| 1. |
-
- 2018
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 58:1
-
Forskningsöversikt (refereegranskat)
|
|
| 2. |
- Joffrin, E., et al.
(författare)
-
Overview of the JET preparation for deuterium-tritium operation with the ITER like-wall
- 2019
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 59:11
-
Forskningsöversikt (refereegranskat)abstract
- For the past several years, the JET scientific programme (Pamela et al 2007 Fusion Eng. Des. 82 590) has been engaged in a multi-campaign effort, including experiments in D, H and T, leading up to 2020 and the first experiments with 50%/50% D-T mixtures since 1997 and the first ever D-T plasmas with the ITER mix of plasma-facing component materials. For this purpose, a concerted physics and technology programme was launched with a view to prepare the D-T campaign (DTE2). This paper addresses the key elements developed by the JET programme directly contributing to the D-T preparation. This intense preparation includes the review of the physics basis for the D-T operational scenarios, including the fusion power predictions through first principle and integrated modelling, and the impact of isotopes in the operation and physics of D-T plasmas (thermal and particle transport, high confinement mode (H-mode) access, Be and W erosion, fuel recovery, etc). This effort also requires improving several aspects of plasma operation for DTE2, such as real time control schemes, heat load control, disruption avoidance and a mitigation system (including the installation of a new shattered pellet injector), novel ion cyclotron resonance heating schemes (such as the three-ions scheme), new diagnostics (neutron camera and spectrometer, active Alfven eigenmode antennas, neutral gauges, radiation hard imaging systems...) and the calibration of the JET neutron diagnostics at 14 MeV for accurate fusion power measurement. The active preparation of JET for the 2020 D-T campaign provides an incomparable source of information and a basis for the future D-T operation of ITER, and it is also foreseen that a large number of key physics issues will be addressed in support of burning plasmas.
|
|
| 3. |
- Bombarda, F., et al.
(författare)
-
Runaway electron beam control
- 2019
-
Ingår i: Plasma Physics and Controlled Fusion. - : IOP Publishing. - 1361-6587 .- 0741-3335. ; 61:1
-
Tidskriftsartikel (refereegranskat)
|
|
| 4. |
- Krasilnikov, A., et al.
(författare)
-
Evidence of 9 Be + p nuclear reactions during 2ω CH and hydrogen minority ICRH in JET-ILW hydrogen and deuterium plasmas
- 2018
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 58:2
-
Tidskriftsartikel (refereegranskat)abstract
- The intensity of 9Be + p nuclear fusion reactions was experimentally studied during second harmonic (2ω CH) ion-cyclotron resonance heating (ICRH) and further analyzed during fundamental hydrogen minority ICRH of JET-ILW hydrogen and deuterium plasmas. In relatively low-density plasmas with a high ICRH power, a population of fast H+ ions was created and measured by neutral particle analyzers. Primary and secondary nuclear reaction products, due to 9Be + p interaction, were observed with fast ion loss detectors, γ-ray spectrometers and neutron flux monitors and spectrometers. The possibility of using 9Be(p, d)2α and 9Be(p, α)6Li nuclear reactions to create a population of fast alpha particles and study their behaviour in non-active stage of ITER operation is discussed in the paper.
|
|
| 5. |
- Murari, A., et al.
(författare)
-
A control oriented strategy of disruption prediction to avoid the configuration collapse of tokamak reactors
- 2024
-
Ingår i: Nature Communications. - 2041-1723 .- 2041-1723. ; 15:1
-
Tidskriftsartikel (refereegranskat)abstract
- The objective of thermonuclear fusion consists of producing electricity from the coalescence of light nuclei in high temperature plasmas. The most promising route to fusion envisages the confinement of such plasmas with magnetic fields, whose most studied configuration is the tokamak. Disruptions are catastrophic collapses affecting all tokamak devices and one of the main potential showstoppers on the route to a commercial reactor. In this work we report how, deploying innovative analysis methods on thousands of JET experiments covering the isotopic compositions from hydrogen to full tritium and including the major D-T campaign, the nature of the various forms of collapse is investigated in all phases of the discharges. An original approach to proximity detection has been developed, which allows determining both the probability of and the time interval remaining before an incoming disruption, with adaptive, from scratch, real time compatible techniques. The results indicate that physics based prediction and control tools can be developed, to deploy realistic strategies of disruption avoidance and prevention, meeting the requirements of the next generation of devices.
