| 1. |
- Ferraz, Natalia, 1976-, et al.
(författare)
-
Nanoporosity of alumina surfaces induces different patterns of activation in adhering monocytes/macrophages
- 2010
-
Ingår i: International Journal of Biomaterials. - : Hindawi Limited. - 1687-8787 .- 1687-8795. ; 2010, s. 402715-
-
Tidskriftsartikel (refereegranskat)abstract
- The present study shows that alumina nanotopography affects monocyte/macrophage behaviour. Human mononuclear cells cultured on alumina membranes with pore diameters of 20 and 200 nm were evaluated in terms of cell adhesion, viability, morphology and release of pro-inflammatory cytokines. After 24 hours, cell adhesion was assessed by means of light microscopy and cell viability by measuring LDH release. The inflammatory response was evaluated by quantifying interleukin-1ß and tumour necrosis factor-α. Finally, scanning electron microscopy was used to study cell morphology. Results showed pronounced differences in cell number, morphology and cytokine release depending on the nanoporosity. Few but highly activated cells were found on the 200 nm porous alumina, while relatively larger number of cells was found on the 20 nm porous surface. However, despite their larger number, the cells adhering on the 20 nm surface exhibited reduced pro-inflammatory activity. It can be speculated that the difference in surface topography may lead to distinct protein adsorption patterns and therefore to different degree of cell activation. The data of this paper emphasize the role played by the material nanotexture in dictating cell responses and implies that nanotopography could be exploited for controlling the inflammatory response to implants.
|
|
| 2. |
- Ferraz, Natalia, 1976-, et al.
(författare)
-
Procoagulant behavior and platelet microparticle generation on nanoporous alumina
- 2010
-
Ingår i: Journal of biomaterials applications. - : SAGE. - 0885-3282 .- 1530-8022. ; 24:8, s. 675-692
-
Tidskriftsartikel (refereegranskat)abstract
- In the present work, we have investigated platelet microparticle(PMP) generation in whole blood after contact with nanoporous alumina.Alumina membranes with pore sizes of 20 and 200nm in diameter were incubated with whole blood and the number of PMP in the fluid phase was determined by flow cytometry. The role of the complement system in PMP generation was investigated using an analog of the potent complement inhibitor compstatin. Moreover, the procoagulant activity of the two pore size membranes were compared by measuring thrombin formation. Results indicated that PMP were not present in the fluid phase after whole blood contact with either of the alumina membranes. However, scanning electron microscope micrographs clearly showed the presence of PMP clusters on the 200nm pore size alumina, while PMP were practically absent on the 20nm membrane. We probed no influence of complement activation in PMP generation and adhesion and we hypothesize that other specific material-related protein–platelet interactions are taking place. A clear difference in procoagulant activity between the membranes could also be seen, 20nm alumina showed 100% higher procoagulant activity than 200nm membrane. By combining surface evaluation and flow cytometry analyses of the fluid phase, we are able to conclude that 200nm pore size alumina promotes PMP generation and adhesion while the 20nm membrane does not appreciably cause any release or adhesion of PMP, thus indicating a direct connection between PMP generation and nanoporosity.
|
|
| 3. |
- Ferraz, Natalia, 1976-, et al.
(författare)
-
Time sequence of blood activation by nanoporous alumina : Studies on platelets and complement system
- 2010
-
Ingår i: Microscopy research and technique (Print). - : Wiley-Liss Inc.. - 1059-910X .- 1097-0029. ; 73:12, s. 1101-1109
-
Tidskriftsartikel (refereegranskat)abstract
- In the present work the time sequence of blood activation by alumina membranes with different porosities (20 and 200 nm in diameter) was studied. The membranes were incubated with whole blood from 2 min to 4 h. Platelet adhesion and activation in addition to complement activation were monitored at different time points. Evaluation of platelet adhesion and activation was done by determining the change in platelet number and the levels of thrombospondin-1 in the fluid phase. Scanning electron microscopy studies were done to further evaluate platelet adhesion and morphology. Immunocytochemical staining was used to evaluate the presence of CD41 and CD62P antigens on the material surface. Complement activation was monitored by measuring C3a and sC5b-9 in plasma samples by means of enzyme immunoassays. Both alumina membranes displayed similar complement activation time profiles, with levels of C3a and sC5b-9 increasing with incubation time. A statistically significant difference between the membranes was found after 60 min of incubation. Platelet activation characteristics and time profile were different between the two membranes. Platelet adhesion increased over time for the 20 nm surface, while the clusters of microparticles on the 200 nm surface did not appreciably change during the course of the experiment. The release of thrombospondin-1 increased with time for both membranes, however much later for the 200 nm alumina (240 min) as compared to the 20 nm membrane (60 min). The surface topography of the alumina most probably influence protein transition rate, which in turn affects material-platelet activation kinetics.
|
|
| 4. |
- Janson, Oscar, et al.
