1. |
|
|
2. |
- Murari, A., et al.
(författare)
-
A control oriented strategy of disruption prediction to avoid the configuration collapse of tokamak reactors
- 2024
-
Ingår i: Nature Communications. - 2041-1723 .- 2041-1723. ; 15:1
-
Tidskriftsartikel (refereegranskat)abstract
- The objective of thermonuclear fusion consists of producing electricity from the coalescence of light nuclei in high temperature plasmas. The most promising route to fusion envisages the confinement of such plasmas with magnetic fields, whose most studied configuration is the tokamak. Disruptions are catastrophic collapses affecting all tokamak devices and one of the main potential showstoppers on the route to a commercial reactor. In this work we report how, deploying innovative analysis methods on thousands of JET experiments covering the isotopic compositions from hydrogen to full tritium and including the major D-T campaign, the nature of the various forms of collapse is investigated in all phases of the discharges. An original approach to proximity detection has been developed, which allows determining both the probability of and the time interval remaining before an incoming disruption, with adaptive, from scratch, real time compatible techniques. The results indicate that physics based prediction and control tools can be developed, to deploy realistic strategies of disruption avoidance and prevention, meeting the requirements of the next generation of devices.
|
|
3. |
- Joffrin, E., et al.
(författare)
-
Overview of the JET preparation for deuterium-tritium operation with the ITER like-wall
- 2019
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 59:11
-
Forskningsöversikt (refereegranskat)abstract
- For the past several years, the JET scientific programme (Pamela et al 2007 Fusion Eng. Des. 82 590) has been engaged in a multi-campaign effort, including experiments in D, H and T, leading up to 2020 and the first experiments with 50%/50% D-T mixtures since 1997 and the first ever D-T plasmas with the ITER mix of plasma-facing component materials. For this purpose, a concerted physics and technology programme was launched with a view to prepare the D-T campaign (DTE2). This paper addresses the key elements developed by the JET programme directly contributing to the D-T preparation. This intense preparation includes the review of the physics basis for the D-T operational scenarios, including the fusion power predictions through first principle and integrated modelling, and the impact of isotopes in the operation and physics of D-T plasmas (thermal and particle transport, high confinement mode (H-mode) access, Be and W erosion, fuel recovery, etc). This effort also requires improving several aspects of plasma operation for DTE2, such as real time control schemes, heat load control, disruption avoidance and a mitigation system (including the installation of a new shattered pellet injector), novel ion cyclotron resonance heating schemes (such as the three-ions scheme), new diagnostics (neutron camera and spectrometer, active Alfven eigenmode antennas, neutral gauges, radiation hard imaging systems...) and the calibration of the JET neutron diagnostics at 14 MeV for accurate fusion power measurement. The active preparation of JET for the 2020 D-T campaign provides an incomparable source of information and a basis for the future D-T operation of ITER, and it is also foreseen that a large number of key physics issues will be addressed in support of burning plasmas.
|
|
4. |
|
|
5. |
|
|
6. |
|
|
7. |
|
|
8. |
- Dork, T, et al.
(författare)
-
Two truncating variants in FANCC and breast cancer risk
- 2019
-
Ingår i: Scientific reports. - : Springer Science and Business Media LLC. - 2045-2322. ; 9:1, s. 12524-
-
Tidskriftsartikel (refereegranskat)abstract
- Fanconi anemia (FA) is a genetically heterogeneous disorder with 22 disease-causing genes reported to date. In some FA genes, monoallelic mutations have been found to be associated with breast cancer risk, while the risk associations of others remain unknown. The gene for FA type C, FANCC, has been proposed as a breast cancer susceptibility gene based on epidemiological and sequencing studies. We used the Oncoarray project to genotype two truncating FANCC variants (p.R185X and p.R548X) in 64,760 breast cancer cases and 49,793 controls of European descent. FANCC mutations were observed in 25 cases (14 with p.R185X, 11 with p.R548X) and 26 controls (18 with p.R185X, 8 with p.R548X). There was no evidence of an association with the risk of breast cancer, neither overall (odds ratio 0.77, 95%CI 0.44–1.33, p = 0.4) nor by histology, hormone receptor status, age or family history. We conclude that the breast cancer risk association of these two FANCC variants, if any, is much smaller than for BRCA1, BRCA2 or PALB2 mutations. If this applies to all truncating variants in FANCC it would suggest there are differences between FA genes in their roles on breast cancer risk and demonstrates the merit of large consortia for clarifying risk associations of rare variants.
|
|
9. |
|
|
10. |
- Nocente, M., et al.
