1. |
- Karlsson, Lennart, et al.
(författare)
-
Mechanics of materials and structures: a simulation-driven design approach
- 2011
-
Ingår i: Journal of Mechanics of Materials and Structures. - Berkeley, USA : Mathematical Sciences Publishers. - 1559-3959 .- 2157-5428. ; 6:1-4, s. 277-301
-
Tidskriftsartikel (refereegranskat)abstract
- Engineering product development has developed considerably over the past decade. In order for industry to keep up with continuously changing requirements, it is necessary to develop new and innovative simulation methods. However, few tools and methods for simulation-driven design have been applied in industrial settings and proven to actually drive the development and selection of the ideal solution. Such tools, based on fundamental equations, are the focus of this paper. In this paper the work is based on two cases of mechanics of materials and structures: welding and rotor dynamical simulations. These two examples of simulation-driven design indicate that a larger design space can be explored and that more possible solutions can be evaluated. Therefore, the approach improves the probability of innovations and finding optimal solutions. A calibrated block dumping approach can be used to increase the efficiency of welding simulations when many simulations are required.
|
|
2. |
- Pahkamaa, Andreas, et al.
(författare)
-
A method to improve efficiency in welding simulations for simulaton driven design
- 2010
-
Ingår i: Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference - 2010. - New York : American Society of Mechanical Engineers. ; , s. 1-10
-
Konferensbidrag (refereegranskat)abstract
- Welding is one of the most commonly used methods of joining metal pieces. In product development it is often desirable to predict residual stresses and distortions to verify that e.g., alignment tolerances, strength demands, fatigue requirements, stress corrosion cracking, etc. are fulfilled. The objective of this paper is to derive a strategy to improve the efficiency of welding simulations aiming at a (future) simulation-driven design methodology. In this paper, a weld bead deposition technique called block dumping has been applied to improve the efficiency. The proposed strategy is divided into seven steps, where the first four steps are verified by two welding simulation cases (a benchmark problem for a single weld bead-on-plate specimen and a T-welded structure). This study shows that by use of the block dumping technique, the computation time can be reduced by as much as 93% compared to moving heat source, still with acceptable accuracy of the model.
|
|
3. |
- Pahkamaa, Andreas, et al.
(författare)
-
Combining variation simulation with welding simulation for prediction of deformation
- 2012
-
Ingår i: Proceedings of the ASME International Mechanical Engineering Congress and Exposition - 2010. - New York : American Society of Mechanical Engineers. - 9780791844489 ; , s. 81-88
-
Konferensbidrag (refereegranskat)abstract
- In most variation simulations, i.e. simulations of geometric variations in assemblies, the influence from the heating and cooling processes, generated when two parts are welded together, is not taken into consideration. In most welding simulations the influence from geometric tolerances on parts is not taken into consideration, i.e. the simulations are based on nominal parts. In this paper these two aspects, both crucial for predicting the final outcome of an assembly, are combined by linking two commercial software packages for variation simulation and for welding simulation together. Monte Carlo simulation is used to generate a number of different non-nominal parts in the variation simulation software. The translation and rotation matrices, representing the deviations from the nominal geometry due to positioning error, are exported to the welding simulation software, where the effects from welding are applied. Thereafter, the results from the welding simulation are exported back to the variation simulation software in order to compute and illustrate the deviations and variations of the final subassembly. The method is applied on a simple case, a T-weld joint, with available measurements of residual stresses and deformations. The effect of the different sources of deviation on the final outcome is analyzed and the difference between welding simulations applied to nominal parts and to disturbed parts is investigated.
|
|
4. |
- Pahkamaa, Andreas, et al.
(författare)
-
Combining Variation Simulation With Welding Simulation for Prediction of Deformation and Variation of a Final Assembly
- 2012
-
Ingår i: Journal of Computing and Information Science in Engineering. - : ASME International. - 1530-9827 .- 1944-7078. ; 12:2, s. 021002-021007
-
Tidskriftsartikel (refereegranskat)abstract
- In most variation simulations, i.e., simulations of geometric variations in assemblies, the influence from heating and cooling processes, generated when two parts are welded together, is not taken into consideration. In most welding simulations, the influence from geometric tolerances on parts is not taken into consideration, i.e., the simulations are based on nominal parts. In this paper, these two aspects, both crucial for predicting the final outcome of an assembly, are combined. Monte Carlo simulation is used to generate a number of different non-nominal parts in a software for variation simulation. The translation and rotation matrices, representing the deviations from the nominal geometry due to positioning error, are exported to a software for welding simulation, where the effects from welding are applied. The final results are then analyzed with respect to both deviation and variation. The method is applied on a simple case, a T-weld joint, with available measurements of residual stresses and deformations. The effect of the different sources of deviation on the final outcome is analyzed and the difference between welding simulations applied to nominal parts and to disturbed (non-nominal) parts is investigated. The study shows that, in order to achieve realistic results, variation simulations should be combined with welding simulations. It does also show that welding simulations should be applied to a set of non-nominal parts since the difference between deviation of a nominal part and deviation of a non-nominal part due to influence of welding can be quite large.
|
|