|
|
| 6. |
|
|
| 7. |
|
|
| 8. |
|
|
| 9. |
|
|
| 10. |
|
|
| 11. |
|
|
| 12. |
|
|
| 13. |
|
|
| 14. |
|
|
| 15. |
|
|
| 16. |
|
|
| 17. |
|
|
| 18. |
|
|
| 19. |
|
|
| 20. |
|
|
| 21. |
|
|
| 22. |
|
|
| 23. |
|
|
| 24. |
|
|
| 25. |
|
|
| 26. |
|
|
| 27. |
|
|
| 28. |
|
|
| 29. |
-
Overview of the JET results
- 2015
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 0029-5515 .- 1741-4326. ; 55:10
-
Tidskriftsartikel (refereegranskat)
|
|
| 30. |
-
- 2018
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 58:9
-
Tidskriftsartikel (refereegranskat)
|
|
| 31. |
- Meyer, H., et al.
(författare)
-
Overview of progress in European medium sized tokamaks towards an integrated plasma-edge/wall solution
- 2017
-
Ingår i: Nuclear Fusion. - : Institute of Physics Publishing (IOPP). - 0029-5515 .- 1741-4326. ; 57:10
-
Tidskriftsartikel (refereegranskat)abstract
- Integrating the plasma core performance with an edge and scrape-off layer (SOL) that leads to tolerable heat and particle loads on the wall is a major challenge. The new European medium size tokamak task force (EU-MST) coordinates research on ASDEX Upgrade (AUG), MAST and TCV. This multi-machine approach within EU-MST, covering a wide parameter range, is instrumental to progress in the field, as ITER and DEMO core/pedestal and SOL parameters are not achievable simultaneously in present day devices. A two prong approach is adopted. On the one hand, scenarios with tolerable transient heat and particle loads, including active edge localised mode (ELM) control are developed. On the other hand, divertor solutions including advanced magnetic configurations are studied. Considerable progress has been made on both approaches, in particular in the fields of: ELM control with resonant magnetic perturbations (RMP), small ELM regimes, detachment onset and control, as well as filamentary scrape-off-layer transport. For example full ELM suppression has now been achieved on AUG at low collisionality with n = 2 RMP maintaining good confinement H-H(98,H-y2) approximate to 0.95. Advances have been made with respect to detachment onset and control. Studies in advanced divertor configurations (Snowflake, Super-X and X-point target divertor) shed new light on SOL physics. Cross field filamentary transport has been characterised in a wide parameter regime on AUG, MAST and TCV progressing the theoretical and experimental understanding crucial for predicting first wall loads in ITER and DEMO. Conditions in the SOL also play a crucial role for ELM stability and access to small ELM regimes.
|
|
| 32. |
- Meyer, H., et al.
(författare)
-
Overview of progress in European medium sized tokamaks towards an integrated plasma-edge/wall solution
- 2017
-
Ingår i: Nuclear Fusion. - : Institute of Physics Publishing (IOPP). - 0029-5515 .- 1741-4326. ; 57:10
-
Tidskriftsartikel (refereegranskat)abstract
- Integrating the plasma core performance with an edge and scrape-off layer (SOL) that leads to tolerable heat and particle loads on the wall is a major challenge. The new European medium size tokamak task force (EU-MST) coordinates research on ASDEX Upgrade (AUG), MAST and TCV. This multi-machine approach within EU-MST, covering a wide parameter range, is instrumental to progress in the field, as ITER and DEMO core/pedestal and SOL parameters are not achievable simultaneously in present day devices. A two prong approach is adopted. On the one hand, scenarios with tolerable transient heat and particle loads, including active edge localised mode (ELM) control are developed. On the other hand, divertor solutions including advanced magnetic configurations are studied. Considerable progress has been made on both approaches, in particular in the fields of: ELM control with resonant magnetic perturbations (RMP), small ELM regimes, detachment onset and control, as well as filamentary scrape-off-layer transport. For example full ELM suppression has now been achieved on AUG at low collisionality with n = 2 RMP maintaining good confinement H-H(98,H-y2) approximate to 0.95. Advances have been made with respect to detachment onset and control. Studies in advanced divertor configurations (Snowflake, Super-X and X-point target divertor) shed new light on SOL physics. Cross field filamentary transport has been characterised in a wide parameter regime on AUG, MAST and TCV progressing the theoretical and experimental understanding crucial for predicting first wall loads in ITER and DEMO. Conditions in the SOL also play a crucial role for ELM stability and access to small ELM regimes.
|
|
| 33. |
- Labit, B., et al.
