| 1. |
- Leebens-Mack, James H., et al.
(författare)
-
One thousand plant transcriptomes and the phylogenomics of green plants
- 2019
-
Ingår i: Nature. - : Nature Publishing Group. - 0028-0836 .- 1476-4687. ; 574:7780, s. 679-
-
Tidskriftsartikel (refereegranskat)abstract
- Green plants (Viridiplantae) include around 450,000-500,000 species(1,2) of great diversity and have important roles in terrestrial and aquatic ecosystems. Here, as part of the One Thousand Plant Transcriptomes Initiative, we sequenced the vegetative transcriptomes of 1,124 species that span the diversity of plants in a broad sense (Archaeplastida), including green plants (Viridiplantae), glaucophytes (Glaucophyta) and red algae (Rhodophyta). Our analysis provides a robust phylogenomic framework for examining the evolution of green plants. Most inferred species relationships are well supported across multiple species tree and supermatrix analyses, but discordance among plastid and nuclear gene trees at a few important nodes highlights the complexity of plant genome evolution, including polyploidy, periods of rapid speciation, and extinction. Incomplete sorting of ancestral variation, polyploidization and massive expansions of gene families punctuate the evolutionary history of green plants. Notably, we find that large expansions of gene families preceded the origins of green plants, land plants and vascular plants, whereas whole-genome duplications are inferred to have occurred repeatedly throughout the evolution of flowering plants and ferns. The increasing availability of high-quality plant genome sequences and advances in functional genomics are enabling research on genome evolution across the green tree of life.
|
|
| 2. |
- Hou, Xu, et al.
(författare)
-
PDGF-CC blockade inhibits pathological angiogenesis by acting on multiple cellular and molecular targets
- 2010
-
Ingår i: Proceedings of the National Academy of Sciences of the United States of America. - : Proceedings of the National Academy of Sciences. - 0027-8424 .- 1091-6490. ; 107:27, s. 12216-12221
-
Tidskriftsartikel (refereegranskat)abstract
- The importance of identifying VEGF-independent pathways in pathological angiogenesis is increasingly recognized as a result of the emerging drug resistance to anti-VEGF therapies. PDGF-CC is the third member of the PDGF family discovered after more than two decades of studies on PDGF-AA and PDGF-BB. The biological function of PDGF-CC and the underlying cellular and molecular mechanisms remain largely unexplored. Here, using different animal models, we report that PDGF-CC inhibition by neutralizing antibody, shRNA, or genetic deletion suppressed both choroidal and retinal neovascularization. Importantly, we revealed that PDGF-CC targeting acted not only on multiple cell types important for pathological angiogenesis, such as vascular mural and endothelial cells, macrophages, choroidal fibroblasts and retinal pigment epithelial cells, but also on the expression of other important angiogenic genes, such as PDGF-BB and PDGF receptors. At a molecular level, we found that PDGF-CC regulated glycogen synthase kinase (GSK)-3beta phosphorylation and expression both in vitro and in vivo. Activation of GSK3beta impaired PDGF-CC-induced angiogenesis, and inhibition of GSK3beta abolished the antiangiogenic effect of PDGF-CC blockade. Thus, we identified PDGF-CC as an important candidate target gene for antiangiogenic therapy, and PDGF-CC inhibition may be of therapeutic value in treating neovascular diseases.
|
|
| 3. |
- Li, Fay-Wei, et al.
(författare)
-
Horizontal transfer of an adaptive chimeric photoreceptor from bryophytes to ferns
- 2014
-
Ingår i: Proceedings of the National Academy of Sciences of the United States of America. - : Proceedings of the National Academy of Sciences. - 0027-8424 .- 1091-6490. ; 111:18, s. 6672-6677
-
Tidskriftsartikel (refereegranskat)abstract
- Ferns are well known for their shade-dwelling habits. Their ability to thrive under low-light conditions has been linked to the evolution of a novel chimeric photoreceptor-neochrome-that fuses red-sensing phytochrome and blue-sensing phototropin modules into a single gene, thereby optimizing phototropic responses. Despite being implicated in facilitating the diversification of modern ferns, the origin of neochrome has remained a mystery. We present evidence for neochrome in hornworts (a bryophyte lineage) and demonstrate that ferns acquired neochrome from hornworts via horizontal gene transfer (HGT). Fern neochromes are nested within hornwort neochromes in our large-scale phylogenetic reconstructions of phototropin and phytochrome gene families. Divergence date estimates further support the HGT hypothesis, with fern and hornwort neochromes diverging 179 Mya, long after the split between the two plant lineages (at least 400 Mya). By analyzing the draft genome of the hornwort Anthoceros punctatus, we also discovered a previously unidentified phototropin gene that likely represents the ancestral lineage of the neochrome phototropin module. Thus, a neochrome originating in hornworts was transferred horizontally to ferns, where it may have played a significant role in the diversification of modern ferns.
|
|
| 4. |
- Li, K., et al.
(författare)
-
Effect of Ta addition on the fuzz formation of additively manufactured W-based materials
- 2020
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 0029-5515 .- 1741-4326. ; 60:6
-
Tidskriftsartikel (refereegranskat)abstract
- As a divertor plasma-facing material, W will experience high-flux plasma irradiation. In particular, severe surface morphology change like fuzz formation can be induced by He plasma irradiation. In this study, fuzz formation on additively manufactured W and W-Ta was investigated. Rolled W, laser-powder-bed-fused (LPBFed) W and W-Ta were exposed to high flux (similar to 10(23) m(-2) s(-1)) He plasma in the linear plasma generator Magnum-PSI with ion energy 12-13 eV at 1273 K. The mean thickness of the fuzz at grain interiors of rolled W, LPBFed W and W-Ta was measured as 0.37 mu m, 0.71 mu m and 0.23 mu m, respectively. The fuzz suppression in LPBFed W-Ta can be attributed to the synergetic effect of solid-solution, dislocation, and secondary-phase nanoparticles. Abnormally grown fuzz was observed near the pre-existing cracks of LPBFed W, while no such structure was found in LPBFed W-Ta. It is found that dislocations play a crucial role in inhibiting fuzz growth. This is confirmed by the difference in fuzz structure in rolled W and LPBFed W, where rolled W has a much greater dislocation density compared to LPBFed W. This work suggests that the fuzz growth kinetics may be tuned by tailoring the microstructures using the LPBF technique.
|
|
| 5. |
- Li, Wenjie, et al.
(författare)
-
A study on the thermal conversion of scheelite-type ABO(4) into perovskite-type AB(O,N)(3)
- 2015
-
Ingår i: Dalton Transactions. - : Royal Society of Chemistry (RSC). - 1477-9226 .- 1477-9234. ; 44:17, s. 8238-8246
-
Tidskriftsartikel (refereegranskat)abstract
- Phase-pure scheelite AMoO(4) and AWO(4) (A = Ba, Sr, Ca) were thermally treated under an ammonia atmosphere at 400 to 900 degrees C. SrMoO4 and SrWO4 were shown to convert into cubic perovskite SrMoO2N and SrWO1.5N1.5, at 700 degrees C and 900 degrees C respectively, and to form metastable intermediate phases (scheelite SrMoO4-xNx and SrWO4-xNx), as revealed by X-ray diffraction (XRD), elemental analysis and FTIR spectroscopy. High-temperature oxide melt solution calorimetry reveals that the enthalpy of formation for SrM(O,N)(3) (M = Mo, W) perovskites is less negative than that of the corresponding scheelite oxides, though the conversion of the scheelite oxides into perovskite oxynitrides is thermodynamically favorable at moderate temperatures. The reaction of BaMO4 with ammonia leads to the formation of rhombohedral Ba3M2(O,N)(8) and the corresponding binary metal nitrides Mo3N2 and W4.6N4; similar behavior was observed for CaMO4, which converted upon ammonolysis into individual oxides and nitrides. Thus, BaMO4 and CaMO4 were shown to not provide access to perovskite oxynitrides. The influence of the starting scheelite oxide precursor, the structure distortion and the degree of covalency of the B-site-N bond are discussed within the context of the formability of perovskite oxynitrides.
|
|
| 6. |
- Li, Wenjie, et al.
