| 1. |
- Locke, Adam E, et al.
(författare)
-
Genetic studies of body mass index yield new insights for obesity biology.
- 2015
-
Ingår i: Nature. - : Springer Science and Business Media LLC. - 0028-0836 .- 1476-4687. ; 518:7538, s. 197-401
-
Tidskriftsartikel (refereegranskat)abstract
- Obesity is heritable and predisposes to many diseases. To understand the genetic basis of obesity better, here we conduct a genome-wide association study and Metabochip meta-analysis of body mass index (BMI), a measure commonly used to define obesity and assess adiposity, in up to 339,224 individuals. This analysis identifies 97 BMI-associated loci (P < 5 × 10(-8)), 56 of which are novel. Five loci demonstrate clear evidence of several independent association signals, and many loci have significant effects on other metabolic phenotypes. The 97 loci account for ∼2.7% of BMI variation, and genome-wide estimates suggest that common variation accounts for >20% of BMI variation. Pathway analyses provide strong support for a role of the central nervous system in obesity susceptibility and implicate new genes and pathways, including those related to synaptic function, glutamate signalling, insulin secretion/action, energy metabolism, lipid biology and adipogenesis.
|
|
| 2. |
- Shungin, Dmitry, et al.
(författare)
-
New genetic loci link adipose and insulin biology to body fat distribution.
- 2015
-
Ingår i: Nature. - : Springer Science and Business Media LLC. - 0028-0836 .- 1476-4687. ; 518:7538, s. 187-378
-
Tidskriftsartikel (refereegranskat)abstract
- Body fat distribution is a heritable trait and a well-established predictor of adverse metabolic outcomes, independent of overall adiposity. To increase our understanding of the genetic basis of body fat distribution and its molecular links to cardiometabolic traits, here we conduct genome-wide association meta-analyses of traits related to waist and hip circumferences in up to 224,459 individuals. We identify 49 loci (33 new) associated with waist-to-hip ratio adjusted for body mass index (BMI), and an additional 19 loci newly associated with related waist and hip circumference measures (P < 5 × 10(-8)). In total, 20 of the 49 waist-to-hip ratio adjusted for BMI loci show significant sexual dimorphism, 19 of which display a stronger effect in women. The identified loci were enriched for genes expressed in adipose tissue and for putative regulatory elements in adipocytes. Pathway analyses implicated adipogenesis, angiogenesis, transcriptional regulation and insulin resistance as processes affecting fat distribution, providing insight into potential pathophysiological mechanisms.
|
|
| 3. |
|
|
| 4. |
- Lindström, Stefan B, 1974-
(författare)
-
Lectures on engineering mechanics : statics and dynamics
- 2019
-
Bok (övrigt vetenskapligt/konstnärligt)abstract
- Lectures on Engineering Mechanics: Statics and Dynamics is suitable for Bachelor's level education at schools of engineering with an academic profile. It gives a concise and formal account of the theoretical framework of elementary Engineering Mechanics.A distinguishing feature of this textbook is that its content is consistently structured into postulates, definitions and theorems, with rigorous derivations. The reader finds support in a wealth of illustrations and a cross-reference for each deduction. This textbook underscores the importance of properly drawn free-body diagrams to enhance the problem-solving skills of students.
|
|
| 5. |
- Lindström, Stefan B, 1974-, et al.
(författare)
-
Lectures on Engineering Mechanics : Statics and Dynamics with Exercises
- 2021
-
Bok (övrigt vetenskapligt/konstnärligt)abstract
- Lectures on Engineering Mechanics: Statics and Dynamics with Exercises (SI version) is suitable for Bachelor's level education at schools of engineering with an academic profile. It gives a concise and formal account of the theoretical framework of elementary Engineering Mechanics.A distinguishing feature of this textbook is that its content is consistently structured into postulates, definitions and theorems, with rigorous derivations. The reader finds support in a wealth of illustrations and a cross-reference for each deduction. This textbook includes a comprehensive set of exercises to support the development of problem-solving skills of students.
|
|
| 6. |
- Thörn, Ingrid, 1957-, et al.
(författare)
-
Minimal residual disease assessment in childhood acute lymphoblastic leukemia : Results of a Swedish multi-centre study comparing real-time PCR and multi-colour flow cytometry
- 2009
-
Annan publikation (övrigt vetenskapligt/konstnärligt)abstract
- In this Swedish multi-center study of early treatment response in childhood acute lymphoblastic leukemia (ALL), we evaluated the concordance between multicolour flow cytometry (FCM) and real-time quantitative polymerase chain reaction (RQ-PCR) for assessment of minimal residual disease (MRD). Multiple time points (i.e. day 15, 29, 50 and 106) were evaluated with the NOPHO (Nordic Society of Pediatric Hematology and Oncology) ALL 2000 treatment protocol as backbone. During 2002-2006, 334 children were diagnosed with ALL, where 228 had paired samples taken at any of the four time points. With the detection level of 0.1%, the concordance between RQ-PCR and FCM was 90% in the 726 paired samples analyzed. At day 29, the correlation between the methods was greater with MRD levels >0.1% (rs=0.7, p<0.001) than below (rs=0.2, p=0.024). MRD levels higher than 0.1% at day 29 was a significant predictor of higher risk of having a bone marrow relapse. This was true both for BCP ALL and T-ALL analysed with either FCM or RQ-PCR, although RQ-PCR was a better discriminator than FCM in T-ALL. However, using the NOPHO ALL 2000 protocol, our data indicate that a higher cut-off value (0.2%) should be applied in BCP ALL when using RQ-PCR as MRD method. In contrast, MRD levels ≥ 0.1%, analysed with either method late during induction therapy, was not a predictor of isolated extramedullary relapse. We therefore conclude that MRD assessment by RQ-PCR based IG/TCR rearrangement and multicolour FCM monitoring can be used as a clinical tool if the aim is to find childhood ALL cases with increased risk of having bone marrow relapses.
|
|
| 7. |
- Thörnerup, Ingrid, et al.
(författare)
-
Minimal residual disease assessment in childhood acute lymphoblastic leukaemia: a Swedish multi-centre study comparing real-time polymerase chain reaction and multicolour flow cytometry.
