| 1. |
- Frazier-Wood, Alexis C., et al.
(författare)
-
Genetic variants associated with subjective well-being, depressive symptoms, and neuroticism identified through genome-wide analyses
- 2016
-
Ingår i: Nature Genetics. - : Nature Research (part of Springer Nature). - 1061-4036 .- 1546-1718. ; 48, s. 624-
-
Tidskriftsartikel (refereegranskat)abstract
- Very few genetic variants have been associated with depression and neuroticism, likely because of limitations on sample size in previous studies. Subjective well-being, a phenotype that is genetically correlated with both of these traits, has not yet been studied with genome-wide data. We conducted genome-wide association studies of three phenotypes: subjective well-being (n = 298,420), depressive symptoms (n = 161,460), and neuroticism (n = 170,911). We identify 3 variants associated with subjective well-being, 2 variants associated with depressive symptoms, and 11 variants associated with neuroticism, including 2 inversion polymorphisms. The two loci associated with depressive symptoms replicate in an independent depression sample. Joint analyses that exploit the high genetic correlations between the phenotypes (vertical bar(p) over cap vertical bar approximate to 0.8) strengthen the overall credibility of the findings and allow us to identify additional variants. Across our phenotypes, loci regulating expression in central nervous system and adrenal or pancreas tissues are strongly enriched for association.
|
|
| 2. |
- Hassila Karlsson, Carl Johan, et al.
(författare)
-
Influence of carbon content on microstructure and mechanical properties of Inconel 718 processed with Powder Bed Fusion – Laser Beam
-
Annan publikation (övrigt vetenskapligt/konstnärligt)abstract
- Additive manufacturing of alloys belonging to the Inconel family is today a hot research topic. Given that these alloys were developed with casting and forging as the main manufacturing route, the possibilities of adjusting their composition to make them better suited for the additive manufacturing processes should be investigated. In this work we study two different versions of Alloy 718 with different carbon content; one having a normal carbon content and one having a very low carbon content. Test pieces from these alloys were produced using the Powder Bed Fusion – Laser Beam process. TEM and SEM with EDS/EBSD was used to study the resulting microstructures both in the as-built and after heat treatment. Mechanical properties were evaluated for samples printed in different build directions using tensile and impact testing. The achieved materials in the as-built condition were very similar to one another in both the microstructure and the displayed mechanical properties. After heat treatment, differences in the microstructures could be identified as secondary carbides were found to precipitate exclusively in the alloy with a normal carbon content. Additionally, the different carbon contents affected the number of annealing twins that formed in the respective alloys, where more twins formed in the alloy with a low carbon content. This was attributed to the alloy’s lower stacking-fault energy. As annealing twins facilitate the transformation of the anisotropic as-built grain structure, effectively making the materials more isotropic, only the low carbon content alloy showed isotropic material properties after heat treatment.
|
|
| 3. |
|
|
| 4. |
- Åberg-Bengtsson, Lisbeth, et al.
(författare)
-
När Agnes fick va solen så fattade man ju precis : Om illustrationer i undervisning av yngre elever
- 2014
-
Ingår i: Resultatdialog. - Stockholm : Vetenskapsrådet. - 9789173072472 ; , s. 246-254
-
Bokkapitel (övrigt vetenskapligt/konstnärligt)abstract
- Att göra adekvata tolkningar av bilder och modeller kan vara verkliga stötestenar för många barn. Särskilt besvärligt förefaller det vara att tolka bilder av processer och förlopp i tryckta läromedel. Även enk-lare bilder och vanliga symboler kan dock leda till icke avsedda tolkningar. Barnen i studien föreföll i många fall betrakta illustrationerna som enbart dekoration och förbigick dem ofta om de inte direkt uppmärksammades på dem. Å andra sidan kunde illustrationer också, särskilt sådana som visade på extremer av något slag, väcka förundran och intresse.
|
|
| 5. |
- Åsberg, Dennis, 1988-, et al.
(författare)
-
A quality control method enhancement concept : Continual improvement of regulatory approved QC methods
- 2016
-
Ingår i: Journal of Pharmaceutical and Biomedical Analysis. - : Elsevier. - 0731-7085 .- 1873-264X. ; 129, s. 273-281
-
Tidskriftsartikel (refereegranskat)abstract
- Quality Control methods (QC-methods) play an important role in the overall control strategy for drug manufacturing. However, efficient life-cycle management and continual improvement are hindered due to a variety of post-approval variation legislations across territories and a lack of harmonization of the requirements. As a result, many QC-methods fall behind the technical development. Developing the QC-method in accordance with the Quality by Design guidelines gives the possibility to do continual improvements inside the original Method Operable Design Region (MODR). However, often it is necessary to do changes outside the MODR, e.g. to incorporate new technology that was not available at the time the original method was development. Here, we present a method enhancement concept which allows minor adjustments, within the same measuring principle, outside the original MODR without interaction with regulatory agencies. The feasibility of the concept is illustrated by a case study of a QC-method based on HPLC, assumed to be developed before the introduction of UHPLC, where the switch from HPLC to UHPLC is necessary as a continual improvement strategy. The concept relies on the assumption that the System Suitability Test (SST) and failure modes are relevant for other conditions outside the MODR as well when the same measuring principle is used. It follows that it should be possible to move outside the MODR as long as the SST has passed. All minor modifications of the original, approved QC-method must be re-validated according to a template given in the original submission and a statistical equivalence should be shown between the original and modified QC-methods. To summarize, revalidation is handled within the pharmaceutical quality control system according to internal change control procedures, but without interaction with regulating agencies.
|
|
| 6. |
|
|
| 7. |
|
|
| 8. |
- Aguilar, Helena, et al.
