| 1. |
- Kauppinen, Christoffer, et al.
(author)
-
Atomic layer etching of gallium nitride (0001)
- 2017
-
In: Journal of Vacuum Science and Technology A. - : American Vacuum Society. - 0734-2101. ; 35:6
-
Journal article (peer-reviewed)abstract
- In this work, atomic layer etching (ALE) of thin film Ga-polar GaN(0001) is reported in detail using sequential surface modification by Cl2 adsorption and removal of the modified surface layer by low energy Ar plasma exposure in a standard reactive ion etching system. The feasibility and reproducibility of the process are demonstrated by patterning GaN(0001) films by the ALE process using photoresist as an etch mask. The demonstrated ALE is deemed to be useful for the fabrication of nanoscale structures and high electron mobility transistors and expected to be adoptable for ALE of other materials.
|
|
| 2. |
- Aitola, Kerttu, et al.
(author)
-
Carbon nanotube-based hybrid hole-transporting material and selective contact for high efficiency perovskite solar cells
- 2016
-
In: Energy & Environmental Science. - : Royal Society of Chemistry (RSC). - 1754-5692 .- 1754-5706. ; 9:2, s. 461-466
-
Journal article (peer-reviewed)abstract
- We demonstrate a high efficiency perovskite solar cell with a hybrid hole-transporting material-counter electrode based on a thin single-walled carbon nanotube (SWCNT) film and a drop-cast 2,2,7,-7-tetrakis(N, N-di-p-methoxyphenylamine)-9,90-spirobifluorene (Spiro-OMeTAD) hole-transporting material (HTM). The average efficiency of the solar cells was 13.6%, with the record cell yielding 15.5% efficiency. The efficiency of the reference solar cells with spin-coated Spiro-OMeTAD hole-transportingmaterials (HTMs) and an evaporated gold counter electrode was 17.7% (record 18.8%), that of the cells with only a SWCNT counter electrode (CE) without additional HTM was 9.1% (record 11%) and that of the cells with gold deposited directly on the perovskite layer was 5% (record 6.3%). Our results show that it is possible to manufacture high efficiency perovskite solar cells with thin film (thickness less than 1 mu m) completely carbon-based HTMCEs using industrially upscalable manufacturing methods, such as press-transferred CEs and drop-cast HTMs.
|
|
| 3. |
- Aitola, Kerttu, et al.
(author)
-
Carbon nanotube film replacing silver in high-efficiency solid-state dye solar cells employing polymer hole conductor
- 2015
-
In: Journal of Solid State Electrochemistry. - : Springer Science and Business Media LLC. - 1432-8488 .- 1433-0768. ; 19:10, s. 3139-3144
-
Journal article (peer-reviewed)abstract
- A semitransparent, flexible single-walled carbon nanotube (SWCNT) film was efficiently used in place of evaporated silver as the counter electrode of a poly(3,4-ethylenedioxythiophene) polymer-based solid-state dye solar cell (SSDSC): the solar-to-electrical energy conversion efficiency of the SWCNT-SSDSC was 4.8 % when it was 5.2 % for the Ag-SSDSC. The efficiency difference stemmed from a 0.1-V difference in the open-circuit voltage, whose reason was speculated to be related to the different recombination processes in the two types of SSDSCs.
|
|
| 4. |
- Aitola, Kerttu, et al.
(author)
-
High Temperature-Stable Perovskite Solar Cell Based on Low-Cost Carbon Nanotube Hole Contact
- 2017
-
In: Advanced Materials. - : Wiley-VCH Verlagsgesellschaft. - 0935-9648 .- 1521-4095. ; 29:17
-
Journal article (peer-reviewed)abstract
- Mixed ion perovskite solar cells (PSC) are manufactured with a metal-free hole contact based on press-transferred single-walled carbon nanotube (SWCNT) film infiltrated with 2,2,7,-7-tetrakis(N, N-di-p-methoxyphenylamine)-9,90-spirobifluorene (Spiro-OMeTAD). By means of maximum power point tracking, their stabilities are compared with those of standard PSCs employing spin-coated Spiro-OMeTAD and a thermally evaporated Au back contact, under full 1 sun illumination, at 60 degrees C, and in a N-2 atmosphere. During the 140 h experiment, the solar cells with the Au electrode experience a dramatic, irreversible efficiency loss, rendering them effectively nonoperational, whereas the SWCNT-contacted devices show only a small linear efficiency loss with an extrapolated lifetime of 580 h.
|
|
| 5. |
- Aitola, Kerttu, et al.
