| 1. |
|
|
| 2. |
|
|
| 3. |
|
|
| 4. |
- Tran, K. B., et al.
(författare)
-
The global burden of cancer attributable to risk factors, 2010-19: a systematic analysis for the Global Burden of Disease Study 2019
- 2022
-
Ingår i: Lancet. - 0140-6736. ; 400:10352, s. 563-591
-
Tidskriftsartikel (refereegranskat)abstract
- Background Understanding the magnitude of cancer burden attributable to potentially modifiable risk factors is crucial for development of effective prevention and mitigation strategies. We analysed results from the Global Burden of Diseases, Injuries, and Risk Factors Study (GBD) 2019 to inform cancer control planning efforts globally. Methods The GBD 2019 comparative risk assessment framework was used to estimate cancer burden attributable to behavioural, environmental and occupational, and metabolic risk factors. A total of 82 risk-outcome pairs were included on the basis of the World Cancer Research Fund criteria. Estimated cancer deaths and disability-adjusted life-years (DALYs) in 2019 and change in these measures between 2010 and 2019 are presented. Findings Globally, in 2019, the risk factors included in this analysis accounted for 4.45 million (95% uncertainty interval 4.01-4.94) deaths and 105 million (95.0-116) DALYs for both sexes combined, representing 44.4% (41.3-48.4) of all cancer deaths and 42.0% (39.1-45.6) of all DALYs. There were 2.88 million (2.60-3.18) risk-attributable cancer deaths in males (50.6% [47.8-54.1] of all male cancer deaths) and 1.58 million (1.36-1.84) risk-attributable cancer deaths in females (36.3% [32.5-41.3] of all female cancer deaths). The leading risk factors at the most detailed level globally for risk-attributable cancer deaths and DALYs in 2019 for both sexes combined were smoking, followed by alcohol use and high BMI. Risk-attributable cancer burden varied by world region and Socio-demographic Index (SDI), with smoking, unsafe sex, and alcohol use being the three leading risk factors for risk-attributable cancer DALYs in low SDI locations in 2019, whereas DALYs in high SDI locations mirrored the top three global risk factor rankings. From 2010 to 2019, global risk-attributable cancer deaths increased by 20.4% (12.6-28.4) and DALYs by 16.8% (8.8-25.0), with the greatest percentage increase in metabolic risks (34.7% [27.9-42.8] and 33.3% [25.8-42.0]). Interpretation The leading risk factors contributing to global cancer burden in 2019 were behavioural, whereas metabolic risk factors saw the largest increases between 2010 and 2019. Reducing exposure to these modifiable risk factors would decrease cancer mortality and DALY rates worldwide, and policies should be tailored appropriately to local cancer risk factor burden. Copyright (C) 2022 The Author(s). Published by Elsevier Ltd. This is an Open Access article under the CC BY 4.0 license.
|
|
| 5. |
|
|
| 6. |
|
|
| 7. |
- Bouyoucef, S E, et al.
(författare)
-
Poster Session 2 : Monday 4 May 2015, 08
- 2015
-
Ingår i: European Heart Journal Cardiovascular Imaging. - : Oxford University Press (OUP). - 2047-2404 .- 2047-2412. ; 16 Suppl 1
-
Tidskriftsartikel (refereegranskat)
|
|
| 8. |
|
|
| 9. |
|
|
| 10. |
- Ferreira, Mjv, et al.
(författare)
-
Poster Session 3 : Tuesday 5 May 2015, 08
- 2015
-
Ingår i: European Heart Journal Cardiovascular Imaging. - : Oxford University Press (OUP). - 2047-2404 .- 2047-2412. ; 16 Suppl 1
-
Tidskriftsartikel (refereegranskat)
|
|
| 11. |
- Khuyagbaatar, J., et al.
(författare)
-
48Ca+249Bk Fusion Reaction Leading to Element Z=117: Long-Lived α-Decaying 270Db and Discovery of 266Lr
- 2014
-
Ingår i: Physical Review Letters. - 1079-7114. ; 112:17
-
Tidskriftsartikel (refereegranskat)abstract
- The superheavy element with atomic number Z=117 was produced as an evaporation residue in the 48Ca+249Bk fusion reaction at the gas-filled recoil separator TASCA at GSI Darmstadt, Germany. The radioactive decay of evaporation residues and their α-decay products was studied using a detection setup that allowed measuring decays of single atomic nuclei with half-lives between sub-μs and a few days. Two decay chains comprising seven α decays and a spontaneous fission each were identified and are assigned to the isotope 294-117 and its decay products. A hitherto unknown α-decay branch in 270Db (Z=105) was observed, which populated the new isotope 266Lr (Z=103). The identification of the long-lived (T1/2=1.0+1.9−0.4 h) α-emitter 270Db marks an important step towards the observation of even more long-lived nuclei of superheavy elements located on an “island of stability.”
|
|
| 12. |
- Khuyagbaatar, J., et al.
