| 1. |
- Tran, Quoc Cuong, et al.
(författare)
-
Novel Ensemble Landslide Predictive Models Based on the Hyperpipes Algorithm : A Case Study in the Nam Dam Commune, Vietnam
- 2020
-
Ingår i: Applied Sciences. - Switzerland : MDPI. - 2076-3417. ; 10:11
-
Tidskriftsartikel (refereegranskat)abstract
- Development of landslide predictive models with strong prediction power has become a major focus of many researchers. This study describes the first application of the Hyperpipes (HP) algorithm for the development of the five novel ensemble models that combine the HP algorithm and the AdaBoost (AB), Bagging (B), Dagging, Decorate, and Real AdaBoost (RAB) ensemble techniques for mapping the spatial variability of landslide susceptibility in the Nam Dan commune, Ha Giang province, Vietnam. Information on 76 historical landslides and ten geo-environmental factors (slope degree, slope aspect, elevation, topographic wetness index, curvature, weathering crust, geology, river density, fault density, and distance from roads) were used for the construction of the training and validation datasets that are the prerequisites for building and testing the proposed models. Using different performance metrics (i.e., the area under the receiver operating characteristic curve (AUC), negative predictive value, positive predictive value, accuracy, sensitivity, specificity, root mean square error, and Kappa), we verified the proficiency of all five ensemble learning techniques in increasing the fitness and predictive powers of the base HP model. Based on the AUC values derived from the models, the ensemble ABHP model that yielded an AUC value of 0.922 was identified as the most efficient model for mapping the landslide susceptibility in the Nam Dan commune, followed by RABHP (AUC = 0.919), BHP (AUC = 0.909), Dagging-HP (AUC = 0.897), Decorate-HP (AUC = 0.865), and the single HP model (AUC = 0.856), respectively. The novel ensemble models proposed for the Nam Dan commune and the resultant susceptibility maps can aid land-use planners in the development of efficient mitigation strategies in response to destructive landslides.
|
|
| 2. |
- Giang, Kim Bao, et al.
(författare)
-
Relative Importance of Different Attributes of Graphic Health Warnings on Tobacco Packages in Viet Nam
- 2016
-
Ingår i: Asian Pacific Journal of Cancer Prevention. - 1513-7368. ; 17, s. 79-84
-
Tidskriftsartikel (refereegranskat)abstract
- Graphic health warnings (GHW) on tobacco packages have proven to be effective in increasing quit attempts among smokers and reducing initial smoking among adolescents. This research aimed to examine the relative importance of different attributes of graphic health warnings on tobacco packages in Viet Nam. A discrete choice experimental (DCE) design was applied with a conditional logit model. In addition, a ranking method was used to list from the least to the most dreadful GHW labels. With the results from DCE model, graphic type was shown to be the most important attribute, followed by cost and coverage area of GHW. The least important attribute was position of the GHW. Among 5 graphic types (internal lung cancer image, external damaged teeth, abstract image, human suffering image and text), the image of lung cancer was found to have the strongest influence on both smokers and non-smokers. With ranking method, the image of throat cancer and heart diseases were considered the most dreadful images. GHWs should be designed with these attributes in mind, to maximise influence on purchase among both smokers and non-smokers.
|
|
| 3. |
- Bett, Bernard, et al.
(författare)
-
Spatiotemporal analysis of historical records (2001-2012) on dengue fever in Vietnam and development of a statistical model for forecasting risk
- 2019
-
Ingår i: PLOS ONE. - : Public Library of Science (PLoS). - 1932-6203. ; 14:11
-
Tidskriftsartikel (refereegranskat)abstract
- BACKGROUND: Dengue fever is the most widespread infectious disease of humans transmitted by Aedes mosquitoes. It is the leading cause of hospitalization and death in children in the Southeast Asia and western Pacific regions. We analyzed surveillance records from health centers in Vietnam collected between 2001-2012 to determine seasonal trends, develop risk maps and an incidence forecasting model.METHODS: The data were analyzed using a hierarchical spatial Bayesian model that approximates its posterior parameter distributions using the integrated Laplace approximation algorithm (INLA). Meteorological, altitude and land cover (LC) data were used as predictors. The data were grouped by province (n = 63) and month (n = 144) and divided into training (2001-2009) and validation (2010-2012) sets. Thirteen meteorological variables, 7 land cover data and altitude were considered as predictors. Only significant predictors were kept in the final multivariable model. Eleven dummy variables representing month were also fitted to account for seasonal effects. Spatial and temporal effects were accounted for using Besag-York-Mollie (BYM) and autoregressive (1) models. Their levels of significance were analyzed using deviance information criterion (DIC). The model was validated based on the Theil's coefficient which compared predicted and observed incidence estimated using the validation data. Dengue incidence predictions for 2010-2012 were also used to generate risk maps.RESULTS: The mean monthly dengue incidence during the period was 6.94 cases (SD 14.49) per 100,000 people. Analyses on the temporal trends of the disease showed regular seasonal epidemics that were interrupted every 3 years (specifically in July 2004, July 2007 and September 2010) by major fluctuations in incidence. Monthly mean minimum temperature, rainfall, area under urban settlement/build-up areas and altitude were significant in the final model. Minimum temperature and rainfall had non-linear effects and lagging them by two months provided a better fitting model compared to using unlagged variables. Forecasts for the validation period closely mirrored the observed data and accurately captured the troughs and peaks of dengue incidence trajectories. A favorable Theil's coefficient of inequality of 0.22 was generated.CONCLUSIONS: The study identified temperature, rainfall, altitude and area under urban settlement as being significant predictors of dengue incidence. The statistical model fitted the data well based on Theil's coefficient of inequality, and risk maps generated from its predictions identified most of the high-risk provinces throughout the country.