(författare)
-
Dependence on plasma shape and plasma fueling for small edge-localized mode regimes in TCV and ASDEX Upgrade
- 2019
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 59:8
-
Tidskriftsartikel (refereegranskat)abstract
- © 2019 Institute of Physics Publishing. All rights reserved. Within the EUROfusion MST1 work package, a series of experiments has been conducted on AUG and TCV devices to disentangle the role of plasma fueling and plasma shape for the onset of small ELM regimes. On both devices, small ELM regimes with high confinement are achieved if and only if two conditions are fulfilled at the same time. Firstly, the plasma density at the separatrix must be large enough (ne,sep/nG ∼ 0.3), leading to a pressure profile flattening at the separatrix, which stabilizes type-I ELMs. Secondly, the magnetic configuration has to be close to a double null (DN), leading to a reduction of the magnetic shear in the extreme vicinity of the separatrix. As a consequence, its stabilizing effect on ballooning modes is weakened.
|
|
| 34. |
- Reimerdes, H., et al.
(författare)
-
Overview of the TCV tokamak experimental programme
- 2022
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 62:4
-
Tidskriftsartikel (refereegranskat)abstract
- The tokamak a configuration variable (TCV) continues to leverage its unique shaping capabilities, flexible heating systems and modern control system to address critical issues in preparation for ITER and a fusion power plant. For the 2019-20 campaign its configurational flexibility has been enhanced with the installation of removable divertor gas baffles, its diagnostic capabilities with an extensive set of upgrades and its heating systems with new dual frequency gyrotrons. The gas baffles reduce coupling between the divertor and the main chamber and allow for detailed investigations on the role of fuelling in general and, together with upgraded boundary diagnostics, test divertor and edge models in particular. The increased heating capabilities broaden the operational regime to include T (e)/T (i) similar to 1 and have stimulated refocussing studies from L-mode to H-mode across a range of research topics. ITER baseline parameters were reached in type-I ELMy H-modes and alternative regimes with 'small' (or no) ELMs explored. Most prominently, negative triangularity was investigated in detail and confirmed as an attractive scenario with H-mode level core confinement but an L-mode edge. Emphasis was also placed on control, where an increased number of observers, actuators and control solutions became available and are now integrated into a generic control framework as will be needed in future devices. The quantity and quality of results of the 2019-20 TCV campaign are a testament to its successful integration within the European research effort alongside a vibrant domestic programme and international collaborations.
|
|
| 35. |
- Bécoulet, A., et al.
(författare)
-
Science and technology research and development in support to ITER and the Broader Approach at CEA
- 2013
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 53:10
-
Tidskriftsartikel (refereegranskat)abstract
- In parallel to the direct contribution to the procurement phase of ITER and Broader Approach, CEA has initiated research & development programmes, accompanied by experiments together with a significant modelling effort, aimed at ensuring robust operation, plasma performance, as well as mitigating the risks of the procurement phase. This overview reports the latest progress in both fusion science and technology including many areas, namely the mitigation of superconducting magnet quenches, disruption-generated runaway electrons, edge-localized modes (ELMs), the development of imaging surveillance, and heating and current drive systems for steady-state operation. The WEST (W Environment for Steady-state Tokamaks) project, turning Tore Supra into an actively cooled W-divertor platform open to the ITER partners and industries, is presented.
|
|
| 36. |
- Coda, S., et al.
