| 1. |
- Beal, Jacob, et al.
(författare)
-
Robust estimation of bacterial cell count from optical density
- 2020
-
Ingår i: Communications Biology. - : Springer Science and Business Media LLC. - 2399-3642. ; 3:1
-
Tidskriftsartikel (refereegranskat)abstract
- Optical density (OD) is widely used to estimate the density of cells in liquid culture, but cannot be compared between instruments without a standardized calibration protocol and is challenging to relate to actual cell count. We address this with an interlaboratory study comparing three simple, low-cost, and highly accessible OD calibration protocols across 244 laboratories, applied to eight strains of constitutive GFP-expressing E. coli. Based on our results, we recommend calibrating OD to estimated cell count using serial dilution of silica microspheres, which produces highly precise calibration (95.5% of residuals <1.2-fold), is easily assessed for quality control, also assesses instrument effective linear range, and can be combined with fluorescence calibration to obtain units of Molecules of Equivalent Fluorescein (MEFL) per cell, allowing direct comparison and data fusion with flow cytometry measurements: in our study, fluorescence per cell measurements showed only a 1.07-fold mean difference between plate reader and flow cytometry data.
|
|
| 2. |
- Fenstermacher, M.E., et al.
(författare)
-
DIII-D research advancing the physics basis for optimizing the tokamak approach to fusion energy
- 2022
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 0029-5515 .- 1741-4326. ; 62:4
-
Tidskriftsartikel (refereegranskat)abstract
- DIII-D physics research addresses critical challenges for the operation of ITER and the next generation of fusion energy devices. This is done through a focus on innovations to provide solutions for high performance long pulse operation, coupled with fundamental plasma physics understanding and model validation, to drive scenario development by integrating high performance core and boundary plasmas. Substantial increases in off-axis current drive efficiency from an innovative top launch system for EC power, and in pressure broadening for Alfven eigenmode control from a co-/counter-I p steerable off-axis neutral beam, all improve the prospects for optimization of future long pulse/steady state high performance tokamak operation. Fundamental studies into the modes that drive the evolution of the pedestal pressure profile and electron vs ion heat flux validate predictive models of pedestal recovery after ELMs. Understanding the physics mechanisms of ELM control and density pumpout by 3D magnetic perturbation fields leads to confident predictions for ITER and future devices. Validated modeling of high-Z shattered pellet injection for disruption mitigation, runaway electron dissipation, and techniques for disruption prediction and avoidance including machine learning, give confidence in handling disruptivity for future devices. For the non-nuclear phase of ITER, two actuators are identified to lower the L-H threshold power in hydrogen plasmas. With this physics understanding and suite of capabilities, a high poloidal beta optimized-core scenario with an internal transport barrier that projects nearly to Q = 10 in ITER at ∼8 MA was coupled to a detached divertor, and a near super H-mode optimized-pedestal scenario with co-I p beam injection was coupled to a radiative divertor. The hybrid core scenario was achieved directly, without the need for anomalous current diffusion, using off-axis current drive actuators. Also, a controller to assess proximity to stability limits and regulate β N in the ITER baseline scenario, based on plasma response to probing 3D fields, was demonstrated. Finally, innovative tokamak operation using a negative triangularity shape showed many attractive features for future pilot plant operation.
|
|
| 3. |
|
|
| 4. |
- Lee, Hyun-Seob, et al.
(författare)
-
Foxa2 and Nurr1 Synergistically Yield A9 Nigral Dopamine Neurons Exhibiting Improved Differentiation, Function, and Cell Survival
- 2010
-
Ingår i: Stem Cells. - : Oxford University Press (OUP). - 1549-4918 .- 1066-5099. ; 28:3, s. 501-512
-
Tidskriftsartikel (refereegranskat)abstract
- Effective dopamine (DA) neuron differentiation from neural precursor cells (NPCs) is prerequisite for precursor/stem cell-based therapy of Parkinson's disease (PD). Nurr1, an orphan nuclear receptor, has been reported as a transcription factor that can drive DA neuron differentiation from non-dopaminergic NPCs in vitro. However, Nurr1 alone neither induces full neuronal maturation nor expression of proteins found specifically in midbrain DA neurons. In addition, Nurr1 expression is inefficient in inducing DA phenotype expression in NPCs derived from certain species such as mouse and human. We show here that Foxa2, a forkhead transcription factor whose role in midbrain DA neuron development was recently revealed, synergistically cooperates with Nurr1 to induce DA phenotype acquisition, midbrain-specific gene expression, and neuronal maturation. Thus, the combinatorial expression of Nurr1 and Foxa2 in NPCs efficiently yielded fully differentiated nigral (A9)-type midbrain neurons with clearly detectable DA neuronal activities. The effects of Foxa2 in DA neuron generation were observed regardless of the brain regions or species from which NPCs were derived. Furthermore, DA neurons generated by ectopic Foxa2 expression were more resistant to toxins. Importantly, Foxa2 expression resulted in a rapid cell cycle exit and reduced cell proliferation. Consistently, transplantation of NPCs transduced with Nurr1 and Foxa2 generated grafts enriched with midbrain-type DA neurons but reduced number of proliferating cells, and significantly reversed motor deficits in a rat PD model. Our findings can be applied to ongoing attempts to develop an efficient and safe precursor/stem cell-based therapy for PD. STEM CELLS 2010; 28: 501-512
|
|
| 5. |
- Park, So Yeon, et al.
