| 1. |
- Arndt, D. S., et al.
(författare)
-
STATE OF THE CLIMATE IN 2017
- 2018
-
Ingår i: Bulletin of The American Meteorological Society - (BAMS). - : American Meteorological Society. - 0003-0007 .- 1520-0477. ; 99:8, s. S1-S310
-
Forskningsöversikt (refereegranskat)
|
|
| 2. |
- Ralimanana, H., et al.
(författare)
-
Madagascar’s extraordinary biodiversity: Threats and opportunities
- 2022
-
Ingår i: Science. - : American Association for the Advancement of Science (AAAS). - 0036-8075 .- 1095-9203. ; 378:6623
-
Forskningsöversikt (refereegranskat)abstract
- Madagascar’s unique biota is heavily affected by human activity and is under intense threat. Here, we review the current state of knowledge on the conservation status of Madagascar’s terrestrial and freshwater biodiversity by presenting data and analyses on documented and predicted species-level conservation statuses, the most prevalent and relevant threats, ex situ collections and programs, and the coverage and comprehensiveness of protected areas. The existing terrestrial protected area network in Madagascar covers 10.4% of its land area and includes at least part of the range of the majority of described native species of vertebrates with known distributions (97.1% of freshwater fishes, amphibians, reptiles, birds, and mammals combined) and plants (67.7%). The overall figures are higher for threatened species (97.7% of threatened vertebrates and 79.6% of threatened plants occurring within at least one protected area). International Union for Conservation of Nature (IUCN) Red List assessments and Bayesian neural network analyses for plants identify overexploitation of biological resources and unsustainable agriculture as the most prominent threats to biodiversity. We highlight five opportunities for action at multiple levels to ensure that conservation and ecological restoration objectives, programs, and activities take account of complex underlying and interacting factors and produce tangible benefits for the biodiversity and people of Madagascar.
|
|
| 3. |
- Antonelli, Alexandre, 1978, et al.
(författare)
-
Madagascar's extraordinary biodiversity : Evolution, distribution, and use
- 2022
-
Ingår i: Science. - : American Association for the Advancement of Science (AAAS). - 0036-8075 .- 1095-9203. ; 378:6623, s. 962-
-
Tidskriftsartikel (refereegranskat)abstract
- Madagascar's biota is hyperdiverse and includes exceptional levels of endemicity. We review the current state of knowledge on Madagascar's past and current terrestrial and freshwater biodiversity by compiling and presenting comprehensive data on species diversity, endemism, and rates of species description and human uses, in addition to presenting an updated and simplified map of vegetation types. We report a substantial increase of records and species new to science in recent years; however, the diversity and evolution of many groups remain practically unknown (e.g., fungi and most invertebrates). Digitization efforts are increasing the resolution of species richness patterns and we highlight the crucial role of field- and collections-based research for advancing biodiversity knowledge and identifying gaps in our understanding, particularly as species richness corresponds closely to collection effort. Phylogenetic diversity patterns mirror that of species richness and endemism in most of the analyzed groups. We highlight humid forests as centers of diversity and endemism because of their role as refugia and centers of recent and rapid radiations. However, the distinct endemism of other areas, such as the grassland-woodland mosaic of the Central Highlands and the spiny forest of the southwest, is also biologically important despite lower species richness. The documented uses of Malagasy biodiversity are manifold, with much potential for the uncovering of new useful traits for food, medicine, and climate mitigation. The data presented here showcase Madagascar as a unique " living laboratory" for our understanding of evolution and the complex interactions between people and nature. The gathering and analysis of biodiversity data must continue and accelerate if we are to fully understand and safeguard this unique subset of Earth's biodiversity.
|
|
| 4. |
- Schwantje, M., et al.
