| 1. |
|
|
| 2. |
|
|
| 3. |
- Maurya, O., et al.
(författare)
-
Emergence of Ni-Based Chalcogenides (S and Se) for Clean Energy Conversion and Storage
- 2021
-
Ingår i: Small. - : John Wiley and Sons Inc. - 1613-6810 .- 1613-6829. ; 17:33
-
Tidskriftsartikel (refereegranskat)abstract
- Nickel chalcogenide (S and Se) based nanostructures intrigued scientists for some time as materials for energy conversion and storage systems. Interest in these materials is due to their good electrochemical stability, eco-friendly nature, and low cost. The present review compiles recent progress in the area of nickel-(S and Se)-based materials by providing a comprehensive summary of their structural and chemical features and performance. Improving properties of the materials, such as electrical conductivity and surface characteristics (surface area and morphology), through strategies like nano-structuring and hybridization, are systematically discussed. The interaction of the materials with electrolytes, other electro-active materials, and inactive components are analyzed to understand their effects on the performance of energy conversion and storage devices. Finally, outstanding challenges and possible solutions are briefly presented with some perspectives toward the future development of these materials for energy-oriented devices with high performance. © 2021 Wiley-VCH GmbH
|
|
| 4. |
|
|
| 5. |
- Umrao, S., et al.
(författare)
-
Anticarcinogenic activity of blue fluorescent hexagonal boron nitride quantum dots : as an effective enhancer for DNA cleavage activity of anticancer drug doxorubicin
- 2019
-
Ingår i: MATERIALS TODAY BIO. - : ELSEVIER. - 2590-0064. ; 1
-
Tidskriftsartikel (refereegranskat)abstract
- Blue fluorescent hexagonal boron nitride quantum dots (h-BNQDs) of similar to 10 nm size as an effective enhancer for DNA cleavage activity of anticancer drug doxorubicin (DOX) were synthesized using simple one-step hydrothermal disintegration of exfoliated hexagonal boron nitride at very low temperature similar to 120 degrees C. Boron nitride quantum dots ( BNQDs) at a concentration of 25 mu g/ml enhanced DNA cleavage activity of DOX up to 70% as checked by converting supercoiled fragment into nicked circular PBR322 DNA. The interaction of BNQDs with DOX is proportional to the concentration of BNQDs, with binding constant K-b similar to 0.07338 mu g/ml. In addition, ab initio theoretical results indicate that DOX is absorbed on BNQDs at the N-terminated edge with binding energy -1.075 eV and prevented the normal replication mechanisms in DNA. BNQDs have been shown to kill the breast cancer cell MCF-7 extensively as compared with the normal human keratinocyte cell HaCaT. The cytotoxicity of BNQDs may be correlated with reduced reactive oxygen species level and increased apoptosis in MCF-7 cells, which may be liable to enhance the anticancerous activity of DOX. The results provide a base to develop BNQD-DOX as a more effective anticancer drug.
|
|
| 6. |
- Agostinelli, Emilio, et al.
(författare)
-
A Role for STOML3 in Olfactory Sensory Transduction
- 2021
-
Ingår i: eNeuro. - : Society for Neuroscience. - 2373-2822. ; 8:2
-
Tidskriftsartikel (refereegranskat)abstract
- Stomatin-like protein-3 (STOML3) is an integral membrane protein expressed in the cilia of olfactory sensory neurons (OSNs), but its functional role in this cell type has never been addressed. STOML3 is also expressed in dorsal root ganglia neurons, where it has been shown to be required for normal touch sensation. Here, we extended previous results indicating that STOML3 is mainly expressed in the knob and proximal cilia of OSNs. We additionally showed that mice lacking STOML3 have a morphologically normal olfactory epithelium. Because of its presence in the cilia, together with known olfactory transduction components, we hypothesized that STOML3 could be involved in modulating odorant responses in OSNs. To investigate the functional role of STOML3, we performed loose patch recordings from wild-type (WT) and Stoml3 knock-out (KO) OSNs. We found that spontaneous mean firing activity was lower with additional shift in interspike intervals (ISIs) distributions in Stoml3 KOs compared with WT neurons. Moreover, the firing activity in response to stimuli was reduced both in spike number and duration in neurons lacking STOML3 compared with WT neurons. Control experiments suggested that the primary deficit in neurons lacking STOML3 was at the level of transduction and not at the level of action potential generation. We conclude that STOML3 has a physiological role in olfaction, being required for normal sensory encoding by OSNs.
|
|
| 7. |
- Henriques, Tiago, et al.