(författare)
-
Sustainable lead management in halide perovskite solar cells
- 2020
-
Ingår i: Nature Sustainability. - : NATURE RESEARCH. - 2398-9629. ; 3:12
-
Tidskriftsartikel (refereegranskat)abstract
- The most-efficient solar cells use Pb-based halide perovskites; however, their toxicity poses environmental and health risks. Here, the authors report an adsorbent that allows for sustainable Pb management in these devices. Despite the rapid development of perovskite solar cells (PSCs) toward commercialization, the toxic lead (Pb) ions in PSCs pose a potential threat to the environment, health and safety. Managing Pb via recycling represents a promising approach to mitigating its toxicity. However, managing Pb from commonly used organic solvents has been challenging due to the lack of suitable Pb adsorbents. Here, we report a new adsorbent for both separation and recovery of Pb from PSC pollutants. The synthesized iron-incorporated hydroxyapatite possesses a strongly negatively charged surface that improves electrostatic interaction through surface-charge delocalization, thus leading to enhanced Pb adsorption. We demonstrate the feasibility of a complete Pb management process, including the purification of Pb-containing non-aqueous solvents below 15 parts per 10(9), a level compliant with the standards of the US Environmental Protection Agency, as well as recycling of 99.97% of Pb ions by forming lead iodide.
|
|
| 6. |
- Arzoumanian, Doris, et al.
(författare)
-
Dust polarized emission observations of NGC 6334: BISTRO reveals the details of the complex but organized magnetic field structure of the high-mass star-forming hub-filament network
- 2021
-
Ingår i: Astronomy and Astrophysics. - : EDP Sciences. - 0004-6361 .- 1432-0746. ; 647
-
Tidskriftsartikel (refereegranskat)abstract
- Context. Molecular filaments and hubs have received special attention recently thanks to new studies showing their key role in star formation. While the (column) density and velocity structures of both filaments and hubs have been carefully studied, their magnetic field (B-field) properties have yet to be characterized. Consequently, the role of B-fields in the formation and evolution of hub-filament systems is not well constrained. Aims. We aim to understand the role of the B-field and its interplay with turbulence and gravity in the dynamical evolution of the NGC 6334 filament network that harbours cluster-forming hubs and high-mass star formation. Methods. We present new observations of the dust polarized emission at 850 μm toward the 2 pc × 10 pc map of NGC 6334 at a spatial resolution of 0.09 pc obtained with the James Clerk Maxwell Telescope (JCMT) as part of the B-field In STar-forming Region Observations (BISTRO) survey. We study the distribution and dispersion of the polarized intensity (PI), the polarization fraction (PF), and the plane-of-The-sky B-field angle (χB_POS) toward the whole region, along the 10 pc-long ridge and along the sub-filaments connected to the ridge and the hubs. We derived the power spectra of the intensity and χBPOS along the ridge crest and compared them with the results obtained from simulated filaments. Results. The observations span 3 orders of magnitude in Stokes I and PI and 2 orders of magnitude in PF (from 0.2 to 20%). A large scatter in PI and PF is observed for a given value of I. Our analyses show a complex B-field structure when observed over the whole region ( 10 pc); however, at smaller scales (1 pc), χBPOS varies coherently along the crests of the filament network. The observed power spectrum of χBPOS can be well represented with a power law function with a slope of-1.33 ± 0.23, which is 20% shallower than that of I. We find that this result is compatible with the properties of simulated filaments and may indicate the physical processes at play in the formation and evolution of star-forming filaments. Along the sub-filaments, χBPOS rotates frombeing mostly perpendicular or randomly oriented with respect to the crests to mostly parallel as the sub-filaments merge with the ridge and hubs. This variation of the B-field structure along the sub-filaments may be tracing local velocity flows of infalling matter in the ridge and hubs. Our analysis also suggests a variation in the energy balance along the crests of these sub-filaments, from magnetically critical or supercritical at their far ends to magnetically subcritical near the ridge and hubs. We also detect an increase in PF toward the high-column density (NH2 â 1023 cm-2) star cluster-forming hubs. These latter large PF values may be explained by the increase in grain alignment efficiency due to stellar radiation from the newborn stars, combined with an ordered B-field structure. Conclusions. These observational results reveal for the first time the characteristics of the small-scale (down to 0.1 pc) B-field structure of a 10 pc-long hub-filament system. Our analyses show variations in the polarization properties along the sub-filaments that may be tracing the evolution of their physical properties during their interaction with the ridge and hubs. We also detect an impact of feedback from young high-mass stars on the local B-field structure and the polarization properties, which could put constraints on possible models for dust grain alignment and provide important hints as to the interplay between the star formation activity and interstellar B-fields.