|
|
| 4. |
- Bui, Ha Thi Thu, et al.
(författare)
-
The Association Between Gender Inequalities and Women's Utilization of Maternal Health Services : A Cross-Sectional Survey in Eight South Central Coast Provinces, Vietnam
- 2018
-
Ingår i: Journal of Public Health Management and Practice. - 1078-4659 .- 1550-5022. ; 24:2, s. S19-S27
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Gender inequalities influence the utilization of maternal health services in Vietnam, but little research has been published. This study, therefore, aimed to explore the association between gender inequalities and women's utilization of maternal health services in Vietnam.Methods: The study was conducted in 8 provinces in the South Central Coast region of Vietnam during August 2013 to May 2014. A total of 907 women who delivered a year prior to the date of interview participated in the study. A multiple logistic regression model was used to examine the association between gender inequalities (including sociodemographic determinants of health) and utilization of 4 or more antenatal care (ANC4+) services, institutional delivery, and ever used contraceptive methods.Results: The utilization rate of maternal health services was varied, from 53.9% for ANC4+ to 87.7% for ever used a contraceptive method and 97% for institutional delivery. Ethnicity was identified as the most influential variable out of all sociodemographic determinants of health. Regarding gender inequalities, couple communication was the only variable having significant association with women's utilization of maternal health services.Conclusion: Women's equal role within context of their daily life and relations with their husbands (discussing maternal care with husband and having equal income to husband) supported their use of maternal health services. Therefore, there should be concerted efforts from all relevant stakeholders including the health system to focus on disadvantaged women in planning and delivery of maternal health services, especially to ethnic minority women. Male involvement strategy should be implemented to promote maternal health care, especially during the prenatal and postpartum period. To provide more culturally sensitive and right-based approaches in delivery of maternal health services to disadvantaged women in Vietnam, interventions are recommended that promote male involvement, that is, to engage men in service delivery to adapt and ensure the most appropriate and effective maternal health care.
|
|
| 5. |
- Cao, Zhen, et al.
(författare)
-
Electrophoretic deposition surfaces to enhance HFE-7200 pool boiling heat transfer and critical heat flux
- 2019
-
Ingår i: International Journal of Thermal Sciences. - : Elsevier BV. - 1290-0729. ; 146
-
Tidskriftsartikel (refereegranskat)abstract
- Modulated nanoparticle-coating surfaces were fabricated by an improved electrophoretic deposition technique in this study. Pool boiling experiments were studied for HFE-7200 on the modulated nanoparticle-coating surfaces, with a smooth surface and uniform coating surfaces as comparison. It was found that the present modulated coating surfaces can enhance the heat transfer coefficient and the critical heat flux by 60% and 20%–40%, respectively, in comparison to the smooth surface, while the uniform coating surface can improve heat transfer coefficients by maximum 100%, but cannot enhance critical heat fluxes. Heat transfer on the modulated nanoparticle-coating surfaces was theoretically analyzed by a mechanistic model which considered free convection, transient conduction and microlayer evaporation. The heat transfer can be predicted by the model, especially at low-to-moderate heat fluxes. Additionally, referring to the bubble visualization at critical heat fluxes, possible mechanisms to trigger critical heat fluxes were discussed. Afterwards, a critical heat flux model originating from the Zuber hydrodynamic instability model, was employed to predict the experimental results, showing a good prediction ability.
|
|
| 6. |
- Cao, Zhen, et al.