(författare)
-
Fusion reaction 48Ca + 249Bk leading to formation of the element Ts (Z=117)
- 2019
-
Ingår i: Physical Review C. - 2469-9985. ; 99:5
-
Tidskriftsartikel (refereegranskat)abstract
- The heaviest currently known nuclei, which have up to 118 protons, have been produced in 48Ca induced reactions with actinide targets. Among them, the element tennessine (Ts), which has 117 protons, has been synthesized by fusing 48Ca with the radioactive target 249Bk, which has a half-life of 327 d. The experiment was performed at the gas-filled recoil separator TASCA. Two long and two short α decay chains were observed. The long chains were attributed to the decay of 294Ts. The possible origin of the short-decay chains is discussed in comparison with the known experimental data. They are found to fit with the decay chain patterns attributed to 293Ts. The present experimental results confirm the previous findings at the Dubna Gas-Filled Recoil Separator on the decay chains originating from the nuclei assigned to Ts.
|
|
| 13. |
- Khuyagbaatar, J., et al.
(författare)
-
Search for elements 119 and 120
- 2020
-
Ingår i: Physical Review C. - 2469-9985. ; 102:6
-
Tidskriftsartikel (refereegranskat)abstract
- A search for production of the superheavy elements with atomic numbers 119 and 120 was performed in the 50Ti+249Bk and 50Ti+249Cf fusion-evaporation reactions, respectively, at the gas-filled recoil separator TASCA at GSI Darmstadt, Germany. Over four months of irradiation, the 249Bk target partially decayed into 249Cf, which allowed for a simultaneous search for both elements. Neither was detected at cross-section sensitivity levels of 65 and 200 fb for the 50Ti+249Bk and 50Ti+249Cf reactions, respectively, at a midtarget beam energy of Elab = 281.5 MeV. The nonobservation of elements 119 and 120 is discussed within the concept of fusion-evaporation reactions including various theoretical predictions on the fission-barrier heights of superheavy nuclei in the region of the island of stability.
|
|
| 14. |
|
|
| 15. |
|
|
| 16. |
|
|
| 17. |
- Di Nitto, A., et al.
(författare)
-
Study of Non-fusion Products in the 50Ti+249Cf Reaction
- 2018
-
Ingår i: Physics Letters, Section B: Nuclear, Elementary Particle and High-Energy Physics. - : Elsevier BV. - 0370-2693. ; 784, s. 199-205
-
Tidskriftsartikel (refereegranskat)abstract
- The isotopic distribution of nuclei produced in the 50Ti + 249Cf reaction has been studied at the gas-filled recoil separator TASCA at GSI Darmstadt, which separates ions according to differences in magnetic rigidity. The bombardment was performed at an energy around the Bass barrier and with the TASCA magnetic fields set for collecting fusion-evaporation reaction products. Fifty-three isotopes located “north-east” of 208Pb were identified as recoiling products formed in non-fusion channels of the reaction. These recoils were implanted with energies in two distinct ranges; besides one with higher energy, a significant low-energy contribution was identified. The latter observation was not expected to occur according to kinematics of the known types of reactions, namely quasi-elastic, multi-nucleon transfer, deep-inelastic collisions or quasifission. The present observations are discussed within the framework of two-body kinematics passing through the formation of a composite system.
|
|
| 18. |
- Yakushev, A., et al.
(författare)
-
On the adsorption and reactivity of element 114, flerovium
- 2022
-
Ingår i: Frontiers in Chemistry. - : Frontiers Media SA. - 2296-2646. ; 10
-
Tidskriftsartikel (refereegranskat)abstract
- Flerovium (Fl, element 114) is the heaviest element chemically studied so far. To date, its interaction with gold was investigated in two gas-solid chromatography experiments, which reported two different types of interaction, however, each based on the level of a few registered atoms only. Whereas noble-gas-like properties were suggested from the first experiment, the second one pointed at a volatile-metal-like character. Here, we present further experimental data on adsorption studies of Fl on silicon oxide and gold surfaces, accounting for the inhomogeneous nature of the surface, as it was used in the experiment and analyzed as part of the reported studies. We confirm that Fl is highly volatile and the least reactive member of group 14. Our experimental observations suggest that Fl exhibits lower reactivity towards Au than the volatile metal Hg, but higher reactivity than the noble gas Rn.
|
|
| 19. |
- Düllmann, Ch. E., et al.