|
|
| 7. |
- Ching, Tao-Chung, et al.
(författare)
-
The JCMT BISTRO-2 Survey: Magnetic Fields of the Massive DR21 Filament
- 2022
-
Ingår i: Astrophysical Journal. - : American Astronomical Society. - 1538-4357 .- 0004-637X. ; 941:2
-
Tidskriftsartikel (refereegranskat)abstract
- We present 850 mu m dust polarization observations of the massive DR21 filament from the B-fields In STar-forming Region Observations (BISTRO) survey, using the POL-2 polarimeter and the SCUBA-2 camera on the James Clerk Maxwell Telescope. We detect ordered magnetic fields perpendicular to the parsec-scale ridge of the DR21 main filament. In the subfilaments, the magnetic fields are mainly parallel to the filamentary structures and smoothly connect to the magnetic fields of the main filament. We compare the POL-2 and Planck dust polarization observations to study the magnetic field structures of the DR21 filament on 0.1-10 pc scales. The magnetic fields revealed in the Planck data are well-aligned with those of the POL-2 data, indicating a smooth variation of magnetic fields from large to small scales. The plane-of-sky magnetic field strengths derived from angular dispersion functions of dust polarization are 0.6-1.0 mG in the DR21 filament and similar to 0.1 mG in the surrounding ambient gas. The mass-to-flux ratios are found to be magnetically supercritical in the filament and slightly subcritical to nearly critical in the ambient gas. The alignment between column density structures and magnetic fields changes from random alignment in the low-density ambient gas probed by Planck to mostly perpendicular in the high-density main filament probed by James Clerk Maxwell Telescope. The magnetic field structures of the DR21 filament are in agreement with MHD simulations of a strongly magnetized medium, suggesting that magnetic fields play an important role in shaping the DR21 main filament and subfilaments.
|
|
| 8. |
- Doi, Yasuo, et al.
(författare)
-
The JCMT BISTRO Survey: Magnetic Fields Associated with a Network of Filaments in NGC 1333
- 2020
-
Ingår i: Astrophysical Journal. - : American Astronomical Society. - 1538-4357 .- 0004-637X. ; 899:1
-
Tidskriftsartikel (refereegranskat)abstract
- We present new observations of the active star formation region NGC 1333 in the Perseus molecular cloud complex from the James Clerk Maxwell Telescope B-Fields In Star-forming Region Observations (BISTRO) survey with the POL-2 instrument. The BISTRO data cover the entire NGC 1333 complex (∼1.5 pc ? 2 pc) at 0.02 pc resolution and spatially resolve the polarized emission from individual filamentary structures for the first time. The inferred magnetic field structure is complex as a whole, with each individual filament aligned at different position angles relative to the local field orientation. We combine the BISTRO data with low- and high- resolution data derived from Planck and interferometers to study the multiscale magnetic field structure in this region. The magnetic field morphology drastically changes below a scale of ∼1 pc and remains continuous from the scales of filaments (∼0.1 pc) to that of protostellar envelopes (∼0.005 pc or ∼1000 au). Finally, we construct simple models in which we assume that the magnetic field is always perpendicular to the long axis of the filaments. We demonstrate that the observed variation of the relative orientation between the filament axes and the magnetic field angles are well reproduced by this model, taking into account the projection effects of the magnetic field and filaments relative to the plane of the sky. These projection effects may explain the apparent complexity of the magnetic field structure observed at the resolution of BISTRO data toward the filament network.
|
|
| 9. |
- Eswaraiah, Chakali, et al.
