| 1. |
- Thomas, HS, et al.
(författare)
-
- 2019
-
swepub:Mat__t
|
|
| 2. |
|
|
| 3. |
- Lacour, S., et al.
(författare)
-
The mass of β Pictoris c from β Pictoris b orbital motion
- 2021
-
Ingår i: Astronomy and Astrophysics. - : EDP Sciences. - 0004-6361 .- 1432-0746. ; 654
-
Tidskriftsartikel (refereegranskat)abstract
- Aims. We aim to demonstrate that the presence and mass of an exoplanet can now be effectively derived from the astrometry of another exoplanet.Methods. We combined previous astrometry of β Pictoris b with a new set of observations from the GRAVITY interferometer. The orbital motion of β Pictoris b is fit using Markov chain Monte Carlo simulations in Jacobi coordinates. The inner planet, β Pictoris c, was also reobserved at a separation of 96 mas, confirming the previous orbital estimations.Results. From the astrometry of planet b only, we can (i) detect the presence of β Pictoris c and (ii) constrain its mass to 10.04(-3.10)(+4.53) M-Jup. If one adds the astrometry of β Pictoris c, the mass is narrowed down to 9.15(-1.06)(+1.08) M-Jup. The inclusion of radial velocity measurements does not affect the orbital parameters significantly, but it does slightly decrease the mass estimate to 8.89(-0.75)(+0.75) M-Jup. With a semimajor axis of 2.68 +/- 0.02 au, a period of 1221 +/- 15 days, and an eccentricity of 0.32 +/- 0.02, the orbital parameters of β Pictoris c are now constrained as precisely as those of β Pictoris b. The orbital configuration is compatible with a high-order mean-motion resonance (7:1). The impact of the resonance on the planets' dynamics would then be negligible with respect to the secular perturbations, which might have played an important role in the eccentricity excitation of the outer planet.
|
|
| 4. |
- Lagrange, A. M., et al.
(författare)
-
Unveiling the beta Pictoris system, coupling high contrast imaging, interferometric, and radial velocity data
- 2020
-
Ingår i: Astronomy and Astrophysics. - : EDP Sciences. - 0004-6361 .- 1432-0746. ; 642
-
Tidskriftsartikel (refereegranskat)abstract
- Context. The nearby and young beta Pictoris system hosts a well resolved disk, a directly imaged massive giant planet orbiting at similar or equal to 9 au, as well as an inner planet orbiting at similar or equal to 2.7 au, which was recently detected through radial velocity (RV). As such, it offers several unique opportunities for detailed studies of planetary system formation and early evolution.Aims. We aim to further constrain the orbital and physical properties of beta Pictoris b and c using a combination of high contrast imaging, long base-line interferometry, and RV data. We also predict the closest approaches or the transit times of both planets, and we constrain the presence of additional planets in the system.Methods. We obtained six additional epochs of SPHERE data, six additional epochs of GRAVITY data, and five additional epochs of RV data. We combined these various types of data in a single Markov-chain Monte Carlo analysis to constrain the orbital parameters and masses of the two planets simultaneously. The analysis takes into account the gravitational influence of both planets on the star and hence their relative astrometry. Secondly, we used the RV and high contrast imaging data to derive the probabilities of presence of additional planets throughout the disk, and we tested the impact of absolute astrometry.Results. The orbital properties of both planets are constrained with a semi-major axis of 9.8 0.4 au and 2.7 +/- 0.02 au for b and c, respectively, and eccentricities of 0.09 +/- 0.1 and 0.27 +/- 0.07, assuming the HIPPARCOS distance. We note that despite these low fitting error bars, the eccentricity of beta Pictoris c might still be over-estimated. If no prior is provided on the mass of beta Pictoris b, we obtain a very low value that is inconsistent with what is derived from brightness-mass models. When we set an evolutionary model motivated prior to the mass of beta Pictoris b, we find a solution in the 10-11 M-Jup range. Conversely, beta Pictoris c's mass is well constrained, at 7.8 +/- 0.4 M-Jup, assuming both planets are on coplanar orbits. These values depend on the assumptions on the distance of the beta Pictoris system. The absolute astrometry HIPPARCOS-Gaia data are consistent with the solutions presented here at the 2 sigma level, but these solutions are fully driven by the relative astrometry plus RV data. Finally, we derive unprecedented limits on the presence of additional planets in the disk. We can now exclude the presence of planets that are more massive than about 2.5 M-Jup closer than 3 au, and more massive than 3.5 M-Jup between 3 and 7.5 au. Beyond 7.5 au, we exclude the presence of planets that are more massive than 1-2 M-Jup.Conclusions. Combining relative astrometry and RVs allows one to precisely constrain the orbital parameters of both planets and to give lower limits to potential additional planets throughout the disk. The mass of beta Pictoris c is also well constrained, while additional RV data with appropriate observing strategies are required to properly constrain the mass of beta Pictoris b.
|
|
| 5. |
- Desgrange, C., et al.