(författare)
-
Overview of the TCV tokamak program : Scientific progress and facility upgrades
- 2017
-
Ingår i: Nuclear Fusion. - : Institute of Physics Publishing. - 0029-5515 .- 1741-4326. ; 57:10
-
Tidskriftsartikel (refereegranskat)abstract
- The TCV tokamak is augmenting its unique historical capabilities (strong shaping, strong electron heating) with ion heating, additional electron heating compatible with high densities, and variable divertor geometry, in a multifaceted upgrade program designed to broaden its operational range without sacrificing its fundamental flexibility. The TCV program is rooted in a three-pronged approach aimed at ITER support, explorations towards DEMO, and fundamental research. A 1 MW, tangential neutral beam injector (NBI) was recently installed and promptly extended the TCV parameter range, with record ion temperatures and toroidal rotation velocities and measurable neutral-beam current drive. ITER-relevant scenario development has received particular attention, with strategies aimed at maximizing performance through optimized discharge trajectories to avoid MHD instabilities, such as peeling-ballooning and neoclassical tearing modes. Experiments on exhaust physics have focused particularly on detachment, a necessary step to a DEMO reactor, in a comprehensive set of conventional and advanced divertor concepts. The specific theoretical prediction of an enhanced radiation region between the two X-points in the low-field-side snowflake-minus configuration was experimentally confirmed. Fundamental investigations of the power decay length in the scrape-off layer (SOL) are progressing rapidly, again in widely varying configurations and in both D and He plasmas; in particular, the double decay length in L-mode limited plasmas was found to be replaced by a single length at high SOL resistivity. Experiments on disruption mitigation by massive gas injection and electron-cyclotron resonance heating (ECRH) have begun in earnest, in parallel with studies of runaway electron generation and control, in both stable and disruptive conditions; a quiescent runaway beam carrying the entire electrical current appears to develop in some cases. Developments in plasma control have benefited from progress in individual controller design and have evolved steadily towards controller integration, mostly within an environment supervised by a tokamak profile control simulator. TCV has demonstrated effective wall conditioning with ECRH in He in support of the preparations for JT-60SA operation.
|
|
| 37. |
- Marco, Aitor, et al.
(författare)
-
A Variable Structure Control Scheme Proposal for the Tokamak a Configuration Variable
- 2019
-
Ingår i: Complexity. - : Hindawi Publishing Corporation. - 1076-2787 .- 1099-0526.
-
Tidskriftsartikel (refereegranskat)abstract
- Fusion power is the most significant prospects in the long-term future of energy in the sense that it composes a potentially clean, cheap, and unlimited power source that would substitute the widespread traditional nonrenewable energies, reducing the geographical dependence on their sources as well as avoiding collateral environmental impacts. Although the nuclear fusion research started in the earlier part of 20th century and the fusion reactors have been developed since the 1950s, the fusion reaction processes achieved have not yet obtained net power, since the generated plasma requires more energy to achieve and remain in necessary particular pressure and temperature conditions than the produced profitable energy. For this purpose, the plasma has to be confined inside a vacuum vessel, as it is the case of the Tokamak reactor, which consists of a device that generates magnetic fields within a toroidal chamber, being one of the most promising solutions nowadays. However, the Tokamak reactors still have several issues such as the presence of plasma instabilities that provokes a decay of the fusion reaction and, consequently, a reduction in the pulse duration. In this sense, since long pulse reactions are the key to produce net power, the use of robust and fast controllers arises as a useful tool to deal with the unpredictability and the small time constant of the plasma behavior. In this context, this article focuses on the application of robust control laws to improve the controllability of the plasma current, a crucial parameter during the plasma heating and confinement processes. In particular, a variable structure control scheme based on sliding surfaces, namely, a sliding mode controller (SMC) is presented and applied to the plasma current control problem. In order to test the validity and goodness of the proposed controller, its behavior is compared to that of the traditional PID schemes applied in these systems, using the RZIp model for the Tokamak a Configuration Variable (TCV) reactor. The obtained results are very promising, leading to consider this controller as a strong candidate to enhance the performance of the PID-based controllers usually employed in this kind of systems.
|
|
| 38. |
- Harrison, J.R., et al.
