SwePub - search: WFRF:(Liu Yanfeng)

Enumeration	Reference	Cover	Find
1.	Luo, Yang, et al. (author) Three-dimensional and temperature-dependent electronic structure of the heavy-fermion compound CePt2In7 studied by angle-resolved photoemission spectroscopy 2020 In: Physical Review B. - : AMER PHYSICAL SOC. - 2469-9950 .- 2469-9969. ; 101:11 Journal article (peer-reviewed)abstract The three-dimensional and temperature-dependent electronic structures of the heavy-fermion superconductor CePt2In7 are investigated. Angle-resolved photoemission spectroscopy using variable photon energy establishes the existence of quasi-two- and three-dimensional Fermi surface topologies. Temperature-dependent 4d-4f on-resonance photoemission spectroscopies data reveal that heavy quasiparticle bands begin to form at a temperature well above the characteristic (coherence) temperature T+. The emergence of low-lying crystal electric field excitation may be responsible for the "relocalization" or the precursor to the establishment of heavy electrons coherence in heavy-fermion compounds. These findings provide critical insight into understanding the hybridization in heavy-fermion systems.
2.	Xu, Weidong, 1988-, et al. (author) Rational molecular passivation for high-performance perovskite light-emitting diodes 2019 In: Nature Photonics. - : Springer Nature Publishing AG. - 1749-4885 .- 1749-4893. ; 13:6, s. 418-424 Journal article (peer-reviewed)abstract A major efficiency limit for solution-processed perovskite optoelectronic devices, for example light-emitting diodes, is trap-mediated non-radiative losses. Defect passivation using organic molecules has been identified as an attractive approach to tackle this issue. However, implementation of this approach has been hindered by a lack of deep understanding of how the molecular structures influence the effectiveness of passivation. We show that the so far largely ignored hydrogen bonds play a critical role in affecting the passivation. By weakening the hydrogen bonding between the passivating functional moieties and the organic cation featuring in the perovskite, we significantly enhance the interaction with defect sites and minimize non-radiative recombination losses. Consequently, we achieve exceptionally high-performance near-infrared perovskite light-emitting diodes with a record external quantum efficiency of 21.6%. In addition, our passivated perovskite light-emitting diodes maintain a high external quantum efficiency of 20.1% and a wall-plug efficiency of 11.0% at a high current density of 200 mA cm−2, making them more attractive than the most efficient organic and quantum-dot light-emitting diodes at high excitations.
3.	Zhang, Jianyun, et al. (author) Revealing the Critical Role of the HOMO Alignment on Maximizing Current Extraction and Suppressing Energy Loss in Organic Solar Cells 2019 In: iScience. - : Cell Press. - 2589-0042. ; 19, s. 883-893 Journal article (peer-reviewed)abstract For state-of-the-art organic solar cells (OSCs) consisting of a large-bandgap polymer donor and a near-infrared (NIR) molecular acceptor, the control of the HOMO offset is the key to simultaneously achieve small energy loss (Eloss) and high photocurrent. However, the relationship between HOMO offsets and the efficiency for hole separation is quite elusive so far, which requires a comprehensive understanding on how small the driving force can effectively perform the charge separation while obtaining a high photovoltage to ensure high OSC performance. By designing a new family of ZITI-X NIR acceptors (X = S, C, N) with a high structural similarity and matching them with polymer donor J71 forming reduced HOMO offsets, we systematically investigated and established the relationship among the photovoltaic performance, energy loss, and hole-transfer kinetics. We achieved the highest PCEavgs of 14.05 ± 0.21% in a ternary system (J71:ZITI-C:ZITI-N) that best optimize the balance between driving force and energy loss.
4.	Bi, Zhaozhao, et al. (author) Individual nanostructure optimization in donor and acceptor phases to achieve efficient quaternary organic solar cells 2019 In: Nano Energy. - : ELSEVIER. - 2211-2855 .- 2211-3282. ; 66 Journal article (peer-reviewed)abstract Fullerene derivative (PC71BM) and high crystallinity molecule (DR3TBDTT) are employed into PTB7-Th:FOIC based organic solar cells (OSCs) to cooperate an individual nanostructure optimized quaternary blend. PC71BM functions as molecular adjuster and phase modifier promoting FOIC forming "head-to-head" molecular packing and neutralizing the excessive FOIC crystallites. A multi-scale modified morphology is present thanks to the mixture of FOIC and PC71BM while DR3TBDTT disperses into PTB7-Th matrix to reinforce donors crystal-linity and enhance domain purity. Morphology characterization highlights the importance of individually optimizated nanostructures for donor and acceptor, which contributes to efficient hole and electron transport toward improved carrier mobilities and suppressed non-geminated recombination. Therefore, a power conversion efficiency of 13.51% is realized for a quaternary device which is 16% higher than the binary device (PTB7-Th:FOIC). This work demonstrates that utilizing quaternary strategy for simultaneous optimization of donor and acceptor phases is a feasible way to realize high efficient OSCs.