(författare)
-
In-depth direct imaging and spectroscopic characterization of the young Solar System analog HD 95086
- 2022
-
Ingår i: Astronomy and Astrophysics. - : EDP Sciences. - 0004-6361 .- 1432-0746. ; 664
-
Tidskriftsartikel (refereegranskat)abstract
- Context. HD 95086 is a young nearby Solar System analog hosting a giant exoplanet orbiting at 57 au from the star between an inner and outer debris belt. The existence of additional planets has been suggested as the mechanism that maintains the broad cavity between the two belts.Aims. We present a dedicated monitoring of HD 95086 with the VLT/SPHERE instrument to refine the orbital and atmospheric properties of HD 95086 b, and to search for additional planets in this system.Methods. SPHERE observations, spread over ten epochs from 2015 to 2019 and including five new datasets, were used. Combined with archival observations, from VLT/NaCo (2012-2013) and Gemini/GPI (2013-2016), the extended set of astrometric measurements allowed us to refine the orbital properties of HD 95086 b. We also investigated the spectral properties and the presence of a circumplanetary disk around HD 95086 b by using the special fitting tool exploring the diversity of several atmospheric models. In addition, we improved our detection limits in order to search for a putative planet c via the K-Stacker algorithm.Results. We extracted for the first time the JH low-resolution spectrum of HD 95086 b by stacking the six best epochs, and confirm its very red spectral energy distribution. Combined with additional datasets from GPI and NaCo, our analysis indicates that this very red color can be explained by the presence of a circumplanetary disk around planet b, with a range of high-temperature solutions (1400–1600 K) and significant extinction (Av ≳ 10 mag), or by a super-solar metallicity atmosphere with lower temperatures (800–300 K), and small to medium amount of extinction (Av ≲ 10 mag). We do not find any robust candidates for planet c, but give updated constraints on its potential mass and location.
|
|
| 6. |
- Lancaster, D. G., et al.
(författare)
-
An ultra-stable 2.9 mu m guided-wave chip laser and application to nano-spectroscopy
- 2019
-
Ingår i: APL Photonics. - : AIP Publishing. - 2378-0967. ; 4:11
-
Tidskriftsartikel (refereegranskat)abstract
- We present a configurable guided-wave planar glass-chip laser that produces low-noise and high-quality continuous-wave laser emission tunable from 2.82 to 2.95 mu m. The laser has a low threshold and intrinsic power and mode stability attributable to the high overlap of gain volume and pump mode defined by an ultrafast laser inscribed waveguide. The laser emission is single transverse-mode with a Gaussian spatial profile and M-x,y(2) similar to 1.05, 1.10. The power drift is similar to 0.08% rms over similar to 2 h. When configured in a spectrally free-running cavity, the guided-wave laser emits up to 170 mW. The benefit of low-noise and stable wavelength emission of this hydroxide resonant laser is demonstrated by acquiring high signal-to-noise images and spectroscopy of a corroded copper surface film with corrosion products containing water and hydroxide ions with a scattering-scanning near-field optical microscope.
|
|
| 7. |
|
|
| 8. |
|
|
| 9. |
- Skarpengland, T, et al.
