| 1. |
|
|
| 2. |
- Murray, Christopher J. L., et al.
(författare)
-
Population and fertility by age and sex for 195 countries and territories, 1950–2017: a systematic analysis for the Global Burden of Disease Study 2017
- 2018
-
Ingår i: The Lancet. - 1474-547X .- 0140-6736. ; 392:10159, s. 1995-2051
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Population estimates underpin demographic and epidemiological research and are used to track progress on numerous international indicators of health and development. To date, internationally available estimates of population and fertility, although useful, have not been produced with transparent and replicable methods and do not use standardised estimates of mortality. We present single-calendar year and single-year of age estimates of fertility and population by sex with standardised and replicable methods. Methods: We estimated population in 195 locations by single year of age and single calendar year from 1950 to 2017 with standardised and replicable methods. We based the estimates on the demographic balancing equation, with inputs of fertility, mortality, population, and migration data. Fertility data came from 7817 location-years of vital registration data, 429 surveys reporting complete birth histories, and 977 surveys and censuses reporting summary birth histories. We estimated age-specific fertility rates (ASFRs; the annual number of livebirths to women of a specified age group per 1000 women in that age group) by use of spatiotemporal Gaussian process regression and used the ASFRs to estimate total fertility rates (TFRs; the average number of children a woman would bear if she survived through the end of the reproductive age span [age 10–54 years] and experienced at each age a particular set of ASFRs observed in the year of interest). Because of sparse data, fertility at ages 10–14 years and 50–54 years was estimated from data on fertility in women aged 15–19 years and 45–49 years, through use of linear regression. Age-specific mortality data came from the Global Burden of Diseases, Injuries, and Risk Factors Study (GBD) 2017 estimates. Data on population came from 1257 censuses and 761 population registry location-years and were adjusted for underenumeration and age misreporting with standard demographic methods. Migration was estimated with the GBD Bayesian demographic balancing model, after incorporating information about refugee migration into the model prior. Final population estimates used the cohort-component method of population projection, with inputs of fertility, mortality, and migration data. Population uncertainty was estimated by use of out-of-sample predictive validity testing. With these data, we estimated the trends in population by age and sex and in fertility by age between 1950 and 2017 in 195 countries and territories. Findings: From 1950 to 2017, TFRs decreased by 49·4% (95% uncertainty interval [UI] 46·4–52·0). The TFR decreased from 4·7 livebirths (4·5–4·9) to 2·4 livebirths (2·2–2·5), and the ASFR of mothers aged 10–19 years decreased from 37 livebirths (34–40) to 22 livebirths (19–24) per 1000 women. Despite reductions in the TFR, the global population has been increasing by an average of 83·8 million people per year since 1985. The global population increased by 197·2% (193·3–200·8) since 1950, from 2·6 billion (2·5–2·6) to 7·6 billion (7·4–7·9) people in 2017; much of this increase was in the proportion of the global population in south Asia and sub-Saharan Africa. The global annual rate of population growth increased between 1950 and 1964, when it peaked at 2·0%; this rate then remained nearly constant until 1970 and then decreased to 1·1% in 2017. Population growth rates in the southeast Asia, east Asia, and Oceania GBD super-region decreased from 2·5% in 1963 to 0·7% in 2017, whereas in sub-Saharan Africa, population growth rates were almost at the highest reported levels ever in 2017, when they were at 2·7%. The global average age increased from 26·6 years in 1950 to 32·1 years in 2017, and the proportion of the population that is of working age (age 15–64 years) increased from 59·9% to 65·3%. At the national level, the TFR decreased in all countries and territories between 1950 and 2017; in 2017, TFRs ranged from a low of 1·0 livebirths (95% UI 0·9–1·2) in Cyprus to a high of 7·1 livebirths (6·8–7·4) in Niger. The TFR under age 25 years (TFU25; number of livebirths expected by age 25 years for a hypothetical woman who survived the age group and was exposed to current ASFRs) in 2017 ranged from 0·08 livebirths (0·07–0·09) in South Korea to 2·4 livebirths (2·2–2·6) in Niger, and the TFR over age 30 years (TFO30; number of livebirths expected for a hypothetical woman ageing from 30 to 54 years who survived the age group and was exposed to current ASFRs) ranged from a low of 0·3 livebirths (0·3–0·4) in Puerto Rico to a high of 3·1 livebirths (3·0–3·2) in Niger. TFO30 was higher than TFU25 in 145 countries and territories in 2017. 33 countries had a negative population growth rate from 2010 to 2017, most of which were located in central, eastern, and western Europe, whereas population growth rates of more than 2·0% were seen in 33 of 46 countries in sub-Saharan Africa. In 2017, less than 65% of the national population was of working age in 12 of 34 high-income countries, and less than 50% of the national population was of working age in Mali, Chad, and Niger. Interpretation: Population trends create demographic dividends and headwinds (ie, economic benefits and detriments) that affect national economies and determine national planning needs. Although TFRs are decreasing, the global population continues to grow as mortality declines, with diverse patterns at the national level and across age groups. To our knowledge, this is the first study to provide transparent and replicable estimates of population and fertility, which can be used to inform decision making and to monitor progress. Funding: Bill & Melinda Gates Foundation.
|
|
| 3. |
- Abbafati, Cristiana, et al.