5.	Guo, Yiting, et al. (author) Effect of Side Groups on the Photovoltaic Performance Based on Porphyrin-Perylene Bisimide Electron Acceptors 2018 In: ACS Applied Materials and Interfaces. - : AMER CHEMICAL SOC. - 1944-8244 .- 1944-8252. ; 10:38, s. 32454-32461 Journal article (peer-reviewed)abstract In this work, we developed four porphyrin-based small molecular electron acceptors for non-fullerene organic solar cells, in which different side groups attached to the porphyrin core were selected in order to achieve optimized performance. The molecules contain porphyrin as the core, perylene bisimides as end groups, and the ethynyl unit as the linker. Four side groups, from 2,6-di(dodecyloxy)phenyl to (2-ethylhexyl)thiophen-2-yl, pentadecan-7-yl, and 3,5-di(dodecyloxy)phenyl unit, were applied into the electron acceptors. The new molecules exhibit broad absorption spectra from 300 to 900 nm and high molar extinction coefficients. The molecules as electron acceptors were applied into organic solar cells, showing increased power conversion efficiencies from 1.84 to 5.34%. We employed several techniques, including photoluminescence spectra, electroluminescence spectra, atomic force microscopy, and grazing-incidence wide-angle X-ray to probe the blends to find the effects of the side groups on the photovoltaic properties. We found that the electron acceptors with 2,6-di(dodecyloxy)phenyl units show high-lying frontier energy levels, good crystalline properties, and low nonradiative recombination loss, resulting in possible large phase separation and low energy loss, which is responsible for the low performance. Our results provide a detailed study about the side groups of non-fullerene materials, demonstrating that porphyrin can be used to design electron acceptors toward near-infrared absorption.
6.	Jin, Yingzhi, et al. (author) Laminated Free Standing PEDOT:PSS Electrode for Solution Processed Integrated Photocapacitors via Hydrogen-Bond Interaction 2017 In: ADVANCED MATERIALS INTERFACES. - : WILEY. - 2196-7350. ; 4:23 Journal article (peer-reviewed)abstract In this work, a novel lamination method employing hydrogen-bond interaction to assemble a highly conductive free standing poly(3,4-ethylene dioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) film as a common electrode is demonstrated in a solution processed metal-free foldable integrated photocapacitor (IPC) composed of a monolithic organic solar cell (OSC) and a capacitor. The highlights of the work are:(1) micrometer free standing PEDOT:PSS electrode is successfully laminated onto a relatively large area (1 cm(2)) OSCs; (2) a free standing capacitor based on the PEDOT:PSS electrode is achieved; (3) the IPC demonstrates an overall efficiency of 2% and an energy storage efficiency of 58%, which is comparable with those of IPCs based on metallic common electrodes; (4) the novel lamination method for PEDOT:PSS electrode enables free standing PEDOT:PSS broad applications in solution processed flexible organic electronics, especially tandem or/and integrated organic electronic devices. Furthermore, the IPC is foldable with excellent cycling stability (no decay after 100 recycles at 1 mA cm(-2)). These results indicate that free standing PEDOT:PSS film is a promising candidate as common electrodes for IPCs to break the restrictions of metal electrodes. The demonstrated lamination method will greatly extend the applications of PEDOT:PSS electrodes to large area flexible organic electronic devices.
7.	Liu, Yanfeng, et al. (author) Electric Field Facilitating Hole Transfer in Non-Fullerene Organic Solar Cells with a Negative HOMO Offset 2020 In: The Journal of Physical Chemistry C. - : AMER CHEMICAL SOC. - 1932-7447 .- 1932-7455. ; 124:28, s. 15132-15139 Journal article (peer-reviewed)abstract The record high photoinduced current and power conversion efficiencies of organic solar cells (OSCs) should be attributed to the significant contribution of non-fullerene electron acceptors via hole transfer to electron donors and/or a pronounced decrease in energy losses for exciton dissociation by aligned highest occupied molecular orbitals (HOMOs) or lowest unoccupied molecular orbitals (LUMOs). However, the hole transfer mechanism in those highly efficient non-fullerene OSCs with small HOMO offsets has not been extensively studied and fully understood, yet. Herein, we comparatively study the hole transfer kinetics in two OSCs with a positive (0.05 eV) and a negative (-0.07 eV) HOMO offset (Delta HOMO) based on polymer donor PTQ10 paired with non-fullerene acceptors ZITI-C or ZITI-N. Short-circuit current densities (J(sc)) of 20.42 and 12.81 mA cm(-2) are achieved in the OSCs based on PTQ10:ZITI-C (Delta HOMO = 0.05 eV) and PTQ10:ZITI-N (Delta HOMO = -0.07 eV) with an optimized donor (D):acceptor (A) ratio of 1:1, respectively, despite the small and even negative Delta HOMO. Results from time-resolved transient absorption spectroscopy show slower hole transfer (14.3 ps) in PTQ10:ZITI-N than that (3.7 ps) in PTQ10:ZITI-C. To understand the decent J(sc) value in the OSCs of PTQ10:ZITI-N, the temperature and electric field dependences of hole transfer are investigated in low-donor-content OSCs (D:A ratio of 1:9) in which photocurrent is dominated by the contribution via hole transfer from ZITI-N to PTQ10. Devices based on PTQ10:ZITI-C and PTQ10:ZITI-N show similar free charge generation behavior as a function of temperature, whereas the external quantum efficiencies of the PTQ10:ZITI-N device exhibit a much stronger bias dependence than that of PTQ10:ZITI-C, which suggests that the electric field facilitates exciton dissociation in PTQ10:ZITI-N where the energetic driving force alone cannot efficiently dissociate excitons.
