| 1. |
- Liu, DJ, et al.
(författare)
-
Schizophrenia risk conferred by rare protein-truncating variants is conserved across diverse human populations
- 2023
-
Ingår i: Nature genetics. - : Springer Science and Business Media LLC. - 1546-1718 .- 1061-4036. ; 55:3, s. 369-
-
Tidskriftsartikel (refereegranskat)abstract
- Schizophrenia (SCZ) is a chronic mental illness and among the most debilitating conditions encountered in medical practice. A recent landmark SCZ study of the protein-coding regions of the genome identified a causal role for ten genes and a concentration of rare variant signals in evolutionarily constrained genes1. This recent study—and most other large-scale human genetics studies—was mainly composed of individuals of European (EUR) ancestry, and the generalizability of the findings in non-EUR populations remains unclear. To address this gap, we designed a custom sequencing panel of 161 genes selected based on the current knowledge of SCZ genetics and sequenced a new cohort of 11,580 SCZ cases and 10,555 controls of diverse ancestries. Replicating earlier work, we found that cases carried a significantly higher burden of rare protein-truncating variants (PTVs) among evolutionarily constrained genes (odds ratio = 1.48; P = 5.4 × 10−6). In meta-analyses with existing datasets totaling up to 35,828 cases and 107,877 controls, this excess burden was largely consistent across five ancestral populations. Two genes (SRRM2 and AKAP11) were newly implicated as SCZ risk genes, and one gene (PCLO) was identified as shared by individuals with SCZ and those with autism. Overall, our results lend robust support to the rare allelic spectrum of the genetic architecture of SCZ being conserved across diverse human populations.
|
|
| 2. |
- Lozano, Rafael, et al.
(författare)
-
Measuring progress from 1990 to 2017 and projecting attainment to 2030 of the health-related Sustainable Development Goals for 195 countries and territories: a systematic analysis for the Global Burden of Disease Study 2017
- 2018
-
Ingår i: The Lancet. - : Elsevier. - 1474-547X .- 0140-6736. ; 392:10159, s. 2091-2138
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Efforts to establish the 2015 baseline and monitor early implementation of the UN Sustainable Development Goals (SDGs) highlight both great potential for and threats to improving health by 2030. To fully deliver on the SDG aim of “leaving no one behind”, it is increasingly important to examine the health-related SDGs beyond national-level estimates. As part of the Global Burden of Diseases, Injuries, and Risk Factors Study 2017 (GBD 2017), we measured progress on 41 of 52 health-related SDG indicators and estimated the health-related SDG index for 195 countries and territories for the period 1990–2017, projected indicators to 2030, and analysed global attainment. Methods: We measured progress on 41 health-related SDG indicators from 1990 to 2017, an increase of four indicators since GBD 2016 (new indicators were health worker density, sexual violence by non-intimate partners, population census status, and prevalence of physical and sexual violence [reported separately]). We also improved the measurement of several previously reported indicators. We constructed national-level estimates and, for a subset of health-related SDGs, examined indicator-level differences by sex and Socio-demographic Index (SDI) quintile. We also did subnational assessments of performance for selected countries. To construct the health-related SDG index, we transformed the value for each indicator on a scale of 0–100, with 0 as the 2·5th percentile and 100 as the 97·5th percentile of 1000 draws calculated from 1990 to 2030, and took the geometric mean of the scaled indicators by target. To generate projections through 2030, we used a forecasting framework that drew estimates from the broader GBD study and used weighted averages of indicator-specific and country-specific annualised rates of change from 1990 to 2017 to inform future estimates. We assessed attainment of indicators with defined targets in two ways: first, using mean values projected for 2030, and then using the probability of attainment in 2030 calculated from 1000 draws. We also did a global attainment analysis of the feasibility of attaining SDG targets on the basis of past trends. Using 2015 global averages of indicators with defined SDG targets, we calculated the global annualised rates of change required from 2015 to 2030 to meet these targets, and then identified in what percentiles the required global annualised rates of change fell in the distribution of country-level rates of change from 1990 to 2015. We took the mean of these global percentile values across indicators and applied the past rate of change at this mean global percentile to all health-related SDG indicators, irrespective of target definition, to estimate the equivalent 2030 global average value and percentage change from 2015 to 2030 for each indicator. Findings: The global median health-related SDG index in 2017 was 59·4 (IQR 35·4–67·3), ranging from a low of 11·6 (95% uncertainty interval 9·6–14·0) to a high of 84·9 (83·1–86·7). SDG index values in countries assessed at the subnational level varied substantially, particularly in China and India, although scores in Japan and the UK were more homogeneous. Indicators also varied by SDI quintile and sex, with males having worse outcomes than females for non-communicable disease (NCD) mortality, alcohol use, and smoking, among others. Most countries were projected to have a higher health-related SDG index in 2030 than in 2017, while country-level probabilities of attainment by 2030 varied widely by indicator. Under-5 mortality, neonatal mortality, maternal mortality ratio, and malaria indicators had the most countries with at least 95% probability of target attainment. Other indicators, including NCD mortality and suicide mortality, had no countries projected to meet corresponding SDG targets on the basis of projected mean values for 2030 but showed some probability of attainment by 2030. For some indicators, including child malnutrition, several infectious diseases, and most violence measures, the annualised rates of change required to meet SDG targets far exceeded the pace of progress achieved by any country in the recent past. We found that applying the mean global annualised rate of change to indicators without defined targets would equate to about 19% and 22% reductions in global smoking and alcohol consumption, respectively; a 47% decline in adolescent birth rates; and a more than 85% increase in health worker density per 1000 population by 2030. Interpretation: The GBD study offers a unique, robust platform for monitoring the health-related SDGs across demographic and geographic dimensions. Our findings underscore the importance of increased collection and analysis of disaggregated data and highlight where more deliberate design or targeting of interventions could accelerate progress in attaining the SDGs. Current projections show that many health-related SDG indicators, NCDs, NCD-related risks, and violence-related indicators will require a concerted shift away from what might have driven past gains—curative interventions in the case of NCDs—towards multisectoral, prevention-oriented policy action and investments to achieve SDG aims. Notably, several targets, if they are to be met by 2030, demand a pace of progress that no country has achieved in the recent past. The future is fundamentally uncertain, and no model can fully predict what breakthroughs or events might alter the course of the SDGs. What is clear is that our actions—or inaction—today will ultimately dictate how close the world, collectively, can get to leaving no one behind by 2030.
|
|
| 3. |
- Mallhi, Tauqeer Hussain, et al.
