| 1. |
|
|
| 2. |
|
|
| 3. |
- Beal, Jacob, et al.
(författare)
-
Robust estimation of bacterial cell count from optical density
- 2020
-
Ingår i: Communications Biology. - : Springer Science and Business Media LLC. - 2399-3642. ; 3:1
-
Tidskriftsartikel (refereegranskat)abstract
- Optical density (OD) is widely used to estimate the density of cells in liquid culture, but cannot be compared between instruments without a standardized calibration protocol and is challenging to relate to actual cell count. We address this with an interlaboratory study comparing three simple, low-cost, and highly accessible OD calibration protocols across 244 laboratories, applied to eight strains of constitutive GFP-expressing E. coli. Based on our results, we recommend calibrating OD to estimated cell count using serial dilution of silica microspheres, which produces highly precise calibration (95.5% of residuals <1.2-fold), is easily assessed for quality control, also assesses instrument effective linear range, and can be combined with fluorescence calibration to obtain units of Molecules of Equivalent Fluorescein (MEFL) per cell, allowing direct comparison and data fusion with flow cytometry measurements: in our study, fluorescence per cell measurements showed only a 1.07-fold mean difference between plate reader and flow cytometry data.
|
|
| 4. |
- Klionsky, Daniel J., et al.
(författare)
-
Guidelines for the use and interpretation of assays for monitoring autophagy
- 2012
-
Ingår i: Autophagy. - : Informa UK Limited. - 1554-8635 .- 1554-8627. ; 8:4, s. 445-544
-
Forskningsöversikt (refereegranskat)abstract
- In 2008 we published the first set of guidelines for standardizing research in autophagy. Since then, research on this topic has continued to accelerate, and many new scientists have entered the field. Our knowledge base and relevant new technologies have also been expanding. Accordingly, it is important to update these guidelines for monitoring autophagy in different organisms. Various reviews have described the range of assays that have been used for this purpose. Nevertheless, there continues to be confusion regarding acceptable methods to measure autophagy, especially in multicellular eukaryotes. A key point that needs to be emphasized is that there is a difference between measurements that monitor the numbers or volume of autophagic elements (e.g., autophagosomes or autolysosomes) at any stage of the autophagic process vs. those that measure flux through the autophagy pathway (i.e., the complete process); thus, a block in macroautophagy that results in autophagosome accumulation needs to be differentiated from stimuli that result in increased autophagic activity, defined as increased autophagy induction coupled with increased delivery to, and degradation within, lysosomes (in most higher eukaryotes and some protists such as Dictyostelium) or the vacuole (in plants and fungi). In other words, it is especially important that investigators new to the field understand that the appearance of more autophagosomes does not necessarily equate with more autophagy. In fact, in many cases, autophagosomes accumulate because of a block in trafficking to lysosomes without a concomitant change in autophagosome biogenesis, whereas an increase in autolysosomes may reflect a reduction in degradative activity. Here, we present a set of guidelines for the selection and interpretation of methods for use by investigators who aim to examine macroautophagy and related processes, as well as for reviewers who need to provide realistic and reasonable critiques of papers that are focused on these processes. These guidelines are not meant to be a formulaic set of rules, because the appropriate assays depend in part on the question being asked and the system being used. In addition, we emphasize that no individual assay is guaranteed to be the most appropriate one in every situation, and we strongly recommend the use of multiple assays to monitor autophagy. In these guidelines, we consider these various methods of assessing autophagy and what information can, or cannot, be obtained from them. Finally, by discussing the merits and limits of particular autophagy assays, we hope to encourage technical innovation in the field.
|
|
| 5. |
- Campbell, PJ, et al.
(författare)
-
Pan-cancer analysis of whole genomes
- 2020
-
Ingår i: Nature. - : Springer Science and Business Media LLC. - 1476-4687 .- 0028-0836. ; 578:7793, s. 82-
-
Tidskriftsartikel (refereegranskat)abstract
- Cancer is driven by genetic change, and the advent of massively parallel sequencing has enabled systematic documentation of this variation at the whole-genome scale1–3. Here we report the integrative analysis of 2,658 whole-cancer genomes and their matching normal tissues across 38 tumour types from the Pan-Cancer Analysis of Whole Genomes (PCAWG) Consortium of the International Cancer Genome Consortium (ICGC) and The Cancer Genome Atlas (TCGA). We describe the generation of the PCAWG resource, facilitated by international data sharing using compute clouds. On average, cancer genomes contained 4–5 driver mutations when combining coding and non-coding genomic elements; however, in around 5% of cases no drivers were identified, suggesting that cancer driver discovery is not yet complete. Chromothripsis, in which many clustered structural variants arise in a single catastrophic event, is frequently an early event in tumour evolution; in acral melanoma, for example, these events precede most somatic point mutations and affect several cancer-associated genes simultaneously. Cancers with abnormal telomere maintenance often originate from tissues with low replicative activity and show several mechanisms of preventing telomere attrition to critical levels. Common and rare germline variants affect patterns of somatic mutation, including point mutations, structural variants and somatic retrotransposition. A collection of papers from the PCAWG Consortium describes non-coding mutations that drive cancer beyond those in the TERT promoter4; identifies new signatures of mutational processes that cause base substitutions, small insertions and deletions and structural variation5,6; analyses timings and patterns of tumour evolution7; describes the diverse transcriptional consequences of somatic mutation on splicing, expression levels, fusion genes and promoter activity8,9; and evaluates a range of more-specialized features of cancer genomes8,10–18.
|
|
| 6. |
- Cao, Ling, et al.
(författare)
-
Vulnerability of blue foods to human-induced environmental change
- 2023
-
Ingår i: Nature Sustainability. - 2398-9629. ; 6, s. 1186-1198
-
Tidskriftsartikel (refereegranskat)abstract
- Global aquatic foods are a key source of nutrition, but how their production is influenced by anthropogenic environmental changes is not well known. The vulnerability of global blue food systems to main environmental stressors and the related spatial impacts across blue food nations are now quantified. Global aquatic or 'blue' foods, essential to over 3.2 billion people, face challenges of maintaining supply in a changing environment while adhering to safety and sustainability standards. Despite the growing concerns over their environmental impacts, limited attention has been paid to how blue food production is influenced by anthropogenic environmental changes. Here we assess the vulnerability of global blue food systems to predominant environmental disturbances and predict the spatial impacts. Over 90% of global blue food production faces substantial risks from environmental change, with the major producers in Asia and the United States facing the greatest threats. Capture fisheries generally demonstrate higher vulnerability than aquaculture in marine environments, while the opposite is true in freshwater environments. While threats to production quantity are widespread across marine and inland systems, food safety risks are concentrated within a few countries. Identifying and supporting mitigation and adaptation measures in response to environmental stressors is particularly important in developing countries in Asia, Latin America and Africa where risks are high and national response capacities are low. These findings lay groundwork for future work to map environmental threats and opportunities, aiding strategic planning and policy development for resilient and sustainable blue food production under changing conditions.
|
|
| 7. |
- Zhang, Lixiu, et al.