(författare)
-
Synthesis and rapid sintering of dense SrA(O,N)(3) (A = Mo, W) oxynitride ceramics
- 2015
-
Ingår i: Journal of the European Ceramic Society. - : Elsevier BV. - 0955-2219 .- 1873-619X. ; 35:12, s. 3273-3281
-
Tidskriftsartikel (refereegranskat)abstract
- SrMo(O,N)(3) and SrW(O,N)(3) oxynitride powders were synthesized via a solvothermal route followed by ammonolysis. Their rapid densification by spark plasma sintering with a heating rate of 300-400 degrees C/min under a uniaxial pressure of 100 MPa yielded dense monoliths. The lowest open porosity achieved was 0 vol% for SrMo(O,N)(3) and 7.6 vol% for SrW(O,N)(3). The compacted monoliths were characterized by elemental analysis, electron microscopy (SEM, TEM) coupled with energy dispersive X-ray spectroscopy (EDX), as well as X-ray diffraction (XRD). Rietveld refinement of the XRD patterns revealed in the case of the compacted SrMo(O,N)(3) the formation of small amount of ternary oxides (Sr3Mo2O7/SrMoO4/Sr3MoO6), molybdenum nitride (MO2N), as well as metallic Mo. On the contrary, SrW(O,N)(3) exhibited significant decomposition after consolidation, with SrWO4/Sr3WO6 being main components beside SrMo(O,N)(3), accompanied by tungsten nitride (WN) and metallic W. Thus, rapid SPS enables the densification of oxynitrides with high density and acceptable purity that were hardly achieved earlier.
|
|
| 7. |
- Li, Zhijian, et al.
(författare)
-
Systematic exploration of essential yeast gene function with temperature-sensitive mutants.
- 2011
-
Ingår i: Nature biotechnology. - : Springer Science and Business Media LLC. - 1546-1696 .- 1087-0156. ; 29:4, s. 361-7
-
Tidskriftsartikel (refereegranskat)abstract
- Conditional temperature-sensitive (ts) mutations are valuable reagents for studying essential genes in the yeast Saccharomyces cerevisiae. We constructed 787 ts strains, covering 497 (∼45%) of the 1,101 essential yeast genes, with ∼30% of the genes represented by multiple alleles. All of the alleles are integrated into their native genomic locus in the S288C common reference strain and are linked to a kanMX selectable marker, allowing further genetic manipulation by synthetic genetic array (SGA)-based, high-throughput methods. We show two such manipulations: barcoding of 440 strains, which enables chemical-genetic suppression analysis, and the construction of arrays of strains carrying different fluorescent markers of subcellular structure, which enables quantitative analysis of phenotypes using high-content screening. Quantitative analysis of a GFP-tubulin marker identified roles for cohesin and condensin genes in spindle disassembly. This mutant collection should facilitate a wide range of systematic studies aimed at understanding the functions of essential genes.
|
|
| 8. |
- Yang, X., et al.
(författare)
-
Colossal dielectric performance of pure barium titanate ceramics consolidated by spark plasma sintering
- 2016
-
Ingår i: RSC Advances. - : Royal Society of Chemistry (RSC). - 2046-2069. ; 6:79, s. 75422-75429
-
Tidskriftsartikel (refereegranskat)abstract
- A facile sol-gel-hydrothermal method was developed to prepare well-dispersed BaTiO3 (BT) nanocrystals with a size of about 20 nm. By using such nanopowder, dense BT nanoceramics were densified via spark plasma sintering (SPS). Dielectric measurements reveal that pure BT nanoceramics have an extremely high permittivity up to 6 x 10(4) and a low dielectric loss. On the basis of microstructure characterization and dielectric measurement, it was proposed that the polaron dipoles configured by oxygen vacancies and Ti3+ cations within the grains could contribute to the colossal dielectric permittivity of the ceramics. By using the thermally activated polaron hopping model, a large activation energy EA has been determined (0.135 eV) below the Curie temperature, possibly due to the coupling of polaron dipoles and intrinsic ferroelectric dipoles. This simple method offers the possibility to produce pure BT nanoceramics with a colossal permittivity.
|
|
| 9. |
- Zhang, Qing, et al.
(författare)
-
Andersson-Magnéli Phases TinO2n-1 : Recent Progress Inspired by Swedish Scientists
- 2021
-
Ingår i: Zeitschrift für Anorganische und Allgemeines Chemie. - : Wiley. - 0044-2313 .- 1521-3749. ; 647:2-3, s. 126-133
-
Tidskriftsartikel (refereegranskat)abstract
- Among homologous series of metal oxides, Andersson-Magneli phases TinO2n-1 (n=4-10) have attracted renewed scientific attention because of their behaviour in electrical conductivity and chemical/thermal stability. Various applications have also been reported for the phases with different values of n, or slightly reduced rutile (TiO2). The characteristic properties of these materials depend strongly on the compositional deviation from TiO2 and the way in which the structure accommodates the deviation. Thus, an urgent requirement is to overcome difficulties in characterizing such materials at atomic resolution. Here, we trace the discovery of the Andersson-Magneli phases, and report the application of recent developments in electron microscopy to reveal the relation, at the local level, between structural characteristics and electronic states, specifically for the materials TinO2n-1 with n=4-8. The electrical conductivity of Ti4O7 has been reported previously to show three clearly distinct states on decreasing temperature from 300 K. For this reason, we focus on Ti4O7 as a representative example of the TinO2n-1 phases and report structural characteristics at temperatures corresponding to each of the three different phases, focusing on the distribution of Ti3+ and Ti4+ cations from analysis of single-crystal XRD data. Electron diffraction experiments and electrical conductivity measurements are also reported.
|
|
| 10. |
- Zhang, Yinping, et al.
(författare)
-
Ten cities cross-sectional questionnaire survey of children asthma and other allergies in China
- 2013
-
Ingår i: Chinese Science Bulletin. - : Springer Science and Business Media LLC. - 1001-6538 .- 1861-9541. ; 58:34, s. 4182-4189
-
Tidskriftsartikel (refereegranskat)abstract
- Asthma, rhinitis and eczema (allergic or non-allergic) have increased throughout the world during the last decades, especially among children. Changes in the indoor environment are suspected to be important causes. China has experienced a dramatic change in indoor environmental exposures during the past two decades. However, such changes and their associations with children's asthma and other health aspects have not been thoroughly studied. China, Children, Homes, Health (CCHH), Phase I, was a cross-sectional questionnaire survey of 48219 children 1-8 years old in 10 Chinese cities during 2010-2012. The questionnaire includes the International Study of Asthma and Allergies in Childhood (ISAAC) core health questions and additional questions regarding housing, life habits and outdoor environment. In health analyses, children aged 3-6 years old were included. The prevalences of doctor diagnosed asthma varied from 1.7% to 9.8% (mean 6.8%), a large increase from 0.91% in 1999 and 1.50% in 2000. The prevalence of wheeze, rhinitis and atopic eczema (last 12 months) varied from 13.9% to 23.7%, 24.0% to 50.8% and 4.8% to 15.8%, respectively. Taiyuan had the lowest prevalences of all illnesses and Shanghai the highest, except for wheezewhere the highest value was for Urumqi. We found (1) no obvious association between disease prevalences and ambient PM10 concentrations and (2) higher prevalences of disease in humid climates with hot summers and cold winters, but with no centrally heated buildings. Associations between the diseases and economic status as indexed by Gross Domestic Product (GDP) requires further study.
|
|
| 11. |
- An, Di, et al.