(författare)
-
Generation and observation of fast deuterium ions and fusion-born alpha particles in JET D-He-3 plasmas with the 3-ion radio-frequency heating scenario
- 2020
-
Ingår i: Nuclear Fusion. - : IOP PUBLISHING LTD. - 0029-5515 .- 1741-4326. ; 60:12
-
Tidskriftsartikel (refereegranskat)abstract
- Dedicated experiments to generate energetic D ions and D-(3) He fusion-born alpha particles were performed at the Joint European Torus (JET) with the ITER-like wall (ILW). Using the 3-ion D-(D-NBI)-(3) He radio frequency (RF) heating scenario, deuterium ions from neutral beam injection (NBI) were accelerated in the core of mixed D-(3) He plasmas to higher energies with ion cyclotron resonance frequency (ICRF) waves, in turn leading to a core-localized source of alpha particles. The fast-ion distribution of RF-accelerated D-NBI ions was controlled by varying the ICRF and NBI power (P-ICRF approximate to 4-6 MW, P-NBI approximate to 3-20 MW), resulting in rather high D-D neutron (approximate to 1x10(16) s(-1)) and D-(3) He alpha rates (approximate to 2x10(16) s(-1)) at moderate input heating power. Theory and TRANSP analysis shows that large populations of co-passing MeV-range D ions were generated using the D-(D-NBI)-(3) He 3-ion ICRF scenario. This important result is corroborated by several experimental observations, in particular gamma-ray measurements. The developed experimental scenario at JET provides unique conditions for probing several aspects of future burning plasmas, such as the contribution from MeV range ions to global confinement, but without introducing tritium. Dominant fast-ion core electron heating with T-i approximate to T-e and a rich variety of fast-ion driven Alfven eigenmodes (AEs) were observed in these D-(3) He plasmas. The observed AE activities do not have a detrimental effect on the thermal confinement and, in some cases, may be driven by the fusion born alpha particles. A strong continuous increase in neutron rate was observed during long-period sawteeth (>1 s), accompanied by the observation of reversed shear AEs, which implies that a non monotonic q profile was systematically developed in these plasmas, sustained by the large fast-ion populations generated by the 3-ion ICRF scenario.
|
|
11. |
- Oji, U.K., et al.
(författare)
-
Implementation of time of flight polarized neutron imaging at IMAT-ISIS
- 2023
-
Ingår i: Materials & design. - : Elsevier. - 0264-1275 .- 1873-4197. ; 235
-
Tidskriftsartikel (refereegranskat)abstract
- In this study, we report the first case of design and implementation of a polarized neutron imaging option on the Imaging and Materials Science & Engineering Station (IMAT). This is a significant addition to the capabilities of the station that allows the characterization of advanced magnetic materials for different engineering applications. Combining its time-of-flight feature with a polarized beam yields data that facilitate both quantitative and qualitative analysis of magnetic materials. Using the simple field of an aluminium solenoid, we perform a characterization of the new setup. In addition, we present polarized measurements of additively manufactured (AM) MnAl samples where the magnetic anisotropy due to the fabrication process has been investigated as a first scientific application of the setup. The results indicate that the anisotropy of the material can be engineered through variation of the AM fabrication parameters.
|
|
12. |
- Sahlberg, A. L., et al.
