| 1. |
- Ahmed, Tahmeed, et al.
(författare)
-
Evaluation of the impacts of seawater integration to electrocoagulation for the removal of pollutants from textile wastewater
- 2024
-
Ingår i: Environmental Sciences Europe. - : Springer Nature. - 2190-4707 .- 2190-4715. ; 36
-
Tidskriftsartikel (refereegranskat)abstract
- Recent textile industry expansion has a major environmental impact if not addressed. Being a water intensive industry, textile manufacturing is usually associated with wastewater management challenges. Electrocoagulation (EC) is recognized as one of the effective solutions to address these challenges. This study aims to investigate the potential of integrating seawater into the EC process for textile wastewater treatment, targeting optimal pollutant removal efficiencies. A simple electrolytic reactor was designed to investigate the removal efficiency of these treatments for chemical oxygen demand (COD), total suspended solids (TSS), turbidity, and color from textile wastewater at different seawater percentages and retention times. Notably, the addition of seawater not only improves the EC process efficiency but also significantly dilutes pollutants, reducing their concentrations. This dual effect enhances removal efficiency and dilution optimizes the treatment outcome. The highest removal efficiencies were achieved for COD (47.26%), TSS (99.52%), turbidity (99.30%), and color (98.19%). However, pH, dissolved oxygen (DO), and electrical conductivity increased with increasing retention times and seawater percentages in the EC process. Moreover, Seawater − EC integration reduces power usage to 15.769 Am−2 and costs approximately 0.20 USD/m3. To assess the effects of the retention times and seawater percentages on pollutant removal from textile wastewater, an analysis of variance (ANOVA) was conducted utilizing the Design-Expert 11 software. The best model obtained using Central Composite Design (CCD) was quadratic for COD (R2 = 0.9121), color (R2 = 0.9535), turbidity (R2 = 0.9525), and TSS (R2 = 0.9433). This study suggests that higher seawater percentages and longer retention times effectively eliminate contaminants but increase ion concentrations.
|
|
| 2. |
- Ahsan, Amimul, et al.
(författare)
-
Modeling of a new triangular shape solar distillation system integrated with solar PV panel and DC water heater
- 2023
-
Ingår i: Case Studies in Thermal Engineering. - : Elsevier. - 2214-157X. ; 44
-
Tidskriftsartikel (refereegranskat)abstract
- A new triangular shape solar distillation system is fabricated using locally available materials by integrating with solar PV panel connected to DC water heater. It is designed for the first time to distill saline water or seawater using solar heat energy directly (to heat sample water) and indirectly (through water heater to heat sample water). The trough is made of Plexiglass and painted in black color which is placed inside the triangular frame made of UPVC pipe. The performance of the still is experimented in field. The diurnal variations of solar heat energy, distillate output, various temperatures and relative humidity are observed. A few linear proportional relationships are obtained between the sunlight heat energy and the productivity, between the ambient temperature and the productivity, and between the productivity and water-cover temperature difference. The production rate of the still is higher than the conventional one. An improved simulation model is proposed to estimate the productivity of the still as some previous simulation models cannot estimate the productivity of the solar still precisely. A few new factors are incorporated in the new model as these factors affect the distillate output of the solar still.
|
|
| 3. |
- Ahsan, Amimul, et al.
(författare)
-
Modeling the impacts of best management practices (BMPs) on pollution reduction in the Yarra River catchment, Australia
- 2023
-
Ingår i: Applied water science. - : Springer. - 2190-5487 .- 2190-5495. ; 13
-
Tidskriftsartikel (refereegranskat)abstract
- Pollution of a watershed by different land uses and agricultural practices is becoming a major challenging factor that results in deterioration of water quality affecting human health and ecosystems. Sustainable use of available water resources warrants reduction of Non-Point Source (NPS) pollutants from receiving water bodies through best management practices (BMPs). A hydrologic model such as the Soil and Water Assessment Tool (SWAT) can be used for analyzing the impacts of various BMPs and implementing of different management plans for water quality improvement, which will help decision makers to determine the best combination of BMPs to maximize benefits. The objective of this study is to assess the potential reductions of sediments and nutrient loads by utilizing different BMPs on the Yarra River watershed using the SWAT model. The watershed is subdivided into 51 sub-watersheds where seven different BMPs were implemented. A SWAT model was developed and calibrated against a baseline period of 1998–2008. For calibration and validation of the model simulations for both the monthly and annual nutrients and sediments were assessed by using the Nash–Sutcliffe efficiency (NSE) statistical index. The values of the NSE were found more than 0.50 which indicates satisfactory model predictions. By utilizing different BMPs, the highest pollution reduction with minimal costs can be done by 32% targeted mixed-crop area. Furthermore, the combined effect of five BMPs imparts most sediments and nutrient reductions in the watershed. Overall, the selection of a BMP or combinations of BMPs should be set based on the goals set in a BMP application project.
