| 1. |
|
|
| 2. |
|
|
| 3. |
|
|
| 4. |
|
|
| 5. |
- Tran, K. B., et al.
(författare)
-
The global burden of cancer attributable to risk factors, 2010-19: a systematic analysis for the Global Burden of Disease Study 2019
- 2022
-
Ingår i: Lancet. - 0140-6736. ; 400:10352, s. 563-591
-
Tidskriftsartikel (refereegranskat)abstract
- Background Understanding the magnitude of cancer burden attributable to potentially modifiable risk factors is crucial for development of effective prevention and mitigation strategies. We analysed results from the Global Burden of Diseases, Injuries, and Risk Factors Study (GBD) 2019 to inform cancer control planning efforts globally. Methods The GBD 2019 comparative risk assessment framework was used to estimate cancer burden attributable to behavioural, environmental and occupational, and metabolic risk factors. A total of 82 risk-outcome pairs were included on the basis of the World Cancer Research Fund criteria. Estimated cancer deaths and disability-adjusted life-years (DALYs) in 2019 and change in these measures between 2010 and 2019 are presented. Findings Globally, in 2019, the risk factors included in this analysis accounted for 4.45 million (95% uncertainty interval 4.01-4.94) deaths and 105 million (95.0-116) DALYs for both sexes combined, representing 44.4% (41.3-48.4) of all cancer deaths and 42.0% (39.1-45.6) of all DALYs. There were 2.88 million (2.60-3.18) risk-attributable cancer deaths in males (50.6% [47.8-54.1] of all male cancer deaths) and 1.58 million (1.36-1.84) risk-attributable cancer deaths in females (36.3% [32.5-41.3] of all female cancer deaths). The leading risk factors at the most detailed level globally for risk-attributable cancer deaths and DALYs in 2019 for both sexes combined were smoking, followed by alcohol use and high BMI. Risk-attributable cancer burden varied by world region and Socio-demographic Index (SDI), with smoking, unsafe sex, and alcohol use being the three leading risk factors for risk-attributable cancer DALYs in low SDI locations in 2019, whereas DALYs in high SDI locations mirrored the top three global risk factor rankings. From 2010 to 2019, global risk-attributable cancer deaths increased by 20.4% (12.6-28.4) and DALYs by 16.8% (8.8-25.0), with the greatest percentage increase in metabolic risks (34.7% [27.9-42.8] and 33.3% [25.8-42.0]). Interpretation The leading risk factors contributing to global cancer burden in 2019 were behavioural, whereas metabolic risk factors saw the largest increases between 2010 and 2019. Reducing exposure to these modifiable risk factors would decrease cancer mortality and DALY rates worldwide, and policies should be tailored appropriately to local cancer risk factor burden. Copyright (C) 2022 The Author(s). Published by Elsevier Ltd. This is an Open Access article under the CC BY 4.0 license.
|
|
| 6. |
|
|
| 7. |
- Bouyoucef, S E, et al.
(författare)
-
Poster Session 2 : Monday 4 May 2015, 08
- 2015
-
Ingår i: European Heart Journal Cardiovascular Imaging. - : Oxford University Press (OUP). - 2047-2404 .- 2047-2412. ; 16 Suppl 1
-
Tidskriftsartikel (refereegranskat)
|
|
| 8. |
|
|
| 9. |
|
|
| 10. |
- Ferreira, Mjv, et al.
(författare)
-
Poster Session 3 : Tuesday 5 May 2015, 08
- 2015
-
Ingår i: European Heart Journal Cardiovascular Imaging. - : Oxford University Press (OUP). - 2047-2404 .- 2047-2412. ; 16 Suppl 1
-
Tidskriftsartikel (refereegranskat)
|
|
| 11. |
|
|
| 12. |
- Di Nitto, A., et al.