(författare)
-
Pressure measurement in combusting and non-combusting gases using laser-induced grating spectroscopy
- 2019
-
Ingår i: Applied Physics B: Lasers and Optics. - : Springer Science and Business Media LLC. - 0946-2171. ; 125:3
-
Tidskriftsartikel (refereegranskat)abstract
- The measurement of pressure using laser-induced thermal grating spectroscopy, LITGS, with improved accuracy and precision is reported. Pressure values are derived from the record of the time-profile of LITGS signals by fitting of modelled signals to experimental data. The procedure is described for accurate modelling of the LIGS signals involving a sequence of calculation steps with appropriate weighting and calibration to determine the best-fit value of pressure-dependent parameters for averaged and single-shot measurements. Results are reported showing application of this model-fitting method to measurements of pressure in static cells using LITGS generated from NO in mixtures containing N 2 at pressures in the range 0.5–5.0 bar with accuracy of 1–3% and single-shot precision of 4–7%. Time-resolved measurements of pressure, using LITGS signals generated in toluene-seeded fuel vapour, during the compression and expansion strokes of a motored optically accessible engine are reported with pressure-dependent accuracy ranging from better than 10 to around 20% over the cycle and single-shot precision in the range 5–15% over the same range. Measurements in the engine under firing conditions were obtained over a limited range and slightly increased uncertainties associated with varying composition resulting from exhaust gas residuals. The method was found to be of limited utility for measurements in high temperature flames at around ambient pressures.
|
|
13. |
- Andersson, A, et al.
(författare)
-
The Foiling Optimist
- 2017
-
Ingår i: The Proceedings of the 4th International Conference on Innovation in High Performance Sailing Yachts, Lorient, France, 28-30 June 2017.. ; , s. 19-30
-
Konferensbidrag (refereegranskat)
|
|
14. |
- Dahlqvist, Martin, et al.
(författare)
-
Complex magnetism in nanolaminated Mn2GaC
- 2014
-
Annan publikation (övrigt vetenskapligt/konstnärligt)abstract
- We have used first-principles calculations and Heisenberg Monte Carlo simulations to search for the magnetic ground state of Mn2GaC, a recently synthesized magnetic nanolaminate. We have, independent on method, identified a range of low energy collinear as well as non-collinear magnetic configurations, indicating a highly frustrated magnetic material with several nearly degenerate magnetic states. An experimentally obtained magnetization of only 0.29 per Mn atom in Mn2GaC may be explained by canted spins in an antiferromagnetic configuration of ferromagnetically ordered sub-layers with alternating spin orientation, denoted AFM[0001]. Furthermore, low temperature X-ray diffraction show a new basal plane peak appearing upon a magnetic transition, which is consistent with the here predicted change in inter-layer spacing for the AFM[0001] configuration.
|
|
15. |
- Kiptily, V. G., et al.
(författare)
-
Excitation of Alfven eigenmodes by fusion-born alpha-particles in D-He-3 plasmas on JET
- 2022
-
Ingår i: Plasma Physics and Controlled Fusion. - : IOP Publishing Ltd. - 0741-3335 .- 1361-6587. ; 64:6
-
Tidskriftsartikel (refereegranskat)abstract
- Alfven eigenmode (AE) instabilities driven by alpha-particles have been observed in D-He-3 fusion experiments on the Joint European Torus (JET) with the ITER-like wall. For the efficient generation of fusion alpha-particles from D-He-3 fusion reaction, the three-ion radio frequency scenario was used to accelerate the neutral beam injection 100 keV deuterons to higher energies in the core of mixed D-He-3 plasmas at high concentrations of He-3. A large variety of fast-ion driven magnetohydrodynamic modes were observed, including the elliptical Alfven eigenmodes (EAEs) with mode numbers n = -1 and axisymmetric modes with n = 0 in the frequency range of EAEs. The simultaneous observation of these modes indicates the presence of rather strong alpha-particle population in the plasma with a 'bump-on-tail' shaped velocity distribution. Linear stability analysis and Fokker-Planck calculations support the observations. Experimental evidence of the AEs excitation by fusion-born alpha-particles in the D-He-3 plasma is provided by neutron and gamma-ray diagnostics as well as fast-ion loss measurements. We discuss an experimental proposal for the planned full-scale D-T plasma experiments on JET based on the physics insights gained from these experiments.
|
|
16. |
- Nygård, Magnus M., et al.
