| 1. |
- Ageron, M., et al.
(författare)
-
Studies of a full-scale mechanical prototype line for the ANTARES neutrino telescope and tests of a prototype instrument for deep-sea acoustic measurements
- 2007
-
Ingår i: Nuclear Instruments and Methods in Physics Research Section A. - : Elsevier. - 0168-9002 .- 1872-9576. ; 581:3, s. 695-708
-
Tidskriftsartikel (refereegranskat)abstract
- full-scale mechanical prototype line was deployed to a depth of 2500 m to test the leak tightness of the electronics containers and the pressure-resistant properties of an electromechanical cable under evaluation for use in the ANTARES deep-sea neutrino telescope. During a month-long immersion study, line parameter data were taken using miniature autonomous data loggers and shore-based optical time domain reflectometry. Details of the mechanical prototype line, the electromechanical cable and data acquisition are presented. Data taken during the immersion study revealed deficiencies in the pressure resistance of the electromechanical cable terminations at the entry points to the electronics containers. The improvements to the termination, which have been integrated into subsequent detection lines, are discussed. The line also allowed deep-sea acoustic measurements with a prototype hydrophone system. The technical setup of this system is described, and the first results of the data analysis are presented. (c) 2007 Elsevier B.V. All rights reserved.
|
|
| 2. |
- Ageron, M., et al.
(författare)
-
The ANTARES optical beacon system
- 2007
-
Ingår i: Nuclear Instruments and Methods in Physics Research Section A. - : Elsevier. - 0168-9002 .- 1872-9576. ; 578:3, s. 498-509
-
Tidskriftsartikel (refereegranskat)abstract
- ANTARES is a neutrino telescope being deployed in the Mediterranean Sea. It consists of a three-dimensional array of photomultiplier tubes that can detect the Cherenkov light induced by charged particles produced in the interactions of neutrinos with the surrounding medium. High angular resolution can be achieved, in particular, when a muon is produced, provided that the Cherenkov photons are detected with sufficient timing precision. Considerations of the intrinsic time uncertainties stemming from the transit time spread in the photomultiplier tubes and the mechanism of transmission of light in sea water lead to the conclusion that a relative time accuracy of the order of 0.5 ns is desirable. Accordingly, different time calibration systems have been developed for the ANTARES telescope. In this article, a system based on Optical Beacons, a set of external and well-controlled pulsed light sources located throughout the detector, is described. This calibration system takes into account the optical properties of sea water, which is used as the detection volume of the ANTARES telescope. The design, tests, construction and first results of the two types of beacons, LED and laser-based, are presented. (C) 2007 Elsevier B.V. All rights reserved.
|
|
| 3. |
|
|
| 4. |
- Aguilar, J. A., et al.
(författare)
-
First results of the instrumentation line for the deep-sea ANTARES neutrino telescope
- 2006
-
Ingår i: Astroparticle physics. - : Elsevier. - 0927-6505 .- 1873-2852. ; 26:4-5, s. 314-324
-
Tidskriftsartikel (refereegranskat)abstract
- In 2005, the ANTARES Collaboration deployed and operated at a depth of 2500 m a so-called Mini Instrumentation Line equipped with Optical Modules (MILOM) at the ANTARES site. The various data acquired during the continuous operation from April to December 2005 of the MILOM confirm the satisfactory performance of the Optical Modules, their front-end electronics and readout system. as well as the calibration devices of the detector. The in situ measurement of the Optical Module time response yields a resolution better than 0.5 ns. The performance of the acoustic positioning system, which enables the spatial reconstruction of the ANTARES detector with a precision of about 10 cm, is verified. These results demonstrate that with the full ANTARES neutrino telescope the design angular resolution of better than 0.3 degrees can be realistically achieved.
|
|
| 5. |
- Aguilar, J. A., et al.
(författare)
-
The data acquisition system for the ANTARES neutrino telescope
- 2007
-
Ingår i: Nuclear Instruments and Methods in Physics Research Section A. - : Elsevier. - 0168-9002 .- 1872-9576. ; 570:1, s. 107-116
-
Tidskriftsartikel (refereegranskat)abstract
- The ANTARES neutrino telescope is being constructed in the Mediterranean Sea. It consists of a large three-dimensional array of photo-multiplier tubes. The data acquisition system of the detector takes care of the digitisation of the photo-multiplier tube signals, data transport, data filtering, and data storage. The detector is operated using a control program interfaced with all elements. The design and the implementation of the data acquisition system are described. (c) 2006 Elsevier B.V. All rights reserved.
|
|
| 6. |
- Aguilar, J A, et al.