(författare)
-
The JCMT BISTRO Survey: Revealing the Diverse Magnetic Field Morphologies in Taurus Dense Cores with Sensitive Submillimeter Polarimetry
- 2021
-
Ingår i: Astrophysical Journal Letters. - : American Astronomical Society. - 2041-8213 .- 2041-8205. ; 912:2
-
Tidskriftsartikel (refereegranskat)abstract
- We have obtained sensitive dust continuum polarization observations at 850 μm in the B213 region of Taurus using POL-2 on SCUBA-2 at the James Clerk Maxwell Telescope as part of the B-fields in STar-forming Region Observations (BISTRO) survey. These observations allow us to probe magnetic field (B-field) at high spatial resolution (∼2000 au or ∼0.01 pc at 140 pc) in two protostellar cores (K04166 and K04169) and one prestellar core (Miz-8b) that lie within the B213 filament. Using the Davis-Chandrasekhar-Fermi method, we estimate the B-field strengths in K04166, K04169, and Miz-8b to be 38 ± 14, 44 ± 16, and 12 ± 5 μG, respectively. These cores show distinct mean B-field orientations. The B-field in K04166 is well ordered and aligned parallel to the orientations of the core minor axis, outflows, core rotation axis, and large-scale uniform B-field, in accordance with magnetically regulated star formation via ambipolar diffusion taking place in K04166. The B-field in K04169 is found to be ordered but oriented nearly perpendicular to the core minor axis and large-scale B-field and not well correlated with other axes. In contrast, Miz-8b exhibits a disordered B-field that shows no preferred alignment with the core minor axis or large-scale field. We found that only one core, K04166, retains a memory of the large-scale uniform B-field. The other two cores, K04169 and Miz-8b, are decoupled from the large-scale field. Such a complex B-field configuration could be caused by gas inflow onto the filament, even in the presence of a substantial magnetic flux.
|
|
| 10. |
- Hosseini, Seyed Mehdi, et al.
(författare)
-
Lipase-immobilized chitosan-crosslinked magnetic nanoparticle as a biocatalyst for ring opening esterification of itaconic anhydride
- 2019
-
Ingår i: Biochemical Engineering Journal. - : Elsevier BV. - 1369-703X. ; 143, s. 141-150
-
Tidskriftsartikel (refereegranskat)abstract
- Nano-magnetic biocatalyst particles, lipase-immobilized chitosan-crosslinked magnetic nanoparticles (LCMNs) were prepared by a new approach integrated from magnetic nanoparticle preparation, in situ thin layer coating and crosslinking of chitosan, and enzyme immobilization method. Thin layer coating of magnetic (Fe3O4) by crosslinked chitosan nanoparticles were prepared by reacting FeCl3.6H2O and sodium acetate in ethylene glycol, followed by suspension cross-linking using citric acid on the hydroxyl and amine group of chitosan at neutral pH. The resulting nanoparticles were used to immobilize the lipase from Candida antarctica Lipase B by linking using glutaraldehyde. The particles in each step were characterized by Fourier transform infrared spectrometry (FT-IR), vibrating-sample magnetometer measurements (VSM), and transmission electron microscopy (TEM). The magnetic biocatalyst, LCMN was found to have high storage stability and reusability due to the tightly crosslinked structure of chitosan and covalent bond immobilization. LCMNs were used for the oligomerization of itaconic anhydride by ring opening esterification, and the results were compared with those from free lipase and commercial immobilized lipase. The molecular mass of the products obtained with the biocatalysts showed similar Mn profiles with 308–381. This process represents a green approach for the preparation of both biobased magnetic biocatalysts and functional oligo-esters, and can be applied for both the immobilization of other enzymes and the utilization of photo-curable functional esters as biobased functional materials.
|
|
| 11. |
- Hwang, Jihye, et al.
(författare)
-
The JCMT BISTRO Survey: A Spiral Magnetic Field in a Hub-filament Structure, Monoceros R2
- 2022
-
Ingår i: Astrophysical Journal. - : American Astronomical Society. - 1538-4357 .- 0004-637X. ; 941:1
-
Tidskriftsartikel (refereegranskat)abstract
- We present and analyze observations of polarized dust emission at 850 μm toward the central 1 × 1 pc hub-filament structure of Monoceros R2 (Mon R2). The data are obtained with SCUBA-2/POL-2 on the James Clerk Maxwell Telescope (JCMT) as part of the B-fields in Star-forming Region Observations survey. The orientations of the magnetic field follow the spiral structure of Mon R2, which are well described by an axisymmetric magnetic field model. We estimate the turbulent component of the magnetic field using the angle difference between our observations and the best-fit model of the underlying large-scale mean magnetic field. This estimate is used to calculate the magnetic field strength using the Davis–Chandrasekhar–Fermi method, for which we also obtain the distribution of volume density and velocity dispersion using a column density map derived from Herschel data and the C18O (J = 3 - 2) data taken with HARP on the JCMT, respectively. We make maps of magnetic field strengths and mass-to-flux ratios, finding that magnetic field strengths vary from 0.02 to 3.64 mG with a mean value of 1.0 ± 0.06 mG, and the mean critical mass-to-flux ratio is 0.47 ± 0.02. Additionally, the mean Alfvén Mach number is 0.35 ± 0.01. This suggests that, in Mon R2, the magnetic fields provide resistance against large-scale gravitational collapse, and the magnetic pressure exceeds the turbulent pressure. We also investigate the properties of each filament in Mon R2. Most of the filaments are aligned along the magnetic field direction and are magnetically subcritical.