(författare)
-
Enhancement of HFE-7200 pool boiling heat transfer on copper surfaces with nanoparticle coatings
- 2018
-
Ingår i: Proceeding: International Heat Transfer Conference 16. - 2377-424X. ; , s. 1341-1347
-
Konferensbidrag (refereegranskat)abstract
- Saturated pool boiling heat transfer of HFE-7200 is investigated experimentally on copper surfaces with nanoparticle coatings at atmospheric pressure. The coatings are generated by an electrophoretic deposition method. Two modified surfaces are prepared with Cu-Zinc nanoparticles of 0.3 mg and 0.6 mg, respectively. During the deposition, ethanol works as the solvent while the electrical potential and deposition time are controlled as 9.5 V and 30 min, respectively. The experimental results show heat transfer is considerably enhanced by the nanoparticle coatings. The surface with 0.6 mg nanoparticles (EDS-2) performs better than the surface with 0.3 mg nanoparticles (EDS-1), and a maximum 140% heat transfer enhancement is achieved on the surface EDS-2 compared with the SS. However, the critical heat flux is not enhanced by the coatings but even slightly decreased. A high speed visualization is employed to capture bubble behavior. It is found that bubbles on EDS-1 and EDS-2 have smaller sizes and higher departure frequency than those on the SS before reaching the critical heat flux. However, at critical heat fluxes, a vapor blanket appears on all surfaces.
|
|
| 7. |
- Cao, Zhen, et al.
(författare)
-
Enhancement of HFE-7200 pool boiling heat transfer on copper surfaces with nanoparticle coatings
- 2018
-
Ingår i: International Heat Transfer Conference 16. - Connecticut : Begell House. - 9781567004748 - 9781567004731 ; , s. -1347
-
Konferensbidrag (refereegranskat)abstract
- Saturated pool boiling heat transfer of HFE-7200 is investigated experimentally on copper surfaces with nanoparticle coatings at atmospheric pressure. The coatings are generated by an electrophoretic deposition method. Two modified surfaces are prepared with Cu-Zinc nanoparticles of 0.3 mg and 0.6 mg, respectively. During the deposition, ethanol works as the solvent while the electrical potential and deposition time are controlled as 9.5 V and 30 min, respectively. The experimental results show heat transfer is considerably enhanced by the nanoparticle coatings. The surface with 0.6 mg nanoparticles (EDS-2) performs better than the surface with 0.3 mg nanoparticles (EDS-1), and a maximum 140% heat transfer enhancement is achieved on the surface EDS-2 compared with the SS. However, the critical heat flux is not enhanced by the coatings but even slightly decreased. A high speed visualization is employed to capture bubble behavior. It is found that bubbles on EDS-1 and EDS-2 have smaller sizes and higher departure frequency than those on the SS before reaching the critical heat flux. However, at critical heat fluxes, a vapor blanket appears on all surfaces.
|
|
| 8. |
- Cao, Zhen, et al.
(författare)
-
Nucleate pool boiling heat transfer of acetone and HFE7200 on copper surfaces with nanoparticle coatings
- 2019
-
Ingår i: Energy Procedia. - : Elsevier BV. - 1876-6102. ; 158, s. 5872-5879
-
Tidskriftsartikel (refereegranskat)abstract
- Nucleate pool boiling performance of two well-wetting liquids, i.e., acetone and HFE7200, on three nanoparticle-coatedsurfaces were experimentally studied and compared with that of the smoothsurface. Electrophoretic deposition was used to fabricate nano-porous surfaces.Surface roughness, static and advancing contact angles, capillarity of the smoothand coated surfaces were characterized. Compared to the smooth surface, thenanoparticle-coated surfaces decreased the wall superheat by more than 50% foracetone and 65% for HFE7200 at the same heat flux level, and accordinglyenhanced the heat transfer coefficient by up to 85% for acetone and up to 200%for HFE7200. Bubble departure diameters were measured and correlated with theadvancing contact angle, the capillary length and the Jacob number. A newmechanistic heat transfer model was proposed based on the heat flux partitionmethod. The advancing contact angle was suggested to be used for calculation ofthe active nucleation site density. Based on the mechanistic model, transientheat conduction on and around nucleation sites over the whole bubble cyclecontributes the most (>70%) to the total heat flux, while microlayerevaporation contributes around 10-30% to the total heat flux, with negligiblenatural convection. The critical heat flux was not enhanced for the twowell-wetting liquids.
|
|
| 9. |
- Cao, Zhen, et al.