(author)
-
Highly catalytic carbon nanotube counter electrode on plastic for dye solar cells utilizing cobalt-based redox mediator
- 2013
-
In: Electrochimica Acta. - : Elsevier BV. - 0013-4686 .- 1873-3859. ; 111, s. 206-209
-
Journal article (peer-reviewed)abstract
- A flexible, slightly transparent and metal-free random network of single-walled carbon nanotubes (SWCNTs) on plain polyethylene terephthalate (PET) plastic substrate outperformed platinum on conductive glass and on plastic as the counter electrode (CE) of a dye solar cell employing a Co(II/III)tris(2,2'-bipyridyl) complex redox mediator in 3-methoxypropionitrile solvent. The CE charge-transfer resistance of the SWCNT film was 0.60 Omega cm(2), 4.0 Omega cm(2) for sputtered platinum on indium tin oxide-PET substrate and 1.7 Omega cm(2) for thermally deposited Pt on fluorine-doped tin oxide glass, respectively. The solar cell efficiencies were in the same range, thus proving that an entirely carbon-based SWCNT film on plastic is as good CE candidate for the Co electrolyte. (C) 2013 Elsevier Ltd. All rights reserved.
|
|
| 6. |
- Anoshkin, Ilya, et al.
(author)
-
Coronene Encapsulation in Single-Walled Carbon Nanotubes : Stacked Columns, Peapods, and Nanoribbons
- 2014
-
In: ChemPhysChem. - : Wiley. - 1439-4235 .- 1439-7641. ; 15:8, s. 1660-1665
-
Journal article (peer-reviewed)abstract
- Encapsulation of coronene inside single-walled carbon nanotubes (SWNTs) was studied under various conditions. Under high vacuum, two main types of molecular encapsulation were observed by using transmission electron microscopy: coronene dimers and molecular stacking columns perpendicular or tilted (45-608) with regard to the axis of the SWNTs. A relatively small number of short nanoribbons or polymerized coronene molecular chains were observed. However, experiments performed under an argon atmosphere (0.17 MPa) revealed reactions between the coronene molecules and the formation of hydrogen-terminated graphene nanoribbons. It was also observed that the morphology of the encapsulated products depend on the diameter of the SWNTs. The experimental results are explained by using density functional theory calculations through the energies of the coronene molecules inside the SWNTs, which depend on the orientation of the molecules and the diameter of the tubes.
|
|
| 7. |
- Chernov, Alexander I, et al.
(author)
-
Optical properties of graphene nanoribbons encapsulated in single-walled carbon nanotubes
- 2013
-
In: ACS Nano. - : American Chemical Society (ACS). - 1936-0851 .- 1936-086X. ; 7:7, s. 6346-6353
-
Journal article (peer-reviewed)abstract
- We report the photoluminescence (PL) from graphene nanoribbons (GNRs) encapsulated in single-walled carbon nanotubes (SWCNTs). New PL spectral features originating from GNRs have been detected in the visible spectral range. PL peaks from GNRs have resonant character, and their positions depend on the ribbon geometrical structure in accordance with the theoretical predictions. GNRs were synthesized using confined polymerization and fusion of coronene molecules. GNR@SWCNTs material demonstrates a bright photoluminescence both in infrared (IR) and visible regions. The photoluminescence excitation mapping in the near-IR spectral range has revealed the geometry-dependent shifts of the SWCNT peaks (up to 11 meV in excitation and emission) after the process of polymerization of coronene molecules inside the nanotubes. This behavior has been attributed to the strain of SWCNTs induced by insertion of the coronene molecules.
|
|
| 8. |
- Cwirzen, Andrzej, et al.
