| 1. |
|
|
| 2. |
- Drlica-Wagner, A., et al.
(författare)
-
SEARCH FOR GAMMA-RAY EMISSION FROM DES DWARF SPHEROIDAL GALAXY CANDIDATES WITH FERMI-LAT DATA
- 2015
-
Ingår i: Astrophysical Journal Letters. - 2041-8205 .- 2041-8213. ; 809:1
-
Tidskriftsartikel (refereegranskat)abstract
- Due to their proximity, high dark-matter (DM) content, and apparent absence of non-thermal processes, Milky Way dwarf spheroidal satellite galaxies (dSphs) are excellent targets for the indirect detection of DM. Recently, eight new dSph candidates were discovered using the first year of data from the Dark Energy Survey (DES). We searched for gamma-ray emission coincident with the positions of these new objects in six years of Fermi Large Area Telescope data. We found no significant excesses of gamma-ray emission. Under the assumption that the DES candidates are dSphs with DM halo properties similar to the known dSphs, we computed individual and combined limits on the velocity-averaged DM annihilation cross section for these new targets. If the estimated DM content of these dSph candidates is confirmed, they will constrain the annihilation cross section to lie below the thermal relic cross section for DM particles with masses less than or similar to 20 GeV annihilating via the b (b) over bar or pi(+)pi(-) channels.
|
|
| 3. |
- Engstrand, J., et al.
(författare)
-
Liver resection and ablation for squamous cell carcinoma liver metastases
- 2021
-
Ingår i: BJS Open. - Oxford, United Kingdom : Oxford University Press. - 2474-9842. ; 5:4
-
Tidskriftsartikel (refereegranskat)abstract
- BACKGROUND: Limited evidence exists to guide the management of patients with liver metastases from squamous cell carcinoma (SCC). The aim of this retrospective multicentre cohort study was to describe patterns of disease recurrence after liver resection/ablation for SCC liver metastases and factors associated with recurrence-free survival (RFS) and overall survival (OS).METHOD: Members of the European-African Hepato-Pancreato-Biliary Association were invited to include all consecutive patients undergoing liver resection/ablation for SCC liver metastases between 2002 and 2019. Patient, tumour and perioperative characteristics were analysed with regard to RFS and OS.RESULTS: Among the 102 patients included from 24 European centres, 56 patients had anal cancer, and 46 patients had SCC from other origin. RFS in patients with anal cancer and non-anal cancer was 16 and 9 months, respectively (P = 0.134). A positive resection margin significantly influenced RFS for both anal cancer and non-anal cancer liver metastases (hazard ratio 6.82, 95 per cent c.i. 2.40 to 19.35, for the entire cohort). Median survival duration and 5-year OS rate among patients with anal cancer and non-anal cancer were 50 months and 45 per cent and 21 months and 25 per cent, respectively. For the entire cohort, only non-radical resection was associated with worse overall survival (hazard ratio 3.21, 95 per cent c.i. 1.24 to 8.30).CONCLUSION: Liver resection/ablation of liver metastases from SCC can result in long-term survival. Survival was superior in treated patients with liver metastases from anal versus non-anal cancer. A negative resection margin is paramount for acceptable outcome.
|
|
| 4. |
|
|
| 5. |
|
|
| 6. |
- Bremer, Kåre, et al.
(författare)
-
An ordinal classification for the families of flowering plants
- 1998
-
Ingår i: ANNALS OF THE MISSOURI BOTANICAL GARDEN. - : MISSOURI BOTANICAL GARDEN. - 0026-6493. ; 85:4, s. 531-553
-
Tidskriftsartikel (övrigt vetenskapligt/konstnärligt)abstract
- Recent cladistic analyses are revealing the phylogeny of flowering plants in increasing detail, and there is support for the monophyly of many major groups above the family level. With many elements of the major branching sequence of phylogeny established
|
|
| 7. |
|
|
| 8. |
- Brown, Sally, et al.