(författare)
-
VAV3 mediates resistance to breast cancer endocrine therapy
- 2014
-
Ingår i: Breast Cancer Research. - : BioMed Central. - 1465-5411 .- 1465-542X. ; 16:3, s. R53-
-
Tidskriftsartikel (refereegranskat)abstract
- INTRODUCTION: Endocrine therapies targeting cell proliferation and survival mediated by estrogen receptor alpha (ERalpha) are among the most effective systemic treatments for ERalpha-positive breast cancer. However, most tumors initially responsive to these therapies acquire resistance through mechanisms that involve ERalpha transcriptional regulatory plasticity. Here, we identify VAV3 as a critical component in this process.METHODS: A cell-based chemical compound screen was carried out to identify therapeutic strategies against resistance to endocrine therapy. Binding to ERalpha was evaluated by molecular docking analyses, an agonist fluoligand assay, and short-hairpin (sh) RNA-mediated protein depletion. Microarray analyses were performed to identify altered gene expression. Western blot of signaling and proliferation markers and shRNA-mediated protein depletion in viability and clonogenic assays were performed to delineate the role of VAV3. Genetic variation in VAV3 was assessed for association with the response to tamoxifen. Immunohistochemical analyses of VAV3 were carried out to determine the association with therapy response and different tumor markers. An analysis of gene expression association with drug sensitivity was carried out to identify a potential therapeutic approach based on differential VAV3 expression.RESULTS: The compound YC-1 was found to comparatively reduce the viability of cell models of acquired resistance. This effect was probably not due to activation of its canonical target (soluble guanylyl cyclase) but instead a result of binding to ERalpha. VAV3 was selectively reduced upon exposure to YC-1 or ERalpha depletion and, accordingly, VAV3 depletion comparatively reduced the viability of cell models of acquired resistance. In the clinical scenario, germline variation in VAV3 was associated with response to tamoxifen in Japanese breast cancer patients (rs10494071 combined P value = 8.4 x 10-4). The allele association combined with gene expression analyses indicated that low VAV3 expression predicts better clinical outcome. Conversely, high nuclear VAV3 expression in tumor cells was associated with poorer endocrine therapy response. Based on VAV3 expression levels and the response to erlotinib in cancer cell lines, targeting EGFR signaling may be a promising therapeutic strategy.CONCLUSIONS: This study proposes VAV3 as a biomarker and rationale signaling target to prevent and/or overcome resistance to endocrine therapy in breast cancer.
|
|
| 9. |
|
|
| 10. |
|
|
| 11. |
- Ahmed, Istaq, 1972, et al.
(författare)
-
Location of deuteron sites in the proton conducting perovskite BaZr0.50In0.50O3-y
- 2008
-
Ingår i: Journal of Alloys and Compounds. - : Elsevier BV. - 0925-8388. ; 450:1-2, s. 103-110
-
Tidskriftsartikel (refereegranskat)abstract
- High-resolution neutron powder diffraction data have been collected on deuterated and dried samples of the perovskite BaZr0.5In0.5O2.75 at 5 K and room temperature, respectively. Inspection of Fourier nuclear density maps for the deuterated phase have allowed the deuteron position to be refined on a 12h (1/2, y, 0) crystallographic site, with y = 0.217(4) yielding a chemically reasonable O-D distance of 0.92(2) angstrom. Evidence for anisotropy of the deuteron position is also found consistent with a 24k crystallographic site (0.56, 0.21, 0) indicative of displacements of the ion towards neighbouring oxygen ions. The presence of static oxygen disorder in both the dried and deuterated samples is apparent from the structural analyses. Raman spectra confirm short range deviations from cubic symmetry for both dried and hydrated samples.
|
|
| 12. |
|
|
| 13. |
- Ahmed, Istaq, 1972, et al.
(författare)
-
Synthesis and structural characterization of perovskite type proton conducting BaZr1-xInxO3-delta (0.0 <= x <= 0.75)
- 2006
-
Ingår i: Solid State Ionics. - : Elsevier BV. - 0167-2738 .- 1872-7689. ; 177:17-18, s. 1395-1403
-
Tidskriftsartikel (refereegranskat)abstract
- Solid state sintering has been used to prepare the cubic perovskite structured compounds BaZr1-xInxO3-delta (0.0 <= x <= 0.75). Analysis of X-ray powder diffraction (XRPD) data reveals that the unit cell parameter, a, increases linearly with an increased Indium concentration. XRPD data was also used to demonstrate the completion of sample hydration, which was reached when the materials showed a set of single-phase Bragg-peaks. Dynamic thermogravimetric analysis (TGA) data showed that approx. 89% of the total number of available oxygen vacancies can be filled in BaZr1-xInxO3-delta for x=0.50, and that the maximum water uptake occurs below 300 degrees C. Rietveld analysis of the room temperature neutron powder diffraction (NPD) data confirmed the average cubic symmetry (space group Pm-3m), and an expansion of the unit cell parameter after the hydration reaction. The strong O-H stretch band, 2500-3500 cm(-1), in the infrared absorbance spectrum clearly manifests the presence of protons in the hydrated material. Proton conductivity of hydrated BaZr1-xInxO3-delta, x=0.75 was investigated during heating and cooling cycles under dry argon atmosphere. The total conductivity during the heating cycle was nearly two orders of magnitude greater than that of cooling cycle at 300 degrees C, whilst these values were similar at higher temperatures i.e. T > 600 degrees C.
|
|
| 14. |
- Akos, Dennis, et al.
(författare)
-
Receiver measured time in the VDL mode 4 system
- 2000
-
Ingår i: IEEE 2000 Position Location and Navigation Symposium. - Piscataway, NJ : IEEE Communications Society. - 0780358724 ; , s. 309-316
-
Konferensbidrag (refereegranskat)abstract
- This paper details an investigation into the receiver measured time (RMT) concept of VDL Mode 4, basically the ability to derive estimates of time from the transmission of the VDL Mode 4 signals themselves. The RMT concept is based on determining the accurate time of transmission by measuring the time of arrival (TOA) of a received signal. The reverse aspect, or that of user position, can also be computed in the same manner and all computed simulations hold for errors in position. If synchronized time is available, or can be derived, then the user position can be computed based on signals from known transmitter locations. A complete, end-to-end RMT simulation model for the Gaussian filtered frequency shift keying (GFSK) and differential 8-phase shift keying (D8PSK) modulation techniques has been developed in which various transmitters, channels and receiver models as well as an RMT measurement system have been included. The timing results, which are included, are described in terms of two-sigma errors as a function of signal-to-noise ratios (SNRs). The performance varies for the different receiver structures over the typical operation region and for a 1-bit differential GFSK detector the two-sigma error is as low as 0.40 microseconds, corresponding to a ranging error of approximately 120 meters. When incorporating co-channel interference (CCI), multipath and Doppler frequency shifts the RMT performance has been shown to decrease in terms of higher two-sigma errors
|
|
| 15. |
- Borko, Domen, et al.
(författare)
-
The potential of citric acid and glucose enhancing the reaction of wood with bicine and tricine
- 2024
-
Ingår i: Wood Material Science & Engineering. - : Taylor & Francis. - 1748-0272 .- 1748-0280.
-
Tidskriftsartikel (refereegranskat)abstract
- To improve the resistance of wood to biological decay the Maillard reaction between introduced amines and wood cell-wall polymers can be utilised. However, initial studies in wood modification showed almost complete leaching of bicine and tricine from treated wood and the loss of beneficial effects. The objective of this study was to assess whether possible reactions of bicine or tricine with wood could be further enhanced and reaction products stabilised through the addition of glucose and/or citric acid. Thus, Scots pine sapwood specimens were impregnated with tricine or bicine, with or without glucose and citric acid, and then heated to a temperature of 160°C. The dimensional stability, degree of chemical leaching and mechanical properties were assessed. Overall, it was concluded that neither the presence of glucose nor citric acid did appear to enhance the reactivity of tricine or bicine. Anti-swelling efficiency (ASE) of 50% was observed for combined treatments of bicine/tricine and citric acid but the leaching resistance originated mainly from citric acid and glucose, with no indication for the retention of bicine or tricine. The presence of citric acid led to a strongly reduced modulus of rupture.
|
|
| 16. |
- Casillas Trujillo, Luis, et al.