8.	Liu, Yanfeng, et al. (author) In Situ Optical Spectroscopy Demonstrates the Effect of Solvent Additive in the Formation of All-Polymer Solar Cells 2022 In: The Journal of Physical Chemistry Letters. - : American Chemical Society (ACS). - 1948-7185. ; 13:50, s. 11696-11702 Journal article (peer-reviewed)abstract 1-Chloronaphthalene (CN) has been a common solvent additive in both fullerene- A nd nonfullerene-based organic solar cells. In spite of this, its working mechanism is seldom investigated, in particular, during the drying process of bulk heterojunctions composed of a donor:acceptor mixture. In this work, the role of CN in all-polymer solar cells is investigated by in situ spectroscopies and ex situ characterization of blade-coated PBDB-T:PF5-Y5 blends. Our results suggest that the added CN promotes self-aggregation of polymer donor PBDB-T during the drying process of the blend film, resulting in enhanced crystallinity and hole mobility, which contribute to the increased fill factor and improved performance of PBDB-T:PF5-Y5 solar cells. Besides, the nonradiative energy loss of the corresponding device is also reduced by the addition of CN, corresponding to a slightly increased open-circuit voltage. Overall, our observations deepen our understanding of the drying dynamics, which may guide further development of all-polymer solar cells.
9.	Liu, Yanfeng, et al. (author) Mo1.33C MXene-Assisted PEDOT:PSS Hole Transport Layer for High-Performance Bulk-Heterojunction Polymer Solar Cells 2020 In: ACS APPLIED ELECTRONIC MATERIALS. - : AMER CHEMICAL SOC. - 2637-6113. ; 2:1, s. 163-169 Journal article (peer-reviewed)abstract Here, we report the usage of two-dimensional MXene, Mo1.33C-assisted poly(3,4-ethylene dioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) as an efficient hole transport layer (HTL) to construct high-efficiency polymer solar cells. The composite HTLs are prepared by mixing Mo1.33C and PEDOT:PSS aqueous solution. The conventional devices based on Mo1.33C:PEDOT:PSS exhibit an average power conversion efficiency (PCE) of 9.2%, which shows a 13% enhancement compared to the reference devices. According to the results from hole mobilities, charge extraction probabilities, steady-state photoluminescence, and atomic force microscopy, the enhanced PCE can be ascribed to the improved charge transport and extraction properties of the HTL, along with the morphological improvement of the active layer on top. This work clearly demonstrates the feasibility to combine advantages of Mo1.33C MXene and PEDOT:PSS as the promising HTL in organic photovoltaics.
10.	Nie, Shisong, et al. (author) High Conductivity, Semiconducting, and Metallic PEDOT:PSS Electrode for All-Plastic Solar Cells 2023 In: Molecules. - : MDPI. - 1431-5157 .- 1420-3049. ; 28:6 Journal article (peer-reviewed)abstract Plastic electrodes are desirable for the rapid development of flexible organic electronics. In this article, a plastic electrode has been prepared by employing traditional conducting polymer poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) and plastic substrate polyethersulfone (PES). The completed electrode (Denote as HC-PEDOT:PSS) treated by 80% concentrated sulfuric acid (H2SO4) possesses a high electrical conductivity of over 2673 S/cm and a high transmittance of over 90% at 550 nm. The high conductivity is attributed to the regular arrangement of PEDOT molecules, which has been proved by the X-ray diffraction characterization. Temperature-dependent conductivity measurement reveals that the HC-PEDOT:PSS possesses both semiconducting and metallic properties. The binding force and effects between the PEDOT and PEI are investigated in detail. All plastic solar cells with a classical device structure of PES/HC-PEDOT:PSS/PEI/P3HT:ICBA/EG-PEDOT:PSS show a PCE of 4.05%. The ITO-free device with a structure of Glass/HC-PEDOT:PSS/Al4083/PM6:Y6/PDINO/Ag delivers an open-circuit voltage (V-OC) of 0.81 V, short-circuit current (J(SC) ) of 23.5 mA/cm(2), fill factor (FF) of 0.67 and a moderate power conversion efficiency (PCE) of 12.8%. The above results demonstrate the HC-PEDOT:PSS electrode is a promising candidate for all-plastic solar cells and ITO-free organic solar cells.