(författare)
-
Overview of new MAST physics in anticipation of first results from MAST Upgrade
- 2019
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 59:11
-
Forskningsöversikt (refereegranskat)abstract
- The mega amp spherical tokamak (MAST) was a low aspect ratio device (R/a = 0.85/0.65 ∼ 1.3) with similar poloidal cross-section to other medium-size tokamaks. The physics programme concentrates on addressing key physics issues for the operation of ITER, design of DEMO and future spherical tokamaks by utilising high resolution diagnostic measurements closely coupled with theory and modelling to significantly advance our understanding. An empirical scaling of the energy confinement time that favours higher power, lower collisionality devices is consistent with gyrokinetic modelling of electron scale turbulence. Measurements of ion scale turbulence with beam emission spectroscopy and gyrokinetic modelling in up-down symmetric plasmas find that the symmetry of the turbulence is broken by flow shear. Near the non-linear stability threshold, flow shear tilts the density fluctuation correlation function and skews the fluctuation amplitude distribution. Results from fast particle physics studies include the observation that sawteeth are found to redistribute passing and trapped fast particles injected from neutral beam injectors in equal measure, suggesting that resonances between the m = 1 perturbation and the fast ion orbits may be playing a dominant role in the fast ion transport. Measured D-D fusion products from a neutron camera and a charged fusion product detector are 40% lower than predictions from TRANSP/NUBEAM, highlighting possible deficiencies in the guiding centre approximation. Modelling of fast ion losses in the presence of resonant magnetic perturbations (RMPs) can reproduce trends observed in experiments when the plasma response and charge-exchange losses are accounted for. Measurements with a neutral particle analyser during merging-compression start-up indicate the acceleration of ions and electrons. Transport at the plasma edge has been improved through reciprocating probe measurements that have characterised a geodesic acoustic mode at the edge of an ohmic L-mode plasma and particle-in-cell modelling has improved the interpretation of plasma potential estimates from ball-pen probes. The application of RMPs leads to a reduction in particle confinement in L-mode and H-mode and an increase in the core ionization source. The ejection of secondary filaments following type-I ELMs correlates with interactions with surfaces near the X-point. Simulations of the interaction between pairs of filaments in the scrape-off layer suggest this results in modest changes to their velocity, and in most cases can be treated as moving independently. A stochastic model of scrape-off layer profile formation based on the superposition of non-interacting filaments is in good agreement with measured time-average profiles. Transport in the divertor has been improved through fast camera imaging, indicating the presence of a quiescent region devoid of filament near the X-point, extending from the separatrix to ψ n ∼ 1.02. Simulations of turbulent transport in the divertor show that the angle between the divertor leg on the curvature vector strongly influences transport into the private flux region via the interchange mechanism. Coherence imaging measurements show counter-streaming flows of impurities due to gas puffing increasing the pressure on field lines where the gas is ionised. MAST Upgrade is based on the original MAST device, with substantially improved capabilities to operate with a Super-X divertor to test extended divertor leg concepts. SOLPS-ITER modelling predicts the detachment threshold will be reduced by more than a factor of 2, in terms of upstream density, in the Super-X compared with a conventional configuration and that the radiation front movement is passively stabilised before it reaches the X-point. 1D fluid modelling reveals the key role of momentum and power loss mechanisms in governing detachment onset and evolution. Analytic modelling indicates that long legs placed at large major radius, or equivalently low at the target compared with the X-point are more amenable to external control. With MAST Upgrade experiments expected in 2019, a thorough characterisation of the sources of the intrinsic error field has been carried out and a mitigation strategy developed.
|
|
| 39. |
- Cunningham, S. G., et al.
(författare)
-
Core Standards of the EUBIRO Project Defining a European Diabetes Data Dictionary for Clinical Audit and Healthcare Delivery
- 2016
-
Ingår i: Methods of Information in Medicine. - : Georg Thieme Verlag KG. - 0026-1270 .- 2511-705X. ; 55:2, s. 166-176
-
Tidskriftsartikel (refereegranskat)abstract
- Background: A set of core diabetes indicators were identified in a clinical review of current evidence for the EUBIROD project. In order to allow accurate comparisons of diabetes indicators, a standardised currency for data storage and aggregation was required. We aimed to define a robust European data dictionary with appropriate clinical definitions that can be used to analyse diabetes outcomes and provide the foundation for data collection from existing electronic health records for diabetes. Methods: Existing clinical datasets used by 15 partner institutions across Europe were collated and common data items analysed for consistency in terms of recording, data definition and units of measurement. Where necessary, data mappings and algorithms were specified in order to allow partners to meet the standard definitions. A series of descriptive elements were created to document metadata for each data item, including recording, consistency, completeness and quality. Results: While datasets varied in terms of consistency, it was possible to create a common standard that could be used by all. The minimum dataset defined 53 data items that were classified according to their feasibility and validity. Mappings and standardised definitions were used to create an electronic directory for diabetes care, providing the foundation for the EUBIROD data analysis repository, also used to implement the diabetes registry and model of care for Cyprus. Conclusions: The development of data dictionaries and standards can be used to improve the quality and comparability of health information. A data dictionary has been developed to be compatible with other existing data sources for diabetes, within and beyond Europe.