- 2011
-
Ingår i: British Journal of Haematology. - : Wiley. - 0007-1048 .- 1365-2141. ; 152:6, s. 743-753
-
Tidskriftsartikel (refereegranskat)abstract
- Minimal residual disease (MRD) assessment is a powerful prognostic factor for determining the risk of relapse in childhood acute lymphoblastic leukaemia (ALL). In this Swedish multi-centre study of childhood ALL diagnosed between 2002 and 2006, the MRD levels were analysed in 726 follow-up samples in 228 children using real-time quantitative polymerase chain reaction (RQ-PCR) of rearranged immunoglobulin/T-cell receptor genes and multicolour flow cytometry (FCM). Using an MRD threshold of 0·1%, which was the sensitivity level reached in all analyses, the concordance between RQ-PCR and FCM MRD values at day 29 was 84%. In B-cell precursor ALL, an MRD level of ≥0·1% at day 29 predicted a higher risk of bone marrow relapse (BMR) with both methods, although FCM was a better discriminator. However, considering the higher median MRD values achieved with RQ-PCR, a higher MRD cut-off (≥0·2%) improved the predictive capacity of RQ-PCR. In T-ALL, RQ-PCR was notably superior to FCM in predicting risk of BMR. That notwithstanding, MRD levels of ≥0·1%, detected by either method at day 29, could not predict isolated extramedullary relapse. In conclusion, the concordance between RQ-PCR and FCM was high and hence both methods are valuable clinical tools for identifying childhood ALL cases with increased risk of BMR.
|
|
| 8. |
- Wemming, Hannes, 1984-
(författare)
-
Experiments and Modelling of Composite–Aluminium Bolted Joints
- 2022
-
Licentiatavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The aeronautical industry has always strived towards weight-efficient structures since they improve aircraft performance, enable more fuel or payload, reduce cost of manufacturing and operating the aircraft, and reduce the fuel consumption and emissions. Modern airframes are often built in materials with high strength-toweight and stiffness-to-weight ratio, such as aluminium or fibre composites. Fibre composite materials are becoming increasingly common, requiring bolted joints between composite and aluminium parts. Bolted joints are often weak points in the structure, and understanding their mechanical properties in terms of stiffness and strength is of great importance for designing aircraft that are safe to fly. The aim of the research presented in this licentiate thesis is to improve the understanding of shear-loaded, composite–aluminium, bolted joints in terms of structural compliance, deformation, load distribution, strength and failure, by performing experiments and developing simulation models that describe those experiments. Experiments are performed where the optical digital image correlation (DIC) technique is used to measure the deformation of the test specimen surface during quasistatic load application until specimen failure. The DIC method enables more detailed deformation measurements compared to traditional methods. Data processing algorithms for noise reduction of DIC measurement data are developed and the results are used in a novel way to detect beginning bearing damage within the material by observing the specimen surface. The experimental DIC data is used for adapting models, where the goal is to create a structural element that represents a fastener. A structural element is computationally efficient and suitable for implementation in large scale models of airframe structures in an industrial context. A model is proposed and the selection of parameters for this model are investigated. The parameters are identified by fitting to experimental data. This licentiate thesis is divided into two parts, where the first part gives an introduction and background to the research, while the second part consists of two appended papers.
|
|
| 9. |
- Williamson, Alice, et al.
(författare)
-
Genome-wide association study and functional characterization identifies candidate genes for insulin-stimulated glucose uptake
- 2023
-
Ingår i: Nature Genetics. - : Springer Nature. - 1061-4036 .- 1546-1718. ; 55:6, s. 973-983
-
Tidskriftsartikel (refereegranskat)abstract
- Distinct tissue-specific mechanisms mediate insulin action in fasting and postprandial states. Previous genetic studies have largely focused on insulin resistance in the fasting state, where hepatic insulin action dominates. Here we studied genetic variants influencing insulin levels measured 2 h after a glucose challenge in >55,000 participants from three ancestry groups. We identified ten new loci (P < 5 × 10-8) not previously associated with postchallenge insulin resistance, eight of which were shown to share their genetic architecture with type 2 diabetes in colocalization analyses. We investigated candidate genes at a subset of associated loci in cultured cells and identified nine candidate genes newly implicated in the expression or trafficking of GLUT4, the key glucose transporter in postprandial glucose uptake in muscle and fat. By focusing on postprandial insulin resistance, we highlighted the mechanisms of action at type 2 diabetes loci that are not adequately captured by studies of fasting glycemic traits.
|
|
| 10. |
- Acx, A. G., et al.
(författare)
-
Radio Resource Management
- 2000
-
Ingår i: Third generation mobile communication systems. - Boston, Mass : Artech House. - 1580530826 ; , s. 386-
-
Bokkapitel (övrigt vetenskapligt/konstnärligt)
|
|
| 11. |
|
|
| 12. |
|
|
| 13. |
- Alimadadi, Majid, et al.
(författare)
-
Role of microstructures in the compression response of three-dimensional foam-formed wood fiber networks
- 2018
-
Ingår i: Soft Matter. - : ROYAL SOC CHEMISTRY. - 1744-683X .- 1744-6848. ; 14:44, s. 8945-8955
-
Tidskriftsartikel (refereegranskat)abstract
- High-porosity, three-dimensional wood fiber networks made by foam forming present experimentally accessible instances of hierarchically structured, athermal fiber networks. We investigate the large deformation compression behavior of these networks using fiber-resolved finite element analyses to elucidate the role of microstructures in the mechanical response to compression. Three-dimensional network structures are acquired using micro-computed tomography and subsequent skeletonization into a Euclidean graph representation. By using a fitting procedure to the geometrical graph data, we are able to identify nine independent statistical parameters needed for the regeneration of artificial networks with the observed statistics. The compression response of these artificially generated networks and the physical network is then investigated using implicit finite element analysis. A direct comparison of the simulation results from the reconstructed and artificial network reveals remarkable differences already in the elastic region. These can neither be fully explained by density scaling, the size effect nor the boundary conditions. The only factor which provides the consistent explanation of the observed difference is the density and fiber orientation nonuniformities; these contribute to strain-localization so that the network becomes more compliant than expected for statistically uniform microstructures. We also demonstrate that the experimentally manifested strain-stiffening of such networks is due to development of new inter-fiber contacts during compression.
|
|
| 14. |
- Alimadadi, Majid, et al.
(författare)
-
Role of microstructures in the compression response of three-dimensional foam-formed wood fiber networks
- 2018
-
Ingår i: Soft Matter. - 1744-683X .- 1744-6848. ; 14:44, s. 8945-8955
-
Tidskriftsartikel (refereegranskat)abstract
- High-porosity, three-dimensional wood fiber networks made by foam forming present experimentally accessible instances of hierarchically structured, athermal fiber networks. We investigate the large deformation compression behavior of these networks using fiber-resolved finite element analyses to elucidate the role of microstructures in the mechanical response to compression. Three-dimensional network structures are acquired using micro-computed tomography and subsequent skeletonization into a Euclidean graph representation. By using a fitting procedure to the geometrical graph data, we are able to identify nine independent statistical parameters needed for the regeneration of artificial networks with the observed statistics. The compression response of these artificially generated networks and the physical network is then investigated using implicit finite element analysis. A direct comparison of the simulation results from the reconstructed and artificial network reveals remarkable differences already in the elastic region. These can neither be fully explained by density scaling, the size effect nor the boundary conditions. The only factor which provides the consistent explanation of the observed difference is the density and fiber orientation nonuniformities; these contribute to strain-localization so that the network becomes more compliant than expected for statistically uniform microstructures. We also demonstrate that the experimentally manifested strain-stiffening of such networks is due to development of new inter-fiber contacts during compression.
|
|
| 15. |
- Alm Carlsson, Gudrun, et al.