(författare)
-
Pool boiling heat transfer enhancement of water by gold nanoparticles with an electrophoretic deposition method
- 2019
-
Ingår i: Proceedings of the Asme International Mechanical Engineering Congress and Exposition, 2018, vol 8b. - : Amer Soc Mechanical Engineers. - 9780791852125
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- Saturated pool boiling heat transfer of water is investigated experimentally on copper surfaces with nanoparticle coatings at atmospheric pressure. The coatings are generated by an electrophoretic deposition method (EPD). Three modified surfaces are prepared with gold nanoparticles of 0.20 mg, 0.25 mg and 0.30 mg, respectively. During the deposition, ethanol works as the solvent while the electrical potential and deposition time are controlled as 9.5 V and 30 min, respectively. The experimental results show that heat transfer coefficients (HTC) and critical heat fluxes (CHF) are enhanced on the modified surfaces. HTC increases with decreasing thickness of the coating, while CHF increases with increasing thickness of the coating. CHFs of EPD-0.20 mg, EPD-0.25 mg and EPD-0.30 mg are 93 W/cm2, 123 W/cm2 and 142 W/cm2, respectively, which are increased by 7%, 41% and 63% compared with the smooth surface. EPD-0.20 mg performs the best on heat transfer, with a maximum enhancement of around 60%. At the end, a brief review about mechanistic models of heat transfer at low and moderate heat fluxes is provided, based on which, the reasons why heat transfer is enhanced are discussed.
|
|
| 10. |
- Cao, Zhen, et al.
(författare)
-
Pool boiling of HFE-7200 on nanoparticle-coating surfaces: Experiments and heat transfer analysis
- 2018
-
Ingår i: International Journal of Heat and Mass Transfer. - : Elsevier BV. - 0017-9310 .- 1879-2189. ; 133, s. 548-560
-
Tidskriftsartikel (refereegranskat)abstract
- In the present study, an electrophoretic deposition method was employed to modify copper surfaces withCu-Zn (100 nm) nanoparticles. Pool boiling heat transfer of HFE-7200 on the modified surfaces was experimentally studied. The results showed that the heat transfer coefficient on the modified surfaces was significantly enhanced compared with that on a smooth surface, e.g., a maximum 100% enhancement,while the maximum superheat on the modified surfaces was around 20 K lower than that on the smooth surface. However, the critical heat flux (CHF) was not improved considerably, and supplementary tests indicated that the wickability of HFE-7200 was almost the same on the modified surfaces and the smooth surface. The departure diameters of bubbles were recorded by a high speed camera, which were compared with several models in literature. Active nucleation site sizes were evaluated by the Hsu nucleation theory and active nucleation site densities were estimated by appropriate correlations.In addition, a heat transfer model, considering natural convection, re-formation of thermal boundary layer and microlayer evaporation, was formulated to predict the heat transfer on the modified surfaces and the smooth surface. A relatively good prediction was achieved.
|
|
| 11. |
- Chuong, Nguyen Canh, et al.
(författare)
-
Amniocentesis test uptake for congenital defects : Decision of pregnant women in Vietnam
- 2018
-
Ingår i: Health Care for Women International. - : TAYLOR & FRANCIS INC. - 0739-9332 .- 1096-4665. ; 39:4, s. 493-504
-
Tidskriftsartikel (refereegranskat)abstract
- Our study aimed to identify the knowledge, attitude, and factors associated with uptake of amniocentesis test amongst pregnant women of advanced maternal age (35+ years old). A cross-sectional survey was performed on 481 participants in 2016. Women with higher educational attainment, higher income level, having a baby with congenital defects, and women with better knowledge and/or attitude about amniocentesis test were more likely to accept the test. Our study suggested the importance of counseling for women and more time should be given for them to absorb information before they make their decision to uptake the amniocentesis test.
|
|
| 12. |
- Hoang-Minh, Thao, et al.