|
|
| 12. |
|
|
| 13. |
- Karoly, Janik, et al.
(författare)
-
The JCMT BISTRO Survey: Studying the Complex Magnetic Field of L43
- 2023
-
Ingår i: Astrophysical Journal. - 1538-4357 .- 0004-637X. ; 952:1
-
Tidskriftsartikel (refereegranskat)abstract
- We present observations of polarized dust emission at 850 mu m from the L43 molecular cloud, which sits in the Ophiuchus cloud complex. The data were taken using SCUBA-2/POL-2 on the James Clerk Maxwell Telescope as a part of the BISTRO large program. L43 is a dense (N-H2 similar to 10(22) - 10(23) cm(-2)) complex molecular cloud with a submillimeter-bright starless core and two protostellar sources. There appears to be an evolutionary gradient along the isolated filament that L43 is embedded within, with the most evolved source closest to the Sco OB2 association. One of the protostars drives a CO outflow that has created a cavity to the southeast. We see a magnetic field that appears to be aligned with the cavity walls of the outflow, suggesting interaction with the outflow. We also find a magnetic field strength of up to similar to 160 +/- 30 mu G in the main starless core and up to similar to 90 +/- 40 mu G in the more diffuse, extended region. These field strengths give magnetically super- and subcritical values, respectively, and both are found to be roughly trans-Alfvenic. We also present a new method of data reduction for these denser but fainter objects like starless cores.
|
|
| 14. |
- Kwon, Woojin, et al.
(författare)
-
B-fields in Star-forming Region Observations (BISTRO): Magnetic Fields in the Filamentary Structures of Serpens Main
- 2022
-
Ingår i: Astrophysical Journal. - : American Astronomical Society. - 1538-4357 .- 0004-637X. ; 926:2
-
Tidskriftsartikel (refereegranskat)abstract
- We present 850 mu m polarimetric observations toward the Serpens Main molecular cloud obtained using the POL-2 polarimeter on the James Clerk Maxwell Telescope as part of the B-fields In STar-forming Region Observations survey. These observations probe the magnetic field morphology of the Serpens Main molecular cloud on about 6000 au scales, which consists of cores and six filaments with different physical properties such as density and star formation activity. Using the histogram of relative orientation (HRO) technique, we find that magnetic fields are parallel to filaments in less-dense filamentary structures where NH2 < 0.93 x 10(22) cm(-2) (magnetic fields perpendicular to density gradients), while they are perpendicular to filaments (magnetic fields parallel to density gradients) in dense filamentary structures with star formation activity. Moreover, applying the HRO technique to denser core regions, we find that magnetic field orientations change to become perpendicular to density gradients again at NH2 approximate to 4.6 x 10(22) NH2 approximate to 16 x 10(22) cm(-2), magnetic fields change back to being parallel to density gradients once again, which can be understood to be due to magnetic fields being dragged in by infalling material. In addition, we estimate the magnetic field strengths of the filaments (B-POS = 60-300 mu G)) using the Davis-Chandrasekhar-Fermi method and discuss whether the filaments are gravitationally unstable based on magnetic field and turbulence energy densities.
|
|
| 15. |
- Lee, Hyun Ju, et al.