(författare)
-
Monte Carlo metoden : ett verktyg inom strålningsfysiken
- 1995
-
Rapport (övrigt vetenskapligt/konstnärligt)abstract
- Detta kompendium är tänkt att användas som ett propedeutiskt kursmaterial för kursdeltagare i kursen "Monte Carlo simulering av foton- och elektrontransport vid diagnostiska och radioterapeutiska strålkvaliteter". Först följer en kort repetition av den grundläggande statistik som utnyt1jas i beräkningarna. Därefter följer en beskrivning av slumptal. det fundament som metoden bygger på. Vidare beskrivs val ur olika frekvensfunktioner. Valet kan även göras ur så kallade falska fördelningar för att reducera variansen i den skattade storheten. Metoderna belyses i ett avsnitt om problemlösningsmetodik. först i allmänna termer för att sen gå in på ett specifikt problem (Buffons nålproblem) där en analys och strukturering av problemet görs varefter flödesschema och kodning exemplifieras. Så följer två moment där en beskrivning görs av färderna av fotoner respektive elektroner genom materia. För elektronfärderna gör man en indelning i klass 1- och klass II-färder. Vad detta innebär och hur deltapartiklar tas om hand beskrivs i ett kapitel. Till sist kommer en kort introduktion till de tre laborationerna med laborationshandledningar. Speciell vikt har lagts vid att initiera laboranten att fundera på fysiken i de simulerade experimenten. Detta kompendium har tillkommit som examinationsarbete vid en kurs i "Monte Carlo simulering av foton- och elektrontransport vid diagnostiska och radioterapeutiska strålkvaliteter", med andra ord den kurs du själv nu ämnar studera. Författarna önskar dig lycka till med kursen och hoppas att du kommer att få glädje av den. Speciellt hoppas vi att denna skrift ska underlätta för dig att tillgodogöra dig informationen vid föreläsningarna och under laborationerna.
|
|
| 16. |
|
|
| 17. |
|
|
| 18. |
- Andric, Jelena, 1979, et al.
(författare)
-
Description and validation of a flexible fiber model, implemented in a general-purpose CFD code
- 2013
-
Ingår i: Proceedings of the 8th International Conference on Multiphase Flow ICMF 2013, Korea.
-
Konferensbidrag (refereegranskat)abstract
- A flexible fiber model has been implemented in a general purpose open-source computational fluid dynamics code. The fibers are modeled as chains of cylindrical segments. Each segment is tracked individually and their equations of motion account for the hydrodynamic forces and torques from the interaction with the fluid, the elastic bending and twisting torques, and the connectivity forces and moments that ensure the fiber integrity. The segment inertia is taken into account and a one-way coupling with the fluid phase is considered. The model is applied to the rotational motion of an isolated fiber in a low segment Reynolds number shear flow. In the case of a stiff fiber, the computed period of rotation is in good agreement with the one computed using Jeffery's equation for an equivalent spheroid aspect ratio. A qualitative comparison is made with experimental data for flexible fibers. These results show that the implemented model can reproduce the known dynamical behavior of rigid and flexible fibers successfully.
|
|
| 19. |
- Andric, Jelena, 1979, et al.
(författare)
-
Numerical investigation of fiber flocculation in the air flow of an asymmetric diffuser
- 2014
-
Ingår i: Proceedings of the ASME 2014 4th Joint US-European Fluids Engineering Division Summer Meeting and 12th International Conference on Nanochannels, Microchannels and Minichannels, FEDSM 201, August 3-7, Chicago, Illinois, USA..
-
Konferensbidrag (refereegranskat)abstract
- A particle-level rigid fiber model is used to studyflocculation in an asymmetric planar diffuser with a turbulent Newtonian fluid flow, resembling one stage in dry-forming process of pulp mats. The fibers are modeled as chains of rigid cylindrical segments. The equations of motion incorporatehydrodynamic forces and torques from the interaction with thefluid, and the fiber inertia is taken into account. The flow isgoverned by the Reynolds-averaged Navier ̶ Stokes equationswith the standard k-omega turbulence model. A one-waycoupling between the fibers and the flow is considered. Astochastic model is employed for the flow fluctuations tocapture the fiber dispersion. The fibers are assumed to interactthrough short-range attractive forces, causing them to interlockas the fiber-fiber contacts occur during the flow. It is found thatthe formation of fiber flocs is driven by both the turbulenceinduceddispersion and the gradient of the averaged flow field
|
|
| 20. |
- Andric, Jelena, et al.
(författare)
-
Numerical investigation of fiber flocculation in the air flow of an asymmetrical diffuser
- 2014
-
Ingår i: Proceedings of the 12th International Conference on Nanochannels, Microchannels and Minichannels (ICNMM). - : AMER SOC MECHANICAL ENGINEERS. - 9780791846278 ; , s. V001T12A013-
-
Konferensbidrag (refereegranskat)abstract
- A particle-level rigid fiber model is used to study flocculation in an asymmetric planar diffuser with a turbulent Newtonian fluid flow, resembling one stage in dry-forming process of pulp mats. The fibers are modeled as chains of rigid cylindrical segments. The equations of motion incorporate hydrodynamic forces and torques from the interaction with the fluid, and the fiber inertia is taken into account. The flow is governed by the Reynolds-averaged Navier-Stokes equations with the standard k - omega turbulence model. A one-way coupling between the fibers and the flow is considered. A stochastic model is employed for the flow fluctuations to capture the fiber dispersion. The fibers are assumed to interact through short-range attractive forces, causing them to interlock as the fiber-fiber contacts occur during the flow. It is found that the formation of fiber flocs is driven by both the turbulence-induced dispersion and the gradient of the averaged flow field.
|
|
| 21. |
- Antonsson, Stefan, et al.
(författare)
-
Adding lignin derivatives to decrease the effect of mechano-sorptive creep in linerboard
- 2008
-
Ingår i: Appita journal. - 1038-6807. ; 61:6, s. 468-471
-
Tidskriftsartikel (refereegranskat)abstract
- When load is applied to any type of paper while varying the relative humidity, the paper will creep more than if the same load is applied at constant humidity. This behaviour is called mechano-sorptive creep or accelerated creep, and the reasons for its occurrence in paper are still not fully understood. However, wet strength and the addition of apolar (hydrophobic) compounds to sheets have previously been suggested as factors improving the mechano-sorptive creep performance. This work evaluates a method for improving wet strength and tests the addition of a hydrophobic compound, with particular reference to mechano-sorptive creep stiffness. Wet strength was improved by subjecting kraft liner pulp to low-molecular-weight lignin, obtained by cross-flow filtration, and to the radical initiator manganese(III). The hydrophobic compound added was a suberin-like lignin derivative. Adding the suberin-like lignin derivative significantly increased the mechano-sorptive creep stiffness, even though the stiffness at 90% rh decreased in the tested samples. This was probably because of the decrease in hygroexpansion caused by this hydrophobic additive. Even though it is possible significantly to increase the wet strength of kraft liner pulp by adding manganese(III) and cross-flow-filtered lignin, doing so has no significant effect on mechano-sorptive creep stiffness.
|
|
| 22. |
- Antonsson, Stefan, et al.
