| 1. |
- Jiang, Xiaoqing, et al.
(författare)
-
A solution-processable copper(II) phthalocyanine derivative as a dopant-free hole-transporting material for efficient and stable carbon counter electrode-based perovskite solar cells
- 2017
-
Ingår i: Journal of Materials Chemistry A. - : Royal Society of Chemistry. - 2050-7488 .- 2050-7496. ; 5:34, s. 17862-17866
-
Tidskriftsartikel (refereegranskat)abstract
- A solution-processable copper(II) phthalocyanine derivative coded as CuPc-TIPS has been synthesized and adopted as a hole-transporting material (HTM) in perovskite solar cells (PSCs), in combination with a mixed-ion perovskite absorber and a low-cost carbon cathode. Optimised PSC devices based on pristine CuPc-TIPS without any additives or dopants show a decent power conversion efficiency of 14.0% (measured at 100 mW cm(-2) illumination, AM 1.5G), together with a good long-termstability under ambient conditions. The present finding highlights the potential of solution-processed copper phthalocyanine derivative-based HTMs for the development of efficient and stable PSCs in the future.
|
|
| 2. |
- Jiang, Xiaoqing, et al.
(författare)
-
Efficient perovskite solar cells employing a solution-processable copper phthalocyanine as a hole-transporting material
- 2017
-
Ingår i: Science China Chemistry. - : Science in China Press. - 1674-7291 .- 1869-1870. ; 60:3, s. 423-430
-
Tidskriftsartikel (refereegranskat)abstract
- The development of alternative low-cost and high-performing hole-transporting materials (HTMs) is of great significance for the potential large-scale application of perovskite solar cells (PSCs) in the future. Here, a facilely synthesized solution-processable copper tetra-(2,4-dimethyl-3-pentoxy) phthalocyanine (CuPc-DMP) via only two simple steps, has been incorporated as a hole-transporting material (HTM) in mesoscopic perovskite solar cells (PSCs). The optimized devices based on such a HTM afford a very competitive power conversion efficiency (PCE) of up to 17.1% measured at 100 mW cm(-2) AM 1.5G irradiation, which is on par with that of the well-known 2,2',7,7'-tetrakis(N,N'-di-p-methoxyphenylamine)-9,9'-spirobifluorene (spiro-OMeTAD) (16.7%) under equivalent conditions. This is, to the best of our knowledge, the highest value reported so far for metal organic complex-based HTMs in PSCs. The advantages of this HTM observed, such as facile synthetic procedure, superior hole transport characteristic, high photovoltaic performance together with the feasibility of tailoring the molecular structure would make solution-processable copper phthalocyanines as a class of promising HTM that can be further explored in PSCs. The present finding highlights the potential application of solution processed metal organic complexes as HTMs for cost-effective and high-performing PSCs.
|
|
| 3. |
- Jiang, Xiaoqing, et al.
(författare)
-
High-Performance Regular Perovskite Solar Cells Employing Low-Cost Poly(ethylenedioxythiophene) as a Hole-Transporting Material
- 2017
-
Ingår i: Scientific Reports. - : Nature Publishing Group. - 2045-2322. ; 7
-
Tidskriftsartikel (refereegranskat)abstract
- Herein, we successfully applied a facile in-situ solid-state synthesis of conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) as a HTM, directly on top of the perovskite layer, in conventional mesoscopic perovskite solar cells (PSCs) (n-i-p structure). The fabrication of the PEDOT film only involved a very simple in-situ solid-state polymerisation step from a monomer 2,5-dibromo-3,4-ethylenedioxythiophene (DBEDOT) made from a commercially available and cheap starting material. The ultraviolet photoelectron spectroscopy (UPS) demonstrated that the as-prepared PEDOT film possesses the highest occupied molecular orbital (HOMO) energy level of -5.5 eV, which facilitates an effective hole extraction from the perovskite absorber as confirmed by the photoluminescence measurements. Optimised PSC devices employing this polymeric HTM in combination with a low-cost vacuum-free carbon cathode (replacing the gold), show an excellent power conversion efficiency (PCE) of 17.0% measured at 100 mW cm(-2) illumination (AM 1.5G), with an open-circuit voltage (V-oc) of 1.05 V, a short-circuit current density (J(sc)) of 23.5 mA/cm(2) and a fill factor (FF) of 0.69, respectively. The present finding highlights the potential application of PEDOT made from solid-state polymerisation as a HTM for cost-effective and highly efficient PSCs.
|
|
| 4. |
- Qu, Jishuang, et al.