|
|
| 40. |
- Cunningham, S G, et al.
(författare)
-
Core Standards of the EUBIROD Project. Defining a European Diabetes Data Dictionary for Clinical Audit and Healthcare Delivery.
- 2016
-
Ingår i: Methods of information in medicine. - 2511-705X. ; 55:2, s. 166-76
-
Tidskriftsartikel (refereegranskat)abstract
- A set of core diabetes indicators were identified in a clinical review of current evidence for the EUBIROD project. In order to allow accurate comparisons of diabetes indicators, a standardised currency for data storage and aggregation was required. We aimed to define a robust European data dictionary with appropriate clinical definitions that can be used to analyse diabetes outcomes and provide the foundation for data collection from existing electronic health records for diabetes.Existing clinical datasets used by 15 partner institutions across Europe were collated and common data items analysed for consistency in terms of recording, data definition and units of measurement. Where necessary, data mappings and algorithms were specified in order to allow partners to meet the standard definitions. A series of descriptive elements were created to document metadata for each data item, including recording, consistency, completeness and quality.While datasets varied in terms of consistency, it was possible to create a common standard that could be used by all. The minimum dataset defined 53 data items that were classified according to their feasibility and validity. Mappings and standardised definitions were used to create an electronic directory for diabetes care, providing the foundation for the EUBIROD data analysis repository, also used to implement the diabetes registry and model of care for Cyprus.The development of data dictionaries and standards can be used to improve the quality and comparability of health information. A data dictionary has been developed to be compatible with other existing data sources for diabetes, within and beyond Europe.
|
|
| 41. |
- Giroud, C., et al.
(författare)
-
Integration of a radiative divertor for heat load control into JET high triangularity ELMy H-mode plasmas
- 2012
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 0029-5515 .- 1741-4326. ; 52:6, s. 063022-
-
Tidskriftsartikel (refereegranskat)abstract
- Experiments on JET with a carbon-fibre composite wall have explored the reduction of steady-state power load in an ELMy H-mode scenario at high Greenwald fraction similar to 0.8, constant power and close to the L to H transition. This paper reports a systematic study of power load reduction due to the effect of fuelling in combination with seeding over a wide range of pedestal density ((4-8) x 10(19) m(-3)) with detailed documentation of divertor, pedestal and main plasma conditions, as well as a comparative study of two extrinsic impurity nitrogen and neon. It also reports the impact of steady-state power load reduction on the overall plasma behaviour, as well as possible control parameters to increase fuel purity. Conditions from attached to fully detached divertor were obtained during this study. These experiments provide reference plasmas for comparison with a future JET Be first wall and an all W divertor where the power load reduction is mandatory for operation.
|
|
| 42. |
- Jordanova, V. K., et al.