(författare)
-
Applying a novel cooking technique to produce high kappa number pulps : the effects on physical properties
- 2009
-
Ingår i: Nordic Pulp & Paper Research Journal. - : Walter de Gruyter GmbH. - 0283-2631 .- 2000-0669. ; 24:4, s. 415-420
-
Tidskriftsartikel (refereegranskat)abstract
- A recently developed kraft cooking technique, with a longer impregnation time at lower temperatures to facilitate diffusion over consumption of active cooking chemicals, makes it possible to produce kraftliner pulp without inline refining. This technique was applied to prepare two pulps with different lignin contents, which were compared with two industrial pulps from conventional kraft cooks in order to evaluate the physical properties of the pulps. It was demonstrated that pulps with lower lignin content can increase tensile stiffness, decrease hygroexpansion, and decrease the mechano-sorptive creep of handsheets. However, no difference in SCT and tensile energy absorption values due to different lignin contents was observed. It was further demonstrated that pulps made with Extended Impregnation Cooking (EIC) results in straighter pulp fibres with higher cellulose content. These pulps tended to have lower mechano-sorptive creep than conventional pulps. A higher brightness of the pulp sheets can also be obtained by choosing a higher alkali profile.
|
|
| 23. |
- Antonsson, Stefan, et al.
(författare)
-
Biomimetic synthesis of suberin for new biomaterials
- 2005
-
Ingår i: Appita Annual Conference. ; , s. 561-564
-
Konferensbidrag (refereegranskat)abstract
- Suberin is the biopolymer giving cork (oak bark) its hydrophobic and resistant characteristics. It acts as a diffusion barrier in bark and roots of plants. Similarly to lignin, it is a phenolic polymer with good affinity to cellulose and other wood polysaccharides, but it also contains polyaliphatic and strongly hydrophobic elements. In order to produce a lignin derivative similar to suberin, a desired lignin starting material should be of low molecular weight and have a high content of hydroxylic phenolic groups. By means of cross flow nanofiltration of softwood kraft pulping black liquor and pH-precipitation with diluted sulphuric acid, such a lignin has been obtained. Due to the fact that too much organics entering the recovery boiler frequently is the bottleneck for pulp production increases, a removal of part of the lignin can be economically very favourable. By using this lignin together with linola oil, a linseed oil with a large amount of unsaturated structures, an attempt was made to create a new hydrophobic lignin derivative similar tosuberin. The product was analysed with FT-IR, Fourier Transformed Infra Red Spectroscopy and GPC, Gel Permeation Chromatography. The suberin like material obtained from this lignin could be polymerised on thermo mechanical pulp fibres by means of Mn(III)-driven phenolic coupling. The ability of the suberin monomers to act as a hydrophobic paper coating was evaluated with contact angle measurements and the results indicate that this lignin derivative was potentially of interest due to its capability to interact well with wood fibres and make paper hydrophobic.
|
|
| 24. |
- Antonsson, Stefan, et al.
(författare)
-
Comparison of the physical properties between hardwood and softwood pulps
- 2009
-
Ingår i: Nordic Pulp & Paper Research Journal. - 0283-2631 .- 2000-0669. ; 24:4, s. 409-414
-
Tidskriftsartikel (refereegranskat)abstract
- High mechano-sorptive creep resistance, i.e., good creep resistance in environments with changing relative humidity, is one of the key requirements for linerboards. The aim of this study was to investigate the influence of pulp types and pulp properties on the mechano-sorptive creep of kraftliner. A high-yield softwood, kraftliner pulp, and four different hardwood pulps were investigated. The physical properties of laboratory sheets were evaluated, with emphasis on the mechano-sorptive creep properties.The results showed that the density increase due to increased beating significantly improved the tensile stiffness of all pulps, while its effect on the isocyclic creep stiffness was less pronounced. The hardwood pulps showed higher tensile stiffness, better mechano-sorptive creep properties, and lower hygroexpansion than the softwood pulp at a given density. However, the softwood pulp did exhibit better tensile strength and fracture toughness properties than the hardwood pulps.The results imply that hardwood pulps can be competitive with softwood pulps in kraftliners, provided that their tensile strength and fracture toughness properties can be improved by, for example, chemical means. Furthermore, the isocyclic creep stiffness correlates with the ratio of tensile stiffness to hygroexpansion, indicating that this ratio can be used for engineering estimates of the mechano-sorptive creep performance of paper materials.
|
|
| 25. |
- Antonsson, Stefan, et al.
(författare)
-
Low Mw-lignin fractions together with vegetable oils as available oligomers for novel paper-coating applications as hydrophobic barrier
- 2008
-
Ingår i: Industrial crops and products (Print). - : Elsevier BV. - 0926-6690 .- 1872-633X. ; 27:1, s. 98-103
-
Tidskriftsartikel (refereegranskat)abstract
- Lignin residues are available in large amounts as kraft lignin from chemical pulping processes. This lignin is mainly incinerated in recovery boilers. The recovery boilers are often the bottle-necks in the overall pulping process when pulp production increases are desired. Through cross-flow nano-filtration of the black liquor from kraft pulping, a low-molecular weight lignin fraction can be removed thus decreasing the organic load on the recovery boilers. The low-molecular weight lignin fraction furthermore exhibit different characteristics compared to other commercial kraft lignins and represents a new raw material source in novel applications. The low-molecular weight lignin was used together with a vegetable oil to produce a new hydrophobic lignin derivative similar to suberin. The lignin and the lignin derivative was analysed with FT-IR, UV-vis and SEC. The ability of the product to make paper surfaces hydrophobic was also evaluated. The results demonstrate the possibility to make a suberin-like lignin derivative that is potentially of interest in paper-coating applications due to its capability to interact well with wood fibres and make paper hydrophobic.
|
|
| 26. |
- Antonsson, Stefan, 1979-
(författare)
-
Strategies for improving kraftliner pulp properties
- 2008
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- A large part of the world paper manufacturing consists of production of corrugated board components, kraftliner and fluting, that are used in many different types of corrugated boxes. Because these boxes are stored and transported, they are often subjected to changes in relative humidity. These changes together with mechanical loads will increase the deformation of the boxes compared to the case where the same loads are applied in a static environment. This enlarged creep due to the changes in relative humidity is called mechano-sorptive or accelerated creep. Mechano-sorptive creep forces producers to use high safety factors when designing boxes, and therefore, this is one of the key properties of kraftliner boards. Different strategies to decrease mechano-sorptive creep, and to simultaneously gain more knowledge about the causes for this phenomenon in paper, are the aim of this work. Derivatised and underivatised black liquor lignins, a by-product produced in pulp mills in large quantities, have been used together with biomimetic methods, to modify the properties of kraftliner pulp. Furthermore, the properties of kraftliner pulp have been compared to other pulps in order to evaluate the influence of fibre morphological factors, such as fibre width and shape factor, on the mechano-sorptive creep. In addition the influence of the chemical composition of the kraftliner pulp has been evaluated both by means of treating a kraftliner pulp with chlorite and xylanase and by producing pulps with different chemical composition. By using lignin and biomimetic methods, to create radical coupling reactions, it has been shown that it is possible to increase the wet strength of kraftliner pulp sheets. This method of treating the pulp showed, however, no significant effects on the mechano-sorptive creep. The addition of an apolar suberin-like lignin derivative, which has been shown to be possible to produce from natural resources, did show a positive effect on mechano-sorptive creep properties, but at the expense of stiffness properties in constant climate. Different pulps were compared with a kraftliner pulp and it was observed that the ratio between tensile stiffness and hygroexpansion can be used to estimate the mechano-sorptive creep properties. The hardwood kraft pulps investigated had lower hygroexpansion, probably due to more slender and straighter fibres, and higher tensile stiffness, probably due to lower lignin content. As the lignin content was varied by different methods in kraft pulps, it was observed that increased lignin content gives an increased hygroexpansion and decreased tensile stiffness as well as an increased mechano-sorptive creep. There were also indications of increased mechano-sorptive creep due to higher xylan content.
