| 1. |
- Palacin, M. R., et al.
(författare)
-
Roadmap on multivalent batteries
- 2024
-
Ingår i: JPhys Energy. - 2515-7655. ; 6:3
-
Forskningsöversikt (refereegranskat)abstract
- Battery technologies based in multivalent charge carriers with ideally two or three electrons transferred per ion exchanged between the electrodes have large promises in raw performance numbers, most often expressed as high energy density, and are also ideally based on raw materials that are widely abundant and less expensive. Yet, these are still globally in their infancy, with some concepts (e.g. Mg metal) being more technologically mature. The challenges to address are derived on one side from the highly polarizing nature of multivalent ions when compared to single valent concepts such as Li+ or Na+ present in Li-ion or Na-ion batteries, and on the other, from the difficulties in achieving efficient metal plating/stripping (which remains the holy grail for lithium). Nonetheless, research performed to date has given some fruits and a clearer view of the challenges ahead. These include technological topics (production of thin and ductile metal foil anodes) but also chemical aspects (electrolytes with high conductivity enabling efficient plating/stripping) or high-capacity cathodes with suitable kinetics (better inorganic hosts for intercalation of such highly polarizable multivalent ions). This roadmap provides an extensive review by experts in the different technologies, which exhibit similarities but also striking differences, of the current state of the art in 2023 and the research directions and strategies currently underway to develop multivalent batteries. The aim is to provide an opinion with respect to the current challenges, potential bottlenecks, and also emerging opportunities for their practical deployment.
|
|
| 2. |
- Pavliuk, Mariia V., et al.
(författare)
-
Magnetic Manipulation of Spontaneous Emission from Inorganic CsPbBr3 Perovskites Nanocrystals
- 2016
-
Ingår i: ADVANCED OPTICAL MATERIALS. - : Wiley. - 2195-1071. ; 4:12, s. 2004-2008
-
Tidskriftsartikel (refereegranskat)abstract
- Metal halide perovskites have shown great potential for both light-absorbing and light-emitting devices. It is demonstrated that the presence of a low-magnetic field decreases dramatically the photoluminescence of CsPbBr3. This is found to be due to a decrease in charge separated state lifetime. The effect is fully reversible, and can be exploited for simple and remote modulation of the output of light-emitting devices.
|
|
| 3. |
- Cannelli, Oliviero, et al.
(författare)
-
Atomic-Level Description of Thermal Fluctuations in Inorganic Lead Halide Perovskites
- 2022
-
Ingår i: Journal of Physical Chemistry Letters. - : American Chemical Society (ACS). - 1948-7185. ; 13:15, s. 3382-3391
-
Tidskriftsartikel (refereegranskat)abstract
- A comprehensive microscopic description of thermally induced distortions in lead halide perovskites is crucial for their realistic applications, yet still unclear. Here, we quantify the effects of thermal activation in CsPbBr3 nanocrystals across length scales with atomic-level precision, and we provide a framework for the description of phase transitions therein, beyond the simplistic picture of unit-cell symmetry increase upon heating. The temperature increase significantly enhances the short-range structural distortions of the lead halide framework as a consequence of the phonon anharmonicity, which causes the excess free energy surface to change as a function of temperature. As a result, phase transitions can be rationalized via the soft-mode model, which also describes displacive thermal phase transitions in oxide perovskites. Our findings allow to reconcile temperature-dependent modifications of physical properties, such as changes in the optical band gap, that are incompatible with the perovskite time- and space-average structures.
|
|
| 4. |
|
|
| 5. |
- Sytnyk, Mykhailo, et al.