(författare)
-
Production and Decay of Element 114: High Cross Sections and the New Nucleus 277Hs
- 2010
-
Ingår i: Physical Review Letters. - 1079-7114. ; 104:25
-
Tidskriftsartikel (refereegranskat)abstract
- The fusion-evaporation reaction 244Pu(48Ca, 3-4n)288,289114 was studied at the new gas-filled recoil separator TASCA. Thirteen correlated decay chains were observed and assigned to the production and decay of 288,289114. At a compound nucleus excitation energy of E* = 39.8-43.9 MeV, the 4n evaporation channel cross section was 9.8(-3.1)(+3.9) pb. At E* = 36.1-39.5 MeV, that of the 3n evaporation channel was 8.0-(+7.4)(4.5) pb. In one of the 3n evaporation channel decay chains, a previously unobserved alpha branch in 281Ds was observed ( probability to be of random origin from background: 0.1%). This alpha decay populated the new nucleus 277Hs, which decayed by spontaneous fission after a lifetime of 4.5 ms.
|
|
| 20. |
- Gates, J. M., et al.
(författare)
-
First Superheavy Element Experiments at the GSI Recoil Separator TASCA: The Production and Decay of Element 114 in the 244Pu(48Ca,3-4n) Reaction
- 2011
-
Ingår i: Physical Review C (Nuclear Physics). - 0556-2813. ; 83:5
-
Tidskriftsartikel (refereegranskat)abstract
- Experiments with the new recoil separator, Transactinide Separator and Chemistry Apparatus (TASCA), at the GSI were performed by using beams of Ca-48 to irradiate targets of Pb206-208, which led to the production of No252-254 isotopes. These studies allowed for evaluation of the performance of TASCA when coupled to a new detector and electronics system. By following these studies, the isotopes of element 114 ((288-291)114) were produced in irradiations of Pu-244 targets with Ca-48 beams at compound nucleus excitation energies around 41.7 and 37.5 MeV, demonstrating TASCA's ability to perform experiments with picobarn-level cross sections. A total of 15 decay chains were observed and were assigned to the decay of 288-291114. A new a-decay branch in (281)Ds was observed, leading to the new nucleus (277)Hs.
|
|
| 21. |
- Khuyagbaatar, J., et al.
(författare)
-
Study of the Average Charge States of 188Pb and 252,254No Ions at the Gas-filled Separator TASCA
- 2012
-
Ingår i: Nuclear Instruments & Methods in Physics Research. Section A: Accelerators, Spectrometers, Detectors, and Associated Equipment. - : Elsevier BV. - 0167-5087 .- 0168-9002. ; 689, s. 40-46
-
Tidskriftsartikel (refereegranskat)abstract
- The average charge states of Pb-188 and No-252,No-254 ions in dilute helium gas were measured at the gas-filled recoil separator TASCA. Hydrogen gas was also used as a filling gas for measurements of the average charge state of No-254. Helium and hydrogen gases at pressures from 0.2 mbar to 2.0 mbar were used. A strong dependence of the average charge state on the pressure of the filling gases was observed for both, helium and hydrogen. The influence of this dependence, classically attributed to the so-called "density effect", on the performance of TASCA was investigated. The average charge states of No-254 ions were also measured in mixtures of helium and hydrogen gases at low gas pressures around 1.0 mbar. From the experimental results simple expressions for the prediction of average charge states of heavy ions moving in rarefied helium gas, hydrogen gas, and in their mixture were derived. (C) 2012 Elsevier B.V. All rights reserved.
|
|
| 22. |
- Attia, Zachi I., et al.