|
|
| 27. |
- Antonsson, Stefan, et al.
(författare)
-
The influence of lignin and xylan on some kraftliner pulp properties
- 2009
-
Ingår i: Nordic Pulp & Paper Research Journal. - : Walter de Gruyter GmbH. - 0283-2631 .- 2000-0669. ; 24:4, s. 403-408
-
Tidskriftsartikel (refereegranskat)abstract
- This study investigates the influence of lignin and hemicellulose content on the mechanical and physical properties of softwood kraft liner pulp. Tensile properties, hygroexpansion, and mechano-sorptive creep properties were measured. The lignin and hemicellulose contents were modified by chlorite delignification and xylanase treatment. After treatment, the chemical composition of the pulps was 3-14% Klason lignin, 69-77% cellulose, 16-21% hemicellulose, and 4-7% xylan. In the tested pulps, low lignin content tended to decrease hygroexpansion as well as increase tensile stiffness and mechano-sorptive creep stiffness. Xylan contributed less to the pulp sheet properties, but at equal lignin contents, higher xylan content tended to give increased hygroexpansion and worse mechano-sorptive creep properties.
|
|
| 28. |
- Antonsson, Stefan, et al.
(författare)
-
The relationship between hygroexpansion, tensile stiffness, and mechano–sorptive creep in bleached hardwood kraft pulps
- 2010
-
Ingår i: Appita journal. - 1038-6807. ; 63:1, s. 231-
-
Tidskriftsartikel (refereegranskat)abstract
- Hygroexpansion coefficient and tensile stiffness are important parameters in many paper applications. This study compares several bleached industrial hardwood kraft pulps, comprising five eucalypt pulps from South America, Europe, and Africa as well as an acacia pulp from Asia and a birch pulp from Scandinavia. Refined and unrefined pulps are compared. The results indicate significant differences in hygroexpansion but smaller differences in tensile stiffness index at comparable densities. No single factor offering a reasonable explanation of these differences in hygroexpansion coefficient, such as carbohydrate composition, fibre dimensions, or fibre form, was found. However, correlation between hygroexpansion coefficient and the mechano-sorptive creep stiffness was observed. We suggest that the hygroexpansion coefficient at a given tensile stiffness level can be used to rank pulps in terms of their mechano-sorptive creep properties.
|
|
| 29. |
- Antonsson, Stefan, 1979-
(författare)
-
The Use of Lignin Derivatives to Improve Selected Paper Properties
- 2007
-
Licentiatavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Ved består huvudsakligen av tre typer av polymerer, cellulosa, hemicellulosa och lignin. Lignin bildas i naturen genom enzymatiskt initierad oxidativ koppling av tre olika typer av fenylpropan-enheter. Dessa bygger genom olika kol-kol- och kol-syre-bindningar upp en amorf tredimensionell polymer. När kemisk massa tillverkas bryts lignin ner och löses ut i kokluten. Luten innehåller de förbrukade kokkemikalierna och bränns generellt i en sodapanna för att regenerera kemikalierna och producera ånga. Sodapannan är emellertid dyr. Därför har den blivit produktionsbegränsande på många massabruk. Att avlägsna en del av ligninet från avluten vore därför önskvärt och att finna ekonomiskt intressanta produkter baserade på lignin från svartlut är därför ett viktigt forskningsområde . Ett lämpligt område för ligninprodukter vore som tillsatts i oblekt massa. Oblekt massa används till stor del för tillverkning av kraftliner, topp- och bottenskikten på wellpapp. När lådor av wellpapp lagras i containrar som färdas över haven, förändras den relativa luftfuktigheten. Detta gör att lådorna kollapsar lättare än om de skulle ha lagrats vid konstant luftfuktighet, även en hög sådan. Detta är på grund av det så kallade mekanosorptiva- eller accelererade krypfenomenet. Genom tillsatts av våtstyrkemedel till kraftliner eller behandla den med hydrofoba ämnen, finns indikatoner på att mekanosorptiva effekten skulle kunna minska. För att försöka minska den effekten har ett lågmolekylärt kraftlignin, som utvunnits med hjälp av tvärsflödesfiltrering av svartlut och svavelsyrafällning, använts. Genom derivatisering av detta lignin med linolja erhölls ett hydrofobt ligninderivat som uppvisar strukturella likheter med biopolymeren suberin. När detta suberinlika ligninderivat tillsätts till massa verkar det mekanosorptiva krypet minska. När lågmolekylärt lignin används tillsammans med ligninradikalinitiatorerna lackas eller mangan(III) i kraftlinermassa erhålls dessutom en våtstyrka på ca 5% av torrstyrkan. Efter aminering av detta lignin gav en tillsatts till kraftlinermassan en våtstyrka på upp till 10% av torrstyrkan. Det finns indikationer på att det mekanosorptiva krypet samtidigt minskar när dessa behandlingar görs som ger upphov till ökad våtstyrka.
|
|
| 30. |
|
|
| 31. |
- Asplund Persson, Anna, 1966-, et al.
(författare)
-
Cross-talk between adenosine and the oxatriazole derivative GEA 3175 in platelets
- 2005
-
Ingår i: European Journal of Pharmacology. - : Elsevier BV. - 0014-2999 .- 1879-0712. ; 517:3, s. 149-157
-
Tidskriftsartikel (refereegranskat)abstract
- We examined the interplay between adenosine and the nitric oxide (NO)-containing oxatriazole derivative GEA 3175 in human platelets. The importance of cyclic guanosine 3′5′-monophosphate (cGMP)-inhibited phosphodiesterases (PDEs) was elucidated by treating the platelets with adenosine combined with either GEA 3175 or the PDE3-inhibitor milrinone. The drug combinations provoked similar cyclic adenosine 3′5′-monophosphate (cAMP) responses. On the contrary, cGMP levels were increased only in GEA 3175-treated platelets. Both drug combinations reduced P-selectin exposure, platelet adhesion and fibrinogen-binding. However, adenosine together with GEA 3175 was more effective in inhibiting platelet aggregation and ATP release. Thrombin-induced rises in cytosolic Ca2+ were suppressed by the two drug combinations. Adenosine administered with GEA 3175 was, however, more effective in reducing Ca2+ influx.In conclusion, the interaction between adenosine and GEA 3175 involves cGMP-mediated inhibition of PDE3. The results also imply that inhibition of Ca2+ influx represent another cGMP-specific mechanism that enhances the effect of adenosine.
|
|
| 32. |
- Azeez, Ahmed, et al.