(författare)
-
Multi-step enzymatic synthesis of 1,9-nonanedioic acid from a renewable fatty acid and its application for the enzymatic production of biopolyesters
- 2019
-
Ingår i: Polymers. - : MDPI AG. - 2073-4360. ; 11:10
-
Tidskriftsartikel (refereegranskat)abstract
- 1,9-Nonanedioic acid is one of the valuable building blocks for producing polyesters and polyamides. Thereby, whole-cell biosynthesis of 1,9-nonanedioic acid from oleic acid has been investigated. A recombinant Corynebacterium glutamicum, expressing the alcohol/aldehyde dehydrogenases (ChnDE) of Acinetobacter sp. NCIMB 9871, was constructed and used for the production of 1,9-nonanedioic acid from 9-hydroxynonanoic acid, which had been produced from oleic acid. When 9-hydroxynonanoic acid was added to a concentration of 20 mM in the reaction medium, 1,9-nonanedioic acid was produced to 16 mM within 8 h by the recombinant C. glutamicum. The dicarboxylic acid was isolated via crystallization and then used for the production of biopolyester by a lipase. For instance, the polyesterification of 1,9-nonanedioic acid and 1,8-octanediol in diphenyl ether by the immobilized lipase B from Candida antarctica led to formation of the polymer product with the number-average molecular weight (Mn) of approximately 21,000. Thereby, this study will contribute to biological synthesis of long chain dicarboxylic acids and their application for the enzymatic production of long chain biopolyesters.
|
|
| 16. |
- Lyo, A-Ran, et al.
(författare)
-
The JCMT BISTRO Survey: An 850/450 mu m Polarization Study of NGC 2071IR in Orion B
- 2021
-
Ingår i: Astrophysical Journal. - : American Astronomical Society. - 1538-4357 .- 0004-637X. ; 918:2
-
Tidskriftsartikel (refereegranskat)abstract
- We present the results of simultaneous 450 mu m and 850 mu m polarization observations toward the massive star-forming region NGC 2071IR, a target of the BISTRO (B-fields in STar-forming Region Observations) Survey, using the POL-2 polarimeter and SCUBA-2 camera mounted on the James Clerk Maxwell Telescope. We find a pinched magnetic field morphology in the central dense core region, which could be due to a rotating toroidal disklike structure and a bipolar outflow originating from the central young stellar object IRS 3. Using the modified Davis-Chandrasekhar-Fermi method, we obtain a plane-of-sky magnetic field strength of 563 +/- 421 mu G in the central similar to 0.12 pc region from 850 mu m polarization data. The corresponding magnetic energy density of 2.04 x 10(-8) erg cm(-3) is comparable to the turbulent and gravitational energy densities in the region. We find that the magnetic field direction is very well aligned with the whole of the IRS 3 bipolar outflow structure. We find that the median value of polarization fractions is 3.0% at 450 mu m in the central 3 ' region, which is larger than the median value of 1.2% at 850 mu m. The trend could be due to the better alignment of warmer dust in the strong radiation environment. We also find that polarization fractions decrease with intensity at both wavelengths, with slopes, determined by fitting a Rician noise model of 0.59 +/- 0.03 at 450 mu m and 0.36 +/- 0.04 at 850 mu m, respectively. We think that the shallow slope at 850 mu m is due to grain alignment at the center being assisted by strong radiation from the central young stellar objects.
|
|
| 17. |
- Ngoc, Nguyen Bich, et al.
(författare)
-
Observations of Magnetic Fields Surrounding LkH alpha 101 Taken by the BISTRO Survey with JCMT-POL-2
- 2021
-
Ingår i: Astrophysical Journal. - : American Astronomical Society. - 1538-4357 .- 0004-637X. ; 908:1
-
Tidskriftsartikel (refereegranskat)abstract
- We report the first high spatial resolution measurement of magnetic fields surrounding LkH alpha 101, part of the Auriga-California molecular cloud. The observations were taken with the POL-2 polarimeter on the James Clerk Maxwell Telescope within the framework of the B-fields In Star-forming Region Observations (BISTRO) survey. Observed polarization of thermal dust emission at 850 mu m is found to be mostly associated with the redshifted gas component of the cloud. The magnetic field displays a relatively complex morphology. Two variants of the Davis-Chandrasekhar-Fermi method, unsharp masking and structure function, are used to calculate the strength of magnetic fields in the plane of the sky, yielding a similar result of B-POS similar to 115 mu G. The mass-to-magnetic-flux ratio in critical value units, lambda similar to 0.3, is the smallest among the values obtained for other regions surveyed by POL-2. This implies that the LkH alpha 101 region is subcritical, and the magnetic field is strong enough to prevent gravitational collapse. The inferred delta B/B-0 similar to 0.3 implies that the large-scale component of the magnetic field dominates the turbulent one. The variation of the polarization fraction with total emission intensity can be fitted by a power law with an index of alpha = 0.82 0.03, which lies in the range previously reported for molecular clouds. We find that the polarization fraction decreases rapidly with proximity to the only early B star (LkH alpha 101) in the region. Magnetic field tangling and the joint effect of grain alignment and rotational disruption by radiative torques can potentially explain such a decreasing trend.
|
|
| 18. |
- Pyo, Sang Hyun, et al.