(författare)
-
Shifting perspectives on coastal impacts and adaptation
- 2014
-
Ingår i: Nature Climate Change. - : Nature Publishing Group. - 1758-678X .- 1758-6798. ; 4:9, s. 752-755
-
Tidskriftsartikel (övrigt vetenskapligt/konstnärligt)abstract
- The Intergovernmental Panel on Climate Change reports reflect evolving attitudes in adapting to sea-level rise by taking a systems approach and recognizing that multiple responses exist to achieve a less hazardous coast.
|
|
| 9. |
- D'Souza, Melroy A., et al.
(författare)
-
Hepatopancreatoduodenectomy –a controversial treatment for bile duct and gallbladder cancer from a European perspective
- 2020
-
Ingår i: HPB. - : Elsevier BV. - 1365-182X. ; 22:9, s. 1339-1348
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Hepatopancreatoduodenectomy (HPD) is an aggressive operation for treatment of advanced bile duct and gallbladder cancer associated with high perioperative morbidity and mortality, and uncertain oncological benefit in terms of survival. Few reports on HPD from Western centers exist. The purpose of this study was to evaluate safety and efficacy for HPD in European centers. Method: Members of the European-African HepatoPancreatoBiliary Association were invited to report all consecutive patients operated with HPD for bile duct or gallbladder cancer between January 2003 and January 2018. The patient and tumor characteristics, perioperative and survival outcomes were analyzed. Results: In total, 66 patients from 19 European centers were included in the analysis. 90-day mortality rate was 17% and 13% for bile duct and gallbladder cancer respectively. All factors predictive of perioperative mortality were patient and disease-specific. The three-year overall survival excluding 90-day mortality was 80% for bile duct and 30% for gallbladder cancer (P = 0.013). In multivariable analysis R0-resection had a significant impact on overall survival. Conclusion: HPD, although being associated with substantial perioperative mortality, can offer a survival benefit in patient subgroups with bile duct cancer and gallbladder cancer. To achieve negative resection margins is paramount for an improved survival outcome.
|
|
| 10. |
- Kron, J., et al.
(författare)
-
Comparison of numerical simulation models for predicting temperature in solidification analysis with reference to air gap formation
- 2004
-
Ingår i: International Journal of Cast Metals Research. - : Maney Publishing. - 1364-0461 .- 1743-1336. ; 17:5, s. 295-310
-
Tidskriftsartikel (refereegranskat)abstract
- As a result of its influence on heat transfer between cast part and mould, air gap formation is an important problem for many casting processes. The general explanation for gap formation is that, as a result of stresses and distortions that are created from inhomogeneous cooling, shrinkage of the casting and expansion of the mould occur. In this paper, different thermomechanical approaches are applied to a well defined casting process using three commercial and one in-house codes and their predictions are compared with experimental findings. The experimental data were obtained from the solidification and subsequent cooling of cylindrical castings of eutectic Al-13% Si and ternary Al-7% Si-0.3% Mg alloys. Based on these findings, the major differences between the predictions of the models and the actual formation of the air gap are discussed.
|
|
| 11. |
|
|
| 12. |
|
|
| 13. |
- Myadam, Rahul, et al.