(author)
-
CHH Cement Composite
- 2009
-
In: Nanotechnology in Construction 3. - Berlin : Encyclopedia of Global Archaeology/Springer Verlag. - 9783642009792 - 9783642009808 ; , s. 181-185
-
Conference paper (peer-reviewed)abstract
- The compressive strength and electrical resistivity for hardened pastes produced from nanomodified Portland SR cement (CHH- Carbon Hedge Hog cement) were studied. The nanomodification included growing of carbon nanotubes (CNTs) and carbon nanofibers (CNFs) on the cement particles. Pastes having water to binder ratio of 0.5 were produced. The obtained hardened material was characterized by increased compressive strength in comparison with the reference specimens made from pristine SR cement, which was attributed to reinforcing action of the CNTs and CNFs. The electrical resistivity of CHH composite was lower by one order of magnitude in comparison with reference Portland cement paste
|
|
| 9. |
- Dhaka, Veer, et al.
(author)
-
Aluminum-Induced Photoluminescence Red Shifts in Core-Shell GaAs/AlxGa1-xAs Nanowires
- 2013
-
In: Nano letters (Print). - : American Chemical Society (ACS). - 1530-6984 .- 1530-6992. ; 13:8, s. 3581-3588
-
Journal article (peer-reviewed)abstract
- We report a new phenomenon related to Al-induced carrier confinement at the interface in core-shell GaAs/AlxGa1-xAs nanowires grown using metal-organic vapor phase epitaxy with Au as catalyst. All AlxGa1-xAs shells strongly passivated the GaAs nanowires, but surprisingly the peak photoluminescence (PL) position and the intensity from the core were found to be a strong function of Al composition in the shell at low temperatures. Large and systematic red shifts of up to similar to 66 nm and broadening in the PL emission from the GaAs core were observed when the Al composition in the shell exceeded 3%. On the contrary, the phenomenon was observed to be considerably weaker at the room temperature. Cross-sectional transmission electron microscopy reveals Al segregation in the shell along six Al-rich radial bands displaying a 3-fold symmetry. Time-resolved PL measurements suggest the presence of indirect electron-hole transitions at the interface at higher Al composition. We discuss all possibilities including a simple shell-core-shell model using simulations where the density of interface traps increases with the Al content, thus creating a strong local electron confinement. The carrier confinement at the interface is most likely related to Al inhomogeneity and/or Al-induced traps. Our results suggest that a low Al composition in the shell is desirable in order to achieve ideal passivation in GaAs nanowires.
|
|
| 10. |
- Dhaka, Veer, et al.
(author)
-
Protective capping and surface passivation of III-V nanowires by atomic layer deposition
- 2016
-
In: AIP Advances. - : American Institute of Physics (AIP). - 2158-3226. ; 6:1
-
Journal article (peer-reviewed)abstract
- Low temperature (similar to 200 degrees C) grown atomic layer deposition (ALD) films of AlN, TiN, Al2O3, GaN, and TiO2 were tested for protective capping and surface passivation of bottom-up grown III-V (GaAs and InP) nanowires (NWs), and top-down fabricated InP nanopillars. For as-grown GaAs NWs, only the AlN material passivated the GaAs surface as measured by photoluminescence (PL) at low temperatures (15K), and the best passivation was achieved with a few monolayer thick (2 angstrom) film. For InP NWs, the best passivation (similar to 2x enhancement in room-temperature PL) was achieved with a capping of 2nm thick Al2O3. All other ALD capping layers resulted in a de-passivation effect and possible damage to the InP surface. Top-down fabricated InP nanopillars show similar passivation effects as InP NWs. In particular, capping with a 2 nm thick Al2O3 layer increased the carrier decay time from 251 ps (as-etched nanopillars) to about 525 ps. Tests after six months ageing reveal that the capped nanostructures retain their optical properties. Overall, capping of GaAs and InP NWs with high-k dielectrics AlN and Al2O3 provides moderate surface passivation as well as long term protection from oxidation and environmental attack.
|
|
| 11. |
- Fedotov, Pavel V., et al.
(author)
-
Optical Study of Nanotube and Coronene Composites
- 2013
-
In: Journal of Nanoelectronics and Optoelectronics. - : American Scientific Publishers. - 1555-130X .- 1555-1318. ; 8:1, s. 16-22
-
Research review (peer-reviewed)abstract
- A novel nanomaterial, graphene nanoribbons encapsulated inside single-walled carbon nanotubes (GNR@SWNT), was studied by combined optical methods. This nanomaterial was found to have a bright photoluminescence both in IR and UV-Vis spectral ranges. Its spectral features have a complicated resonant structure different from the features of initial components: coronene molecules and SWNTs. The encapsulation ability appears to correlate strongly with the geometry of SWNTs. A weak interaction between nanotube walls and encapsulated species has been discovered: no evidence of charge or energy transfer has been registered.
|
|
| 12. |
- Gorkina, Alexandra L, et al.