(författare)
-
Rapid Exclusion of COVID Infection With the Artificial Intelligence Electrocardiogram
- 2021
-
Ingår i: Mayo Clinic proceedings. - : ELSEVIER SCIENCE INC. - 0025-6196 .- 1942-5546. ; 96:8, s. 2081-2094
-
Tidskriftsartikel (refereegranskat)abstract
- Objective: To rapidly exclude severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infection using artificial intelligence applied to the electrocardiogram (ECG). Methods: A global, volunteer consortium from 4 continents identified patients with ECGs obtained around the time of polymerase chain reaction-confirmed COVID-19 diagnosis and age- and sex-matched controls from the same sites. Clinical characteristics, polymerase chain reaction results, and raw electrocardiographic data were collected. A convolutional neural network was trained using 26,153 ECGs (33.2% COVID positive), validated with 3826 ECGs (33.3% positive), and tested on 7870 ECGs not included in other sets (32.7% positive). Performance under different prevalence values was tested by adding control ECGs from a single high-volume site. Results: The area under the curve for detection of acute COVID-19 infection in the test group was 0.767 (95% CI, 0.756 to 0.778; sensitivity, 98%; specificity, 10%; positive predictive value, 37%; negative predictive value, 91%). To more accurately reflect a real-world population, 50,905 normal controls were added to adjust the COVID prevalence to approximately 5% (2657/58,555), resulting in an area under the curve of 0.780 (95% CI, 0.771 to 0.790) with a specificity of 12.1% and a negative predictive value of 99.2%. Conclusion: Infection with SARS-CoV-2 results in electrocardiographic changes that permit the artificial intelligence-enhanced ECG to be used as a rapid screening test with a high negative predictive value (99.2%). This may permit the development of electrocardiography-based tools to rapidly screen individuals for pandemic control. (C) 2021 Mayo Foundation Medical Education and Research
|
|
| 23. |
- Korecka, A, et al.
(författare)
-
Bidirectional communication between the Aryl hydrocarbon Receptor (AhR) and the microbiome tunes host metabolism
- 2016
-
Ingår i: NPJ biofilms and microbiomes. - : Springer Science and Business Media LLC. - 2055-5008. ; 2, s. 16014-
-
Tidskriftsartikel (refereegranskat)abstract
- The ligand-induced transcription factor, aryl hydrocarbon receptor (AhR) is known for its capacity to tune adaptive immunity and xenobiotic metabolism—biological properties subject to regulation by the indigenous microbiome. The objective of this study was to probe the postulated microbiome-AhR crosstalk and whether such an axis could influence metabolic homeostasis of the host. Utilising a systems-biology approach combining in-depth 1H-NMR-based metabonomics (plasma, liver and skeletal muscle) with microbiome profiling (small intestine, colon and faeces) of AhR knockout (AhR−/−) and wild-type (AhR+/+) mice, we assessed AhR function in host metabolism. Microbiome metabolites such as short-chain fatty acids were found to regulate AhR and its target genes in liver and intestine. The AhR signalling pathway, in turn, was able to influence microbiome composition in the small intestine as evident from microbiota profiling of the AhR+/+ and AhR−/− mice fed with diet enriched with a specific AhR ligand or diet depleted of any known AhR ligands. The AhR−/− mice also displayed increased levels of corticosterol and alanine in serum. In addition, activation of gluconeogenic genes in the AhR−/− mice was indicative of on-going metabolic stress. Reduced levels of ketone bodies and reduced expression of genes involved in fatty acid metabolism in the liver further underscored this observation. Interestingly, exposing AhR−/− mice to a high-fat diet showed resilience to glucose intolerance. Our data suggest the existence of a bidirectional AhR-microbiome axis, which influences host metabolic pathways.
|
|
| 24. |
|
|
| 25. |
- D'Souza, Melroy A., et al.
(författare)
-
Hepatopancreatoduodenectomy –a controversial treatment for bile duct and gallbladder cancer from a European perspective
- 2020
-
Ingår i: HPB. - : Elsevier BV. - 1365-182X. ; 22:9, s. 1339-1348
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Hepatopancreatoduodenectomy (HPD) is an aggressive operation for treatment of advanced bile duct and gallbladder cancer associated with high perioperative morbidity and mortality, and uncertain oncological benefit in terms of survival. Few reports on HPD from Western centers exist. The purpose of this study was to evaluate safety and efficacy for HPD in European centers. Method: Members of the European-African HepatoPancreatoBiliary Association were invited to report all consecutive patients operated with HPD for bile duct or gallbladder cancer between January 2003 and January 2018. The patient and tumor characteristics, perioperative and survival outcomes were analyzed. Results: In total, 66 patients from 19 European centers were included in the analysis. 90-day mortality rate was 17% and 13% for bile duct and gallbladder cancer respectively. All factors predictive of perioperative mortality were patient and disease-specific. The three-year overall survival excluding 90-day mortality was 80% for bile duct and 30% for gallbladder cancer (P = 0.013). In multivariable analysis R0-resection had a significant impact on overall survival. Conclusion: HPD, although being associated with substantial perioperative mortality, can offer a survival benefit in patient subgroups with bile duct cancer and gallbladder cancer. To achieve negative resection margins is paramount for an improved survival outcome.
|
|
| 26. |
- Kapilashrami, A., et al.
