| 1. |
- Adloff, C, et al.
(författare)
-
Diffractive photoproduction of psi(2S) mesons at HERA
- 2002
-
Ingår i: Physics Letters. Section B: Nuclear, Elementary Particle and High-Energy Physics. - 0370-2693. ; 541:3-4, s. 251-264
-
Tidskriftsartikel (refereegranskat)abstract
- Results on diffractive photoproduction of psi(2S) mesons are presented using data collected between 1996 and 2000 with the H1 detector at the HERA ep collider. The data correspond to an integrated luminosity of 77 pb(-1). The energy dependence of the diffractive psi(2S) cross section is found to be similar to or possibly somewhat steeper than that for J/psi mesons. The dependences of the elastic and proton dissociative psi(2S) photoproduction cross sections on the squared momentum transfer t at the proton vertex are measured. The t-dependence of the elastic channel, parametrised as e(bt), yields b(el)(psi(2S)) = (4.31 +/- 0.57 +/- 0.46) GeV-2, compatible with that of the J/psi. For the proton dissociative channel the result b(pd)(psi(2S)) = (0.59 +/- 0.13 +/- 0.12) GeV-2 is 2.3 standard deviations smaller than that measured for the J/psi. With proper account of the individual wavefunctions theoretical predictions based on perturbative QCD are found to describe the measurements well. (C) 2002 Elsevier Science B.V. All rights reserved.
|
|
| 2. |
- Adloff, C, et al.
(författare)
-
Inelastic leptoproduction of J/psi mesons at HERA
- 2002
-
Ingår i: European Physical Journal C. Particles and Fields. - : Springer Science and Business Media LLC. - 1434-6044. ; 25:1, s. 41-53
-
Tidskriftsartikel (refereegranskat)abstract
- The leptoproduction of J/psi mesons is studied in inelastic reactions for four momentorri transfers 2 < Q(2) < 100GeV(2). The data were taken with the H1 detector at the electron proton collider HERA and correspond to an integrated luminosity of 77 pb(-1). Single differential and double differential cross sections are measured with increased precision compared with previous analyses. New leading order calculations within the non-relativistic QCD factorisation approach including colour octet and colour singlet contributions are compared with the data and are found to give a reasonable description of most distributions. An exception is the shape of the distribution in the J/psi fractional energy. z, which deviates significantly from that of the data. Comparisons with photoproduction are made and the polarisation of the produced J/psi meson is analysed.
|
|
| 3. |
- Adloff, C, et al.
(författare)
-
Inelastic photoproduction of J/psi mesons at HERA
- 2002
-
Ingår i: European Physical Journal C. Particles and Fields. - : Springer Science and Business Media LLC. - 1434-6044. ; 25:1, s. 25-39
-
Tidskriftsartikel (refereegranskat)abstract
- An analysis of inelastic photoproduction of J/psi mesons is presented using data collected at the ep collider HERA corresponding to an integrated luminosity of above 80 pb(-1), Differential and double I < P-t/psi(2) < differential cross sections are measured in a wide kinematic region: 60 < W-gammap < 260 GeV, 1 p(t,psi)(2) < 60 GeV2 and 0.05 < z < 0.9. where z is the fraction of the energy of the exchanged photon transferred to the J/psi meson in the rest frame of the target proton. Cross sections at z less than or similar to 0.3 are presented for the first time. Theoretical calculations within the Colour Singlet Model at NLO for direct photon processes are shown to give a good description of the data in the medium z region (0.3 < z < 0.9) up to the highest p(t,psi)(2) values. A calculation using a k(t) factorisation approach in LO in the Colour Singlet Model is also able to describe these data. The data in the full z range are also compared to LO calculations within a non-relativistic QCD framework including colour octet and colour singlet contributions for direct and resolved photons. It seems possible to reconcile data and theory with modest contributions from colour octet processes. The polarisation of the J/psi meson is measured as a function of z and p(t,psi) and is reasonably described by the theoretical predictions.
|
|
| 4. |
- Adloff, C, et al.
(författare)
-
Measurement of dijet cross sections in photoproduction at HERA
- 2002
-
Ingår i: European Physical Journal C. Particles and Fields. - : Springer Science and Business Media LLC. - 1434-6044. ; 25:1, s. 13-23
-
Tidskriftsartikel (refereegranskat)abstract
- Dijet cross sections as functions of several jet observables are measured in photoproduction using the HI detector at HERA. The data sample comprises e(+)p data with an integrated luminosity of 319 pb(-1). Jets are selected using the inclusive k(perpendicular to) algorithm with a minimum transverse energy of 25 GeV for the leading jet. The phase space covers longitudinal proton momentum fraction x(p) and photon longitudinal momentum fraction x(gamma) in the ranges 0.05 < x(p) < 0.6 and 0.1 < x(gamma) < 1. The predict ions of next-to-leading order perturbative QCD, including recent photon and proton parton densities, are found to be compatible with the data in a wide kinematical range.
|
|
| 5. |
- Adloff, C, et al.
(författare)
-
Measurement of inclusive jet cross-sections in deep-inelastic ep scattering at HERA
- 2002
-
Ingår i: Physics Letters. Section B: Nuclear, Elementary Particle and High-Energy Physics. - 0370-2693. ; 542:3-4, s. 193-206
-
Tidskriftsartikel (refereegranskat)abstract
- A measurement of inclusive jet cross-sections in deep-inelastic ep scattering at HERA is presented based on data with an integrated luminosity of 21.1 pb(-1). The measurement is performed for photon virtualities Q(2) between 5 and 100 GeV2, differentially in Q(2), in the jet transverse energy E-T, in E-T(2)/Q(2) and in the pseudorapidity eta(lab). With the renormalization scale mu(R) = E-T, perturbative QCD calculations in next-to-leading order (NLO) give a good description of the data in most of the phase space. Significant discrepancies are observed only for jets in the proton beam direction with ET below 20 GeV and Q2 below 20 GeV2. This corresponds to the region in which NLO corrections are largest and further improvement of the calculations is thus of particular interest.
|
|
| 6. |
- Adloff, C, et al.
(författare)
-
Search for QCD instanton-induced processes in deep-inelastic scattering at HERA
- 2002
-
Ingår i: European Physical Journal C. Particles and Fields. - : Springer Science and Business Media LLC. - 1434-6044. ; 25:4, s. 495-509
-
Tidskriftsartikel (refereegranskat)abstract
- Signals of QCD instanton-induced processes are searched for in deep-inelastic scattering (DIS) at the electron-proton collider HERA in a kinematic region defined by the Bjorken-scaling variables x > 10(-3), 0.1 < y < 0.6 and photon virtualities 10 less than or similar to Q(2) < 100 GeV2. Several observables characterising hadronic final state properties of QCD instanton-induced events are exploited to identify a potentially instanton-enriched domain. While an excess of events with instanton-like topology is observed it cannot be claimed significant given the uncertainty of the standard DIS background simulation. Upper limits on the cross-section for instanton-induced processes of between 60 pb and 1000 pb are set dependent on the kinematic domain considered. The data do not exclude the cross-section predicted by instanton perturbation theory for small instanton sizes. At large instanton sizes a naive extrapolation of instanton perturbation theory yields a cross-section in the range of sensitivity of this study. Such a cross-section is not observed, in agreement with non-perturbative lattice simulations of the QCD vacuum.
|
|
| 7. |
- Adloff, C, et al.