(författare)
-
Advances in the Application of Perovskite Materials
- 2023
-
Ingår i: NANO-MICRO LETTERS. - : SHANGHAI JIAO TONG UNIV PRESS. - 2311-6706. ; 15:1
-
Forskningsöversikt (refereegranskat)abstract
- Nowadays, the soar of photovoltaic performance of perovskite solar cells has set off a fever in the study of metal halide perovskite materials. The excellent optoelectronic properties and defect tolerance feature allow metal halide perovskite to be employed in a wide variety of applications. This article provides a holistic review over the current progress and future prospects of metal halide perovskite materials in representative promising applications, including traditional optoelectronic devices (solar cells, light-emitting diodes, photodetectors, lasers), and cutting-edge technologies in terms of neuromorphic devices (artificial synapses and memristors) and pressure-induced emission. This review highlights the fundamentals, the current progress and the remaining challenges for each application, aiming to provide a comprehensive overview of the development status and a navigation of future research for metal halide perovskite materials and devices.
|
|
| 8. |
- Abgrall, N., et al.
(författare)
-
The large enriched germanium experiment for neutrinoless double beta decay (LEGEND)
- 2017
-
Ingår i: AIP Conference Proceedings. - : Author(s). - 1551-7616 .- 0094-243X. ; 1894
-
Konferensbidrag (refereegranskat)abstract
- The observation of neutrinoless double-beta decay (0νββ) would show that lepton number is violated, reveal that neu-trinos are Majorana particles, and provide information on neutrino mass. A discovery-capable experiment covering the inverted ordering region, with effective Majorana neutrino masses of 15 - 50 meV, will require a tonne-scale experiment with excellent energy resolution and extremely low backgrounds, at the level of ∼0.1 count /(FWHM·t·yr) in the region of the signal. The current generation 76Ge experiments GERDA and the Majorana Demonstrator, utilizing high purity Germanium detectors with an intrinsic energy resolution of 0.12%, have achieved the lowest backgrounds by over an order of magnitude in the 0νββ signal region of all 0νββ experiments. Building on this success, the LEGEND collaboration has been formed to pursue a tonne-scale 76Ge experiment. The collaboration aims to develop a phased 0νββ experimental program with discovery potential at a half-life approaching or at 1028 years, using existing resources as appropriate to expedite physics results.
|
|
| 9. |
|
|
| 10. |
- Elsik, Christine G., et al.
(författare)
-
The Genome Sequence of Taurine Cattle : A Window to Ruminant Biology and Evolution
- 2009
-
Ingår i: Science. - : American Association for the Advancement of Science (AAAS). - 0036-8075 .- 1095-9203. ; 324:5926, s. 522-528
-
Tidskriftsartikel (refereegranskat)abstract
- To understand the biology and evolution of ruminants, the cattle genome was sequenced to about sevenfold coverage. The cattle genome contains a minimum of 22,000 genes, with a core set of 14,345 orthologs shared among seven mammalian species of which 1217 are absent or undetected in noneutherian (marsupial or monotreme) genomes. Cattle-specific evolutionary breakpoint regions in chromosomes have a higher density of segmental duplications, enrichment of repetitive elements, and species-specific variations in genes associated with lactation and immune responsiveness. Genes involved in metabolism are generally highly conserved, although five metabolic genes are deleted or extensively diverged from their human orthologs. The cattle genome sequence thus provides a resource for understanding mammalian evolution and accelerating livestock genetic improvement for milk and meat production.
|
|
| 11. |
- Kattge, Jens, et al.
(författare)
-
TRY plant trait database - enhanced coverage and open access
- 2020
-
Ingår i: Global Change Biology. - : Wiley-Blackwell. - 1354-1013 .- 1365-2486. ; 26:1, s. 119-188
-
Tidskriftsartikel (refereegranskat)abstract
- Plant traits-the morphological, anatomical, physiological, biochemical and phenological characteristics of plants-determine how plants respond to environmental factors, affect other trophic levels, and influence ecosystem properties and their benefits and detriments to people. Plant trait data thus represent the basis for a vast area of research spanning from evolutionary biology, community and functional ecology, to biodiversity conservation, ecosystem and landscape management, restoration, biogeography and earth system modelling. Since its foundation in 2007, the TRY database of plant traits has grown continuously. It now provides unprecedented data coverage under an open access data policy and is the main plant trait database used by the research community worldwide. Increasingly, the TRY database also supports new frontiers of trait-based plant research, including the identification of data gaps and the subsequent mobilization or measurement of new data. To support this development, in this article we evaluate the extent of the trait data compiled in TRY and analyse emerging patterns of data coverage and representativeness. Best species coverage is achieved for categorical traits-almost complete coverage for 'plant growth form'. However, most traits relevant for ecology and vegetation modelling are characterized by continuous intraspecific variation and trait-environmental relationships. These traits have to be measured on individual plants in their respective environment. Despite unprecedented data coverage, we observe a humbling lack of completeness and representativeness of these continuous traits in many aspects. We, therefore, conclude that reducing data gaps and biases in the TRY database remains a key challenge and requires a coordinated approach to data mobilization and trait measurements. This can only be achieved in collaboration with other initiatives.
|
|
| 12. |
|
|
| 13. |
- Li, WM, et al.
(författare)
-
Plasma metabolomics and lipidomics signatures of motoric cognitive risk syndrome in community-dwelling older adults
- 2022
-
Ingår i: Frontiers in aging neuroscience. - : Frontiers Media SA. - 1663-4365. ; 14, s. 977191-
-
Tidskriftsartikel (refereegranskat)abstract
- Motoric cognitive risk syndrome (MCR) is characterized by subjective cognitive complaints (SCCs) and slow gait (SG). Metabolomics and lipidomics may potentiate disclosure of the underlying mechanisms of MCR.MethodsThis was a cross-sectional study from the West China Health and Aging Trend cohort study (WCHAT). The operational definition of MCR is the presence of SCCs and SG without dementia or mobility disability. The test and analysis were based on untargeted metabolomics and lipidomics, consensus clustering, lasso regression and 10-fold cross-validation.ResultsThis study enrolled 6,031 individuals for clinical analysis and 577 plasma samples for omics analysis. The overall prevalence of MCR was 9.7%, and the prevalence of MCR-only, assessed cognitive impairment-only (CI-only) and MCR-CI were 7.5, 13.3, and 2.1%, respectively. By consensus clustering analysis, MCR-only was clustered into three metabolic subtypes, MCR-I, MCR-II and MCR-III. Clinically, body fat mass (OR = 0.89, CI = 0.82–0.96) was negatively correlated with MCR-I, and comorbidity (OR = 2.19, CI = 1.10–4.38) was positively correlated with MCR-III. Diabetes mellitus had the highest ORs above 1 in MCR-II and MCR-III (OR = 3.18, CI = 1.02–9.91; OR = 2.83, CI = 1.33–6.04, respectively). The risk metabolites of MCR-III showed relatively high similarity with those of cognitive impairment. Notably, L-proline, L-cystine, ADMA, and N1-acetylspermidine were significantly changed in MCR-only, and PC(40:3), SM(32:1), TG(51:3), eicosanoic acid(20:1), methyl-D-galactoside and TG(50:3) contributed most to the prediction model for MCR-III.InterpretationPre-dementia syndrome of MCR has distinct metabolic subtypes, and SCCs and SG may cause different metabolic changes to develop MCR.
|
|
| 14. |
|
|
| 15. |
- Ma, Tao, et al.