(författare)
-
TMEM16A calcium-activated chloride currents in supporting cells of the mouse olfactory epithelium
- 2019
-
Ingår i: The Journal of General Physiology. - : Rockefeller University Press. - 0022-1295 .- 1540-7748. ; 151:7, s. 954-966
-
Tidskriftsartikel (refereegranskat)abstract
- Glial-like supporting (or sustentacular) cells are important constituents of the olfactory epithelium that are involved in several physiological processes such as production of endocannabinoids, insulin, and ATP and regulation of the ionic composition of the mucus layer that covers the apical surface of the olfactory epithelium. Supporting cells express metabotropic P2Y purinergic receptors that generate ATP-induced Ca2+ signaling through the activation of a PLC-mediated cascade. Recently, we reported that a subpopulation of supporting cells expresses also the Ca2+-activated Cl− channel TMEM16A. Here, we sought to extend our understanding of a possible physiological role of this channel in the olfactory system by asking whether Ca2+ can activate Cl− currents mediated by TMEM16A. We use whole-cell patch-clamp analysis in slices of the olfactory epithelium to measure dose–response relations in the presence of various intracellular Ca2+ concentrations, ion selectivity, and blockage. We find that knockout of TMEM16A abolishes Ca2+-activated Cl− currents, demonstrating that TMEM16A is essential for these currents in supporting cells. Also, by using extracellular ATP as physiological stimuli, we found that the stimulation of purinergic receptors activates a large TMEM16A-dependent Cl− current, indicating a possible role of TMEM16A in ATP-mediated signaling. Altogether, our results establish that TMEM16A-mediated currents are functional in olfactory supporting cells and provide a foundation for future work investigating the precise physiological role of TMEM16A in the olfactory system.
|
|
| 8. |
- Madsen, L. M., et al.
(författare)
-
Comparison of tTEM-IP and ERT-IP : cases from mine tailing sites in Sweden
- 2023
-
Ingår i: 29th European Meeting of Environmental and Engineering Geophysics, Held at Near Surface Geoscience Conference and Exhibition 2023, NSG 2023. - 9789462824607
-
Konferensbidrag (refereegranskat)abstract
- The induced polarization (IP) effect can be studied using both galvanic and inductive methods. Here we study IP and its manifestation in transient electromagnetic (TEM) data from a tTEM system and in time-domain electric resistivity tomography (ERT) data. Since the two methods are sensitive to two different frequency ranges, a direct IP spectrum comparison is not possible. Instead, we assess the IP resolution and compare both resistivity and chargeability inversion results. We show that tTEM data recorded in highly resistive environments with high IP, suffer from fast-decaying transients and sign-changes, which makes it difficult to resolve the true resistivity and IP model due equivalences. A comparison of the maximum phase shifts from two mine tailing sites shows that the chargeability structures gained from the inversion of tTEM data to some degree follow the structures of the chargeability resolved from the ERT data. However, the magnitudes of the resolved phases are generally below 50 mRad for ERT, but up to 500 mRad for tTEM. This indicates that different polarization mechanisms are dominating within the different frequency ranges of the tTEM and ERT methods.
|
|
| 9. |
- Maurya, Devendra Kumar, et al.