(författare)
-
A measurement of the t dependence of the helicity structure of diffractive rho meson electroproduction at HERA
- 2002
-
Ingår i: Physics Letters. Section B: Nuclear, Elementary Particle and High-Energy Physics. - 0370-2693. ; 539:1-2, s. 25-39
-
Tidskriftsartikel (refereegranskat)abstract
- The helicity structure of the diffractive electroproduction of rho mesons, e + p --> e + rho + Y, is studied in a previously unexplored region of large four-momentum transfer squared at the proton vertex, t: 0 < t' < 3 GeV2, where t' = - min. The data used are collected with the HI detector at HERA in the kinematic domain 2.5 < Q(2) < 60 GeV2, 40 < W < 120 GeV No t dependence of the r(00)(04) spin density matrix element is found. A significant t dependent helicity non-conservation from the virtual photon to the rho meson is observed for the spin density matrix element combinations r(00)(5) + 2r(11)(5) and r(00)(1) + 2r(11)(1). These t dependences are consistently described by a perturbative QCD model based on the exchange of two gluons.
|
|
| 8. |
- Adloff, C, et al.
(författare)
-
Energy flow and rapidity gaps between jets in photoproduction at HERA
- 2002
-
Ingår i: European Physical Journal C. Particles and Fields. - : Springer Science and Business Media LLC. - 1434-6044. ; 24:4, s. 517-527
-
Tidskriftsartikel (refereegranskat)abstract
- Dijet events in photon-proton collisions in which there is a large pseudorapidity separation, Deltaeta > 2.5 between the two highest E-T jets are studied with the H1 detector at HERA. The inclusive dijet cross sections are measured as functions of the longitudinal momentum fractions of the proton and photon which participate in the production of the jets, x(p)(jets) and x(gamma)(jets) respectively, Deltaeta, the pseudorapidity P separation between the two highest E-T jets, and E-T(gap), the total summed transverse energy between the jets. Rapidity gap events are defined as events in which E-T(gap) is less than E-T(cut), for E-T(cut) varied between jets 0.5 and 2.0 GeV. The fraction of dijet events with a rapidity gap is measured differentially in Deltaeta, x(p)(jets) and x(gamma)(jets). An excess of events with rapidity gaps at low values of E-T(cut) is observed above the expectation from standard photoproduction processes. This excess can be explained by the exchange of a strongly interacting colour singlet object between the jets.
|
|
| 9. |
- Adloff, C, et al.
(författare)
-
Measurement of D*(+/-) meson production and F-2(c) in deep-inelastic scattering at HERA
- 2002
-
Ingår i: Physics Letters. Section B: Nuclear, Elementary Particle and High-Energy Physics. - 0370-2693. ; 528:3-4, s. 199-214
-
Tidskriftsartikel (refereegranskat)abstract
- The inclusive production of D*+/-(2010) mesons in deep-inelastic scattering is studied with the HI detector at HERA. In the kinematic region 1 < Q(2) < 100 GeV2 and 0.05 < y < 0.7 an e(+) p cross section for inclusive D*+/- meson production of 8.50 +/- 0.42(stat.)(-100)(+1.21)(syst.) nb is measured in the visible range p(tD*) > 1.5 GeV and eta(D*) < 1.5. Single and double differential inclusive D*+/- meson cross sections are compared to perturbative QCD calculations in two different evolution schemes, The charm contribution to the proton structure, F-c(2)(x, Q(2)), is determined by extrapolating the visible charm cross section to the full phase space. This contribution is found to rise from about 10% at Q(2) = 1.5 GeV2 to more than 25% at Q(2) = 60 GeV2 corresponding to x values ranging from 5 x 10(-5) to 3 x 10(-3). (C) 2002 Elsevier Science B.V. All rights reserved.
|
|
| 10. |
- Adloff, C, et al.
(författare)
-
Measurement of dijet electroproduction at small jet separation
- 2002
-
Ingår i: European Physical Journal C. Particles and Fields. - : Springer Science and Business Media LLC. - 1434-6044. ; 24:1, s. 33-41
-
Tidskriftsartikel (refereegranskat)abstract
- Deep-inelastic scattering data in the range 150 < Q(2) < 35000 GeV2 are used to investigate the minimum jet separation necessary to allow accurate description of the rate of dijet production using next-to-leading order perturbative QCD calculations. The required jet separation is found to be small, allowing about 1/3 of DIS data to be classified as dijet, as opposed to approximately 1/10 with more typical jet analyses. A number of precision measurements made using this dijet sample are well described by the calculations. The data are also described by the combination of leading order matrix elements and parton showers, as implemented in the QCD based Monte Carlo model RAPGAP.
|
|
| 11. |
- Adloff, C, et al.
(författare)
-
Search for excited neutrinos at HERA
- 2002
-
Ingår i: Physics Letters. Section B: Nuclear, Elementary Particle and High-Energy Physics. - 0370-2693. ; 525:1-2, s. 9-16
-
Tidskriftsartikel (refereegranskat)abstract
- We present a search for excited neutrinos using e(-) p data taken by the H1 experiment at HERA at a center-of-mass energy of 318 GeV with an integrated luminosity of 15 pb(-1). No evidence for excited neutrino production is found. Mass dependent exclusion limits are determined for the ratio of the coupling to the compositeness scale, f/Lambda, independently of the relative couplings to the SU(2) and U(1) gauge bosons. These limits extend the excluded region to higher masses than has been possible in previous searches at other colliders.
|
|
| 12. |
- Adloff, C, et al.
(författare)
-
Search for odderon-induced contributions to exclusive pi(0) photoproduction at HERA
- 2002
-
Ingår i: Physics Letters. Section B: Nuclear, Elementary Particle and High-Energy Physics. - 0370-2693. ; 544:1-2, s. 35-43
-
Tidskriftsartikel (refereegranskat)abstract
- A search for contributions to the reaction ep --> epi(0)N* from photon-odderon fusion in the photoproduction regime at HERA is reported, at an average photon-proton centre-of-mass energy = 215 GeV. The measurement proceeds via detection of the pi(0) decay photons, a leading neutron from the N* decay, and the scattered electron. No pi(0) signal is observed and an upper limit on the cross section for the photon-odderon fusion process of sigma(gammap --> pi(0)N*) < 49 nb at the 95% confidence level is derived, integrated over the experimentally accessible range of the squared four-momentum transfer at the nucleon vertex 0.02 < < 0.3 GeV2. This excludes a recent prediction from a calculation based on a non-perturbative QCD model of a photon-odderon fusion cross section above 200 nb. (C) 2002 Elsevier Science B.V. All rights reserved.
|
|
| 13. |
- Adloff, C, et al.