(författare)
-
Improved performance and air stability of perovskite solar cells based on low-cost organic hole-transporting material X60 by incorporating its dicationic salt
- 2018
-
Ingår i: Science in China Series B. - : Science Press. - 1674-7291 .- 1869-1870. ; 61:2, s. 172-179
-
Tidskriftsartikel (refereegranskat)abstract
- The development of an efficient, stable, and low-cost hole-transporting material (HTM) is of great significance for perovskite solar cells (PSCs) from future commercialization point of view. Herein, we specifically synthesize a dicationic salt of X60 termed X60(TFSI)(2), and adopt it as an effective and stable "doping" agent to replace the previously used lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) for the low-cost organic HTM X60 in PSCs. The incorporation of this dicationic salt significantly increases the hole conductivity of X60 by two orders of magnitude from 10(-6) to 10(-4) S cm(-1). The dramatic enhancement of the conductivity leads to an impressive power conversion efficiency (PCE) of 19.0% measured at 1 sun illumination (100 mW cm(-2), AM 1.5 G), which is comparable to that of the device doped with LiTFSI (19.3%) under an identical condition. More strikingly, by replacing LiTFSI, the PSC devices incorporating X60(TFSI)(2) also show an excellent long-term durability under ambient atmosphere for 30 days, mainly due to the hydrophobic nature of the X60(TFSI)(2) doped HTM layer, which can effectively prevent the moisture destroying the perovskite layer. The present work paves the way for the development of highly efficient, stable, and low-cost HTM for potential commercialization of PSCs.
|
|
| 5. |
- Wang, Haoxin, et al.
(författare)
-
One plus one greater than two : high-performance inverted planar perovskite solar cells based on a composite CuI/CuSCN hole-transporting layer
- 2018
-
Ingår i: Journal of Materials Chemistry A. - : Royal Society of Chemistry. - 2050-7488 .- 2050-7496. ; 6:43, s. 21435-21444
-
Tidskriftsartikel (refereegranskat)abstract
- The low-cost and stable inorganic p-type semiconductor copper(i) iodide (CuI) is a promising hole-transporting layer (HTL) material for inverted planar perovskite solar cells (PSCs). However, the power conversion efficiencies (PCEs) of inverted planar PSCs based on CuI HTLs reported so far are not satisfactory and far behind those of their organic counterparts. Herein, we demonstrate a simple but effective approach to improve the performance of inverted planar PSCs based on the CuI HTL through the incorporation of copper thiocyanate (CuSCN) into the CuI HTL. As compared to pristine CuI, the introduction of CuSCN significantly improves the quality of the film, resulting in a smooth and uniform film while maintaining relatively high electrical conductivity. As a consequence, the champion device based on the composite CuI/CuSCN HTL affords an impressive PCE of 18.76% under full sun illumination (100 mW cm(-2), AM 1.5G), which is substantially higher than the corresponding values of the respective devices containing pristine CuI (14.53%) and CuSCN (16.66%). This value is one of the highest efficiencies reported thus far for CuI- and CuSCN-based HTLs in PSCs. This work demonstrates the great potential of low-temperature solution-processed CuI/CuSCN composites as hole-selective layers for low-cost and efficient PSCs as well as other optoelectronic devices.
|
|
| 6. |
- Yu, Ze, et al.
