunction
- 2022
-
Ingår i: Applied Physics Letters. - : AIP Publishing. - 0003-6951 .- 1077-3118. ; 121:23
-
Tidskriftsartikel (refereegranskat)abstract
- Intrinsic polarization-sensitive photodetectors (IPPDs) have attracted considerable attention in recent years due to their simplicity in configuration, making them ideal candidates for compact and integrated polarization-sensitive sensing and imaging systems. Photoactive films with intrinsic optical anisotropy are necessary for IPPDs. This study reports an achievement of photoactive films based on all-polymer heterojunction films with in-plane optical anisotropy using a simple bottom-up self-assembly method. Both the donor (TQ1) and acceptor (N2200) polymers have the same spatial orientation with distinct anisotropy, approaching a dichroic ratio (DR) of 8. Polarization-sensitive light absorption is due to the uniaxially oriented polymer chains, which are dominated by lamellar packing with edge-on orientation. For IPPDs based on this anisotropic all-polymer heterojunction film, a photocurrent anisotropy was found with a polarized photocurrent ratio of 2.6. The detectivity of these IPPDs was found to be 1.9 × 1011 Jones (@ ∼600 nm, 0 V bias). Our work shows that oriented polymer donor-acceptor films fabricated using bottom-up self-assembly have great potential in applications, such as polarization detection.
|
|
| 14. |
- Qian, Deping, et al.
(författare)
-
Design rules for minimizing voltage losses in high-efficiency organic solar cells
- 2018
-
Ingår i: Nature Materials. - : NATURE PUBLISHING GROUP. - 1476-1122 .- 1476-4660. ; 17:8, s. 703-
-
Tidskriftsartikel (refereegranskat)abstract
- The open-circuit voltage of organic solar cells is usually lower than the values achieved in inorganic or perovskite photovoltaic devices with comparable bandgaps. Energy losses during charge separation at the donor-acceptor interface and non-radiative recombination are among the main causes of such voltage losses. Here we combine spectroscopic and quantum-chemistry approaches to identify key rules for minimizing voltage losses: (1) a low energy offset between donor and acceptor molecular states and (2) high photoluminescence yield of the low-gap material in the blend. Following these rules, we present a range of existing and new donor-acceptor systems that combine efficient photocurrent generation with electroluminescence yield up to 0.03%, leading to non-radiative voltage losses as small as 0.21 V. This study provides a rationale to explain and further improve the performance of recently demonstrated high-open-circuit-voltage organic solar cells.
|
|
| 15. |
- Shi, Furong, et al.
(författare)
-
A Nitroxide Radical Conjugated Polymer as an Additive to Reduce Nonradiative Energy Loss in Organic Solar Cells
- 2023
-
Ingår i: Advanced Materials. - : Wiley. - 0935-9648 .- 1521-4095. ; 35:23
-
Tidskriftsartikel (refereegranskat)abstract
- Nonfullerene-acceptor-based organic solar cells (NFA-OSCs) are now set off to the 20% power conversion efficiency milestone. To achieve this, minimizing all loss channels, including nonradiative photovoltage losses, seems a necessity. Nonradiative recombination, to a great extent, is known to be an inherent material property due to vibrationally induced decay of charge-transfer (CT) states or their back electron transfer to the triplet excitons. Herein, it is shown that the use of a new conjugated nitroxide radical polymer with 2,2,6,6-tetramethyl piperidine-1-oxyl side groups (GDTA) as an additive results in an improvement of the photovoltaic performance of NFA-OSCs based on different active layer materials. Upon the addition of GDTA, the open-circuit voltage (VOC), fill factor (FF), and short-circuit current density (JSC) improve simultaneously. This approach is applied to several material systems including state-of-the-art donor/acceptor pairs showing improvement from 15.8% to 17.6% (in the case of PM6:Y6) and from 17.5% to 18.3% (for PM6:BTP-eC9). Then, the possible reasons behind the observed improvements are discussed. The results point toward the suppression of the CT state to triplet excitons loss channel. This work presents a facile, promising, and generic approach to further improve the performance of NFA-OSCs.
|
|
| 16. |
- Wang, Yuming, et al.