(författare)
-
Search for excited electrons at HERA
- 2002
-
Ingår i: Physics Letters. Section B: Nuclear, Elementary Particle and High-Energy Physics. - 0370-2693. ; 548:1-2, s. 35-44
-
Tidskriftsartikel (refereegranskat)abstract
- A search for excited electron (e*) production is described in which the electroweak decays e* --> egamma, e* --> eZ and e* ---> nuW are considered. The data used correspond to an integrated luminosity of 120 pb(-1) taken in e(+/-)p collisions from 1994 to 2000 with the H1 detector at HERA at centre-of-mass energies of 300 and 318 GeV. No evidence for a signal is found. Mass dependent exclusion limits are derived for the ratio of the couplings to the compositeness scale, f/A. These limits extend the excluded region to higher masses than has been possible in previous direct searches for excited electrons. (C) 2002 Published by Elsevier Science B.V.
|
|
| 14. |
- Chen, Chao, et al.
(författare)
-
A Model Study of Inclusions Deposition, Macroscopic Transport, and Dynamic Removal at Steel–Slag Interface for Different Tundish Designs
- 2016
-
Ingår i: Metallurgical and materials transactions. B, process metallurgy and materials processing science. - : Springer. - 1073-5615 .- 1543-1916. ; 47:3, s. 1916-1932
-
Tidskriftsartikel (refereegranskat)abstract
- This paper presents computational fluid dynamics (CFD) simulation results of inclusions macroscopic transport as well as dynamic removal in tundishes. A novel treatment was implemented using the deposition velocity calculated by a revised unified Eulerian deposition model to replace the widely used Stokes rising velocity in the boundary conditions for inclusions removal at the steel–slag interface in tundishes. In this study, the dynamic removal for different size groups of inclusions at different steel–slag interfaces (smooth or rough) with different absorption conditions at the interface (partially or fully absorbed) in two tundish designs was studied. The results showed that the dynamic removal ratios were higher for larger inclusions than for smaller inclusions. Besides, the dynamic removal ratio was higher for rough interfaces than for smooth interfaces. On the other hand, regarding the cases when inclusions are partially or fully absorbed at a smooth steel–slag interface, the removal ratio values are proportional to the absorption proportion of inclusions at the steel–slag interface. Furthermore, the removal of inclusions in two tundish designs, i.e., with and without a weir and a dam were compared. Specifically, the tundish with a weir and a dam exhibited a better performance with respect to the removal of bigger inclusions (radii of 5, 7, and 9 μm) than that of the case without weir and dam. That was found to be due to the strong paralleling flow near the middle part of the top surface. However, the tundish without weir and dam showed a higher removal ratio of smaller inclusions (radius of 1 μm). The reason could be the presence of a paralleling flow near the inlet zone, where the inclusions deposition velocities were much higher than in other parts.
|
|
| 15. |
- Alekseeva, Ekaterina, et al.
(författare)
-
Effect of Inclusions on the Corrosion Properties of the Nickel-Based Alloys 718 and EP718
- 2020
-
Ingår i: Metals. - : MDPI. - 2075-4701. ; 10:9
-
Tidskriftsartikel (refereegranskat)abstract
- Inclusions in steels and alloys are known to lower the resistance to deformation, as well as to lower the mechanical, corrosion and other properties. Studies of inclusions in nickel-based alloys are important since these materials could suffer from corrosion degradation in harsh operational conditions. This, in fact, could lead to a pitting initiation around the inclusions. Two industrial Ni-based alloys (alloy 718 and EP718) were investigated to determine the harmful effects of different inclusions on the corrosion resistance of Ni-based alloys. Specifically, the inclusion characteristics (such as composition, morphology, size, number and location) were determined for inclusions collected on film filters after electrolytic extraction and dissolution of a metal matrix around different inclusions on surfaces of metal samples after electrolytic extraction (EE). It was found that both Ni-based alloys contain various inclusion types: carbides (large size NbTi-C and small multicomponent carbides), nitrides TiNb-N and sulphides (TiNb-S in EP718 alloy). The most harmful effects on the corrosion resistance of metal were detected around sulphides and small carbides containing Mo, W, Cr. Dissolution effects were also observed around large carbides and nitrides, especially around inclusions larger than 10 mu m. Moreover, the dissolution of a matrix around inclusions and clusters located on the grain boundaries were found to be 2.1-2.7 times larger compared to inclusions found inside of grains of the given alloy samples.
|
|
| 16. |
- Alexis, J., et al.
(författare)
-
Modeling of a DC electric arc furnace - Heat transfer from the arc
- 2000
-
Ingår i: ISIJ International. - : Iron and Steel Institute of Japan. - 0915-1559 .- 1347-5460. ; 40:11, s. 1089-1097
-
Tidskriftsartikel (refereegranskat)abstract
- A mathematical model describing heat and fluid flow in an electric are has been developed and used to predict heat transfer from the are to the steel bath in a DC Electric Are Furnace. The are model takes he separate contributions to the heat transfer from each involved mechanism into account, i.e. radiation, convection, condensation and energy transported by electrons. The model predicts heat transfer for different currents and are lengths. Model predictions show that are efficiency is higher for lower power input. The model also predicts shear stresses and current density distribution at the steel surface. This information can be used as boundary condition input to simulate the effect of heating with electrodes in a DC EAF on the heat and fluid flow in the steel bath.
|
|
| 17. |
- Almcrantz, M., et al.
(författare)
-
Determination of inclusion characteristics in the Asea-SKF process using the modified spark-induced OES technique as a complement in studying the influence of top slag composition
- 2005
-
Ingår i: Steel Research International. - : Wiley. - 1611-3683 .- 1869-344X. ; 76:9, s. 624-634
-
Tidskriftsartikel (refereegranskat)abstract
- The spark-induced modified optical emission spectroscopy (OES) technique developed by Ovako Steel makes it possible to rapidly determine inclusion characteristics in steel samples. In earlier investigations using the modified spark-induced OES technique for steel samples taken from billets, predicted oxygen contents agreed well with results from conventional melt extraction analyses. In this investigation, samples taken during ladle treatment in an ASEA-SKF ladle furnace were analysed using the modified OES technique. When comparing the results with inclusion characteristics determined by conventional analysis, similar trends were found. Plant trials were also carried out where three different top slag compositions were used. The purpose was to evaluate if the modified OES technique can be used to study the effect of changes in the refining operation on inclusion characteristics. Results indicated that the modified OES technique could be used to determine the effect of a changed slag composition on the inclusion characteristics in the steel. Since the modified OES method provides rapid feedback of inclusion characteristics, it has the potential of being used for faster optimisation of ladle refining operations.
|
|
| 18. |
- Andersson, Annika, et al.