(författare)
-
Genomic insights into salt adaptation in a desert poplar
- 2013
-
Ingår i: Nature Communications. - : Springer Science and Business Media LLC. - 2041-1723. ; 4, s. 2797-
-
Tidskriftsartikel (refereegranskat)abstract
- Despite the high economic and ecological importance of forests, our knowledge of the genomic evolution of trees under salt stress remains very limited. Here we report the genome sequence of the desert poplar, Populus euphratica, which exhibits high tolerance to salt stress. Its genome is very similar and collinear to that of the closely related mesophytic congener, P. trichocarpa. However, we find that several gene families likely to be involved in tolerance to salt stress contain significantly more gene copies within the P. euphratica lineage. Furthermore, genes showing evidence of positive selection are significantly enriched in functional categories related to salt stress. Some of these genes, and others within the same categories, are significantly upregulated under salt stress relative to their expression in another salt-sensitive poplar. Our results provide an important background for understanding tree adaptation to salt stress and facilitating the genetic improvement of cultivated poplars for saline soils.
|
|
| 16. |
- Sheng, Renwang, et al.
(författare)
-
Material stiffness in cooperation with macrophage paracrine signals determines the tenogenic differentiation of mesenchymal stem cells
- 2023
-
Ingår i: Advanced Science. - : John Wiley & Sons. - 2198-3844. ; 10:17
-
Tidskriftsartikel (refereegranskat)abstract
- Stiffness is an important physical property of biomaterials that determines stem cell fate. Guiding stem cell differentiation via stiffness modulation has been considered in tissue engineering. However, the mechanism by which material stiffness regulates stem cell differentiation into the tendon lineage remains controversial. Increasing evidence demonstrates that immune cells interact with implanted biomaterials and regulate stem cell behaviors via paracrine signaling; however, the role of this mechanism in tendon differentiation is not clear. In this study, polydimethylsiloxane (PDMS) substrates with different stiffnesses are developed, and the tenogenic differentiation of mesenchymal stem cells (MSCs) exposed to different stiffnesses and macrophage paracrine signals is investigated. The results reveal that lower stiffnesses facilitates tenogenic differentiation of MSCs, while macrophage paracrine signals at these stiffnesses suppress the differentiation. When exposed to these two stimuli, MSCs still exhibit enhanced tendon differentiation, which is further elucidated by global proteomic analysis. Following subcutaneous implantation in rats for 2 weeks, soft biomaterial induces only low inflammation and promotes tendon-like tissue formation. In conclusion, the study demonstrates that soft, rather than stiff, material has a greater potential to guide tenogenic differentiation of stem cells, which provides comprehensive evidence for optimized bioactive scaffold design in tendon tissue engineering.
|
|
| 17. |
|
|
| 18. |
- Chang, Yue, et al.
(författare)
-
Cd-Metallothioneins in Three Additional Tetrahymena Species : Intragenic Repeat Patterns and Induction by Metal Ions
- 2014
-
Ingår i: Journal of Eukaryotic Microbiology. - : Wiley. - 1066-5234 .- 1550-7408. ; 61:4, s. 333-342
-
Tidskriftsartikel (refereegranskat)abstract
- Ciliate metallothioneins (MTs) possess many unique features compared to the "classic" MTs in other organisms, but they have only been studied in a small number of species. In this study, we investigated cDNAs encoding subfamily 7a metallothioneins (CdMTs) in three Tetrahymena species (T. hegewischi, T. malaccensis, and T. mobilis). Four CdMT genes (ThegMT1, ThegMT2, TmalMT1, and TmobMT1) were cloned and characterized. They share high sequence similarity to previously identified subfamily 7a MT members. Tetrahymena CdMTs exhibit a remarkably regular intragenic repeat homology. The CdMT sequences were divided into two main types of modules, which had been previously described, and which we name "A" and "B". ThegMT2 was identified as the first MT isoform solely composed of module "B". A phylogenetic analysis of individual modules of every characterized Tetrahymena CdMT rigorously documents the conclusion that modules are important units of CdMT evolution, which have undergone frequent and rapid gain/loss and shuffling. The transcriptional activity of the four newly identified genes was measured under different heavy metal exposure (Cd, Cu, Zn, Pb) using real-time quantitative PCR. The results showed that these genes were differentially induced after short (1 h) or long (24 h) metal exposure. The evolutionary diversity of Tetrahymena CdMTs is further discussed with regard to their induction by metal ions.
|
|
| 19. |
- Chu, M.S., et al.
(författare)
-
Response of a resistive and rotating tokamak to external magnetic perturbations below the Alfven frequency
- 2011
-
Ingår i: Nuclear Fusion. - 1741-4326 .- 0029-5515. ; 51, s. 073036-
-
Tidskriftsartikel (refereegranskat)abstract
- Motivated by the recent experimental observation that plasma stability can be improved by external magnetic perturbations, the general problem of plasma response to external magnetic perturbations is investigated. Different (vacuum, ideal and resistive) plasma response models are considered and compared. Plasma response, in experiments where stabilization was achieved, is obtained through computation using the MARS-F code, with a plasma model that includes both plasma resistivity and rotation. The resultant magnetic field line stochasticity is much reduced from that obtained formerly using the vacuum plasma model. This reduced stochasticity is more consistent with the favourable experimental observation of enhanced stability. Examples are given for the response of an ITER plasma to perturbations generated by the correction coils; and the response of a plasma to external coils (antenna) up to the Alfvén frequency.
|
|
| 20. |
- Du, Yaoyao, et al.
(författare)
-
Cartilage Oligomeric Matrix Protein Inhibits Vascular Smooth Muscle Calcification by Interacting With Bone Morphogenetic Protein-2.