(författare)
-
Mental Health and Coping Strategies among University Staff during the COVID-19 Pandemic : A Cross-Sectional Analysis from Saudi Arabia
- 2023
-
Ingår i: Sustainability. - : MDPI. - 2071-1050. ; 15:11
-
Tidskriftsartikel (refereegranskat)abstract
- This study examined psychological health and coping strategies among faculty and staff at a Saudi Arabian university. A web-based self-administered survey was used to assess probable anxiety, depression, post-traumatic stress disorder (PTSD), and coping strategies by using the Generalized Anxiety Disorder-7 (GAD-7), Patient Health Questionnaire-9 (PHQ-9), Impact of Event Scale-Revised (IES-R), and Brief-COPE scale, respectively. Of 502 participants (mean age 36.04 +/- 10.32 years, male: 66.3%), 24.1% (GAD-7 >= 10) had probable anxiety. Anxiety score was significantly higher in females (p < 0.001), those with a history of COVID-19 infection (p = 0.036), and participants with less work experience (p = 0.019). Approximately 40% of participants met the criteria of probable depression, with females (p < 0.001) and participants with less experience having more depressive symptoms. Around one-fourth (27.7%) of study participants indicated probable PTSD (score +/- 33), with higher symptoms in females (p <0.001), less experienced staff (p < 0.00 1), and academic staff (p = 0.006). Correlation analysis indicated a significant positive correlation between anxiety and depression (r = 0.844, p < 0.001), anxiety and PTSD (r = 0.650, p < 0.001), and depression and PTSD (r = 0.676, p < 0.001). Active coping, religious/spiritual coping, and acceptance were common coping strategies, while substance use was the least adopted coping method among the study participants. This study indicated a high prevalence of probable psychological ailments among university staff.
|
|
| 4. |
- Aslam, Marryam, et al.
(författare)
-
Physical characteristics of CdZrO3 perovskite at different pressure for optoelectronic application
- 2020
-
Ingår i: Journal of Materials Research and Technology. - : Elsevier. - 2238-7854. ; 9:5, s. 9965-9971
-
Tidskriftsartikel (refereegranskat)abstract
- A comprehensive investigation of the physical characteristics of any material provides beneficial information regarding its application viewpoint in different industries. Herein, we report the tunable mechanical and optoelectronic properties of cubic CdZrO3 under variable pressure up to 80 GPa using density functional theory (DFT). The pressure-induced band gap engineering reveals a fantastic fact of transformation of the indirect to direct band gap with increasing pressure. The dielectric response disclosed that optical parameters dragged towards higher energy with an increase of pressure, which unveiled the potential of CdZrO3 for optoelectronic applications. Effective change in optoelectronic is attributed to indirect to direct band gap transition. This study provides a gateway to how the optoelectronic properties of cubic CdZrO3 could be tuned by employing external pressure.
|
|
| 5. |
|
|
| 6. |
- Khan, U. H., et al.
(författare)
-
A novel asterisk-shaped circularly polarized RFID tag for on-metal applications
- 2016
-
Ingår i: Applied Computational Electromagnetics Society Journal. - : Applied Computational Electromagnetics Society (ACES). - 1054-4887. ; 31:9, s. 1035-1042
-
Tidskriftsartikel (refereegranskat)abstract
- An asterisk-shaped, metal-mountable RFID tag with a minuscule footprint is presented. The proposed design makes use of multiple asymmetric slots patterned in a cross-shaped fashion to achieve circular polarization. The structure is excited capacitively using a terminally-grounded, T-shaped feed line positioned within the slots. This peculiar arrangement permits the attainment of circular polarized radiation characteristics over a wide band of operation. Impedance matching, antenna size reduction and read range enhancement are the additional advantages offered by the embedded feed line. The final design is realized on a commercially available FR-4 substrate over dimensions of 40 x 40 mm2 yielding an impedance bandwidth and an axial ratio bandwidth of 37 MHz and 20 MHz, respectively. Improvement in antenna gain (and consequently in the read range) is reported upon mounting the tag on metallic surfaces.
|
|
| 7. |
- Naghavi, Mohsen, et al.
(författare)
-
Global, regional, and national age-sex specific all-cause and cause-specific mortality for 240 causes of death, 1990-2013: a systematic analysis for the Global Burden of Disease Study 2013
- 2015
-
Ingår i: The Lancet. - 1474-547X .- 0140-6736. ; 385:9963, s. 117-171
-
Tidskriftsartikel (refereegranskat)abstract
- Background Up-to-date evidence on levels and trends for age-sex-specifi c all-cause and cause-specifi c mortality is essential for the formation of global, regional, and national health policies. In the Global Burden of Disease Study 2013 (GBD 2013) we estimated yearly deaths for 188 countries between 1990, and 2013. We used the results to assess whether there is epidemiological convergence across countries. Methods We estimated age-sex-specifi c all-cause mortality using the GBD 2010 methods with some refinements to improve accuracy applied to an updated database of vital registration, survey, and census data. We generally estimated cause of death as in the GBD 2010. Key improvements included the addition of more recent vital registration data for 72 countries, an updated verbal autopsy literature review, two new and detailed data systems for China, and more detail for Mexico, UK, Turkey, and Russia. We improved statistical models for garbage code redistribution. We used six different modelling strategies across the 240 causes; cause of death ensemble modelling (CODEm) was the dominant strategy for causes with sufficient information. Trends for Alzheimer's disease and other dementias were informed by meta-regression of prevalence studies. For pathogen-specifi c causes of diarrhoea and lower respiratory infections we used a counterfactual approach. We computed two measures of convergence (inequality) across countries: the average relative difference across all pairs of countries (Gini coefficient) and the average absolute difference across countries. To summarise broad findings, we used multiple decrement life-tables to decompose probabilities of death from birth to exact age 15 years, from exact age 15 years to exact age 50 years, and from exact age 50 years to exact age 75 years, and life expectancy at birth into major causes. For all quantities reported, we computed 95% uncertainty intervals (UIs). We constrained cause-specific fractions within each age-sex-country-year group to sum to all-cause mortality based on draws from the uncertainty distributions. Findings Global life expectancy for both sexes increased from 65.3 years (UI 65.0-65.6) in 1990, to 71.5 years (UI 71.0-71.9) in 2013, while the number of deaths increased from 47.5 million (UI 46.8-48.2) to 54.9 million (UI 53.6-56.3) over the same interval. Global progress masked variation by age and sex: for children, average absolute diff erences between countries decreased but relative diff erences increased. For women aged 25-39 years and older than 75 years and for men aged 20-49 years and 65 years and older, both absolute and relative diff erences increased. Decomposition of global and regional life expectancy showed the prominent role of reductions in age-standardised death rates for cardiovascular diseases and cancers in high-income regions, and reductions in child deaths from diarrhoea, lower respiratory infections, and neonatal causes in low-income regions. HIV/AIDS reduced life expectancy in southern sub-Saharan Africa. For most communicable causes of death both numbers of deaths and age-standardised death rates fell whereas for most non-communicable causes, demographic shifts have increased numbers of deaths but decreased age-standardised death rates. Global deaths from injury increased by 10.7%, from 4.3 million deaths in 1990 to 4.8 million in 2013; but age-standardised rates declined over the same period by 21%. For some causes of more than 100 000 deaths per year in 2013, age-standardised death rates increased between 1990 and 2013, including HIV/AIDS, pancreatic cancer, atrial fibrillation and flutter, drug use disorders, diabetes, chronic kidney disease, and sickle-cell anaemias. Diarrhoeal diseases, lower respiratory infections, neonatal causes, and malaria are still in the top five causes of death in children younger than 5 years. The most important pathogens are rotavirus for diarrhoea and pneumococcus for lower respiratory infections. Country-specific probabilities of death over three phases of life were substantially varied between and within regions. Interpretation For most countries, the general pattern of reductions in age-sex specifi c mortality has been associated with a progressive shift towards a larger share of the remaining deaths caused by non-communicable disease and injuries. Assessing epidemiological convergence across countries depends on whether an absolute or relative measure of inequality is used. Nevertheless, age-standardised death rates for seven substantial causes are increasing, suggesting the potential for reversals in some countries. Important gaps exist in the empirical data for cause of death estimates for some countries; for example, no national data for India are available for the past decade.