(författare)
-
Experimental and theoretical evidence of charge transfer in multi-component alloys : how chemical interactions reduce atomic size mismatch
- 2021
-
Ingår i: Materials Chemistry Frontiers. - : Royal Society of Chemistry. - 2052-1537. ; 5:15, s. 5746-5759
-
Tidskriftsartikel (refereegranskat)abstract
- Ab initio simulations of a multi-component alloy using density functional theory (DFT) were combined with experiments on thin films of the same material using X-ray photoelectron spectroscopy (XPS) to study the connection between the electronic and atomic structures of multi-component alloys. The DFT simulations were performed on an equimolar HfNbTiVZr multi-component alloy. Structure and charge transfer were evaluated using relaxed, non-relaxed, as well as elemental reference structures. The use of a fixed sphere size model allowed quantification of charge transfer, and separation into different contributions. The charge transfer was generally found to follow electronegativity trends and results in a reduced size mismatch between the elements, and thus causes a considerable reduction of the lattice distortions compared to a traditional assumption based on tabulated atomic radii. A calculation of the average deviation from the average radius (i.e. the so-called δ-parameter) based on the atomic Voronoi volumes gave a reduction of δ from ca. 6% (using the volumes in elemental reference phases) to ca. 2% (using the volumes in the relaxed multi-component alloy phase). The reliability of the theoretical results was confirmed by XPS measurements of a Hf22Nb19Ti18V19Zr21 thin film deposited by sputter deposition. The experimentally observed core level binding energy shifts (CLS), as well as peak broadening due to a range of chemical surroundings, for each element showed good agreement with the calculated DFT values. The single solid solution phase of the sample was confirmed by X-ray diffraction (XRD) and transmission electron microscopy (TEM) including energy dispersive spectroscopy (EDS) with nm-resolution. These observations show that the HfNbTiVZr solid solution phase is non-ideal, and that chemical bonding plays an important part in the structure formation, and presumably also in the properties. Our conclusions should be transferable to other multi-component alloy systems, as well as some other multi-component material systems, and open up interesting possibilities for the design of material properties via the electronic structure and controlled charge transfer between selected metallic elements in the materials.
|
|
| 17. |
- Chou, Chia-Ying, et al.
(författare)
-
Precipitation kinetics during post-heat treatment of a L-PBF processed SS446 ferritic stainless steel
-
Annan publikation (övrigt vetenskapligt/konstnärligt)abstract
- The microstructure response to post-heat treatments of SS446 ferritic stainless steel processed by laser powder bed fusion is investigated, with focus on the precipitation kinetics of Cr2N. Precipitation simulations are conducted using the precipitation module (TC-PRISMA) within the Thermo-Calc Software Package. The annealed microstructure is characterized by scanning electron microscopy and the results are used for model validation and calibration. The microstructure and hardness responses to post heat treatments is discussed in terms of optimal solid-solution strengthening in SS446 ferritic stainless steel alloys processed by laser-powder bed fusion.
|
|
| 18. |
|
|
| 19. |
- Chou, Chia-Ying, et al.
(författare)
-
Precipitation Kinetics During Post-heat Treatment of an Additively Manufactured Ferritic Stainless Steel
- 2022
-
Ingår i: Metallurgical and Materials Transactions. A. - : Springer Nature. - 1073-5623 .- 1543-1940. ; 53:8, s. 3073-3082
-
Tidskriftsartikel (refereegranskat)abstract
- The microstructure response of laser-powder bed fusion (L-PBF)-processed ferritic stainless steel (AISI 441) during post-heat treatments is studied in detail. Focus is on the precipitation kinetics of the Nb-rich phases: Laves (Fe2Nb) and the cubic carbo-nitride (NbC), as well as the grain structure evolution. The evolution of the precipitates is characterized using scanning and transmission electron microscopy (SEM and TEM) and the experimental results are used to calibrate precipitation kinetics simulations using the precipitation module (TC-PRISMA) within the Thermo-Calc Software package. The calculations reproduce the main trend for both the mean radii for the Laves phase and the NbC, and the amount of Laves phase, as a function of temperature. The calibrated model can be used to optimize the post-heat treatment of additively manufactured ferritic stainless steel components and offer a creator tool for process and structure linkages in an integrated computational materials engineering (ICME) framework for alloy and process development of additively manufactured ferritic steels.
|
|
| 20. |
|
|
| 21. |
- Diaz Cruz, Maria Araceli, et al.
(författare)
-
Cis-regulatory elements in conserved non-coding sequences of nuclear receptor genes indicate for crosstalk between endocrine systems
- 2021
-
Ingår i: Open Medicine (Poland). - : De Gruyter Open. - 2391-5463. ; 16:1, s. 640-650
-
Tidskriftsartikel (refereegranskat)abstract
- Nuclear receptors (NRs) are ligand-activated transcription factors that regulate gene expression when bound to specific DNA sequences. Crosstalk between steroid NR systems has been studied for understanding the development of hormone-driven cancers but not to an extent at a genetic level. This study aimed to investigate crosstalk between steroid NRs in conserved intron and exon sequences, with a focus on steroid NRs involved in prostate cancer etiology. For this purpose, we evaluated conserved intron and exon sequences among all 49 members of the NR Superfamily (NRS) and their relevance as regulatory sequences and NR-binding sequences. Sequence conservation was found to be higher in the first intron (35%), when compared with downstream introns. Seventy-nine percent of the conserved regions in the NRS contained putative transcription factor binding sites (TFBS) and a large fraction of these sequences contained splicing sites (SS). Analysis of transcription factors binding to putative intronic and exonic TFBS revealed that 5 and 16%, respectively, were NRs. The present study suggests crosstalk between steroid NRs, e.g., vitamin D, estrogen, progesterone, and retinoic acid endocrine systems, through cis-regulatory elements in conserved sequences of introns and exons. This investigation gives evidence for crosstalk between steroid hormones and contributes to novel targets for steroid NR regulation.
|
|
| 22. |
- Diaz Cruz, Maria Araceli, et al.