(författare)
-
Study of Non-fusion Products in the 50Ti+249Cf Reaction
- 2018
-
Ingår i: Physics Letters, Section B: Nuclear, Elementary Particle and High-Energy Physics. - : Elsevier BV. - 0370-2693. ; 784, s. 199-205
-
Tidskriftsartikel (refereegranskat)abstract
- The isotopic distribution of nuclei produced in the 50Ti + 249Cf reaction has been studied at the gas-filled recoil separator TASCA at GSI Darmstadt, which separates ions according to differences in magnetic rigidity. The bombardment was performed at an energy around the Bass barrier and with the TASCA magnetic fields set for collecting fusion-evaporation reaction products. Fifty-three isotopes located “north-east” of 208Pb were identified as recoiling products formed in non-fusion channels of the reaction. These recoils were implanted with energies in two distinct ranges; besides one with higher energy, a significant low-energy contribution was identified. The latter observation was not expected to occur according to kinematics of the known types of reactions, namely quasi-elastic, multi-nucleon transfer, deep-inelastic collisions or quasifission. The present observations are discussed within the framework of two-body kinematics passing through the formation of a composite system.
|
|
| 13. |
- Khuyagbaatar, J., et al.
(författare)
-
48Ca+249Bk Fusion Reaction Leading to Element Z=117: Long-Lived α-Decaying 270Db and Discovery of 266Lr
- 2014
-
Ingår i: Physical Review Letters. - 1079-7114. ; 112:17
-
Tidskriftsartikel (refereegranskat)abstract
- The superheavy element with atomic number Z=117 was produced as an evaporation residue in the 48Ca+249Bk fusion reaction at the gas-filled recoil separator TASCA at GSI Darmstadt, Germany. The radioactive decay of evaporation residues and their α-decay products was studied using a detection setup that allowed measuring decays of single atomic nuclei with half-lives between sub-μs and a few days. Two decay chains comprising seven α decays and a spontaneous fission each were identified and are assigned to the isotope 294-117 and its decay products. A hitherto unknown α-decay branch in 270Db (Z=105) was observed, which populated the new isotope 266Lr (Z=103). The identification of the long-lived (T1/2=1.0+1.9−0.4 h) α-emitter 270Db marks an important step towards the observation of even more long-lived nuclei of superheavy elements located on an “island of stability.”
|
|
| 14. |
- Khuyagbaatar, J., et al.
(författare)
-
Fusion reaction 48Ca + 249Bk leading to formation of the element Ts (Z=117)
- 2019
-
Ingår i: Physical Review C. - 2469-9985. ; 99:5
-
Tidskriftsartikel (refereegranskat)abstract
- The heaviest currently known nuclei, which have up to 118 protons, have been produced in 48Ca induced reactions with actinide targets. Among them, the element tennessine (Ts), which has 117 protons, has been synthesized by fusing 48Ca with the radioactive target 249Bk, which has a half-life of 327 d. The experiment was performed at the gas-filled recoil separator TASCA. Two long and two short α decay chains were observed. The long chains were attributed to the decay of 294Ts. The possible origin of the short-decay chains is discussed in comparison with the known experimental data. They are found to fit with the decay chain patterns attributed to 293Ts. The present experimental results confirm the previous findings at the Dubna Gas-Filled Recoil Separator on the decay chains originating from the nuclei assigned to Ts.
|
|
| 15. |
- Khuyagbaatar, J., et al.
(författare)
-
Search for elements 119 and 120
- 2020
-
Ingår i: Physical Review C. - 2469-9985. ; 102:6
-
Tidskriftsartikel (refereegranskat)abstract
- A search for production of the superheavy elements with atomic numbers 119 and 120 was performed in the 50Ti+249Bk and 50Ti+249Cf fusion-evaporation reactions, respectively, at the gas-filled recoil separator TASCA at GSI Darmstadt, Germany. Over four months of irradiation, the 249Bk target partially decayed into 249Cf, which allowed for a simultaneous search for both elements. Neither was detected at cross-section sensitivity levels of 65 and 200 fb for the 50Ti+249Bk and 50Ti+249Cf reactions, respectively, at a midtarget beam energy of Elab = 281.5 MeV. The nonobservation of elements 119 and 120 is discussed within the concept of fusion-evaporation reactions including various theoretical predictions on the fission-barrier heights of superheavy nuclei in the region of the island of stability.
|
|
| 16. |
|
|
| 17. |
|
|
| 18. |
|
|
| 19. |
|
|
| 20. |
- Korecka, A, et al.