|
|
| 8. |
|
|
| 9. |
|
|
| 10. |
- Shah, Shahid, et al.
(författare)
-
Assessment of health-related quality of life among patients with obesity, hypertension and type 2 diabetes mellitus and its relationship with multimorbidity
- 2023
-
Ingår i: PLOS ONE. - : Public Library of Science (PLoS). - 1932-6203. ; 18:8
-
Tidskriftsartikel (refereegranskat)abstract
- Obesity, hypertension (HTN) and type 2 diabetes (T2D) are among the multifactorial disorders that occur at higher prevalence in a population. This study aims to assess the health-related quality of life (HRQoL) of patients with obesity, HTN and T2D individually and in the form of multimorbidity. A questionnaire-based cross-sectional study was conducted among the patients in 15 private clinics of Punjab, Pakistan. A stratified random sampling technique was used to collect the data from patients with obesity, HTN and T2D or their comorbidity. A total of 1350 patients responded by completing the questionnaire. The HRQoL of these patients was assessed using the EQ-5D-5L questionnaire (a standardized instrument for measuring generic health status). Statistical analysis was performed using chi-square test, Mann-Whitney U test, and Kruskal-Wallis test. Multivariate linear regression model was used to model the visual analogue scale (VAS) score. In total, 15% of patients had combined obesity, HTN and T2D; 16.5% had HTN and T2D; 13.5% had obesity and HTN and 12.8% had obesity and T2D. Only 15.8% of patients had obesity, 14.3% had HTN, and 12% had T2D. Mann Whitney-U test gave the statistically significant (p = <0.001) HRQoL VAS score55.1 (±23.2) of patients with the obesity. HRQoL VAS scores of patients with obesity were found to be higher when compared to patients with both T2D 49.8 (±15.4) and HTN 48.2 (±21). Diagnosis of one, two and three diseases showed significant results in VAS with all variables including gender (p = 0.004), educational level (p = <0.001), marital status (p<0.001), residence (p = <0.001), financial situation (p = <0.001) and monthly income (p = <0.001). The most frequently observed extremely problematic dimension was anxiety/ depression (47%) and the self-care (10%) was the least affected. Patient HRQoL is decreased by T2D, HTN, and obesity. The impact of these diseases coexisting is more detrimental to HRQoL.
|
|
| 11. |
- Vos, Theo, et al.
(författare)
-
Global, regional, and national incidence, prevalence, and years lived with disability for 301 acute and chronic diseases and injuries in 188 countries, 1990-2013: a systematic analysis for the Global Burden of Disease Study 2013
- 2015
-
Ingår i: The Lancet. - 1474-547X .- 0140-6736. ; 386:9995, s. 743-800
-
Tidskriftsartikel (refereegranskat)abstract
- Background Up-to-date evidence about levels and trends in disease and injury incidence, prevalence, and years lived with disability (YLDs) is an essential input into global, regional, and national health policies. In the Global Burden of Disease Study 2013 (GBD 2013), we estimated these quantities for acute and chronic diseases and injuries for 188 countries between 1990 and 2013. Methods Estimates were calculated for disease and injury incidence, prevalence, and YLDs using GBD 2010 methods with some important refinements. Results for incidence of acute disorders and prevalence of chronic disorders are new additions to the analysis. Key improvements include expansion to the cause and sequelae list, updated systematic reviews, use of detailed injury codes, improvements to the Bayesian meta-regression method (DisMod-MR), and use of severity splits for various causes. An index of data representativeness, showing data availability, was calculated for each cause and impairment during three periods globally and at the country level for 2013. In total, 35 620 distinct sources of data were used and documented to calculated estimates for 301 diseases and injuries and 2337 sequelae. The comorbidity simulation provides estimates for the number of sequelae, concurrently, by individuals by country, year, age, and sex. Disability weights were updated with the addition of new population-based survey data from four countries. Findings Disease and injury were highly prevalent; only a small fraction of individuals had no sequelae. Comorbidity rose substantially with age and in absolute terms from 1990 to 2013. Incidence of acute sequelae were predominantly infectious diseases and short-term injuries, with over 2 billion cases of upper respiratory infections and diarrhoeal disease episodes in 2013, with the notable exception of tooth pain due to permanent caries with more than 200 million incident cases in 2013. Conversely, leading chronic sequelae were largely attributable to non-communicable diseases, with prevalence estimates for asymptomatic permanent caries and tension-type headache of 2.4 billion and 1.6 billion, respectively. The distribution of the number of sequelae in populations varied widely across regions, with an expected relation between age and disease prevalence. YLDs for both sexes increased from 537.6 million in 1990 to 764.8 million in 2013 due to population growth and ageing, whereas the age-standardised rate decreased little from 114.87 per 1000 people to 110.31 per 1000 people between 1990 and 2013. Leading causes of YLDs included low back pain and major depressive disorder among the top ten causes of YLDs in every country. YLD rates per person, by major cause groups, indicated the main drivers of increases were due to musculoskeletal, mental, and substance use disorders, neurological disorders, and chronic respiratory diseases; however HIV/AIDS was a notable driver of increasing YLDs in sub-Saharan Africa. Also, the proportion of disability-adjusted life years due to YLDs increased globally from 21.1% in 1990 to 31.2% in 2013. Interpretation Ageing of the world's population is leading to a substantial increase in the numbers of individuals with sequelae of diseases and injuries. Rates of YLDs are declining much more slowly than mortality rates. The non-fatal dimensions of disease and injury will require more and more attention from health systems. The transition to non-fatal outcomes as the dominant source of burden of disease is occurring rapidly outside of sub-Saharan Africa. Our results can guide future health initiatives through examination of epidemiological trends and a better understanding of variation across countries.
|
|
| 12. |
- Abbas, Haider, et al.