(författare)
-
Use of TEM-EDX for structural formula identification of clay minerals : a case study of Di Linh bentonite, Vietnam
- 2019
-
Ingår i: Journal of applied crystallography. - : International Union of Crystallography (IUCr). - 0021-8898 .- 1600-5767. ; 52:1, s. 133-147
-
Tidskriftsartikel (refereegranskat)abstract
- Transmission electron microscopy linked with energy-dispersive X-ray spectroscopy (TEM-EDX) was applied to characterize mineralogical signals ofweathering processes in the Di Linh bentonite deposit (Vietnam) and to visualize the effects of Na activation on the smectitic phases. Modelling of X ray diffraction patterns (oriented mount) was applied in order to refine the computed structural formula. X-ray diffraction, X-ray fluorescence and Fouriertransform infrared spectroscopy (FT-IR) methods were also applied to verify the TEM-EDX results. An Excel-based routine has been developed in this research to allow fast computation of structural formulae and classification of the investigated clay particles. This routine supports the acquirement of 100 300 TEM-EDX analyses as a representative set of individual particles for each sample. The Excel-based routine involves end members of different clay mineral groups and interstratifications with two or three members (e.g. illite smectite interstratifications – IS-ml; dioctahedral vermiculite–smectite interstratifications – diVS-ml; and kaolinite–montmorillonite–dioctahedral vermiculite interstratifications – KSV-ml). The routine is now freely available. According to the identification procedure, the <2 mm fraction of the Di Linh bentonite (Vietnam) is composed mainly of K- and charge-deficient illite smectite interstratifications (or diVS-ml): montmorillonite-rich randomly ordered (R0) type and illite-rich regularly ordered (R1) type. Additionally, Fe-poor KSV-ml was identified.Industrial Na activation of the Di Linh bentonite resulted in an increase of theR1 diVS-ml portion and dissolution of a large part of the smectite-rich phases.The TEM-EDX approach also gave analytical proof of a sedimentary processfor Di Linh smectite. The parent muscovite was altered in two different environments: (i) K-leaching and layer-wise alteration into kaolinite (weathering), and (ii) further edge-controlled alteration of mica into lath-like montmorillonite particles associated with a dissolution of kaolinite layers from the former kaolinite–mica intergrowths by heat impact (basalt flow).
|
|
| 13. |
- Larpant, Nutcha, et al.
(författare)
-
Sensing by wireless reading Ag/AgCl redox conversion on RFID tag : universal, battery-less biosensor design
- 2019
-
Ingår i: Scientific Reports. - : Nature Publishing Group. - 2045-2322. ; 9
-
Tidskriftsartikel (refereegranskat)abstract
- Massive integration of biosensors into design of Internet-of-Things (IoT) is vital for progress of healthcare. However, the integration of biosensors is challenging due to limited availability of battery-less biosensor designs. In this work, a combination of nanomaterials for wireless sensing of biological redox reactions is described. The design exploits silver nanoparticles (AgNPs) as part of the RFID tag antenna. We demonstrate that a redox enzyme, particularly, horseradish peroxidase (HRP), can convert AgNPs into AgCl in the presence of its substrate, hydrogen peroxide. This strongly changes the impedance of the tag. The presented example exploits gold nanoparticle (AuNP)-assisted electron transfer (ET) between AgNPs and HRP. We show that AuNP is a vital intermediate for establishing rapid ET between the enzyme and AgNPs. As an example, battery-less biosensor-RFID tag designs for H2O2 and glucose are demonstrated. Similar battery-less sensors can be constructed to sense redox reactions catalysed by other oxidoreductase enzymes, their combinations, bacteria or other biological and even non-biological catalysts. In this work, a fast and general route for converting a high number of redox reaction based sensors into battery-less sensor-RFID tags is described.
|
|
| 14. |
- Le, Vui Thi, et al.
(författare)
-
Sex Ratio at Birth in Vietnam : Results From Data in CHILILAB HDSS, 2004 to 2013
- 2017
-
Ingår i: Asia-Pacific journal of public health. - : SAGE PUBLICATIONS INC. - 1010-5395 .- 1941-2479. ; 29:5 Suppl., s. 25S-34S
-
Tidskriftsartikel (refereegranskat)abstract
- This study aimed to explore the association of demographic and socioeconomic characteristics and imbalanced sex ratio at birth (SRB) in Chi Linh district, Hai Duong. The data were collected from a longitudinal study using a community-based periodic, referred as Chi Linh Health and Demographic Surveillance System (CHILILAB HDSS) during 2004 to 2013. A total of 7568 children were analyzed. Results showed that SRB in Chi Linh dramatically increased to the imbalanced sex ratio (114.6 boys to 100 girls) by 2013. SRB was associated with birth order and sex of preceding siblings. SRB was extremely high among families without any sons (136/100). SRB was highest among families having third or more children (175/100). Imbalanced SRB was more likely to occur among women working in small business/homemakers and others, women who attained high education level, and women in wealthy households. We suggested further efforts to tackle imbalanced SRB in periurban areas in Vietnam.
|
|
| 15. |
- Liu, Bin, et al.