(författare)
-
Bubble formation through reaction at liquid-liquid interfaces
- 2005
-
Ingår i: Steel Research International. - : Wiley. - 1611-3683. ; 76:9, s. 616-623
-
Tidskriftsartikel (refereegranskat)abstract
- Slag foaming is an important phenomenon in steelmaking processes with both beneficial as well as negative effects. The present work is part of the wider project on the modelling of slag foaming, with special reference to dynamic conditions. Since bubble formation is the first step to foam formation, the present work was carried out in an attempt to simulate the bubble formation in slag/metal reactions in steelmaking processes by water-modelling experiments. The bubble formation due to the gas produced through chemical reaction at the interface between oleic acid and sodium bicarbonate solution was systematically monitored. The chemical reaction rate was varied by varying the concentration of sodium bicarbonate. The bubbles were observed to be generated in the heavier aqueous phase just below the water-oil interface. The bubbles penetrated the interface and escaped through the oil phase. The rate of the reaction was estimated from the volume of the gas that passed the water/oil interface. It was observed that the bubble formation and bubble growth mechanism were influenced by the reaction rate while the bubble size seemed to be unaffected by the reaction rate.
|
|
| 27. |
- Kapilashrami, A., et al.
(författare)
-
Foaming of slags under dynamic conditions
- 2006
-
Ingår i: Metallurgical and materials transactions. B, process metallurgy and materials processing science. - : Springer Science and Business Media LLC. - 1073-5615 .- 1543-1916. ; 37:1, s. 109-117
-
Tidskriftsartikel (refereegranskat)abstract
- Slag foaming under dynamic conditions has been studied in laboratory scale to examine the influence of properties commonly used to describe the foaminess and foam stability of slags under steady-state conditions. Synthetically produced slags with compositions relevant to tool steel and stainless steel production were studied through X-ray equipment in measurements simulating the dynamic conditions found in real processes. It is found that the dynamic systems display a more complex behavior than systems Under steady state. Traditional theories for foaming do not seem to be valid for slag foaming under dynamic conditions. The foam displays a fluctuating behavior, which the presently available models are not able to take into account. The concept of a foaming index does not seem to be applicable, resulting in the need for alternative models.
|
|
| 28. |
- Kapilashrami, A., et al.
(författare)
-
The fluctuations in slag foam under dynamic conditions
- 2006
-
Ingår i: Metallurgical and materials transactions. B, process metallurgy and materials processing science. - : Springer Science and Business Media LLC. - 1073-5615 .- 1543-1916. ; 37:1, s. 145-148
-
Tidskriftsartikel (refereegranskat)abstract
- ABHA KAPILASHRAMI, formerly with the Royal Institute of Technology, is with Corus Research, Development and Technology, 1970 CA IJmuiden, The Netherlands. ASHOK KUMAR LAHIRI, Professor, is with the Department of Metallurgy, Indian Institute of Science, Bangalore 560012, India. MARTEN GORNERUP and SESHADRI SEETHARAMAN, Professor, are with the Department of Material Science and Engineering, Royal Institute of Technology, 10044 Stockholm, Sweden. Contact c-mail: raman@ kth.se.
|
|
| 29. |
- Kapilashrami, E., et al.
(författare)
-
Studies of the wetting characteristics of liquid iron on dense alumina by the X-ray sessile drop technique
- 2003
-
Ingår i: Metallurgical and materials transactions. B, process metallurgy and materials processing science. - : Springer Science and Business Media LLC. - 1073-5615 .- 1543-1916. ; 34:2, s. 193-199
-
Tidskriftsartikel (refereegranskat)abstract
- In the present work, the reaction between a molten iron drop and dense alumina was studied using the X-ray sessile-drop method under different oxygen partial pressures in the gas atmosphere. The changes in contact angles between the iron drop and the alumina substrate were followed as functions of temperature and varying partial pressures of oxygen in the temperature range 1823 to 1873 K both in static and dynamic modes. The results of the contact angle measurements with pure iron in contact with dense alumina in extremely well-purified argon as well as under different oxygen partial pressures in the gas atmosphere showed good agreement with earlier measurements reported in the literature. In the dynamic mode, when argon was replaced by a CO-CO2-Ar mixture with a well-defined PO, in the gas, the contact angle showed an initial decrease followed by a period of nearly constant contact angle. At the end of this period, the length of which was a function of the P-O2 imposed, a further steep decrease in the contact angle was noticed. An intermediate layer of FeAl2O4 was detected in the scanning electron microscope (SEM) analysis of the reacted substrates. An interesting observation in the present experiments is that the iron drop moved away from the site of the reaction once the product layer covered the interface. The results are analyzed on the basis of the various forces acting on the drop.
|
|
| 30. |
- Kapilashrami, F., et al.