(författare)
-
Additive manufacturing and characterization of complex Al2O3 parts based on a novel stereolithography method
- 2017
-
Ingår i: International Journal of Applied Ceramic Technology. - : Wiley. - 1546-542X .- 1744-7402. ; 14:5, s. 836-844
-
Tidskriftsartikel (refereegranskat)abstract
- In this work, we prepared Al2O3 ceramic green parts with complex geometry and architecture using an additive manufacturing process based on stereolithography. The rheological and thermal behavior of Al2O3 slurry was firstly examined and used to establish the conditions for molding and debinding. As opposed to previous researches that only focused on manufacture techniques, the sintering behavior and densification process were systematically investigated. In addition, special attentions were paid to the evolution of microstructure between green bodies and sintered parts. The results showed that debound parts were equipped with uniform particle packing and narrow pore size distribution. The dimensions of the Al2O3 parts changed anisotropically with the different processing steps. The densification process was greatly accelerated by the decrease in pore size and annihilating of interconnected pores in which significant grain growth was observed above 1450 degrees C. The sintered part also had a homogeneous microstructure and no interface between adjacent layers. High densification (relative density of 99.1%) and much desirable Vickers hardness (17.9 GPa) of Al2O3 parts were achieved at the sintering temperature of 1650 degrees C.
|
|
| 12. |
- Bush, Ronald A, et al.
(författare)
-
Preclinical Dose-Escalation Study of Intravitreal AAV-RS1 Gene Therapy in a Mouse Model of X-linked Retinoschisis : Dose-Dependent Expression and Improved Retinal Structure and Function
- 2016
-
Ingår i: Human Gene Therapy. - : Mary Ann Liebert Inc. - 1043-0342 .- 1557-7422. ; 27:5, s. 376-389
-
Tidskriftsartikel (refereegranskat)abstract
- Gene therapy for inherited retinal diseases has been shown to ameliorate functional and structural defects in both animal models and in human clinical trials. X-linked retinoschisis (XLRS) is an early-age onset macular dystrophy resulting from loss of an extracellular matrix protein (RS1). In preparation for a human clinical gene therapy trial, we conducted a dose-range efficacy study of the clinical vector, a self-complementary AAV delivering a human retinoschisin (RS1) gene under control of the RS1 promoter and an interphotoreceptor binding protein enhancer (AAV8-scRS/IRBPhRS), in the retinoschisin knockout (Rs1-KO) mouse. The therapeutic vector at 1 × 10(6) to 2.5 × 10(9) (1E6-2.5E9) vector genomes (vg)/eye or vehicle was administered to one eye of 229 male Rs1-KO mice by intravitreal injection at 22 ± 3 days postnatal age (PN). Analysis of retinal function (dark-adapted electroretinogram, ERG), structure (cavities and outer nuclear layer thickness) by in vivo retinal imaging using optical coherence tomography, and retinal immunohistochemistry (IHC) for RS1 was done 3-4 months and/or 6-9 months postinjection (PI). RS1 IHC staining was dose dependent across doses ≥1E7 vg/eye, and the threshold for significant improvement in all measures of retinal structure and function was 1E8 vg/eye. Higher doses, however, did not produce additional improvement. At all doses showing efficacy, RS1 staining in Rs1-KO mouse was less than that in wild-type mice. Improvement in the ERG and RS1 staining was unchanged or greater at 6-9 months than at 3-4 months PI. This study demonstrates that vitreal administration of AAV8 scRS/IRBPhRS produces significant improvement in retinal structure and function in the mouse model of XLRS over a vector dose range that can be extended to a human trial. It indicates that a fully normal level of RS1 expression is not necessary for a therapeutic effect.
|
|
| 13. |
- Cai, Xiao, et al.
(författare)
-
Propagation of Darrieus-Landau unstable laminar and turbulent expanding flames
- 2021
-
Ingår i: Proceedings of the Combustion Institute. - : Elsevier BV. - 1540-7489. ; 38:2, s. 2013-2021
-
Tidskriftsartikel (refereegranskat)abstract
- The propagation of laminar and turbulent expanding flames subjected to Darrieus-Landau (DL), hydrodynamic instability was experimentally studied by employing stoichiometric H2/O2/N2 flames under quiescent and turbulent conditions performed in a newly developed medium-scale, fan-stirred combustion chamber. In quiescent environment, DL unstable laminar flame exhibits three-stage propagation, i.e. smooth expansion, transition acceleration, and self-similar acceleration. The self-similar acceleration is characterized by a power-law growth of acceleration exponent, α, with normalized Peclet number, which is different from the usually suggested self-similar propagation with a constant α. The imposed turbulence advances the onset of both transition acceleration and self-similar acceleration stages and promotes the strength of flame acceleration as additional wrinkles are invoked by turbulence eddies. A DL-turbulent interaction regime is confirmed to be the classical corrugated flamelets regime. Furthermore, the DL instability significantly facilitates the propagation of expanding flames in medium and even intense turbulence. The development of DL cells is not suppressed by turbulence eddies, and it needs to be considered in turbulent combustion.
|
|
| 14. |
- Chen, Jinhan, et al.
(författare)
-
The effect of hot isostatic pressing on thermal conductivity of additively manufactured pure tungsten
- 2020
-
Ingår i: International journal of refractory metals & hard materials. - : Elsevier BV. - 0263-4368. ; 87
-
Tidskriftsartikel (refereegranskat)abstract
- The crack-healing behaviors and microstructure evolution of pure tungsten produced by laser powder bed fusion (LPBF) were studied and compared before and after post hot isostatic pressing (post-HIP) treatment. An average thermal conductivity of 133 W.m(-1).K-1 at room temperature (RT) was obtained after HIP, which was 16% higher than that of as-built sample (115 W.m(-1).K-1). Although the HIP process had little effect on density, it resulted in a large grain size of > 300 mu m accompanied by a decrease in dislocation density and crack healing, which led to a substantial improvement of thermal conductivity of pure tungsten. The positive correlation between relative density and thermal conductivity of as-built tungsten was reported.
|
|
| 15. |
- de Moraes, Elisangela Guzi, et al.
(författare)
-
Silicon nitride foams from emulsions sintered by rapid intense thermal radiation
- 2015
-
Ingår i: Journal of the European Ceramic Society. - : Elsevier BV. - 0955-2219 .- 1873-619X. ; 35:12, s. 3263-3272
-
Tidskriftsartikel (refereegranskat)abstract
- Open cell Si3N4 foams were fabricated by an emulsification process and subsequent sintering. Emulsification took place in an aqueous environment by using octane as alkane phase and a surfactant as stabilizer. Effects of different octane concentrations (50 vol% and 70 vol%) and stirring velocities (700 rpm and 1000 rpm) on porosity and pore size distribution were investigated. The shaped foams were pressureless sintered at 1600 degrees C inside a modified SPS set-up. Si3N4 foams decorated with SiC nanowires and with an average cell size of 8-41 mu m and total porosity of 80-86 vol% were obtained. The compressive strength ranged from 2.0 MPa up to 9.9 MPa. Both the foaming and sintering processes contributed to the development of different microstructures.
|
|
| 16. |
- He, Qinglong, et al.