(författare)
-
Neil3-dependent base excision repair regulates lipid metabolism and prevents atherosclerosis in Apoe-deficient mice
- 2016
-
Ingår i: Scientific reports. - : Springer Science and Business Media LLC. - 2045-2322. ; 6, s. 28337-
-
Tidskriftsartikel (refereegranskat)abstract
- Increasing evidence suggests that oxidative DNA damage accumulates in atherosclerosis. Recently, we showed that a genetic variant in the human DNA repair enzyme NEIL3 was associated with increased risk of myocardial infarction. Here, we explored the role of Neil3/NEIL3 in atherogenesis by both clinical and experimental approaches. Human carotid plaques revealed increased NEIL3 mRNA expression which significantly correlated with mRNA levels of the macrophage marker CD68. Apoe−/−Neil3−/− mice on high-fat diet showed accelerated plaque formation as compared to Apoe−/− mice, reflecting an atherogenic lipid profile, increased hepatic triglyceride levels and attenuated macrophage cholesterol efflux capacity. Apoe−/−Neil3−/− mice showed marked alterations in several pathways affecting hepatic lipid metabolism, but no genotypic alterations in genome integrity or genome-wide accumulation of oxidative DNA damage. These results suggest a novel role for the DNA glycosylase Neil3 in atherogenesis in balancing lipid metabolism and macrophage function, potentially independently of genome-wide canonical base excision repair of oxidative DNA damage.
|
|
| 10. |
- Balázs, C., et al.
(författare)
-
A comparison of optimisation algorithms for high-dimensional particle and astrophysics applications
- 2021
-
Ingår i: Journal of High Energy Physics (JHEP). - : Springer Nature. - 1126-6708 .- 1029-8479. ; 2021:5
-
Tidskriftsartikel (refereegranskat)abstract
- Optimisation problems are ubiquitous in particle and astrophysics, and involve locating the optimum of a complicated function of many parameters that may be computationally expensive to evaluate. We describe a number of global optimisation algorithms that are not yet widely used in particle astrophysics, benchmark them against random sampling and existing techniques, and perform a detailed comparison of their performance on a range of test functions. These include four analytic test functions of varying dimensionality, and a realistic example derived from a recent global fit of weak-scale supersymmetry. Although the best algorithm to use depends on the function being investigated, we are able to present general conclusions about the relative merits of random sampling, Differential Evolution, Particle Swarm Optimisation, the Covariance Matrix Adaptation Evolution Strategy, Bayesian Optimisation, Grey Wolf Optimisation, and the PyGMO Artificial Bee Colony, Gaussian Particle Filter and Adaptive Memory Programming for Global Optimisation algorithms.
|
|
| 11. |
- den Bakker, C. M., et al.
(författare)
-
Prognostic factors for return to work and work disability among colorectal cancer survivors; A systematic review
- 2018
-
Ingår i: PLoS ONE. - : Public Library of Science (PLoS). - 1932-6203. ; 13:8
-
Tidskriftsartikel (refereegranskat)abstract
- Background Colorectal cancer is diagnosed progressively in employed patients due to screening programs and increasing retirement age. The objective of this study was to identify prognostic factors for return to work and work disability in patients with colorectal cancer. The research protocol was published at PROSPERO with registration number CRD42017049757. A systematic review of cohort and case-control studies in colorectal cancer patients above 18 years, who were employed when diagnosed, and who had a surgical resection with curative intent were included. The primary outcome was return to work or work disability. Potentially prognostic factors were included in the analysis if they were measured in at least three studies. Risk of bias was assessed according to the QUality In Prognosis Studies tool. A qualitative synthesis analysis was performed due to heterogeneity between studies. Quality of evidence was evaluated according to Grading of Recommendation Assessment, Development and Evaluation. Eight studies were included with a follow-up period of 26 up to 520 weeks. (Neo) adjuvant therapy, higher age, and more comorbidities had a significant negative influence on return to work. A previous period of unemployment, extensive surgical resection and postoperative complications significantly increased the risk of work disability. The quality of evidence for these prognostic factors was considered very low to moderate. Health care professionals need to be aware of these prognostic factors to select patients eligible for timely intensified rehabilitation in order to optimize the return to work process and prevent work disability.
|
|
| 12. |
- Deschasaux, Melanie, et al.