(författare)
-
Security, Safety and Trust Management
- 2017
-
Ingår i: 2017 IEEE 26th International Conference on Enabling Technologies: Infrastructure for Collaborative Enterprises. - : IEEE Computer Society. - 9781538617595 ; , s. 242-243
-
Konferensbidrag (refereegranskat)abstract
- The continuously evolving nature of today's internet outdates the existing security and safety mechanisms and therefore there is an emerging need to propose robust, powerful and reliable solutions. These advancements have a great impact on the software and system architectures, resulting in a highly dynamic smart networked environment. The systems used within these complex environments have at least two things in common, namely, the need to restrict or grant access for the required resources based on security policy to face security threats, and the need to sustain resilience of the environment in face of safety hazards. Both aspects should consider trust.
|
|
| 13. |
- Ahmad, Nafees, et al.
(författare)
-
Pitx3 directly regulates Foxe3 during early lens development.
- 2013
-
Ingår i: The International journal of developmental biology. - : UPV/EHU Press. - 1696-3547 .- 0214-6282. ; 57, s. 741-751
-
Tidskriftsartikel (refereegranskat)abstract
- Pitx3 is a bicoid-related homeodomain transcription factor critical for the development of the ocular lens, mesencephalic dopaminergic neurons and skeletal muscle. In humans, mutations in PITX3 are responsible for cataracts and anterior segment abnormalities of varying degree; polymorphisms are associated with Parkinsons disease. In aphakia (ak) mice, two deletions in the promoter region of Pitx3 cause abnormal lens development. Here, we investigated systematically the role of Pitx3 in lens development including its molecular targets responsible for the ak phenotype. We have shown that ak lenses exhibit reduced proliferation and aberrant fiber cell differentiation. This was associated with loss of Foxe3 expression, complete absence of Prox1 expression, reduced expression of epsilon-tubulin and earlier expression of gamma-crystallin during lens development. Using EMSA and ChIP assays, we demonstrated that Pitx3 binds to an evolutionary conserved bicoid-binding site on the 5-upstream region of Foxe3. Finally, Pitx3 binding to 5-upstream region of Foxe3 increased transcriptional activity significantly in a cell-based reporter assay. Identification of Foxe3 as a transcriptional target of Pitx3 explains at least in part some of the phenotypic similarities of the ak and dyl mice (dysgenic lens, a Foxe3 allele). These findings enhance our understanding of the molecular cascades which subserve lens development.
|
|
| 14. |
- Ali, Raja Hashim, et al.
(författare)
-
Tracing the evolution of FERM domain of Kindlins
- 2014
-
Ingår i: Molecular Phylogenetics and Evolution. - : Elsevier. - 1055-7903 .- 1095-9513. ; 80, s. 193-204
-
Tidskriftsartikel (refereegranskat)abstract
- Kindlin proteins represent a novel family of evolutionarily conserved FERM domain containing proteins (FDCPs) and are members of B4.1 superfamily. Kindlins consist of three conserved protein homologs in vertebrates: Kindlin-1, Kindlin-2 and Kindlin-3. All three homologs are associated with focal adhesions and are involved in Integrin activation. FERM domain of each Kindlin is bipartite and plays a key role in Integrin activation. A single ancestral Kindlin protein can be traced back to earliest metazoans, e.g., to Parazoa. This protein underwent multiple rounds of duplication in vertebrates, leading to the present Kindlin family. In this study, we trace phylogenetic and evolutionary history of Kindlin FERM domain with respect to FERM domain of other FDCPs. We show that FERM domain in Kindlin homologs is conserved among Kindlins but amount of conservation is less in comparison with FERM domain of other members in B4.1 superfamily. Furthermore, insertion of Pleckstrin Homology like domain in Kindlin FERM domain has important evolutionary and functional consequences. Important residues in Kindlins are traced and ranked according to their evolutionary significance. The structural and functional significance of high ranked residues is highlighted and validated by their known involvement in Kindlin associated diseases. In light of these findings, we hypothesize that FERM domain originated from a proto-Talin protein in unicellular or proto-multicellular organism and advent of multi-cellularity was accompanied by burst of FDCPs, which supported multi-cellularity functions required for complex organisms. This study helps in developing a better understanding of evolutionary history of FERM domain of FDCPs and the role of FERM domain in metazoan evolution.
|
|
| 15. |
- Asif, M., et al.
(författare)
-
Developing Neck Circumference Growth Reference Charts for Pakistani Children and Adolescents Using the Lambda-Mu-Sigma (LMS) and Quantile Regression Method
- 2021
-
Ingår i: Public Health Nutrition. - : Cambridge University Press. - 1368-9800 .- 1475-2727. ; 24:17, s. 5641-5649
-
Tidskriftsartikel (refereegranskat)abstract
- Objective: Neck circumference (NC) is currently used as an embryonic marker of obesity and its associated risks. But its use in clinical evaluations and other epidemiological purposes requires sex and age-specific standardized cut-offs which are still scarce for the Pakistani pediatric population. We therefore developed sex and age-specific growth reference charts for NC for Pakistani children and adolescents aged 2-18 years.Design: Cross-sectional multi-ethnic anthropometric survey (MEAS) study.Setting: Multan, Lahore, Rawalpindi and Islamabad.Participants: The dataset of 10,668 healthy Pakistani children and adolescents aged 2 to 18 years collected in MEAS were used. Information related to age, sex and NC were taken as study variables. The lambda-mu-sigma (LMS) and quantile regression (QR) methods were applied to develop growth reference charts for NC.Results: The 5th, 10th, 25th, 50th, 75th, 90th and 95th smoothed percentile values of NC were presented. The centile values showed that neck size increased with age in both boys and girls. During 8 and 14 years of age, girls were found to have larger NC than boys. A comparison of NC median (50th) percentile values with references from Iranian and Turkish populations reveals substantially lower NC percentiles in Pakistani children and adolescents compared to their peers in the reference population.Conclusion: The comparative results suggest that the uses of NC references of developed countries are inadequate for Pakistani children. A small variability between empirical centiles and centiles obtained by QR procedure recommends that growth charts should be constructed by QR as an alternative method.
|
|
| 16. |
- Aslam, Bilal, et al.
(författare)
-
A compact implantable RFID tag antenna dedicated to wireless health care
- 2017
-
Ingår i: International Journal of RF and Microwave Computer-Aided Engineering. - : John Wiley & Sons. - 1096-4290 .- 1099-047X. ; 27:5
-
Tidskriftsartikel (refereegranskat)abstract
- Implantable tag antennas are an integral component of contemporary pervasive patient monitoring setups envisioned to reduce the medical errors and improve the quality of health care facilities. These tags, embedded into the human body, transmit critical patient information to the external equipment via a wireless communication link. This research article presents an implantable compact folded dipole antenna of size 10 mm 3 15 mm 3 2 mm, designed to operate in the industrial-scientificmedical band (2.4-2.48GHz). A three-layered phantom representing the human arm is used to evaluate the subcutaneous antenna performance. The tag antenna embedded in the middle of the fat layer offers a maximum gain of 216.3 dBi. The tag antenna performance as a function of implant position and phantom dimensions is analyzed. Link budget calculations show that with the achieved antenna gain the link power exceeds the required power by 38.37 dBm, and hence wireless communication is viable.
|
|
| 17. |
- Aslam, Bilal, et al.
