| 1. |
- Arshadi Rastabi, Shahrzad, et al.
(author)
-
Metallurgical investigation of aluminum anode behavior in water-in-salt electrolyte for aqueous aluminum batteries
- 2022
-
In: Journal of Power Sources. - : Elsevier. - 0378-7753 .- 1873-2755. ; 523
-
Journal article (peer-reviewed)abstract
- Although ionic liquid electrolytes (ILs) are environmentally unfriendly, they are the most common electrolyte used in aluminum-ion batteries (AIB). Aqueous electrolytes offer a more sustainable alternative, but problem with oxide passivating barrier on Al surface becomes more profound. Recently, a new sub-class of aqueous electrolytes, water-in-salt (WIS) of (AlCl3·6H2O), has been considered, but experimental validation of the behavior of the Al electrode over cycling is required. This work investigates aluminum/graphitic cells using WIS electrolytes with a mass ratio of salt to water of 4, 8, and 12 and finds that they show similar trends in cycling performance. The degradation observed over cycling has been attributed to the formation of a detrimental solid electrolyte interphase (SEI) layer on the Al surface. It was found that WIS 4 increased Al corrosion, resulting in a slightly higher capacity and longer cycling life. Metallurgical observation showed that the Al matrix has a tendency to initiate corrosion around Al3Fe intermetallic phases in both WIS and ILs. This implies that the presence of Al3Fe particles allows the electrolyte to break the oxide barrier and access the bulk Al. These results suggests that metallurgical treatments are important to enhance the electrochemical performance of AIB.
|
|
| 2. |
- Arshadi Rastabi, Shahrzad, et al.
(author)
-
Porous NiMoO4-NrGO as a Battery-Like Electrode Material for Aqueous Hybrid Supercapacitors
- 2023
-
In: Journal of Composites Science. - : MDPI. - 2504-477X. ; 7:6
-
Journal article (peer-reviewed)abstract
- Recently, much research has investigated nanocomposites and their properties for the development of energy storage systems. Supercapacitor performance is usually enhanced by the use of porous electrode structures, which produce a larger surface area for reaction. In this work, a biocompatible polymer of starch medium was used to create the porous nanostructure. Two powders, i.e., Nickel molybdate/reduced graphene oxide (NiMoO4-rGO) and Nickel molybdate/nitrogen-doped reduced graphene oxide (NiMoO4-NrGO), were synthesized using the deposition method in a medium containing starch, nickel nitrate salts, sodium molybdate, and graphene oxide powder. In terms of electrochemical performance, the NiMoO4-NrGO electrode displayed a higher specific capacitance, i.e., 932 Fg−1 (466 Cg−1), than the NiMoO4-rGO electrode, i.e., 884 Fg−1 (442 Cg−1), at a current density of 1 Ag−1. In fact, graphene oxide sheets could lose more oxygen groups in the presence of ammonia, resulting in increased electrical conductivity. For the asymmetric supercapacitor of NiMoO4-NrGO//AC, the specific capacitance at 1 Ag−1, energy density, and power density were 101.2 Fg−1 (111.32 Cg−1), 17 Wh kg−1, and 174.4 kW kg−1, respectively. In addition, this supercapacitor material displayed a good cycling stability of over 82%.
|
|
| 3. |
- Rastabi, Shahrzad Arshadi, et al.
(author)
-
Synthesis of a NiMoO4/3D-rGO nanocomposite via starch medium precipitation method for supercapacitor performance
- 2020
-
In: Batteries. - : MDPI AG. - 2313-0105. ; 6:1
-
Journal article (peer-reviewed)abstract
- This paper presents research on the synergistic effects of nickel molybdate and reduced graphene oxide as a nanocomposite for further development of energy storage systems. An enhancement in the electrochemical performance of supercapacitor electrodes occurs by synthesizing highly porous structures and achieving more surface area. In this work, a chemical precipitation technique was used to synthesize the NiMoO4/3D-rGO nanocomposite in a starch media. Starch was used to develop the porosities of the nanostructure. A temperature of 350◦C was applied to transform graphene oxide sheets to reduced graphene oxide and remove the starch to obtain the NiMoO4/3D-rGO nanocomposite with porous structure. The X-ray diffraction pattern of the NiMoO4 nano particles indicated a monoclinic structure. Also, the scanning electron microscope observation showed that the NiMoO4 NPs were dispersed across the rGO sheets. The electrochemical results of the NiMoO4/3D-rGO electrode revealed that the incorporation of rGO sheets with NiMoO4 NPs increased the capacity of the nanocomposite. Therefore, a significant increase in the specific capacity of the electrode was observed with the NiMoO4/3D-rGO nanocomposite (450 Cg−1 or 900 Fg−1) when compared with bare NiMoO4 nanoparticles (350 Cg−1 or 700 Fg−1) at the current density of 1 A g−1. Our findings show that the incorporation of rGO and NiMoO4 NP redox reactions with a porous structure can benefit the future development of supercapacitors.
|
|
| 4. |
- Rastabi, Shahrzad Arshadi, et al.