(författare)
-
Thermo-sensitive mitochondrial trifunctional protein deficiency presenting with episodic myopathy
- 2022
-
Ingår i: Journal of Inherited Metabolic Disease. - : Wiley. - 0141-8955 .- 1573-2665. ; 45:4, s. 819-831
-
Tidskriftsartikel (refereegranskat)abstract
- Mitochondrial trifunctional protein (MTP) is involved in long-chain fatty acid beta-oxidation (lcFAO). Deficiency of one or more of the enzyme activities as catalyzed by MTP causes generalized MTP deficiency (MTPD), long-chain hydroxyacyl-CoA dehydrogenase deficiency (LCHADD), or long-chain ketoacyl-CoA thiolase deficiency (LCKATD). When genetic variants result in thermo-sensitive enzymes, increased body temperature (e.g. fever) can reduce enzyme activity and be a risk factor for clinical decompensation. This is the first description of five patients with a thermo-sensitive MTP deficiency. Clinical and genetic information was obtained from clinical files. Measurement of LCHAD and LCKAT activities, lcFAO-flux studies and palmitate loading tests were performed in skin fibroblasts cultured at 37 degrees C and 40 degrees C. In all patients (four MTPD, one LCKATD), disease manifested during childhood (manifestation age: 2-10 years) with myopathic symptoms triggered by fever or exercise. In four patients, signs of retinopathy or neuropathy were present. Plasma long-chain acylcarnitines were normal or slightly increased. HADHB variants were identified (at age: 6-18 years) by whole exome sequencing or gene panel analyses. At 37 degrees C, LCHAD and LCKAT activities were mildly impaired and lcFAO-fluxes were normal. Remarkably, enzyme activities and lcFAO-fluxes were markedly diminished at 40 degrees C. Preventive (dietary) measures improved symptoms for most. In conclusion, all patients with thermo-sensitive MTP deficiency had a long diagnostic trajectory and both genetic and enzymatic testing were required for diagnosis. The frequent absence of characteristic acylcarnitine abnormalities poses a risk for a diagnostic delay. Given the positive treatment effects, upfront genetic screening may be beneficial to enhance early recognition.
|
|
| 5. |
|
|
| 6. |
- Moat, R. J., et al.
(författare)
-
Residual Stresses in Inertia-Friction-Welded Dissimilar High-Strength Steels
- 2009
-
Ingår i: Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. - : Springer Science and Business Media LLC. - 1073-5623. ; 40A:9, s. 2098-2108
-
Tidskriftsartikel (refereegranskat)abstract
- The welding of dissimilar alloys is seen increasingly as a way forward to improve efficiencies in modern aeroengines, because it allows one to tailor varying material property demands across a component. Dissimilar inertia friction welding (IFW) of two high-strength steels, Aermet 100 and S/CMV, has been identified as a possible joint for rotating gas turbine components and the resulting welds are investigated in this article. In order to understand the impact of the welding process and predict the life expectancy of such structures, a detailed understanding of the residual stress fields present in the welded component is needed. By combining energy-dispersive synchrotron X-ray diffraction (EDSXRD) and neutron diffraction, it has been possible to map the variations in lattice spacing of the ferritic phase on both sides of two tubular Aermet 100-S/CMV inertia friction welds (as-welded and postweld heat-treated condition) with a wall thickness of 37 mm. Laboratory-based XRD measurements were required to take into account the variation in the strain-free d-spacing across the weld region. It was found that, in the heat-affected zone (HAZ) slightly away from the weld line, residual stress fields showed tensile stresses increasing most dramatically in the hoop direction toward the weld line. Closer to the weld line, in the plastically affected zone, a sharp drop in the residual stresses was observed on both sides, although more dramatically in the S/CMV. In addition to residual stress mapping, synchrotron XRD measurements were carried out to map microstructural changes in thin slices cut from the welds. By studying the diffraction peak asymmetry of the 200-alpha diffraction peak, it was possible to demonstrate that a martensitic phase transformation in the S/CMV is responsible for the significant stress reduction close to the weld line. The postweld heat treatment (PWHT) chosen to avoid any overaging of the Aermet 100 and to temper the S/CMV martensite resulted in little stress relief on the S/CMV side of the weld.
|
|
| 7. |
- Paton, A., et al.
(författare)
-
Plant and fungal collections: Current status, future perspectives
- 2020
-
Ingår i: Plants People Planet. - : Wiley. - 2572-2611. ; 2:5, s. 499-514
-
Tidskriftsartikel (refereegranskat)abstract
- Societal Impact Statement Plant and fungal specimens provide the auditable evidence that a particular organism occurred at a particular place, and at a particular point in time, verifying past occurrence and distribution. They also document the aspects of human exploration and culture. Collectively specimens form a global asset with significant potential for new uses to help address societal and environmental challenges. Collections also serve as a platform to engage and educate a broad range of stakeholders from the academic to the public, strengthening engagement and understanding of plant and fungal diversity-the basis of life on Earth. SummaryWe provide a global review of the current state of plant and fungal collections including herbaria and fungaria, botanic gardens, fungal culture collections, and biobanks. The review focuses on the numbers of collections, major taxonomic group and species level coverage, geographical representation and the extent to which the data from collections are digitally accessible. We identify the major gaps in these collections and in digital data. We also consider what collection types need to be further developed to support research, such as environmental DNA and cryopreservation of desiccation-sensitive seeds. Around 31% of vascular plant species are represented in botanic gardens, and 17% of known fungal species are held in culture collections, both these living collections showing a bias toward northern temperate taxa. Only 21% of preserved collections are available via the Global Biodiversity Information Facility (GBIF) with Asia, central and north Africa and Amazonia being relatively under-represented. Supporting long-term collection facilities in biodiverse areas should be considered by governmental and international aid agencies, in addition to short-term project funding. Institutions should consider how best to speed up digitization of collections and to disseminate all data via aggregators such as GBIF, which will greatly facilitate use, research, and community curation to improve quality. There needs to be greater alignment between biodiversity informatics initiatives and standards to allow more comprehensive analysis of collections data and to facilitate linkage of extended information, facilitating broader use. Much can be achieved with greater coordination through existing initiatives and strengthening relationships with users.