(författare)
-
Risk of Adverse Outcomes Associated With Cardiac Sarcoidosis Diagnostic Schemes
- 2023
-
Ingår i: JACC: Clinical Electrophysiology. - 2405-500X. ; 9:8, s. 1719-1729
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Multiple cardiac sarcoidosis (CS) diagnostic schemes have been published. Objectives: This study aims to evaluate the association of different CS diagnostic schemes with adverse outcomes. The diagnostic schemes evaluated were 1993, 2006, and 2017 Japanese criteria and the 2014 Heart Rhythm Society criteria. Methods: Data were collected from the Cardiac Sarcoidosis Consortium, an international registry of CS patients. Outcome events were any of the following: all-cause mortality, left ventricular assist device placement, heart transplantation, and appropriate implantable cardioverter-defibrillator therapy. Logistic regression analysis evaluated the association of outcomes with each CS diagnostic scheme. Results: A total of 587 subjects met the following criteria: 1993 Japanese (n = 310, 52.8%), 2006 Japanese (n = 312, 53.2%), 2014 Heart Rhythm Society (n = 480, 81.8%), and 2017 Japanese (n = 112, 19.1%). Patients who met the 1993 criteria were more likely to experience an event than patients who did not (n = 109 of 310, 35.2% vs n = 59 of 277, 21.3%; OR: 2.00; 95% CI: 1.38-2.90; P < 0.001). Similarly, patients who met the 2006 criteria were more likely to have an event than patients who did not (n = 116 of 312, 37.2% vs n = 52 of 275, 18.9%; OR: 2.54; 95% CI: 1.74-3.71; P < 0.001). There was no statistically significant association between the occurrence of an event and whether a patient met the 2014 or the 2017 criteria (OR: 1.39; 95% CI: 0.85-2.27; P = 0.18 or OR: 1.51; 95% CI: 0.97-2.33; P = 0.067, respectively). Conclusions: CS patients who met the 1993 and the 2006 criteria had higher odds of adverse clinical outcomes. Future research is needed to prospectively evaluate existing diagnostic schemes and develop new risk models for this complex disease.
|
|
| 14. |
- Schulman, H., et al.
(författare)
-
Sedimentation rate and suPAR in relation to disease activity and mortality in patients with tuberculosis
- 2019
-
Ingår i: The International Journal of Tuberculosis and Lung Disease. - : INT UNION AGAINST TUBERCULOSIS LUNG DISEASE (I U A T L D). - 1027-3719 .- 1815-7920. ; 23:11, s. 1155-1161
-
Tidskriftsartikel (refereegranskat)abstract
- OBJECTIVE : To investigate how levels of the soluble urokinase plasminogen activator receptor (suPAR) and erythrocyte sedimentation rate (ESR) correlate with disease activity and prognosis in pulmonary tuberculosis (PTB). DESIGN: This was a retrospective analysis of patients with active PTB (n = 500) in Gondar, Ethiopia, for whom the suPAR (n = 301) and ESR (n = 330) were analysed at the start of treatment. Both biomarkers were available for 176 patients. Human immunodeficiency virus (HIV) status, chest X-ray (CXR) findings, classification according to the clinical TBscore and treatment outcome were all recorded. RESULTS : In a multivariable logistic regression analysis adjusted for age, sex and HIV status, surrogate markers of disease activity such as advanced CXR patterns correlated with increased levels of suPAR (adjusted OR [aOR] 8.24, Pamp;lt; 0.001) and of ESR (aOR 1.63, P = 0.030), whereas ESR only correlated significantly with a TBscore amp;gt;6 points. Increased levels of both suPAR and ESR were associated with unsuccessful treatment outcomes (aOR 2.93, P = 0.013; aOR 2.52, P = 0.025). The highest quartile of suPAR (aOR 13.3, P = 0.029) but not ESR levels correlated independently with increased mortality. CONCLUSION: SuPAR and ESR levels correlate with disease activity in PTB; however, the clinical role of these potentially prognostic biomarkers needs to be verified in prospective studies.
|
|
| 15. |
- Baldoc, C, et al.
(författare)
-
Dose resolution in radiotherapy polymer gel dosimetry: effect of echo spacing in MRI pulse sequence
- 2001
-
Ingår i: Physics in Medicine and Biology. - : IOP Publishing. - 1361-6560 .- 0031-9155. ; 46:2, s. 449-460
-
Tidskriftsartikel (refereegranskat)abstract
- In polymer gel dosimetry using magnetic resonance imaging, the uncertainty in absorbed dose is dependent on the experimental determination of T2. The concept of dose resolution (Dpdelta) of polymer gel dosimeters is developed and applied to the uncertainty in dose related to the uncertainty in T2 from a range of T4 encountered in polymer gel dosimetry. Dpdelta is defined as the minimal separation between two absorbed doses such that they may be distinguished with a given level of confidence, p. The minimum detectable dose (MDD) is Dpdelta as the dose approaches zero. Dpdelta and the minimum detectable dose both give a quantifiable indication of the likely practical limitations and usefulness of the dosimeter. Dpdelta of a polyacrylamide polymer gel dosimeter is presented for customized 32-echo and standard multiple-spin-echo sequences on a clinical MRI scanner. In evaluating uncertainties in T2, a parameter of particular significance in the pulse sequence is the echo spacing (ES). For optimal results, ES should be selected to minimize Dpdelta over a range of doses of interest in polymer gel dosimetry.