(författare)
-
Pool boiling heat transfer of N-pentane on micro/nanostructured surfaces
- 2018
-
Ingår i: International Journal of Thermal Sciences. - : Elsevier BV. - 1290-0729. ; 130, s. 386-394
-
Tidskriftsartikel (refereegranskat)abstract
- In the present study, one type of uniformly nanostructured surface (NPDS) was modified by electrophoretic deposition. Two kinds of micro/nanostructured surfaces (FLS1 and FLS2) were fabricated on copper surfaces by femtosecond laser processing. The micro/nanostructured surfaces were further modified by electrophoretic deposition. Afterwards, composite micro/nanostructured surfaces (CS1 and CS2) were developed. Saturated pool boiling heat transfer of the modified surfaces was investigated experimentally. An organic fluid, n-pentane was chosen as the working liquid. Heat transfer coefficient and critical heat flux (CHF) of smooth and micro/nanostructured surfaces were studied. The results showed that the heat transfer coefficient (HTC) of all structured surfaces increased obviously with a notable decrease of wall superheat at CHF compared to the smooth surface, which was attributed to increments in nucleation site density and heat transfer area. The CHF of femtosecond laser processed surfaces was also increased compared with the smooth surface due to a much higher liquid spreading ability, while a uniformly nanostructured surface has no augmentation in CHF. Composite micro/nanostructured surfaces show the best heat transfer performance among all tested surfaces, and the critical heat flux and heat transfer coefficient were increased by more than 60% and 300% over the smooth surface, respectively. The liquid spreading ability of n-pentane on the tested surfaces was measured. For the well wetting liquid, the liquid spreading ability of the heated surface, instead of the wettability, is the main factor for CHF enhancement. It is suggested that a surface with multiscale structures can be an efficient way for boiling heat transfer enhancement.
|
|
| 16. |
- Minh, Hoang Van, et al.
(författare)
-
Tobacco Control Policies in Vietnam : Review on MPOWER Implementation Progress and Challenges
- 2016
-
Ingår i: Asian Pacific Journal of Cancer Prevention. - 1513-7368. ; 17, s. 1-9
-
Tidskriftsartikel (refereegranskat)abstract
- In Vietnam, the WHO Framework Convention on Tobacco Control (WHO FCTC) took effect in March 2005 while MPOWER has been implemented since 2008. This paper describes the progress and challenges of implementation of the MPOWER package in Vietnam. We can report that, in term of monitoring, Vietnam is very active in the Global Tobacco Surveillance System, completing two rounds of the Global Adult Tobacco Survey (GATS) and three rounds of the Global Youth Tobacco Survey (GYTS). To protect people from tobacco smoke, Vietnam has issued and enforced a law requiring comprehensive smoking bans at workplaces and public places since 2013. Tobacco advertising and promotion are also prohibited with the exception of points of sale displays of tobacco products. Violations come in the form of promotion girls, corporate social responsibility activities from tobacco manufacturers and packages displayed by retail vendors. Vietnam is one of the 77 countries that require pictorial health warnings to be printed on cigarette packages to warn about the danger of tobacco and the warnings have been implemented effectively. Cigarette tax is 70% of factory price which is equal to less than 45% of retail price and much lower than the recommendation of WHO. However, Vietnam is one of the very few countries that require manufacturers and importers to make "compulsory contributions" at 1-2% of the factory price of cigarettes sold in Vietnam for the establishment of a Tobacco Control Fund (TCF). The TCF is being operated well. In 2015, 67 units of 63 provinces/cities, 22 ministries and political-social organizations and 6 hospitals received funding from TCF to implement a wide range of tobacco control activities. Cessation services have been starting with a a toll-free quit-line but need to be further strengthened. In conclusion, Vietnam has constantly put efforts into the tobacco control field with high commitment from the government, scientists and activists. Though several remarkable achievements have been gained, many challenges remain. To overcome those challenges, implementation strategies that take into account the contextual factors and social determinants of tobacco use in Vietnam are needed.
|
|
| 17. |
- Nguyen-Tien, Thang, et al.