(författare)
-
Frequency signature chipless RFID tag with enhanced data capacity
- 2015
-
Ingår i: IEICE Electronics Express. - : Institute of Electronics, Information and Communications Engineers (IEICE). - 1349-2543. ; 12:17
-
Tidskriftsartikel (refereegranskat)abstract
- Frequency signature chipless RFID tag based on spurline resonator is presented in this letter. Resonant response of spurline is explained by analyzing the surface current distribution. Chipless tag consists of a data encoding circuit and two cross polarised monopole antennas. The tag has a data capacity of 16 bits in the range 2.13 to 4.1 GHz. Data capacity of data encoding circuit is enhanced by repositioning the spurlines. The prototype of the tag is fabricated on FR4 substrate. Developed tag can be used for cost effective identification of items in the industry.
|
|
| 18. |
- Aslam, B., et al.
(författare)
-
Miniaturized decoupled slotted patch RFID tag antennas for wearable health care
- 2017
-
Ingår i: International Journal of RF and Microwave Computer-Aided Engineering. - : John Wiley & Sons. - 1096-4290 .- 1099-047X. ; 27:1
-
Tidskriftsartikel (refereegranskat)abstract
- In this article, a couple of two-layered RFID tag antenna designs exhibiting improved performance descriptors for on-body applications are presented. The antennas are designed to operate in the microwave band (2.4–2.48 GHz) ensuring high data transmission rates ideal for real-time subject monitoring applications. The radiating element of both the antennas is a slotted patch structure provisioned with a pair of T-shaped slots realized on a commercial FR4 substrate. The augmentation of a systematic sequence of narrow comb-like etchings into the design enhances the impedance bandwidth considerably. A high permittivity silicon layer embedded with the radiating patch provides resilience from the human body dielectric losses. A modified antenna design utilizing patch miniaturization technique, resulting in an overall footprint reduction by 32%, is also proposed. The designed tag antennas offer a gain of more than 1.8 dBi and an attractive read range greater than 6.8 m in the operating band.
|
|
| 19. |
- Aslam, Muhammad Shehryar, et al.
(författare)
-
Exploring Multi-Hop LoRa for Green Smart Cities
- 2020
-
Ingår i: IEEE Network. - : IEEE Communications Society. - 0890-8044 .- 1558-156X. ; 34:2, s. 225-231
-
Tidskriftsartikel (refereegranskat)abstract
- With the growing popularity of Internet-of-Things (IoT)-based smart city applications, various long-range and low-power wireless connectivity solutions are under rigorous research. LoRa is one such solution that works in the sub-GHz unlicensed spectrum and promises to provide long-range communication with minimal energy consumption. However, the conventional LoRa networks are single-hop, with the end devices connected to a central gateway through a direct link, which may be subject to large path loss and hence render low connectivity and coverage. This article motivates the use of multi-hop LoRa topologies to enable energy-efficient connectivity in smart city applications. We present a case study that experimentally evaluates and compares single-hop and multi-hop LoRa topologies in terms of range extension and energy efficiency by evaluating packet reception ratio (PRR) for various source to destination distances, spreading factors (SFs), and transmission powers. The results highlight that a multi-hop LoRa network configuration can save significant energy and enhance coverage. For instance, it is shown that to achieve a 90% PRR, a two-hop network provides 50% energy savings as compared to a single-hop network while increasing 35% coverage at a particular SF. In the end, we discuss open challenges in multi-hop LoRa deployment and optimization.
|
|
| 20. |
- Forouzanfar, Mohammad H, et al.
(författare)
-
Global, regional, and national comparative risk assessment of 79 behavioural, environmental and occupational, and metabolic risks or clusters of risks in 188 countries, 1990-2013 : a systematic analysis for the Global Burden of Disease Study 2013.
- 2015
-
Ingår i: The Lancet. - 0140-6736 .- 1474-547X. ; 386:10010, s. 2287-2323
-
Tidskriftsartikel (refereegranskat)abstract
- BACKGROUND: The Global Burden of Disease, Injuries, and Risk Factor study 2013 (GBD 2013) is the first of a series of annual updates of the GBD. Risk factor quantification, particularly of modifiable risk factors, can help to identify emerging threats to population health and opportunities for prevention. The GBD 2013 provides a timely opportunity to update the comparative risk assessment with new data for exposure, relative risks, and evidence on the appropriate counterfactual risk distribution.METHODS: Attributable deaths, years of life lost, years lived with disability, and disability-adjusted life-years (DALYs) have been estimated for 79 risks or clusters of risks using the GBD 2010 methods. Risk-outcome pairs meeting explicit evidence criteria were assessed for 188 countries for the period 1990-2013 by age and sex using three inputs: risk exposure, relative risks, and the theoretical minimum risk exposure level (TMREL). Risks are organised into a hierarchy with blocks of behavioural, environmental and occupational, and metabolic risks at the first level of the hierarchy. The next level in the hierarchy includes nine clusters of related risks and two individual risks, with more detail provided at levels 3 and 4 of the hierarchy. Compared with GBD 2010, six new risk factors have been added: handwashing practices, occupational exposure to trichloroethylene, childhood wasting, childhood stunting, unsafe sex, and low glomerular filtration rate. For most risks, data for exposure were synthesised with a Bayesian meta-regression method, DisMod-MR 2.0, or spatial-temporal Gaussian process regression. Relative risks were based on meta-regressions of published cohort and intervention studies. Attributable burden for clusters of risks and all risks combined took into account evidence on the mediation of some risks such as high body-mass index (BMI) through other risks such as high systolic blood pressure and high cholesterol.FINDINGS: All risks combined account for 57·2% (95% uncertainty interval [UI] 55·8-58·5) of deaths and 41·6% (40·1-43·0) of DALYs. Risks quantified account for 87·9% (86·5-89·3) of cardiovascular disease DALYs, ranging to a low of 0% for neonatal disorders and neglected tropical diseases and malaria. In terms of global DALYs in 2013, six risks or clusters of risks each caused more than 5% of DALYs: dietary risks accounting for 11·3 million deaths and 241·4 million DALYs, high systolic blood pressure for 10·4 million deaths and 208·1 million DALYs, child and maternal malnutrition for 1·7 million deaths and 176·9 million DALYs, tobacco smoke for 6·1 million deaths and 143·5 million DALYs, air pollution for 5·5 million deaths and 141·5 million DALYs, and high BMI for 4·4 million deaths and 134·0 million DALYs. Risk factor patterns vary across regions and countries and with time. In sub-Saharan Africa, the leading risk factors are child and maternal malnutrition, unsafe sex, and unsafe water, sanitation, and handwashing. In women, in nearly all countries in the Americas, north Africa, and the Middle East, and in many other high-income countries, high BMI is the leading risk factor, with high systolic blood pressure as the leading risk in most of Central and Eastern Europe and south and east Asia. For men, high systolic blood pressure or tobacco use are the leading risks in nearly all high-income countries, in north Africa and the Middle East, Europe, and Asia. For men and women, unsafe sex is the leading risk in a corridor from Kenya to South Africa.INTERPRETATION: Behavioural, environmental and occupational, and metabolic risks can explain half of global mortality and more than one-third of global DALYs providing many opportunities for prevention. Of the larger risks, the attributable burden of high BMI has increased in the past 23 years. In view of the prominence of behavioural risk factors, behavioural and social science research on interventions for these risks should be strengthened. Many prevention and primary care policy options are available now to act on key risks.FUNDING: Bill & Melinda Gates Foundation.
|
|
| 21. |
- Gron, K. L., et al.