(författare)
-
Low Cycle Fatigue Modelling of Steam Turbine Rotor Steel
- 2019
-
Ingår i: 9th International Conference Materials Structure & Micromechanics of Fracture (MSMF9). - : Elsevier. ; , s. 149-154, s. 149-154
-
Konferensbidrag (refereegranskat)abstract
- Materials in steam turbine rotors are subjected to cyclic loads at high temperature, causing cracks to initiate and grow. To allow for more flexible operation, accurate fatigue models for life prediction must not be overly conservative. In this study, fully reversed low cycle fatigue tests were performed on a turbine rotor steel called FB2. The tests were done isothermally, within temperature range of room temperature to 600 °C, under strain control with 0.8-1.2 % total strain range. Some tests included hold time to calibrate the short-time creep behaviour of the material. Different fatigue life models were constructed. The life curve in terms of stress amplitude was found unusable at 600 °C, while the life curve in terms of total strain or inelastic strain amplitudes displayed inconsistent behaviour at 500 °C. To construct better life model, the inelastic strain amplitudes were separated into plastic and creep components by modelling the deformation behaviour of the material, including creep. Based on strain range partitioning approach, the fatigue life depends on different damage mechanisms at different strain ranges. This allowed the formulation of life curves based on plasticity or creep domination, which showed creep domination at 600 °C, while at 500 °C, creep only dominates for higher strain range.
|
|
| 33. |
- Bakker, Henriëtte E, et al.
(författare)
-
Geometry- and rate-dependent adhesive failure of micropatterned surfaces
- 2012
-
Ingår i: Journal of Physics: Condensed Matter. - : IOP Publishing. - 0953-8984 .- 1361-648X. ; 24:6, s. 065103-
-
Tidskriftsartikel (refereegranskat)abstract
- The dynamic nature of adhesive interface failure remains poorly understood, especially when the contact between the two surfaces is localized in microscopic points of adhesion. Here, we explore the dynamic failure of adhesive interfaces composed of a large number of micron-sized pillars against glass. Surprisingly, we find a large influence of the microcontact geometry; ordered arrays of these pillars exhibit significantly stronger adhesive properties than equivalent surfaces in which the pillars are disordered. This can be understood with a simple geometric argument that accounts for the number of adhesive bonds that needs to be broken simultaneously to propagate the crack front. Moreover, the adhesive strength in both cases depends largely on the velocity with which the surfaces are separated. This rate dependence is explained on the basis of a semi-phenomenological model that describes macroscopic failure as a consequence of microscopic bond-rupture events. Our results suggest that the dynamics of adhesive failure, in the limit explored here, is predominantly stress-driven and highly sensitive to local geometry effects.
|
|
| 34. |
- Benediktsdottir, Andrea, et al.
(författare)
-
Design, synthesis, and in vitro biological evaluation of meta-sulfonamidobenzamide-based antibacterial LpxH inhibitors
-
Annan publikation (övrigt vetenskapligt/konstnärligt)abstract
- New antibacterial compounds are urgently needed, especially for infections caused by the top-priority Gram-negative bacteria that are increasingly difficult to treat. Lipid A is a key component of the Gram-negative outer membrane and the LpxH enzyme plays an important role in its biosynthesis, making it an ideal antibacterial target. Inspired by previously reported ortho-N-methyl-sulfonamidobenzamide-based LpxH inhibitors, novel benzamide substitutions were explored in this work to assess their in vitro activity. Our findings reveal that maintaining wild-type antibacterial activity necessitates N-methyl removal when shifting the ortho-N-methyl-sulfonamide to the meta-position. This discovery led to the synthesis of meta-sulfonamidobenzamide analogs with potent antibacterial activity and enzyme inhibition. Moreover, we demonstrate that modifying the benzamide scaffold can alter hERG blocking. Furthermore, a LpxH-bound X-ray structure of the meta-sulfonamidobenzamide analog facilitated comparison with complexes with ortho-N-methyl-sulfonamidobenzamide analogs, and with the natural enzymatic reaction product lipid X, providing new insights into the enzyme-ligand interactions. Overall, our study has identified meta-sulfonamidobenzamide derivatives as promising LpxH-targeting hits with the potential for optimization in future antibacterial hit-to-lead programs.
|
|
| 35. |
- Benselfelt, Tobias, et al.
(författare)
-
Electrochemically Controlled Hydrogels with Electrotunable Permeability and Uniaxial Actuation
- 2023
-
Ingår i: Advanced Materials. - : WILEY-V C H VERLAG GMBH. - 0935-9648 .- 1521-4095. ; 35:45
-
Tidskriftsartikel (refereegranskat)abstract
- The unique properties of hydrogels enable the design of life-like soft intelligent systems. However, stimuli-responsive hydrogels still suffer from limited actuation control. Direct electronic control of electronically conductive hydrogels can solve this challenge and allow direct integration with modern electronic systems. An electrochemically controlled nanowire composite hydrogel with high in-plane conductivity that stimulates a uniaxial electrochemical osmotic expansion is demonstrated. This materials system allows precisely controlled shape-morphing at only -1 V, where capacitive charging of the hydrogel bulk leads to a large uniaxial expansion of up to 300%, caused by the ingress of & AP;700 water molecules per electron-ion pair. The material retains its state when turned off, which is ideal for electrotunable membranes as the inherent coupling between the expansion and mesoporosity enables electronic control of permeability for adaptive separation, fractionation, and distribution. Used as electrochemical osmotic hydrogel actuators, they achieve an electroactive pressure of up to 0.7 MPa (1.4 MPa vs dry) and a work density of & AP;150 kJ m-3 (2 MJ m-3 vs dry). This new materials system paves the way to integrate actuation, sensing, and controlled permeation into advanced soft intelligent systems. The unique properties of hydrogels enable the design of life-like soft intelligent systems. This work demonstrates how the swelling of hydrogels from cellulose nanofibrils and carbon nanotubes can be electrochemically controlled to achieve electrochemical osmotic actuation. This new materials system paves the way for integrated actuation, sensing, and controlled permeation in electrotunable separation membranes or soft actuators.image
|
|
| 36. |
- Benselfelt, Tobias, et al.
