| 1. |
- Arge, Tummas Napoleon, et al.
(författare)
-
Measuring structural inhomogeneity of a helical conjugated polymer at high pressure and temperature
- 2019
-
Ingår i: Journal of Polymer Science, Part B: Polymer Physics. - : Wiley. - 0887-6266. ; 57:7, s. 392-396
-
Tidskriftsartikel (refereegranskat)abstract
- We report on X-ray scattering measurements of helical poly[9,9-bis(2-ethylhexyl)-fluorene-2,7-diyl] by mapping the sample with 10 μm spatial resolution from 0.3 GPa to 36 GPa. We follow the strongest 00l reflection, which moves toward higher scattering angles with pressure indicating planarization of helical polyfluorene. Lateral inhomogeneity is increased for >10 GPa concomitant with the solidification of the pressure transmitting medium (a 4:1 mixture of methanol and ethanol). We also follow the 00l reflection with increasing temperature at the constant pressure of 4.3 GPa in neon. We observe a sharp shift toward higher scattering angles indicative of a phase transition at 167–176 °C.
|
|
| 2. |
- Bykov, Maxim, et al.
(författare)
-
High-Pressure Synthesis of a Nitrogen-Rich Inclusion Compound ReN8·xN2 with Conjugated Polymeric Nitrogen Chains
- 2018
-
Ingår i: Angewandte Chemie International Edition. - : WILEY-V C H VERLAG GMBH. - 1433-7851 .- 1521-3773. ; 57:29, s. 9048-9053
-
Tidskriftsartikel (refereegranskat)abstract
- A nitrogen-rich compound, ReN(8)xN(2), was synthesized by a direct reaction between rhenium and nitrogen at high pressure and high temperature in a laser-heated diamond anvil cell. Single-crystal X-ray diffraction revealed that the crystal structure, which is based on the ReN8 framework, has rectangular-shaped channels that accommodate nitrogen molecules. Thus, despite a very high synthesis pressure, exceeding 100GPa, ReN(8)xN(2) is an inclusion compound. The amount of trapped nitrogen (x) depends on the synthesis conditions. The polydiazenediyl chains [-N=N-] that constitute the framework have not been previously observed in any compound. Abinitio calculations on ReN(8)xN(2) provide strong support for the experimental results and conclusions.
|
|
| 3. |
- Bykov, Maxim, et al.
(författare)
-
High-Pressure Synthesis of Metal-Inorganic Frameworks Hf4N20 center dot N-2, WN8 center dot N-2, and Os5N28 center dot 3 N-2 with Polymeric Nitrogen Linkers
- 2020
-
Ingår i: Angewandte Chemie International Edition. - : WILEY-V C H VERLAG GMBH. - 1433-7851 .- 1521-3773. ; 59:26, s. 10321-10326
-
Tidskriftsartikel (refereegranskat)abstract
- Polynitrides are intrinsically thermodynamically unstable at ambient conditions and require peculiar synthetic approaches. Now, a one-step synthesis of metal-inorganic frameworks Hf4N20 center dot N2, WN 8 center dot N2, and Os5N28 center dot 3N2 via direct reactions between elements in a diamond anvil cell at pressures exceeding 100 GPa is reported. The porous frameworks (Hf4N20, WN 8, and Os5N28) are built from transition-metal atoms linked either by polymeric polydiazenediyl (polyacetylene-like) nitrogen chains or through dinitrogen units. Triply bound dinitrogen molecules occupy channels of these frameworks. Owing to conjugated polydiazenediyl chains, these compounds exhibit metallic properties. The high-pressure reaction between Hf and N2 also leads to a non-centrosymmetric polynitride Hf2N11 that features double-helix catenapoly[tetraz-1-ene-1,4-diyl] nitrogen chains [-N-N-N=N-](infinity.)
|
|
| 4. |
- Bykov, Maxim, et al.
(författare)
-
High-pressure synthesis of ultraincompressible hard rhenium nitride pernitride Re-2(N-2)(N)(2) stable at ambient conditions
- 2019
-
Ingår i: Nature Communications. - : NATURE PUBLISHING GROUP. - 2041-1723. ; 10
-
Tidskriftsartikel (refereegranskat)abstract
- High-pressure synthesis in diamond anvil cells can yield unique compounds with advanced properties, but often they are either unrecoverable at ambient conditions or produced in quantity insufficient for properties characterization. Here we report the synthesis of metallic, ultraincompressible (K-0 = 428(10) GPa), and very hard (nanoindentation hardness 36.7(8) GPa) rhenium nitride pernitride Re-2(N-2)(N)(2). Unlike known transition metals pernitrides Re-2(N-2)(N)(2) contains both pernitride N-2(4-) and discrete N3- anions, which explains its exceptional properties. Re-2(N-2)(N)(2) can be obtained via a reaction between rhenium and nitrogen in a diamond anvil cell at pressures from 40 to 90 GPa and is recoverable at ambient conditions. We develop a route to scale up its synthesis through a reaction between rhenium and ammonium azide, NH4N3, in a large-volume press at 33 GPa. Although metallic bonding is typically seen incompatible with intrinsic hardness, Re-2(N-2)(N)(2) turned to be at a threshold for superhard materials.
|
|
| 5. |
- Dong, Weiwei, et al.