(författare)
-
Local order in high-entropy alloys and associated deuterides - a total scattering and Reverse Monte Carlo study
- 2020
-
Ingår i: Acta Materialia. - : PERGAMON-ELSEVIER SCIENCE LTD. - 1359-6454 .- 1873-2453. ; 199, s. 504-513
-
Tidskriftsartikel (refereegranskat)abstract
- Many of the materials properties of high-entropy alloys (HEAs), like increased hardness, reduced thermal and electrical conductivity, and interesting hydrogen storage properties, are proposed to be related to local lattice distortions of the crystal structure due to the significant size differences between the elements of the alloy. However, direct evidence of this effect is very limited in the literature, and it therefore remains a hypothesis. This work presents a detailed assessment of the local lattice distortion in three body-centered cubic (bcc) HEAs TiVNb, TiVZrNb and TiVZrNbHf with varying atomic size differences using total scattering measurements and Reverse Monte Carlo structure modelling. The analysis indicates that the amount of local lattice distortion in the alloys increases with the elemental size difference in the alloy. The amount of lattice distortion is relieved when dideuterides with CaF2-type structures (Fm (3) over barm) are formed from the bcc (Im (3) over barm) HEAs. Analyses of the local environments around the deuterium atoms reveal an interesting correlation between the valence-electron concentration (VEC) of the nearest-neighbour metals and the stability of tetrahedral interstices with respect to deuterium occupation. Moreover, there is a tendency towards Ti/Nb short-range order in TiVNbD5.7 where the mixing entropy is lowest. In TiVZrNbHfD10, about 6 % of the deuterium atoms are displaced from the tetrahedral interstices with smaller volumes to octahedral interstices.
|
|
17. |
|
|
18. |
- Cedervall, Johan, et al.
(författare)
-
On the structural and magnetic properties of the double perovskite Nd2NiMnO6Nd2NiMnO6
- 2019
-
Ingår i: Journal of Materials Science: Materials in Electronics. - : Springer Science and Business Media LLC. - 1573-482X .- 0957-4522. ; 30:17, s. 16571-16578
-
Tidskriftsartikel (refereegranskat)abstract
- The structural, electronic and magnetic properties of phase pure and stoichiometric samples of the double perovskite Nd 2NiMnO 6 have been investigated with a combination of X-ray and neutron diffraction, X-ray photoelectron spectroscopy and magnetometry. It is found that the monoclinic space group P2 1/ n best describes the crystal structure of Nd 2NiMnO 6. Photoectron spectroscopy revels a mixed valence of the transition metal sites where Ni has 3+/2+ oxidation states and Mn has 3+/4+. The compound orders ferromagnetically at ∼195 K. The magnetic structure was determined from the refinement of the neutron diffraction data. The results suggests that the B-site magnetic moments align along the crystallographic a-direction.
|
|
19. |
|
|
20. |
- Ericsson, A., et al.
(författare)
-
Crystallization of a Zr-based metallic glass produced by laser powder bed fusion and suction casting
- 2021
-
Ingår i: Journal of Non-Crystalline Solids. - : Elsevier. - 0022-3093 .- 1873-4812. ; 571
-
Tidskriftsartikel (refereegranskat)abstract
- The crystallization behaviour during low temperature annealing of samples of the Zr59.3Cu28.8Al10.4Nb1.5 (at%) bulk metallic glass produced by suction casting and the laser powder bed fusion (LPBF) process were studied with small angle neutron scattering (SANS), X-ray diffraction and scanning electron microscopy. The in-situ SANS measurements during isothermal annealing reveals that the phase separation in the LPBF processed material proceeds at a smaller characteristic length-scale than the cast material. Quantitative analysis of the SANS data shows that, while the crystallization process in both materials proceed through rapid nucleation followed by diffusion limited growth, the LPBF processed material crystallizes with a smaller cluster size and at a higher rate. The smaller cluster size is attributed to the elevated oxygen content in the LPBF processed material which reduces the nucleation barrier and thus the thermal stability.
|
|
21. |
- Ericsson, A., et al.