- 2011
-
Ingår i: Circulation Research. - 1524-4571. ; 108, s. 79-917
-
Tidskriftsartikel (refereegranskat)abstract
- Rationale: Vascular calcification is a significant contributor to cardiovascular morbidity and mortality. We recently reported that cartilage oligomeric matrix protein (COMP) is pivotal for maintaining the homeostasis of vascular smooth muscle cells (VSMCs). Whether COMP affects the process of vascular calcification is unknown. Objective: We aimed to test whether COMP modulates vascular calcification. Methods and Results: VSMC calcification in vitro was induced by calcifying media containing high inorganic phosphate or calcium. In vivo medial vessel calcification was induced in rats by 5/6 nephrectomy with a high-phosphate diet or by periadventitial application of CaCl(2) to the abdominal aorta. COMP protein level was markedly reduced in both calcified VSMCs and arteries. COMP deficiency remarkably exacerbated VSMC calcification, whereas ectopic expression of COMP greatly reduced calcification. Furthermore, COMP knockdown facilitated osteogenic markers expression by VSMCs even in the absence of calcifying media. By contrast, COMP overexpression significantly inhibited high phosphate- or high calcium-induced VSMC osteochondrogenic transition. Induction of osteogenic marker expression by COMP silencing was reversed by a soluble form of bone morphogenetic protein (BMP)-2 receptor IA, which suggests a BMP-2-dependent mechanism. Our data revealed that COMP bound directly to BMP-2 through the C terminus, inhibited BMP-2 receptor binding, and blocked BMP-2 osteogenic signaling, indicating COMP inhibits osteochondrogenic transition of VSMCs at least partially through inhibiting BMP-2. Conclusions: Our data strongly suggest that COMP is a novel inhibitor of vascular calcification. The imbalance between the effects of COMP and BMP-2 may provide new insights into the pathophysiology of vascular calcification.
|
|
| 21. |
- Feng, Hongliang, et al.
(författare)
-
Association between accelerometer-measured amplitude of rest-activity rhythm and future health risk : a prospective cohort study of the UK Biobank
- 2023
-
Ingår i: The Lancet Healthy Longevity. - 2666-7568. ; 4:5, s. e200-e210
-
Tidskriftsartikel (refereegranskat)abstract
- BACKGROUND: The health effects of rest-activity rhythm are of major interest to public health, but its associations with health outcomes remain elusive. We aimed to examine the associations between accelerometer-measured rest-activity rhythm amplitude and health risks among the general UK population.METHODS: We did a prospective cohort analysis of UK Biobank participants aged 43-79 years with valid wrist-worn accelerometer data. Low rest-activity rhythm amplitude was defined as the first quintile of relative amplitude; all other quintiles were classified as high rest-activity rhythm amplitude. Outcomes of interest were defined using International Classification of Diseases 10th Revision codes and consisted of incident cancer and cardiovascular, infectious, respiratory, and digestive diseases, and all-cause and disease-specific (cardiovascular, cancer, and respiratory) mortality. Participants with a current diagnosis of any outcome of interest were excluded. We assessed the associations between decreased rest-activity rhythm amplitude and outcomes using Cox proportional hazards models.FINDINGS: Between June 1, 2013, and Dec 23, 2015, 103 682 participants with available raw accelerometer data were enrolled. 92 614 participants (52 219 [56·4%] women and 40 395 [42·6%] men) with a median age of 64 years (IQR 56-69) were recruited. Median follow-up was 6·4 years (IQR 5·8-6·9). Decreased rest-activity rhythm amplitude was significantly associated with increased incidence of cardiovascular diseases (adjusted hazard ratio 1·11 [95% CI 1·05-1·16]), cancer (1·08 [1·01-1·16]), infectious diseases (1·31 [1·22-1·41]), respiratory diseases (1·26 [1·19-1·34]), and digestive diseases (1·08 [1·03-1·14]), as well as all-cause mortality (1·54 [1·40-1·70]) and disease-specific mortality (1·73 [1·34-2·22] for cardiovascular diseases, 1·32 [1·13-1·55] for cancer, and 1·62 [1·25-2·09] for respiratory diseases). Most of these associations were not modified by age older than 65 years or sex. Among 16 accelerometer-measured rest-activity parameters, low rest-activity rhythm amplitude had the strongest or second- strongest associations with nine health outcomes.INTERPRETATION: Our results suggest that low rest-activity rhythm amplitude might contribute to major health outcomes and provide further evidence to promote risk-modifying strategies associated with rest-activity rhythm to improve health and longevity.
|
|
| 22. |
- Feng, Hongliang, et al.
(författare)
-
Associations of timing of physical activity with all-cause and cause-specific mortality in a prospective cohort study
- 2023
-
Ingår i: Nature Communications. - : Springer Nature. - 2041-1723. ; 14:1
-
Tidskriftsartikel (refereegranskat)abstract
- There is a growing interest in the role of timing of daily behaviors in improving health. However, little is known about the optimal timing of physical activity to maximize health benefits. We perform a cohort study of 92,139 UK Biobank participants with valid accelerometer data and all-cause and cause-specific mortality outcomes, comprising over 7 years of median follow-up (638,825 person-years). Moderate-to-vigorous intensity physical activity (MVPA) at any time of day is associated with lower risks for all-cause, cardiovascular disease, and cancer mortality. In addition, compared with morning group (>50% of daily MVPA during 05:00-11:00), midday-afternoon (11:00-17:00) and mixed MVPA timing groups, but not evening group (17:00-24:00), have lower risks of all-cause and cardiovascular disease mortality. These protective associations are more pronounced among the elderly, males, less physically active participants, or those with preexisting cardiovascular diseases. Here, we show that MVPA timing may have the potential to improve public health.
|
|
| 23. |
|
|
| 24. |
|
|
| 25. |
|
|
| 26. |
- Jin, Ying-Hui, et al.
(författare)
-
Chemoprophylaxis, diagnosis, treatments, and discharge management of COVID-19 : An evidence-based clinical practice guideline (updated version)
- 2020
-
Ingår i: Military Medical Research. - : Springer Science and Business Media LLC. - 2054-9369. ; 7:1
-
Tidskriftsartikel (refereegranskat)abstract
- The novel severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is the cause of a rapidly spreading illness, coronavirus disease 2019 (COVID-19), affecting more than seventeen million people around the world. Diagnosis and treatment guidelines for clinicians caring for patients are needed. In the early stage, we have issued "A rapid advice guideline for the diagnosis and treatment of 2019 novel coronavirus (2019-nCoV) infected pneumonia (standard version)"; now there are many direct evidences emerged and may change some of previous recommendations and it is ripe for develop an evidence-based guideline. We formed a working group of clinical experts and methodologists. The steering group members proposed 29 questions that are relevant to the management of COVID-19 covering the following areas: chemoprophylaxis, diagnosis, treatments, and discharge management. We searched the literature for direct evidence on the management of COVID-19, and assessed its certainty generated recommendations using the Grading of Recommendations, Assessment, Development and Evaluation (GRADE) approach. Recommendations were either strong or weak, or in the form of ungraded consensus-based statement. Finally, we issued 34 statements. Among them, 6 were strong recommendations for, 14 were weak recommendations for, 3 were weak recommendations against and 11 were ungraded consensus-based statement. They covered topics of chemoprophylaxis (including agents and Traditional Chinese Medicine (TCM) agents), diagnosis (including clinical manifestations, reverse transcription-polymerase chain reaction (RT-PCR), respiratory tract specimens, IgM and IgG antibody tests, chest computed tomography, chest x-ray, and CT features of asymptomatic infections), treatments (including lopinavir-ritonavir, umifenovir, favipiravir, interferon, remdesivir, combination of antiviral drugs, hydroxychloroquine/chloroquine, interleukin-6 inhibitors, interleukin-1 inhibitors, glucocorticoid, qingfei paidu decoction, lianhua qingwen granules/capsules, convalescent plasma, lung transplantation, invasive or noninvasive ventilation, and extracorporeal membrane oxygenation (ECMO)), and discharge management (including discharge criteria and management plan in patients whose RT-PCR retesting shows SARS-CoV-2 positive after discharge). We also created two figures of these recommendations for the implementation purpose. We hope these recommendations can help support healthcare workers caring for COVID-19 patients.
|
|
| 27. |
- Kristan, Matej, et al.