(författare)
-
The association of fatigue, comorbidity burden, disease activity, disability and gross domestic product in patients with rheumatoid arthritis. : Results from 34 countries participating in the Quest-RA programme
- 2014
-
Ingår i: Clinical and Experimental Rheumatology. - 0392-856X .- 1593-098X. ; 32:6, s. 869-877
-
Tidskriftsartikel (refereegranskat)abstract
- Objective The aim is to assess the prevalence of comorbidities and to further analyse to which degree fatigue can be explained by comorbidity burden, disease activity, disability and gross domestic product (GDP) in patients with rheumatoid arthritis (RA). Methods Nine thousands eight hundred seventy-four patients from 34 countries, 16 with high GDP (>24.000 US dollars [USD] per capita) and 18 low-GDP countries (<24.000 USD) participated in the Quantitative Standard monitoring of Patients with RA (QUEST-RA) study. The prevalence of 31 comorbid conditions, fatigue (0-10 cm visual analogue scale [VAS] [10 worst]), disease activity in 28 joints (DAS28), and physical disability (Health Assessment Questionnaire score MAW) were assessed. Univariate and multivariate linear regression analyses were performed to assess the association between fatigue and comorbidities, disease activity, disability and GDP. Results Overall, patients reported a median of 2 comorbid conditions of which hypertension (31.5%), osteoporosis (17.6%), osteoarthritis (15.5%) and hyperlipidaemia (14.2%) were the most prevalent. The majority of comorbidities were more common in high-GDP countries. The median fatigue score was 4.4 (4.8 in low-GDP countries and 3.8 in high-GDP countries, p<0.001). In low-GDP countries 25.4% of the patients had a high level of fatigue (>6.6) compared with 23.0% in high-GDP countries (p<0.001). In univariate analysis, fatigue increased with increasing number of comorbidities, disease activity and disability in both high- and low-GDP countries. In multivariate analysis of all countries, these 3 variables explained 29.4% of the variability, whereas GDP was not significant. Conclusion Fatigue is a widespread problem associated with high comorbidity burden, disease activity and disability regardless of GDP.
|
|
| 22. |
- Jamil, Asif, et al.
(författare)
-
Polyetherimide-Montmorillonite Nano-Hybrid Composite Membranes : CO2 Permeance Study via Theoretical Models
- 2020
-
Ingår i: Processes. - : MDPI. - 2227-9717. ; 8:1
-
Tidskriftsartikel (refereegranskat)abstract
- The incorporation of aminolauric acid modified montmorillonite (f-MMT) in polyetherimide (PEI) has been implemented to develop hollow fibre nano-hybrid composite membranes (NHCMs) with improved gas separation characteristics. The aforementioned characteristics are caused by enhanced f-MMT spatial dispersion and interfacial interactions with PEI matrix. In this study, existing gas permeation models such as, Nielsen, Cussler, Yang-Cussler, Lape-Cussler and Bharadwaj were adopted to estimate the dispersion state of f-MMT and to predict the CO2 permeance in developed NHCMs. It was found out that the average aspect ratio estimated was 53, with 3 numbers of stacks per unit tactoid, which showed that the intercalation f-MMT morphology is the dominating dispersion state of filler in PEI matrix. Moreover, it was observed that Bharadwaj model showed the least average absolute relative error (%AARE) values till 3 wt. % f-MMT loading in the range of +/- 10 for a pressure range of 2 to 10 bar. Hence, Bharadwaj was the best fit model for the experimental data compared to other models, as it considers the platelets orientation.
|
|
| 23. |
- Javed, Muhammad Faisal, et al.
(författare)
-
Evaluation of machine learning models for predicting TiO2 photocatalytic degradation of air contaminants
- 2024
-
Ingår i: Scientific Reports. - : Springer Nature. - 2045-2322. ; 14
-
Tidskriftsartikel (refereegranskat)abstract
- The escalation of global urbanization and industrial expansion has resulted in an increase in the emission of harmful substances into the atmosphere. Evaluating the effectiveness of titanium dioxide (TiO2) in photocatalytic degradation through traditional methods is resource-intensive and complex due to the detailed photocatalyst structures and the wide range of contaminants. Therefore in this study, recent advancements in machine learning (ML) are used to offer data-driven approach using thirteen machine learning techniques namely XG Boost (XGB), decision tree (DT), lasso Regression (LR2), support vector regression (SVR), adaBoost (AB), voting Regressor (VR), CatBoost (CB), K-Nearest Neighbors (KNN), gradient boost (GB), random Forest (RF), artificial neural network (ANN), ridge regression (RR), linear regression (LR1) to address the problem of estimation of TiO2 photocatalytic degradation rate of air contaminants. The models are developed using literature data and different methodical tools are used to evaluate the developed ML models. XGB, DT and LR2 models have high R2 values of 0.93, 0.926 and 0.926 in training and 0.936, 0.924 and 0.924 in test phase. While ANN, RR and LR models have lowest R2 values of 0.70, 0.56 and 0.40 in training and 0.62, 0.63 and 0.31 in test phase respectively. XGB, DT and LR2 have low MAE and RMSE values of 0.450 min-1/cm2, 0.494 min-1/cm2 and 0.49 min-1/cm2 for RMSE and 0.263 min-1/cm2, 0.285 min-1/cm2 and 0.29 min-1/cm2 for MAE in test stage. XGB, DT, and LR2 have 93% percent errors within 20% error range in training phase. XGB has 92% and DT, and LR2 have 94% errors with 20% range in test phase. XGB, DT, LR2 models remained the highest performing models and XGB is the most robust and effective in predictions. Feature importances reveal the role of input parameters in prediction made by developed ML models. Dosage, humidity, UV light intensity remain important experimental factors. This study will impact positively in providing efficient models to estimate photocatalytic degradation rate of air contaminants using TiO2.
|
|
| 24. |
- Khalid, Muhammad, et al.