(författare)
-
Transient nucleation in selective laser melting of Zr-based bulk metallic glass
- 2020
-
Ingår i: Materials & design. - : Elsevier. - 0264-1275 .- 1873-4197. ; 195
-
Tidskriftsartikel (refereegranskat)abstract
- The crystallization rate during selective laser melting (SLM) of bulk metallic glasses (BMG) is a critical factor in maintaining the material's amorphous structure. To increase the understanding of the interplay between the SLM process and the crystallization behavior of BMGs, a numerical model based on the classical nucleation theory has been developed that accounts for the rapid temperature changes associated with SLM. The model is applied to SLM of a Zr-based BMG and it is shown that the transient effects, accounted for by the model, reduce the nucleation rate by up to 15 orders of magnitude below the steady-state nucleation rate on cooling, resulting in less nuclei during the build process. The capability of the proposed modelling approach is demonstrated by comparing the resulting crystalline volume fraction to experimental findings. The agreement between model predictions and the experimental results clearly suggests that transient nucleation effects must be accounted for when considering the crystallization rate during SLM processing of BMGs.
|
|
22. |
- Eriksson, Frida, 1986, et al.
(författare)
-
Interpretative and predictive modelling of Joint European Torus collisionality scans
- 2019
-
Ingår i: Plasma Physics and Controlled Fusion. - : Institute of Physics Publishing (IOPP). - 0741-3335 .- 1361-6587. ; 61:11
-
Tidskriftsartikel (refereegranskat)abstract
- Transport modelling of Joint European Torus (JET) dimensionless collisionality scaling experiments in various operational scenarios is presented. Interpretative simulations at a fixed radial position are combined with predictive JETTO simulations of temperatures and densities, using the TGLF transport model. The model includes electromagnetic effects and collisions as well as (E)over-right-arrow x (b)over-right-arrow shear in Miller geometry. Focus is on particle transport and the role of the neutral beam injection (NBI) particle source for the density peaking. The experimental 3-point collisionality scans include L-mode, and H-mode (D and H and higher beta D plasma) plasmas in a total of 12 discharges. Experimental results presented in (Tala et al 2017 44th EPS Conf.) indicate that for the H-mode scans, the NBI particle source plays an important role for the density peaking, whereas for the L-mode scan, the influence of the particle source is small. In general, both the interpretative and predictive transport simulations support the experimental conclusions on the role of the NBI particle source for the 12 JET discharges.
|
|
23. |
- Garcia, J., et al.
(författare)
-
First principles and integrated modelling achievements towards trustful fusion power predictions for JET and ITER
- 2019
-
Ingår i: Nuclear Fusion. - : Institute of Physics Publishing (IOPP). - 0029-5515 .- 1741-4326. ; 59:8
-
Tidskriftsartikel (refereegranskat)abstract
- Predictability of burning plasmas is a key issue for designing and building credible future fusion devices. In this context, an important effort of physics understanding and guidance is being carried out in parallel to JET experimental campaigns in H and D by performing analyses and modelling towards an improvement of the understanding of DT physics for the optimization of the JET-DT neutron yield and fusion born alpha particle physics. Extrapolations to JET-DT from recent experiments using the maximum power available have been performed including some of the most sophisticated codes and a broad selection of models. There is a general agreement that 11-15 MW of fusion power can be expected in DT for the hybrid and baseline scenarios. On the other hand, in high beta, torque and fast ion fraction conditions, isotope effects could be favourable leading to higher fusion yield. It is shown that alpha particles related physics, such as TAE destabilization or fusion power electron heating, could be studied in ITER relevant JET-DT plasmas.
|
|
24. |
- Hebestreit, H., et al.
