| 1. |
- Adolfsson, Daniel, 1992-, et al.
(författare)
-
TBV Radar SLAM - Trust but Verify Loop Candidates
- 2023
-
Ingår i: IEEE Robotics and Automation Letters. - : IEEE. - 2377-3766. ; 8:6, s. 3613-3620
-
Tidskriftsartikel (refereegranskat)abstract
- Robust SLAM in large-scale environments requires fault resilience and awareness at multiple stages, from sensing and odometry estimation to loop closure. In this work, we present TBV (Trust But Verify) Radar SLAM, a method for radar SLAM that introspectively verifies loop closure candidates. TBV Radar SLAM achieves a high correct-loop-retrieval rate by combining multiple place-recognition techniques: tightly coupled place similarity and odometry uncertainty search, creating loop descriptors from origin-shifted scans, and delaying loop selection until after verification. Robustness to false constraints is achieved by carefully verifying and selecting the most likely ones from multiple loop constraints. Importantly, the verification and selection are carried out after registration when additional sources of loop evidence can easily be computed. We integrate our loop retrieval and verification method with a robust odometry pipeline within a pose graph framework. By evaluation on public benchmarks we found that TBV Radar SLAM achieves 65% lower error than the previous state of the art. We also show that it generalizes across environments without needing to change any parameters. We provide the open-source implementation at https://github.com/dan11003/tbv_slam_public
|
|
| 2. |
- Hilger, Maximilian, 1998-, et al.
(författare)
-
Towards introspective loop closure in 4D radar SLAM
- 2024
-
Konferensbidrag (refereegranskat)abstract
- Imaging radar is an emerging sensor modality in the context of Localization and Mapping (SLAM), especially suitable for vision-obstructed environments. This article investigates the use of 4D imaging radars for SLAM and analyzes the challenges in robust loop closure. Previous work indicates that 4D radars, together with inertial measurements, offer ample information for accurate odometry estimation. However, the low field of view, limited resolution, and sparse and noisy measurements render loop closure a significantly more challenging problem. Our work builds on the previous work - TBV SLAM - which was proposed for robust loop closure with 360∘ spinning radars. This article highlights and addresses challenges inherited from a directional 4D radar, such as sparsity, noise, and reduced field of view, and discusses why the common definition of a loop closure is unsuitable. By combining multiple quality measures for accurate loop closure detection adapted to 4D radar data, significant results in trajectory estimation are achieved; the absolute trajectory error is as low as 0.46 m over a distance of 1.8 km, with consistent operation over multiple environments.
|
|
| 3. |
- Vaidis, Maxime, et al.
(författare)
-
Extrinsic calibration for highly accurate trajectories reconstruction
- 2023
-
Ingår i: 2023 IEEE International Conference on Robotics and Automation (ICRA). - : IEEE. - 9798350323658 - 9798350323665 ; , s. 4185-4192
-
Konferensbidrag (refereegranskat)abstract
- In the context of robotics, accurate ground-truth positioning is the cornerstone for the development of mapping and localization algorithms. In outdoor environments and over long distances, total stations provide accurate and precise measurements, that are unaffected by the usual factors that deteriorate the accuracy of Global Navigation Satellite System (GNSS). While a single robotic total station can track the position of a target in three Degrees Of Freedom (DOF), three robotic total stations and three targets are necessary to yield the full six DOF pose reference. Since it is crucial to express the position of targets in a common coordinate frame, we present a novel extrinsic calibration method of multiple robotic total stations with field deployment in mind. The proposed method does not require the manual collection of ground control points during the system setup, nor does it require tedious synchronous measurement on each robotic total station. Based on extensive experimental work, we compare our approach to the classical extrinsic calibration methods used in geomatics for surveying and demonstrate that our approach brings substantial time savings during the deployment. Tested on more than 30 km of trajectories, our new method increases the precision of the extrinsic calibration by 25 % compared to the best state-of-the-art method, which is the one taking manually static ground control points.
|
|
