| 1. |
- Aad, G, et al.
(författare)
-
- 2015
-
swepub:Mat__t
|
|
| 2. |
- Abt, I, et al.
(författare)
-
Inclusive V-0 production cross sections from 920 GeV fixed target proton-nucleus collisions
- 2003
-
Ingår i: European Physical Journal C. Particles and Fields. - : Springer Science and Business Media LLC. - 1434-6044. ; 29:2, s. 181-190
-
Tidskriftsartikel (refereegranskat)abstract
- Inclusive differential cross sections dsigma(pA)/dx(F) and dsigma(pA)/dp(t)(2) for the production of K-S(0), Lambda, and (&ULambda;) over bar particles are measured at HERA in proton-induced reactions on C, Al, Ti, and W targets. The incident beam energy is 920 GeV, corresponding to roots = 41.6 GeV in the proton-nucleon system. The ratios of differential cross sections dsigma(pA)(K-S(0))/dsigma(pA)(Lambda) and dsigma(pA)((&ULambda;) over bar)/dsigma(pA) (Lambda) are measured to be 6.2 +/- 0.5 and 0.66 +/- 0.07, respectively, for x(F) approximate to -0.06. No significant dependence upon the target material is observed. Within errors, the slopes of the transverse momentum distributions da,Ald t also show no significant dependence upon the target material. The dependence of the extrapolated total cross sections sigma(pA) on the atomic mass A of the target material is discussed, and the deduced cross sections per nucleon sigma(pN) are compared with results obtained at other energies.
|
|
| 3. |
- Abt, I, et al.
(författare)
-
Measurement of the b(b)over-bar production cross section in 920 GeV fixed-target proton-nucleus collisions
- 2003
-
Ingår i: European Physical Journal C. Particles and Fields. - : Springer Science and Business Media LLC. - 1434-6044. ; 26:3, s. 345-355
-
Tidskriftsartikel (refereegranskat)abstract
- Using the HERA-B detector, the b (b) over bar production cross section has been measured in 920 GeV proton collisions on carbon and titanium targets. The b (b) over bar production was tagged via inclusive bottom quark decays into J/psi by exploiting the longitudinal separation of J/psi --> l(+)l(-) decay vertices from the primary proton-nucleus interaction. Both e(+)e(-) and mu(+)mu(-) channels have been reconstructed and the combined analysis yields the cross section sigma(b (b) over bar) = 32(-12)(+14)(stat) (+6)(-7)(sys) nb/nucleon.
|
|
| 4. |
|
|
| 5. |
|
|
| 6. |
|
|
| 7. |
- Jacobs, Alan M., et al.
(författare)
-
The Qualitative Transparency Deliberations : Insights and Implications
- 2021
-
Ingår i: Perspectives on Politics. - 1537-5927 .- 1541-0986. ; 19:1, s. 171-208
-
Tidskriftsartikel (refereegranskat)abstract
- In recent years, a variety of efforts have been made in political science to enable, encourage, or require scholars to be more open and explicit about the bases of their empirical claims and, in turn, make those claims more readily evaluable by others. While qualitative scholars have long taken an interest in making their research open, reflexive, and systematic, the recent push for overarching transparency norms and requirements has provoked serious concern within qualitative research communities and raised fundamental questions about the meaning, value, costs, and intellectual relevance of transparency for qualitative inquiry. In this Perspectives Reflection, we crystallize the central findings of a three-year deliberative process-the Qualitative Transparency Deliberations (QTD)-involving hundreds of political scientists in a broad discussion of these issues. Following an overview of the process and the key insights that emerged, we present summaries of the QTD Working Groups' final reports. Drawing on a series of public, online conversations that unfolded at www.qualtd.net, the reports unpack transparency's promise, practicalities, risks, and limitations in relation to different qualitative methodologies, forms of evidence, and research contexts. Taken as a whole, these reports-the full versions of which can be found in the Supplementary Materials-offer practical guidance to scholars designing and implementing qualitative research, and to editors, reviewers, and funders seeking to develop criteria of evaluation that are appropriate-as understood by relevant research communities-to the forms of inquiry being assessed. We dedicate this Reflection to the memory of our coauthor and QTD working group leader Kendra Koivu.(1)
|
|
| 8. |
|
|
| 9. |
|
|
| 10. |
|
|
| 11. |
|
|
| 12. |
|
|
| 13. |
|
|
| 14. |
- Cao, Wei, et al.