(författare)
-
Differential expression of protein disulfide-isomerase A3 isoforms, PDIA3 and PDIA3N, in human prostate cancer cell lines representing different stages of prostate cancer
- 2021
-
Ingår i: Molecular Biology Reports. - : Springer. - 0301-4851 .- 1573-4978. ; 48:3, s. 2429-2436
-
Tidskriftsartikel (refereegranskat)abstract
- Prostate cancer (PCa) is a highly heterogeneous and unpredictable progressive disease. Sensitivity of PCa cells to androgens play a central role in tumor aggressiveness but biomarkers with high sensitivity and specificity that follow the progression of the disease has not yet been verified. The vitamin D endocrine system and its receptors, the Vitamin D Receptor (VDR) and the Protein Disulfide-Isomerase A3 (PDIA3), are related to anti-tumoral effects as well as carcinogenesis and have therefore been suggested as potential candidates for the prevention and therapy of several cancer forms, including PCa. In this study, we evaluated the mRNA expression of VDR and PDIA3 involved in vitamin D signaling in cell lines representing different stages of PCa (PNT2, P4E6, LNCaP, DU145 and PC3). This study further aimed to evaluate vitamin D receptors and their isoforms as potential markers for clinical diagnosis of PCa. A novel transcript isoform of PDIA3 (PDIA3N) was identified and found to be expressed in all PCa cell lines analyzed. Androgen-independent cell lines showed a higher mRNA expression ratio between PDIA3N/PDIA3 contrary to androgen-dependent cell lines that showed a lower mRNA expression ratio between PDIA3N/PDIA3. The structure of PDIA3N differed from PDIA3. PDIA3N was found to be a N-truncated isoform of PDIA3 and differences in protein structure suggests an altered protein function i.e. cell location, thioredoxin activity and affinity for 1,25(OH)2D3. Collectively, PDIA3 transcript isoforms, the ratio between PDIA3N/PDIA3 and especially PDIA3N, are proposed as candidate markers for future studies with different stages of PCa progression.
|
|
| 23. |
- Dobrovetska, Oksana, et al.
(författare)
-
Electrocatalytic activity of Pd-Au nanoalloys during methanol oxidation reaction
- 2020
-
Ingår i: International journal of hydrogen energy. - : Elsevier BV. - 0360-3199 .- 1879-3487. ; 45:7, s. 4444-4456
-
Tidskriftsartikel (refereegranskat)abstract
- Methanol fuel cells are very promising power source due to its high efficiency and low emissions of pollutants but their commercialization is hindered by development of the effective catalysts. Bimetallic nanostructured catalysts have been used to increase the effectiveness of methanol electrooxidation. Their high electrocatalytic activity can be accounted largely by the difference in electronegativity of two metals (e.g. Pd and Au), that resulting in gradual Auδ+→Auδ– transition with the increase in Pd content. Therefore, gold-enriched bimetallic Pd-Aunano were recommended as catalysts for oxidation processes since they are characterized by the presence of Auδ+ on their surface. Deposition of Pd, Au and Pd–Au nanoparticles (~50–350 nm) were carried out in dimethyl sulfoxide by pulsed mode of electrolysis directly on electrode surface. Cyclic voltammetry was the main method to study catalytic properties of the modified electrode in the anode oxidation process of methanol. It was found that oxidation rate on the electrode surface modified by bimetallic Pd–Au nanoparticles is ~1.5 times higher as compared to that in the case of electrodes modified by Pd or Au monometallic nanoparticles individually. In order to find highly active, selective, and stable catalysts for methanol electrocatalytic oxidation reaction additional studies are needed to understand the role of electrode surface charge and local OH− ions concentration from alkali solution.
|
|
| 24. |
|
|
| 25. |
- Garskaite, Edita, et al.
(författare)
-
Surface hardness and flammability of Na2SiO3 and nano-TiO2 reinforced wood composites
- 2019
-
Ingår i: RSC Advances. - : Royal Society of Chemistry. - 2046-2069. ; 9:48, s. 27973-27986
-
Tidskriftsartikel (refereegranskat)abstract
- The objective of this study was to explore an effect of the combined inorganic materials on the wood hardness and flame-retardancy properties in a concept of sustainable material management. Herein, the reinforcement of Scots pine (Pinus sylvestris L.) sapwood with sodium silicate and TiO2 nanoparticles via vacuum-pressure technique is reported. Pyrolysis of modified wood was studied by TG-FTIR analysis; the results showed that maximum weight loss for the modified wood was obtained at 40–50 °C lower temperatures compared to the reference untreated wood. The Gram–Schmidt profiles and spectra extracted at maxima absorption from Gram–Schmidt plots indicated chemical changes in wood–inorganic composites. SEM/EDS analysis revealed the presence of Na–O–Si solid gel within the wood-cell lumen and showed that TiO2 was homogeneously distributed within the amorphous Na–O–Si glass-forming phase to form a thin surface coating. EDS mapping further revealed the higher diffusivity of sodium into the cell wall compared to the silicon compound. The presence of amorphous sodium silicate and nano-TiO2 was additionally confirmed by XRD analysis. FTIR spectra confirmed the chemical changes in Scots pine sapwood induced by alkalization. Brinell hardness test showed that the hardness of the modified wood increased with the highest value (44% increase in hardness) obtained for 10% Na2SiO3–nTiO2 modified wood. The results showed good correlation between TG and flammability test; limiting oxygen index (LOI) values for the wood–inorganic composites increased by 9–14% compared to the untreated wood.
|
|
| 26. |
|
|
| 27. |
|
|
| 28. |
- Karlsson, Dennis, 1991-
(författare)
-
Additive Manufacturing of Ferritic Materials : A Journey from Stainless Steels to High-Entropy Alloys
- 2021
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Design of new materials with complex geometries is an important part of new innovative solutions for technical applications. With the use of additive manufacturing (AM), the design possibilities are endless and geometries that are impossible to manufacture by conventional techniques are available. However, the number of alloys commercially available is limited and extensive research is needed to establish new materials with unique properties. An important group of materials is ferritic stainless steels which have a body centered cubic crystal structure. They are often used for their high strength, corrosion resistance or electrical properties at high temperatures. However, they are often less ductile than austenitic stainless steels and issues with cracking may arise during thermal cycling in the L-PBF process. In this thesis, two AM techniques, laser powder bed fusion (L-PBF) and binder jetting were used to produce components of two different ferritic stainless steels and of the AlCoCrFeNi high-entropy alloy (HEA). The main objective was to investigate the microstructural development, phase stabilities and mechanical properties in relation to conventional manufacturing routes. Furthermore, thermodynamic calculations were used to explain the phase stabilities and solidification. L-PBF enables manufacturing of the ferritic stainless steels SS441 and SS446 with excellent mechanical properties. It was shown that solid particles may form in the melt and act as heterogeneous nucleation points, resulting in effective grain refinement for SS441. Other secondary phases can form during the thermal cycling in the L-PBF process, enhancing the mechanical properties. An example is the formation of austenite in SS446. Furthermore, the formation of solid particles and segregated microstructure during solidification was predicted by thermodynamic calculations.The AlCoCrFeNi alloy could be produced with an intriguing hierarchical microstructure and excellent mechanical properties using binder jetting and post-treatments. The microstructure of the final component can also be controlled by pre-annealing of the feedstock powder. Thermodynamic calculations were used to design the phase composition of the alloy. A characteristic single-phase solid solution is only observed at very high temperatures close to the melting point. Hence, the AlCoCrFeNi alloy is not a thermodynamically true HEA, but is stabilized due to kinetic effects during manufacturing.
|
|
| 29. |
|
|
| 30. |
- Karlsson, Dennis, et al.