(författare)
-
Electrochemically Controlled Hydrogels with Electrotunable Permeability and Uniaxial Actuation
- 2023
-
Ingår i: Advanced Materials. - : Wiley. - 0935-9648 .- 1521-4095. ; 35:45
-
Tidskriftsartikel (refereegranskat)abstract
- The unique properties of hydrogels enable the design of life-like soft intelligent systems. However, stimuli-responsive hydrogels still suffer from limited actuation control. Direct electronic control of electronically conductive hydrogels can solve this challenge and allow direct integration with modern electronic systems. An electrochemically controlled nanowire composite hydrogel with high in-plane conductivity that stimulates a uniaxial electrochemical osmotic expansion is demonstrated. This materials system allows precisely controlled shape-morphing at only −1 V, where capacitive charging of the hydrogel bulk leads to a large uniaxial expansion of up to 300%, caused by the ingress of ≈700 water molecules per electron–ion pair. The material retains its state when turned off, which is ideal for electrotunable membranes as the inherent coupling between the expansion and mesoporosity enables electronic control of permeability for adaptive separation, fractionation, and distribution. Used as electrochemical osmotic hydrogel actuators, they achieve an electroactive pressure of up to 0.7 MPa (1.4 MPa vs dry) and a work density of ≈150 kJ m−3 (2 MJ m−3 vs dry). This new materials system paves the way to integrate actuation, sensing, and controlled permeation into advanced soft intelligent systems.
|
|
| 37. |
- Benselfelt, Tobias, et al.
(författare)
-
Explaining the Exceptional Wet Integrity of Transparent Cellulose Nanofibril Films in the Presence of Multivalent Ions-Suitable Substrates for Biointerfaces
- 2019
-
Ingår i: Advanced Materials Interfaces. - : WILEY. - 2196-7350. ; 6:13
-
Tidskriftsartikel (refereegranskat)abstract
- Cellulose nanofibrils (CNFs) assemble into water-resilient materials in the presence of multivalent counter-ions. The essential mechanisms behind these assemblies are ion-ion correlation and specific ion effects. A network model shows that the interfibril attraction indirectly influences the wet modulus by a fourth power relationship to the solidity of the network (E-w proportional to phi(4)). Ions that induce both ion-ion correlation and specific ion effects significantly reduce the swelling of the films, and due to the nonlinear relationship dramatically increase the wet modulus. Herein, this network model is used to explain the elastoplastic behavior of wet films of 2,2,6,6-tetramethylpiperidine-1-oxyl radical (TEMPO)-oxidized, carboxymethylated, and phosphorylated CNFs in the presence of different counter-ions. The main findings are that the aspect ratio of the CNFs influences the ductility of the assemblies, that the bivalency of phosphorylate ligands probably limits the formation of interfibril complexes with divalent ions, and that a higher charge density increases the friction between fibrils by increasing the short-range attraction from ion-ion correlation and specific ion effects. These findings can be used to rationally design CNF materials for a variety of applications where wet strength, ductility, and transparency are important, such as biomaterials or substrates for bioelectronics.
|
|
| 38. |
|
|
| 39. |
- Berglund, Jennie, et al.
(författare)
-
Wood hemicelluloses exert distinct biomechanical contributions to cellulose fibrillar networks
- 2020
-
Ingår i: Nature Communications. - : Springer Nature. - 2041-1723. ; 11:1
-
Tidskriftsartikel (refereegranskat)abstract
- Hemicelluloses, a family of heterogeneous polysaccharides with complex molecular structures, constitute a fundamental component of lignocellulosic biomass. However, the contribution of each hemicellulose type to the mechanical properties of secondary plant cell walls remains elusive. Here we homogeneously incorporate different combinations of extracted and purified hemicelluloses (xylans and glucomannans) from softwood and hardwood species into self-assembled networks during cellulose biosynthesis in a bacterial model, without altering the morphology and the crystallinity of the cellulose bundles. These composite hydrogels can be therefore envisioned as models of secondary plant cell walls prior to lignification. The incorporated hemicelluloses exhibit both a rigid phase having close interactions with cellulose, together with a flexible phase contributing to the multiscale architecture of the bacterial cellulose hydrogels. The wood hemicelluloses exhibit distinct biomechanical contributions, with glucomannans increasing the elastic modulus in compression, and xylans contributing to a dramatic increase of the elongation at break under tension. These diverging effects cannot be explained solely from the nature of their direct interactions with cellulose, but can be related to the distinct molecular structure of wood xylans and mannans, the multiphase architecture of the hydrogels and the aggregative effects amongst hemicellulose-coated fibrils. Our study contributes to understanding the specific roles of wood xylans and glucomannans in the biomechanical integrity of secondary cell walls in tension and compression and has significance for the development of lignocellulosic materials with controlled assembly and tailored mechanical properties.
|
|
| 40. |
- Bohlin, Markus, et al.
(författare)
-
Statistical Anomaly Detection for Train Fleets
- 2012. - 9
-
Ingår i: Proceedings of the National Conference on Artificial Intelligence, vol. 3, 2012. - Toronto, Canada. - 9781577355687 ; , s. 2217-2223
-
Konferensbidrag (refereegranskat)abstract
- We have developed a method for statistical anomaly detection which has been deployed in a tool for condition monitoring of train fleets. The tool is currently used by several railway operators over the world to inspect and visualize the occurrence of "event messages" generated on the trains. The anomaly detection component helps the operators to quickly find significant deviations from normal behavior and to detect early indications for possible problems. The savings in maintenance costs comes mainly from avoiding costly breakdowns, and have been estimated to several million Euros per year for the tool. In the long run, it is expected that maintenance costs can be reduced with between 5 and 10 % by using the tool.
|
|
| 41. |
|
|
| 42. |
- Brommesson, Peter, et al.
(författare)
-
Assessing intrastate shipments from interstate data and expert opinion
- 2021
-
Ingår i: Royal Society Open Science. - : Royal Society of Open Science. - 2054-5703. ; 8:3
-
Tidskriftsartikel (refereegranskat)abstract
- Live animal shipments are a potential route for transmitting animal diseases between holdings and are crucial when modelling spread of infectious diseases. Yet, complete contact networks are not available in all countries, including the USA. Here, we considered a 10% sample of Interstate Certificate of Veterinary Inspections from 1 year (2009). We focused on distance dependence in contacts and investigated how different functional forms affect estimates of unobserved intrastate shipments. To further enhance our predictions, we included responses from an expert elicitation survey about the proportion of shipments moving intrastate. We used hierarchical Bayesian modelling to estimate parameters describing the kernel and effects of expert data. We considered three functional forms of spatial kernels and the inclusion or exclusion of expert data. The resulting six models were ranked by widely applicable information criterion (WAIC) and deviance information criterion (DIC) and evaluated through within- and out-of-sample validation. We showed that predictions of intrastate shipments were mildly influenced by the functional form of the spatial kernel but kernel shapes that permitted a fat tail at large distances while maintaining a plateau-shaped behaviour at short distances better were preferred. Furthermore, our study showed that expert data may not guarantee enhanced predictions when expert estimates are disparate.
|
|
| 43. |
|
|
| 44. |
- Bäck, Marcus, et al.