|
|
| 16. |
- Fredriksson, Hasse, et al.
(författare)
-
Theory of hot crack formation
- 2005
-
Ingår i: Materials Science and Technology. - : Informa UK Limited. - 0267-0836 .- 1743-2847. ; 21:5, s. 521-529
-
Tidskriftsartikel (refereegranskat)abstract
- The hot crack sensitivity in metals is suggested to be caused by the supersaturation of vacancies created during the solidification process. Equations have been derived to predict the nucleation and growth of cracks by the condensation of vacancies. The transition temperature from brittle to ductile fracture was found to be related to the decrease in the supersaturation of vacancies due to an annealing process. The hot crack sensitivity was observed to be related to the supersaturation of vacancies, the diffusion rate, and the structure coarseness. The effect of surface active elements such as phosphorous and sulphur in steel alloys is discussed.
|
|
| 17. |
|
|
| 18. |
|
|
| 19. |
- Kron, J., et al.
(författare)
-
Air gap formation during solidification in cylindrical castings of pure aluminium and eutectic Al-Si
- 2002
-
Ingår i: International Journal of Cast Metals Research. - : Informa UK Limited. - 1364-0461 .- 1743-1336. ; 14:5, s. 275-285
-
Tidskriftsartikel (refereegranskat)abstract
- Casting of aluminium and eutectic Al-Si in a cylindrical mould has been performed. The air gap formed between the inner mould wall and the solidified shell was measured throughout the solidification process. Simultaneously the temperature distribution in the metal and the mould was measured. Calculations of the shrinkage of the metal were performed. The shrinkage due to thermal contraction was found to be too small to fit the measurements. A new model for the solidification process and the air gap formation was used, where the effect of the formation and condensation of lattice defects was considered. The condensation of lattice defects was used to explain the shrinkage and the air gap found experimentally.
|
|
| 20. |
|
|
| 21. |
- Kron, J., et al.
(författare)
-
Measurements and modelling of air gap formation in aluminium based alloys
- 2005
-
Ingår i: International Journal of Cast Metals Research. - : Maney Publishing. - 1364-0461 .- 1743-1336. ; 18:1, s. 29-40
-
Tidskriftsartikel (refereegranskat)abstract
- The formation of an air gap has been experimentally studied during solidification of several aluminium based alloys. Air gap widths and temperature distribution have been measured during solidification in a cylindrical mould. The effect of grain refinement on heat transfer and air gap formation has been studied. Mathematical modelling has been performed to increase the understanding of the solidification process and air gap formation. A model was developed for description of air gap formation in alloys solidifying with varying solidification intervals. The model includes the effect of formation and condensation of lattice defects on the solidification process and air gap formation. The calculated shrinkage using this model shows good agreement with the experimental data.
|
|
| 22. |
- Kron, J., et al.
(författare)
-
Measurements and modelling of air gap formation in Cu-based alloys
- 2005
-
Ingår i: International Journal of Cast Metals Research. - : Maney Publishing. - 1364-0461 .- 1743-1336. ; 18:1, s. 21-28
-
Tidskriftsartikel (refereegranskat)abstract
- The formation of an air gap has been experimentally studied during solidification of pure Cu, Cu-Te and Cu-6%Sn in a cylindrical mould. The displacements of the casting and the mould causing an air gap have been measured during solidification and cooling of the casting. The temperature distribution was measured simultaneously. Mathematical modelling has been performed to increase the understanding of the solidification process and the shrinkage of the casting leading to air gap formation. A model, which has been tested in earlier work showing good results for aluminium based alloys, has been applied here to describe air gap formation during solidification of copper based alloys. The model includes the effect of the formation and condensation of vacancies on the solidification process as well as on the material shrinkage resulting in air gap formation. The results from the modelling show a reasonable agreement with the experimental measurements.
|
|
| 23. |
- Linder, Jan, et al.