(författare)
-
Additive manufacturing of dense zirconia ceramics by fused deposition modeling via screw extrusion
- 2021
-
Ingår i: Journal of the European Ceramic Society. - : Elsevier BV. - 0955-2219 .- 1873-619X. ; 41:1, s. 1033-1040
-
Tidskriftsartikel (refereegranskat)abstract
- A fused deposition modeling(FDM)system via screw extrusion suitable for feeding granular feedstocks with high solid loading was developed. Key parameters included aspect ratio of the screw, the compression ratio and pitch etc. In order to get constant extruded mass flow and wire diameter a processing window was determined by optimizing the barrel temperature, the nozzle diameter and the screwing speed. Microstructural characterization coupled with flexural strength measurement revealed that a higher printing temperature was beneficial to the inter layer bonding. The sintered zirconia ceramic samples with 99% of theoretical density of the 3 mol% yttria stabilized tetragonal zirconia polycrystal (3Y-TZP) and flexural strength of 890 +/- 60 MPa was obtained. A set of zirconia ceramic parts with complex geometries and controllable dimensional accuracy was also successfully prepared for demonstrating the potential of the technique.
|
|
| 17. |
- Li, Duan, et al.
(författare)
-
Dense and strong ZrO2 ceramics fully densified in <15 min
- 2019
-
Ingår i: Advances in Applied Ceramics. - : Informa UK Limited. - 1743-6753 .- 1743-6761. ; 118:1-2, s. 23-29
-
Tidskriftsartikel (refereegranskat)abstract
- Crack-free zirconia ceramics were consolidated via sintering by intense thermal radiation (SITR) approach at 1600–1700°C for 3–5 min. The resulted ceramic bulks can achieve a relative density up to 99.6% with a grain size of 300–1200 nm. Their bending strength, Vickers hardness and indentation toughness values are up to 1244 ± 139 MPa, 13.3 ± 0.3 GPa and 5.5 ± 0.1 MPa m1/2, respectively. Quantitative Raman and XRD analysis show the presence of minor m phase on the natural surface (<7%), fracture surface (<10%) and indentation areas (<15%). It reveals that the SITR method is efficient for rapidly manufacturing zirconia ceramics with desired density, fine grained microstructure and good mechanical properties that are strongly demanded in dental applications.
|
|
| 18. |
|
|
| 19. |
- Li, Duan, et al.
(författare)
-
Densification as an exothermic process revealed by rapid high temperature consolidation of BaTiO3 nanopowder
- 2014
-
Ingår i: Advances in Applied Ceramics. - 1743-6753 .- 1743-6761. ; 113:4, s. 251-256
-
Tidskriftsartikel (refereegranskat)abstract
- Densification is an exothermic process according to the classical sintering theories; however, it has never been explored experimentally. In the present work, such heat release was successfully detected from nanosized BaTiO3 nanopowder compact, which was rapidly consolidated by spark plasma sintering. A reduction of total power consumption was observed immediately when rapid densification occurred. The effects of the deviation of overall electric resistance on total power consumption were analysed. The temperature at which a falling inflection point of the power supply was observed can be used as an indicator of the minimum temperature required for densification. This would be of help for defining the 'kinetic window' for processing of nanoceramics in sintering practice.
|
|
| 20. |
- Li, Dewei, et al.
(författare)
-
Effects of Electromagnetic Swirling Flow in Submerged Entry Nozzle on Square Billet Continuous Casting of Steel Process
- 2013
-
Ingår i: ISIJ International. - : Iron and Steel Institute of Japan. - 0915-1559 .- 1347-5460. ; 53:7, s. 1187-1194
-
Tidskriftsartikel (refereegranskat)abstract
- In this study, a new method for swirling flow generation in submerged entry nozzle (SEN) in continuous casting of steel process has been proposed. A rotating electromagnetic field is set up around the SEN to induce swirling flow in it by the Lorentz force. And this kind of electromagnetic swirling flow in the SEN is proposed to use in square billet continuous casting of steel process. The effects of coil current intensity and nozzle structure on the flow and temperature fields in the SEN and mold are numerically simulated and verified by an electromagnetic swirling model experiment of low melting point alloy. The overall results of the study show that the magnetic flux density and the swirling flow velocity in the SEN increase with the increase of coil current intensity. The largest swirling flow velocity in the SEN can reach about 3 m/s when coil current intensity 500 A, frequency 50 Hz. The electromagnetic swirling flow in the SEN can reduce the impinging depth of the flow and increase the upward flow. An impinging flow near the mold corner can be observed. The flow field changes mentioned above result in a uniform temperature field in the mold, increase the meniscus temperature, effectively increase the temperature at the mold corner. The divergent nozzle used in this new process also reduces the impinging depth, increases the upward flow and makes the meniscus temperature increase significantly.
|
|
| 21. |
- Li, Duan, et al.
(författare)
-
Preparation of nasal cavity-like SiC-Si3N4 foams with a hierarchical pore architecture
- 2015
-
Ingår i: RSC Advances. - : Royal Society of Chemistry (RSC). - 2046-2069. ; 5:35, s. 27891-27900
-
Tidskriftsartikel (refereegranskat)abstract
- Rigid SiC-Si3N4 foams with hierarchical porosity were prepared through protein-based gel-casting followed by radiant sintering in a modified spark plasma sintering (SPS) set-up. The porous bodies sintered at 1500-1700 degrees C for only 10 minutes achieved a compressive strength of 15-21 MPa while keeping a porosity of 60-70 vol%. Gradient porous structures, with pore sizes ranging between 1 to 100 mm, were intersected by the growth of hybrid SiC and Si3N4 nanowires inside the pores resulting in a nasal cavity-like appearance. Gas permeability at room temperature (25 degrees C) and 600 degrees C was evaluated. Darcian permeabilities and non-Darcian permeabilities of all the prepared foams at room temperature fell within (0.354-1.55) x 10(-12) m(2) and (1.60-6.33) x 10(-8) m, respectively. Measurement of the Darcian and non-Darcian permeabilities at 600 degrees C were much higher, at 1.71 x 10(-11) m(2) and 2.68 x 10(-7) m, respectively. The microstructure, stability, gas flow properties and the green synthesis route reveal the potential of these ceramic foams to be used as industrial PM filters for airborne pollutions.
|
|
| 22. |
- Li, Duan, 1987-
(författare)
-
Rapid sintering of ceramics by intense thermal radiation
- 2016
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Sintering is an important processing step for obtaining the necessary mechanical stability and rigidity of ceramic bulk materials. Both mass and heat transfer are essential in the sintering process. The importance of radiation heat transfer is significantly enhanced at high temperatures according to the well-known Stefan-Boltzmann’s law. In this thesis, we modified the pressure-less spark plasma sintering set-up to generate intense thermal radiation, aiming at rapid consolidation of ceramic bulk materials. This approach was named as “Sintering by Intense Thermal Radiation (SITR)” as only thermal radiation contributed.Firstly, the heat and mass transfer mechanisms during the SITR process were studied by choosing zirconia ceramics as references. The results revealed that the multiple scattering and absorption of radiation by the materials contributed to the heat diffusion. The observed enhanced densification and grain growth can be explained by a multiple ordered coalescence of zirconia nanocrystals using high heating rates.Secondly, the temperature distribution during the SITR process was investigated by both numerical simulation and experimental verifications. It showed that the radiator geometry, sample geometry and radiating area were influencing factors. Besides, the change of material and geometry of the radiators resulted in an asymmetric temperature distribution that favored the formation of SiC foams. The foams had gradient structures with different open porosity levels and pore sizes and size distributions.Finally, ceramic bulk materials were successfully fabricated by the SITR method within minutes. These materials included dense and strong ZrO2 ceramics, Si3N4 foams decorated with one-dimensional nanostructures, and nasal cavity-like SiC-Si3N4 foams with hierarchical heterogeneities. Sufficient densification or formed strong necks were used for tailoring these unique microstructures. The SITR approach is well applicable for fast manufacture of ceramic bulk materials because it is clean and requires low energy consumption and properties can be controlled and tuned by selective heating, heating speed or temperature distribution.
|
|
| 23. |
- Li, Duan, et al.