(författare)
-
Novel potent macrocyclic inhibitors of the hepatitis C virus NS3 protease : use of cyclopentane and cyclopentene P2-motifs
- 2007
-
Ingår i: Bioorganic & Medicinal Chemistry. - : Elsevier BV. - 0968-0896 .- 1464-3391. ; 15:22, s. 7184-7202
-
Tidskriftsartikel (refereegranskat)abstract
- Several highly potent novel HCV NS3 protease inhibitors have been developed from two inhibitor series containing either a P2 trisubstituted macrocyclic cyclopentane- or a P2 cyclopentene dicarboxylic acid moiety as surrogates for the widely used N-acyl-(4R)-hydroxyproline in the P2 position. These inhibitors were optimized for anti HCV activities through examination of different ring sizes in the macrocyclic systems and further by exploring the effect of P4 substituent removal on potency. The target molecules were synthesized from readily available starting materials, furnishing the inhibitor compounds in good overall yields. It was found that the 14-membered ring system was the most potent in these two series and that the corresponding 13-, 15-, and 16-membered macrocyclic rings delivered less potent inhibitors. Moreover, the corresponding P1 acylsulfonamides had superior potencies over the corresponding P1 carboxylic acids. It is noteworthy that it has been possible to develop highly potent HCV protease inhibitors that altogether lack the P4 substituent. Thus the most potent inhibitor described in this work, inhibitor 20, displays a Ki value of 0.41 nM and an EC50 value of 9 nM in the subgenomic HCV replicon cell model on genotype 1b. To the best of our knowledge this is the first example described in the literature of a HCV protease inhibitor displaying high potency in the replicon assay and lacking the P4 substituent, a finding which should facilitate the development of orally active small molecule inhibitors against the HCV protease.
|
|
| 45. |
|
|
| 46. |
- Carrick, Christopher, et al.
(författare)
-
Lightweight, Highly Compressible, Noncrystalline Cellulose Capsules
- 2014
-
Ingår i: Langmuir. - : American Chemical Society (ACS). - 0743-7463 .- 1520-5827. ; 30:26, s. 7635-7644
-
Tidskriftsartikel (refereegranskat)abstract
- We demonstrate how to prepare extraordinarily deformable, gas-filled, spherical capsules from nonmodified cellulose. These capsules have a low nominal density, ranging from 7.6 to 14.2 kg/m(3), and can be deformed elastically to 70% deformation at 50% relative humidity. No compressive strain-at-break could be detected for these dry cellulose capsules, since they did not rupture even when compressed into a disk with pockets of highly compressed air. A quantitative constitutive model for the large deformation compression of these capsules is derived, including their high-frequency mechanical response and their low-frequency force relaxation, where the latter is governed by the gas barrier properties of the dry capsule. Mechanical testing corroborated these models with good accuracy. Force relaxation measurements at a constant compression rendered an estimate for the gas permeability of air through the capsule wall, calculated to 0.4 mL mu m/m(2) days kPa at 50% relative humidity. These properties taken together open up a large application area for the capsules, and they could most likely be used for applications in compressible, lightweight materials and also constitute excellent model materials for adsorption and adhesion studies.
|
|
| 47. |
- Cortes Ruiz, Maria F., et al.
(författare)
-
Shape-recovering nanocellulose networks : Preparation, characterization and modeling
- 2023
-
Ingår i: Carbohydrate Polymers. - : Elsevier BV. - 0144-8617 .- 1879-1344. ; 315, s. 120950-
-
Tidskriftsartikel (refereegranskat)abstract
- Development of strong cellulose nanofibril (CNF) networks for advanced applications, such as in the biomedical field, is of high importance owing to the biocompatible nature and plant-based origin of cellulose nanofibrils. Nevertheless, lack of mechanical strength and complex synthesis methods hinder the application of these ma-terials in areas where both toughness and manufacturing simplicity are required. In this work, we introduce a facile method for the synthesis of a low solid content (< 2 wt%), covalently crosslinked CNF hydrogel where Poly (N-isopropylacrylamide) (NIPAM) chains are utilized as crosslinks between the nanofibrils. The resulting net-works have the capability to fully recover the shape in which they were formed after various drying and rewetting cycles. Characterization of the hydrogel and its constitutive components was performed using X-ray scattering, rheological investigations and uniaxial testing in compression. Influence of covalent crosslinks was compared with networks crosslinked by the addition of CaCl2. Among other things the results show that the mechanical properties of the hydrogels can be tuned by controlling the ionic strength of the surrounding me-dium. Finally, a mathematical model was developed based on the experimental results, which describes and predicts to a decent degree the large-deformation, elastoplastic behavior, and fracture of these networks.
|
|
| 48. |
- Danielsson, Henrik, Professor, 1974-
(författare)
-
Randomiserade kontrollerade studier av interventionsprogram för elever med tidiga läs- och matematiksvårigheter
- 2023
-
Ingår i: Resultatdialog 2023. - : Vetenskapsrådet. - 9789189845107 ; , s. 15-18
-
Bokkapitel (övrigt vetenskapligt/konstnärligt)abstract
- Forskningens syfte var att utveckla och utvärdera två interventioner för elever med tidiga lässvårigheter eller tidiga mattesvårigheter. Resultaten visade att bägge interventionerna hade en medelstor till stor effekt på förbättring för interventionsgrupperna direkt efter interventionerna. Ett år efter interventionerna hade de flesta av de positiva effekterna minskat till ungefär hälften.
|
|
| 49. |
- Danielsson, Sverker, 1978-
(författare)
-
Xylan reactions in kraft cooking and their influence on paper sheet properties
- 2006
-
Licentiatavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Xylan is the main hemicellulose in birch, eucalyptus, and most other hardwood species. During kraft pulping a series of chemical reactions and physical processes involving xylan take place. The processes studied in this thesis are the following: dissolution, degradation, redeposition onto the fibres, side group conversion, and cleavage of side groups off the xylan back bone. The side group in native xylan consists of methylglucuronic acid, which is mainly converted into hexenuronic acid during kraft cooking. Hexenuronic acid affect the pulp in terms of increased brightness reversion and deteriorated bleachability. The kinetics of the side group cleavage and conversion reactions were analysed using various analytical tools. The study revealed that the most commonly used methods for methylglucuronic acid measurements are not as accurate as has been claimed in the literature. A modification of two of the methods was suggested and evaluated. A common practice used to minimise the hexenuronic acid content involves use of a high cooking temperature. The kinetic study showed that the degree of substitution of pulp xylan is only slightly affected by temperature, and that the observed effects are likely to be more associated with the xylan content of the pulp than with the hexenuronic acid content of the xylan. For the dissolved xylan, however, the degree of substitution showed a high temperature dependency and moreover it was always higher than in the pulp. Xylan itself is known to have the capacity to increase the strength of the manufactured pulp. This knowledge was applied by exchanging cooking liquors between birch kraft cooks, in which a high amount of xylan is dissolved, and spruce cooks, which contain very small amounts of native xylan. This seems like an attractive alternative for softwood kraft cooking, since both the tensile strength and stiffness increased significantly. The magnitude of the strength increase was correlated with the molecular weight of the added xylan and with the increased surface charge of the fibres.
|
|
| 50. |
|
|