(författare)
-
Spray-Deposited Anisotropic Ferromagnetic Hybrid Polymer Films of PS-b-PMMA and Strontium Hexaferrite Magnetic Nanoplatelets
- 2021
-
Ingår i: ACS Applied Materials and Interfaces. - : AMER CHEMICAL SOC. - 1944-8244 .- 1944-8252. ; 13:1, s. 1592-1602
-
Tidskriftsartikel (refereegranskat)abstract
- Spray deposition is a scalable and cost-effective technique for the fabrication of magnetic hybrid films containing diblock copolymers (DBCs) and magnetic nanoparticles. However, it is challenging to obtain spray-deposited anisotropic magnetic hybrid films without using external magnetic fields. In the present work, spray deposition is applied to prepare perpendicular anisotropic magnetic hybrid films by controlling the orientation of strontium hexaferrite nanoplatelets inside ultra-high-molecular-weight DBC polystyrene-block-poly(methyl methacrylate) (PS-b-PMMA) films. During spray deposition, the evolution of DBC morphology and the orientation of magnetic nanoplatelets are monitored with in situ grazing-incidence small-angle X-ray scattering (GISAXS). For reference, a pure DBC film without nanoplatelets is deposited with the same conditions. Solvent-controlled magnetic properties of the hybrid film are proven with solvent vapor annealing (SVA) applied to the final deposited magnetic films. Obvious changes in the DBC morphology and nanoplatelet localization are observed during SVA. The superconducting quantum interference device data show that ferromagnetic hybrid polymer films with high coercivity can be achieved via spray deposition. The hybrid films show a perpendicular magnetic anisotropy before SVA, which is strongly weakened after SVA. The spray-deposited hybrid films appear highly promising for potential applications in magnetic data storage and sensors.
|
|
| 15. |
- Chen, Wei, et al.
(författare)
-
In situ Grazing-Incidence Small-Angle X-ray Scattering Observation of Gold Sputter Deposition on a PbS Quantum Dot Solid
- 2020
-
Ingår i: ACS Applied Materials and Interfaces. - : NLM (Medline). - 1944-8244 .- 1944-8252. ; 12:41, s. 46942-46952
-
Tidskriftsartikel (refereegranskat)abstract
- For PbS quantum dot (QD)-based optoelectronic devices, gold is the most frequently used electrode material. In most device architectures, gold is in direct contact with the QD solid. To better understand the formation of the interface between gold and a close-packed QD layer at an early stage, in situ grazing-incidence small-angle X-ray scattering is used to observe the gold sputter deposition on a 1,2-ethanedithiol (EDT)-treated PbS QD solid. In the kinetics of gold layer growth, the forming and merging of small gold clusters (radius less than 1.6 nm) are observed at the early stages. The thereby formed medium gold clusters (radius between 1.9-2.4 nm) are influenced by the QDs' templating effect. Furthermore, simulations suggest that the medium gold clusters grow preferably along the QDs' boundaries rather than as a top coating of the QDs. When the thickness of the sputtered gold layer reaches 6.25 nm, larger gold clusters with a radius of 5.3 nm form. Simultaneously, a percolation layer with a thickness of 2.5 nm is established underneath the gold clusters. This fundamental understanding of the QD-gold interface formation will help to control the implementation of sputtered gold electrodes on close-packed QD solids in device manufacturing processes.
|
|
| 16. |
- Chen, W., et al.
(författare)
-
Operando structure degradation study of PbS quantum dot solar cells
- 2021
-
Ingår i: Energy & Environmental Science. - : Royal Society of Chemistry (RSC). - 1754-5692 .- 1754-5706. ; 14:6, s. 3420-3429
-
Tidskriftsartikel (refereegranskat)abstract
- PbS quantum dot (QD) solar cells demonstrate great potential in solar energy conversion with a broad and flexible spectral response. Even though long-term storage stabilities of QD solar cells were reported in literature, the operation stability from a more practical aspect, to date, has been not yet investigated. Herein, we observe the structure degradation process of a PbS QD-ink based solar cell during the device operation. Simultaneously to probing the solar cell parameters, the overall structure evolutions of the QDs in both, active layer and hole transport layer of the solar cell are studied with grazing-incidence small- and wide-angle X-ray scattering (GISAXS/GIWAXS). We find a spontaneous decrease of the QD inter-dot distance with an increase in the spatial disorder in the active layer (PbX2-PbS QDs, X = I, and Br) during the operation induced degradation. Consequently, the structure disorder-induced broadening of the energy state distribution is responsible for the decrease in open-circuit voltageVocleading to the device degradation. These findings elucidate the origin of light-soaking as well as the structure degradation of QD ink-based solar cells and indicate that the stability of the device can be realized by the positional stabilization of the QDs in the QD solid.
|
|
| 17. |
- Gensch, Marc, et al.