(författare)
-
High-efficiency perovskite solar cells employing a conjugated donor-acceptor co-polymer as a hole-transporting material
- 2017
-
Ingår i: RSC Advances. - : ROYAL SOC CHEMISTRY. - 2046-2069. ; 7:44, s. 27189-27197
-
Tidskriftsartikel (refereegranskat)abstract
- In this work, we have successfully introduced 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ) as an efficient p-type dopant for donor-acceptor (D-A) co-polymer poly[2,6-(4,4-bis-(2ethylhexyl)- 4H-cyclopenta[2,1-b; 3,4-b'] dithiophene)-alt-4,7(2,1,3-benzothiadiazole)] (PCPDTBT) as an HTM in mesoscopic perovskite solar cells (PSCs). The bulk conductivity is significantly enhanced by 4 orders of magnitude when PCPDTBT is doped with F4TCNQ (6%, w/w). UV-vis and Fourier transform infrared spectroscopy (FTIR) results indicate the occurrence of p-doping, which results in higher bulk conductivity. The high conductivity leads to an impressive overall efficiency of 15.1%, which is considerably higher than the pristine PCPDTBT based devices (9.2%). The superior performance obtained should be largely attributed to the significant enhancement of the photocurrent density strongly correlated with a more efficient charge collection. This is the highest efficiency reported so far for PCPDTBT-based PSCs. Thus, molecularly p-doping has been demonstrated to be an effective strategy for further improving the performance of a wide range of D-A and other types of polymeric HTMs in PSCs.
|
|
| 7. |
- Zhang, Yuchen, et al.
(författare)
-
Enhanced performance of perovskite solar cells with P3HT hole-transporting materials via molecular p-type doping
- 2016
-
Ingår i: RSC ADVANCES. - : Royal Society of Chemistry. - 2046-2069. ; 6:110, s. 108888-108895
-
Tidskriftsartikel (refereegranskat)abstract
- The conducting polymer poly(3-hexylthiophene-2,5-diyl) (P3HT) has been widely used as a polymeric hole-transporting material (HTM) in inorganic-organic perovskite solar cells (PSCs). However, pristine P3HT-based PSC devices typically exhibit mediocre overall performance, mainly due to its relatively low conductivity. Herein, we successfully introduced tetrafluoro-tetracyano-quinodimethane (F4TCNQ) as an efficient p-type dopant for P3HT as a HTM in mesoscopic PSCs. The overall performance was significantly enhanced after the introduction of F4TCNQ into P3HT. Under an optimal doping condition (1.0%, w/w), an impressive power conversion efficiency (PCE) of 14.4% was achieved, which was considerably higher than the pristine P3HT based devices (10.3%). The dramatic improvement of the PCE originated from the increase of the photocurrent density and fill factor, strongly correlated to the significant increase of the bulk conductivity of F4TCNQ doped P3HT. After doping with 1.0% F4TCNQ, the conductivity of the P3HT film was significantly increased by more than 50 times. UV-Vis and Fourier transform infrared spectroscopy (FTIR) measurements indicated that p-doping occurs via the electron transfer from the highest occupied molecular orbital (HOMO) level of P3HT to the lowest unoccupied molecular orbital (LUMO) level of the F4TCNQ, which led to a substantial increase of the bulk conductivity. Furthermore, PSCs based on the P3HT: F4TCNQ composite as a HTM also exhibited superior long-term stability under ambient conditions with a humidity of 40%. F4TCNQ was thus demonstrated to be an effective p-dopant for P3HT to improve the electrical properties and thereby the overall performance for highly efficient and stable PSCs.
|
|
| 8. |
- Zhao, Chao, et al.
(författare)
-
miRNAs as Regulators of Antidiabetic Effects of Fucoidans
- 2020
-
Ingår i: eFood. - : Atlantis Press. - 2666-3066. ; 1:1, s. 2-11
-
Forskningsöversikt (refereegranskat)abstract
- Diabetes mellitus is a metabolic disease with a high mortality rate worldwide. MicroRNAs (miRNAs), and other small noncoding RNAs, serve as endogenous gene regulators through binding to specific sequences in RNA and modifying gene expression toward up- or down-regulation. miRNAs have become compelling therapeutic targets and play crucial roles in regulating the process of insulin resistance. Fucoidan has shown potential function as an alpha-amylase inhibitor, which may be beneficial in the management of type 2 diabetes mellitus. In recent years, many studies on fucoidan focused on the decrease in blood glucose levels caused by ingesting low-glucose food or glucose-lowering components. However, the importance of miRNAs as regulators of antidiabetic effects was rarely recognized. Hence, this review emphasizes the antidiabetic mechanisms of fucoidan through regulation of miRNAs. Fucoidan exerts a vital antidiabetic effect by regulation of miRNA expression and thus provides a novel biological target for future research.
|
|