(författare)
-
- 2020
-
Tidskriftsartikel (refereegranskat)
|
|
| 4. |
- Klionsky, Daniel J., et al.
(författare)
-
Guidelines for the use and interpretation of assays for monitoring autophagy
- 2012
-
Ingår i: Autophagy. - : Informa UK Limited. - 1554-8635 .- 1554-8627. ; 8:4, s. 445-544
-
Forskningsöversikt (refereegranskat)abstract
- In 2008 we published the first set of guidelines for standardizing research in autophagy. Since then, research on this topic has continued to accelerate, and many new scientists have entered the field. Our knowledge base and relevant new technologies have also been expanding. Accordingly, it is important to update these guidelines for monitoring autophagy in different organisms. Various reviews have described the range of assays that have been used for this purpose. Nevertheless, there continues to be confusion regarding acceptable methods to measure autophagy, especially in multicellular eukaryotes. A key point that needs to be emphasized is that there is a difference between measurements that monitor the numbers or volume of autophagic elements (e.g., autophagosomes or autolysosomes) at any stage of the autophagic process vs. those that measure flux through the autophagy pathway (i.e., the complete process); thus, a block in macroautophagy that results in autophagosome accumulation needs to be differentiated from stimuli that result in increased autophagic activity, defined as increased autophagy induction coupled with increased delivery to, and degradation within, lysosomes (in most higher eukaryotes and some protists such as Dictyostelium) or the vacuole (in plants and fungi). In other words, it is especially important that investigators new to the field understand that the appearance of more autophagosomes does not necessarily equate with more autophagy. In fact, in many cases, autophagosomes accumulate because of a block in trafficking to lysosomes without a concomitant change in autophagosome biogenesis, whereas an increase in autolysosomes may reflect a reduction in degradative activity. Here, we present a set of guidelines for the selection and interpretation of methods for use by investigators who aim to examine macroautophagy and related processes, as well as for reviewers who need to provide realistic and reasonable critiques of papers that are focused on these processes. These guidelines are not meant to be a formulaic set of rules, because the appropriate assays depend in part on the question being asked and the system being used. In addition, we emphasize that no individual assay is guaranteed to be the most appropriate one in every situation, and we strongly recommend the use of multiple assays to monitor autophagy. In these guidelines, we consider these various methods of assessing autophagy and what information can, or cannot, be obtained from them. Finally, by discussing the merits and limits of particular autophagy assays, we hope to encourage technical innovation in the field.
|
|
| 5. |
- Pal, Shashank, et al.
(författare)
-
Recent Advances in Catalytic Pyrolysis of Municipal Plastic Waste for the Production of Hydrocarbon Fuels
- 2022
-
Ingår i: Processes. - : MDPI. - 2227-9717. ; 10:8
-
Tidskriftsartikel (refereegranskat)abstract
- Currently, the resources of fossil fuels, such as crude oil, natural gas, and coal, are depleting day by day due to increasing energy demands. Nowadays, plastic items have witnessed a substantial surge in manufacturing due to their wide range of applications and low cost. Therefore, the amount of plastic waste is increasing rapidly. Hence, the proper management of plastic wastes for sustainable technologies is the need of the hour. Chemical recycling technologies based on pyrolysis are emerging as the best waste management approaches due to their robustness and better economics. However, research on converting plastic waste into fuels and other value-added goods has yet to be undertaken, and more R&D is required to make waste-plastic-based fuels economically viable. In this review article, the current status of the plastic waste pyrolysis process is discussed in detail. Processcontrolling parameters such as temperature, pressure, residence time, reactor type, and catalyst dose are also investigated in this review paper. In addition, the application of reaction products is also described in brief. For example, plasto-oil obtained by catalytic pyrolysis may be utilized in various sectors, e.g., transportation, industrial boilers, and power generation. On the other hand, byproducts, such as solid residue (plasto-char), could be used as a road construction material or to make activated carbon or graphenes, while the non-condensable gases have a good potential to be utilized as heating/energy source.
|
|
| 6. |
- Gurrani, Swapnil, et al.