(författare)
-
Association between nutritional profiles of foods underlying Nutri-Score front-of-pack labels and mortality : EPIC cohort study in 10 European countries
- 2020
-
Ingår i: The BMJ. - : BMJ Publishing Group Ltd. - 1756-1833. ; 370
-
Tidskriftsartikel (refereegranskat)abstract
- OBJECTIVE To determine if the Food Standards Agency nutrient profiling system (FSAm-NPS), which grades the nutritional quality of food products and is used to derive the Nutri-Score front-of-packet label to guide consumers towards healthier food choices, is associated with mortality. DESIGN Population based cohort study. SETTING European Prospective Investigation into Cancer and Nutrition (EPIC) cohort from 23 centres in 10 European countries. PARTICIPANTS 521 324 adults; at recruitment, country specific and validated dietary questionnaires were used to assess their usual dietary intakes. A FSAm-NPS score was calculated for each food item per 100 g content of energy, sugars, saturated fatty acids, sodium, fibre, and protein, and of fruit, vegetables, legumes, and nuts. The FSAm-NPS dietary index was calculated for each participant as an energy weighted mean of the FSAm-NPS score of all foods consumed. The higher the score the lower the overall nutritional quality of the diet. MAIN OUTCOME MEASURE Associations between the FSAm-NPS dietary index score and mortality, assessed using multivariable adjusted Cox proportional hazards regression models. RESULTS After exclusions, 501 594 adults (median follow-up 17.2 years, 8 162 730 person years) were included in the analyses. Those with a higher FSAm-NPS dietary index score (highest versus lowest fifth) showed an increased risk of all cause mortality (n=53 112 events from non-external causes; hazard ratio 1.07, 95% confidence interval 1.03 to 1.10, P(0.001 for trend) and mortality from cancer (1.08, 1.03 to 1.13, P(0.001 for trend) and diseases of the circulatory (1.04, 0.98 to 1.11, P=0.06 for trend), respiratory (1.39, 1.22 to 1.59, P(0.001), and digestive (1.22, 1.02 to 1.45, P=0.03 for trend) systems. The age standardised absolute rates for all cause mortality per 10 000 persons over 10 years were 760 (men=1237; women=563) for those in the highest fifth of the FSAm-NPS dietary index score and 661 (men=1008; women=518) for those in the lowest fifth. CONCLUSIONS In this large multinational European cohort, consuming foods with a higher FSAm-NPS score (lower nutritional quality) was associated with a higher mortality for all causes and for cancer and diseases of the circulatory, respiratory, and digestive systems, supporting the relevance of FSAm-NPS to characterise healthier food choices in the context of public health policies (eg, the Nutri-Score) for European populations. This is important considering ongoing discussions about the potential implementation of a unique nutrition labelling system at the European Union level.
|
|
| 13. |
|
|
| 14. |
|
|
| 15. |
- Kish, L.B., Otten, F., Vandamme, L.K.J., Vajtai, R., Granqvist, C.G., Marlow, B., Kruis, E., Fissan, H., Ederth, J., Chaoguang, P.
(författare)
-
Noise Measurements and Fluctuation Analysis in Nanoparticle Films
- 2001
-
Ingår i: Advanced Research Workshop on Semiconductor Nanostructures, 2001, New Zealand. Paper presented by L.B. Kish, as an invited talk, at the Advanced Research Workshop on Semiconductor Nanostructures, 5-9 February, 2001, Qeenstown, New Zealand..
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)
|
|
| 16. |
|
|
| 17. |
|
|
| 18. |
- Otten, Volker, et al.
(författare)
-
Are CT Scans a Satisfactory Substitute for the Follow-Up of RSA Migration Studies of Uncemented Cups? : A Comparison of RSA Double Examinations and CT Datasets of 46 Total Hip Arthroplasties
- 2017
-
Ingår i: BioMed Research International. - : Hindawi Publishing Corporation. - 2314-6133 .- 2314-6141. ; 2017
-
Tidskriftsartikel (refereegranskat)abstract
- As part of the 14-year follow-up of a prospectively randomized radiostereometry (RSA) study on uncemented cup fixation, two pairs of stereo radiographs and a CT scan of 46 hips were compared. Tantalum beads, inserted during the primary operation, were detected in the CT volume and the stereo radiographs and used to produce datasets of 3D coordinates. The limit of agreement between the combined CT and RSA datasets was calculated in the same way as the precision of the double RSA examination. The precision of RSA corresponding to the 99% confidence interval was 1.36 degrees, 1.36 degrees, and 0.60 degrees for X-, Y-, and Z-rotation and 0.40, 0.17, and 0.37mm for X-, Y-, and Z-translation. The limit of agreement between CT and RSA was 1.51 degrees, 2.17 degrees, and 1.05 degrees for rotation and 0.59, 0.56, and 0.74mm for translation. The differences between CT and RSA are close to the described normal 99% confidence interval for precision in RSA: 0.3 degrees to 2 degrees for rotation and 0.15 to 0.6mm for translation. We conclude that measurements using CT and RSA are comparable and that CT can be used for migration studies for longitudinal evaluations of patients with RSA markers.
|
|
| 19. |
|
|
| 20. |
- Otten, Volker, 1973-, et al.
