| 1. |
- Abelev, Betty, et al.
(författare)
-
Long-range angular correlations on the near and away side in p-Pb collisions at root S-NN=5.02 TeV
- 2013
-
Ingår i: Physics Letters. Section B: Nuclear, Elementary Particle and High-Energy Physics. - : Elsevier BV. - 0370-2693. ; 719:1-3, s. 29-41
-
Tidskriftsartikel (refereegranskat)abstract
- Angular correlations between charged trigger and associated particles are measured by the ALICE detector in p-Pb collisions at a nucleon-nucleon centre-of-mass energy of 5.02 TeV for transverse momentum ranges within 0.5 < P-T,P-assoc < P-T,P-trig < 4 GeV/c. The correlations are measured over two units of pseudorapidity and full azimuthal angle in different intervals of event multiplicity, and expressed as associated yield per trigger particle. Two long-range ridge-like structures, one on the near side and one on the away side, are observed when the per-trigger yield obtained in low-multiplicity events is subtracted from the one in high-multiplicity events. The excess on the near-side is qualitatively similar to that recently reported by the CMS Collaboration, while the excess on the away-side is reported for the first time. The two-ridge structure projected onto azimuthal angle is quantified with the second and third Fourier coefficients as well as by near-side and away-side yields and widths. The yields on the near side and on the away side are equal within the uncertainties for all studied event multiplicity and p(T) bins, and the widths show no significant evolution with event multiplicity or p(T). These findings suggest that the near-side ridge is accompanied by an essentially identical away-side ridge. (c) 2013 CERN. Published by Elsevier B.V. All rights reserved.
|
|
| 2. |
- Abelev, Betty, et al.
(författare)
-
Measurement of prompt J/psi and beauty hadron production cross sections at mid-rapidity in pp collisions at root s=7 TeV
- 2012
-
Ingår i: Journal of High Energy Physics. - 1029-8479. ; :11
-
Tidskriftsartikel (refereegranskat)abstract
- The ALICE experiment at the LHC has studied J/psi production at mid-rapidity in pp collisions at root s = 7 TeV through its electron pair decay on a data sample corresponding to an integrated luminosity L-int = 5.6 nb(-1). The fraction of J/psi from the decay of long-lived beauty hadrons was determined for J/psi candidates with transverse momentum p(t) > 1,3 GeV/c and rapidity vertical bar y vertical bar < 0.9. The cross section for prompt J/psi mesons, i.e. directly produced J/psi and prompt decays of heavier charmonium states such as the psi(2S) and chi(c) resonances, is sigma(prompt J/psi) (p(t) > 1.3 GeV/c, vertical bar y vertical bar < 0.9) = 8.3 +/- 0.8(stat.) +/- 1.1 (syst.)(-1.4)(+1.5) (syst. pol.) mu b. The cross section for the production of b-hadrons decaying to J/psi with p(t) > 1.3 GeV/c and vertical bar y vertical bar < 0.9 is a sigma(J/psi <- hB) (p(t) > 1.3 GeV/c, vertical bar y vertical bar < 0.9) = 1.46 +/- 0.38 (stat.)(-0.32)(+0.26) (syst.) mu b. The results are compared to QCD model predictions. The shape of the p(t) and y distributions of b-quarks predicted by perturbative QCD model calculations are used to extrapolate the measured cross section to derive the b (b) over bar pair total cross section and d sigma/dy at mid-rapidity.
|
|
| 3. |
- Abelev, Betty, et al.
(författare)
-
Underlying Event measurements in pp collisions at root s=0.9 and 7 TeV with the ALICE experiment at the LHC
- 2012
-
Ingår i: Journal of High Energy Physics. - 1029-8479. ; :7
-
Tidskriftsartikel (refereegranskat)abstract
- We present measurements of Underlying Event observables in pp collisions at root s = 0 : 9 and 7 TeV. The analysis is performed as a function of the highest charged-particle transverse momentum p(T),L-T in the event. Different regions are defined with respect to the azimuthal direction of the leading (highest transverse momentum) track: Toward, Transverse and Away. The Toward and Away regions collect the fragmentation products of the hardest partonic interaction. The Transverse region is expected to be most sensitive to the Underlying Event activity. The study is performed with charged particles above three different p(T) thresholds: 0.15, 0.5 and 1.0 GeV/c. In the Transverse region we observe an increase in the multiplicity of a factor 2-3 between the lower and higher collision energies, depending on the track p(T) threshold considered. Data are compared to PYTHIA 6.4, PYTHIA 8.1 and PHOJET. On average, all models considered underestimate the multiplicity and summed p(T) in the Transverse region by about 10-30%.
|
|
| 4. |
- Barrat, Jean-Louis, et al.