(författare)
-
Cardiopulmonary exercise testing provides additional prognostic information in cystic fibrosis
- 2019
-
Ingår i: American Journal of Respiratory and Critical Care Medicine. - 1073-449X. ; 199:8, s. 987-995
-
Tidskriftsartikel (refereegranskat)abstract
- Rationale: The prognostic value of cardiopulmonary exercise testing (CPET) for survival in cystic fibrosis (CF) in the context of current clinical management, when controlling for other known prognostic factors, is unclear. Objectives: To determine the prognostic value of CPET-derived measures beyond peak oxygen uptake (VO 2 peak) following rigorous adjustment for other predictors. Methods: Data from 10 CF centers in Australia, Europe, and North America were collected retrospectively. A total of 510 patients completed a cycle CPET between January 2000 and December 2007, of which 433 fulfilled the criteria for a maximal effort. Time to death/lung transplantation was analyzed using Cox proportional hazards regression. In addition, phenotyping using hierarchical Ward clustering was performed to characterize high-risk subgroups. Measurements and Main Results: Cox regression showed, even after adjustment for sex, FEV1% predicted, body mass index (z-score), age at CPET, Pseudomonas aeruginosa status, and CF-related diabetes as covariates in the model, that VO 2 peak in % predicted (hazard ratio [HR], 0.964; 95% confidence interval [CI], 0.944-0.986), peak work rate (% predicted; HR, 0.969; 95% CI, 0.951-0.988), ventilatory equivalent for oxygen (HR, 1.085; 95% CI, 1.041-1.132), and carbon dioxide (HR, 1.060; 95% CI, 1.007-1.115) (all P < 0.05) were significant predictors of death or lung transplantation at 10-year follow-up. Phenotyping revealed that CPET-derived measures were important for clustering. We identified a high-risk cluster characterized by poor lung function, nutritional status, and exercise capacity. Conclusions: CPET provides additional prognostic information to established predictors of death/lung transplantation in CF. High-risk patients may especially benefit from regular monitoring of exercise capacity and exercise counseling. Copyright © 2019 by the American Thoracic Society.
|
|
25. |
|
|
26. |
|
|
27. |
- Ivanov, Sergey, et al.
(författare)
-
Cation ordering, ferrimagnetism and ferroelectric relaxor behavior in Pb(Fe1-xScx)(2/3)W1/3O3 solid solutions
- 2019
-
Ingår i: European Physical Journal B. - : SPRINGER. - 1434-6028 .- 1434-6036. ; 92:8
-
Tidskriftsartikel (refereegranskat)abstract
- Ceramic samples of the multiferroic perovskite Pb(Fe1-xScx)(2/3)W1/3O3 with 0 <= x <= 0.4 have been synthesized using a conventional solid-state reaction method, and investigated experimentally and theoretically using first-principle calculations. Rietveld analyses of joint synchrotron X-ray and neutron diffraction patterns show the formation of a pure crystalline phase with cubic (Fm3(_)m) structure with partial ordering in the B-sites. The replacement of Fe by Sc leads to the increase of the cation order between the B and B '' sites. As the non-magnetic Sc3+ ions replace the magnetic Fe3+ cations, the antiferromagnetic state of PbFe2/3W1/3O3 is turned into a ferrimagnetic state reflecting the different magnitude of the magnetic moments on the B ' and B '' sites. The materials remain ferroelectric relaxors with increasing Sc content. Results from experiments on annealed and quenched samples show that the cooling rate after high temperature annealing controls the degree of cationic order in Pb(Fe1-xScx)(2/3)W1/3O3 and possibly also in the undoped PbFe2/3W1/3O3.
|
|
28. |
|
|
29. |
- Murari, A., et al.