(författare)
-
Additive manufacturing of the ferritic stainless steel SS441
- 2020
-
Ingår i: Additive Manufacturing. - AMSTERDAM, NETHERLANDS : Elsevier BV. - 2214-8604 .- 2214-7810. ; 36
-
Tidskriftsartikel (refereegranskat)abstract
- In this study, the ferritic stainless steel SS441 was produced with excellent mechanical properties using laser powder bed fusion (L-PBF) compared to samples produced by conventional casting and hot-rolling. In addition, thermodynamic calculations were utilized to study the phase stability at elevated temperatures and to understand the solidification behavior. The hot-rolled sample showed a grain size up to several hundred mu m with additional precipitates of TiN and Nb(C,N). In contrast, the as-built L-PBF samples displayed a grain size in the mu m range. Spherical precipitates with a size of around 50 nm could be observed and were attributed to a corundum phase from the thermodynamic calculations. The printed material shows superior mechanical properties, with more than 30 times higher impact energy compared to the hot-rolled alloy (217 +/- 5 J vs. 7 +/- 0.5 J). Furthermore, the properties are anisotropic for the L-PBF produced alloy, with the highest tensile strength vertical to the build direction. The superior mechanical properties of the L-PBF produced sample can be attributed to a smaller grain size, giving a higher strength according to the Hall-Petch relationship. The anisotropy of the material can be eliminated by heat treatments at 900 degrees C followed by water quenching, but the absolute strength decreases slightly due to formation of intermetallic phases such as Nb(C,N) and the Fe2Nb Laves phase. The results clearly illustrates that L-PBF provides a promising manufacturing mute for enhanced strength of ferritic stainless steels.
|
|
| 31. |
- Karlsson, Dennis, et al.
(författare)
-
Binder jetting of the AlCoCrFeNi alloy
- 2019
-
Ingår i: Additive Manufacturing. - : Elsevier. - 2214-8604 .- 2214-7810. ; 27, s. 72-79
-
Tidskriftsartikel (refereegranskat)abstract
- High density components of an AlCoCrFeNi alloy, often described as a high-entropy alloy, were manufactured by binder jetting followed by sintering. Thermodynamic calculations using the CALPHAD approach show that the high-entropy alloy is only stable as a single phase in a narrow temperature range below the melting point. At all other temperatures, the alloy will form a mixture of phases, including a sigma phase, which can strongly influence the mechanical properties. The phase stabilities in built AlCoCrFeNi components were investigated by comparing the as-sintered samples with the post-sintering annealed samples at temperatures between 900 °C and 1300 °C. The as-sintered material shows a dominant B2/bcc structure with additional fcc phase in the grain boundaries and sigma phase precipitating in the grain interior. Annealing experiments between 1000 °C and 1100 °C inhibit the sigma phase and only a B2/bcc phase with a fcc phase is observed. Increasing the temperature further suppresses the fcc phase in favor for the B2/bcc phases. The mechanical properties are, as expected, dependent on the annealing temperature, with the higher annealing temperature giving an increase in yield strength from 1203 MPa to 1461 MPa and fracture strength from 1996 MPa to 2272 MPa. This can be explained by a hierarchical microstructure with nano-sized precipitates at higher annealing temperatures. The results enlighten the importance of microstructure control, which can be utilized in order to tune the mechanical properties of these alloys. Furthermore, an excellent oxidation resistance was observed with oxide layers with a thickness of less than 5 μm after 20 h annealing at 1200 °C, which would be of great importance for industrial applications.
|
|
| 32. |
- Karlsson, Dennis, et al.
(författare)
-
Elemental segregation in an AlCoCrFeNi high-entropy alloy : A comparison between selective laser melting and induction melting
- 2019
-
Ingår i: Journal of Alloys and Compounds. - : Elsevier BV. - 0925-8388 .- 1873-4669. ; 784, s. 195-203
-
Tidskriftsartikel (refereegranskat)abstract
- Additive manufacturing of a high-entropy alloy, AlCoCrFeNi, was studied with selective laser melting from gas atomized powder. A wide process parameter window in the SLM process was investigated but it was impossible to produce crack-free samples, attributed to stresses that originate during the building processes. The microstructure and elemental segregation in the SLM samples were compared with induction-melted AlCoCrFeNi. The induction-melted sample crystallizes in randomly oriented large grains (several hundred microns). Dendritic and inter-dendritic areas with slightly different chemical composition can be observed. Within these areas a spinodal decomposition occurs with a separation into FeCr- and NiAl-rich domains. Further spinodal decomposition within the FeCr-rich regions into Cr- and Fe-rich domains was observed by atom probe tomography.In contrast, the SLM-samples crystallizes in much smaller grains (less than 20 μm) with a dendrite-like substructure. These dendrite-like features exhibit distinct chemical fluctuations on the nm-scale. During annealing more pronounced chemical fluctuations and the formation of Cr-rich and Cr-poor regions can be observed. The difference in microstructure and spinodal decomposition between the induction-melted and SLM samples is attributed to the significantly higher cooling rate for SLM. This study shows that, by using different synthesis pathways, it is possible to modify the microstructure and segregation of element within alloys. This can be used to tune the materials properties, if the cracking behavior is handled e.g. by change of alloy composition to minimize phase transformations or use of a heating stage.
|
|
| 33. |
- Karlsson, Dennis, et al.
(författare)
-
Structure and Hydrogenation Properties of a HfNbTiVZr High-Entropy Alloy
- 2018
-
Ingår i: Inorganic Chemistry. - : AMER CHEMICAL SOC. - 0020-1669 .- 1520-510X. ; 57:4, s. 2103-2110
-
Tidskriftsartikel (refereegranskat)abstract
- A high-entropy alloy (HEA) of HfNbTiVZr was synthesized using an arc furnace followed by ball milling. The hydrogen absorption mechanism was studied by in situ X-ray diffraction at different temperatures and by in situ and ex situ neutron diffraction experiments. The body centered cubic (BCC) metal phase undergoes a phase transformation to a body centered tetragonal (BCT) hydride phase with hydrogen occupying both tetrahedral and octahedral interstitial sites in the structure. Hydrogen cycling of the alloy at 500 degrees C is stable. The large lattice strain in the HEA seems favorable for absorption in both octahedral and tetrahedral sites. HEAs therefore have potential as hydrogen storage materials because of favorable absorption in all interstitial sites within the structure.
|
|
| 34. |
- Karlsson, Dennis, et al.