(författare)
-
Soft matter roadmap
- 2024
-
Ingår i: Journal of Physics. - : Institute of Physics Publishing (IOPP). - 2515-7639. ; 7:1
-
Forskningsöversikt (refereegranskat)abstract
- Soft materials are usually defined as materials made of mesoscopic entities, often self-organised, sensitive to thermal fluctuations and to weak perturbations. Archetypal examples are colloids, polymers, amphiphiles, liquid crystals, foams. The importance of soft materials in everyday commodity products, as well as in technological applications, is enormous, and controlling or improving their properties is the focus of many efforts. From a fundamental perspective, the possibility of manipulating soft material properties, by tuning interactions between constituents and by applying external perturbations, gives rise to an almost unlimited variety in physical properties. Together with the relative ease to observe and characterise them, this renders soft matter systems powerful model systems to investigate statistical physics phenomena, many of them relevant as well to hard condensed matter systems. Understanding the emerging properties from mesoscale constituents still poses enormous challenges, which have stimulated a wealth of new experimental approaches, including the synthesis of new systems with, e.g. tailored self-assembling properties, or novel experimental techniques in imaging, scattering or rheology. Theoretical and numerical methods, and coarse-grained models, have become central to predict physical properties of soft materials, while computational approaches that also use machine learning tools are playing a progressively major role in many investigations. This Roadmap intends to give a broad overview of recent and possible future activities in the field of soft materials, with experts covering various developments and challenges in material synthesis and characterisation, instrumental, simulation and theoretical methods as well as general concepts.
|
|
| 5. |
- Lu, Junjing, et al.
(författare)
-
An improved sectional model to simulate multi-component aerosol dynamics in a containment of pressurized water reactor
- 2021
-
Ingår i: Journal of Aerosol Science. - : Elsevier BV. - 0021-8502 .- 1879-1964. ; 157
-
Tidskriftsartikel (refereegranskat)abstract
- Simulating an evolving aerosol population in a reactor containment is essential for estimating the radioactivity that is possible to leak to the environment. In this study, a sectional model is developed to simulate multi-component aerosol dynamics in the containment during severe ac-cidents of a pressurized water reactor by improving the widely used MAEROS (Multicomponent AEROSol) model. An important advantage of the improved model is its simplified calculation method by introducing a series of correction factors to the equation coefficients when the thermal boundary conditions and the aerosol particle density in the containment change continuously. In addition, the restriction of the maximum section number in the MAEROS model is removed. The reliability of the model is validated against four analytical solutions and three sets of test data. Moreover, the improvements in the model are also proven to be necessary to effectively capture the influences of thermal boundary conditions and aerosol particle density on aerosol dynamics.
|
|
| 6. |
- Ye, Lian, et al.
(författare)
-
Feasibility analysis of plastic and biomass hydrochar for blast furnace injection
- 2023
-
Ingår i: Energy. - : Elsevier BV. - 0360-5442 .- 1873-6785. ; 263
-
Tidskriftsartikel (refereegranskat)abstract
- Hydrothermal carbonization (HTC) technology upgrades combustible waste (CW) to high-quality fuel known as hydrochar. However, there is a research gap regarding the application limit of hydrochar instead of fossil fuels in blast furnaces. In this study, the physical, chemical, and metallurgical properties of hydrochar were thoroughly analyzed. The results showed that gross calorific value, grindability, ignition temperature, explosivity, combustion and gasification all improved by HTC process compared with the waste feedstocks. Moreover, the HTC process can effectively remove harmful elements (K, Na, Cl, and S) from feedstocks into liquid and gas phase without adding other reagents, reducing harmful effects in the blast furnace. Removal rates by HTC were >80% for alkali metals and >73.9% for Cl (reaching 98.18% for polyvinyl chloride hydrochar). The environmental benefit calculation shows that the CO2 emission reduction of replacing bituminous coal with 40% HTC-treated maize straw can reach 94.7 kg/tHM. The annual CO2 reduction can reach 1.7 x 107 kg and the annual coal reduction is 1.5 x 107 kg of a blast furnace. The results showed that hydrochar is a clean energy source compared with fossil fuel alternatives and meets the blast furnace injection requirements.
|
|