(författare)
-
Optical Gaps of Organic Solar Cells as a Reference for Comparing Voltage Losses
- 2018
-
Ingår i: Advanced Energy Materials. - : WILEY-V C H VERLAG GMBH. - 1614-6832 .- 1614-6840. ; 8:28
-
Tidskriftsartikel (refereegranskat)abstract
- The voltage loss, determined by the difference between the optical gap (E-g) and the open-circuit voltage (V-OC), is one of the most important parameters determining the performance of organic solar cells (OSCs). However, the variety of different methods used to determine E-g makes it hard to fairly compare voltages losses among different material systems. In this paper, the authors discuss and compare various E-g determination methods and show how they affect the detailed calculation of voltage losses, as well as predictions of the maximum achievable power conversion efficiency. The aim of this paper is to make it possible for the OSC community to compare voltage losses in a consistent and reasonable way. It is found that the voltage losses for strongly absorbed photons in state-of-the-art OSCs are not much less than 0.6 V, which still must be decreased to further enhance efficiency.
|
|
| 17. |
- Xu, Lei, et al.
(författare)
-
The Role of Solution Aggregation Property toward High-Efficiency Non-Fullerene Organic Photovoltaic Cells
- 2024
-
Ingår i: Advanced Materials. - : WILEY-V C H VERLAG GMBH. - 0935-9648 .- 1521-4095.
-
Tidskriftsartikel (refereegranskat)abstract
- In organic photovoltaic cells, the solution-aggregation effect (SAE) is long considered a critical factor in achieving high power-conversion efficiencies for polymer donor (PD)/non-fullerene acceptor (NFA) blend systems. However, the underlying mechanism has yet to be fully understood. Herein, based on an extensive study of blends consisting of the representative 2D-benzodithiophene-based PDs and acceptor-donor-acceptor-type NFAs, it is demonstrated that SAE shows a strong correlation with the aggregation kinetics during solidification, and the aggregation competition between PD and NFA determines the phase separation of blend film and thus the photovoltaic performance. PDs with strong SAEs enable earlier aggregation evolutions than NFAs, resulting in well-known polymer-templated fibrillar network structures and superior PCEs. With the weakening of PDs' aggregation effects, NFAs, showing stronger tendencies to aggregate, tend to form oversized domains, leading to significantly reduced external quantum efficiencies and fill factors. These trends reveal the importance of matching SAE between PD and NFA. The aggregation abilities of various materials are further evaluated and the aggregation ability/photovoltaic parameter diagrams of 64 PD/NFA combinations are provided. This work proposes a guiding criteria and facile approach to match efficient PD/NFA systems. A systematic study of the representative organic photovoltaic systems shows that the aggregation competition between polymer donor (PD) and non-fullerene acceptor (NFA) is a decisive factor in the phase separation of blend film and thus the photovoltaic performance. Based on 64 PD/NFA combinations, the aggregation ability/photovoltaic parameter heatmaps are plotted, providing a new matching rule for developing high-efficiency PD/NFA systems. image
|
|
| 18. |
- Yao, Huifeng, et al.
(författare)
-
14.7% Efficiency Organic Photovoltaic Cells Enabled by Active Materials with a Large Electrostatic Potential Difference
- 2019
-
Ingår i: Journal of the American Chemical Society. - : American Chemical Society (ACS). - 0002-7863 .- 1520-5126. ; 141:19, s. 7743-7750
-
Tidskriftsartikel (refereegranskat)abstract
- Although significant improvements have been achieved for organic photovoltaic cells (OPVs), the top-performing devices still show power conversion efficiencies far behind those of commercialized solar cells. One of the main reasons is the large driving force required for separating electron-hole pairs. Here, we demonstrate an efficiency of 14.7% in the single-junction OPV by using a new polymer donor PTO2 and a nonfullerene acceptor IT-4F. The device possesses an efficient charge generation at a low driving force. Ultrafast transient absorption measurements probe the formation of loosely bound charge pairs with extended lifetime that impedes the recombination of charge carriers in the blend. The theoretical studies reveal that the molecular electrostatic potential (ESP) between PTO2 and IT-4F is large, and the induced intermolecular electric field may assist the charge generation. The results suggest OPVs have the potential for further improvement by judicious modulation of ESP.
|
|
| 19. |
- Yao, Huifeng, et al.