(författare)
-
Evaluation of a new cemented highly cross-linked all-polyethylene cup : a prospective and randomised study assessing wear and fixation characteristics using radiostereometric analysis
- 2022
-
Ingår i: HIP International. - : Sage Publications. - 1120-7000 .- 1724-6067. ; 32:6, s. 779-786
-
Tidskriftsartikel (refereegranskat)abstract
- BACKGROUND AND PURPOSE: The aim of this prospective, randomised and controlled study was to evaluate the wear and fixation properties of a new cemented highly cross-linked all-polyethylene (HXLPE) cup in comparison with a conventional cemented ultra-high molecular weight polyethylene (ConvPE) cup using radiostereometric analysis (RSA).PATIENTS AND METHODS: A total of 58 patients (58 hips) with primary osteoarthritis (OA) were enrolled in a randomised controlled trial to receive either a ConvPE cup (control) or HXLPE cup (intervention) with identical geometry. The subjects were randomised in a 1:1 ratio. The primary endpoint was proximal wear measured as femoral head penetration into the cup, secondary outcomes were 3D-wear and annual proximal wear from 1 to 5 years. Cup fixation was measured as movement of the cup in relation to the acetabular bone with proximal migration being the primary outcome measure, 3D-migration and change in inclination as secondary outcomes. The patients were followed for 5 years with RSA performed postoperatively, at 3, 12, 24, and 60 months.RESULTS: The HXLPE displayed a lower median proximal femoral head penetration compared to ConvPE, with a median difference at 2 years of -0.07 mm (95% CI, -0.10 to -0.04 mm), and -0.19 mm (95% CI, -0.27 to -0.15 mm) at 5 years. Annual proximal wear between 1 and 5 years was 0.03 mm/year for HXLPE and 0.06 mm/year for ConvPE (mean difference 0.05 mm, [95% CI, 0.03-0.07 mm]). Proximal migration, 3D migration and change in inclination was numerically slightly higher for HXLPE, albeit not statistically significant.CONCLUSIONS: Compared to ConvPE, the HXLPE cup displayed significantly lower polyethylene wear. Cup migration was not statistically significant different.CLINICALTRIALS.GOV IDENTIFIER: NCT04322799.
|
|
| 21. |
- Otten, Volker T C, et al.
(författare)
-
Osteolysis around uncemented cups withand without screw holes : Analysis of osteolytic lesions on CT images in 48 hips at a 14-year follow-up
-
Annan publikation (övrigt vetenskapligt/konstnärligt)abstract
- Osteolysis around uncemented cups is a major complication for THA. We present a 14-year follow-up of 48 hips previously randomized to four groups of cup fixation – sealed cups with press-fit only, cups with hydroxyapatite coating, cups with screws, and cups with pegs. CT scans revealed three types of osteolytic lesions – Type 1A (absence of trabecular bone and a sclerotic border), Type 1B (absence of trabecular bone without a sclerotic border), and Type 2 (reductions in radiodensity and trabeculae). Cups with screw-holes were surrounded with larger osteolytic lesions that were predominantly Type 1A. Unsealed screw holes in uncemented cups appeared to be a risk factor for osteolysis development. Modern CT scans reveal three types of osteolytic lesions. Distinction between types is important for comparability between studies.
|
|
| 22. |
- Otten, Volker T C, et al.
(författare)
-
Stability of Uncemented Cups - Long-Term Effect of Screws, Pegs and HA Coating : A 14-Year RSA Follow-Up of Total Hip Arthroplasty
- 2016
-
Ingår i: The Journal of Arthroplasty. - : Elsevier BV. - 0883-5403 .- 1532-8406. ; 31:1, s. 156-161
-
Tidskriftsartikel (refereegranskat)abstract
- Screws, pegs and hydroxyapatite-coating are used to enhance the primary stability of uncemented cups. We present a 14-year follow-up of 48 hips randomized to four groups: press-fit only, press-fit plus screws, press-fit plus pegs and hydroxyapatite-coated cups. Radiostereometric migration measurements showed equally good stability regardless cup augmentation. The mean wear rate was high, 0.21mm/year, with no differences between the groups. Seven hips had radiographical osteolysis but only in hips with augmented cups. Cups without screw-holes compared with cups with screw-holes resulted in better clinical outcome at the 14-year follow-up. Thus, augmentation of uncemented cups with screws, pegs, or hydroxyapatite did not appear to improve the long-term stability compared with press-fit only.