11.	Shi, Xiaobo, et al. (author) Optical Energy Losses in Organic-Inorganic Hybrid Perovskite Light-Emitting Diodes 2018 In: Advanced Optical Materials. - : John Wiley & Sons. - 2162-7568 .- 2195-1071. ; 6:17 Journal article (peer-reviewed)abstract Light-emitting diodes (LEDs) based on organic-inorganic hybrid perovskites, in particular, 3D and quasi-2D ones, are in the fast development and their external quantum efficiencies (EQEs) have exceeded 10%, making them competitive candidates toward large-area and low-cost light-emitting applications allowing printing techniques. Similar to other LED categories, light out-coupling efficiency is an important parameter determining the EQE of perovskite LEDs (PeLEDs), which, however, is scarcely studied, limiting further efficiency improvement and understanding of PeLEDs. In this work, for the first time, optical energy losses in PeLEDs are investigated through systematic optical simulations, which reveal that the 3D and quasi-2D PeLEDs can achieve theoretically maximum EQEs of approximate to 25% and approximate to 20%, respectively, in spite of their high refractive indices. These results are consistent with the reported experimental data. This work presents primary understanding of the optical energy losses in PeLEDs and will spur new developments in the aspects of device engineering and light extraction techniques to boost the EQEs of PeLEDs.
12.	Zhou, Ke, et al. (author) Molecular and Energetic Order Dominate the Photocurrent Generation Process in Organic Solar Cells with Small Energetic Offsets 2020 In: ACS Energy Letters. - : AMER CHEMICAL SOC. - 2380-8195. ; 5:2, s. 589-596 Journal article (peer-reviewed)abstract Minimizing the energetic offset between the donor (D) and acceptor (A) in organic solar cells (OSCs) is pivotal for reducing the charge-transfer (CT) loss and improving the open-circuit voltage (V-oc). This nevertheless leads to a topic of debate regarding the driving force for the charge separation in OSCs with small energetic offsets. The molecular packing geometries in the active layer determine the energetic levels and trap density, but their relationship with the driving force is seldom considered. Limited by the complicated demixing morphology and inaccurate measurements of energy levels in the prototypical bulk-heterojunction (BHJ) devices, we thereby demonstrate a concise and robust planar-heterojunction model of PM7/N2200 to investigate the origin of driving force for charge generation. It is surprising to note that the device with smaller energy offset shows higher efficiency. Further analysis reveals that a bilayer device with short-range packing PM7 exhibits smaller energetic offsets along with fewer morphological defects and traps compared to its long-range packing counterparts. This molecular packing characteristic diminishes the energetic disorder at the D/A interfaces and inhibits the trap-assisted charge recombination, contributing to the increased short-circuit current (J(SC)) and V-OC. Our results suggest that the energetic offset actually has limited influence on charge separation, while the synergetic control of molecular and energetic order is vital to the photocurrent generation and energy loss reduction in OSCs.
13.	Chen, Haoran, et al. (author) Decoupling engineering of formamidinium-cesium perovskites for efficient photovoltaics 2022 In: National Science Review. - : Oxford University Press. - 2095-5138 .- 2053-714X. ; 9:10 Journal article (peer-reviewed)abstract Sequential Cs incorporation strategy is developed to decouple crystallization of FACs perovskite with reduced electron-phonon coupling, resulting in highly stable FACs tri-iodide perovskite photovoltaics with record efficiency. Although pure formamidinium iodide perovskite (FAPbI(3)) possesses an optimal gap for photovoltaics, their poor phase stability limits the long-term operational stability of the devices. A promising approach to enhance their phase stability is to incorporate cesium into FAPbI(3). However, state-of-the-art formamidinium-cesium (FA-Cs) iodide perovskites demonstrate much worse efficiency compared with FAPbI(3), limited by the different crystallization dynamics of formamidinium and cesium, which result in poor composition homogeneity and high trap densities. We develop a novel strategy of crystallization decoupling processes of formamidinium and cesium via a sequential cesium incorporation approach. As such, we obtain highly reproducible, highly efficient and stable solar cells based on FA(1)(-)(x)Cs(x)PbI(3) (x = 0.05-0.16) films with uniform composition distribution in the nanoscale and low defect densities. We also revealed a new stabilization mechanism for Cs doping to stabilize FAPbI(3), i.e. the incorporation of Cs into FAPbI(3) significantly reduces the electron-phonon coupling strength to suppress ionic migration, thereby improving the stability of FA-Cs-based devices.
14.	Hao, Wende, et al. (author) Vitronectin : a promising breast cancer serum biomarker for early diagnosis of breast cancer in patients 2016 In: Tumor Biology. - : Springer. - 1010-4283 .- 1423-0380. ; 37:7, s. 8909-8916 Journal article (peer-reviewed)abstract Breast cancer is the most common cancer in women worldwide, identification of new biomarkers for early diagnosis and detection will improve the clinical outcome of breast cancer patients. In the present study, we determined serum levels of vitronectin (VN) in 93 breast cancer patients, 30 benign breast lesions, 9 precancerous lesions, and 30 healthy individuals by enzyme-linked immunosorbent assays. Serum VN level was significantly higher in patients with stage 0-I primary breast cancer than in healthy individuals, patients with benign breast lesion or precancerous lesions, as well as those with breast cancer of higher stages. Serum VN level was significantly and negatively correlated with tumor size, lymph node status, and clinical stage (p < 0.05 in all cases). In addition, VN displayed higher area under curve (AUC) value (0.73, 95 % confidence interval (CI) [0.62-0.84]) than carcinoembryonic antigen (CEA) (0.64, 95 % CI [0.52-0.77]) and cancer antigen 15-3 (CA 15-3) (0.69, 95 % CI [0.58-0.81]) when used to distinguish stage 0-I cancer and normal control. Importantly, the combined use of three biomarkers yielded an improvement in receiver operating characteristic curve with an AUC of 0.83, 95 % CI [0.74-0.92]. Taken together, our current study showed for the first time that serum VN is a promising biomarker for early diagnosis of breast cancer when combined with CEA and CA15-3.