(författare)
-
Critical Role of Molecular Electrostatic Potential on Charge Generation in Organic Solar Cells
- 2018
-
Ingår i: Chinese journal of chemistry. - : WILEY-V C H VERLAG GMBH. - 1001-604X .- 1614-7065. ; 36:6, s. 491-494
-
Tidskriftsartikel (refereegranskat)abstract
- Revealing the charge generation is a crucial step to understand the organic photovoltaics. Recent development in non-fullerene organic solar cells (OSCs) indicates efficient charge separation even with negligible energetic offset between the donor and acceptor materials. These new findings trigger a critical question concerning the charge separation mechanism in OSCs, traditionally believed to result from sufficient energetic offset between the polymer donor and fullerene acceptor. We propose a new mechanism, which involves the molecular electrostatic potential, to explain efficient charge separation in non-fullerene OSCs. Together with the new mechanism, we demonstrate a record efficiency of similar to 12% for systems with negligible energetic offset between donor and acceptor materials. Our analysis also rationalizes different requirement of the energetic offset between fullerene-based and non-fullerene OSCs, and paves the way for further design of OSC materials with both high photocurrent and high photovoltage at the same time.
|
|
| 20. |
- Yuan, Jun, et al.
(författare)
-
Reducing Voltage Losses in the A-DAD-A Acceptor-Based Organic Solar Cells
- 2020
-
Ingår i: Chem. - : CELL PRESS. - 2451-9308 .- 2451-9294. ; 6:9, s. 2147-2161
-
Tidskriftsartikel (refereegranskat)abstract
- Power conversion efficiencies (PCEs) of solution-processed organic solar cells (OSCs) have recently reached 17.4% (certified) for single-junction devices. Crucial to this advancement is the development of non-fullerene acceptors (NFAs) since 2015. The recent A-DAD-A NFAs have attracted widespread attention because of their ladder-type electron-deficient-core-based central fused ring with improved transport properties and optimum energy levels. With the synergistic effect of electron-deficient-core and specific molecular geometry, the A-DADA molecules could achieve low voltage losses and high current generation at the same time, reaching new regimes of device physics and photophysics. This perspective will discuss the voltage losses in state-of-the-art A-DAD-A NFA-based OSCs and propose new molecular design strategies to achieve PCEs over 20% in OSCs based on these new acceptors by further decreasing their total voltage losses.
|
|
| 21. |
- Zhang, Yun, et al.
(författare)
-
Fluorination vs. chlorination: a case study on high performance organic photovoltaic materials
- 2018
-
Ingår i: Science in China Series B. - : SCIENCE PRESS. - 1674-7291 .- 1869-1870. ; 61:10, s. 1328-1337
-
Tidskriftsartikel (refereegranskat)abstract
- Halogenation is a very efficient chemical modification method to tune the molecular energy levels, absorption spectra and molecular packing of organic semiconductors. Recently, in the field of organic solar cells (OSCs), both fluorine- and chlorinesubstituted photovoltaic materials, including donors and acceptors, demonstrated their great potentials in achieving high power conversion efficiencies (PCEs), raising a question that how to make a decision between fluorination and chlorination when designing materials. Herein, we systemically studied the impact of fluorination and chlorination on the properties of resulting donors (PBDB-T-2F and PBDB-T-2Cl) and acceptors (IT-4F and IT-4Cl). The results suggest that all the OSCs based on different donor and acceptor combinations can deliver good PCEs around 13%-14%. Chlorination is more effective than fluorination in downshifting the molecular energy levels and broadening the absorption spectra. The influence of chlorination and fluorination on the crystallinity of the resulting materials is dependent on their introduction positions. As chlorination has the advantage of easy synthesis, it is more attractive in designing low-cost photovoltaic materials and therefore may have more potential in largescale applications.
|
|
| 22. |
- Zhao, Wenchao, et al.
(författare)
-
Fullerene-Free Polymer Solar Cells with over 11% Efficiency and Excellent Thermal Stability
- 2016
-
Ingår i: Advanced Materials. - : WILEY-V C H VERLAG GMBH. - 0935-9648 .- 1521-4095. ; 28:23, s. 4734-4739
-
Tidskriftsartikel (refereegranskat)abstract
- A nonfullerene-based polymer solar cell (PSC) that significantly outperforms fullerene-based PSCs with respect to the power-conversion efficiency is demonstrated for the first time. An efficiency of amp;gt;11%, which is among the top values in the PSC field, and excellent thermal stability is obtained using PBDB-T and ITIC as donor and acceptor, respectively.
|
|