(författare)
-
A study of some elemental distributions between slag and hot metal during tapping of the blast furnace
- 2004
-
Ingår i: Steel research. - : Wiley. - 0177-4832 .- 1611-3683. ; 75:5, s. 294-301
-
Tidskriftsartikel (refereegranskat)abstract
- This paper investigates the distribution of elements between slag and hot metal from a blast furnace through calculation of distribution coefficients from actual production data. First, samples of slag and hot metal tapped from a commercial blast furnace were taken continually at 10-minute intervals for a production period of 68 hours. Distribution coefficients of manganese, silicon, sulphur and vanadium were then calculated from the results of the sample analyses. A major conclusion drawn from examination of the results was that the behaviour of the studied elements was as could be expected when approaching the equilibrium reactions from thermodynamic theory. The distributions of the elements in the slag-metal system showed clear tendencies which did not appear to be influenced by the operational conditions of the furnace. For example, for manganese, vanadium and sulphur, it was found that a higher basicity led to a decreased distribution coefficient L-Mn and L-V, but an increased L-S, which is according to theory. Another observed relationship was that slag basicity increased with an increased carbon content in the hot metal, which indicated that SiO2 was reduced to [Si] when the oxygen potential decreased. Furthermore, it was found that sulphur and silica behaviour likened that of acidic slag components, while the manganese oxide and vanadium oxide behaviour was similar to that of basic slag components.
|
|
| 19. |
- Andersson, Annika J., et al.
(författare)
-
Variation in hot metal and stag composition during tapping of blast furnace
- 2004
-
Ingår i: Ironmaking & steelmaking. - : Informa UK Limited. - 0301-9233 .- 1743-2812. ; 31:3, s. 216-226
-
Tidskriftsartikel (refereegranskat)abstract
- To determine the quality of the hot metal and the thermal conditions inside the blast furnace, the composition of the hot metal and slag must be known. Obtaining representative metal and slag samples during tapping is thus highly important to blast furnace operation. The study covered in the present report focused on hot metal and slag composition variation during tapping from a commercial blast furnace. From the results, optimal sampling time points for obtaining elemental concentrations that can be taken as representative for the whole tapping sequence were identified. It was furthermore concluded, that the reliability of hot metal composition data is significantly improved by averaging elemental concentrations determined from two samples, each taken at a particular time point. One sampling, however, was found to be adequate for slag. Results from the study also showed a fairly strong correlation between amounts of silicon and carbon, sulphur and carbon, and silicon and sulphur in the hot metal, while a weaker correlation between hot metal temperature and each of these elements was observed.
|
|
| 20. |
|
|
| 21. |
- Andersson, Nils Å. I., et al.
(författare)
-
An in-Depth Model-Based Analysis of Decarburization in the AOD Process
- 2012
-
Ingår i: Steel Research International. - : Wiley. - 1611-3683 .- 1869-344X. ; 83:11, s. 1039-1052
-
Tidskriftsartikel (refereegranskat)abstract
- A previously reported flow and reaction model for an argon-oxygen decarburization converter was extended to also include a thermodynamic description. An in-depth study of the model results has been conducted to answer how concentrations of elements and species in the converter at different locations change with time. This may contribute to the understanding of the mechanisms of the refining procedure in the argon-oxygen decarburization process. The refining procedure includes several step-wise changes of an injected gas composition to higher and higher inert gas ratio, called step changes. A step change leads to a decreased partial pressure of carbon monoxide and maintains the decarburization at a higher efficiency. The results shows early and late concentration profiles for the first injection step and suggests a way to determine when a step change should be made. Moreover, the step change could be determined by calculating the carbon concentration profiles and deciding when the carbon concentration gradients start to diminish.
|
|
| 22. |
|
|
| 23. |
|
|
| 24. |
- Arzpeyma, Niloofar, et al.
(författare)
-
Development of a Mass and Energy Balance Model and Its Application for HBI Charged EAFs
- 2020
-
Ingår i: Metals. - : MDPI. - 2075-4701. ; 10:3
-
Tidskriftsartikel (refereegranskat)abstract
- A static mass and energy balance model combined with a MgO saturation slag model is developed for electric arc furnaces. The model parameters including distribution ratios and dust factors are calibrated for a specific furnace using experimental data. Afterward, the model is applied to study the effect of charging different amounts of hot briquetted iron (HBI) on energy consumption, charged slag former amount, and slag composition. The following results were obtained per each 1% increase of HBI additions: (i) a 0.16 Nm(3)/t decrease in the amount of injected oxygen for metal oxidation, (ii) a 1.29 kWh/t increase in the electricity consumption, and (iii) a 34 kg increase in the amount of the slag.
|
|
| 25. |
- Bai, Haitong, et al.
(författare)
-
An Experimental and Numerical Study of Swirling Flow Generated by TurboSwirl in an Uphill Teeming Ingot Casting Process
- 2016
-
Ingår i: ISIJ International. - : Iron and Steel Institute of Japan. - 0915-1559 .- 1347-5460. ; 56:8, s. 1404-1412
-
Tidskriftsartikel (refereegranskat)abstract
- A swirling flow has been demonstrated to be beneficial for making the flow pattern even and to reduce turbulence during filling in ingot casting. A new swirling flow generation device, TurboSwirl, was applied to improve the flow pattern of the liquid steel as it flows into the mold so that a more stable flow could be obtained. A water model was built including the TurboSwirl with different flaring angles of the divergent nozzle, according to a former numerical study indicating that a much more beneficial flow pattern could be obtained by reducing the flaring angle. To validate the mathematical model, the air-core vortex formed in the water model experiment was used, and the length of the vortex was measured and compared to the numerical predictions. Different turbulence models including the standard k-epsilon, realizable k-epsilon and Reynolds stress model were tested. It was found that only the Reynolds stress model could most accurately simulate the high swirling flow including a vortex. In addition, the radial velocity of the water around the vortex was measured by an ultrasonic velocity profiler (UVP). The experimental results revealed a high turbulence of the swirling flow and strong fluctuations of the vortex. The radial velocity of the water around the upper part of the vortex could be predicted well compared to the experimental results by the UVP measurements.
|
|
| 26. |
- Bai, Haitong, et al.
(författare)
-
Experimental Validation and Numerical Analysis of the Swirling Flow in a Submerged Entry Nozzle and Mold by using a Reverse TurboSwirl in a Billet Continuous Casting Process
- 2016
-
Ingår i: Steel Research International. - : Wiley. - 1611-3683 .- 1869-344X.
-
Tidskriftsartikel (refereegranskat)abstract
- As an alternative to some traditional methods to generate a swirling flow in the continuous casting process, the use of a new swirling flow generator, TurboSwirl, was studied. Specifically, a reversed TurboSwirl device was designed as part of a submerged entry nozzle (SEN) for a round billet continuous casting process. Mathematical modelling was used to investigate this new design and a water model experiment was carried out to validate the mathematical model. The predicted velocities by the turbulence models: realizable k-ε model, Reynold stress model (RSM) and detached eddy simulation (DES) were compared to the measured results from an ultrasound velocity profile (UVP) method. The DES model could give the best prediction inside the SEN and had a deviation less than 3.1% compared to the measured results. Moreover, based on the validated mathematical model and the new design of the SEN, the effect of the swirling flow generated by the reverse TurboSwirl on the flow field of the SEN and mold was compared to the design of the electromagnetic swirl flow generator (EMSFG). A very strong swirling flow in the SEN and a stable flow pattern in the mold could be obtained by the reverse TurboSwirl compared to the EMSFG.
|
|
| 27. |
- Bai, Haitong, et al.