|
|
| 23. |
- Otten, Volker T C, 1973-
(författare)
-
The Uncemented Cup in Total Hip Arthroplasty : stability, Wear and Osteolysis
- 2019
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Background: Artificial hip joint replacement has undergone tremendous development in the past 100 years. In the beginning, complications, such as infection and early loosening, were the rule rather than the exception. Today, complications of any sort are rare during the first decade after the operation. Artificial hip joint replacement has been chosen as the "Operation of the Century" and has dramatically improved the quality of life of millions of patients. Unfortunately, in the long-term, prosthesis loosening due to pathological bone resorption (osteolysis) around the prosthesis is still common. Traditionally, the prosthesis is anchored in the bone with bone cement (Plexiglas). However, since this cementation method was suspected to cause late loosening, alternative methods, such as the implantation of so-called uncemented prostheses, have been developed and are being increasingly applied. Because the early movement of a prosthesis (migration) increases the risk of loosening, uncemented cups are often augmented with additional screws. The mechanisms regulating the early and late loosening of uncemented cups are not fully established. Wear particles from the artificial joint and intermittent fluid pressure on the bone appear to accelerate or even cause bone loss and can eventually lead to loosening of the prosthesis. Therefore, screw holes in the uncemented cup have been suspected to be a risk factor.Aims: We have studied whether the additional augmentation of modern uncemented cups with screws, pegs or hydroxyapatite increases the long-term stability, affects the wear rate, influences the development of osteolysis, or has any impact on the risk of cup revision. Furthermore, we investigated whether computed tomography (CT), which is needed to detect osteolysis around the prosthesis, could also be used in the follow-up of migration studies without losing significant precision compared to radiostereometry (RSA), which is the gold standard for these measurements.Patients and Methods: In studies I-III, we evaluated 48 hips (45 patients) randomized to receive cups with or without augmentation. As part of the 14-year follow-up with conventional radiographs of the pelvis, two pairs of stereo radiographs and a CT scan were obtained. Migration and wear were measured by RSA. The volume and type of osteolysis were determined on CT. Furthermore, we calculated the precision and limit of agreement of RSA and CT to compare these two modalities as tools for migration measurements.In study IV, we compared the risk of cup revision between 10,371 uncemented cups with and 12,354 without screw holes, using data from the Swedish Hip Arthroplasty Register.Results: Study I: Cup stability was equally good regardless of cup augmentation. The mean wear rate of the cup liner was high, at 0.21 mm/year, with no significant difference between the groups.Study II: The limit of agreement between CT and RSA was 1.15°, 1.51°, and 0.70° for rotation and 0.46, 0.43, and 0.52 mm for translation. These results were within the described normal 99% confidence limits for precision in RSA: 0.3° to 2° for rotation and 0.15 to 0.6 mm for translation.Study III: Osteolysis of some degree was visible in all 48 hips on CT. We found three different types of osteolytic lesions: type 1A, absent trabecular bone and a sclerotic border around the lesion; type 1B, absent trabecular bone and no sclerotic border; and type 2, reduced radiodensity and reduced trabecular number. Cups with screw holes were surrounded with larger osteolytic lesions, and osteolysis around these cups was more likely to be a type 1A lesion.Study IV: Cups without screw holes showed a decreased risk of cup revision (implant exchange or removal) due to any reason at both 2 years (adjusted hazard ratio, HR: 0.6, confidence interval, CI: 0.5-0.8) and 10 years (HR: 0.7, CI: 0.5- 0.9). However, for aseptic loosening, there was no significant difference between cups with and without screw holes, with an implant survival rate of 99.9% (CI: 99.8-99.9) at 2 years and 99.1% (CI: 98.6-99.7) at 10 years.Conclusion: Uncemented cups augmented with screws, pegs, or hydroxyapatite do not have improved long-term stability compared with cups with press-fit only. Unsealed screw holes in uncemented cups appear to be a risk factor for the development of larger osteolytic lesions. CT showed three different types of osteolytic lesions. The risk of aseptic loosening for modern uncemented cup designs is very low, and cups without additional augmentation do not have an increased revision rate. In contrast, the risk of cup revision for any reason was higher for cups with screw holes. CT can be used for migration studies for the longitudinal evaluation of patients with tantalum markers with precision comparable to that of RSA.
|
|
| 24. |
- Otten, Volker T C, et al.