(författare)
-
Bidirectional communication between the Aryl hydrocarbon Receptor (AhR) and the microbiome tunes host metabolism
- 2016
-
Ingår i: NPJ biofilms and microbiomes. - : Springer Science and Business Media LLC. - 2055-5008. ; 2, s. 16014-
-
Tidskriftsartikel (refereegranskat)abstract
- The ligand-induced transcription factor, aryl hydrocarbon receptor (AhR) is known for its capacity to tune adaptive immunity and xenobiotic metabolism—biological properties subject to regulation by the indigenous microbiome. The objective of this study was to probe the postulated microbiome-AhR crosstalk and whether such an axis could influence metabolic homeostasis of the host. Utilising a systems-biology approach combining in-depth 1H-NMR-based metabonomics (plasma, liver and skeletal muscle) with microbiome profiling (small intestine, colon and faeces) of AhR knockout (AhR−/−) and wild-type (AhR+/+) mice, we assessed AhR function in host metabolism. Microbiome metabolites such as short-chain fatty acids were found to regulate AhR and its target genes in liver and intestine. The AhR signalling pathway, in turn, was able to influence microbiome composition in the small intestine as evident from microbiota profiling of the AhR+/+ and AhR−/− mice fed with diet enriched with a specific AhR ligand or diet depleted of any known AhR ligands. The AhR−/− mice also displayed increased levels of corticosterol and alanine in serum. In addition, activation of gluconeogenic genes in the AhR−/− mice was indicative of on-going metabolic stress. Reduced levels of ketone bodies and reduced expression of genes involved in fatty acid metabolism in the liver further underscored this observation. Interestingly, exposing AhR−/− mice to a high-fat diet showed resilience to glucose intolerance. Our data suggest the existence of a bidirectional AhR-microbiome axis, which influences host metabolic pathways.
|
|
| 21. |
- Lahiri, S, et al.
(författare)
-
The gut microbiota influences skeletal muscle mass and function in mice
- 2019
-
Ingår i: Science translational medicine. - : American Association for the Advancement of Science (AAAS). - 1946-6242 .- 1946-6234. ; 11:502
-
Tidskriftsartikel (refereegranskat)abstract
- Transplanting the gut microbiota of pathogen-free mice into germ-free mice improves skeletal muscle mass and strength.
|
|
| 22. |
- Yakushev, A., et al.
(författare)
-
On the adsorption and reactivity of element 114, flerovium
- 2022
-
Ingår i: Frontiers in Chemistry. - : Frontiers Media SA. - 2296-2646. ; 10
-
Tidskriftsartikel (refereegranskat)abstract
- Flerovium (Fl, element 114) is the heaviest element chemically studied so far. To date, its interaction with gold was investigated in two gas-solid chromatography experiments, which reported two different types of interaction, however, each based on the level of a few registered atoms only. Whereas noble-gas-like properties were suggested from the first experiment, the second one pointed at a volatile-metal-like character. Here, we present further experimental data on adsorption studies of Fl on silicon oxide and gold surfaces, accounting for the inhomogeneous nature of the surface, as it was used in the experiment and analyzed as part of the reported studies. We confirm that Fl is highly volatile and the least reactive member of group 14. Our experimental observations suggest that Fl exhibits lower reactivity towards Au than the volatile metal Hg, but higher reactivity than the noble gas Rn.
|
|
| 23. |
- Attia, Zachi I., et al.
