| 1. |
- Guo, Pengzhi, et al.
(författare)
-
Twisted Alkylthiothien-2-yl Flanks and Extended Conjugation Length Synergistically Enhanced Photovoltaic Performance by Boosting Dielectric Constant and Carriers Kinetic Characteristics
- 2021
-
Ingår i: Macromolecular Chemistry and Physics. - : Wiley. - 1022-1352 .- 1521-3935. ; 222:12
-
Tidskriftsartikel (refereegranskat)abstract
- Alternating conjugated polymers (CPs), derived from 2-ethylhexylthiothiophen-2-yl (TS) or 2-ethylhexylthiophen-2-yl (T) flanked dithieno[3,2-d:3,2-d ']benzo[1,2-b:4,5-b ']dithiophene (DTBDT) and diketopyrrolo-pyrrole (DPP) termed as PDTBDT-TS-DPP and PDTBDT-T-DPP, are prepared and characterized. It is found that the PDTBDT-TS-DPP not only exhibits slightly deepening the highest occupied molecular orbital energy levels, and similar absorption, etc., but also presents higher dielectric constant (epsilon(r)) of 6.7 at 1 kHz in contrast to 3.2 for PDTBDT-T-DPP, which are even higher than those of 4.3 and 3.0 for PBDT-TS-DPP/PBDT-T-DPP generated from TS and T flanked benzo[1,2-b:4,5-bMODIFIER LETTER PRIME]dithiophene and DPP. Beyond that, the power conversion efficiency of 8.17% for the inverted photovoltaic devices from DPP-based CPs, is achieved from PDTBDT-TS-DPP. The alkylthio side chains are used in the DTBDT of the larger twisting angles of TS flanks and longer conjugation length, synergistically contribute to the highest dipole moments, and then lead to the enhancement of epsilon(r), thus devoted the modification exciton dissociation and charge carriers kinetic characteristics. To the authors' knowledge, it is the first time to report that epsilon(r) of the CPs is connected with the twisting angle of flanks and conjugation length of the building blocks, besides the use of functional side chains and atoms.
|
|
| 2. |
- Liu, Alei, et al.
(författare)
-
Manipulate Micrometer Surface and Nanometer Bulk Phase Separation Structures in the Active Layer of Organic Solar Cells via Synergy of Ultrasonic and High-Pressure Gas Spraying
- 2019
-
Ingår i: ACS Applied Materials and Interfaces. - : AMER CHEMICAL SOC. - 1944-8244 .- 1944-8252. ; 11:11, s. 10777-10784
-
Tidskriftsartikel (refereegranskat)abstract
- For organic solar cells, the vertical and lateral micro-/nanometer-scale structure in the active layer largely determines the device performance. In this work, the surface and bulk domain size of the photoactive layer are successfully manipulated with a facile two-step spraying method, that is, an ultrathin active layer by high-pressure spraying is deliberately stacked on top of the thick active layer by ultrasonic spraying. Thus, the morphology is effectively optimized with the comprehensive study of optical and electrical characteristics, such as photon absorption, exciton dissociation efficiency, and bimolecular recombination. Moreover, the novel method can be used not only in the fullerene system but also in the nonfullerene system, demonstrating the remarkable universality through this synergy method. This work provides an easy and reliable strategy to improve photovoltaic device performance in the industrial large-area spray-coating process.
|
|
| 3. |
- Yang, Junyu, et al.
(författare)
-
Roll-to-Roll Slot-Die-Printed Polymer Solar Cells by Self-Assembly
- 2018
-
Ingår i: ACS Applied Materials and Interfaces. - : AMER CHEMICAL SOC. - 1944-8244 .- 1944-8252. ; 10:26, s. 22485-22494
-
Tidskriftsartikel (refereegranskat)abstract
- Extremely simplified one-step roll-to-roll slot-die-printed flexible indium tin oxide (ITO)-free polymer solar cells (PSCs) are demonstrated based on the ternary blends of electron-donor polymer thieno[3,4-b]thiophene/benzodithiophene, electron-acceptor fullerene [6,6]-phenyl-C-71-butyric acid methyl ester, and electron-extracting polymer poly[(9,9-bis(3-(N,N-dimethylamino)propyl)-2,7-fluorene)-alt-2,7-(9,9-dioctylfluorene)] (PFN) at room temperature (RT) in ambient air. The flexible ITO-free PSC exhibits a comparable power conversion efficiency (PCE) with the device employing complicated two-step slot-die printing (5.29% vs 5.41%), which indicates that PFN molecules can migrate from the ternary nanocomposite toward the Ag cathode via vertical self-assembly during the one-step slot-die printing process in air. To confirm the migration of PFN, the morphology and elemental analysis as well as charge transport of different active layers are investigated by the in situ transient film drying process, transmission electron microscopy, atomic force microscopy, contact angle and surface energy, X-ray photoelectron spectroscopy, scanning electron microscopy, impedance spectroscopy, transient photovoltage and transient photocurrent, and laser-beam-induced current. Moreover, the good air and mechanical stability of the flexible device with a decent PCE achieved in 1 cm(2) PSCs at RT in air suggests the feasibility of energy-saving and time-saving one-step slot-die printing to large-scale roll-to-roll manufacture in the future.
|
|