(författare)
-
Knowledge and practice on prevention of mosquito-borne diseases in livestock-keeping and non-livestock-keeping communities in Hanoi city, Vietnam : A mixed-method study
- 2021
-
Ingår i: PLOS ONE. - : Public Library of Science (PLoS). - 1932-6203. ; 16:2
-
Tidskriftsartikel (refereegranskat)abstract
- Mosquito-borne diseases (MBDs) are causing high morbidity and mortality for humans. Urban livestock keeping is still common in cities around the world. The animals may serve as reservoirs for zoonotic MBDs, which increase the risks for humans. Here we assess the knowledge and practices related to MBDs in households with livestock and without livestock and explore the perceptions of the health care sector about MBDs and livestock keeping in Hanoi city of Vietnam in a cross-sectional study. A quantitative survey was conducted including 513 households with and without livestock-keeping in six districts and complemented with qualitative surveys with four health staff from Hanoi Center of Disease Control and three district health centers. The quantitative survey indicated that the participants possessed basic knowledge on MBDs with an average score of 18.3 out of 35, of which non-livestock-keeping households had a better knowledge than households keeping livestock (p<0.05). Both household categories had low score, 3.5 out of 11, regarding preventive practices against MBDs. The negative binomial model showed that occupation and location of living were factors associated to the knowledge on MBDs. Farmers were likely to have better preventive practices as compared to office workers (p<0.05). Those who had better knowledge also had more adequate preventive practices against MBDs (p<0.001). The qualitative survey revealed that livestock keeping was determined as increasing risks of MBDs due to the increase of mosquito population. It is recommended that community campaigns to raise the awareness and change behavior on MBDs should be organized based on collaboration between the health sector and the veterinary sector for households with and without livestock living in central urban and peri-urban areas. Further studies are needed to confirm the association between urban livestock keeping and potential increasing risks of MBDs such as dengue and Japanese encephalitis.
|
|
| 18. |
|
|
| 19. |
- Pham, Binh Thai, et al.
(författare)
-
A Comparative Study of Soft Computing Models for Prediction of Permeability Coefficient of Soil
- 2021
-
Ingår i: Mathematical problems in engineering (Print). - : Hindawi Limited. - 1024-123X .- 1563-5147.
-
Tidskriftsartikel (refereegranskat)abstract
- Determination of the permeability coefficient (K) of soil is considered as one of the essential steps to assess infiltration, runoff, groundwater, and drainage in the design process of the construction projects. In this study, three cost-effective algorithms, namely, artificial neural network (ANN), support vector machine (SVM), and random forest (RF), which are well-known as advanced machine learning techniques, were used to predict the permeability coefficient (K) of soil (10-9 cm/s), based on a set of simple six input parameters such as natural water content w (%), void ratio (e), specific density (g/cm3), liquid limit (LL) (%), plastic limit (PL) (%), and clay content (%). For this, a total of 84 soil samples data collected from the detailed design stage investigations of Da Nang-Quang Ngai national road project in Vietnam was used to generate training (70%) and testing (30%) datasets for building and validating the models. Statistical error indicators such as RMSE and MAE and correlation coefficient (R) were used to evaluate and compare performance of the models. The results show that all the three models performed well (R > 0.8) for the prediction of permeability coefficient of soil, but the RF model (RMSE = 0.0084, MAE = 0.0049, and R = 0.851) is more efficient compared with the other two models, namely, ANN (RMSE = 0.001, MAE = 0.005, and R = 0.845) and SVM (RMSE = 0.0098, MAE = 0.0064, and R = 0.844). Thus, it can be concluded that the RF model can be used for accurate estimation of the permeability coefficient (K) of the soil.
|
|
| 20. |
- Thi Thanh Ngo, Huong, et al.
(författare)
-
Prediction of Flash Flood Susceptibility of Hilly Terrain Using Deep Neural Network: A Case Study of Vietnam
- 2023
-
Ingår i: CMES - Computer Modeling in Engineering & Sciences. - : Tech Science Press. - 1526-1492 .- 1526-1506. ; 135:3, s. 2219-2241
-
Tidskriftsartikel (refereegranskat)abstract
- Flash floods are one of the most dangerous natural disasters, especially in hilly terrain, causing loss of life, property, and infrastructures and sudden disruption of traffic. These types of floods are mostly associated with landslides and erosion of roads within a short time. Most of Vietnam is hilly and mountainous; thus, the problem due to flash flood is severe and requires systematic studies to correctly identify flood susceptible areas for proper landuse planning and traffic management. In this study, three Machine Learning (ML) methods namely Deep Learning Neural Network (DL), Correlation-based Feature Weighted Naive Bayes (CFWNB), and Adaboost (AB-CFWNB) were used for the development of flash flood susceptibility maps for hilly road section (115 km length) of National Highway (NH)-6 in Hoa Binh province, Vietnam. In the proposed models, 88 past flash flood events were used together with 14 flash floods affecting topographical and geo-environmental factors. The performance of the models was evaluated using standard statistical measures including Receiver Operating Characteristic (ROC) Curve, Area Under Curve (AUC) and Root Mean Square Error (RMSE). The results revealed that all the models performed well (AUC > 0.80) in predicting flash flood susceptibility zones, but the performance of the DL model is the best (AUC: 0.972, RMSE: 0.352). Therefore, the DL model can be applied to develop an accurate flash flood susceptibility map of hilly terrain which can be used for proper planning and designing of the highways and other infrastructure facilities besides landuse management of the area.
|
|
| 21. |
- Thorsted, Anders, et al.