(författare)
-
Fe0.79Si0.07B0.14 metallic glass gaskets for high-pressure research beyond 1 Mbar
- 2022
-
Ingår i: Journal of Synchrotron Radiation. - : Wiley-Blackwell Publishing Ltd. - 0909-0495 .- 1600-5775. ; 29, s. 1167-1179
-
Tidskriftsartikel (refereegranskat)abstract
- A gasket is an important constituent of a diamond anvil cell (DAC) assembly, responsible for the sample chamber stability at extreme conditions for X-ray diffraction studies. In this work, we studied the performance of gaskets made of metallic glass Fe0.79Si0.07B0.14 in a number of high-pressure X-ray diffraction (XRD) experiments in DACs equipped with conventional and toroidal-shape diamond anvils. The experiments were conducted in either axial or radial geometry with X-ray beams of micrometre to sub-micrometre size. We report that Fe0.79Si0.07B0.14 metallic glass gaskets offer a stable sample environment under compression exceeding 1 Mbar in all XRD experiments described here, even in those involving small-molecule gases (e.g. Ne, H-2) used as pressure-transmitting media or in those with laser heating in a DAC. Our results emphasize the materials importance for a great number of delicate experiments conducted under extreme conditions. They indicate that the application of Fe0.79Si0.07B0.14 metallic glass gaskets in XRD experiments for both axial and radial geometries substantially improves various aspects of megabar experiments and, in particular, the signal-to-noise ratio in comparison to that with conventional gaskets made of Re, W, steel or other crystalline metals.
|
|
| 6. |
- Khandarkhaeva, Saiana, et al.
(författare)
-
Structural Diversity of Magnetite and Products of Its Decomposition at Extreme Conditions
- 2022
-
Ingår i: Inorganic Chemistry. - : AMER CHEMICAL SOC. - 0020-1669 .- 1520-510X. ; 61:2, s. 1091-1101
-
Tidskriftsartikel (refereegranskat)abstract
- Magnetite, Fe3O4, is the oldest known magnetic mineral and archetypal mixed-valence oxide. Despite its recognized role in deep Earth processes, the behavior of magnetite at extreme high-pressure high-temperature (HPHT) conditions remains insufficiently studied. Here, we report on single-crystal synchrotron X-ray diffraction experiments up to similar to 80 GPa and 5000 K in diamond anvil cells, which reveal two previously unknown Fe3O4 polymorphs, gamma-Fe3O4 with the orthorhombic Yb3S4-type structure and delta-Fe3O4 with the modified Th3P4-type structure. The latter has never been predicted for iron compounds. The decomposition of Fe3O4 at HPHT conditions was found to result in the formation of exotic phases, Fe5O7 and Fe25O32, with complex structures. Crystal-chemical analysis of iron complex Crystal-chemical analysis oxides suggests the high-spin to low-spin crossover in octahedrally coordinated Fe3+ in the pressure interval between 43 and 51 GPa. Our experiments demonstrate that HPHT conditions promote the formation of ferric-rich Fe-O compounds, thus arguing for the possible involvement of magnetite in the deep oxygen cycle.
|
|
| 7. |
- Khandarkhaeva, Saiana, et al.
(författare)
-
Testing the performance of secondary anvils shaped with focused ion beam from the single-crystal diamond for use in double-stage diamond anvil cells
- 2022
-
Ingår i: Review of Scientific Instruments. - : AIP Publishing. - 0034-6748 .- 1089-7623. ; 93:3
-
Tidskriftsartikel (refereegranskat)abstract
- The success of high-pressure research relies on the inventive design of pressure-generating instruments and materials used for their construction. In this study, the anvils of conical frustum or disk shapes with flat or modified culet profiles (toroidal or beveled) were prepared by milling an Ia-type diamond plate made of a (100)-oriented single crystal using the focused ion beam. Raman spectroscopy and synchrotron x-ray diffraction were applied to evaluate the efficiency of the anvils for pressure multiplication in different modes of operation: as single indenters forced against the primary anvil in diamond anvil cells (DACs) or as pairs of anvils forced together in double-stage DACs (dsDACs). All types of secondary anvils performed well up to about 250 GPa. The pressure multiplication factor of single indenters appeared to be insignificantly dependent on the shape of the anvils and their culets profiles. The enhanced pressure multiplication factor found for pairs of toroidally shaped secondary anvils makes this design very promising for ultrahigh-pressure experiments in dsDACs.
|
|
| 8. |
- Knaapila, Matti, et al.
(författare)
-
Measuring Structural Inhomogeneity of Conjugated Polymer at High Pressures up to 30 GPa
- 2013
-
Ingår i: Macromolecules. - : American Chemical Society (ACS). - 0024-9297 .- 1520-5835. ; 46:20, s. 8284-8288
-
Tidskriftsartikel (refereegranskat)abstract
- We present X-ray scattering data from helical poly[9,9-bis(2-ethylhexyl)-fluorene-2,7-diyl] by mapping the sample with 10 mu m spatial resolution at pressures up to 31 GPa. Neon is used as pressure transmitting medium. Reduction of torsion angle between adjacent repeats is observed during compression and found to be reversible upon decompression. Chain conformation does not depend on lateral position of sample in the pressure range from 1 to 7 GPa but depends significantly when pressure is increased from 7 to 31 GPa. Crystallite orientation does not depend on pressure or lateral position. The radiation damage is studied optically ex situ and proved to be insignificant.
|
|