(författare)
-
Numerical Study of the Application for the Divergent Reverse TurboSwirl Nozzle in the Billet Continuous Casting Process
-
Annan publikation (övrigt vetenskapligt/konstnärligt)abstract
- The swirling flow is demanded from the submerged entry nozzle (SEN) to the mold for the continuous casting process. A new design of the SEN is applied by using the reverse TurboSwirl. The TurboSwirl has been proved that it can provide a more stable flow pattern of the liquid steel in the mold. It also can supply a strong enough swirling flow compared to other swirling flow generation methods. Furthermore, a divergent nozzle is added to replace the bottom part of the straight SEN. This new divergent reverse TurboSwirl nozzle (DRTSN) could gain a more beneficial flow pattern in the mold compared to the straight nozzle. The numerical results reveals that a stronger swirling flow can be gained at the SEN outlet with a calmer flow field and active meniscus flow. It is also found that the swirl intensity in the SEN is independent of the casting speed. Lower casting speed is more desired due to a lower maximum wall shear stress. The DRTSN is connected to the tundish by an elbow and a horizontal runner. Longer horizontal runner can supply a more uniform velocity profile and symmetrical flow pattern in the mold.
|
|
| 28. |
- Bi, Yanyan, et al.
(författare)
-
Evolution of Different Inclusions during Ladle Treatment and Continuous Casting of Stainless Steel
- 2013
-
Ingår i: ISIJ International. - : Iron and Steel Institute of Japan. - 0915-1559 .- 1347-5460. ; 53:12, s. 2099-2109
-
Tidskriftsartikel (refereegranskat)abstract
- The inclusions and clusters in steel samples of two similar steel grades of high-silicon non-calcium treated (HSiNC) stainless steels were investigated and compared during ladle treatment and continuous casting. Samples of liquid steel and slag were taken at different stages of the ladle treatment and casting during two plant trials: Low Al steel (LAI) and High Al steel (HAI). After electrolytic extraction of the steel samples, characteristics of inclusions and clusters (such as morphology, composition, size and number) were investigated in three dimensions (3D) by SEM in combination with EDS. Moreover, the composition of typical inclusions and clusters was analyzed on a polished cross section of steel samples. Spherical (SP), irregular and regular (IR) inclusions and clusters (CL) were observed in the samples from both heats. It was found that the morphology and composition of inclusions and clusters in both heats were significantly changed during the ladle treatment and casting. Most of inclusions (44-98%) in a Low Al steel are MgO-CaO-SiO2-Al2O3 spherical inclusions. The compositions of IR inclusions and clusters in steel samples of a High Al steel were mostly MgO center dot Al2O3 spinet, but also the complex SP inclusions containing Al2O3-MgO-CaO-SiO2. In addition, phase stability diagram based on Darken's quadratic formalism and Redlich-Kister type polynomial was estimated for both heats at a non-infinite solution.
|
|
| 29. |
- Bi, Yanyan, et al.
(författare)
-
Investigations of inclusions in ferrochromium alloys
- 2014
-
Ingår i: Ironmaking & steelmaking. - 0301-9233 .- 1743-2812. ; 41:10, s. 756-762
-
Tidskriftsartikel (refereegranskat)abstract
- Ferrochromium alloys are commonly added during different stages of steelmaking processes according to the specific steel grade being produced. Depending upon the ferrochromium quality, the addition can also lead to a supply of deleterious inclusions to the liquid steel. Therefore, the number, size, morphology and composition of inclusions in LCFeCr and HCFeCr alloys were investigated. The alloy samples were first treated with electrolytic extraction, followed by filtration to gather the inclusions on a film filter. Thereafter, the characteristics of the inclusions and clusters were investigated in three dimensions by SEM in combination with energy dispersive spectroscopy. The results show that the main inclusion types found in LCFeCr alloys are different to those found in HCFeCr alloys. More specifically, the inclusions in LCFeCr alloys were found to consist of Si-Cr-O and Cr-O oxides as well as intermetallic Cr-Fe inclusions. Moreover, the inclusions in HCFeCr alloys were found to consist of Cr-Mn-S, Cr-C-N, Si-Al-Ca-Mg-O and Ca-O-P inclusions. Overall, the inclusions can be divided into two categories depending on the melting point. Furthermore, the possible transformation of different inclusions after their addition to the liquid steel is discussed.
|
|
| 30. |
- Bi, Yanyan, et al.
(författare)
-
Three-dimensional determinations of the non-metallic inclusions in different ferroalloys
- 2014
-
Konferensbidrag (refereegranskat)abstract
- Ferroalloys are commonly used in the steel industry to alloy or deoxidize the steel during the secondary steelmaking process before casting. Depending upon the ferroalloy quality, the addition can also lead to a supply of deleterious inclusions to the liquid steel. Thus, the number, morphology, size and composition of inclusions in six different ferroalloys (FeTi, FeNb, FeSi, SiMn LCFeCr and HCFeCr) were investigated. This was done in three dimensions (3D) by using SEM in combination with EDS after electrolytic extraction of the ferroalloy samples. Moreover, statistics of extreme values (SEV) were used to determine the largest size of inclusions.
|
|
| 31. |
- Bi, Yanyan, et al.
(författare)
-
Three Dimensional Evaluations of REM Clusters in Stainless Steel
- 2014
-
Ingår i: ISIJ International. - : Iron and Steel Institute of Japan. - 0915-1559 .- 1347-5460. ; 54:6, s. 1266-1273
-
Tidskriftsartikel (refereegranskat)abstract
- It is known that clusters in liquid steel have a harmful effect on the casting process and the quality of the final steel product. In this study, clusters. of rare earth metals (REM) were investigated in steel samples of a S30185 stainless steel grade from a pilot trial (PT, 250 kg) and from an industrial heat (IH, 100 t). Samples were taken from the liquid steel at different holding times after the addition of mischmetal. Thereafter, REM clusters collected on film filters after electrolytic extraction and filtration were investigated in three dimensions (3D) by SEM in combination with EDS. The morphology, composition, number and size of clusters in PT and IH steel samples were analyzed and compared as a function of holding time. It was found that typical clusters with regular and irregular inclusions were the main type of clusters (69%-98%) in all PT and IH steel samples. The composition of inclusions in clusters corresponded mostly to REM-oxides. The size of clusters that were observed in different samples varied mainly from 2 to 23 mu m. In addition, the size and number of most clusters in PT are larger than those in IH samples. Furthermore, the formation mechanisms and evolution of different type of REM clusters were discussed in both PT and IH heats.
|
|
| 32. |
- Bi, Yanyan, et al.