(författare)
-
Development of the olfactory epithelium and nasal glands in TMEM16A-/- and TMEM16A+/+ mice
- 2015
-
Ingår i: PLOS ONE. - : Public Library of Science (PLoS). - 1932-6203. ; 10:6
-
Tidskriftsartikel (refereegranskat)abstract
- TMEM16A/ANO1 is a calcium-activated chloride channel expressed in several types of epithelia and involved in various physiological processes, including proliferation and development. During mouse embryonic development, the expression of TMEM16A in the olfactory epithelium is dynamic. TMEM16A is expressed at the apical surface of the entire olfactory epithelium at embryonic day E12.5 while from E16.5 its expression is restricted to a region near the transition zone with the respiratory epithelium. To investigate whether TMEM16A plays a role in the development of the mouse olfactory epithelium, we obtained the first immunohistochemistry study comparing the morphological properties of the olfactory epithelium and nasal glands in TMEM16A-/- and TMEM16A+/+ littermate mice. A comparison between the expression of the olfactory marker protein and adenylyl cyclase III shows that genetic ablation of TMEM16A did not seem to affect the maturation of olfactory sensory neurons and their ciliary layer. As TMEM16A is expressed at the apical part of supporting cells and in their microvilli, we used ezrin and cytokeratin 8 as markers of microvilli and cell body of supporting cells, respectively, and found that morphology and development of supporting cells were similar in TMEM16A-/- and TMEM16A+/+ littermate mice. The average number of supporting cells, olfactory sensory neurons, horizontal and globose basal cells were not significantly different in the two types of mice. Moreover, we also observed that the morphology of Bowman’s glands, nasal septal glands and lateral nasal glands did not change in the absence of TMEM16A. Our results indicate that the development of mouse olfactory epithelium and nasal glands does not seem to be affected by the genetic ablation of TMEM16A.
|
|
| 10. |
- Maurya, H. S., et al.
(författare)
-
Additive manufacturing of TiC-based cermets : A detailed comparison with spark plasma sintered samples
- 2023
-
Ingår i: Journal of Alloys and Compounds. - 0925-8388 .- 1873-4669. ; 960
-
Tidskriftsartikel (refereegranskat)abstract
- The present work is a comparative study on the TiC-430 L ferritic stainless steel (FSS) cermets manufactured via two powder metallurgical processes, namely, conventional spark plasma sintering (SPS) and metal additive manufacturing (AM) process (laser powder-bed fusion process (LPBF)/selective laser melting (SLM)). The rescanning strategy has been used to preheat and melt the powder bed with different laser parameters during the SLM process to suppress the presence of residual thermal stress leading to the fabrication of cermets without cracks. The as-fabricated SPS samples (95 %) show a relatively lower density than the SLM-built parts (~98 %). A study of their mechanical properties such as hardness, compressive strength, and fracture toughness was conducted and discussed in detail. Further, the corrosion behavior of the fabricated cermets parts was evaluated in 3.5 wt% NaCl. The SLM-prepared specimens reveal finer microstructures and better mechanical properties (compressive strength and fracture toughness) due to the presence of fine microstructure. Furthermore, the corrosion current density of TiC-430 L fss-based cermets fabricated by SLM is approximately 270 times lower than that of cermets parts fabricated by SPS, indicating excellent corrosion resistance. On the other hand, the hardness shows an opposite trend, where the SPS samples show the maximum hardness as compared to the SLM counterparts due to the presence of hard and coarse TiC particles along with some metallic carbides formed during the SPS process. The results reveal that AM processes not only can fabricate cermets with intricate shapes but can also fabricate them with improved mechanical and corrosion properties.
|
|
| 11. |
|
|
| 12. |
- Nylen, S, et al.
(författare)
-
Splenic accumulation of IL-10 mRNA in T cells distinct from CD4+CD25+ (Foxp3) regulatory T cells in human visceral leishmaniasis
- 2007
-
Ingår i: The Journal of experimental medicine. - : Rockefeller University Press. - 0022-1007 .- 1540-9538. ; 204:4, s. 805-817
-
Tidskriftsartikel (refereegranskat)abstract
- Visceral leishmaniasis (VL) is a life-threatening disease characterized by uncontrolled parasitization of the spleen, liver, and bone marrow. Interleukin (IL)-10 has been implicated in the suppression of host immunity in human VL based on the elevated levels of IL-10 observed in plasma and lesional tissue, and its role in preventing clearance of Leishmania donovani in murine models of VL. The aim of this study was to identify the cellular source of IL-10 in human VL and determine if CD4+CD25+ (Foxp3high) regulatory T (T reg) cells are associated with active disease. We analyzed surface marker and gene expression in peripheral blood mononuclear cells and splenic aspirates from Indian VL patients before and 3–4 wk after treatment with Amphotericin B. The results did not point to an important role for natural CD4+CD25+ (Foxp3high) T reg cells in human VL. They did not accumulate in and were not a major source of IL-10 in the spleen, and their removal did not rescue antigen-specific interferon γ responses. In contrast, splenic T cells depleted of CD25+ cells expressed the highest levels of IL-10 mRNA and were the predominant lymphocyte population in the VL spleen. The elevated levels of IL-10 in VL plasma significantly enhanced the growth of L. donovani amastigotes in human macrophages. The data implicate IL-10–producing CD25−Foxp3− T cells in the pathogenesis of human VL.