(author)
-
Transparent and conductive hybrid graphene/carbon nanotube films
- 2016
-
In: Carbon. - : Elsevier. - 0008-6223 .- 1873-3891. ; 100, s. 501-507
-
Journal article (peer-reviewed)abstract
- Carbon nanomaterials (carbon nanotubes (CNTs) and graphene) are promising materials for optoelectronic applications, including flexible transparent and conductive films (TCFs) due to their extraordinary electrical, optical and mechanical properties. However, the performance of CNT- or graphene-only TCFs still needs to be improved. One way to enhance the optoelectrical properties of TCFs is to hybridize CNTs and graphene. This approach leads to creation of a novel material that exhibits better properties than its individual constituents. In this work, the novel hybrid CNT-graphene nanomaterial was fabricated by graphene oxide deposition on top of CNT films. The graphene oxide was then reduced by thermal annealing at ambient atmosphere or in H2 atmosphere. At the final step the CNT-graphene hybrids were chemically doped using gold(III) chloride. As a result, we show that the hybrids demonstrate excellent optoelectrical performance with the sheet resistance as low as 73 Ω/□ at 90% transmittance.
|
|
| 13. |
- Hedman, Daniel, 1989-
(author)
-
Single-Walled Carbon Nanotubes : A theoretical study of stability, growth and properties
- 2019
-
Doctoral thesis (other academic/artistic)abstract
- Since their discovery over 25 years ago, scientists have explored the remarkable properties of single-walled carbon nanotubes (SWCNTs) for use in high-tech materials and devices, such as strong light-weight composites, efficient electrical wires, supercapacitors and high-speed transistors. However, the mass production of such materials and devices is still limited by the capability of producing uniform high-quality SWCNTs. The properties of a SWCNT are determined by the orientation of the hexagonal grid of carbon atoms constituting the tube wall, this is known as the chirality of the SWCNT.Today's large-scale methods for producing SWCNTs, commonly known as growth, give products with a large spread of different chiralities. A mixture of chiralities give products with a mixture of different properties. This is one of the major obstacles preventing large-scale use of SWCNTs in future materials and devices. The goal is to achieve growth where the resulting product is uniform, meaning that all SWCNTs have the same chirality, a process termed chirality-specific growth. To achieve this requires a deep fundamental understanding of how SWCNTs grow, both from an experimental and a theoretical perspective.This work focuses on theoretical studies of SWCNTs and their growth mechanisms. With the goal of achieving a deeper understanding of how chirality arises during growth and how to control it. Thus, taking us ever closer to the ultimate goal of achieving chirality-specific growth. In this thesis, an introduction to the field is given and the current research questions are stated. Followed by chapters on carbon nanomaterials, SWCNTs and computational physics. A review of the state-of-the-art experimental and theoretical works relating to chirality specific growth is also given.The results presented in this thesis are obtained using first principle density functional theory calculations. Results show that the stability of short SWCNT-fragments can be linked to the products observed in experiments. In 84% of the investigate cases, the chirality of experimental products matches the chirality of the most stable SWCNT-fragments (within 0.2 eV). Further studies also reveal a previously unknown link between the stability of SWCNT-fragments and their length. Calculations show that at specific lengths the most stable chirality changes. Thus, introducing the concept of a switching length for SWCNT stabilities.This newly found property of SWCNTs is used in combination with previously published works to create a state-of-the-art analytical model to investigate growth of SWCNTs any temperature. Results from the model show that the most stable chirality obtained is dependent on the diameter, length of the SWCNT, the growth temperature and the composition of the catalyst. Finally, a detailed study on the ability of catalyst metals to sustain SWCNT growth points to Pt as an interesting candidate to achieve growth of rarely seen chiralities. The new knowledge gained from these results takes us even closer to achieving chirality-specific growth.
|
|
| 14. |
- Mudimela, Prasantha R., et al.