(author)
-
Synthesis of NiMoO4/3D-rGO Nanocomposite in Alkaline Environments for Supercapacitor Electrodes
- 2019
-
In: Crystals. - : MDPI AG. - 2073-4352. ; 9:1
-
Journal article (peer-reviewed)abstract
- Although Graphene oxide (GO)-based materials is known as a favorable candidate for supercapacitors, its conductivity needs to be increased. Therefore, this study aimed to investigate the performance of GO-based supercapicitor with new methods. In this work, an ammonia solution has been used to remove the oxygen functional groups of GO. In addition, a facile precipitation method was performed to synthesis a NiMoO4/3D-rGO electrode with purpose of using synergistic effects of rGO conductivity properties as well as NiMoO4 pseudocapacitive behavior. The phase structure, chemical bands and morphology of the synthesized powders were investigated by X-ray diffraction (XRD), Raman spectroscopy, and field emission secondary electron microscopy (FE-SEM). The electrochemical results showed that the NiMoO4/3D-rGO(II) electrode, where ammonia has been used during the synthesis, has a capacitive performance of 932 Fg(-1). This is higher capacitance than NiMoO4/3D-rGO(I) without using ammonia. Furthermore, the NiMoO4/3D-rGO(II) electrode exhibited a power density of up to 17.5 kW kg(-1) and an energy density of 32.36 Wh kg(-1). These results showed that ammonia addition has increased the conductivity of rGO sheets, and thus it can be suggested as a new technique to improve the capacitance.
|
|
| 5. |
- Rastabi, Shahrzad Arshadi, et al.
(author)
-
Treatment of NiMoO4/nanographite nanocomposite electrodes using flexible graphite substrate for aqueous hybrid supercapacitors
- 2021
-
In: PLOS ONE. - : Public Library of Science (PLoS). - 1932-6203. ; 16:7
-
Journal article (peer-reviewed)abstract
- The cycling performance of supercapacitors sometimes becomes limited when electrode materials slough off during frequent charge-discharge cycles, due to weak bonding between the active material and the current collector. In this work, a flexible graphite foil substrate was successfully used as the current collector for supercapacitor electrodes. Graphite foil substrates were treated in different ways with different acid concentrations and temperatures before being coated with an active material (NiMoO4/nanographite). The electrode treated with HNO3 (65%) and H2SO4 (95%) in a 1:1 ratio at 24 degrees C gave better electrochemical performance than did electrodes treated in other ways. This electrode had capacitances of 441 and 184 Fg(-1) at current densities of 0.5 and 10 Ag-1, respectively, with a good rate capability over the current densities of the other treated electrodes. SEM observation of the electrodes revealed that NiMoO4 with a morphology of nanorods 100-120 nm long was properly accommodated on the graphite surface during the charge-discharge process. It also showed that treatment with high-concentration acid created an appropriately porous and rough surface on the graphite, enhancing the adhesion of NiMoO4/nanographite and boosting the electrochemical performance.
|
|
| 6. |
- Razaz, Ghadir, et al.
(author)
-
Aluminum Alloy Anode with Various Iron Content Influencing the Performance of Aluminum-Ion Batteries
- 2023
-
In: Materials. - : MDPI AG. - 1996-1944. ; 16:3
-
Journal article (peer-reviewed)abstract
- Considerable research has been devoted to the development of cathode materials for Al-ion batteries, but challenges remain regarding the behavior of aluminum anodes. Inert oxide (Al2O3) film on Al surfaces presents a barrier to electrochemical activity. The structure of the oxide film needs to be weakened to facilitate ion transfer during electrochemical activity. This study addresses oxide film challenges by studying Al alloy anodes with different iron content. The results reveal that using an anode of 99% Al 1% Fe in a cell increases the cycling lifetime by 48%, compared to a 99.99% Al anode. The improvement observed with the 99% Al 1% Fe anode is attributed to its fractional surface area corrosion being about 12% larger than that of a 99.99% Al anode. This is coupled to precipitation of a higher number of Al3Fe particles, which are evenly scattered in the Al matrix of 99% Al 1% Fe. These Al3Fe particles constitute weak spots in the oxide film for the electrolyte to attack, and access to fresh Al. The addition of iron to an Al anode thus offers a cheap and easy route for targeting the oxide passivating film challenge in Al-ion batteries.
|
|
| 7. |
- Zhang, Renyun, et al.
(author)
-
Triboelectric biometric signature
- 2022
-
In: Nano Energy. - : Elsevier BV. - 2211-2855 .- 2211-3282. ; 100
-
Journal article (peer-reviewed)abstract
- Biometric signatures based on either the physiological or behavioural features of a person have been widely used for identification and authentication. However, few strategies have been developed that combine the two types of features in one signature. Here, we report a type of biometric signature based on the triboelectricity of the human body (TEHB) that combines these two types of features. This triboelectric biometric signature (TEBS) can be accomplished by anyone regardless of the physical condition, as it can be performed by many parts of the body. Different TEBS can be identified using a convolutional neural network (CNN) model with a test accuracy of up to 1.0. The TEBS has been further used for text encryption and decryption with a high sensitivity to changes. Moreover, a dual signed digital signature for enhanced security has been proposed. Our findings provide a new type of TEBS that can be generally used and demonstrated in applications.
|
|