15.	He, Chengliang, et al. (author) Near infrared electron acceptors with a photoresponse beyond 1000 nm for highly efficient organic solar cells 2020 In: Journal of Materials Chemistry A. - : ROYAL SOC CHEMISTRY. - 2050-7488 .- 2050-7496. ; 8:35, s. 18154-18161 Journal article (peer-reviewed)abstract Developing near infrared (NIR) organic semiconductors is indispensable for promoting the performance of organic solar cells (OSCs), but addressing the trade-off between voltage and current density thus achieving high efficiency with low energy loss is still an urgent challenge. Herein, NIR acceptors (H1, H2 and H3) with a photoresponse beyond 1000 nm were developed by conjugating dithienopyrrolobenzothiadiazole to 2-(5,6-difluoro-3-oxo-2,3-dihydro-1H-inden-1-ylidene)malononitrileviavaried alkyl thiophene bridges. It was found that the linear outward chains in thiophene bridges could mitigate both the conformation disorder of H3 and the electronic disorder of the PBDB-T:H3 blends, which could help to form a favorable blend morphology, facilitating highly efficient photoelectric conversion in the resultant OSCs. As a result, devices based on PBDB-T:H3 achieve a high efficiency of 13.75% with a low energy loss of 0.55 eV, which is one of the highest efficiencies and the lowest energy loss among OSCs with an optoelectronic response near 1000 nm. This work provides a new design strategy towards NIR acceptors for efficient OSCs and future exploration of functional optoelectronics.
16.	Hultmark, Sandra, 1994, et al. (author) Suppressing Co-Crystallization of Halogenated Non-Fullerene Acceptors for Thermally Stable Ternary Solar Cells 2020 In: Advanced Functional Materials. - : Wiley. - 1616-3028 .- 1616-301X. ; 30:48 Journal article (peer-reviewed)abstract While photovoltaic blends based on non-fullerene acceptors are touted for their thermal stability, this type of acceptor tends to crystallize, which can result in a gradual decrease in photovoltaic performance and affects the reproducibility of the devices. Two halogenated indacenodithienothiophene-based acceptors that readily co-crystallize upon mixing are studied, which indicates that the use of an acceptor mixture alone does not guarantee the formation of a disordered mixture. The addition of the donor polymer to the acceptor mixture readily suppresses the crystallization, which results in a fine-grained ternary blend with nanometer-sized domains that do not coarsen due to a high Tg ≈ 200 °C. As a result, annealing at temperatures of up to 170 °C does not markedly affect the photovoltaic performance of ternary devices, in contrast to binary devices that suffer from acceptor crystallization in the active layer. The results indicate that the ternary approach enables the use of high-temperature processing protocols, which are needed for upscaling and high-throughput fabrication of organic solar cells. Further, ternary devices display a stable photovoltaic performance at 130 °C for at least 205 h, which indicates that the use of acceptor mixtures allows to fabricate devices with excellent thermal stability.
17.	Jin, Yingzhi, et al. (author) Limitations and Perspectives on Triplet-Material-Based Organic Photovoltaic Devices 2019 In: Advanced Materials. - : WILEY-V C H VERLAG GMBH. - 0935-9648 .- 1521-4095. ; 31:22 Journal article (peer-reviewed)abstract Organic photovoltaic cells (OPVs) have attracted broad attention and become a very energetic field after the emergence of nonfullerene acceptors. Long-lifetime triplet excitons are expected to be good candidates for efficiently harvesting a photocurrent. Parallel with the development of OPVs based on singlet materials (S-OPVs), the potential of triplet materials as photoactive layers has been explored. However, so far, OPVs employing triplet materials in a bulk heterojunction have not exhibited better performance than S-OPVs. Here, the recent progress of representative OPVs based on triplet materials (T-OPVs) is briefly summarized. Based on that, the performance limitations of T-OPVs are analyzed. The shortage of desired triplet materials with favorable optoelectronic properties for OPVs, the tradeoff between long lifetime and high binding energy of triplet excitons, as well as the low charge mobility in most triplet materials are crucial issues restraining the efficiencies of T-OPVs. To overcome these limitations, first, novel materials with desired optoelectronic properties are urgently demanded; second, systematic investigation on the contribution and dynamics of triplet excitons in T-OPVs is necessary; third, close multidisciplinary collaboration is required, as proved by the development of S-OPVs.