|
|
| 8. |
- Ramjaun, T., et al.
(författare)
-
Effect of interpass temperature on residual stresses in multipass welds produced using low transformation temperature filler alloy
- 2014
-
Ingår i: Science and technology of welding and joining. - 1362-1718 .- 1743-2936. ; 19:1, s. 44-51
-
Tidskriftsartikel (refereegranskat)abstract
- Weld filler alloys that exploit transformation plasticity through low austenite to martensite transformation temperatures offer an effective method of reducing residual stresses in strong steel welds. However, in multipass welds, the heat input from later weld passes may be insufficient to retransform prior welding passes, leading to the accumulation of thermally induced strains and elevated residual stresses. In this work, the residual stress distributions produced around arc welds fabricated with a martensitic weld filler alloy that transforms at a low temperature have been studied as a function of the number of passes deposited and the interpass temperature. It is found that when the interpass temperature is above the transformation temperature of the weld metal, the entire multipass weld transforms as a single entity, thus permitting the optimum exploitation of the transformation plasticity. In contrast, the deposition of new metal with a relatively low interpass temperature leads to increased residual stresses in the underlying layers, reducing or eliminating the beneficial stress states previously created.
|
|
| 9. |
- Ramjaun, T., et al.
(författare)
-
Surface residual stresses in multipass welds produced using low transformation temperature filler alloys
- 2014
-
Ingår i: Science and technology of welding and joining. - 1362-1718 .- 1743-2936. ; 19:7, s. 623-630
-
Tidskriftsartikel (refereegranskat)abstract
- Tensile residual stresses at the surface of welded components are known to compromise fatigue resistance through the accelerated initiation of microcracks, especially at the weld toe. Inducement of compression in these regions is a common technique employed to enhance fatigue performance. Transformation plasticity has been established as a viable method to generate such compressive residual stresses in steel welds and exploits the phase transformation in welding filler alloys that transform at low temperature to compensate for accumulated thermal contraction strains. Neutron and X-ray diffraction have been used to determine the stress profiles that exist across the surface of plates welded with low transformation temperature welding alloys, with a particular focus on the stress at the weld toe. For the first time, near surface neutron diffraction data have shown the extent of local stress variation at the critical, fusion boundary location. Compression was evident for the three measurement orientations at the fusion boundaries. Compressive longitudinal residual stresses and tensile transverse stresses were measured in the weld metal.
|
|
| 10. |
- Simm, T. H., et al.
(författare)
-
The τ-plot, a multicomponent 1-D pole figure plot, to quantify the heterogeneity of plastic deformation
- 2020
-
Ingår i: Materials Characterization. - : Elsevier Inc.. - 1044-5803 .- 1873-4189. ; 160
-
Tidskriftsartikel (refereegranskat)abstract
- An approach is presented that allows multi-scale characterisations of heterogeneous deformation in crystalline materials by employing a range of characterisation techniques including: electron backscatter diffraction, digital image correlation and neutron diffraction powder measurements. The approach will be used to obtain critical information about the variations in parameters that characterise the deformed state in different crystallographic orientation texture components of a sample in a statistically significant way. These parameters include lattice strains, texture evolution, peak broadening, dislocation density, planar faults, phase changes and surface strain. This approach allows verification of models of plastic deformation to provide a more detailed view of plastic deformation heterogeneity at multiple length scales than obtained by other characterisation approaches. The approach demonstrated here is applied to two stainless steel alloys; an alloy that exhibits phase transformation during deformation and an alloy that remains the same phase all through deformation process.
|
|
| 11. |
|
|
| 12. |
|
|