(författare)
-
A sustainable synthetic route for biobased 6-hydroxyhexanoic acid, adipic acid and ϵ-caprolactone by integrating bio- And chemical catalysis
- 2020
-
Ingår i: Green Chemistry. - : Royal Society of Chemistry (RSC). - 1463-9262 .- 1463-9270. ; 22:14, s. 4450-4455
-
Tidskriftsartikel (refereegranskat)abstract
- A green route for the production of 6-carbon polymer building blocks 6-hydroxyhexanoic acid, adipic acid and ϵ-caprolactone from 1,6-hexanediol, a hydrogenation product of biobased 5-hydroxymethylfurfural is reported. Gluconobacter oxydans oxidized 1,6-hexanediol completely to adipic acid, and selectively at pH 6-7 to 6-hydroxyhexanoic acid, which was converted to ϵ-caprolactone by catalytic cyclization. This journal is
|
|
| 19. |
- Pyo, Sang Hyun, et al.
(författare)
-
Dimethyl carbonate as a green chemical
- 2017
-
Ingår i: Current Opinion in Green and Sustainable Chemistry. - : Elsevier BV. - 2452-2236. ; 5, s. 61-66
-
Forskningsöversikt (refereegranskat)abstract
- Dimethyl carbonate (DMC) is an established solvent and a green reagent which continues to attract attention. It is a nonpolar aprotic solvent with good miscibility with water, biodegrades readily in the atmosphere, and is non-toxic. DMC is classified in the greenest “recommended” bracket according to the solvent selection guide, and can be a potential replacement for methyl ethyl ketone, ethyl acetate, methyl isobutyl ketone, and most other ketones. Currently, the most prevalent commercial pathway for the production of DMC is through oxidative carbonylation of methanol using O2; in addition, new alternative processes for DMC from CO2 are being developed. DMC has found several applications such as the electrolyte in lithium rechargeable batteries and as a solvent in several reactions including pharmaceutically relevant synthesis and in biocatalysis. This report provides a brief overview of physical-thermodynamic-, toxicological- and ecotoxicological properties, production methods, reactivity, and applications of DMC as an environmentally benign chemical in chemical- and biotechnical processes.
|
|
| 20. |
- Stanaway, Jeffrey D., et al.
(författare)
-
Global, regional, and national comparative risk assessment of 84 behavioural, environmental and occupational, and metabolic risks or clusters of risks for 195 countries and territories, 1990-2017: A systematic analysis for the Global Burden of Disease Study 2017
- 2018
-
Ingår i: The Lancet. - 1474-547X .- 0140-6736. ; 392:10159, s. 1923-1994
-
Tidskriftsartikel (refereegranskat)abstract
- Background The Global Burden of Diseases, Injuries, and Risk Factors Study (GBD) 2017 comparative risk assessment (CRA) is a comprehensive approach to risk factor quantification that offers a useful tool for synthesising evidence on risks and risk-outcome associations. With each annual GBD study, we update the GBD CRA to incorporate improved methods, new risks and risk-outcome pairs, and new data on risk exposure levels and risk- outcome associations. Methods We used the CRA framework developed for previous iterations of GBD to estimate levels and trends in exposure, attributable deaths, and attributable disability-adjusted life-years (DALYs), by age group, sex, year, and location for 84 behavioural, environmental and occupational, and metabolic risks or groups of risks from 1990 to 2017. This study included 476 risk-outcome pairs that met the GBD study criteria for convincing or probable evidence of causation. We extracted relative risk and exposure estimates from 46 749 randomised controlled trials, cohort studies, household surveys, census data, satellite data, and other sources. We used statistical models to pool data, adjust for bias, and incorporate covariates. Using the counterfactual scenario of theoretical minimum risk exposure level (TMREL), we estimated the portion of deaths and DALYs that could be attributed to a given risk. We explored the relationship between development and risk exposure by modelling the relationship between the Socio-demographic Index (SDI) and risk-weighted exposure prevalence and estimated expected levels of exposure and risk-attributable burden by SDI. Finally, we explored temporal changes in risk-attributable DALYs by decomposing those changes into six main component drivers of change as follows: (1) population growth; (2) changes in population age structures; (3) changes in exposure to environmental and occupational risks; (4) changes in exposure to behavioural risks; (5) changes in exposure to metabolic risks; and (6) changes due to all other factors, approximated as the risk-deleted death and DALY rates, where the risk-deleted rate is the rate that would be observed had we reduced the exposure levels to the TMREL for all risk factors included in GBD 2017.
|
|
| 21. |
- Tahani, Mehrnoosh, et al.