(författare)
-
The first visual object tracking segmentation VOTS2023 challenge results
- 2023
-
Ingår i: 2023 IEEE/CVF International conference on computer vision workshops (ICCVW). - : Institute of Electrical and Electronics Engineers Inc.. - 9798350307443 - 9798350307450 ; , s. 1788-1810
-
Konferensbidrag (refereegranskat)abstract
- The Visual Object Tracking Segmentation VOTS2023 challenge is the eleventh annual tracker benchmarking activity of the VOT initiative. This challenge is the first to merge short-term and long-term as well as single-target and multiple-target tracking with segmentation masks as the only target location specification. A new dataset was created; the ground truth has been withheld to prevent overfitting. New performance measures and evaluation protocols have been created along with a new toolkit and an evaluation server. Results of the presented 47 trackers indicate that modern tracking frameworks are well-suited to deal with convergence of short-term and long-term tracking and that multiple and single target tracking can be considered a single problem. A leaderboard, with participating trackers details, the source code, the datasets, and the evaluation kit are publicly available at the challenge website1
|
|
| 28. |
- Li, Xuebing, et al.
(författare)
-
A data-driven approach for tool wear recognition and quantitative prediction based on radar map feature fusion
- 2021
-
Ingår i: Measurement. - : Elsevier BV. - 0263-2241 .- 1873-412X. ; 185
-
Tidskriftsartikel (refereegranskat)abstract
- Tool wear monitoring during the cutting process is crucial for ensuring part quality and productivity. A datadriven monitoring approach based on radar map feature fusion is proposed for tool wear recognition and quantitative prediction, aiming at tracking the evolution of tool wear comprehensively. Specifically, the sensitive features from multi-source signals are fused by a radar map, and health indicators capable of characterizing the tool wear evolution are obtained. For the recognition of tool wear state and the quantitative prediction of tool wear values, the Adaboost Decision Tree (Adaboost-DT) ensemble learning model and stacked bi-directional long short-term memory (SBiLSTM) deep learning network are established, respectively. Experimental results demonstrated that the proposed approach could recognize the current wear state quickly and accurately whilst predicting wear values based on limited historical data available. Combining tool wear recognition and prediction results contributes to making a more flexible tool replacement decision in intelligent manufacturing processes.
|
|
| 29. |
- Li, Xing-Yu, et al.
(författare)
-
Comparative Study of Dayside Pulsating Auroras Induced by Ultralow-Frequency Waves
- 2023
-
Ingår i: Universe. - : MDPI AG. - 2218-1997. ; 9:6
-
Tidskriftsartikel (refereegranskat)abstract
- Pulsating auroras are usually observed with ultralow-frequency (ULF) waves in the Pc 3-5 band (period 10-600 s). These auroras are thought to result from interactions between energetic electrons and chorus waves, but their relationship with ULF waves remains an open question. In this study, we investigated this question by conducting a comparative study on two ULF wave events with pulsating auroras observed near the magnetic footprints. Conjugate observations from the Magnetospheric Multiscale mission and the Chinese Yellow River Station were used. In both events, lower-band chorus waves were observed, which were suggested to be connected with the auroral pulsations by wavelet analysis. The intensity of these waves oscillates at the period of the ULF waves, but the physics laid behind them differs by events. During the event of 22 January 2019, compressional ULF waves changed the threshold for the whistler anisotropy instability periodically, affecting the emission of chorus waves. In the event on 10 January 2016, poloidal ULF waves modulated the chorus wave generation by regulating electron temperature anisotropy through drift resonance. ULF waves in these events may originate from perturbations in the solar wind. We highlight the role of ULF waves in the solar wind-magnetosphere-ionosphere coupling, which requires further study.
|
|
| 30. |
|
|
| 31. |
- Liu, Hong, et al.
(författare)
-
Variant selection of primary–secondary extension twin pairs in magnesium : An analytical calculation study
- 2021
-
Ingår i: Acta Materialia. - : Elsevier BV. - 1359-6454 .- 1873-2453. ; 219, s. 1-19
-
Tidskriftsartikel (refereegranskat)abstract
- Twining is an important deformation mode in magnesium. In a deformed magnesium sample, an extension twin crystal, i.e., {101¯2} twin, can form inside a {101¯2} primary twin, which is named {101¯2}–{101¯2} secondary twin. These secondary twins often appear at the intersection of two primary twins, and form primary–secondary twin pairs. Experimental observations show that the most frequently observed primary–secondary twin pairs have a unique misorientation, i.e., twin variant selection exists. Such variant selection of the primary–secondary twin pairs is studied in this work. The crystallographic analysis reveals that the twin planes of the primary and secondary twins that form a twin pair have coincident intersection lines with the boundary where the twin pair adjoins. An analytical calculation method based on Eshelby's inclusion theory is developed, and the calculation results show that only for this unique misorientation, the stress fields concentrated at the rims of the primary and the secondary twins are mutually favoured. The analysis is further extended to the incoming–outgoing twin pairs across ordinary grain boundaries, and compared with the commonly used geometrical compatibility factor m′. It is found that m′ only gives good prediction for twin transmission when the shear stress component on the twin plane along the twin shear direction of the incoming twin is the major contributor to the resolved shear stress of the outgoing twin. When other stress components play a dominant role, m′ becomes ineffective in prediction, which is the case for the primary–secondary twin pairs.
|
|
| 32. |
|
|
| 33. |
|
|
| 34. |
- Liu, Jian-li, et al.