(författare)
-
Structure and phase transformations in gas atomized AlCoCrFeNi high entropy alloy powders
- 2022
-
Ingår i: Journal of Alloys and Compounds. - : Elsevier BV. - 0925-8388 .- 1873-4669. ; 893
-
Tidskriftsartikel (refereegranskat)abstract
- In this study, the crystal structure and phase stability of gas atomized equiatomic AlCoCrFeNi powder was investigated. This alloy is usually described as a high entropy alloy forming a solid solution phase stabilized by a high mixing entropy. However, thermodynamic calculations show that the high entropy phase is stable only at very high temperatures close to the melting point and that a mixture of several phases are the most stable state at lower temperatures. This suggest that kinetic effects may influence the phase composition of atomized powder. The unique features of X-ray diffraction, neutron diffraction as well as transmission electron microscopy were used to study the atomic structure of the atomized powder in detail. The results show that the powder crystallises in an ordered B2 (CsCl-type) structure with a preferred site occupation of Al and Fe on the (1/2 1/2 1/2) position and Co and Ni on the (0 0 0) position. During heat-treatment of the powder, the B2 phase decomposes into fcc and sigma phases and the final phase composition is highly dependent on the heating rate. The effect of heat-treatment on the atomized powder was also investigated and revealed a significant phase transformation with e.g. the formation of sigma phase preferably at the surface of the powder particles. The phase content was also dependent on the size fraction of the powder particles. Sintering of green bodies made with different heat cycles showed that the phase composition of the starting material had a significant impact on the final phase composition and microstructure of the sintered components. The results illustrate the importance of well-defined powder materials for powder consolidation, especially additive manufacturing (binder jetting) of high entropy alloys.
|
|
| 35. |
- Karlsson, Elin, et al.
(författare)
-
The mTOR effectors 4EBP1 and S6K2 are frequently coexpressed, and associated with a poor prognosis and endocrine resistance in breast cancer : a retrospective study including patients from the randomised Stockholm tamoxifen trials.
- 2013
-
Ingår i: Breast Cancer Research. - : BioMed Central. - 1465-5411 .- 1465-542X. ; 15:5, s. R96-
-
Tidskriftsartikel (refereegranskat)abstract
- INTRODUCTION: mTOR and its downstream effectors the 4E-binding protein 1 (4EBP1) and the p70 ribosomal S6 kinases (S6K1 and S6K2) are frequently upregulated in breast cancer, and assumed to be driving forces in tumourigenesis, in close connection with oestrogen receptor (ER) networks. Here, we investigated these factors as clinical markers in five different cohorts of breast cancer patients.METHODS: The prognostic significance of 4EBP1, S6K1 and S6K2 mRNA expression was assessed with real-time PCR in 93 tumours from the treatment randomised Stockholm trials, encompassing postmenopausal patients enrolled between 1976 and 1990. Three publicly available breast cancer cohorts were used to confirm the results. Furthermore, the predictive values of 4EBP1 and p4EBP1_S65 protein expression for both prognosis and endocrine treatment benefit were assessed by immunohistochemical analysis of 912 node-negative breast cancers from the Stockholm trials.RESULTS: S6K2 and 4EBP1 mRNA expression levels showed significant correlation and were associated with a poor outcome in all cohorts investigated. 4EBP1 protein was confirmed as an independent prognostic factor, especially in progesterone receptor (PgR)-expressing cancers. 4EBP1 protein expression was also associated with a poor response to endocrine treatment in the ER/PgR positive group. Cross-talk to genomic as well as non-genomic ER/PgR signalling may be involved and the results further support a combination of ER and mTOR signalling targeted therapies.CONCLUSION: This study suggests S6K2 and 4EBP1 as important factors for breast tumourigenesis, interplaying with hormone receptor signalling. We propose S6K2 and 4EBP1 as new potential clinical markers for prognosis and endocrine therapy response in breast cancer.
|
|
| 36. |
- Karlsson, Hannes, et al.
(författare)
-
Deep-learning-based denoising for photon-counting CT : Image domain or projection domain?
- 2022
-
Ingår i: MEDICAL IMAGING 2022. - : SPIE-Intl Soc Optical Eng.
-
Konferensbidrag (refereegranskat)abstract
- Photon-counting detectors (PCD) are the most recent advancement in computed tomography (CT). PCDs allow, among other things, for material decomposition, which decomposes the imaged object into a set of basis materials. Another field that is gaining attention, is the use of deep learning to improve the image reconstruction process in CT. In this work, we study the use of deep learning, specifically convolutional neural networks trained on the KiTS19 Challenge kidney data set, to improve the image quality of basis images resulting from three-material decomposition, a problem that is difficult due to its high sensitivity to noise. Our objective is to compare different network architectures and investigate whether these are best implemented in the projection domain or in the image domain. We study three different network architectures: U-Net, Dilated U-Net and ResNet, each applied in either the image domain or in the projection domain. The resulting image quality is evaluated in terms of contrast-to-noise ratio, task transfer function and noise power spectrum. Results show that for the type of phantoms the networks were trained on, the most effective option is to implement the network in the image domain and to use either the U-Net or Dilated U-Net architectures. However, when applying the networks to other phantoms, it seems that the networks in the sinogram generalize better, and produce better results. We also discuss why this might be the case, compare it with previous research, and consider what further improvements can be made.
|
|
| 37. |
|
|
| 38. |
- Karlsson, Maths, et al.
(författare)
-
Quasielastic neutron scattering of hydrated BaZr(0.90)A(0.10)O(2.95) (A = Y and Sc)
- 2009
-
Ingår i: Solid State Ionics. - : Elsevier BV. - 0167-2738. ; 180:1, s. 22-28
-
Tidskriftsartikel (refereegranskat)abstract
- Proton motions in hydrated proton conducting perovskites BaZr(0.90)A(0.10)O(2.95) (A = Y and Sc) have been investigated using quasielastic neutron scattering. The results reveal a localized motion on the ps time scale and with an activation energy of similar to 10-30 meV, in both materials. The temperature dependence of the total mean square displacement of the protons shows an onset of this motion at a temperature of about 300 K. The low activation energy, much lower than the activation energy for the macroscopic proton conductivity, suggests that this motion is not the rate-limiting process for the long-range proton diffusion, i.e. it is not linked to the two materials significantly different proton conductivities. In fact, a comparison of the QENS results with density functional theory calculations indicates that for both materials the observed motion may be ascribed to intra-octahedral proton transfers occurring close to a dopant atom. (C) 2008 Elsevier B.V. All rights reserved.
|
|
| 39. |
- Karlsson, Maths, 1978, et al.