(författare)
-
JCMT BISTRO Observations: Magnetic Field Morphology of Bubbles Associated with NGC 6334
- 2023
-
Ingår i: Astrophysical Journal. - : American Astronomical Society. - 1538-4357 .- 0004-637X. ; 944:2
-
Tidskriftsartikel (refereegranskat)abstract
- We study the Hii regions associated with the NGC 6334 molecular cloud observed in the submillimeter and taken as part of the B-fields In STar-forming Region Observations Survey. In particular, we investigate the polarization patterns and magnetic field morphologies associated with these Hii regions. Through polarization pattern and pressure calculation analyses, several of these bubbles indicate that the gas and magnetic field lines have been pushed away from the bubble, toward an almost tangential (to the bubble) magnetic field morphology. In the densest part of NGC 6334, where the magnetic field morphology is similar to an hourglass, the polarization observations do not exhibit observable impact from Hii regions. We detect two nested radial polarization patterns in a bubble to the south of NGC 6334 that correspond to the previously observed bipolar structure in this bubble. Finally, using the results of this study, we present steps (incorporating computer vision; circular Hough transform) that can be used in future studies to identify bubbles that have physically impacted magnetic field lines.
|
|
| 22. |
- Wang, Pengrui, et al.
(författare)
-
Sustainable synthesis and characterization of a bisphenol A-free polycarbonate from a six-membered dicyclic carbonate
- 2018
-
Ingår i: Polymer Chemistry. - : Royal Society of Chemistry (RSC). - 1759-9954 .- 1759-9962. ; 9:27, s. 3798-3807
-
Tidskriftsartikel (refereegranskat)abstract
- A bisphenol A (2,2-bis(4-hydroxyphenyl)propane, BPA)-free polycarbonate (PC) from a six-membered di-cyclic carbonate, di-trimethylolpropane di-cyclic carbonate (DTMPC), was developed as a new type of PC by ring opening homo-polymerization. The polymerization was controlled by using metal-free organic-based catalyst systems. The results indicated that the conversion rate depends on the basicity of the catalyst in the order of 1,5,7-triazabicyclo[4.4.0]dec-5-ene (TBD), 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU), 4-dimethylaminopyridine (DMAP), and triethylamine (TEA) from high to low. Over 99% conversion of DTMPC was obtained at 130 °C within 15 min by TBD, DBU and DMAP. The resulting PC as a homo-polymer showed high optical transparency and hardness, low swelling property in organic solvents, and thermal stability at temperatures as high as 200 °C. A high cell viability and cyto-compatibility of C3H 10T1/2 cells seeded directly on the surface of PC films were obtained. This implied that PC is a viable material for biomedical and consumer products applications where safety is an important consideration.
|
|
| 23. |
- Warner, John J., et al.
(författare)
-
3D printable non-isocyanate polyurethanes with tunable material properties
- 2019
-
Ingår i: Polymer Chemistry. - : Royal Society of Chemistry (RSC). - 1759-9954 .- 1759-9962. ; 10:34, s. 4665-4674
-
Tidskriftsartikel (refereegranskat)abstract
- Green chemistry-based non-isocyanate polyurethanes (NIPU) are synthesized and 3D-printed via rapid, projection photopolymerization into compliant mechanisms of 3D structure with spatially-localized material properties. Trimethylolpropane allyl ether-cyclic carbonate is used to couple the unique properties of two types of reaction chemistry: (1) primary diamine-cyclic carbonate ring-opening conjugation for supplanting conventional isocyanate-polyol reactions in creating urethane groups, with the additional advantage of enabling modular segment interchangeability within the diurethane prepolymers; and (2) thiol-ene (click) conjugation for non-telechelic, low monodispersity, quasi-crystalline-capable, and alternating step-growth co-photopolymerization. Fourier transform infrared spectroscopy is used to monitor the functional group transformation in reactions, and to confirm these process-associated molecular products. The extent of how these processes utilize molecular tunability to affect material properties were investigated through measurement-based comparison of the various polymer compositions: frequency-related dynamic mechanical analysis, tension-related elastic-deformation mechanical analysis, and material swelling analysis. Stained murine myoblasts cultured on NIPU slabs were evaluated via fluorescent microscopy for "green-chemistry" affects on cytocompatibility and cell adhesion to assess potential biofouling resistance. 3D multi-material structures with micro-features were printed, thus demonstrating the capability to spatially pattern different NIPU materials in a controlled manner and build compliant mechanisms.
|
|