(författare)
-
Model‐based assessment of neutrophil‐mediated phagocytosis and digestion of bacteria across in vitro and in vivo studies
- 2023
-
Ingår i: CPT. - : John Wiley & Sons. - 2163-8306. ; 12:12, s. 1972-1987
-
Tidskriftsartikel (refereegranskat)abstract
- Neutrophil granulocytes are key components of the host response against pathogens, and severe neutropenia, with neutrophil counts below 0.5 × 106 cells/mL, renders patients increasingly vulnerable to infections. Published in vitro (n = 7) and in vivo (n = 5) studies with time-course information on bacterial and neutrophil counts were digitized to characterize the kinetics of neutrophil-mediated bacterial killing and inform on the immune systems' contribution to the clearance of bacterial infections. A mathematical model for the in vitro dynamics of bacteria and the kinetics of neutrophil-mediated phagocytosis and digestion was developed, which was extended to in vivo studies in immune-competent and immune-compromised mice. Neutrophil-mediated bacterial killing was described by two first-order processes—phagocytosis and digestion—scaled by neutrophil concentration, where 50% of the maximum was achieved at neutrophil counts of 1.19 × 106 cells/mL (phagocytosis) and 6.55 × 106 cells/mL (digestion). The process efficiencies diminished as the phagocytosed bacteria to total neutrophils ratio increased (with 50% reduction at a ratio of 3.41). Neutrophil in vivo dynamics were captured through the characterization of myelosuppressive drug effects and postinoculation neutrophil influx into lungs and by system differences (27% bacterial growth and 9.3% maximum capacity, compared with in vitro estimates). Predictions showed how the therapeutically induced reduction of neutrophil counts enabled bacterial growth, especially when falling below 0.5 × 106 cells/mL, whereas control individuals could deal with all tested bacterial burdens (up to 109 colony forming units/g lung). The model-based characterization of neutrophil-mediated bacterial killing simultaneously predicted data across in vitro and in vivo studies and may be used to inform the capacity of host–response at the individual level.
|
|
| 22. |
- Wu, Zan, et al.
(författare)
-
Pool boiling heat transfer of n -pentane and acetone on nanostructured surfaces by electrophoretic deposition
- 2019
-
Ingår i: Proceedings of the Asme International Mechanical Engineering Congress and Exposition, 2018, vol 8b. - : Amer Soc Mechanical Engineers. - 9780791852125
-
Konferensbidrag (refereegranskat)abstract
- This work aims to investigate pool boiling heat transfer enhancement by using nanostructured surfaces. Two types of nanostructured surfaces were employed, gold nanoparticlecoated surfaces and alumina nanoparticle-coated surfaces. The nanostructured surfaces were fabricated by an electrophoretic deposition technique, depositing nanoparticles in a nanofluid onto smooth copper surfaces under an electric field. N -pentane and acetone were tested as working fluids. Compared to the smooth surface, the pool boiling heat transfer coefficient has been increased by 80% for n -pentane and acetone. Possible mechanisms for the enhancement in heat transfer are qualitatively provided. The increase in active nucleation site density due to multiple micro/nanopores on nanoparticle-coated surfaces is likely the main contributor. The critical heat flux on nanostructured surfaces are approximately the same as that on the smooth surface because both smooth and modified surfaces show similar wickability for the two working fluids.
|
|
| 23. |
- Öbrink-Hansen, Kristina, et al.
(författare)
-
Population Pharmacokinetics of Flucloxacillin In Bone and Soft Tissue : Standard Dosing is Not Sufficient to Achieve Therapeutic Concentrations
- 2022
-
Ingår i: Pharmaceutical research. - : Springer Nature. - 0724-8741 .- 1573-904X. ; 39:7, s. 1633-1643
-
Tidskriftsartikel (refereegranskat)abstract
- Flucloxacillin is a β-lactam penicillin commonly used in the treatment of bone and soft tissue infections. In a recent porcine study, we found surprisingly low time for which the free concentration was maintained above the minimal inhibitory concentration (fT>MIC) in bone and soft tissue, following flucloxacillin oral (PO) and intravenous (IV) administration at 1g every 6h (q6h). In addition to plasma, sampling was obtained from subcutaneous tissue, knee joint, cancellous bone and cortical bone, using microdialysis. To identify flucloxacillin dosing regimens that result in theoretically therapeutic concentrations, we developed a population pharmacokinetic (PK) model for the porcine data, and combined it with a human flucloxacillin population PK model for simulations.
|
|