(författare)
-
Quasielastic neutron scattering of hydrated BaZr0.90A0.10O2.95 (A = Y and Sc)
- 2009
-
Ingår i: Solid State Ionics. - : Elsevier BV. - 0167-2738. ; 180:1, s. 22-28
-
Tidskriftsartikel (refereegranskat)abstract
- Proton motions in hydrated proton conducting perovskites BaZr 0.90 A 0.10 O 2.95 (A = Y and Sc) have been investigated using quasielastic neutron scattering. The results reveal a localized motion on the ps time scale and with an activation energy of ~ 10-30 meV, in both materials. The temperature dependence of the total mean square displacement of the protons shows an onset of this motion at a temperature of about 300 K. The low activation energy, much lower than the activation energy for the macroscopic proton conductivity, suggests that this motion is not the rate-limiting process for the long-range proton diffusion, i.e. it is not linked to the two materials significantly different proton conductivities. In fact, a comparison of the QENS results with density functional theory calculations indicates that for both materials the observed motion may be ascribed to intra-octahedral proton transfers occurring close to a dopant atom. © 2008 Elsevier B.V. All rights reserved.
|
|
| 40. |
- Karlsson, Maths, 1978, et al.
(författare)
-
Using Neutron Spin-Echo To Investigate Proton Dynamics in Proton-Conducting Perovskites
- 2010
-
Ingår i: Chemistry of Materials. - : American Chemical Society (ACS). - 1520-5002 .- 0897-4756. ; 22:3, s. 740-742
-
Tidskriftsartikel (refereegranskat)abstract
- The applicability and potential of neutron spin-echo (NSE) to study proton dynamics in proton-conducting ceramics was studied. The experiment was performed on hydrated BaZr 0,90 Y 0.10 O 2.95 (10Y:BZO), a cubic perovskite with a relatively high proton conductivity. The NSE experiment was performed at the IN15 spectrometer at Institut Laue-Langevin (ILL) in Grenoble, France. The relaxation rate for two Q-values for the temperature 563 K was determined. The first-principles calculations were carried out within the framework of density functional theory (DFT). The calculated diffusion harriers far from Y-dopants are found to he 0.20 and 0.18 eV for the proton transfer and hydroxyl rotation motion, respectively. The binding energy to a Y-dopant is 0.16 eV, and the influence of the Y-dopant on the energetics for the proton is quite extended in space, including both the first and the second coordination shells.
|
|
| 41. |
- Karlsson, Maths, 1978, et al.
(författare)
-
Vibrational Properties of Protons in Hydrated BaInxZr1-xO3-x/2
- 2005
-
Ingår i: Physical Review B - Condensed Matter and Materials Physics. - 2469-9950 .- 2469-9969. ; 72, s. 1-7
-
Tidskriftsartikel (refereegranskat)abstract
- We investigate the local proton dynamics in the proton conducting hydrated perovskite system BaInxZr1-xO3-x/2 (x=0.25-0.75) using infrared spectroscopy and first-principles calculations. We show that oxygen vacancies and dopant atoms in the vicinity of the proton tilt the proton toward a neighboring oxygen creating strongly hydrogen-bonded configurations. This is manifested as a strong redshift of the O-H stretch band in the infrared absorption spectrum. We also find considerable fluctuations of the nearest and next-nearest oxygen-proton distances with time, resulting in additional spectral broadening. By comparing the frequencies of computed O-H stretch modes we can relate specific local configurations to different parts of the broad O-H stretch band. Even though hydrogen-bonded configurations favor proton transfer they hinder the long-range migration by decreasing the reorientational rate. Thus, in order to optimize the proton mobility it is important to avoid extreme configurations caused by either oxygen vacancies or dopant atoms in the perovskite structure.
|
|
| 42. |
- Karlsson, Olov, et al.
(författare)
-
Phenol-formaldehyde-resin treatment of Scots pine sapwood for the reduction of resin exudation through coatings
- 2022
-
Ingår i: Wood Material Science & Engineering. - : Taylor & Francis. - 1748-0272 .- 1748-0280. ; 17:2, s. 144-146
-
Tidskriftsartikel (refereegranskat)abstract
- Brown discolouration caused by resin exudation from knots is a problem for a range of light-coloured painted pines, and will negatively affect the appearance of the finish. To solve this problem, a hot-and-cold bath impregnation process of wood prior to painting was tested. Sawn timber, 18 × 120 mm in cross-section dimension, were heated in an oven and then immediately immersed in a cold liquid containing a phenol-formaldehyde-based solution, filling a 1–5 mm thick layer beneath the surface with phenol-formaldehyde. After curing, the timbers were painted with a white coloured coating system intended for exterior use, and tested in artificial weathering test (QUV). The phenol-formaldehyde treatment greatly reduced the discolouration of the coating compared to non-impregnated wood.
|
|
| 43. |
- Karlsson, Olov, et al.
(författare)
-
Phosphorylation of Kraft lignin to be used as a water-stable fire retardant in wood
- 2022
-
Ingår i: Proceedings of the 10th European Conference on Wood Modification. - Nancy : University of Lorraine, Faculty of Science and Technology, Laboratory of Study and Research on the Wood Material (LERMaB). ; , s. 374-377
-
Konferensbidrag (refereegranskat)abstract
- Conditions for phosphorylation of softwood kraft lignin was studied. Heating lignin at 150°C with ammonium dihydrogen phosphate water solution in the presence of urea gave a phosphor content in the worked-up product of ca. 2%. The intumescent behaviour during heating could also add to the fire stability of a potential product. In order to use lignin that has been treated with phosphoric acid as fire retardant in wood, acid removal or neutralisation is needed to obtain a final sustainable product. Water washing of phosphoric acid treated lignin led, however, to significant mass losses and a material that under suitable phosphorylation conditions (low temperature and shorter periods) could be efficiently solubilised in alkaline water.
|
|
| 44. |
- Karlsson, Olov, et al.
(författare)
-
Thermally modified wood treated with methacrylate
- 2018
-
Ingår i: Proceedings IRG Annual Meeting IRG49 Scientific Conference on Wood Protection Sandton, Johannesburg, South Africa 29 April-3 May.
-
Konferensbidrag (refereegranskat)abstract
- Thermally modified timber (TMT)from Scots pine sapwood similar to Thermo-D quality was impregnated with methacrylate resin by the hot-and-cold method and subsequently cured at elevated temperatures. The results showedthat methacrylate resin could be used to reduce colouring of painted TMT wood during accelerated weathering probably by hindering the migration of extractives. The resin itself did not reduce greying of the unpainted wood. Hardness was only slightly improved by treatment with the resin probably due to a higher density of the material. Formation of blisters occurred but wasreduced by treatment with the resin. Resistance to mould growth by a mixture of Aureobasidium pullulans, Cladosporium cladosporioides, Aspergillus versicolor, Penicillium purpurogenumwas performed by applying EN-15457:2014. Treatment with methacrylic resin hindered the colonisation of the three last mouldfungi.
|
|
| 45. |
- Karlsson, Rasmus, et al.