(författare)
-
Three-dimensional investigations of inclusions in ferroalloys
- 2014
-
Ingår i: Steel Research International. - : Wiley. - 1611-3683 .- 1869-344X. ; 85:4, s. 659-669
-
Tidskriftsartikel (refereegranskat)abstract
- As the requirements on material properties increase, there has been a demand on an additional knowledge on the effect of impurities in the ferroalloys on the properties. Thus, the number, morphology, size, and composition of inclusions in four different ferroalloys (FeTi, FeNb, FeSi, and SiMn) were investigated. This was done in three dimensions (3D) by using scanning electron microscopy in combination with energy dispersive spectroscopy after electrolytic extraction of the ferroalloy samples. The non-metallic and metallic inclusions were successfully analyzed on the surface of film filter. Thereafter, the particle size distribution was plotted for most of the non-metallic inclusions. The non-metallic inclusions were found to be REM oxides in FeTi, FeSi, and SiMn, Al2O3, Ti-Nb-S-O oxides in FeNb and silicon oxides in SiMn. Moreover, the intermetallic inclusions were found to be a Ti-Fe phase in FeTi, Ca-Si, and Fe-Si-Ti phases in FeSi and a Mn-Si phase in SiMn. In addition, the almost pure single metallic phases were found to be Ti in FeTi, Nb in FeNb, and Si in FeSi. As the requirements on material properties increase, the effect of impurities in ferroalloys on the steelmaking process is increasingly becoming more important. The characteristic of inclusions (morphology, number, size, and composition) in ferroalloys investigated in three-dimensional after electrolytic extraction is a good method for studying the evolution of inclusions during steelmaking.
|
|
| 33. |
|
|
| 34. |
- Bu, Junfu, et al.
(författare)
-
Ionic conductivity of dense BaZr(0.5)Ce(0.3)Ln(0.2)O(3-delta) (Ln = Y, Sm, Gd, Dy) electrolytes
- 2014
-
Ingår i: Journal of Power Sources. - : Elsevier BV. - 0378-7753 .- 1873-2755. ; 272, s. 786-793
-
Tidskriftsartikel (refereegranskat)abstract
- BaZr(0.5)Ce(0.3)Ln(0.2)O(3-delta) (BZCLn532, Ln = Y, Sm, Gd, Dy) based electrolytes were successfully synthesized by a cost-effective solid-state reactive sintering (SSRS) method while using 1.0 wt.% NiO as a sintering aid. Dense pellets of BZCLn532 compounds can be prepared at sintering temperatures of 1600 degrees C (BZCY532) and 1400 degrees C (BZCS532, BZCG532 and BZCD532). The conductivities of the dense BZCLn532 ceramics were tested in dry and wet air at temperatures of 700 degrees C-200 degrees C. On the basis of the obtained results, it could be concluded that the BZCY532-based electrolyte show promise for use as oxygen-ion conductors and proton conductors in intermediate temperature solid oxide fuel cells (ITSOFCs).
|
|
| 35. |
|
|
| 36. |
- Bu, Junfu, et al.
(författare)
-
Preparation of 30 mol.% Y-doped hafnia (Hf0.7Y0.3O2-delta) using a modified solid-state reaction method
- 2015
-
Ingår i: Ceramics International. - : Elsevier BV. - 0272-8842 .- 1873-3956. ; 41:2, s. 2611-2615
-
Tidskriftsartikel (refereegranskat)abstract
- A pure and well-crystallized Hf0.7Y0.3O2-delta (YSH) powder was synthesized using a modified solid-state reaction method. Water-based milling and freeze drying process were implemented to facilitate powder synthesis and final densification process. The improved powder performance, in aspects of phase development and sintering behaviour, was investigated by systematic comparison between different powder processing procedures. Dense YSH ceramic material with a relative density of 0.975 was successfully obtained using conventional sintering at 1650 degrees C for 10 h. XRD, SEM and EDS were employed to characterize the synthesized powder and dense YSH ceramics. Dense YSH ceramic possesses a fluorite cubic structure with an a value of 5.1406 angstrom, and the ionic radius of Y3+ in YSH was determined to be 0.1006 nm.
|
|
| 37. |
- Bu, Junfu, et al.
(författare)
-
Sintering behaviour of the protonic conductors BaZr(x)Ce(0.8-x)Ln(0.2)O(3-delta) (x=0.8, 0.5, 0.1; Ln=Y, Sm, Gd, Dy) during the solid-state reactive-sintering process
- 2015
-
Ingår i: Ceramics International. - : Elsevier BV. - 0272-8842 .- 1873-3956. ; 41:2, s. 2558-2564
-
Tidskriftsartikel (refereegranskat)abstract
- The protonic conductors BaZr(x)Ce(0.8-x)Ln(0.2)O(3-delta) (x=0.8, 0.5, 0.1; Ln=Y, Sm, Gd, Dy) were successfully prepared using a solid-state reactive-sintering method. NiO (1 wt.%) was added as a sintering aid, and it was proven that NiO produced tremendous enhancement in the densification process. The morphologies of the variously doped BaZr(0.8)Ln(0.2)O(3-delta), BaZr(0.5)Ce(0.3)Ln(0.2)O(3-delta) and BaZr(0.1)Ce(0.7)Ln(0.2)O(3-delta) ceramics, as well as their sintering behaviour, were investigated. The results show that the Ce content in the BaZr(0.8)Ln(0.2)O(3-delta), BaZr(0.5)Ce(0.3)Ln(0.2)O(3-delta) and BaZr(0.1)Ce(0.7)Ln(0.2)O(3-delta) compounds influences the sintering temperature significantly, and a larger Ce content will lead to a lower sintering temperature. In addition, ionic radii of the dopants that are similar to the ionic radii of the B-site will also result in a lowered sintering temperature. Based on the present study, NiO has no influence on the lattice parameters.
|
|
| 38. |
|
|
| 39. |
- Bu, Junfu, et al.
(författare)
-
Yttrium doped hafnium oxide Hf0.69Y0.31O2-δ used for solid oxide fuel cell electrolytes and electronic materials
-
Annan publikation (övrigt vetenskapligt/konstnärligt)abstract
- An Yttrium doped hafnium oxide Hf0.69Y0.31O2-δ (YSH orYDH) is obtained by a modified solid state reactionmethod, where freeze drying is implemented to reduce theagglomeration. Refinement result shows that YSH is influorite cubic crystal with lattice parameter a = b = c =5.140674 Å (Figure 1). Based on this, the ionic radius ofY3+ in YSH for 8 coordination is 0.1006 nm, confirms theprevious prediction that it should be smaller than 0.1015nm. The YSH ceramic material with relative density of>97.5% can be obtained by conventional sintering at 1650℃ for 10hrs. Its conductivity is only 3.65×10-5 s cm-1 at700 ℃ (Figure 2), which is too low for solid oxide fuelcell application. However, its high dielectric constant22.03 (Figure 3a, average value, which is 1.4 times largerthan the pure Hafnia) and low dielectric loss over a widefrequency range and DC potential make it very promisingfor the microelectronic device application.
|
|
| 40. |
- Carlsson, Leo S., et al.
