| 1. |
- Papaevangelou, T., et al.
(författare)
-
ESS nBLM : Beam loss monitors based on fast neutron detection
- 2018
-
Ingår i: HB2018 - Proceedings of the 61st ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams. - 9783954502028 ; , s. 404-409
-
Konferensbidrag (refereegranskat)abstract
- A new type of Beam Loss Monitor (BLM) system is being developed for use in the European Spallation Source (ESS) linac, primarily aiming to cover the low energy part (proton energies between 3-100 MeV). In this region of the linac, typical BLM detectors based on charged particle detection (i.e. Ionization Chambers) are not appropriate because the expected particle fields will be dominated by neutrons and photons. Another issue is the photon background due to the RF cavities, which is mainly due to field emission from the electrons from the cavity walls, resulting in bremsstrahlung photons. The idea for the ESS neutron sensitive BLM system (ESS nBLM) is to use Micromegas detectors specially designed to be sensitive to fast neutrons and insensitive to low energy photons (X and gammas). In addition, the detectors must be insensitive to thermal neutrons, because those neutrons may not be directly correlated to beam losses. The appropriate configuration of the Micromegas operating conditions will allow excellent timing, intrinsic photon background suppression and individual neutron counting, extending thus the dynamic range to very low particle fluxes.
|
|
| 2. |
- Valiente-Dobon, J. J., et al.
(författare)
-
Conceptual design of the AGATA 2 pi array at LNL
- 2023
-
Ingår i: Nuclear Instruments and Methods in Physics Research Section A. - : Elsevier BV. - 0168-9002 .- 1872-9576. ; 1049
-
Tidskriftsartikel (refereegranskat)abstract
- The Advanced GAmma Tracking Array (AGATA) has been installed at Laboratori Nazionali di Legnaro (LNL), Italy. In this installation, AGATA will consist, at the beginning, of 13 AGATA triple clusters (ATCs) with an angular coverage of 1n,and progressively the number of ATCs will increase up to a 2 pi angular coverage. This setup will exploit both stable and radioactive ion beams delivered by the Tandem-PIAVE-ALPI accelerator complex and the SPES facility. The new implementation of AGATA at LNL will be used in two different configurations, firstly one coupled to the PRISMA large-acceptance magnetic spectrometer and lately a second one at Zero Degrees, along the beam line. These two configurations will allow us to cover a broad physics program, using different reaction mechanisms, such as Coulomb excitation, fusion-evaporation, transfer and fission at energies close to the Coulomb barrier. These setups have been designed to be coupled with a large variety of complementary detectors such as charged particle detectors, neutron detectors, heavy-ion detectors, high-energy gamma-ray arrays, cryogenic and gasjet targets and the plunger device for lifetime measurements. We present in this paper the conceptual design, characteristics and performance figures of this implementation of AGATA at LNL.
|
|
| 3. |
- Tuske, O., et al.
(författare)
-
ESS emittance measurements at INFN Catania
- 2017
-
Ingår i: IPAC 2017 - Proceedings of the 8th International Particle Accelerator Conference. - 9783954501823 ; , s. 123-125
-
Konferensbidrag (refereegranskat)abstract
- Beam characteristics at low energy are an absolute necessity for an acceptable injection in the next stage of a linear accelerator, and are also necessary to reduce beam loss and radiation inside the machine. CEA is taking part of ESS linac construction, by designing Emittance Measurement Units (EMU) for the Low Energy Beam Transport (LEBT). The EMU are designed to qualify the proton beam produced by the INFN Catania ion source. The design corresponds to an Allison scanner, using entrance and exit slits, electrostatic plates and a faraday cup. The beam-stopper protects the device and can be removable to fit to beam power. It has been manufactured by the CEA/LITEN with copper tungsten HIP technique. This article report the first measurements on the ESS injector in CATANIA in one dimension.
|
|
| 4. |
- Clement, E., et al.
(författare)
-
Conceptual design of the AGATA 1 π array at GANIL
- 2017
-
Ingår i: Nuclear Instruments and Methods in Physics Research Section A. - : Elsevier BV. - 0168-9002 .- 1872-9576. ; 855, s. 1-12
-
Tidskriftsartikel (refereegranskat)abstract
- The Advanced GAmma Tracking Array (AGATA) has been installed at the GANIL facility, Caen-France. This setup exploits the stable and radioactive heavy-ions beams delivered by the cyclotron accelerator complex of GANIL. Additionally, it benefits from a large palette of ancillary detectors and spectrometers to address in-beam γ-ray spectroscopy of exotic nuclei. The set-up has been designed to couple AGATA with a magnetic spectrometer, charged-particle and neutron detectors, scintillators for the detection of high-energy γ rays and other devices such as a plunger to measure nuclear lifetimes. In this paper, the design and the mechanical characteristics of the set-up are described. Based on simulations, expected performances of the AGATA l π array are presented.
|
|