(författare)
-
Frontier molecular, natural bond orbital, UV-VIS spectral study, solvent influence on geometric parameters, vibrational frequencies and solvation energies of 8-hydroxyquinoline
- 2017
-
Ingår i: International Journal of Pharmaceutical Sciences and Research. - : International Journal of Pharmaceutical Sciences and Research. - 0975-8232. ; 8:2, s. 457-469
-
Tidskriftsartikel (refereegranskat)abstract
- N-heterocyclic compounds have extensive biological and pharmaceutical applications. 8-Hydroxyquinoline (8-HQ) also plays a significant role in many fields of life. The excellent biological significance of the 8-HQ prompted us to extend the DFT based studies. The frontier molecular orbitals (FMOs), UV-VIS and solvation model based studies remained unknown. Therefore, we intended to study the natural bond orbital, FMOs, UV-VIS, thermodynamic properties and medium influence on solvation energies, dipole moment, FTIR and FT-Raman using polarizable continuum model (PCM) and density-based solvation model (SMD). The electronic properties of molecule were calculated by M06-2X/6-31G (d,P) and B3LYP/6-31G (d,p) level of theories. The solvent influence on the geometric parameters, FT-IR and FT-Raman were studied by B3LYP /6-31G(d) method. A good correspondence is found between the optimized parameters and the reported X-ray data. Natural bond orbital reveals that the maximum stabilization energy reached up to 39.64kJ/mol which is responsible for extra stability of the molecule. In solvated 8-HQ, a significant medium effects on FT-IR and FT-Raman intensities is observed. The intensities enhanced from gas to solvent phase. The solvation free energies are found to be -28.710 and -39.456 kJ/mol in PCM and SMD models respectively. FMOs suggested that this molecule contain less hardness and larger softness values. These findings reveal that the molecule might be bioactive.
|
|
| 25. |
- Khalid, Tauqeer, et al.
(författare)
-
A survey on privacy and access control schemes in fog computing
- 2019
-
Ingår i: International Journal of Communication Systems. - : John Wiley and Sons Ltd. - 1074-5351 .- 1099-1131.
-
Tidskriftsartikel (refereegranskat)abstract
- To provide reliable data storage and retrieval services to the end users, the cloud service provider implements secure data storage, sharing, and retrieval mechanisms. However, the aforesaid services provided by cloud have certain pitfalls, such as decision latency and real-time data computation. To address these aforementioned problems, fog computing was introduced for the purpose of providing cloud services at the network's edge. While this migration of the cloud services to the network's edge raises various security concerns, such as trust, authentication, mobility, intrusion, network security, and secure data computation. Among these concerns, the most critical issues that need immediate attention of researchers and practitioners are of privacy and access control in fog computing which are in direct relation to secure data storage and retrieval purposes. So, in order to highlight their importance for research community, this survey embodies to discuss, explain, and compare various privacy preserving and access control schemes in the context of fog computing for classifying and analyzing similarities and variances with respect to other researchers. Moreover, upon classification and analysis of these schemes, various open issues and future directions are also presented for researchers and practitioners for the purpose of enhancing security algorithms to address privacy and access control issues in fog computing.
|
|
| 26. |
- Khan, Ammad Aslam, et al.
(författare)
-
Evolutionary History of Alzheimer Disease-Causing Protein Family Presenilins with Pathological Implications
- 2020
-
Ingår i: Journal of Molecular Evolution. - : SPRINGER. - 0022-2844 .- 1432-1432. ; 88:8-9, s. 674-688
-
Tidskriftsartikel (refereegranskat)abstract
- Presenilin proteins make the catalytic component of gamma-secretase, a multiprotein transmembrane protease, and are type II transmembrane proteins. Amyloid protein, Notch, and beta catenin are among more than 90 substrates of Presenilins. Mutations in Presenilins lead to defects in proteolytic cleavage of its substrate resulting in some of the most devastating pathological conditions including Alzheimer disease (AD), developmental disorders, and cancer. In addition to catalytic roles, Presenilin protein is also shown to be involved in many non-catalytic roles, i.e., calcium homeostasis, regulation of autophagy, and protein trafficking, etc. These proteolytic proteins are highly conserved and are present in almost all the major eukaryotic groups. Studies, performed on a wide variety of organisms ranging from human to unicellular dictyostelium, have shown the important catalytic and non-catalytic roles of Presenilins. In this study, we infer the evolutionary patterns and history of Presenilins as well as of other gamma-secretase proteins. We show that Presenilins are the most ancient of the gamma-secretase proteins and that Presenilins may have their origin in the last common ancestor (LCA) of Eukaryotes. We also demonstrate that Presenilin proteins generally lack diversifying selection during the course of their evolution. Through evolutionary trace analysis, we show that Presenilin protein sites that undergo mutations in Familial Alzheimer disease, are highly conserved in metazoans. Finally, we discuss the evolutionary, physiological, and pathological implications of our findings and propose that the evolutionary profile of Presenilins supports the loss of function hypothesis of AD pathogenesis.
|
|
| 27. |
- Khan, Umar Hasan, et al.
(författare)
-
Compact RFID Enabled Moisture Sensor
- 2016
-
Ingår i: Radioengineering. - : Spolecnost Pro Radioelektronicke Inzenyrstvi. - 1210-2512 .- 1805-9600. ; 25:3, s. 449-456
-
Tidskriftsartikel (refereegranskat)abstract
- This research proposes a novel, low-cost RFID tag sensor antenna implemented using commercially available Kodak photo-paper. The aim of this paper is to investigate the possibility of stable, RFID centric communication under varying moisture levels. Variation in the frequency response of the RFID tag in presence of moisture is used to detect different moisture levels. Combination of unique jaw shaped contours and T-matching network is used for impedance matching which results in compact size and minimal ink consumption. Proposed tag is 1.4x9.4 cm(2) in size and shows optimum results for various moisture levels upto 45 % in FCC band with a bore sight read range of 12.1 m.
|
|
| 28. |
- Khan, Umar Hasan, et al.
(författare)
-
Localization of Compact Circularly Polarized RFID Tag Using ToA Technique
- 2017
-
Ingår i: Radioengineering. - : SPOLECNOST PRO RADIOELEKTRONICKE INZENYRSTVI. - 1210-2512 .- 1805-9600. ; 26:1, s. 147-153
-
Tidskriftsartikel (refereegranskat)abstract
- A compact, flexible crossed-dipole circularly polarized antenna using commercially available paper substrate is presented which caters North American frequency band. The crossed-dipoles have meandered lines for reduction of size as well as increased inductivity in the antenna. Dipoles have asymmetric T-shaped rectangular endings to provide the required compactness. Two semicircles are induced between the orthogonal dipoles and meandering matching structure to accomplish circular polarization excitation. Good impedance matching with the chip is achieved through a modified meander line matching structure. The proposed design dimensions are 32 x 32 x 0.4 mm(3). Systematic analysis revealed the results comprising circular polarization 3dB-AR bandwidth of 12 MHz (908-920 MHz) and power transmission coefficient bandwidth of 36 MHz (900-936 MHz). Time delay between interrogating signal and backscattered signal is measured and relative distance is calculated. Linear Least Square (LLS) method is applied to approximate the position of tag in interrogation area. The proposed tag is placed at known locations and its position is measured to analyze accuracy of the method by simulating the positioning algorithm code in MATLAB. Six valid tag positions 0.5-2 m read range and 0 degrees-150 degrees angular resolution has been investigated.
|
|
| 29. |
- Khan, Umar Hasan, et al.