(författare)
-
China's most typical nonferrous organic-metal facilities own specific microbial communities
- 2018
-
Ingår i: Scientific Reports. - : Nature Publishing Group. - 2045-2322. ; 8:1
-
Tidskriftsartikel (refereegranskat)abstract
- The diversity and function of microorganisms have yet to be explored at non-ferrous metal mining facilities (NMMFs), which are the world's largest and potentially most toxic sources of co-existing metal(loid)s and flotation reagents (FRs). The diversity and inferred functions of different bacterial communities inhabiting two types of sites (active and abandoned) in Guangxi province (China) were investigated for the first time. Here we show that the structure and diversity of bacteria correlated with the types of mine sites, metal(loid)s, and FRs concentrations; and best correlated with the combination of pH, Cu, Pb, and Mn. Combined microbial coenobium may play a pivotal role in NMMFs microbial life. Arenimonas, specific in active mine sites and an acidophilic bacterium, carries functions able to cope with the extreme conditions, whereas Latescibacteria specific in abandoned sites can degrade organics. Such a bacterial consortium provides new insights to develop cost-effective remediation strategies of co-contaminated sites that currently remain intractable for bioremediation.
|
|
| 35. |
|
|
| 36. |
- Liu, X., et al.
(författare)
-
Intelligent Machining Technology in Cutting Process
- 2018
-
Ingår i: Jixie Gongcheng Xuebao/Journal of Mechanical Engineering. - : Editorial Office of Chinese Journal of Mechanical Engineering. - 0577-6686. ; 54:16, s. 45-61
-
Tidskriftsartikel (refereegranskat)abstract
- Metal cutting is a very complex process. In the cutting process, the related knowledge and theories of physics, chemistry, mechanics, materials science, vibration, tribology, heat transfer and other fields are involved. The cutting process control has been the focus of the cutting research. With the development of machining technology and the coming of the Industry 4. 0, researchers are getting more concerned with the intelligent machining technology. It is an inevitable trend to apply the intelligent machining technology in the cutting process. The connotation and the application process of intelligent machining technology is expounded to investigate the critical technology in intelligent manufacturing. The research results in the simulation and optimization, cutting process condition monitoring, and optimization control are reviewed. Through analyzing the application prospect and problems of intelligent machining technology, the main scientific problems and key technologies to be solved are proposed. Intelligent machining is the development direction of processing technology. The application of intelligent machining technology in the cutting process will bring another technological revolution in the manufacturing industry.
|
|
| 37. |
- Liu, Zhibo, et al.
(författare)
-
Research on Tool Wear Based on 3D FEM Simulation for Milling Process
- 2020
-
Ingår i: JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING. - : MDPI AG. - 2504-4494. ; 4:4
-
Tidskriftsartikel (refereegranskat)abstract
- In the process of metal cutting, the anti-wear performance of the tool determines the life of the tool and affects the surface quality of the workpiece. The finite element simulation method can directly show the tool wear state and morphology, but due to the limitations of the simulation time and complex boundary conditions, it has not been commonly used in tool life prediction. Based on this, a tool wear model was established on the platform of a finite element simulation software for the cutting process of titanium alloy TC4 by end milling. The key technique is to embed different types of tool wear models into the finite element model in combination with the consequent development technology. The effectiveness of the tool wear model was validated by comparing the experimental results with the simulation results. At the same time, in order to quickly predict the tool life, an empirical prediction formula of tool wear was established, and the change course of tool wear under time change was obtained.
|
|
| 38. |
- Liu, Zhixi, et al.
(författare)
-
The burden of hand, foot, and mouth disease among children under different vaccination scenarios in China: a dynamic modelling study
- 2021
-
Ingår i: BMC Infectious Diseases. - : Springer Science and Business Media LLC. - 1471-2334. ; 21:1
-
Tidskriftsartikel (refereegranskat)abstract
- BACKGROUND: Hand, foot, and mouth disease (HFMD) is a common illness in young children. A monovalent vaccine has been developed in China protecting against enterovirus-71, bivalent vaccines preventing HFMD caused by two viruses are under development.OBJECTIVE: To predict and compare the incidence of HFMD under different vaccination scenarios in China.METHODS: We developed a compartmental model to capture enterovirus transmission and the natural history of HFMD in children aged 0-5, and calibrated to reported cases in the same age-group from 2015 to 2018. We compared the following vaccination scenarios: different combinations of monovalent and bivalent vaccine; a program of constant vaccination to that of pulse vaccination prior to seasonal outbreaks.RESULTS: We estimate 1,982,819, 2,258,846, 1,948,522 and 2,398,566 cases from 2015 to 2018. Increased coverage of monovalent vaccine from 0 to 80% is predicted to decrease the cases by 797,262 (49.1%). Use of bivalent vaccine at an 80% coverage level would decrease the cases by 828,560. Use of a 2.0× pulse vaccination for the bivalent vaccine in addition to 80% coverage would reduce cases by over one million. The estimated R0 for HFMD in 2015-2018 was 1.08, 1.10, 1.35 and 1.17.CONCLUSIONS: Our results point to the benefit of bivalent vaccine and using a pulse vaccination in specific months over routine vaccination. Other ways to control HFMD include isolation of patients in the early stage of dissemination, more frequent hand-washing and ventilation, and better treatment options for patients.
|
|
| 39. |
- Ma, Wei-Juan, et al.
(författare)
-
Proteomic changes in articular cartilage of human endemic osteoarthritis in China.
- 2011
-
Ingår i: Proteomics. - : Wiley-VCH Verlagsgesellschaft. - 1615-9853 .- 1615-9861. ; 11:14, s. 2881-90
-
Tidskriftsartikel (refereegranskat)abstract
- Kashin-Beck disease (KBD) is a chronic endemic osteochondropathy with unclear pathogenesis. It is a degenerative disease similar to osteoarthritis, but with different manifestations of cartilage damage. The aim of this investigation was to show the protein changes in KBD cartilage and to identify the candidate proteins in order to understand the pathogenesis of the disease. Proteins were extracted from the media of primary cell cultures of KBD and normal chondrocytes, and separated by two-dimensional fluorescence difference gel electrophoresis (2-D DIGE). MALDI-TOF/TOF analysis revealed statistically significant differences in 27 proteins from KBD chondrocyte cultures, which consisted of 17 up-regulated and ten down-regulated proteins. The results were further validated by Western blot analysis. The proteins identified are mainly involved in cellular redox homeostasis and stress response (MnSOD, Hsp27, Peroxiredoxin-1, and Cofilin-1), glycolysis (PGK-1, PGM-1, α-enolase), and cell motility and cytoskeletal organization (Actin, Calponin-2, and Keratin). These KBD-associated proteins indicate that cytoskeletal remodeling, glycometabolism, and oxidative stress are abnormal in KBD articular cartilage.
|
|
| 40. |
- Richards, Stephen, et al.
(författare)
-
The genome of the model beetle and pest Tribolium castaneum.