(författare)
-
Advanced Technology Paths to Intergenerational Justice
- 2010
-
Ingår i: Managing Environmental Justice. - 9789042029378 ; , s. 39-47
-
Bokkapitel (övrigt vetenskapligt/konstnärligt)abstract
- Traditionally, the green narrative has rejected “big science” in favour of small-scale solutions, local knowledge, and the development of “soft” or “intermediate” technologies. In a similar vein, concern for future generations is often used to propose dramatic reductions in energy- and material flows, as well as the adoption of a more frugal lifestyle thought to be “sustainable”. Contrary to this paradigmatic viewpoint, I argue that not only would such green visions be inherently unsustainable but the transition phase would in itself require enormous sacrifices and most likely lead to the violation of basic human rights. Instead, by assessing our own historical situation through the ethical lens of hypothetical contractualism, it is suggested that the interest of future generations is best served by rapid global political integration and an aggressive research agenda aimed at achieving climate stability through the innovation of new energy sources (such as nuclear fusion). It is further argued that we presently are living through a unique “window of opportunity” in which idealism and technological optimism are both urgently needed.
|
|
| 46. |
- Karlsson, Sandra, et al.
(författare)
-
Inhibition of CYP27B1 and CYP24 Increases the Anti-proliferative Effects of 25-Hydroxyvitamin D 3 in LNCaP Cells
- 2021
-
Ingår i: Anticancer Research. - : Anticancer Research USA Inc.. - 0250-7005 .- 1791-7530. ; 41:10, s. 4733-4740
-
Tidskriftsartikel (refereegranskat)abstract
- Background/Aim: Growing evidence suggests that vitamin D3 exerts anticancer effects. The present study aimed to evaluate 25-hydroxyvitamin D3(25(OH)D3) as a potential endocrine factor regulating proliferation and vitamin D receptor expression in LNCaP prostate cancer cells. Materials and Methods: Cell counting after treatment was utilized to assess the effect of 25(OH)D3on cell proliferation. Changes in mRNA expression of the vitamin D receptors, VDR and PDIA3, were evaluated using droplet digital polymerase chain reaction (ddPCR). Results: 25(OH)D3inhibited cell proliferation in a dose- and time-dependent manner. The inhibitory effect of 25(OH)D3on cell proliferation was potentiated after inhibition of CYP17B1 and CYP24 by genistein, preventing further metabolism of 25(OH)D3to 1,25-dihydroxyvitamin D3(1,25(OH)2D3) and 24,25-dihydroxyvitamin D3(24,25(OH)2D3). Expression of PDIA3 and VDR mRNA increased after treatment with 25(OH)D3, whereas the ratio between PDIA3 and VDR mRNA remained unchanged. Conclusion: 25(OH)D3has a direct inhibitory effect on cell proliferation, which is enhanced and accelerated when the metabolism of 25(OH)D3to 1,25(OH)2D3and 24,25(OH)2D3was inhibited by the CYP17B1 and CYP24 inhibitor genistein. Furthermore, treatment with 25(OH)D3increased receptor transcript expression, suggesting an increased VDR stability and sensibility of the treated cells.
|
|
| 47. |
- Karlsson, Sandra, et al.
(författare)
-
Molecular diagnostic markers in endometrial carcinoma : an overview
- 2013
-
Ingår i: Journal of Oncopathology. - : Optimal Clinical Ltd.. - 2052-5931. ; 1:2, s. 145-150
-
Tidskriftsartikel (refereegranskat)abstract
- Endometrial, ovarian, and cervical cancers are three of the most common malignancies of the female reproductive organs and the most common cause of gynecological cancer deaths in the Western world. Approximately 80% or more of endometrial cancers are low-grade, estrogen-dependent, endometrioid adenocarcinoma (type I), whereas 20% are high-grade endometrial carcinomas (type II) associated with poor prognosis. Although endometrial cancer is usually diagnosed at an early stage, still almost 20% of the patients present with advanced disease. Thus, there is a need for highly sensitive markers that can distinguish between high- and low-risk endometrial carcinoma. To date, however, there are no validated molecular markers for endometrial cancer. Recent genomic and proteomic-based anaes show great promise for the discovery of new and more useful biomarkers. In this review, we will discuss the currently reported biomarkers that hold potential as diagnostic tools for endometrial cancer.
|
|
| 48. |
- Karlsson, Sandra, et al.
(författare)
-
Vitamin D and prostate cancer : The role of membrane initiated signaling pathways in prostate cancer progression
- 2010
-
Ingår i: Journal of Steroid Biochemistry and Molecular Biology. - : Elsevier. - 0960-0760 .- 1879-1220. ; 121:1-2, s. 413-416
-
Tidskriftsartikel (refereegranskat)abstract
- 1,25-Dihydroxyvitamin D3 (1,25(OH)2D3) has been demonstrated to mediate both genomic and non-genomic responses in prostate cancer (CaP) cells. Here, we give an overview of membrane initiated 1,25(OH)2D3 signaling in prostate cancer cell progression. The presence of PDIA3 was investigated and homologous modeling of the putative PDIA3 receptor complex was conducted. Furthermore, the cellular distribution of nVDR was analyzed. We could show that both nVDR and PDIA3 are expressed in the prostate cancer cell lines investigated. The homologous modeling of PDIA3 showed that the receptor complex exists in a trimer formation, which suggests for allosteric activity. Our findings support previous reports and suggest that 1,25(OH)2D3 is an important therapeutic agent in inhibiting prostate cancer progression. Furthermore, our data show that 1,25(OH)2D3 regulate prostate cell biology via multiple pathways and targeting specific pathways for 1,25(OH)2D3 might provide more effective therapies compared to the vitamin D therapies currently clinically tested.
|
|
| 49. |
|
|
| 50. |
- Khalili, Bita, et al.
(författare)
-
Associations between common genetic variants and income provide insights about the socioeconomic health gradient
- 2024
-
Annan publikation (övrigt vetenskapligt/konstnärligt)abstract
- We conducted a genome-wide association study (GWAS) on income among individuals of European descent and leveraged the results to investigate the socio-economic health gradient (N=668,288). We found 162 genomic loci associated with a common genetic factor underlying various income measures, all with small effect sizes. Our GWAS-derived polygenic index captures 1 - 4% of income variance, with only one-fourth attributed to direct genetic effects. A phenome-wide association study using this polygenic index showed reduced risks for a broad spectrum of diseases, including hypertension, obesity, type 2 diabetes, coronary atherosclerosis, depression, asthma, and back pain. The income factor showed a substantial genetic correlation (0.92, s.e. = .006) with educational attainment (EA). Accounting for EA's genetic overlap with income revealed that the remaining genetic signal for higher income related to better mental health but reduced physical health benefits and increased participation in risky behaviours such as drinking and smoking.
|
|