(författare)
-
Rapid sintering of ceramics with gradient porous structure by asymmetric thermal radiation
- 2015
-
Ingår i: Journal of The American Ceramic Society. - : Wiley. - 0002-7820 .- 1551-2916. ; 98:12, s. 3631-3634
-
Tidskriftsartikel (refereegranskat)abstract
- In this study, thermal radiation was employed for sintering silicon carbide foams that achieved a gradient porous structure. The simultaneous use of graphite and carbon fiber reinforced carbon composite (Cf/C) radiators resulted in an axial temperature gradient of ~600°C along the cylindrical sample, as confirmed by both numerical simulation and experimental measurement. By sintering the cylinder top at 1600°C for 5 min, the porous SiC body achieved an axial pore size gradient from ~106 ± 36 μm to ~250 ± 84 μm and an open porosity from 41.4 to 79.8 vol%. This work indicates the potential of sintering by intense thermal radiation technique for rapid manufacturing functionally graded materials through asymmetric assembly of thermal radiators.
|
|
| 24. |
- Li, Duan, et al.
(författare)
-
Rapid sintering of silicon nitride foams decorated with one-dimensional nanostructures by intense thermal radiation
- 2014
-
Ingår i: Science and Technology of Advanced Materials. - : Informa UK Limited. - 1468-6996 .- 1878-5514. ; 15:4
-
Tidskriftsartikel (refereegranskat)abstract
- Silicon nitride foams were prepared by direct foaming and subsequent rapid sintering at 1600 °C. The intense thermal radiation generated under the pressureless spark plasma sintering condition facilitated necking of Si3N4 grains. The prepared foams possessed a porosity of ~80 vol% and a compressive strength of ~10 MPa, which required only ~30 min for the entire sintering processes. Rapid growth of one-dimensional SiC nanowires from the cell walls was also observed. Thermodynamic calculations indicated that the vapor–liquid–solid model is applicable to the formation of SiC nanowires under vacuum.
|
|
| 25. |
|
|
| 26. |
- Li, Duan, et al.
(författare)
-
Sintering by intense thermal radiation (SITR) : A study of temperature distribution by simulation and experiments
- 2015
-
Ingår i: Journal of the European Ceramic Society. - : Elsevier BV. - 0955-2219 .- 1873-619X. ; 35:12, s. 3303-3309
-
Tidskriftsartikel (refereegranskat)abstract
- The modeling and a confirming experimental study of a sintering process by using intense thermal radiation (SITR) is demonstrated. Experiments were conducted in a modified spark plasma sintering set-up for the purpose of rapid consolidation of porous SIC ceramics. A finite element method based software package, COMSOL Multiphysics, was employed to simulate the temperature distributions with two different die geometries. Experimental verifications were performed by sintering of SiC foams and measuring the temperature differences between two fixed points on the die and samples at 1000-1800 degrees C. SiC foams sintered under two geometries with 10 mm' dwell resulted in the formation of grain necks. The compressive strengths are 19.2 +/- 0.7 MPa (65.0 +/- 0.1 vol% porosity) and 15.3 +/- 1.9 MPa (69.0 +/- 0.3 vol% porosity), respectively. The simulation and experimental results showed that the temperature distributions are strongly related to these geometries.
|
|
| 27. |
- Li, Duan, et al.
(författare)
-
Structural study of disordered SiC nanowires by three-dimensional rotation electron diffraction
- 2014
-
Ingår i: Materials Research Express. - : IOP Publishing. - 2053-1591. ; 1:4
-
Tidskriftsartikel (refereegranskat)abstract
- The structure of disordered SiC nanowires was studied by using the three-dimensional rotation electron diffraction (RED) technique. The streaks shown in the RED images indicated the stacking faults of the nanowire. High-resolution transmission electron microscopy imaging was employed to support the results from the RED data. It suggested that a 2H polytype is most possible for the nanowires.
|
|
| 28. |
- Li, Hezhen, et al.
(författare)
-
Asynchronous densification of zirconia ceramics formed by stereolithographic additive manufacturing
- 2021
-
Ingår i: Journal of the European Ceramic Society. - : Elsevier BV. - 0955-2219 .- 1873-619X. ; 41:8, s. 4666-4670
-
Tidskriftsartikel (refereegranskat)abstract
- Stereolithography has been proven as a feasible approach to make crack-free ceramic macrostructure with customized designs, but the microstructure, especially pore structure remains to be tailored more precisely for better performance, where the sintering protocol and related densification characteristics could play a vital role as the slurry preparation and debinding protocol do. Herein we report a phenomenon named “asynchronous densification”, that is, the surface region of zirconia ceramics formed by stereolithographic additive manufacturing would be densified prior to the bulk at 1200°C during the conventional pressureless sintering in air. The cause of this asynchronism is unclear but supposed to be correlated with low packing density, high sintering activity, poor thermal conduction of ceramics and impurities. Early densification of the surface may have negative effects towards ceramic components with more homogeneous microstructure, suppressed pore coalescence and limited grain growth, and therefore needs to be better controlled through optimization in sintering protocol.
|
|
| 29. |
- Li, Hezhen, et al.
(författare)
-
Dental ceramic prostheses by stereolithography-based additive manufacturing : potentials and challenges
- 2019
-
Ingår i: Advances in Applied Ceramics. - : Informa UK Limited. - 1743-6753 .- 1743-6761. ; 118:1-2, s. 30-36
-
Tidskriftsartikel (refereegranskat)abstract
- The current method for making dental ceramic prostheses in a subtractive manner causes a severe waste of materials while requires excessive manual works that bring in the uncertainty for control of quality. The rapid development and commercialisation of additive manufacturing (AM) has aroused interest and wonders both in material and dental communities about their potentials and challenges in fabricating of ceramic prostheses in a materials-saving manner. In this work, AM approach was applied to fabricate the dental bridges and implants made of zirconia. The achieved geometries and dimensional accuracy are used to demonstrate the potential of this technique in fabricating of dental ceramic prostheses, whereas the observed macro and micro defects formed during the treatment process is used to reveal the challenges facing in order to adapt this technology into real dental practice. Suggestions are provided for future development of the technology, particularly on minimising the processing defects.
|
|
| 30. |
- Li, Hezhen, et al.