- 2008
-
Ingår i: Nature. - 1476-4687. ; 452:7190, s. 949-55
-
Tidskriftsartikel (refereegranskat)abstract
- Tribolium castaneum is a representative of earth’s most numerous eukaryotic order, a powerful model organism for the study of generalized insect development, and also an important pest of stored agricultural products. We describe its genome sequence here. This omnivorous beetle has evolved an ability to interact with a diverse chemical environment as evidenced by large expansions in odorant and gustatory receptors, as well as p450 and other detoxification enzymes. Developmental patterns in Tribolium are more representative of other arthropods than those found in Drosophila, a fact represented in gene content and function. For one, Tribolium has retained more ancestral genes involved in cell-cell communication than Drosophila, and some are expressed in the growth zone crucial for axial elongation in short germ development. Systemic RNAi in T. castaneum appears to use mechanisms distinct from those found in C. elegans, but nevertheless offers similar power for the elucidation of gene function and identification of targets for selective insect control.
|
|
| 41. |
|
|
| 42. |
- Wang, Heyong, et al.
(författare)
-
Dynamic Redistribution of Mobile Ions in Perovskite Light-Emitting Diodes
- 2021
-
Ingår i: Advanced Functional Materials. - : WILEY-V C H VERLAG GMBH. - 1616-301X .- 1616-3028. ; 31:8
-
Tidskriftsartikel (refereegranskat)abstract
- Despite quick development of perovskite light-emitting diodes (PeLEDs) during the past few years, the fundamental mechanisms on how ion migration affects device efficiency and stability remain unclear. Here, it is demonstrated that the dynamic redistribution of mobile ions in the emissive layer plays a key role in the performance of PeLEDs and can explain a range of abnormal behaviours commonly observed during the device measurement. The dynamic redistribution of mobile ions changes charge-carrier injection and leads to increased recombination current; at the same time, the ion redistribution also changes charge transport and results in decreased shunt resistance current. As a result, the PeLEDs show hysteresis in external quantum efficiencies (EQEs) and radiance, that is, higher EQEs and radiance during the reverse voltage scan than during the forward scan. In addition, the changes on charge injection and transport induced by the ion redistribution also well explain the rise of the EQE/radiance values under constant driving voltages. The argument is further rationalized by adding extra formamidinium iodide (FAI) into optimized PeLEDs based on FAPbI(3), resulting in more significant hysteresis and shorter operational stability of the PeLEDs.
|
|
| 43. |
- Yang, Xu, et al.
(författare)
-
Modelling of plasma response to 3D external magnetic field perturbations in EAST
- 2016
-
Ingår i: Plasma Physics and Controlled Fusion. - : IOP Publishing. - 1361-6587 .- 0741-3335. ; 58:11, s. 114006-
-
Tidskriftsartikel (refereegranskat)abstract
- Sustained mitigation and/or suppression of type-I edge localized modes (ELMs) has been achieved in EAST high-confinement plasmas, utilizing the resonant magnetic perturbation (RMP) fields produced by two rows of magnetic coils located just inside the vacuum vessel. Systematic toroidal modelling of the plasma response to these RMP fields with various coil configurations (with dominant toroidal mode number n = 1, 2, 3, 4) in EAST is, for the first time, carried out by using the MARS-F code (Liu et al 2000 Phys. Plasmas 7 3681), with results reported here. In particular, the plasma response is computed with varying coil phasing (the toroidal phase difference of the coil currents) between the upper and lower rows of coils, from 0 to 360°. Four figures of merit, constructed based on the MARS-F computations, are used to determine the optimal coil phasing. The modelled results, taking into account the plasma response, agree well with the experimental observations in terms of the coil phasing for both the mitigated and the suppressed ELM cases in EAST experiments. This study provides a crucial confirmation of the role of the plasma edge peeling response in ELM control, complementing similar studies carried out for other tokamak devices.
|
|
| 44. |
- Yin, Xiu, et al.
(författare)
-
Doping of charge-transfer molecules in cocrystals for the design of materials with novel piezo-activated luminescence
- 2023
-
Ingår i: Chemical Science. - : Royal Society of Chemistry. - 2041-6520 .- 2041-6539. ; 14:6, s. 1479-1484
-
Tidskriftsartikel (refereegranskat)abstract
- A novel piezo-activated luminescent material with wide range modulation of the luminescence wavelength and a giant intensity enhancement upon compression was prepared using a strategy of molecular doping. The doping of THT molecules into TCNB-perylene cocrystals results in the formation of a weak but pressure-enhanced emission center in the material at ambient pressure. Upon compression, the emissive band from the undoped component TCNB-perylene undergoes a normal red shift and emission quenching, while the weak emission center shows an anomalous blue shift from 615 nm to 574 nm and a giant luminescence enhancement up to 16 GPa. Further theoretical calculations show that doping by THT could modify intermolecular interactions, promote molecular deformation, and importantly, inject electrons into the host TCNB-perylene upon compression, which contributes to the novel piezochromic luminescence behavior. Based on this finding, we further propose a universal approach to design and regulate the piezo-activated luminescence of materials by using other similar dopants.
|
|
| 45. |
- Yin, Xu-Fei, et al.
(författare)
-
Solving independent set problems with photonic quantum circuits
- 2023
-
Ingår i: Proceedings of the National Academy of Sciences of the United States of America. - 0027-8424 .- 1091-6490. ; 120:22
-
Tidskriftsartikel (refereegranskat)abstract
- An independent set (IS) is a set of vertices in a graph such that no edge connects any two vertices. In adiabatic quantum computation [E. Farhi, et al., Science 292, 472–475 (2001); A. Das, B. K. Chakrabarti, Rev. Mod. Phys. 80, 1061–1081 (2008)], a given graph G(V, E) can be naturally mapped onto a many-body Hamiltonian , with edges ? being the two-body interactions between adjacent vertices ?. Thus, solving the IS problem is equivalent to finding all the computational basis ground states of . Very recently, non-Abelian adiabatic mixing (NAAM) has been proposed to address this task, exploiting an emergent non-Abelian gauge symmetry of [B. Wu, H. Yu, F. Wilczek, Phys. Rev. A 101, 012318 (2020)]. Here, we solve a representative IS problem ?(8,7) by simulating the NAAM digitally using a linear optical quantum network, consisting of three C-Phase gates, four deterministic two-qubit gate arrays (DGA), and ten single rotation gates. The maximum IS has been successfully identified with sufficient Trotterization steps and a carefully chosen evolution path. Remarkably, we find IS with a total probability of 0.875(16), among which the nontrivial ones have a considerable weight of about 31.4%. Our experiment demonstrates the potential advantage of NAAM for solving IS-equivalent problems.
|
|
| 46. |
- You, Q. L., et al.