(författare)
-
The influence of porosity on the fatigue strength of high-pressure die cast aluminium
- 2006
-
Ingår i: Fatigue & Fracture of Engineering Materials & Structures. - : Wiley. - 8756-758X .- 1460-2695. ; 29:5, s. 357-363
-
Tidskriftsartikel (refereegranskat)abstract
- Aluminium is a lightweight material with high strength and good corrosion resistance among other beneficial properties. Thanks to these properties, aluminium is more extensively used in the vehicle industry. High-pressure die casting of aluminium is a manufacturing process that makes it possible to attain complex, multi-functional components with near-net shape. However, there is one disadvantage of such castings, that is, the presence of various defects such as porosity and its effect on mechanical properties. The aim of this work was to investigate the influence of porosity on the fatigue strength of high-pressure die cast aluminium. The objective was to derive the influence of defect size with respect to the fatigue load, and to generate a model for fatigue life in terms of a Kitagawa diagram. The aluminium alloy used in this study is comparable to AlSi9Cu3. Specimens were examined in X-ray prior to fatigue loading and classified with respect to porosity level and eventually fatigue tested in bending at the load ratio, R, equal to -1. Two different specimen types with a stress concentration factor of 1.05 and 2.25 have been tested. It has been shown that the fatigue strength decreases by up to 25% as the amount of porosity of the specimen is increased. The results further showed that the influence of defects was less for the specimen type with the higher stress concentration. This is believed to be an effect of a smaller volume being exposed to the maximum stress for this specimen type. A Kitagawa diagram was constructed on the basis of the test results and fracture mechanics calculations. A value of 1.4 Mpa m(1/2) was used for the so-called stress intensity threshold range. This analysis predicts that defects larger than 0.06 mm(2) will reduce the fatigue strength at 5 x 10(6) cycles for the aluminium AlSi9Cu3 material tested.
|
|
| 24. |
- Sukuru, Sai Chetan K, et al.
(författare)
-
Discovering new classes of Brugia malayi asparaginyl-tRNA synthetase inhibitors and relating specificity to conformational change.
- 2006
-
Ingår i: Journal of computer-aided molecular design. - : Springer Science and Business Media LLC. - 0920-654X .- 1573-4951. ; 20:3, s. 159-78
-
Tidskriftsartikel (refereegranskat)abstract
- SLIDE software, which models the flexibility of protein and ligand side chains while docking, was used to screen several large databases to identify inhibitors of Brugia malayi asparaginyl-tRNA synthetase (AsnRS), a target for anti-parasitic drug design. Seven classes of compounds identified by SLIDE were confirmed as micromolar inhibitors of the enzyme. Analogs of one of these classes of inhibitors, the long side-chain variolins, cannot bind to the adenosyl pocket of the closed conformation of AsnRS due to steric clashes, though the short side-chain variolins identified by SLIDE apparently bind isosterically with adenosine. We hypothesized that an open conformation of the motif 2 loop also permits the long side-chain variolins to bind in the adenosine pocket and that their selectivity for Brugia relative to human AsnRS can be explained by differences in the sequence and conformation of this loop. Loop flexibility sampling using Rigidity Optimized Conformational Kinetics (ROCK) confirms this possibility, while scoring of the relative affinities of the different ligands by SLIDE correlates well with the compounds' ranks in inhibition assays. Combining ROCK and SLIDE provides a promising approach for exploiting conformational flexibility in structure-based screening and design of species selective inhibitors.
|
|