18.	Jin, Yingzhi, et al. (author) Solution-processed solar-charging power units made of organic photovoltaic modules and asymmetric super-capacitors 2021 In: Applied Physics Letters. - : AMER INST PHYSICS. - 0003-6951 .- 1077-3118. ; 118:20 Journal article (peer-reviewed)abstract Organic photovoltaics with the properties of flexibility, portability, and printability are ideal candidates for low-power-consumption electronics such as the Internet of Things under indoor light conditions. In this work, an all solution-processed integrated photocapacitor (IPC) consisting of an organic photovoltaic module (OPVM) and an asymmetric super-capacitor (ASC) is demonstrated. The OPVM poly[(2,6-(4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)benzo[1,2-b:4,5-b ]dithiophene)-co-(1,3-di(5-thiophene-2-yl)-5,7-bis(2-ethylhexyl)benzo[1, 2-c:4,5-c ]dithiophene-4,8-dione)] (PBDB-T) : 3,9-bis(2-methylene-(3-(1,1-dicyanomethylene)-indanone)-5,5,11,11-tetrakis(4-hexylphenyl)-dithieno[2,3-d:2 ,3 d ]-s-indaceno[1,2-b:5,6-b-]-dithiophene (ITIC) with poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) as the top electrode delivers a high power conversion efficiency of 6.7% with a voltage of 4.3 V (1 Sun). The ASC based on PEDOT:PSS and Ti3C2Tx electrodes shows a wide operation window of 1.5 V in the aqueous electrolyte with a high energy density of 28.7 mu W h cm(-2). Consequently, the IPC achieves a high output voltage of 3 V and outstanding overall efficiency of 6.0% (45 000 lx), which shows excellent stability as the solar-charging power unit under room light (500 lx). Synergizing energy harvest and storage in a solution-processed robust, lightweight, low-cost organic IPC enables this solar-charging power unit wide potential applications in low-power-consumption portable electronics.
19.	Kapilashrami, Mukes, et al. (author) Probing the Optical Property and Electronic Structure of TiO2 Nanomaterials for Renewable Energy Applications 2014 In: Chemical Reviews. - : American Chemical Society (ACS). - 0009-2665 .- 1520-6890. ; 114:19, s. 9662-9707 Research review (peer-reviewed)
20.	Li, Jiayu, et al. (author) Electron-Hole Symmetry Breaking in Charge Transport in Nitrogen-Doped Graphene 2017 In: ACS Nano. - : American Chemical Society (ACS). - 1936-0851 .- 1936-086X. ; 11:5, s. 4641-4650 Journal article (peer-reviewed)abstract Graphitic nitrogen-doped graphene is an excellent platform to study scattering processes of massless Dirac Fermions by charged impurities, in which high mobility can be preserved due to the absence of lattice defects through direct substitution of carbon atoms in the graphene lattice by nitrogen atoms. In this work, we report on electrical and magnetotransport measurements of high-quality graphitic nitrogen-doped graphene. We show that the substitutional nitrogen dopants in graphene introduce atomically sharp scatters for electrons but long-range Coulomb scatters for holes and, thus, graphitic nitrogen-doped graphene exhibits clear electron-hole asymmetry in transport properties. Dominant scattering processes of charge carriers in graphitic nitrogen-doped graphene are analyzed. It is shown that the electron-hole asymmetry originates from a distinct difference in intervalley scattering of electrons and holes. We have also carried out the magnetotransport measurements of graphitic nitrogen-doped graphene at different temperatures and the temperature dependences of intervalley scattering, intravalley scattering, and phase coherent scattering rates are extracted and discussed. Our results provide an evidence for the electron-hole asymmetry in the intervalley scattering induced by substitutional nitrogen dopants in graphene and shine a light on versatile and potential applications of graphitic nitrogen-doped graphene in electronic and valleytronic devices.
21.	Liu, Yanfeng, et al. (author) In Situ Optical Studies on Morphology Formation in Organic Photovoltaic Blends 2021 In: Small Methods. - : John Wiley & Sons. - 2366-9608. ; 5:10, s. 1-12 Journal article (peer-reviewed)abstract The efficiency of bulk heterojunction (BHJ) based organic solar cells is highly dependent on the morphology of the blend film, which is a result of a fine interplay between donor, acceptor, and solvent during the film drying. In this work, a versatile set-up of in situ spectroscopies is used to follow the morphology evolution during blade coating of three iconic BHJ systems, including polymer:fullerene, polymer:nonfullerene small molecule, and polymer:polymer. the drying and photoluminescence quenching dynamics are systematically study during the film formation of both pristine and BHJ films, which indicate that the component with higher molecular weight dominates the blend film formation and the final morphology. Furthermore, Time-resolved photoluminescence, which is employed for the first time as an in situ method for such drying studies, allows to quantitatively determine the extent of dynamic and static quenching, as well as the relative change of quantum yield during film formation. This work contributes to a fundamental understanding of microstructure formation during the processing of different blend films. The presented setup is considered to be an important tool for the future development of blend inks for solution-cast organic or hybrid electronics.