(författare)
-
Uncemented cups with and without screw holes in primary THA : a Swedish Hip Arthroplasty Register study with 22725 hips
-
Annan publikation (övrigt vetenskapligt/konstnärligt)abstract
- Background and purpose: Uncemented cups in total hip arthroplasty (THA) are often augmented with additional screws to enhance their primary stability. We investigated whether there is a difference in the risk for revision between cups with screw holes and cups without screw holes.Patients and methods: We analyzed the risk for cup revision of uncemented cups registered in the Swedish Hip Arthroplasty Register (SHAR) between 2000 and 2017 with respect to the presence of screw holes. Only patients with primary osteoarthritis (OA) were included. 22725 cups, including 12354 without screw holes and 10371 with screw holes, were evaluated. Revision rates at 2 and 10 years after the primary operation were analyzed.Results: At a median follow-up time of 3.4 (0-18) years, 459 cup revisions were reported. The main reasons for cup revision during the whole observations time were infection, 52% of all cup revisions, and dislocation, 26% of all cup revisions. The survival rate with cup revision due to aseptic loosening as endpoint was 99.9% (95% CI 99.8-99.9) at 2 years for both cups with and cups without screw holes, and the survival rates at 10 years were 99.5% (CI 99.3-99.7) and 99.1% (CI 98.6-99.5), respectively. Cups without screw holes showed a decreased risk of revision due to any reason at both 2 years (adjusted hazard ratio [HR] 0.6, CI 0.5-0.8) and 10 years (HR 0.7, CI 0.5-0.9).Interpretation: We found a very low revision rate for aseptic loosening with modern, uncemented cup designs. Cups with screw holes had an increased risk for revision due to any reason in patients with primary OA.
|
|
| 25. |
- Otten, Volker T C, 1973-, et al.
(författare)
-
Uncemented cups with and without screw holes in primary THA: a Swedish Hip Arthroplasty Register study with 22,725 hips
- 2019
-
Ingår i: Acta Orthopaedica. - : Medical Journals Sweden AB. - 1745-3674 .- 1745-3682. ; 90:3, s. 258-263
-
Tidskriftsartikel (refereegranskat)abstract
- Background and purpose — Uncemented cups in total hip arthroplasty (THA) are often augmented with additional screws to enhance their primary stability. We investigated whether there is a difference in the risk for revision between cups with screw holes and cups without screw holes. Patients and methods — We analyzed the risk for cup revision of uncemented cups registered in the Swedish Hip Arthroplasty Register (SHAR) between 2000 and 2017 with respe ct to the presence of screw holes. Only patients with primary osteoarthritis (OA) were included. 22,725 cups, including 12,354 without screw holes and 10,371 with screw holes, were evaluated. Revision rates at 2 and 10 years after the primary operation were analyzed. Results — At a median follow-up time of 3.4 years (0–18), 459 cup revisions were reported. The main reasons for cup revision during the whole observation time were infection, 52% of all cup revisions, and dislocation, 26% of all cup revisions. The survival rate with cup revision due to aseptic loosening as endpoint was 99.9% (95% CI 99.8–99.9) at 2 years for both cups with and cups without screw holes, and the survival rates at 10 years were 99.5% (CI 99.3–99.7) and 99.1% (CI 98.6–99.5), respectively. Cups without screw holes showed a decreased risk of revision due to any reason at both 2 years (adjusted hazard ratio [HR] 0.6, CI 0.5–0.8) and 10 years (HR 0.7, CI 0.5–0.9). Interpretation — We found a very low revision rate for aseptic loosening with modern, uncemented cup designs. Cups with screw holes had an increased risk of revision due to any reason in patients with primary OA. © 2019, © 2019 The Author(s). Published by Taylor & Francis on behalf of the Nordic Orthopedic Federation.
|
|
| 26. |
|
|
| 27. |
- Tong, Tammy Y.N., et al.