(författare)
-
Study of large hemispherical photomultiplier tubes for the ANTARES neutrino telescope
- 2005
-
Ingår i: Nuclear Instruments and Methods in Physics Research Section A. - : Elsevier. - 0168-9002 .- 1872-9576. ; 555:1-2, s. 132-141
-
Tidskriftsartikel (refereegranskat)abstract
- The ANTARES neutrino telescope, to be immersed depth in the Mediterranean Sea, will consist of a three-dimensional matrix of 900 large area photomultiplier tubes housed in pressure-resistant glass spheres. The selection of the optimal photomultiplier was a critical step for the project and required an intensive phase of tests and developments carried out in close collaboration with the main manufacturers worldwide. This paper provides an overview of the tests performed by the collaboration and describes in detail the features of the photomultiplier tube chosen for ANTARES. (c) 2005 Elsevier B.V. All rights reserved.
|
|
| 7. |
- Aguilar, J A, et al.
(författare)
-
Transmission of light in deep sea water at the site of the ANTARES neutrino telescope
- 2005
-
Ingår i: Astroparticle physics. - : Elsevier. - 0927-6505 .- 1873-2852. ; 23:1, s. 131-155
-
Tidskriftsartikel (refereegranskat)abstract
- The ANTARES neutrino telescope is a large photomultiplier array designed to detect neutrino-induced upward-going muons by their Cherenkov radiation. Understanding the absorption and scattering of light in the deep Mediterranean is fundamental to optimising the design and performance of the detector. This paper presents measurements of blue and UV light transmission at the ANTARES site taken between 1997 and 2000. The derived values for the scattering length and the angular distribution of particulate scattering were found to be highly correlated, and results are therefore presented in terms of an absorption length;,ab, and an effective scattering length lambda(sct)(eff). The values for blue (UV) light are found to be lambda(abs) similar or equal to 60(26) m, lambda(sct)(eff similar or equal to) 265(122) m, with significant (similar to15%) time variability. Finally, the results of ANTARES simulations showing the effect of these water properties on the anticipated performance of the detector are presented. (C) 2004 Elsevier B.V. All rights reserved.
|
|
| 8. |
- Golosio, B., et al.
(författare)
-
The FIRST experiment for nuclear fragmentation measurements at GSI
- 2011
-
Ingår i: Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC), 2011 IEEE. ; , s. 2277-2280
-
Konferensbidrag (refereegranskat)abstract
- Nuclear fragmentation processes are relevant in different fields of physics concerning both basic research and applications. FIRST (Fragmentation of Ions Relevant for Space and Therapy) is an experiment aimed at the measurement of double differential cross sections (DDCS), with respect to kinetic energy and scattering polar angle, of nuclear fragmentation processes relevant for hadron therapy and for space radiation protection applications, in the energy range between 100 and 1000 MeV/u. The experiment was mounted at the GSI laboratories of Darmstadt, in Germany. A first data taking was performed in August 2011, using 400 MeV/u 12C on carbon and gold targets. In this work we present a description of the experimental apparatus and some figures from the data acquisition and from the preliminary work on data analysis
|
|
| 9. |
- Pleskac, R., et al.