22.	Liu, Yanfeng, 1992- (author) Studying Morphology Formation and Charge Separation in Organic Solar Cells 2021 Doctoral thesis (other academic/artistic)abstract We are currently living in the era of automation and artificial intelligence, which requires more energy than ever before. Meanwhile, the reduction of carbon footprint is needed for keeping the environment sustainable. Exploring green energy is crucial. Solar power is one of the green energy sources. The apparatus that converts solar energy to electricity is a solar cell. Organic solar cells (OSCs), employing organic materials absorbing solar radiation and converting to electricity have got extensive attention in the last decades due to their unique advantages like lightweight, semi-transparency, and potential industrialization. In most cases, an OSC composes of two different organic semiconductors as electron donor and acceptor to form a photoactive layer with a bulk heterojunction (BHJ) structure, and sandwiched between the electron and hole transport layers and then two electrodes. The morphology of the BHJ plays a crucial role in the device's performance, and it is a result of a complicated interplay between donor, acceptor, and solvent during the film drying from a solution. Thus, in-situ monitoring the film drying during solvent evaporation could deepen understanding of the mechanism of the morphology formation. A versatile multiple spectroscopic setup is assembled for this purpose, which can record laser scattering, steady-state photoluminescence (PL), time-resolved photoluminescence (TRPL), and white-light absorption during film formation. By comparing the drying dynamics of three different blend systems with their corresponding pristine films, we find that the blend film formation and its final morphology are more dominated by the component with a higher molecular weight. Different PL and TRPL quenching profiles between fullerene- and non-fullerene-based systems provide hints about different donor-acceptor interactions. Moreover, with the help of TRPL, the relative change of quantum yield during film formation can be calculated. Besides, this setup is also proved suitable for studying mechanisms behind device optimization processes, like the usage of solvent additives. One of the unique features of OSCs based on non-fullerene acceptors is the highly efficient hole transfer from the acceptor to the donor, sometimes even under zero or negative energetic offsets. However, in these cases the mechanism of hole transfer has not been fully understood. By studying hole transfer at the donor:acceptor interface in different material systems and device configurations, we highlight the role of electric field on the charge separation of OSCs when energetic offsets are not enough. To achieve better device performance, engineering the photoelectric properties of interfacial layers is equally essential. A good interfacial layer can facilitate carrier extraction and reduce carrier recombination. We demonstrate that adding MXenes into the PEDOT:PSS can increase the conductivity of this composite hole transport layer, without sacrificing its optical transparency and work function.
23.	Wang, Nana, et al. (author) Perovskite light-emitting diodes based on solution-processed self-organized multiple quantum wells 2016 In: Nature Photonics. - : NATURE PUBLISHING GROUP. - 1749-4885 .- 1749-4893. ; 10:11, s. 699- Journal article (peer-reviewed)abstract Organometal halide perovskites can be processed from solutions at low temperatures to form crystalline direct-bandgap semiconductors with promising optoelectronic properties(1-5). However, the efficiency of their electroluminescence is limited by non-radiative recombination, which is associated with defects and leakage current due to incomplete surface coverage(6-9). Here we demonstrate a solution-processed perovskite light-emitting diode (LED) based on self-organized multiple quantum wells (MQWs) with excellent film morphologies. The MQW-based LED exhibits a very high external quantum efficiency of up to 11.7%, good stability and exceptional highpower performance with an energy conversion efficiency of 5.5% at a current density of 100 mA cm(-2). This outstanding performance arises because the lower bandgap regions that generate electroluminescence are effectively confined by perovskite MQWs with higher energy gaps, resulting in very efficient radiative decay. Surprisingly, there is no evidence that the large interfacial areas between different bandgap regions cause luminescence quenching.
24.	Yao, Nannan, 1992-, et al. (author) Solution-Processed Highly Efficient Semitransparent Organic Solar Cells with Low Donor Contents 2021 In: ACS Applied Energy Materials. - : American Chemical Society. - 2574-0962. ; 4:12, s. 14335-14341 Journal article (peer-reviewed)abstract Semitransparent organic solar cells (ST-OSCs) are promising candidates for applications in building-integrated photovoltaics (BIPV) as windows and facades. The challenge to achieve highly efficient ST-OSCs is the trade-off between power conversion efficiency (PCE) and average visible transmittance (AVT). Herein, solution-processed ST-OSCs are demonstrated on the basis a polymer donor, PM6, and a small molecule acceptor, Y6; lowering the visible-absorbing PM6 contents in blends could increase AVT and maintain PCE. Additionally, conductive polymer PEDOT:PSS is used as the top electrode due to its high transparency, good conductivity, and solution processability. Efficient ST-OSCs with 20 wt % PM6 achieve high PCE of 7.46% and AVT of 36.4%. The light utilization efficiency (LUE) of 2.72% is among the best reported values for solution-processed ST-OSCs. This work provides a straightforward approach for solution-processed ST-OSCs by combining a low fraction of visible-wavelength-selective polymer donors with near-infrared nonfullerene acceptors to achieve high PCE and AVT simultaneously.