(författare)
-
Specification of the near-Earth space environment with SHIELDS
- 2018
-
Ingår i: Journal of Atmospheric and Solar-Terrestrial Physics. - : PERGAMON-ELSEVIER SCIENCE LTD. - 1364-6826 .- 1879-1824. ; 177, s. 148-159
-
Tidskriftsartikel (refereegranskat)abstract
- Predicting variations in the near-Earth space environment that can lead to spacecraft damage and failure is one example of "space weather" and a big space physics challenge. A project recently funded through the Los Alamos National Laboratory (LANL) Directed Research and Development (LDRD) program aims at developing a new capability to understand, model, and predict Space Hazards Induced near Earth by Large Dynamic Storms, the SHIELDS framework. The project goals are to understand the dynamics of the surface charging environment (SCE), the hot (keV) electrons representing the source and seed populations for the radiation belts, on both macro and micro-scale. Important physics questions related to particle injection and acceleration associated with magnetospheric storms and substorms, as well as plasma waves, are investigated. These challenging problems are addressed using a team of world-class experts in the fields of space science and computational plasma physics, and state-of-the-art models and computational facilities. A full two-way coupling of physics-based models across multiple scales, including a global MHD (BATS-R-US) embedding a particle-in-cell (iPIC3D) and an inner magnetosphere (RAM-SCB) codes, is achieved. New data assimilation techniques employing in situ satellite data are developed; these provide an order of magnitude improvement in the accuracy in the simulation of the SCE. SHIELDS also includes a post-processing tool designed to calculate the surface charging for specific spacecraft geometry using the Curvilinear Particle-In-Cell (CPIC) code that can be used for reanalysis of satellite failures or for satellite design.
|
|
| 43. |
- Tiegs, Scott D., et al.
(författare)
-
Global patterns and drivers of ecosystem functioning in rivers and riparian zones
- 2019
-
Ingår i: Science Advances. - Washington : American Association of Advancement in Science. - 2375-2548. ; 5:1
-
Tidskriftsartikel (refereegranskat)abstract
- River ecosystems receive and process vast quantities of terrestrial organic carbon, the fate of which depends strongly on microbial activity. Variation in and controls of processing rates, however, are poorly characterized at the global scale. In response, we used a peer-sourced research network and a highly standardized carbon processing assay to conduct a global-scale field experiment in greater than 1000 river and riparian sites. We found that Earth's biomes have distinct carbon processing signatures. Slow processing is evident across latitudes, whereas rapid rates are restricted to lower latitudes. Both the mean rate and variability decline with latitude, suggesting temperature constraints toward the poles and greater roles for other environmental drivers (e.g., nutrient loading) toward the equator. These results and data set the stage for unprecedented "next-generation biomonitoring" by establishing baselines to help quantify environmental impacts to the functioning of ecosystems at a global scale.
|
|
| 44. |
- Bandelt, HJ, et al.
(författare)
-
Quasi-median graphs from sets of partitions
- 2002
-
Ingår i: Discrete Applied Mathematics. - 0166-218X .- 1872-6771. ; 122:23-35, s. 23-35
-
Tidskriftsartikel (populärvet., debatt m.m.)abstract
- In studies of molecular evolution, one is typically confronted with the task of inferring a phylogenetic tree from a set X of sequences of length n over a finite alphabet Lambda. For studies that invoke parsimony, it has been found helpful to consider the quasi-median graph generated by X in the Hamming graph Lambda(n). Although a great deal is already known about quasi-median graphs (and their algebraic counterparts), little is known about the quasi-median generation in Lambda(n) starting from a set X of vertices. We describe the vertices of the quasi-median graph generated by X in terms of the coordinatewise partitions of X. In particular, we clarify when the generated quasi-median graph is the so-called relation graph associated with X. This immediately characterizes the instances where either a block graph or the total Hamming graph is generated.
|
|
| 45. |
- Brett, Michael T., et al.
(författare)
-
How important are terrestrial organic carbon inputs for secondary production in freshwater ecosystems?