(author)
-
Synthesis of carbon nanotubes and nanofibers on silica and cement matrix materials
- 2009
-
In: Journal of Nanomaterials. - : Hindawi Limited. - 1687-4110 .- 1687-4129. ; 2009
-
Journal article (peer-reviewed)abstract
- In order to create strong composite materials, a good dispersion of carbon nanotubes (CNTs) and nanofibers (CNFs) in a matrix material must be obtained. We proposed a simple method of growing the desirable carbon nanomaterial directly on the surface of matrix particles. CNTs and CNFs were synthesised on the surface of model object, silica fume particles impregnated by iron salt, and directly on pristine cement particles, naturally containing iron oxide. Acetylene was successfully utilised as a carbon source in the temperature range from 550 to 750 °C. 5-10 walled CNTs with diameters of 10-15nm at 600 °C and 12-20nm at 750 °C were synthesised on silica particles. In case of cement particles, mainly CNFs with a diameter of around 30nm were grown. It was shown that high temperatures caused chemical and physical transformation of cement particles. © 2009 Prasantha R. Mudimela et al.
|
|
| 15. |
- Nasibulin, Albert G., et al.
(author)
-
A novel cement-based hybrid material
- 2009
-
In: New Journal of Physics. - : IOP Publishing. - 1367-2630. ; 11
-
Journal article (peer-reviewed)abstract
- Carbon nanotubes (CNTs) and carbon nanofibers (CNFs) are known to possess exceptional tensile strength, elastic modulus and electrical and thermal conductivity. They are promising candidates for the next-generation high-performance structural and multi-functional composite materials. However, one of the largest obstacles to creating strong, electrically or thermally conductive CNT/CNF composites is the difficulty of getting a good dispersion of the carbon nanomaterials in a matrix. Typically, time-consuming steps of purification and fimctionalization of the carbon nanomaterial are required. We propose a new approach to grow CNTs/CNFs directly on the surface of matrix particles. As the matrix we selected cement, the most important construction material. We synthesized in a simple one-step process a novel cement hybrid material (CHM), wherein CNTs and CNFs are attached to the cement particles. The CHM has been proven to increase 2 times the compressive strength and 40 times the electrical conductivity of the hardened paste, i.e. concrete without sand. © IOP Publishing Ltd and Deutsche Physikalische Gesellschaft.
|
|
| 16. |
- Nasibulina, Larisa I., et al.
(author)
-
Direct synthesis of carbon nanofibers on cement particles
- 2010
-
In: Transportation Research Record. - : SAGE Publications. - 0361-1981 .- 2169-4052. ; :2142, s. 96-101
-
Journal article (peer-reviewed)abstract
- Carbon nanotubes (CNTs) and nanofibers (CNFs) are promising candidates for the next generation of high-performance structural and multifunctional composite materials. One of the largest obstacles to creating strong, electrically or thermally conductive CNT-CNF composites is the difficulty of getting a good dispersion of the carbon nanomaterials in a matrix. Typically, time-consuming steps are required in purifying and functionalizing the carbon nanomaterial. A new approach under which CNTs-CNFs are grown directly on the surface of matrix and matrix precursor particles is proposed. Cement was selected as the precursor matrix, since it is the most important construction material. A novel cement hybrid material (CHM) was synthesized in which CNTs and CNFs are attached to the cement particles by two different methods: screw feeder and fluidized bed reactors. CHM has been proved to increase the compressive strength by two times and the electrical conductivity of the hardened paste by 40 times.
|
|
| 17. |
- Nasibulina, Larisa I., et al.
(author)
-
Effect of carbon nanotube aqueous dispersion quality on mechanical properties of cement composite
- 2012
-
In: Journal of Nanomaterials. - : Hindawi Limited. - 1687-4110 .- 1687-4129. ; 2012
-
Journal article (peer-reviewed)abstract
- An effect of the quality of carbon nanotube (CNT) dispersions added to cement on paste mechanical properties has been studied. High-quality dispersions of few-walled CNT (FWCNTs) were produced in two steps. First, FWCNTs were functionalized in a mixture of nitric and sulfuric acids (70wt. and 96wt., resp.) at 80°C. Second, functionalized FWCNTs were washed out by acetone to remove carboxylated carbonaceous fragments (CCFs) formed during CNT oxidation. Mechanical test results showed 2-fold increase in the compressive strength of the cement paste prepared from the dispersion of acetone-washed functionalized FWCNTs, which is believed to occur due to the chemical interaction between cement matrix and functional groups (-COOH and -OH). Utilisation of unwashed FWCNTs led to a marginal improvement of mechanical properties of the cement pastes, whereas surfactant-treated functionalized FWCNT dispersions only worsened the mechanical properties. Copyright © 2012 Larisa I. Nasibulina et al.
|
|
| 18. |
- Talyzin, Alexandr, 1969-, et al.