(författare)
-
Stereolithography-fabricated zirconia dental prostheses : concerns based on clinical requirements
- 2020
-
Ingår i: Advances in Applied Ceramics. - : Informa UK Limited. - 1743-6753 .- 1743-6761. ; 119:5-6, s. 236-243
-
Tidskriftsartikel (refereegranskat)abstract
- With the recent rapid development of the additive manufacturing family of technologies, the interest in application potential of stereolithography on producing ceramic dental prostheses has aroused and been widely discussed. While someone claimed the birth of 'stereolithography-fabricated ceramic dental prostheses', an overall evaluation based on the clinical requirements is lacking, making the optimism a kind of unrealistic. In this article, the prototypes of ceramic dental prostheses and standard specimens produced by the ceramic stereolithography approach are compared with those made by the classic subtractive manufacturing method by following the critical clinical requirements. Concerns on the upcoming challenges and future improvement towards clinical applications are presented that include productivity, delivery time, dimensional tolerance, mechanical and aesthetic properties. It is concluded that it is far too early to call 'stereolithography-fabricated ceramic dental prostheses' as a success as usable and competitive products for clinical applications.
|
|
| 31. |
- Li, Kailun, et al.
(författare)
-
Crack suppression in additively manufactured tungsten by introducing secondary-phase nanoparticles into the matrix
- 2019
-
Ingår i: International journal of refractory metals & hard materials. - : Elsevier BV. - 0263-4368. ; 79, s. 158-163
-
Tidskriftsartikel (refereegranskat)abstract
- In this study, an effective strategy was developed to suppress cracking by introducing secondary-phase ZrC nanoparticles into a tungsten (W) matrix. Pure W and W-0.5wt%ZrC bulks were additively manufactured via the laser powder bed fusion (LPBF) technique, and their cracking behaviour was compared. It was observed that the crack density of W-ZrC was reduced by 88.7% compared with that of pure W. The grains in W-ZrC were obviously refined compared with the grains in pure W, which significantly increased the cracking resistance. In addition, ZrC diminished the oxygen impurities, further increasing the cracking resistance. This study provides a promising strategy for the additive manufacturing of high-quality W by introducing secondary-phase nanoparticles into the metal matrix.
|
|
| 32. |
- Li, Ming, et al.
(författare)
-
Origin(s) of the apparent high permittivity in CaCu3Ti4O12 ceramics: Clarification on the contributions from internal barrier layer capacitor and sample-electrode contact effects
- 2009
-
Ingår i: Journal of Applied Physics. - : AIP Publishing. - 0021-8979 .- 1089-7550. ; 106:10, s. 104106/1-104106/8
-
Tidskriftsartikel (refereegranskat)abstract
- CaCu3Ti4O12 ceramics with a range of resistivities have been prepared using both conventional sintering and spark plasma sintering. For all cases, the high effective permittivity is associated primarily with an internal barrier layer capacitor mechanism. Additional polarization associated with the electrode-sample interface may appear but its visibility depends on the grain boundary resistivity (Rgb) of the ceramic. If the Rgb is large, the electrode polarization is obscured by sample-related effects; if the Rgb is small, a separate impedance associated with the electrode polarization may be seen. Discrepancies in the literature regarding the magnitude and origin of the high effective permittivity are attributed to a combination of differences in processing conditions, electrode contact material and measuring frequency range
|
|
| 33. |
- Li, Rong, et al.
(författare)
-
Three-dimensional trueness and margin quality of monolithic zirconia restorations fabricated by additive 3D gel deposition
- 2020
-
Ingår i: Journal of Prosthodontic Research. - : Japan Prosthodontic Society. - 1883-1958 .- 2212-4632. ; 64:4, s. 478-484
-
Tidskriftsartikel (refereegranskat)abstract
- Purpose: The aim of this in vitro study was to evaluate the three-dimensional trueness and margin quality of monolithic zirconia restorations fabricated by additive 3D gel deposition, compared with those by subtractive milling.Methods: Ten single crowns and ten 4-unit FPDs of different occlusal geometries and margin thickness were fabricated by additive 3D gel deposition (additive group) and subtractive milling (subtractive group). An intraoral scanner was used to digitalize the restorations. 3D deviation analysis was applied and root mean square (RMS) was used to assess the trueness. Margin quality was characterized using optical stereomicroscopy and 3D laser scanning microscopy.Results: For single crowns with shallow fossae and grooves and normal margin, RMS value of additive group and subtractive group showed no significant difference in external surface, while additive group showed higher RMS value in intaglio surface. As for 4-unit FPDs with deep fossae and grooves and thin margin, RMS value of additive group in external surface was significantly lower than that of subtractive group and in intaglio surface there was no significant difference between two groups. With a 0.5 mm chamfer design, single crowns in additive group showed flawless margin with a smooth contour line, whereas minor flaws could be observed in 4-unit FPDs with thin margin. In subtractive group, restorations showed minor flaws or defects of various number and severity.Conclusions: Monolithic zirconia restorations fabricated by additive 3D gel deposition have comparable trueness and better margin quality than those fabricated by subtractive milling. Besides it is more capable of enabling complex geometry.
|
|
| 34. |
- Li, Ting, et al.
(författare)
-
Total genetic contribution assessment across the human genome
- 2021
-
Ingår i: Nature Communications. - : Springer Nature. - 2041-1723. ; 12
-
Tidskriftsartikel (refereegranskat)abstract
- Quantifying the overall magnitude of every single locus' genetic effect on the widely measured human phenome is of great challenge. We introduce a unified modelling technique that can consistently provide a total genetic contribution assessment (TGCA) of a gene or genetic variant without thresholding genetic association signals. Genome-wide TGCA in five UK Biobank phenotype domains highlights loci such as the HLA locus for medical conditions, the bone mineral density locus WNT16 for physical measures, and the skin tanning locus MC1R and smoking behaviour locus CHRNA3 for lifestyle. Tissue-specificity investigation reveals several tissues associated with total genetic contributions, including the brain tissues for mental health. Such associations are driven by tissue-specific gene expressions, which share genetic basis with the total genetic contributions. TGCA can provide a genome-wide atlas for the overall genetic contributions in each particular domain of human complex traits. Quantifying the effects of individual loci on the human phenome is a challenging task. Here, the authors introduce a modelling technique, TGCA, that assesses total genetic contribution per locus and apply this to UK Biobank phenotype domains, revealing top loci and links to tissue-specific gene expression.
|
|
| 35. |
- Lin, Yuan-Hua, et al.
(författare)
-
Electrical transport properties of La2CuO4 ceramics processed by the spark plasma sintering
- 2007
-
Ingår i: Journal of The American Ceramic Society. - : Wiley. - 0002-7820 .- 1551-2916. ; 90:12, s. 4005-4008
-
Tidskriftsartikel (refereegranskat)abstract
- Highly dense La2CuO4 ceramics have been prepared by the spark plasma sintering technique. Temperature dependence of electrical conductivity indicates that La2CuO4 ceramics sintered at over 875 degrees C exhibit a metal-like behavior, which should be ascribed to the special La2CuO4 crystal structure and its correlation splitting of the half-filled d(x2-y2) band. Our experimental data indicate that all of the La2CuO4 samples exhibit positive thermoelectric power in the whole measuring temperature range, indicating that the majority of charge carriers are holes. It is desirable to obtain good thermoelectric performance for this system by optimizing the electrical properties and reducing the thermal conductivity.
|
|
| 36. |
|
|
| 37. |
|
|
| 38. |
- Liu, Leifeng, et al.