(författare)
-
Tuning the Magnetic Properties of Metal Oxide Nanocrystal Heterostructures by Cation Exchange
- 2013
-
Ingår i: Nano letters (Print). - : American Chemical Society (ACS). - 1530-6984 .- 1530-6992. ; 13:2, s. 586-593
-
Tidskriftsartikel (refereegranskat)abstract
- For three types of colloidal magnetic nanocrystals, we demonstrate that postsynthetic cation exchange enables tuning of the nanocrystal's magnetic properties and achieving characteristics not obtainable by conventional synthetic routes. While the cation exchange procedure, performed in solution phase approach, was restricted so far to chalcogenide based semiconductor nanocrystals, here ferrite-based nanocrystals were subjected to a Fe2+ to Co2+ cation exchange procedure. This allows tracing of the compositional modifications by systematic and detailed magnetic characterization. In homogeneous magnetite nanocrystals and in gold/magnetite core shell nanocrystals the cation exchange increases the coercivity field, the remanence magnetization, as well as the superparamagnetic blocking temperature. For core/shell nanoheterostructures a selective doping of either the shell or predominantly of the core with Co2+ is demonstrated. By applying the cation exchange to FeO/CoFe2O4 core/shell nanocrystals the Neel temperature of the core material is increased and exchange-bias effects are enhanced so that vertical shifts of the hysteresis loops are obtained which are superior to those in any other system.
|
|
| 6. |
- Yu, Hongling, 1987-
(författare)
-
Color Tuning for Perovskite Light-Emitting Diodes
- 2020
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Metal halide perovskites (MHPs) are recognized as promising semiconductor materials for a variety of optical and electrical device applications due to their cost-effective and outstanding optoelectronic properties. As one of the most significant applications, perovskite light-emitting diodes (PeLEDs) hold promise for future lighting and display technologies, attributed to their high photoluminescence quantum yield (PLQY), high color purity, and tunable emission color. The emission colors of PeLEDs can be tuned by mixing the halide anions, adjusting the size of perovskite nanocrystals, or changing the dimensionality of perovskites. However, in practice, all these different approaches have their own advantages and challenges. This thesis centres around the color tunability of perovskites, aiming to develop PeLEDs with different colors using different approaches.We first demonstrate red and near-infrared PeLEDs using a straightforward approach – in situ solution-processed perovskite quantum dots (PQDs). PQDs prepared from colloidal approaches are widely reported and used in LEDs. In contrast, PQDs prepared from the in situ approaches are hardly reported, although they have advantages for device applications. By employing aromatic ammonium iodide (1-naphthylmethyl ammonium iodide, NMAI) as an agent into perovskite precursor solutions, together with annealing temperature modulation, we obtain in situ grown PQDs delivering high external quantum efficiencies (EQEs) of up to 11.0% with tunable electroluminescence (EL) spectra (667 - 790 nm). Our in situ generated PQDs based on pure-halogen perovskites can be easily obtained through a simple deposition process and free of phase segregation, making them a more promising approach for tuning the emission colors of perovskite LEDs.We then move to blue PeLEDs using cesium-based mixed-Br/Cl perovskites. Although mixed halides are a straightforward strategy to tune the emission color, PeLEDs based on this approach suffer from poor color stability, which is attributed to surface defects at grain boundaries. Under the condition of optical excitations, light density over a certain value (a threshold), oxygen, and surface defects at perovskite grain boundaries are found to be key factors inducing photoluminescence (PL) spectral instability of CsPb(Br1−xClx)3 perovskites. Upon electrical bias, defects at grain boundaries provide undesirable halide migration channels, responsible for EL spectral instability issues. Through effective defect passivation, the PL spectral resistance to oxygen is enhanced; moreover, high-performance and color-stable blue PeLEDs are achieved, delivering a maximum luminance of 5351 cd m–2 and a peak EQE of 4.55% with a peak emission wavelength at 489 nm. These findings provide new insights into the color instability issue of mixed halide blue perovskites, against which we also demonstrate an effective strategy.We finally realize single-emissive-layer (EML) white PeLEDs by employing a mixed halide perovskite film as the EML. In spite of high-performance monochromatic blue, green, and red colors, the development of white PeLEDs, especially for single-EML ones, remains a very big challenge. By effective modulation of the halide salt precursors, we achieve single-EML white PeLEDs with Commission Internationale de L’Eclairage (CIE) coordinates of (0.33, 0.33), close to those (0.3128, 0.3290) of the CIE standard illuminant D65. This work not only provides a successful demonstration of a single-EML white PeLED, but also provides useful guidelines for the future development of highperformance single-EML white PeLEDs.
|
|