(författare)
-
Biomass Hydrolyzing Enzymes
- 2024
-
Ingår i: <em>Biomass Hydrolyzing Enzymes: Basics, Advancements, and Applications</em>. - : CRC Press. ; , s. 3-13
-
Bokkapitel (övrigt vetenskapligt/konstnärligt)abstract
- Lignocellulosic biomass is the most abundant, ubiquitous polymer on Earth available to benefit mankind. Biomass biorefinery has taken center stage in the world’s economy and is becoming diverse with time. With biorefinery, cascades of products can be obtained from biomass rather than a single product. It is a complex structure that consists of three polymers as cellulose, hemicellulose and lignin, linked to each other in a compact intricate manner making it difficult to be attacked by microorganisms. Still, many microorganisms have evolved strategies to consume this abundant material as an energy source. Degradation of lignocellulosic biomass is not only a survival strategy for these microbes, but its destruction also plays a pivotal role in carbon recycling of Earth through the fixation of photosynthetically fixed carbon present in plant biomass. Mankind has explored the capacity of microorganisms to produce polymer-degrading enzymes to deconstruct its basic components. Biomass-degrading enzymes have attracted researchers worldwide as this is the most sustainable way to obtain fermentable sugars from this most abundant biomass. Synergism among enzymes as well as their various components are presented along with challenges of biomass hydrolysis and probable solutions. © 2024 selection and editorial matter, Reeta Rani Singhania, Anil Kumar Patel, Héctor A. Ruiz, Ashok Pandey; individual chapters, the contributors.
|
|
| 7. |
- Sushko, Iurii, et al.
(författare)
-
Applicability Domains for Classification Problems : Benchmarking of Distance to Models for Ames Mutagenicity Set.
- 2010
-
Ingår i: Journal of chemical information and modeling. - : American Chemical Society (ACS). - 1549-9596 .- 1549-960X. ; 50:12, s. 2094-2111
-
Tidskriftsartikel (refereegranskat)abstract
- The estimation of accuracy and applicability of QSAR and QSPR models for biological and physicochemical properties represents a critical problem. The developed parameter of "distance to model" (DM) is defined as a metric of similarity between the training and test set compounds that have been subjected to QSAR/QSPR modeling. In our previous work, we demonstrated the utility and optimal performance of DM metrics that have been based on the standard deviation within an ensemble of QSAR models. The current study applies such analysis to 30 QSAR models for the Ames mutagenicity data set that were previously reported within the 2009 QSAR challenge. We demonstrate that the DMs based on an ensemble (consensus) model provide systematically better performance than other DMs. The presented approach identifies 30-60% of compounds having an accuracy of prediction similar to the interlaboratory accuracy of the Ames test, which is estimated to be 90%. Thus, the in silico predictions can be used to halve the cost of experimental measurements by providing a similar prediction accuracy. The developed model has been made publicly available at http://ochem.eu/models/1 .
|
|
| 8. |
- Tetko, Igor V, et al.
(författare)
-
Critical assessment of QSAR models of environmental toxicity against Tetrahymena pyriformis : focusing on applicability domain and overfitting by variable selection.
- 2008
-
Ingår i: Journal of chemical information and modeling. - : American Chemical Society. - 1549-9596 .- 1549-960X. ; 48:9, s. 1733-46
-
Tidskriftsartikel (refereegranskat)abstract
- The estimation of the accuracy of predictions is a critical problem in QSAR modeling. The "distance to model" can be defined as a metric that defines the similarity between the training set molecules and the test set compound for the given property in the context of a specific model. It could be expressed in many different ways, e.g., using Tanimoto coefficient, leverage, correlation in space of models, etc. In this paper we have used mixtures of Gaussian distributions as well as statistical tests to evaluate six types of distances to models with respect to their ability to discriminate compounds with small and large prediction errors. The analysis was performed for twelve QSAR models of aqueous toxicity against T. pyriformis obtained with different machine-learning methods and various types of descriptors. The distances to model based on standard deviation of predicted toxicity calculated from the ensemble of models afforded the best results. This distance also successfully discriminated molecules with low and large prediction errors for a mechanism-based model developed using log P and the Maximum Acceptor Superdelocalizability descriptors. Thus, the distance to model metric could also be used to augment mechanistic QSAR models by estimating their prediction errors. Moreover, the accuracy of prediction is mainly determined by the training set data distribution in the chemistry and activity spaces but not by QSAR approaches used to develop the models. We have shown that incorrect validation of a model may result in the wrong estimation of its performance and suggested how this problem could be circumvented. The toxicity of 3182 and 48774 molecules from the EPA High Production Volume (HPV) Challenge Program and EINECS (European chemical Substances Information System), respectively, was predicted, and the accuracy of prediction was estimated. The developed models are available online at http://www.qspr.org site.
|
|