(författare)
-
Dislocation network in additive manufactured steel breaks strength-ductility trade-off
- 2018
-
Ingår i: Materials Today. - : Elsevier BV. - 1369-7021 .- 1873-4103. ; 21:4, s. 354-361
-
Tidskriftsartikel (refereegranskat)abstract
- Most mechanisms used for strengthening crystalline materials, e.g. introducing crystalline interfaces, lead to the reduction of ductility. An additive manufacturing process - selective laser melting breaks this trade-off by introducing dislocation network, which produces a stainless steel with both significantly enhanced strength and ductility. Systematic electron microscopy characterization reveals that the pre-existing dislocation network, which maintains its configuration during the entire plastic deformation, is an ideal modulator that is able to slow down but not entirely block the dislocation motion. It also promotes the formation of a high density of nano-twins during plastic deformation. This finding paves the way for developing high performance metals by tailoring the microstructure through additive manufacturing processes.
|
|
| 39. |
- Nan, Beiya, et al.
(författare)
-
Microstructure and Properties of Porous SiC Ceramics Modified by CVI-SiC Nanowires
- 2019
-
Ingår i: Advanced Engineering Materials. - : Wiley. - 1438-1656 .- 1527-2648. ; 21:5
-
Tidskriftsartikel (refereegranskat)abstract
- Sintered porous SiC ceramics are modified with SiC nanowires prepared via chemical vapor infiltration (CVI). SiC nanowires are successfully grown within sintered porous SiC ceramics following vapor-liquid-solid growth. The diameter of the SiC nanowires is in the range of 200 nm-1 mu m, and first decreases with increasing input gas ratio (alpha = 50, 60, 70, and 80) and increases thereafter. The diameter of the nanowires decreases from the surface to the interior areas of the porous SiC ceramics. SiC nanowires effectively improve the mechanical properties of the porous SiC ceramics, and sample Ni-50 has the highest flexural strength of 33.91 MPa and fracture toughness of 0.79 MPa center dot m(1/2), which increases by 90.4% and 49.1% compared to an unmodified sample, respectively. Additionally, the presence of SiC nanowires leads to porous SiC ceramics with altered porosity and microstructure, and higher thermal conductivity. The porous SiC ceramics modified by CVI SiC nanowires satisfy the requirements of gas filtration applications and the pressure drop increases with decreasing apparent porosity. The porous SiC ceramics modified with CVI SiC nanowire has higher permeability than those resulting from the introduction of CVI-SiC matrix or CVD-SiC coating into porous SiC ceramics.
|
|
| 40. |
- Nene, Vishvanath, et al.
(författare)
-
Genome sequence of Aedes aegypti, a major arbovirus vector.
- 2007
-
Ingår i: Science (New York, N.Y.). - : American Association for the Advancement of Science (AAAS). - 1095-9203 .- 0036-8075. ; 316:5832, s. 1718-23
-
Tidskriftsartikel (refereegranskat)abstract
- We present a draft sequence of the genome of Aedes aegypti, the primary vector for yellow fever and dengue fever, which at approximately 1376 million base pairs is about 5 times the size of the genome of the malaria vector Anopheles gambiae. Nearly 50% of the Ae. aegypti genome consists of transposable elements. These contribute to a factor of approximately 4 to 6 increase in average gene length and in sizes of intergenic regions relative to An. gambiae and Drosophila melanogaster. Nonetheless, chromosomal synteny is generally maintained among all three insects, although conservation of orthologous gene order is higher (by a factor of approximately 2) between the mosquito species than between either of them and the fruit fly. An increase in genes encoding odorant binding, cytochrome P450, and cuticle domains relative to An. gambiae suggests that members of these protein families underpin some of the biological differences between the two mosquito species.
|
|
| 41. |
- Olsén, Jon, 1983-, et al.
(författare)
-
Tailoring hierarchical structures in selective laser melted materials
- 2017
-
Ingår i: IOP Conference Series. - : Institute of Physics (IOP).
-
Konferensbidrag (refereegranskat)abstract
- With selective laser melting the potential to manufacture a wide variety of geometries from different materials has presented itself. Interest in this technology keeps growing every year, and with that growth a deeper understanding of the process and resulting materials is urgently needed. In this paper we present a short overview of the structural elements that appear during selective laser melting, and explain how to tailor them to achieve specific structures and material properties. Melt-pools, texture and grains, subgrain cells, and inclusions are the elements discussed herein, and tailoring of these elements can have effects on density, and corrosion resistance, as well as mechanical properties in general.
|
|
| 42. |
- Repetto, Linda, et al.
(författare)
-
Genetic mechanisms of 184 neuro-related proteins in human plasma.
- 2023
-
Ingår i: medRxiv : the preprint server for health sciences. - : Cold Spring Harbor Laboratory.
-
Tidskriftsartikel (övrigt vetenskapligt/konstnärligt)abstract
- Understanding the genetic basis of neuro-related proteins is essential for dissecting the disease etiology of neuropsychiatric disorders and other complex traits and diseases. Here, the SCALLOP Consortium conducted a genome-wide association meta-analysis of over 12,500 individuals for 184 neuro-related proteins in human plasma. The analysis identified 117 cis-regulatory protein quantitative trait loci (cis-pQTL) and 166 trans-pQTL. The mapped pQTL capture on average 50% of each protein's heritability. Mendelian randomization analyses revealed multiple proteins showing potential causal effects on neuro-related traits as well as complex diseases such as hypertension, high cholesterol, immune-related disorders, and psychiatric disorders. Integrating with established drug information, we validated 13 combinations of protein targets and diseases or side effects with available drugs, while suggesting hundreds of re-purposing and new therapeutic targets for diseases and comorbidities. This consortium effort provides a large-scale proteogenomic resource for biomedical research.
|
|
| 43. |
- Repetto, Linda, et al.
(författare)
-
Unraveling Neuro-Proteogenomic Landscape and Therapeutic Implications for Human Behaviors and Psychiatric Disorders.
- 2023
-
Ingår i: Nature Portfolio. - : Research Square Platform LLC.
-
Tidskriftsartikel (övrigt vetenskapligt/konstnärligt)abstract
- Understanding the genetic basis of neuro-related proteins is essential for dissecting the molecular basis of human behavioral traits and the disease etiology of neuropsychiatric disorders. Here, the SCALLOP Consortium conducted a genome-wide association meta-analysis of over 12,500 individuals for 184 neuro-related proteins in human plasma. The analysis identified 117 cis-regulatory protein quantitative trait loci (cis-pQTL) and 166 trans-pQTL. The mapped pQTL capture on average 50% of each protein's heritability. Mendelian randomization analyses revealed multiple proteins showing potential causal effects on neuro-related traits such as sleeping, smoking, feelings, alcohol intake, mental health, and psychiatric disorders. Integrating with established drug information, we validated 13 out of 13 matched combinations of protein targets and diseases or side effects with available drugs, while suggesting hundreds of re-purposing and new therapeutic targets. This consortium effort provides a large-scale proteogenomic resource for biomedical research on human behaviors and other neuro-related phenotypes.
|
|
| 44. |
- Richards, Stephen, et al.
(författare)
-
The genome of the model beetle and pest Tribolium castaneum.