(författare)
-
Investigation of the reactions between oxygen-containing iron and SiO2 substrate by X-ray sessile-drop technique
- 2003
-
Ingår i: Metallurgical and materials transactions. B, process metallurgy and materials processing science. - 1073-5615 .- 1543-1916. ; 34:5, s. 647-652
-
Tidskriftsartikel (refereegranskat)abstract
- The X-ray sessile-drop method was employed in the present investigation to measure the contact angle between liquid iron and a silica substrate under argon as well as CO-CO2-Ar atmospheres in the temperature range of 1823 to 1833 K. In the latter case, the measurements were carried out in the dynamic mode, and the contact-angle changes were followed as a function of time as oxygen in the gas dissolved in the metal. The static measurements in argon showed that the contact angles in the experimental temperature range are of the order of 135 deg, similar to those observed in the case of the alumina substrate. In the dynamic mode, oxygen partial pressures varying between 9.9.10(-4) and 1.5.10(-2) Pa were imposed on the system. In these experiments, the contact angle decreased in two stages, with an intermediate steady-state region. Fayalite slag, formed due to the reaction between the metallic phase and the substrate, was found to accumulate around the drop. The results are of relevance in understanding the mechanism of corrosion of silica-containing refractories by molten iron.
|
|
| 31. |
- Lahiri, A, et al.
(författare)
-
Exploring the idea of self-guided dynamics
- 2001
-
Ingår i: JOURNAL OF CHEMICAL PHYSICS. - : AIP Publishing. - 0021-9606 .- 1089-7690. ; 114:14, s. 5993-5999
-
Tidskriftsartikel (övrigt vetenskapligt/konstnärligt)
|
|
| 32. |
- Shankar, A., et al.
(författare)
-
Estimation of viscosity for blast furnace type slags
- 2007
-
Ingår i: Ironmaking & steelmaking. - : Informa UK Limited. - 0301-9233 .- 1743-2812. ; 34:6, s. 477-481
-
Tidskriftsartikel (refereegranskat)abstract
- A viscosity model based on a new definition of basicity has been proposed for blast furnace type slags. Conceptually, this definition of basicity is close to Bell's definition of basicity as used for modelling of sulphide capacity of blast furnace type slags. The model developed in the present work is applicable for wide range of alumina, magnesia and titania containing blast furnace slags, while most of the models available in the literature are mainly applicable for a limited range of slag composition. Viscosity estimation by this model is close to the experimental value for all types of blast furnace slags. This model is based on the chemical composition of slag and is applicable for slags above liquidus temperature.
|
|
| 33. |
- Basu, S., et al.
(författare)
-
Activity of Ferric Oxide in Steelmaking Slag
- 2010
-
Ingår i: Metallurgical and materials transactions. B, process metallurgy and materials processing science. - : Springer Science and Business Media LLC. - 1073-5615 .- 1543-1916. ; 41:2, s. 414-419
-
Tidskriftsartikel (refereegranskat)abstract
- Refining reactions in steelmaking primarily involve oxidation of impurity element(s). The oxidation potential of the slag and the activity of oxygen in the metal (h(O)) are the major factors controlling these chemical reactions. In turn, the oxidation potential of the slag is influenced strongly by the equilibrium distribution of oxygen between ferrous and ferric oxides. We recently investigated the activity coefficient of FeO in steelmaking slag and the effect of chemical composition thereon. This work is focused on estimation of the activity coefficient of Fe2O3.
|
|
| 34. |
- Basu, S., et al.