(författare)
-
Novel chipless displacement sensor circuit using spurline resonantor
- 2016
-
Ingår i: IEICE Electronics Express. - : Institute of Electronics Information Communication Engineers. - 1349-2543. ; 13:23
-
Tidskriftsartikel (refereegranskat)abstract
- A novel uni-dimensional chipless displacement sensor circuit based on spurline resonators is presented. Sensor circuit design consists of two components: series of spurline resonators and a selector element. In response to displacement, the selector element slides over the spurline resonator slots that translating this movement into a corresponding change in the circuit's frequency response. The designed circuit offers a capacity of 16 bits in the 2-4.2 GHz frequency band. Half of the bits are designated as the sensory bits, while the other half are attributed as the ID bits. The formulated sensor has a dynamic range from 0-3.75 mm and a minimum resolution of 0.25 mm. The proposed sensor is a prime candidate for deployment in smart cities for ubiquitous infrastructural health monitoring.
|
|
| 30. |
- Khan, Zeshan Aslam, et al.
(författare)
-
A Multi-agent Model for Fire Detection in Coal Mines using Wireless Sensor Networks
- 2013
-
Ingår i: 2013 12th IEEE International Conference on Trust, Security and Privacy in Computing and Communications. - Los Alamitos, CA : IEEE Computer Society. - 9780769550220 ; , s. 1754-1761
-
Konferensbidrag (refereegranskat)abstract
- This paper presents an application for monitoring and detection of fire in coal mines using wireless sensor networks (WSNs). The application uses BDI (Belief, Desire and Intention) based multi-agent model and its implementation on sensor networks. The language used for implementation is interpreted by Jason; an extension of AgentSpeak which is based on the BDI Architecture. The BDI agents are reactive planning systems; systems that are not meant to compute the value of a function and terminate but rather designed to be permanently running and reacting to some form of event. The distributed model of the environment is adopted to overcome the communication overhead, power consumption, network delay and reliability on a centralized base station. © 2013 IEEE.
|
|
| 31. |
- Naqvi, Salman Raza, et al.
(författare)
-
Recent developments on sewage sludge pyrolysis and its kinetics : Resources recovery, thermogravimetric platforms, and innovative prospects
- 2021
-
Ingår i: Computers and Chemical Engineering. - : Elsevier. - 0098-1354 .- 1873-4375. ; 150
-
Tidskriftsartikel (refereegranskat)abstract
- Sewage sludge is a by-product of the wastewater treatment process, which has the potential to be a source of transport fuels, heat, and power using the pyrolysis process. Considering the prevalence and disposal issues associated with sewage sludge, the objective of this study is to critically review the recent advancements in sewage sludge pyrolysis and its kinetics obtained using the thermogravimetric techniques, and other associated different kinetic models documented in the literature. The study will identify optimum operating conditions and design parameters to obtain high yields. The state-of-the-art perspectives and the challenges associated with full-scale implementation are highlighted for biofuels and resource recovery from the sewage sludge. Furthermore, machine-learning approaches in thermal kinetics of pyrolysis are presented and discussed in terms of their effectiveness in predicting thermal kinetics data. Finally, the challenges for a successful implementation and commercial viability of sewage sludge pyrolysis are discussed.
|
|
| 32. |
- Naveed, Muhammad Hamza, et al.
(författare)
-
Cellulosic biomass fermentation for biofuel production : Review of artificial intelligence approaches
- 2024
-
Ingår i: Renewable & sustainable energy reviews. - : Elsevier. - 1364-0321 .- 1879-0690. ; 189
-
Tidskriftsartikel (refereegranskat)abstract
- Scarcity in fossil fuel reserves and their environmental impacts has forced the world towards the production of clean and environment-friendly fuels called biofuels. This review focuses on the importance of different machine learning models and optimization techniques to simulate and optimize process conditions, yield and parameters in the fermentation of cellulosic biomass from fifty recent studies. The superiority of ML models, especially ANN dominance in 70 % of studies with highest coefficient of regression over conventional techniques in the production of bioethanol and biohydrogen is comprehensively reviewed. Research gaps and studies directed toward the usage of most optimum ML models in future are directed after the sensitivity analysis with 5 % variation that suggest the stability of ML models. It is intended to spur further investigation into the development and use of ML models combined with optimization methods and CFD in the fermentation process to produce bioethanol and biohydrogen.
|
|
| 33. |
- Yameen, Muhammad Zubair, et al.
(författare)
-
Harnessing the power of functionalized biochar : progress, challenges, and future perspectives in energy, water treatment, and environmental sustainability
- 2024
-
Ingår i: Biochar. - : Springer. - 2524-7972 .- 2524-7867. ; 6:1
-
Forskningsöversikt (refereegranskat)abstract
- The swift advancement of sustainable energy technologies, coupled with the urgent need to address environmental challenges, has generated considerable interest in the multifaceted applications of biochar materials to promote energy, water, and environmental sustainability. This comprehensive review examines recent advancements in the production and applications of functionalized biochar materials, emphasizing their pivotal roles in energy conversion and storage, wastewater treatment, CO2 reduction, soil amelioration, and the promotion of carbon neutrality within a circular economy framework. The functionalization of biochar materials involves surface chemistry and porosity modifications, achieved through techniques like templating, chemical activation, metal impregnation, or heteroatom doping. These modifications substantially enhance the catalytic activity, energy storage capacity, and cycling stability of biochar materials, making them particularly effective in diverse energy applications such as water splitting, fuel cells, and supercapacitors. Additionally, functionalized biochar materials demonstrate remarkable efficacy as catalysts and adsorbents in wastewater treatment, proficiently removing pollutants like heavy metals, organic contaminants, and nutrients, thereby facilitating resource recovery from wastewater. The review also underscores the potential of functionalized biochar materials in CO2 capture and conversion, exploring innovative strategies to augment their CO2 adsorption capacity and state-of-the-art catalytic processes for transforming captured CO2 into valuable fuels and chemicals. In summary, this review offers valuable insights into the recent advancements in biochar research, underscoring its substantial commercial potential as a versatile material contributing to a cleaner and more sustainable future.Article HighlightsThe current status of biochar research is comprehensively reviewed.The potential of biochar in energy, water, and environmental fields is critically examined.Technology readiness levels (TRLs) of various biochar-based technologies are evaluated.
|
|