(författare)
-
Rapid Exclusion of COVID Infection With the Artificial Intelligence Electrocardiogram
- 2021
-
Ingår i: Mayo Clinic proceedings. - : ELSEVIER SCIENCE INC. - 0025-6196 .- 1942-5546. ; 96:8, s. 2081-2094
-
Tidskriftsartikel (refereegranskat)abstract
- Objective: To rapidly exclude severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infection using artificial intelligence applied to the electrocardiogram (ECG). Methods: A global, volunteer consortium from 4 continents identified patients with ECGs obtained around the time of polymerase chain reaction-confirmed COVID-19 diagnosis and age- and sex-matched controls from the same sites. Clinical characteristics, polymerase chain reaction results, and raw electrocardiographic data were collected. A convolutional neural network was trained using 26,153 ECGs (33.2% COVID positive), validated with 3826 ECGs (33.3% positive), and tested on 7870 ECGs not included in other sets (32.7% positive). Performance under different prevalence values was tested by adding control ECGs from a single high-volume site. Results: The area under the curve for detection of acute COVID-19 infection in the test group was 0.767 (95% CI, 0.756 to 0.778; sensitivity, 98%; specificity, 10%; positive predictive value, 37%; negative predictive value, 91%). To more accurately reflect a real-world population, 50,905 normal controls were added to adjust the COVID prevalence to approximately 5% (2657/58,555), resulting in an area under the curve of 0.780 (95% CI, 0.771 to 0.790) with a specificity of 12.1% and a negative predictive value of 99.2%. Conclusion: Infection with SARS-CoV-2 results in electrocardiographic changes that permit the artificial intelligence-enhanced ECG to be used as a rapid screening test with a high negative predictive value (99.2%). This may permit the development of electrocardiography-based tools to rapidly screen individuals for pandemic control. (C) 2021 Mayo Foundation Medical Education and Research
|
|
| 24. |
- Basu, S., et al.
(författare)
-
Activity of Ferric Oxide in Steelmaking Slag
- 2010
-
Ingår i: Metallurgical and materials transactions. B, process metallurgy and materials processing science. - : Springer Science and Business Media LLC. - 1073-5615 .- 1543-1916. ; 41:2, s. 414-419
-
Tidskriftsartikel (refereegranskat)abstract
- Refining reactions in steelmaking primarily involve oxidation of impurity element(s). The oxidation potential of the slag and the activity of oxygen in the metal (h(O)) are the major factors controlling these chemical reactions. In turn, the oxidation potential of the slag is influenced strongly by the equilibrium distribution of oxygen between ferrous and ferric oxides. We recently investigated the activity coefficient of FeO in steelmaking slag and the effect of chemical composition thereon. This work is focused on estimation of the activity coefficient of Fe2O3.
|
|
| 25. |
- Basu, S., et al.
(författare)
-
Activity of iron oxide in steelmaking slag
- 2008
-
Ingår i: Metallurgical and materials transactions. B, process metallurgy and materials processing science. - : Springer Science and Business Media LLC. - 1073-5615 .- 1543-1916. ; 39:3, s. 447-456
-
Tidskriftsartikel (refereegranskat)abstract
- Most refining reactions in steelmaking involve oxidation of impurity element(s). The product(s) of oxidation either dissolve in the slag or escape as gaseous phase. The activities of oxygen in the metal (h (O)), and that of "FeO" in slag (a (FeO)), are major factors controlling these chemical reactions. The activities of oxygen and "FeO" are thermodynamically related, provided equilibrium distribution of oxygen between the slag and the metal is attained. This enables direct estimation of one parameter from the other. A thorough knowledge of the variation in activity of FeO, and factors affecting the same, is therefore of great importance in the process metallurgy of steelmaking. The present work experimentally measures the activity of FeO in steelmaking slags and attempts to develop a correlation for estimation of gamma(FeO) as a function of temperature and chemical composition of the slag.
|
|
| 26. |
|
|
| 27. |
- Basu, S., et al.