(författare)
-
Activity of iron oxide in steelmaking slag
- 2008
-
Ingår i: Metallurgical and materials transactions. B, process metallurgy and materials processing science. - : Springer Science and Business Media LLC. - 1073-5615 .- 1543-1916. ; 39:3, s. 447-456
-
Tidskriftsartikel (refereegranskat)abstract
- Most refining reactions in steelmaking involve oxidation of impurity element(s). The product(s) of oxidation either dissolve in the slag or escape as gaseous phase. The activities of oxygen in the metal (h (O)), and that of "FeO" in slag (a (FeO)), are major factors controlling these chemical reactions. The activities of oxygen and "FeO" are thermodynamically related, provided equilibrium distribution of oxygen between the slag and the metal is attained. This enables direct estimation of one parameter from the other. A thorough knowledge of the variation in activity of FeO, and factors affecting the same, is therefore of great importance in the process metallurgy of steelmaking. The present work experimentally measures the activity of FeO in steelmaking slags and attempts to develop a correlation for estimation of gamma(FeO) as a function of temperature and chemical composition of the slag.
|
|
| 35. |
|
|
| 36. |
|
|
| 37. |
- Basu, S., et al.
(författare)
-
Thermodynamics of Phosphorus and Sulphur Removal during Basic Oxygen Steelmaking
- 2010
-
Ingår i: STEEL RESEARCH INTERNATIONAL. - : Wiley. ; , s. 932-939
-
Konferensbidrag (refereegranskat)abstract
- Removal of impurity elements from hot metal is essential in basic oxygen steelmaking. Oxidation of phosphorus from hot metal has been studied by several authors since the early days of steelmaking. Influence of different parameters on the distribution of phosphorus, seen during the recent work of the authors, differs somewhat from that reported earlier. On the other hand, removal of sulphur during steelmaking has drawn much less attention. This may be due to the magnitude of desulphurisation in oxygen steelmaking being relatively low and desulphurisation during hot metal pre-treatment or in the ladle furnace offering better commercial viability Further, it is normally accepted that sulphur is removed to steelmaking slag in the form of sulphide only However, recent investigations have indicated that a significant amount of sulphur removed during basic oxygen steelmaking can exist in the form of sulphate in the slag under oxidising conditions. The distribution of sulphur during steelmaking becomes more important in the event of carry-over of sulphur-rich blast-furnace slag, which increases sulphur load in the BOF. The chemical nature of sulphur in this slag undergoes a gradual transition from sulphide to sulphate as the oxidative refining progresses.
|
|
| 38. |
|
|
| 39. |
- Björkqvist, Maria, et al.
(författare)
-
A novel pathogenic pathway of immune activation detectable before clinical onset in Huntington's disease.
- 2008
-
Ingår i: Journal of Experimental Medicine. - : Rockefeller University Press. - 1540-9538 .- 0022-1007. ; 205, s. 1869-1877
-
Tidskriftsartikel (refereegranskat)abstract
- Huntington's disease (HD) is an inherited neurodegenerative disorder characterized by both neurological and systemic abnormalities. We examined the peripheral immune system and found widespread evidence of innate immune activation detectable in plasma throughout the course of HD. Interleukin 6 levels were increased in HD gene carriers with a mean of 16 years before the predicted onset of clinical symptoms. To our knowledge, this is the earliest plasma abnormality identified in HD. Monocytes from HD subjects expressed mutant huntingtin and were pathologically hyperactive in response to stimulation, suggesting that the mutant protein triggers a cell-autonomous immune activation. A similar pattern was seen in macrophages and microglia from HD mouse models, and the cerebrospinal fluid and striatum of HD patients exhibited abnormal immune activation, suggesting that immune dysfunction plays a role in brain pathology. Collectively, our data suggest parallel central nervous system and peripheral pathogenic pathways of immune activation in HD.
|
|
| 40. |
|
|
| 41. |
|
|
| 42. |
|
|
| 43. |
- Forsberg, Ulrika, et al.
(författare)
-
First Experiment at TASCA Towards X-Ray Fingerprinting of Element 115 Decay Chains
- 2012
-
Ingår i: Acta Physica Polonica. Series B: Elementary Particle Physics, Nuclear Physics, Statistical Physics, Theory of Relativity, Field Theory. - 0587-4254. ; 43:2, s. 305-311
-
Tidskriftsartikel (refereegranskat)abstract
- To identify the atomic number of superheavy nuclei produced in Ca-48-induced fusion-evaporation reactions, an experiment aiming at measuring characteristic X-rays is being prepared at GSI, Darmstadt, Germany. The gas-filled separator TASCA will be employed, sending the residues towards the multi-coincidence detector setup TASISpec. Two ion-optical modes relying on differing magnetic polarities of the quadrupole magnets can be used at TASCA. New simulations and experimental tests of transmission and background suppression for these two focusing modes into TASISpec are presented.
|
|
| 44. |
- Iglesias, José, et al.