(författare)
-
The FIRST experiment at GSI
- 2012
-
Ingår i: Nuclear Instruments and Methods in Physics Research Section A. - : Elsevier BV. - 0168-9002 .- 1872-9576. ; 678, s. 130-138
-
Tidskriftsartikel (refereegranskat)abstract
- The FIRST (Fragmentation of Ions Relevant for Space and Therapy) experiment at the SIS accelerator of GSl laboratory in Darmstadt has been designed for the measurement of ion fragmentation crosssections at different angles and energies between 100 and 1000 MeV/nucleon. Nuclear fragmentation processes are relevant in several fields of basic research and applied physics and are of particular interest for tumor therapy and for space radiation protection applications. The start of the scientific program of the FIRST experiment was on summer 2011 and was focused on the measurement of 400 MeV/nucleon C-12 beam fragmentation on thin (8 mm) graphite target. The detector is partly based on an already existing setup made of a dipole magnet (ALADiN). a time projection chamber (TP-MUSIC IV), a neutron detector (LAND) and a time of flight scintillator system (TOFWALL). This pre-existing setup has been integrated with newly designed detectors in the Interaction Region, around the carbon target placed in a sample changer. The new detectors are a scintillator Start Counter, a Beam Monitor drift chamber, a silicon Vertex Detector and a Proton Tagger scintillator system optimized for the detection of light fragments emitted at large angles. In this paper we review the experimental setup, then we present the simulation software, the data acquisition system and finally the trigger strategy of the experiment.
|
|
| 10. |
- Rescigno, R., et al.
(författare)
-
Performance of the reconstruction algorithms of the FIRST experiment pixel sensors vertex detector
- 2014
-
Ingår i: Nuclear Instruments and Methods in Physics Research Section A. - : Elsevier BV. - 0168-9002 .- 1872-9576. ; 767, s. 34-40
-
Tidskriftsartikel (refereegranskat)abstract
- Hadrontherapy treatments use charged particles (e.g. protons and carbon ions) to treat tumors. During a therapeutic treatment with carbon ions, the beam undergoes nuclear fragmentation processes giving rise to significant yields of secondary charged particles. An accurate prediction of these production rates is necessary to estimate precisely the dose deposited into the tumours and the surrounding healthy tissues. Nowadays, a limited set of double differential carbon fragmentation cross-section is available. Experimental data are necessary to benchmark Monte Carlo simulations for their use in hadrontherapy. The purpose of the FIRST experiment is to study nuclear fragmentation processes of ions with kinetic energy in the range from 100 to 1000 MeV/u. Tracks are reconstructed using information from a pixel silicon detector based on the CMOS technology. The performances achieved using this device for hadrontherapy purpose are discussed. For each reconstruction step (clustering, tracking and vertexing), different methods are implemented. The algorithm performances and the accuracy on reconstructed observables are evaluated on the basis of simulated and experimental data.
|
|
| 11. |
- Toppi, M., et al.
(författare)
-
Measurement of fragmentation cross sections of C-12 ions on a thin gold target with the FIRST apparatus
- 2016
-
Ingår i: Physical Review C. - 2469-9985 .- 2469-9993. ; 93:6
-
Tidskriftsartikel (refereegranskat)abstract
- A detailed knowledge of the light ions interaction processes with matter is of great interest in basic and applied physics. As an example, particle therapy and space radioprotection require highly accurate fragmentation cross-section measurements to develop shielding materials and estimate acute and late health risks for manned missions in space and for treatment planning in particle therapy. The Fragmentation of Ions Relevant for Space and Therapy experiment at the Helmholtz Center for Heavy Ion research (GSI) was designed and built by an international collaboration from France, Germany, Italy, and Spain for studying the collisions of a C-12 ion beam with thin targets. The collaboration's main purpose is to provide the double-differential cross-section measurement of carbon-ion fragmentation at energies that are relevant for both tumor therapy and space radiation protection applications. Fragmentation cross sections of light ions impinging on a wide range of thin targets are also essential to validate the nuclear models implemented in MC simulations that, in such an energy range, fail to reproduce the data with the required accuracy. This paper presents the single differential carbon-ion fragmentation cross sections on a thin gold target, measured as a function of the fragment angle and kinetic energy in the forward angular region (theta less than or similar to 6 degrees), aiming to provide useful data for the benchmarking of the simulation softwares used in light ions fragmentation applications. The C-12 ions used in the measurement were accelerated at the energy of 400 MeV/nucleon by the SIS (heavy ion synchrotron) GSI facility.
|
|
| 12. |
|
|
| 13. |
- Birken, Sarah A., et al.