25.	Yuan, Zhongcheng, et al. (author) Unveiling the synergistic effect of precursor stoichiometry and interfacial reactions for perovskite light-emitting diodes 2019 In: Nature Communications. - : NATURE PUBLISHING GROUP. - 2041-1723. ; 10 Journal article (peer-reviewed)abstract Metal halide perovskites are emerging as promising semiconductors for cost-effective and high-performance light-emitting diodes (LEDs). Previous investigations have focused on the optimisation of the emissive perovskite layer, for example, through quantum confinement to enhance the radiative recombination or through defect passivation to decrease non-radiative recombination. However, an in-depth understanding of how the buried charge transport layers affect the perovskite crystallisation, though of critical importance, is currently missing for perovskite LEDs. Here, we reveal synergistic effect of precursor stoichiometry and interfacial reactions for perovskite LEDs, and establish useful guidelines for rational device optimization. We reveal that efficient deprotonation of the undesirable organic cations by a metal oxide interlayer with a high isoelectric point is critical to promote the transition of intermediate phases to highly emissive perovskite films. Combining our findings with effective defect passivation of the active layer, we achieve high-efficiency perovskite LEDs with a maximum external quantum efficiency of 19.6%.
26.	Zhang, Liangdong, et al. (author) Bright Free Exciton Electroluminescence from Mn-Doped Two-Dimensional Layered Perovskites 2019 In: The Journal of Physical Chemistry Letters. - : AMER CHEMICAL SOC. - 1948-7185. ; 10:11, s. 3171-3175 Journal article (peer-reviewed)abstract Two-dimensional (2D) perovskites incorporating hydrophobic organic spacer cations show improved film stability and morphology compared to their three-dimensional (3D) counterparts. However, 2D perovskites usually exhibit low photoluminescence quantum efficiency (PLQE) owing to strong exciton-phonon interaction at room temperature, which limits their efficiency in light-emitting diodes (LEDs). Here, we demonstrate that the device performance of 2D perovskite LEDs can be significantly enhanced by doping Mn(2+)in (benzimidazolium)(2)PbI4 2D perovskite films to suppress the exciton-phonon interaction. The distorted [PbI6](4-) octahedra by Mn-doping and the rigid benzimidazolium (BIZ) ring without branched chains in the 2D perovskite structure lead to improved crystallinity and rigidity of the perovskites, resulting in suppressed phonon-exciton interaction and enhanced PLQE. On the basis of this strategy, for the first time, we report yellow electroluminescence from free excitons in 2D (n = 1) perovskites with a maximum brightness of 225 cd m(-2) and a peak EQE of 0.045%.
27.	Zhou, Ke, et al. (author) Molecular Orientation of Polymer Acceptor Dominates Open-Circuit Voltage Losses in All-Polymer Solar Cells 2019 In: ACS Energy Letters. - : AMER CHEMICAL SOC. - 2380-8195. ; 4:5, s. 1057-1064 Journal article (peer-reviewed)abstract Low open-circuit voltage (V-oc) induced by energy loss in organic solar cells is considered to be one of the most influencing factors limiting device performance, in which morphology of the active layer plays a crucial role in determining energy loss. By employing a bilayer structure of the P3HT:N2200 all-polymer system, we have identified the isolated impact of a molecular packing structure on device V-oc with analysis of energy loss processes. Thermal annealing and various solvents were used to control molecular orientation in P3HT:N2200 bilayer devices, in which different V-oc spanning from 0.45 to 0.54 V could be obtained. It was found that energy of charge-transfer state (E-ct) differed in these bilayer devices. Besides, increased charge recombination could be observed in bilayer devices when N2200 layers exhibited face-on orientation, which caused an additional energy loss and decreased V-oc. Our results suggest that rational control of polymer molecular orientation is essential to reduce the energy loss and ultimately achieve high V-oc in all-polymer solar cells.
28.	Zou, Wei, et al. (author) Minimising efficiency roll-off in high-brightness perovskite light-emitting diodes 2018 In: Nature Communications. - : NATURE PUBLISHING GROUP. - 2041-1723. ; 9 Journal article (peer-reviewed)abstract Efficiency roll-off is a major issue for most types of light-emitting diodes (LEDs), and its origins remain controversial. Here we present investigations of the efficiency roll-off in perovskite LEDs based on two-dimensional layered perovskites. By simultaneously measuring electroluminescence and photoluminescence on a working device, supported by transient photoluminescence decay measurements, we conclude that the efficiency roll-off in perovskite LEDs is mainly due to luminescence quenching which is likely caused by non-radiative Auger recombination. This detrimental effect can be suppressed by increasing the width of quantum wells, which can be easily realized in the layered perovskites by tuning the ratio of large and small organic cations in the precursor solution. This approach leads to the realization of a perovskite LED with a record external quantum efficiency of 12.7%, and the efficiency remains to be high, at approximately 10%, under a high current density of 500 mA cm(-2).

Skapa referenser, mejla, bekava och länka

Permalink

Träfflista för sökning "WFRF:(Liu Yanfeng) "

Refine your search

Year