(författare)
-
PPARβ/δ affects pancreatic β cell mass and insulin secretion in mice
- 2012
-
Ingår i: Journal of Clinical Investigation. - 0021-9738 .- 1558-8238. ; 122:11, s. 4105-4117
-
Tidskriftsartikel (refereegranskat)abstract
- PPARβ/δ protects against obesity by reducing dyslipidemia and insulin resistance via effects in muscle, adipose tissue, and liver. However, its function in pancreas remains ill defined. To gain insight into its hypothesized role in β cell function, we specifically deleted Pparb/d in the epithelial compartment of the mouse pancreas. Mutant animals presented increased numbers of islets and, more importantly, enhanced insulin secretion, causing hyperinsulinemia. Gene expression profiling of pancreatic β cells indicated a broad repressive function of PPARβ/δ affecting the vesicular and granular compartment as well as the actin cytoskeleton. Analyses of insulin release from isolated PPARβ/δ-deficient islets revealed an accelerated second phase of glucose-stimulated insulin secretion. These effects in PPARβ/δ-deficient islets correlated with increased filamentous actin (F-actin) disassembly and an elevation in protein kinase D activity that altered Golgi organization. Taken together, these results provide evidence for a repressive role for PPARβ/δ in β cell mass and insulin exocytosis, and shed a new light on PPARβ/δ metabolic action.
|
|
| 45. |
- Kapilashrami, Abha, et al.
(författare)
-
Bubble formation and dynamic slag foaming phenomena
- 2006
-
Ingår i: 2006 TMS Fall Extraction and Processing Division: Sohn International Symposium. - 0873396332 - 9780873396332 ; , s. 233-245
-
Konferensbidrag (refereegranskat)abstract
- Slag foaming proves to be both blessing and curse for the process productivity, depending on where in the process it occurs. In pyrometallurgical processes, slag foaming is often a result of chemical reactions taking place in the slag. As the slag composition and reaction rates are changing, foaming occurs under dynamic conditions. In the present work, slag foaming was studied with XRF. The foam displayed a fluctuating behaviour, unaccountable by existing models. The concept of foaming index was found not to be satisfactory in describing the foam, resulting in the need for alternative theories. The rate of fluctuations was seen to be related to the difference between rate of gas generation and rate of gas escape from the system (Ug-Ue) as well as the bubble sizes. Thus, model development of dynamic foaming phenomenon has to take the effective chemical reaction rate as well as the bubble sizes into consideration. The first step in obtaining foam is to form bubbles. In the present work, gas bubbles were generated through chemical reaction at interface between two immiscible liquids and the bubble formation was studied optically. The gas bubble size was seen to be uninfluenced by the reaction rate. However, bubble formation was seen to take place in one of the phases and since the bubbles consequently traversed the interface under the influence of buoyancy, the viscosity of the first phase was found to influence the final bubble size where increased viscosity would yield a larger bubble size.
|
|
| 46. |
|
|
| 47. |
- Lahiri, A. K., et al.
(författare)
-
Foam in iron and steelmaking
- 2004
-
Ingår i: High Temperature Materials and Processes. - : Walter de Gruyter GmbH. - 0334-6455 .- 2191-0324. ; 22:06-maj, s. 345-351
-
Tidskriftsartikel (refereegranskat)abstract
- Foam is common in iron and steelmaking processes. Iron and steelmaking slags have inherent foaminess but the presence of strong surface active compounds like P2O5, Cr2O3, CaS, V2O5 and CaF2 make the foam more stable. Stable foam can form only in the presence of surface active agents. When a bubble rises on the surface of a liquid, the film around it develops a concentration gradient of surface active agents such that Marangoni force acts in upward direction. This prevents liquid drainage from the film. The presence of surface active agents favours fort-nation of smaller bubbles and prevents bubble rupture as well. So a strong surface active agent where dsigma/dc is high makes the foam very stable. When a bubble comes into contact with a solid surface, the dynamic contact angle is different from the equilibrium value. If the former is less than the latter, there is a resultant outward force which tries to make the bubble flat. This force is responsible for the collapse of foamy slags in the presence of large carbonaceous particles. This force is not significant for very small bubbles and is not effective when carbon particles are much smaller than the bubble.
|
|
| 48. |
- Lahiri, A. K., et al.
(författare)
-
Foaming behavior of slags
- 2002
-
Ingår i: Metallurgical and materials transactions. B, process metallurgy and materials processing science. - : Springer Science and Business Media LLC. - 1073-5615 .- 1543-1916. ; 33:3, s. 499-502
-
Tidskriftsartikel (refereegranskat)
|
|
| 49. |
|
|
| 50. |
|
|