- 2008
-
Ingår i: Nature. - 1476-4687. ; 452:7190, s. 949-55
-
Tidskriftsartikel (refereegranskat)abstract
- Tribolium castaneum is a representative of earth’s most numerous eukaryotic order, a powerful model organism for the study of generalized insect development, and also an important pest of stored agricultural products. We describe its genome sequence here. This omnivorous beetle has evolved an ability to interact with a diverse chemical environment as evidenced by large expansions in odorant and gustatory receptors, as well as p450 and other detoxification enzymes. Developmental patterns in Tribolium are more representative of other arthropods than those found in Drosophila, a fact represented in gene content and function. For one, Tribolium has retained more ancestral genes involved in cell-cell communication than Drosophila, and some are expressed in the growth zone crucial for axial elongation in short germ development. Systemic RNAi in T. castaneum appears to use mechanisms distinct from those found in C. elegans, but nevertheless offers similar power for the elucidation of gene function and identification of targets for selective insect control.
|
|
| 45. |
- Shi, Andi, et al.
(författare)
-
Wear performance of self-glazed zirconia crowns with different amount of occlusal adjustment after 6 months of clinical use
- 2018
-
Ingår i: Advances in Applied Ceramics. - : Informa UK Limited. - 1743-6753 .- 1743-6761. ; 117:8, s. 445-451
-
Tidskriftsartikel (refereegranskat)abstract
- The amount of enamel wear on the antagonist occlusal surfaces caused by self-glazed zirconia crowns was compared with that caused by contralateral natural teeth. Thirteen self-glazed zirconia crowns were placed in situ. The impressions of self-glazed zirconia crowns, their antagonists and the control teeth were taken and scanned at baseline and 6-month follow-up. The patients were divided into two groups, the self-glazed crowns in one group were subjected to a large amount of grinding with well polishing (LaP group, n=7), while the other group required a little amount of grinding with well polishing (LiP group, n=6). Statistics were analysed by two-sided paired Student's t-tests to a significance level of p<.05. The results revealed that the maximum and mean enamel wear significantly different between the antagonists of self-glazed crowns and the control teeth (p<.05). Increased amount of enamel wear was found in LaP group (p<.05). The self-glazed zirconia crowns caused more enamel wear of antagonists than natural teeth after 6 months. Occlusal adjustment and polishing were considered as possible confounders which affected wear behaviour.
|
|
| 46. |
- Wang, Dianzheng, et al.
(författare)
-
Cracking in laser additively manufactured W : Initiation mechanism and a suppression approach by alloying
- 2019
-
Ingår i: Materials & design. - : Elsevier BV. - 0264-1275 .- 1873-4197. ; 162, s. 384-393
-
Tidskriftsartikel (refereegranskat)abstract
- Cracking represents the main challenge for exploiting tungsten in additive manufacturing. In this study, laser powder-bed-fusion technique was applied to additively manufacture tungsten. In the built bulks, the grain boundaries were found to be rich in nanoscale gas pores. On the basis of that, a nanopore segregation induced cracking initiation mechanism was proposed. In order to control cracks, W-6wt.%Ta alloy was produced and the cracking suppression mechanism was investigated. The W-6Ta alloy is characterized by a submicron intragranular cellular structure, which composed large amount of interlocked dislocations as revealed by transmission electron microscopy. Owing to the cellular structure, the nanopores were trapped inside grains, which can reduce the cracking possibility. Moreover, the W-Ta alloy possesses higher strength (by 17%) and higher energy dissipation rate (by 52%) than pure tungsten, which both are beneficial for crack reduction.
|
|
| 47. |
- Wang, Yafei, et al.
(författare)
-
A Data-Driven Scheme for Quantitative Analysis of Texture
- 2020
-
Ingår i: Metallurgical and Materials Transactions. A. - : Springer Science and Business Media LLC. - 1073-5623 .- 1543-1940. ; 51:2, s. 940-950
-
Tidskriftsartikel (refereegranskat)abstract
- Texture is the orientation distribution of crystallites in polycrystalline materials. Given the discrete orientations, Schaeben suggested to adopt statistics for quantitative analysis of texture from discrete orientations, and he also conceived a clustering algorithm to facilitate the applications of statistical methods (H. Schaeben, J Appl Crystal 26:112-121, 1993). This data-driven scheme becomes more urgent and more necessary for the oncoming fourth paradigm: data-intensive scientific discovery, which follows after experimental science, theoretical science, and computational science paradigm. This research adopts a density-based clustering algorithm, DBSCAN, to process the orientation data from an austenitic stainless steel 316 L sample fabricated by selective laser melting. It is validated that the algorithm can robustly identify the orientation cluster (or texture component or preferred orientation). The statistical methods can successfully quantify the features of the identified orientation cluster with quantified uncertainty (statistical significance), which is often lacked in the general method of orientation distribution function. It is believed that this data-driven scheme can be applied to the many aspects of texture analysis.
|
|
| 48. |
- Wang, Yafei, et al.
(författare)
-
Band-Like Distribution of Grains in Selective Laser Melting Track Under Keyhole Mode
- 2019
-
Ingår i: Metallurgical and materials transactions. B, process metallurgy and materials processing science. - : Springer Science and Business Media LLC. - 1073-5615 .- 1543-1916. ; 50:2, s. 1035-1041
-
Tidskriftsartikel (refereegranskat)abstract
- Grain structure in the melt pool under keyhole mode is complex due to complicated solidified conditions, especially in consideration of the intense fluid flow. This paper aims to clarify grain structure and grain growth mechanism in melt pool under keyhole mode in selective laser melting. The microstructure from transverse cross section and longitudinal cross section near the centerline of 316L single tracks was characterized. In the longitudinal cross section, band-like grain structure formed. It is found that fluid flow can refine the grains, and large columnar grains grow towards crystallographic < 110 > direction.
|
|
| 49. |
- Wang, Yafei, et al.
(författare)
-
Construction of Cellular Substructure in Laser Powder Bed Fusion
- 2019
-
Ingår i: Metals. - : MDPI AG. - 2075-4701.
-
Tidskriftsartikel (refereegranskat)abstract
- Cellular substructure has been widely observed in the sample fabricated by laser powder bed fusion, while its growth direction and the crystallographic orientation have seldom been studied. This research tries to build a general model to construct the substructure from its two-dimensional morphology. All the three Bunge Euler angles to specify a unique growth direction are determined, and the crystallographic orientation corresponding to the growth direction is also obtained. Based on the crystallographic orientation, the substructure in the single track of austenitic stainless steel 316L is distinguished between the cell-like dendrite and the cell. It is found that, with the increase of scanning velocity, the substructure transits from cell-like dendrite to cell. When the power is 200 W, the critical growth rate of the transition in the single track can be around 0.31 ms(-1).
|
|
| 50. |
- Wang, Yafei, et al.
(författare)
-
Grain structure and texture of the SLM single track
- 2020
-
Ingår i: Journal of Materials Processing Technology. - : Elsevier BV. - 0924-0136 .- 1873-4774. ; 281
-
Tidskriftsartikel (refereegranskat)abstract
- The grain structure and texture of metal parts fabricated by selective laser melting (SLM) are of interest for their effect on the properties. The study of the SLM single track can reduce the variables to be concerned and, hence, facilitate the understanding of the development of grain and texture in the SLM process. In this work, the austenitic stainless 316L single tracks are fabricated at different scanning speeds, and they are characterized by electron backscattered diffraction (EBSD) from transverse, serial transverse, and longitudinal cross-sections. It is validated that curved grain is common in the SLM single track. The effects of the varied thermal gradient and the shape of the melt pool on competitive growth of grain are analyzed. All the three equivalent < 001 > orientations of the columnar grain are considered, which leads us to put forward a crystallographic feature of a favorable grain during the competitive growth in SLM. Such a crystallographic feature is validated by the texture of the SLM single track, especially the < 001 > // scanning direction (SD) texture.
|
|