(författare)
-
Selective Silver Nanocluster Metallization on Conjugated Diblock Copolymer Templates for Sensing and Photovoltaic Applications
- 2021
-
Ingår i: ACS Applied Nano Materials. - : American Chemical Society (ACS). - 2574-0970. ; 4:4, s. 4245-4255
-
Tidskriftsartikel (refereegranskat)abstract
- Polymer-metal composite films with nanostructured metal and/or polymer interfaces show a significant perspective for optoelectronic applications, for example, as sensors or in organic photovoltaics (OPVs). The polymer components used in these devices are mostly nanostructured conductive polymers with conjugated pi-electron systems. Enhanced OPV's power conversion efficiencies or sensor sensitivity can be achieved by selective metal deposition on or into polymer templates. In this study, we exploit time-resolved grazing-incidence X-ray scattering to observe the metal-polymer interface formation and the cluster crystallite size in situ during silver (Ag) sputter deposition on a poly(3-hexylthiophene-2,5-diyl)-b-poly(methyl methacrylate) (PMMA-b-P3HT) template. We compare the arising nanoscale morphologies with electronic properties, determine Ag growth regimes, and quantify the selective Ag growth for the diblock copolymer (DBC) template using the corresponding homopolymer thin films (P3HT and PMMA) as a reference. Hence, we are able to describe the influence of the respective polymer blocks and substrate effects on the Ag cluster percolation: the percolation threshold is correlated with the insulator-to-metal transition measured in situ with resistance measurements during the sputter deposition. The Ag cluster percolation on PMMA-b-P3HT starts already on the network of the hexagonal P3HT domain before a complete metal film covers the polymer surface, which is complemented by microscopic measurements. In general, this study demonstrates a possible method for the selective Ag growth as a scaffold for electrode preparation in nanoelectronics and for energy harvesting applications.
|
|
| 18. |
- Kreuzer, M., et al.
(författare)
-
Multidisciplinary European Low Dose Initiative (MELODI) : strategic research agenda for low dose radiation risk research
- 2018
-
Ingår i: Radiation and Environmental Biophysics. - : Springer Science and Business Media LLC. - 0301-634X .- 1432-2099. ; 57:1, s. 5-15
-
Forskningsöversikt (refereegranskat)abstract
- MELODI (Multidisciplinary European Low Dose Initiative) is a European radiation protection research platform with focus on research on health risks after exposure to low-dose ionising radiation. It was founded in 2010 and currently includes 44 members from 18 countries. A major activity of MELODI is the continuous development of a long-term European Strategic Research Agenda (SRA) on low-dose risk for radiation protection. The SRA is intended to identify priorities for national and European radiation protection research programs as a basis for the preparation of competitive calls at the European level. Among those key priorities is the improvement of health risk estimates for exposures close to the dose limits for workers and to reference levels for the population in emergency situations. Another activity of MELODI is to ensure the availability of European key infrastructures for research activities, and the long-term maintenance of competences in radiation research via an integrated European approach for training and education. The MELODI SRA identifies three key research topics in low dose or low dose-rate radiation risk research: (1) dose and dose rate dependence of cancer risk, (2) radiation-induced non-cancer effects and (3) individual radiation sensitivity. The research required to improve the evidence base for each of the three key topics relates to three research lines: (1) research to improve understanding of the mechanisms contributing to radiogenic diseases, (2) epidemiological research to improve health risk evaluation of radiation exposure and (3) research to address the effects and risks associated with internal exposures, differing radiation qualities and inhomogeneous exposures. The full SRA and associated documents can be downloaded from the MELODI website (http://www.melodi-online.eu/sra.html).
|
|
| 19. |
|
|
| 20. |
|
|
| 21. |
|
|