|
|
| 4. |
- Das, Sushil K., et al.
(författare)
-
Calibration, validation and uncertainty analysis of a SWAT water quality model
- 2024
-
Ingår i: Applied water science. - : Springer Nature. - 2190-5487 .- 2190-5495. ; 14:4
-
Tidskriftsartikel (refereegranskat)abstract
- Sediment and nutrient pollution in water bodies is threatening human health and the ecosystem, due to rapid land use changes and improper agricultural practices. The impact of the nonpoint source pollution needs to be evaluated for the sustainable use of water resources. An ideal tool like the soil and water assessment tool (SWAT) can assess the impact of pollutant loads on the drainage area, which could be beneficial for developing a water quality management model. This study aims to evaluate the SWAT model’s multi-objective and multivariable calibration, validation, and uncertainty analysis at three different sites of the Yarra River drainage area in Victoria, Australia. The drainage area is split into 51 subdrainage areas in the SWAT model. The model is calibrated and validated for streamflow from 1990 to 2008 and sediment and nutrients from 1998 to 2008. The results show that most of the monthly and annual calibration and validation for streamflow, nutrients, and sediment at the three selected sites are found with Nash–Sutcliffe efficiency values greater than 0.50. Furthermore, the uncertainty analysis of the model shows satisfactory results where the p-factor value is reliable by considering 95% prediction uncertainty and the d-factor value is close to zero. The model's results indicate that the model performs well in the river's watershed, which helps construct a water quality management model. Finally, the model application in the cost-effective management of water quality might reduce pollution in water bodies due to land use and agricultural activities, which would be beneficial to water management managers.
|
|
| 5. |
- Kaur, Parminder, et al.
(författare)
-
Photoelectrocatalytic treatment of municipal wastewater with emerging concern pollutants using modified multi-layer catalytic anode
- 2023
-
Ingår i: Chemosphere. - : Elsevier Ltd. - 0045-6535 .- 1879-1298. ; 339
-
Tidskriftsartikel (refereegranskat)abstract
- Municipal wastewater contains emergent chemical and biological pollutants that are resistant to conventional wastewater treatments. Therefore, the focus of the current study was to address the challenge of removing emergent chemical and biological pollutants present in municipal wastewater. To achieve this, a photo electro-catalytic (PEC) treatment approach was employed, focusing on the removal of both micro and biological pollutants that are of emergent concern, as well as the reduction of Chemical Oxidation Demand (COD) and Total Organic Carbon (TOC). The treatment involved the use of a modified multi-layer catalytic anode photo-electroactive anode as an effective anode for PEC treatment of municipal wastewater. In the continuous mode of operation, %COD removal was optimized for the treatment of municipal wastewater under Ultra-Violet C (UVc), 280 nm, and Visible (Vis) radiation, 400 nm. Therefore, a comparative study was performed to investigate the effect of Vis radiation on %COD removal, micropollutants removal, and disinfection of municipal wastewater. Micropollutants present in municipal wastewater were effectively oxidized/degraded with the highest reduction rate between 100% and 80% under the influence of UVc and Vis radiation respectively by the PEC treatment process. Disinfection of various microorganisms present in the wastewater with the effect of UVc and Vis assisted PEC treatment was also monitored. Overall, 75–80% of the disinfection of municipal wastewater was contributed by the modified multi-layer catalytic anode. The UVc in the PEC system, contributes approximately 20–25% to the overall disinfection of municipal wastewater.
|
|