(författare)
-
Recent frontiers of climate changes in East Asia at global warming of 1.5 degrees C and 2 degrees C
- 2022
-
Ingår i: npj Climate and Atmospheric Science. - : Springer Science and Business Media LLC. - 2397-3722. ; 5:1
-
Tidskriftsartikel (refereegranskat)abstract
- East Asia is undergoing significant climate changes and these changes are likely to grow in the future. It is urgent to characterize both the mechanisms controlling climate and the response of the East Asian climate system at global warming of 1.5 and 2 degrees C above pre-industrial levels (GW1.5 and GW2 hereafter). This study reviews recent studies on East Asian climate change at GW1.5 and GW2. The intensity and variability of the East Asian summer monsoon are expected to increase modestly, accompanied by an enhancement of water vapor transport. Other expected changes include the intensification of the Western Pacific Subtropical High and an intensified and southward shift of the East Asian jet, while the intensity of the East Asian winter monsoon is projected to reduce with high uncertainty. Meanwhile, the frequency of ENSO may increase in a warming world with great uncertainty. Significant warming and wetting occur in East Asia, with more pronounced intensity, frequency, and duration of climate extremes at GW2 than that at GW1.5. The fine structure of regional climate changes and the presence and location of various warming hotspots, however, show substantial divergence among different model simulations. Furthermore, the Asian climate responses can differ substantially between the transient and stabilized GW1.5 and GW2, which has important implications for emission policies. Thus, to better plan effective mitigation and adaptation activities, further research including an in-depth exploration of the divergent responses in transient versus stabilized scenarios, the quantification of future projection uncertainties, and improvements of the methods to reduce model uncertainties are required.
|
|
| 47. |
- Zhang, Bowen, et al.
(författare)
-
An imbalanced data learning approach for tool wear monitoring based on data augmentation
- 2023
-
Ingår i: Journal of Intelligent Manufacturing. - : Springer Nature. - 0956-5515 .- 1572-8145.
-
Tidskriftsartikel (refereegranskat)abstract
- During cutting operations, tool condition monitoring (TCM) is essential for maintaining safety and cost optimization, especially in the accelerated tool wear phase. Due to the safety constraints of the actual production environment and the tool's properties, the data for each wear stage is usually unbalanced, and these unbalances lead to difficulties in failure monitoring. To this end, a novel TCM method based on data augmentation is proposed, which uses generative adversarial networks (GANs) to generate valuable artificial samples for a few classes to balance the data distribution. Unlike the traditional GANs, the proposed Conditional Wasserstein GAN-Gradient Penalty (CWGAN-GP) avoids pattern collapse and training instability and simultaneously generates more realistic data and signal samples with labels for different wear states. To evaluate the quality of the generated data, an evaluation index is proposed to evaluate the generated data while further screening the samples to achieve effective oversampling. Finally, the continuous wavelet transform (CWT) is combined with the convolutional neural network (CNN) architecture of Inception-ResNet-v2 for TCM, and it is demonstrated that data augmentation can effectively improve the performance of training classification models for unbalanced data by comparing three classification methods with two data augmentation experiments, and the proposed method has a better monitoring performance.
|
|
| 48. |
- Zhang, Qian, et al.
(författare)
-
A quantitative assessment of the distribution and extent of urban clusters in China
- 2012
-
Ingår i: Journal of Geographical Sciences. - : Springer Science and Business Media LLC. - 1009-637X .- 1861-9568. ; 22:1, s. 137-151
-
Tidskriftsartikel (refereegranskat)abstract
- Urban clusters are the expected products of high levels of industry and urbanization in a country, as well as being the basic units of participation in global competition. With respect to China, urban clusters are regarded as the dominant formation for boosting the Chinese urbanization process. However, to date, there is no coincident, efficient, and credible methodological system and set of techniques to identify Chinese urban clusters. This research investigates the potential of a computerized identification method supported by geographic information techniques to provide a better understanding of the distribution of Chinese urban clusters. The identification method is executed based on a geographic information database, a digital elevation model, and socio-economic data with the aid of ArcInfo Macro Language programming. In the method, preliminary boundaries are identified according to transportation accessibility, and final identifications are achieved from limiting city numbers, population, and GDP in a region with the aid of the rasterized socio-economic dataset. The results show that the method identifies nine Chinese urban clusters, i.e., Pearl River Delta, Lower Yangtze River Valley, Beijing-Tianjin-Hebei Region, Northeast China Plain, Middle Yangtze River Valley, Central China Plains, Western Taiwan Strait, Guanzhong and Chengdu-Chongqing urban clusters. This research represents the first study involving the computerized identification of Chinese urban clusters. Moreover, compared to other related studies, the study's approach, which combines transportation accessibility and socio-economic characteristics, is shown to be a distinct, effective and reliable way of identifying urban clusters.
|
|
| 49. |
- Zhou, Lina, et al.
(författare)
-
Plasma response based RMP coil geometry optimization for an ITER plasma
- 2016
-
Ingår i: Plasma Physics and Controlled Fusion. - : IOP Publishing. - 1361-6587 .- 0741-3335. ; 58:11, s. 115003-
-
Tidskriftsartikel (refereegranskat)abstract
- Based on an ITER 15MA Q = 10 inductive scenario, a systematic numerical investigation is carried out in order to understand the effect of varying the geometry of the magnetic coils, used for controlling the edge localized modes in tokamaks, on the plasma response to the resonant magnetic perturbation (RMP) fields produced by these coils. Toroidal computations show that both of the plasma response based figures of merit - one is the pitch resonant radial field component near the plasma edge and the other is the plasma displacement near the X-point of the separatrix - consistently yield the same prediction for the optimal coil geometry. With a couple of exceptions, the presently designed poloidal location of the ITER upper and lower rows of RMP coils is close to the optimum, according to the plasma response based criteria. This holds for different coil current configurations with n = 2, 3, 4, as well as different coil phasing between the upper and lower rows. The coils poloidal width from the present design, on the other hand, is sub-optimal for the upper and lower rows. Modelling also finds that the plasma response amplitude sharply decreases by moving the middle row RMP coils of ITER from the designed radial location (just inside the inner vacuum vessel) outwards (outside the outer vacuum vessel). The decay rate is sensitively affected by the middle row coils' poloidal coverage for low-n (n = 1, 2) RMP fields, but not for high-n (n = 4) fields.
|
|
| 50. |
- Anchordoqui, Luis A., et al.
(författare)
-
The Forward Physics Facility : Sites, experiments, and physics potential
- 2022
-
Ingår i: Physics reports. - : Elsevier. - 0370-1573 .- 1873-6270. ; 968, s. 1-50
-
Tidskriftsartikel (refereegranskat)abstract
- The Forward Physics Facility (FPF) is a proposal to create a cavern with the space and infrastructure to support a suite of far-forward experiments at the Large Hadron Collider during the High Luminosity era. Located along the beam collision axis and shielded from the interaction point by at least 100 m of concrete and rock, the FPF will house experiments that will detect particles outside the acceptance of the existing large LHC experiments and will observe rare and exotic processes in an extremely low-background environment. In this work, we summarize the current status of plans for the FPF, including recent progress in civil engineering in identifying promising sites for the FPF and the experiments currently envisioned to realize the FPF's physics potential. We then review the many Standard Model and new physics topics that will be advanced by the FPF, including searches for long-lived particles, probes of dark matter and dark sectors, high-statistics studies of TeV neutrinos of all three flavors, aspects of perturbative and non-perturbative QCD, and high-energy astroparticle physics.
|
|
