| 1. |
- Asmolov, V.G., et al.
(författare)
-
Partitioning of Zr, U and FP between Molten Oxidic and Metallic Corium
- 2004
-
Ingår i: Proceeding of MASCA Seminar.
-
Konferensbidrag (refereegranskat)abstract
- Interaction of molten corium and liquid iron/stainless steel has been studied in different tests of theMASCA-1 program. These tests utilized the technology of induction melting in a cold crucible. Themasses of tested corium were approximately 0.5, 2 and 100 kg. Representative quantities of Mo, Ru,SrO, BaO, CeO2 and La2O3 served as fission product simulants.After the suboxidized melt - steel interaction U and Zr have been found in the metallic phase.To quantify the partitioning of Zr, U and fission products an extensive experimental program has beenperformed. The following key parameters have been identified: oxygen potential in the melt (degree ofZr-oxidation), the corium/steel mass ratio and U/Zr ratio. The paper discusses the influence of theseparameters on the partitioning of the main species.
|
|
| 2. |
- Bechta, Sevostian, et al.
(författare)
-
Corium phase equilibria based on MASCA, METCOR and CORPHAD results
- 2008
-
Ingår i: Nuclear Engineering and Design. - : Elsevier BV. - 0029-5493 .- 1872-759X. ; 238:10, s. 2761-2771
-
Tidskriftsartikel (refereegranskat)abstract
- Experimental data on component partitioning between suboxidized corium melt and steel in the invessel melt retention (IVR) conditions are compared. The data are produced within the OECD MASCAprogram and the ISTC CORPHAD project under close-to-isothermal conditions and in the ISTC METCORproject under thermal gradient conditions. Chemical equilibrium in the U–Zr–Fe(Cr,Ni,. . .)–O system isreached in all experiments. In MASCA tests the molten pool formed under inert atmosphere has twoimmiscible liquids, oxygen-enriched (oxidic) and oxygen-depleted (metallic), resulting of the miscibilitygap of the mentioned system. Sub-system data of the U–Zr–Fe(Cr,Ni,. . .)–O phase diagram investigatedwithin the ISTC CORPHAD project are interpreted in relation with the MASCA results. In METCOR teststhe equilibrium is established between oxidic liquid and mushy metallic part of the system. Results ofcomparison are discussed and the implications for IVR noted.
|
|
| 3. |
|
|
| 4. |
- Bechta, Sevostian, et al.
(författare)
-
Influence of corium oxidation on fission product release from molten pool
- 2010
-
Ingår i: Nuclear Engineering and Design. - : Elsevier BV. - 0029-5493 .- 1872-759X. ; 240:5, s. 1229-1241
-
Tidskriftsartikel (refereegranskat)abstract
- Qualitative and quantitative determination of the release of low-volatile fission products and core materialsfrom molten oxidic corium was investigated in the EVAN project under the auspices of ISTC. Theexperiments carried out in a cold crucible with induction heating and RASPLAV test facility are described.The results are discussed in terms of reactor application; in particular, pool configuration, melt oxidationkinetics, critical influence of melt surface temperature and oxidation index on the fission productrelease rate, aerosol particle composition and size distribution. The relevance of measured high releaseof Sr from the molten pool for the reactor application is highlighted. Comparisons of the experimentaldata with those from the COLIMA CA-U3 test and the VERCORS tests, as well as with predictions fromIVTANTHERMO and GEMINI/NUCLEA codes are made. Recommendations for further investigations areproposed following the major observations and discussions.
|
|