- 2017
-
Ingår i: Freshwater Biology. - : WILEY. - 0046-5070 .- 1365-2427. ; 62:5, s. 833-853
-
Forskningsöversikt (refereegranskat)abstract
- 1. Many freshwater systems receive substantial inputs of terrestrial organic matter. Terrestrially derived dissolved organic carbon (t-DOC) inputs can modify light availability, the spatial distribution of primary production, heat, and oxygen in aquatic systems, as well as inorganic nutrient bioavailability. It is also well-established that some terrestrial inputs (such as invertebrates and fruits) provide high-quality food resources for consumers in some systems. 2. In small to moderate-sized streams, leaf litter inputs average approximately three times greater than the autochthonous production. Conversely, in oligo/mesotrophic lakes algal production is typically five times greater than the available flux of allochthonous basal resources. 3. Terrestrial particulate organic carbon (t-POC) inputs to lakes and rivers are comprised of 80%-90% biochemically recalcitrant lignocellulose, which is highly resistant to enzymatic breakdown by animal consumers. Further, t-POC and heterotrophic bacteria lack essential biochemical compounds that are critical for rapid growth and reproduction in aquatic invertebrates and fishes. Several studies have directly shown that these resources have very low food quality for herbivorous zooplankton and benthic invertebrates 4. Much of the nitrogen assimilated by stream consumers is probably of algal origin, even in systems where there appears to be a significant terrestrial carbon contribution. Amino acid stable isotope analyses for large river food webs indicate that most upper trophic level essential amino acids are derived from algae. Similarly, profiles of essential fatty acids in consumers show a strong dependence on the algal food resources. 5. Primary production to respiration ratios are not a meaningful index to assess consumer allochthony because respiration represents an oxidised carbon flux that cannot be utilised by animal consumers. Rather, the relative importance of allochthonous subsidies for upper trophic level production should be addressed by considering the rates at which terrestrial and autochthonous resources are consumed and the growth efficiency supported by this food. 6. Ultimately, the biochemical composition of a particular basal resource, and not just its quantity or origin, determines how readily this material is incorporated into upper trophic level consumers. Because of its highly favourable biochemical composition and greater availability, we conclude that microalgal production supports most animal production in freshwater ecosystems.
|
|
| 46. |
- Brysting, A. K., et al.
(författare)
-
Untangling complex histories of genome mergings in high polyploids
- 2007
-
Ingår i: Systematic Biology. - : Oxford University Press (OUP). - 1063-5157 .- 1076-836X. ; 56:3, s. 467-476
-
Tidskriftsartikel (refereegranskat)abstract
- Polyploidy, the duplication of entire genomes, plays a major role in plant evolution. In allopolyploids, genome duplication is associated with hybridization between two or more divergent genomes. Successive hybridization and polyploidization events can build up species complexes of allopolyploids with complicated network-like histories, and the evolutionary history of many plant groups cannot be adequately represented by phylogenetic trees because of such reticulate events. The history of complex genome mergings within a high-polyploid species complex in the genus Cerastium (Caryophyllaceae) is here untangled by the use of a network algorithm and noncoding sequences of a low-copy number gene. The resulting network illustrates how hybridization and polyploidization have acted as key evolutionary processes in creating a plant group where high-level allopolyploids clearly outnumber extant parental genomes.
|
|
| 47. |
- Cieslik, D, et al.
(författare)
-
Connectivity calculus
- 2003
-
Ingår i: Applied Mathematics Letters. - 0893-9659 .- 1873-5452. ; 16:3, s. 395-399
-
Tidskriftsartikel (refereegranskat)abstract
- Given a finite hypergraph H = (V, E) and, for each e E E, a collection of nonempty subsets pi(e) of e, Mobius inversion is used to establish a recursive formula for the number of connected components of the hypergraph H = (V, boolean OR(eis an element ofE)pi(e)). As shown elsewhere, this formula is an essential ingredient in the context of a certain divide-and-conquer strategy that allows us to define a dynamical programming scheme solving Steiner's problem for graphs in linear time (however, with a constant depending hyperexponentially on their tree width).
|
|
| 48. |
- Cieslik, D., et al.
(författare)
-
Connectivity calculus
- 2003
-
Ingår i: Applied Mathematical Letters. ; 16, s. 395-399
-
Tidskriftsartikel (refereegranskat)
|
|
| 49. |
- Dress, A., et al.
(författare)
-
Affine maps that induce polyhedral complex isomorphisms
- 2000
-
Ingår i: Discrete & Computational Geometry. - 0179-5376 .- 1432-0444. ; 24:1, s. 49-60
-
Tidskriftsartikel (refereegranskat)abstract
- In this paper we show that an affine bijection f: T-1 --> T-2 between two polyhedral complexes T-1, T-2, both of which consist of a union of faces of two convex polyhedra P-1 and P-2, necessarily respects the cell-complex structure of T-1 and T-2 inherited from P-1 and P-2, respectively, provided f extends to an affine map from P-1 into P-2. In addition, we present an application of this result within the area of T-theory to obtain a far-reaching generalization of previous results regarding the equivalence of two distinct constructions of the phylogenetic tree associated to "perfect" (that is, treelike) distance data.
|
|
| 50. |
|
|