(författare)
-
Thermodynamics of Phosphorus and Sulphur Removal during Basic Oxygen Steelmaking
- 2010
-
Ingår i: STEEL RESEARCH INTERNATIONAL. - : Wiley. ; , s. 932-939
-
Konferensbidrag (refereegranskat)abstract
- Removal of impurity elements from hot metal is essential in basic oxygen steelmaking. Oxidation of phosphorus from hot metal has been studied by several authors since the early days of steelmaking. Influence of different parameters on the distribution of phosphorus, seen during the recent work of the authors, differs somewhat from that reported earlier. On the other hand, removal of sulphur during steelmaking has drawn much less attention. This may be due to the magnitude of desulphurisation in oxygen steelmaking being relatively low and desulphurisation during hot metal pre-treatment or in the ladle furnace offering better commercial viability Further, it is normally accepted that sulphur is removed to steelmaking slag in the form of sulphide only However, recent investigations have indicated that a significant amount of sulphur removed during basic oxygen steelmaking can exist in the form of sulphate in the slag under oxidising conditions. The distribution of sulphur during steelmaking becomes more important in the event of carry-over of sulphur-rich blast-furnace slag, which increases sulphur load in the BOF. The chemical nature of sulphur in this slag undergoes a gradual transition from sulphide to sulphate as the oxidative refining progresses.
|
|
| 28. |
|
|
| 29. |
- Düllmann, Ch. E., et al.
(författare)
-
Production and Decay of Element 114: High Cross Sections and the New Nucleus 277Hs
- 2010
-
Ingår i: Physical Review Letters. - 1079-7114. ; 104:25
-
Tidskriftsartikel (refereegranskat)abstract
- The fusion-evaporation reaction 244Pu(48Ca, 3-4n)288,289114 was studied at the new gas-filled recoil separator TASCA. Thirteen correlated decay chains were observed and assigned to the production and decay of 288,289114. At a compound nucleus excitation energy of E* = 39.8-43.9 MeV, the 4n evaporation channel cross section was 9.8(-3.1)(+3.9) pb. At E* = 36.1-39.5 MeV, that of the 3n evaporation channel was 8.0-(+7.4)(4.5) pb. In one of the 3n evaporation channel decay chains, a previously unobserved alpha branch in 281Ds was observed ( probability to be of random origin from background: 0.1%). This alpha decay populated the new nucleus 277Hs, which decayed by spontaneous fission after a lifetime of 4.5 ms.
|
|
| 30. |
- Forsberg, Ulrika, et al.
(författare)
-
First Experiment at TASCA Towards X-Ray Fingerprinting of Element 115 Decay Chains
- 2012
-
Ingår i: Acta Physica Polonica. Series B: Elementary Particle Physics, Nuclear Physics, Statistical Physics, Theory of Relativity, Field Theory. - 0587-4254. ; 43:2, s. 305-311
-
Tidskriftsartikel (refereegranskat)abstract
- To identify the atomic number of superheavy nuclei produced in Ca-48-induced fusion-evaporation reactions, an experiment aiming at measuring characteristic X-rays is being prepared at GSI, Darmstadt, Germany. The gas-filled separator TASCA will be employed, sending the residues towards the multi-coincidence detector setup TASISpec. Two ion-optical modes relying on differing magnetic polarities of the quadrupole magnets can be used at TASCA. New simulations and experimental tests of transmission and background suppression for these two focusing modes into TASISpec are presented.
|
|
| 31. |
- Gates, J. M., et al.