(författare)
-
Fibers of Failure : Classifying Errors in Predictive Processes
- 2020
-
Ingår i: Algorithms. - : MDPI. - 1999-4893. ; 13:6
-
Tidskriftsartikel (refereegranskat)abstract
- Predictive models are used in many different fields of science and engineering and are always prone to make faulty predictions. These faulty predictions can be more or less malignant depending on the model application. We describe fibers of failure (FIFA), a method to classify failure modes of predictive processes. Our method uses MAPPER, an algorithm from topological data analysis (TDA), to build a graphical model of input data stratified by prediction errors. We demonstrate two ways to use the failure mode groupings: either to produce a correction layer that adjusts predictions by similarity to the failure modes; or to inspect members of the failure modes to illustrate and investigate what characterizes each failure mode. We demonstrate FIFA on two scenarios: a convolutional neural network (CNN) predicting MNIST images with added noise, and an artificial neural network (ANN) predicting the electrical energy consumption of an electric arc furnace (EAF). The correction layer on the CNN model improved its prediction accuracy significantly while the inspection of failure modes for the EAF model provided guiding insights into the domain-specific reasons behind several high-error regions.
|
|
| 41. |
- Carlsson, Leo S., et al.
(författare)
-
Modeling the Effect of Scrap on the Electrical Energy Consumption of an Electric Arc Furnace
- 2020
-
Ingår i: Processes. - : MDPI. - 2227-9717. ; 8:9
-
Tidskriftsartikel (refereegranskat)abstract
- The melting time of scrap is a factor that affects the Electrical Energy (EE) consumption of the Electric Arc Furnace (EAF) process. The EE consumption itself stands for most of the total energy consumption during the process. Three distinct representations of scrap, based partly on the apparent density and shape of scrap, were created to investigate the effect of scrap on the accuracy of a statistical model predicting the EE consumption of an EAF. Shapley Additive Explanations (SHAP) was used as a tool to investigate the effects by each scrap category on each prediction of a selected model. The scrap representation based on the shape of scrap consistently resulted in the best performing models while all models using any of the scrap representations performed better than the ones without any scrap representation. These results were consistent for all four distinct and separately used cleaning strategies on the data set governing the models. In addition, some of the main scrap categories contributed to the model prediction of EE in accordance with the expectations and experience of the plant engineers. The results provide significant evidence that a well-chosen scrap categorization is important to improve a statistical model predicting the EE and that experience on the specific EAF under study is essential to evaluate the practical usefulness of the model.
|
|
| 42. |
- Carlsson, Leo, et al.
(författare)
-
Using statistical modeling to predict the electrical energy consumption of an electric arc furnace producing stainless steel
- 2020
-
Ingår i: Metals. - : MDPI AG. - 2075-4701. ; 10:1
-
Tidskriftsartikel (refereegranskat)abstract
- The non-linearity of the Electric Arc Furnace (EAF) process and the correlative behavior between the process variables impose challenges that have to be considered if one aims to create a statistical model that is relevant and useful in practice. In this regard, both the statistical modeling framework and the statistical tools used in the modeling pipeline must be selected with the aim of handling these challenges. To achieve this, a non-linear statistical modeling framework known as Artificial Neural Networks (ANN) has been used to predict the Electrical Energy (EE) consumption of an EAF producing stainless steel. The statistical tools Feature Importance (FI), Distance Correlation (dCor) and Kolmogorov–Smirnov (KS) tests are applied to investigate the most influencing input variables as well as reasons behind model performance differences when predicting the EE consumption on future heats. The performance, measured as kWh per heat, of the best model was comparable to the performance of the best model reported in the literature while requiring substantially fewer input variables.
|
|
| 43. |
- Chen, Chao, 1989-, et al.
(författare)
-
Mathematical modelling of molten alloy mixing in a continuous casting tundish - A hydrodynamic study
- 2015
-
Ingår i: Proceedings of the 6th International Congress on the Science and Technology of Steelmaking, ICS 2015. - : Chinese Society for Metals. ; , s. 407-411
-
Konferensbidrag (refereegranskat)abstract
- The emergence of the nozzle clogging have inspired steelmakers to optimize the alloying routine from alloying in ladle to alloying in tundish or in continuous casting mould. Meanwhile, wire injection in tundish has been shown to be successful for postalloying and tundish temperature adjustment. However, there is limited information on the continuous feeding of alloy in tundishes. There are three aspects to be considered: a) "alloy melting", b) "alloy particle dispersion" and c) "liquid alloy mixing". In the present paper, the "liquid alloy mixing" process is studied using CFD (Computational Fluid Dynamics) from a hydrodynamic perspective. In the simulation, the molten alloy is described by the density coupled mixed composition fluid model, which has been verified and validated by water modelling experiments using black ink and KCl tracer mixing in water as a priori. In the present model, the density of the liquid alloy is assumed to be 1.15 or 0.85 times of that of the liquid steel. Thereafter, the denser alloy injection at two positions has been studied, i.e. near the inlet (L1) and at the centre of the tundish (L2). The results indicate that the breakthrough time for the mass fraction of alloy at the outlet are about 100s for both locations. The difference is when the alloy was injected at the center (L2), there is a bypassing flow above the dam. As a result, the mass fraction of alloy at the outlet increases rapidly but the homogeneity in the tundish bath is reduced. Moreover, the denser alloy injection with different velocities was studied. The result shows that the mixing is slightly enhanced during the initial injection stage for the big velocity case. Besides, a test simulation on the mixing of a lighter alloy indicates that the alloy is floating to the top surface.
|
|
| 44. |
- Dahlin, Anders, et al.
(författare)
-
A theoretical study of the effect of ladle-slag additions on the BOF process
-
Annan publikation (övrigt vetenskapligt/konstnärligt)abstract
- A Case study has been performed using the commercial Multi‐Phase equilibrium (MPE) software. The aim was to study the effect on the energy balance of an industrial BOF converter when recycling of ladle slag is made to the process. A reference simulation was made with typical process parameters of an industrial converter without the addition of ladle slag. The energy penalty of recycling ladle slag to the process was found to be 1728 MJ. Moreover, five different options to obtain an energy balance in the converter were studied. The results showed that either the scrap weight could be decreased by 1.5t, or the iron‐ore addition could be reduced with 380 kg. These two solutions offered consistent metallurgical performance in the process, but had drawbacks due to a decreased yield and an increased blowing time respectively. It was also found that the chemical energy released from the process could be increased, by oxidizing FeO or adding FeSi. However, this had negative effects on the process time as well as the steel quality. The most beneficial way for the BOF process to compensate for the energy loss is to reduce the tapping temperature with 12°C. This will also have positive effects on the phosphorus removal in the process. The results also showed that 200 kg per heat of burnt lime could be saved thanks to the recirculation of ladle slag. However, concluding remarks on the environmental and economical effect of the different options to compensate for the energy penalty needs to be assessed by a Life Cycle Analysis in the future to which this study can act as a useful guide.