(author)
-
Hydrogenation, Purification, and Unzipping of Carbon Nanotubes by Reaction with Molecular Hydrogen : Road to Graphane Nanoribbons
- 2011
-
In: ACS Nano. - : American Chemical Society (ACS). - 1936-0851 .- 1936-086X. ; 5:6, s. 5132-5140
-
Journal article (peer-reviewed)abstract
- Reaction of single-walled carbon nanotubes (SWNTs) with hydrogen gas was studied in a temperature interval of 400-550 degrees C and at hydrogen pressure of 50 bar. Hydrogenation of nanotubes was observed for samples treated at 400-450 degrees C with about 1/3 of carbon atoms forming covalent C-H bonds, whereas hydrogen treatment at higher temperatures (550 degrees C) occurs as an etching. Unzipping of some SWNTs Into graphene nanoribbons is observed as a result of hydrogenation at 400-550 degrees C Annealing in hydrogen gas at elevated conditions for prolonged periods of time (72 h) is demonstrated to result also in nanotube opening, purification of nanotubes from amorphous carbon, and removal of carbon coatings from Fe catalyst particles, which allows their complete elimination by acid treatment.
|
|
| 19. |
- Talyzin, Alexandr, 1969-, et al.
(author)
-
Synthesis of Graphene Nanoribbons Encapsulated in Single-Walled Carbon Nanotubes
- 2011
-
In: Nano letters (Print). - : American Chemical Society (ACS). - 1530-6984 .- 1530-6992. ; 11:10, s. 4352-4356
-
Journal article (peer-reviewed)abstract
- A novel material, graphene nanoribbons encapsulated in single-walled carbon nanotubes (GNR@SWNT), was synthesized using confined polymerization and fusion of polycyclic aromatic hydrocarbon (PAH) molecules. Formation of the GNR is possible due to confinement effects provided by the one-dimensional space inside nanotubes, which helps to align coronene or perylene molecules edge to edge to achieve dimerization and oligomerization of the molecules into long nanoribbons. Almost 100% filling of SWNT with GNR is achieved while nanoribbon length is limited only by the length of the encapsulating nanotube. The PAH fusion reaction provides a very simple and easily scalable method to synthesize GNR@SWNT in macroscopic amounts. First-principle simulations indicate that encapsulation of the GNRs is energetically favorable and that the electronic structure of the encapsulated GNRs is the same as for the free-standing ones, pointing to possible applications of the GNR@SWNT structures in photonics and nanoelectronics.
|
|
| 20. |
|
|
| 21. |
- Zhang, Xiaoliang, et al.
(author)
-
Dry-Deposited Transparent Carbon Nanotube Film as Front Electrode in Colloidal Quantum Dot Solar Cells
- 2017
-
In: ChemSusChem. - : WILEY-V C H VERLAG GMBH. - 1864-5631 .- 1864-564X. ; 10:2, s. 434-441
-
Journal article (peer-reviewed)abstract
- Single-walled carbon nanotubes (SWCNTs) show great potential as an alternative material for front electrodes in photovoltaic applications, especially for flexible devices. In this work, a press-transferred transparent SWCNT film was utilized as front electrode for colloidal quantum dot solar cells (CQDSCs). The solar cells were fabricated on both glass and flexible substrates, and maximum power conversion efficiencies of 5.5 and 5.6 %, respectively, were achieved, which corresponds to 90 and 92% of an indium-doped tin oxide (ITO)-based device (6.1 %). The SWCNTs are therefore a very good alternative to the ITO-based electrodes especially for flexible solar cells. The optical electric field distribution and optical losses within the devices were simulated theoretically and the results agree with the experimental results. With the optical simulations that were performed it may also be possible to enhance the photovoltaic performance of SWCNT-based solar cells even further by optimizing the device configuration or by using additional optical active layers, thus reducing light reflection of the device and increasing light absorption in the quantum dot layer.
|
|