(författare)
-
Titanium surface modification to enhance antibacterial and bioactive properties while retaining biocompatibility
- 2019
-
Ingår i: Materials science & engineering. C, biomimetic materials, sensors and systems. - : Elsevier BV. - 0928-4931 .- 1873-0191. ; 96, s. 272-279
-
Tidskriftsartikel (refereegranskat)abstract
- Bacterial infections associated with metal implants are severe problems affecting a considerable amount of people with dental or orthopedic implants. This study aims to examine the antibacterial effect of a Titanium-peroxy gel layer on the modified surface of commercially pure titanium grade 2. Variations in a multi-step surface modification procedure were tested to determine the best combination that provided an antibacterial effect while enhancing bioactivity without compromising biocompatibility. Soaking the surfaces in 30 wt% hydrogen peroxide held at 80 °C provided antibacterial activity while subsequent surface treatments in concentrated sodium and calcium hydroxide solutions were preformed to enhance bioactivity. Staphylococcus epidermidis was used to determine the antibacterial effect through both direct contact and biofilm inhibition tests while human dermal fibroblast cells and MC3T3 pre osteoblast cells were utilized to test biocompatibility. The greatest antibacterial effect was observed with only hydrogen peroxide treatment, but the resulting surface was neither bioactive nor biocompatible. It was found that subsequent surface treatments with sodium hydroxide followed by calcium hydroxide provided a bioactive surface that was also biocompatible. Additionally, a final treatment with autoclaving showed positive effects with regards to enhanced bioactivity. This multi-step surface modification procedure offers a promising, non-antibiotic, solution for combatting infections associated with biomedical implants.
|
|
| 5. |
- Pujari-Palmer, Shiuli, et al.
(författare)
-
Incorporation and delivery of an organoselenium antioxidant from a brushite cement
- 2017
-
Ingår i: Materials letters (General ed.). - : Elsevier BV. - 0167-577X .- 1873-4979. ; 197, s. 115-119
-
Tidskriftsartikel (refereegranskat)abstract
- An inflammatory reaction occurs following biomaterial implantation in the body, which produce toxic byproducts such as reactive oxygen species (ROS). Although ROS is required to clear the wound, excessive ROS can damage the tissue around the implant site, eventually leading to implant failure. One approach to control the inflammatory response is to incorporate an antioxidant into the biomaterial in order to scavenge ROS produced by activated phagocytes. In the present study, an organoselenium antioxidative compound was incorporated into a brushite cement, with the goal of scavenging ROS generated from activated primary human mononuclear leukocytes (MNCs), in vitro. The effect of the antioxidant on the physical properties of brushite cement, and its release from the cement were investigated via compressive strength, setting time, phase composition, and UV spectroscopy analysis. The physical properties of brushite remained unchanged following incorporation of the antioxidant. The antioxidant was slowly released from the cement, following a non-Fickian transport mechanism, with approximately 60% of the loaded antioxidant released over five days. The released antioxidant was then tested for its ability to scavenge ROS released by MNCs using the luminol amplified chemiluminescence assay. The results show that antioxidative released at both early stages (24 h) and late stages (120 h) retained its scavenging capacity and effectively reduced ROS production. These results indicate that brushite cements loaded with organoselenium compounds can modulate ROS production after implantation and potentially modulate the inflammatory response to improve device integration.
|
|
| 6. |
- Pujari-Palmer, Shiuli, et al.
(författare)
-
The Influence of Hydroxyapatite Nanoparticle Morphology on Embryonic Development in a Zebrafish Exposure Model
- 2017
-
Ingår i: Nanomaterials. - : MDPI AG. - 2079-4991. ; 7:4
-
Tidskriftsartikel (refereegranskat)abstract
- Nanomaterials are used in many different industries such as cosmetics, food, clothing, and electronics. There is increasing concern that exposure to nanoparticles (NPs) during pregnancy can adversely affect fetal development. It is well known that the size, charge, and chemistry of a nanoparticle can modulate embryological development. The role that particle morphology plays on early development, however, is still widely unknown. The present study aims to investigate the effect of hydroxyapatite nanoparticle (HANP) morphology on embryological development in a zebrafish exposure model. Four distinct HANP morphologies (dots, long rods, sheets, and fibers) were fabricated and characterized. Zebrafish embryos were exposed to HANPs (0-100 mg/L), and viability and developmental deformities were evaluated for up to 5 days post-fertilization (dpf). Malformations such as pericardial edema and axial curvature were apparent in embryos as early as 1 dpf, following exposure to the dot and fiber particles, and developed in embryos by 3 dpf in the sheet and long rod particle groups. Minimal death was observed in response to dot, long rod, and sheet particles (<= 25%), while fiber particles induced overwhelming toxicity (<= 60%) after 1 dpf, and complete toxicity during all subsequent time points. Collectively, these results suggest that nanoparticle morphology can significantly impact embryological development and should be a required consideration when designing nanomaterials for commercial use.
|
|