|
|
| 45. |
- Dahlin, Anders
(författare)
-
Influence of Ladle-slag Additions on BOF-Process Parameters
- 2011
-
Licentiatavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The influence of ladle-slag additions on the BOF-process performance were investigated in plant trials. The aim of the study was to recycle ladle slag from secondary steelmaking to the LD-converter to save lime and improve the slag formation. More specifically, two plant trial campaigns covering in total 83 heats, whereof 47 with ladle-slag additions and 36 without ladle-slag additions, were performed. Slag and steel sampling of the process were performed at tapping as well as during blowing at 15, 35, and 65% of the total blowing time. During the first campaign, ladle slag was added through the chute and lime reductions were made manually to correct for the ladle-slag addition. In the second campaign, a development of the approach was made to suite a normal production practice. More specifically, the ladle slag was added through the weight-hopper system and implemented in the process-control system. In this way, the lime additions were reduced automatically by approximately 260 kg per heat. Moreover, the heat balance was compensated with a reduction in the iron-ore consumption. Additionally, the lance program was modified and the lance was lowered in the initial stages of the blow. On the positive side, it was found that no demerits in the metallurgical performance of the process occur when ladle slag is recycled to the BOF-process. Furthermore, only slight affections on the slag composition were found, mainly with respect to the Al2O3 and FeO-content. In addition, the ladle slag was shown to melt during the initial stages of the blow. This contributed to an increased slag weight both during the blow and at tapping. However, a negative effect on the blowing time was experienced during the trials. Although, this effect was more pronounced during the first campaign and could be reduced with a controlled heat balance during the second campaign.
|
|
| 46. |
- Dahlin, Anders, et al.
(författare)
-
Influence of ladle slag additions on BOF process performance
- 2012
-
Ingår i: Ironmaking & steelmaking. - 0301-9233 .- 1743-2812. ; 39:5, s. 378-385
-
Tidskriftsartikel (refereegranskat)abstract
- A plant trial has been performed, with recycling of ladle slag to the LD converter at SSAB EMEA, Lulea, Sweden. The effect of ladle slag addition on the slag and steel composition, together with the slag weight, was investigated with sampling both during the blow and at blow end. The addition of ladle slag resulted in an increase in slag weight between 1 and 2 t throughout the blow and an increase of 3 wt-% in the slag Al2O3 content. This indicated that the ladle slag melted during the initial stages of the blow and enhanced the early slag formation. Lime additions were reduced with 3.5 kg t(-1) liquid steel without drawbacks on the phosphorus or sulphur refining. Heats with added ladle slag had an increase in blowing time with similar to 4% and an increased tendency for slopping. However, this can be handled by different lance and addition programmes.
|
|
| 47. |
- Dahlin, Anders, et al.
(författare)
-
Influence of ladle slag additions on BOF process under production conditions
- 2012
-
Ingår i: Ironmaking & steelmaking. - 0301-9233 .- 1743-2812. ; 39:5, s. 318-326
-
Tidskriftsartikel (refereegranskat)abstract
- The influence of recycled ladle slag on the basic oxygen furnace (BOF) process under production conditions was investigated in plant trials. More specifically, 25 heats with ladle slag additions and 23 heats without ladle slag additions were studied. Both steel and slag samples were collected, from which the chemical compositions were determined. In addition, several process parameters were monitored. Overall, it was found that recirculation of ladle slag during normal production conditions works fine. On the positive side, it was seen that the steel quality concerning the phosphorus and sulphur contents of liquid steel has, in accordance with previous studies, not been affected by the ladle slag additions. Furthermore, no major differences in the slag composition occur when the recycling of ladle slag to BOF is performed. Finally, in comparison to previous studies, the increased tendency for slopping when adding ladle slag could be eliminated with a change in the lance schedule. However, on the negative side, it was seen that the addition of ladle slag leads to an increased blowing time due to lower iron ore additions. Moreover, the slag weight at tapping increased due to an increased weight of added slag formers.
|
|
| 48. |
- Doostmohammadi, Hamid, et al.
(författare)
-
A Comparison of a Two-Dimensional and a Three-Dimensional Method for Inclusion Determinations in Tool Steel
- 2010
-
Ingår i: STEEL RES INT. - : Wiley. - 1611-3683. ; 81:5, s. 398-406
-
Tidskriftsartikel (refereegranskat)abstract
- To produce clean commercial tool steel the non-metallic inclusions characteristics have to be known, since they influence the mechanical properties of steel. In this work, inclusion characteristics in steel samples from plant trials were studied. The samples were collected in the steel plant according the two following methods: (a) 2D investigations of inclusions by a cross sectional method and (b) 3D investigations of inclusions collected on a film filter after electrolytic extraction. More specifically, the chemical composition, morphology, number and size distribution of inclusions in tool steel samples taken from ladle during melt treatment were determined by both methods. In both methods SEM equipped with EDS was used for compositional analysis of inclusions. In addition, in the cross sectional method an automated detection program called 'INCAFeature' was used to collect more statistics of non-metallic inclusions. The composition of inclusions larger than 5 mu m was found to contain 49% CaO based on the results from both methods. However, for smaller inclusions it was found that the accuracy of the 2D method was less than that of the 3D method due to the influence of the metal matrix on the results. In addition, it was found that a critical inclusion size of 4 mu m could be defined for the 3D method, above which the standard deviation in composition determination was very low.
|
|
| 49. |
|
|
| 50. |
- Du, Hongying, et al.
(författare)
-
Assessment of Chip Breakability during Turning of Stainless Steels Based on Weight Distributions of Chips
- 2020
-
Ingår i: Metals. - : MDPI. - 2075-4701. ; 10:5
-
Tidskriftsartikel (refereegranskat)abstract
- Currently, the available evaluation methods for determining the chip breakability in the industry are mainly based on subjective visual assessment of the chip formation by an operator during machining or on chips that were collected after the tests. However, in many cases, these methods cannot give us accurate quantitative differences for evaluation of the chip breakability of similar steel grades and similar sets of machining parameters. Thus, more sensitive methods are required to obtain more detailed information. In this study, a new method for the objective assessment of chip breakability based on quantitative determination of the weight distribution of chips (WDC) was tested and applied during machining of stainless steels without Ca treatment (316L) and with Ca treatment (316L + Ca). The obtained results show great consistencies and the reliability of this method. By using the WDC method, significant quantitative differences were obtained by the evaluation of chips, which were collected during the machining process of these two similar grades of steel at various cutting parameters, while, visually, these chips look very similar. More specifically, it was found that the Ca treatment of steel can improve the chip breakability of 316L + Ca steel in 80% of cutting trials, since a fraction of small light chips (Type I) from this steel increased and a fraction of large heavy chips (Type III) decreased accordingly. Moreover, the WDCs that were obtained at different cutting parameters were determined and compared in this study. The obtained results can be used for the optimization of chip breakability of each steel at different cutting parameters. The positive effect of Ca treatment of stainless steel was discussed in this study based on consideration of the modification of different non-metallic inclusions and their effect on the chip breakability during machining.
|
|