(författare)
-
The associations of major foods and fibre with risks of ischaemic and haemorrhagic stroke : A prospective study of 418 329 participants in the EPIC cohort across nine European countries
- 2020
-
Ingår i: European Heart Journal. - : Oxford University Press (OUP). - 0195-668X .- 1522-9645. ; 41:28, s. 2632-2640
-
Tidskriftsartikel (refereegranskat)abstract
- Aim: To investigate the associations between major foods and dietary fibre with subtypes of stroke in a large prospective cohort. Methods and results: We analysed data on 418 329 men and women from nine European countries, with an average of 12.7 years of follow-up. Diet was assessed using validated country-specific questionnaires which asked about habitual intake over the past year, calibrated using 24-h recalls. Multivariable-adjusted Cox regressions were used to estimate hazard ratios (HRs) for ischaemic and haemorrhagic stroke associated with consumption of red and processed meat, poultry, fish, dairy foods, eggs, cereals, fruit and vegetables, legumes, nuts and seeds, and dietary fibre. For ischaemic stroke (4281 cases), lower risks were observed with higher consumption of fruit and vegetables combined (HR; 95% CI per 200 g/day higher intake, 0.87; 0.82-0.93, P-trend < 0.001), dietary fibre (per 10 g/day, 0.77; 0.69-0.86, P-trend < 0.001), milk (per 200 g/day, 0.95; 0.91-0.99, P-trend = 0.02), yogurt (per 100 g/day, 0.91; 0.85-0.97, P-trend = 0.004), and cheese (per 30 g/day, 0.88; 0.81-0.97, P-trend = 0.008), while higher risk was observed with higher red meat consumption which attenuated when adjusted for the other statistically significant foods (per 50 g/day, 1.07; 0.96-1.20, P-trend = 0.20). For haemorrhagic stroke (1430 cases), higher risk was associated with higher egg consumption (per 20 g/day, 1.25; 1.09-1.43, P-trend = 0.002). Conclusion: Risk of ischaemic stroke was inversely associated with consumption of fruit and vegetables, dietary fibre, and dairy foods, while risk of haemorrhagic stroke was positively associated with egg consumption. The apparent differences in the associations highlight the importance of examining ischaemic and haemorrhagic stroke subtypes separately.
|
|
| 28. |
|
|
| 29. |
|
|
| 30. |
- Wojtowicz, Radoslaw, et al.
(författare)
-
Uncemented trabecular metal high-flex posterior-stabilized monoblock total knee arthroplasty in patients aged 60 years or younger
- 2024
-
Ingår i: Knee (Oxford). - : Elsevier. - 0968-0160 .- 1873-5800. ; 46, s. 99-107
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Uncemented trabecular metal (TM) monoblock tibial components in total knee arthroplasty (TKA) have shown excellent clinical results for up to 10 years. However, these studies were performed in highly specialized units, with few surgeons and often excluding knees with secondary osteoarthritis (OA), severe malalignments and previous surgery. The purpose of this study was to investigate implant survivorship and clinical and radiological outcome of the uncemented TM high-flex posterior stabilized (PS) monoblock tibial component in routine clinical practice.Methods: A retrospective study of 339 knees (282 patients) operated with the implant in routine clinical practice at two hospitals on patients aged 60 years or younger between 2007 and 2015. The operations were performed by 12 surgeons and there were no specific contraindications for use of the implant. Follow up ended in 2020. The status of the implant of deceased patients at death and those not attending follow up was checked with the Swedish Knee Arthroplasty Register. Clinical follow up consisted of clinical investigation, PROMs, and knee X-ray.Results: Follow up was mean (range) 8.5 (5–13.8) years, and the 8-year survival rate was 0.98 (standard error 0.007). Five patients five knees) were deceased, five knees were revised (none due to aseptic loosening), and 16 patients did not attend the clinical follow up. Forty-four percent of the knees had secondary OA and 45% had had previous operations. 93% were satisfied or very satisfied with the operation and forgotten joint score (FJS) was median (interquartile range) 81 (44–94). Radiographic analysis revealed bone in close contact with the tibial tray and pegs in most cases, and in only 2% of the knees were potential radiolucent lines found.Conclusion: The results indicate that this uncemented implant performs excellently in routine clinical practice and also in younger patients with secondary OA or previous knee operations.
|
|