(författare)
-
First Superheavy Element Experiments at the GSI Recoil Separator TASCA: The Production and Decay of Element 114 in the 244Pu(48Ca,3-4n) Reaction
- 2011
-
Ingår i: Physical Review C (Nuclear Physics). - 0556-2813. ; 83:5
-
Tidskriftsartikel (refereegranskat)abstract
- Experiments with the new recoil separator, Transactinide Separator and Chemistry Apparatus (TASCA), at the GSI were performed by using beams of Ca-48 to irradiate targets of Pb206-208, which led to the production of No252-254 isotopes. These studies allowed for evaluation of the performance of TASCA when coupled to a new detector and electronics system. By following these studies, the isotopes of element 114 ((288-291)114) were produced in irradiations of Pu-244 targets with Ca-48 beams at compound nucleus excitation energies around 41.7 and 37.5 MeV, demonstrating TASCA's ability to perform experiments with picobarn-level cross sections. A total of 15 decay chains were observed and were assigned to the decay of 288-291114. A new a-decay branch in (281)Ds was observed, leading to the new nucleus (277)Hs.
|
|
| 32. |
- Khuyagbaatar, J., et al.
(författare)
-
Study of the Average Charge States of 188Pb and 252,254No Ions at the Gas-filled Separator TASCA
- 2012
-
Ingår i: Nuclear Instruments & Methods in Physics Research. Section A: Accelerators, Spectrometers, Detectors, and Associated Equipment. - : Elsevier BV. - 0167-5087 .- 0168-9002. ; 689, s. 40-46
-
Tidskriftsartikel (refereegranskat)abstract
- The average charge states of Pb-188 and No-252,No-254 ions in dilute helium gas were measured at the gas-filled recoil separator TASCA. Hydrogen gas was also used as a filling gas for measurements of the average charge state of No-254. Helium and hydrogen gases at pressures from 0.2 mbar to 2.0 mbar were used. A strong dependence of the average charge state on the pressure of the filling gases was observed for both, helium and hydrogen. The influence of this dependence, classically attributed to the so-called "density effect", on the performance of TASCA was investigated. The average charge states of No-254 ions were also measured in mixtures of helium and hydrogen gases at low gas pressures around 1.0 mbar. From the experimental results simple expressions for the prediction of average charge states of heavy ions moving in rarefied helium gas, hydrogen gas, and in their mixture were derived. (C) 2012 Elsevier B.V. All rights reserved.
|
|
| 33. |
|
|
| 34. |
- Soos, Mate, et al.
(författare)
-
Tinted, Detached, and Lazy CNF-XOR Solving and Its Applications to Counting and Sampling
- 2020
-
Ingår i: Computer Aided Verification - 32nd International Conference, CAV 2020, Proceedings. - Cham : Springer International Publishing. - 0302-9743 .- 1611-3349. - 9783030532871 ; 12224 LNCS, s. 463-484
-
Konferensbidrag (refereegranskat)abstract
- Given a Boolean formula, the problem of counting seeks to estimate the number of solutions of F while the problem of uniform sampling seeks to sample solutions uniformly at random. Counting and uniform sampling are fundamental problems in computer science with a wide range of applications ranging from constrained random simulation, probabilistic inference to network reliability and beyond. The past few years have witnessed the rise of hashing-based approaches that use XOR-based hashing and employ SAT solvers to solve the resulting CNF formulas conjuncted with XOR constraints. Since over 99% of the runtime of hashing-based techniques is spent inside the SAT queries, improving CNF-XOR solvers has emerged as a key challenge. In this paper, we identify the key performance bottlenecks in the recently proposed architecture, and we focus on overcoming these bottlenecks by accelerating the XOR handling within the SAT solver and on improving the solver integration through a smarter use of (partial) solutions. We integrate the resulting system, called, with the state of the art approximate model counter, and the state of the art almost-uniform model sampler. Through an extensive evaluation over a large benchmark set of over 1896 instances, we observe that leads to consistent speed up for both counting and sampling, and in particular, we solve 77 and 51 more instances for counting and sampling respectively.
|
|
| 35. |
|
|