|
|
| 13. |
- Rahmani, Ramin, et al.
(författare)
-
Structural analysis of selective laser melted copper-tin alloy
- 2024
-
Ingår i: Journal of Alloys and Metallurgical Systems. - : Elsevier B.V.. - 2949-9178. ; 7
-
Tidskriftsartikel (refereegranskat)abstract
- Additively manufactured complex geometries from copper alloys with high thermal and mechanical properties have drawn the attention of researchers. The present contribution explores the additive manufacturing (AM) of copper-based alloys from powder particles intended for heat sink and heat exchange applications. Selective laser melting (SLM) parameters featuring low laser beam power (160 W), moderate scanning speed (320 mm/s), and high energy density (200 J/mm³) were employed to fabricate dense components from CuSn10 particles. The present work deal with structural analysis and precision investigation of microfabrication, particularly in Struts, Tubes, and Fins. Mechanical properties (compression and hardness) for Strut structure, differential pressure evaluations for Tube structure, and analyses of thermal and electrical conductivities for Fin structure were investigated. The results showed an improvement in strength compared to those of pure copper, facilitating ease of AM. The obtained results affirm the feasibility of AM, demonstrating the successful creation of complex and combined solid-porous structures using SLM process from Cu alloys. A comprehensive structural investigation and characterization of the Cu–Sn alloy is presented here, aiming to establish a standardized approach for analysing Cu alloys. The results indicate that small-scaled structures fabricated via CuSn10 alloy exhibits a thermal conductivity of 34.3 W·m⁻¹·K⁻¹, an electrical conductivity of 4.72×10⁶ S/m, a hardness of 119 HV-50, a uniform surface roughness of 6 µm, and can withstand a force loading of 1 kN.
|
|
| 14. |
- Venkateshwarlu, Sarangi, et al.
(författare)
-
Relaxor behavior and electrothermal properties of Sn- And Nb-modified (Ba,Ca)TiO3 Pb-free ferroelectric
- 2020
-
Ingår i: Journal of Materials Research. - : Springer Science and Business Media LLC. - 0884-2914 .- 2044-5326. ; 35:8, s. 1017-1027
-
Forskningsöversikt (refereegranskat)abstract
- Relaxor ferroelectrics have drawn attention for possible applications in solid-state cooling and thermal energy harvesting, owing to their electrothermal energy conversion properties. Here, we have synthesized and characterized the structure-property correlations of a new Sn- and Nb-doped (Ba,Ca)TiO3 relaxor ferroelectric with large pyroelectric and electrocaloric effects over a broad temperature range. We observed two peaks for the temperature-dependent pyroelectric coefficient: (i) -(δP/δT) ∼ 563 μC/(m2 K) at T ∼ 270 K and (ii) -(δP/δT) ∼ 1021 μC/(m2 K) at T ∼ 320 K. In addition, a broad peak for electrocaloric temperature change is observed near 320 K with a relative cooling power of 1/417 J/kg. These properties could be correlated to structural changes observed using X-ray diffraction at two different temperature ranges in the material. Analysis of high-energy X-ray scattering and specific heat capacity data revealed a transition from the cubic to tetragonal phase near Tm ∼ 320 K, whereas an additional increase in the tetragonality (c/a) of the polar phase is observed below Ts ∼ 270 K.
|
|