(författare)
-
Toward a more comprehensive understanding of organizational influences on implementation: the organization theory for implementation science framework
- 2023
-
Ingår i: FRONTIERS IN HEALTH SERVICES. - : FRONTIERS MEDIA SA. - 2813-0146. ; 3
-
Tidskriftsartikel (refereegranskat)abstract
- IntroductionImplementation is influenced by factors beyond individual clinical settings. Nevertheless, implementation research often focuses on factors related to individual providers and practices, potentially due to limitations of available frameworks. Extant frameworks do not adequately capture the myriad organizational influences on implementation. Organization theories capture diverse organizational influences but remain underused in implementation science. To advance their use among implementation scientists, we distilled 70 constructs from nine organization theories identified in our previous work into theoretical domains in the Organization Theory for Implementation Science (OTIS) framework.MethodsThe process of distilling organization theory constructs into domains involved concept mapping and iterative consensus-building. First, we recruited organization and implementation scientists to participate in an online concept mapping exercise in which they sorted organization theory constructs into domains representing similar theoretical concepts. Multidimensional scaling and hierarchical cluster analyses were used to produce visual representations (clusters) of the relationships among constructs in concept maps. Second, to interpret concept maps, we engaged members of the Cancer Prevention and Control Research Network (CPCRN) OTIS workgroup in consensus-building discussions.ResultsTwenty-four experts participated in concept mapping. Based on resulting construct groupings coherence, OTIS workgroup members selected the 10-cluster solution (from options of 7-13 clusters) and then reorganized clusters in consensus-building discussions to increase coherence. This process yielded six final OTIS domains: organizational characteristics (e.g., size; age); governance and operations (e.g., organizational and social subsystems); tasks and processes (e.g., technology cycles; excess capacity); knowledge and learning (e.g., tacit knowledge; sense making); characteristics of a population of organizations (e.g., isomorphism; selection pressure); and interorganizational relationships (e.g., dominance; interdependence).DiscussionOrganizational influences on implementation are poorly understood, in part due to the limitations of extant frameworks. To improve understanding of organizational influences on implementation, we distilled 70 constructs from nine organization theories into six domains. Applications of the OTIS framework will enhance understanding of organizational influences on implementation, promote theory-driven strategies for organizational change, improve understanding of mechanisms underlying relationships between OTIS constructs and implementation, and allow for framework refinement. Next steps include testing the OTIS framework in implementation research and adapting it for use among policymakers and practitioners.
|
|
| 14. |
|
|
| 15. |
- Stack, K. M., et al.
(författare)
-
Sedimentology and Stratigraphy of the Shenandoah Formation, Western Fan, Jezero Crater, Mars
- 2024
-
Ingår i: Journal of Geophysical Research: Planets. - 2169-9097. ; 129:2
-
Tidskriftsartikel (refereegranskat)abstract
- Sedimentary fans are key targets of exploration on Mars because they record the history of surface aqueous activity and habitability. The sedimentary fan extending from the Neretva Vallis breach of Jezero crater's western rim is one of the Mars 2020 Perseverance rover's main exploration targets. Perseverance spent ∼250 sols exploring and collecting seven rock cores from the lower ∼25 m of sedimentary rock exposed within the fan's eastern scarp, a sequence informally named the “Shenandoah” formation. This study describes the sedimentology and stratigraphy of the Shenandoah formation at two areas, “Cape Nukshak” and “Hawksbill Gap,” including a characterization, interpretation, and depositional framework for the facies that comprise it. The five main facies of the Shenandoah formation include: laminated mudstone, laminated sandstone, low-angle cross stratified sandstone, thin-bedded granule sandstone, and thick-bedded granule-pebble sandstone and conglomerate. These facies are organized into three facies associations (FA): FA1, comprised of laminated and soft sediment-deformed sandstone interbedded with broad, unconfined coarser-grained granule and pebbly sandstone intervals; FA2, comprised predominantly of laterally extensive, soft-sediment deformed laminated, sulfate-bearing mudstone with lenses of low-angle cross-stratified and scoured sandstone; and FA3, comprised of dipping planar, thin-bedded sand-gravel couplets. The depositional model favored for the Shenandoah formation involves the transition from a sand-dominated distal alluvial fan setting (FA1) to a stable, widespread saline lake (FA2), followed by the progradation of a river delta system (FA3) into the lake basin. This sequence records the initiation of a relatively long-lived, habitable lacustrine and deltaic environment within Jezero crater.
|
|