(författare)
-
Adaptive learning for disruption prediction in non-stationary conditions
- 2019
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 0029-5515 .- 1741-4326. ; 59:8
-
Tidskriftsartikel (refereegranskat)abstract
- For many years, machine learning tools have proved to be very powerful disruption predictors in tokamaks. On the other hand, the vast majority of the techniques deployed assume that the input data is independent and is sampled from exactly the same probability distribution for the training set, the test set and the final real time deployment. This hypothesis is certainly not verified in practice, since the experimental programmes evolve quite rapidly, resulting typically in ageing of the predictors and consequent suboptimal performance. This paper describes various adaptive training strategies that have been tested to maintain the performance of disruption predictors in non-stationary conditions. The proposed approaches have been implemented using new ensembles of classifiers, explicitly developed for the present application. The improvements in performance are unquestionable and, given the difficulties encountered so far in translating predictors from one device to another, the proposed adaptive methods from scratch can therefore be considered a useful option in the arsenal of alternatives envisaged for the next generation of devices, particularly at the very beginning of their operation.
|
|
30. |
- Norrman, AE, et al.
(författare)
-
Salivary Biomarkers and Oral Health in Liver Transplant Recipients, with an Emphasis on Diabetes
- 2021
-
Ingår i: Diagnostics (Basel, Switzerland). - : MDPI AG. - 2075-4418. ; 11:4
-
Tidskriftsartikel (refereegranskat)abstract
- Salivary biomarkers have been linked to various systemic diseases. We examined the association between salivary biomarkers, periodontal health, and microbial burden in liver transplant (LT) recipients with and without diabetes, after transplantation. We hypothesized that diabetic recipients would exhibit impaired parameters. This study included 84 adults who received an LT between 2000 and 2006 in Finland. Dental treatment preceded transplantation. The recipients were re-examined, on average, six years later. We evaluated a battery of salivary biomarkers, microbiota, and subjective oral symptoms. Periodontal health was assessed, and immunosuppressive treatments were recorded. Recipients with impaired periodontal health showed higher matrix metalloproteinase-8 (MMP-8) levels (p < 0.05) and MMP-8/tissue inhibitor of matrix metalloproteinase 1 (TIMP1) ratios (p < 0.001) than recipients with good periodontal health. Diabetes post-LT was associated with impaired periodontal health (p < 0.05). No difference between groups was found in the microbial counts. Salivary biomarker levels did not seem to be affected by diabetes. However, the advanced pro-inflammatory state induced by and associated with periodontal inflammation was reflected in the salivary biomarker levels, especially MMP-8 and the MMP-8/TIMP-1 molar ratio. Thus, these salivary biomarkers may be useful for monitoring the oral inflammatory state and the course of LT recipients.
|
|
31. |
- Pasquini, Luca, et al.
(författare)
-
Magnesium- and intermetallic alloys-based hydrides for energy storage : modelling, synthesis and properties
- 2022
-
Ingår i: Progress in Energy. - : Institute of Physics Publishing (IOPP). - 2516-1083. ; 4:3
-
Forskningsöversikt (refereegranskat)abstract
- Hydrides based on magnesium and intermetallic compounds provide a viable solution to the challenge of energy storage from renewable sources, thanks to their ability to absorb and desorb hydrogen in a reversible way with a proper tuning of pressure and temperature conditions. Therefore, they are expected to play an important role in the clean energy transition and in the deployment of hydrogen as an efficient energy vector. This review, by experts of Task 40 'Energy Storage and Conversion based on Hydrogen' of the Hydrogen Technology Collaboration Programme of the International Energy Agency, reports on the latest activities of the working group 'Magnesium- and Intermetallic alloys-based Hydrides for Energy Storage'. The following topics are covered by the review: multiscale modelling of hydrides and hydrogen sorption mechanisms; synthesis and processing techniques; catalysts for hydrogen sorption in Mg; Mg-based nanostructures and new compounds; hydrides based on intermetallic TiFe alloys, high entropy alloys, Laves phases, and Pd-containing alloys. Finally, an outlook is presented on current worldwide investments and future research directions for hydrogen-based energy storage.
|
|
32. |
- Saarelma, S., et al.
(författare)
-
Self-consistent pedestal prediction for JET-ILW in preparation of the DT campaign
- 2019
-
Ingår i: Physics of fluids. - : American Institute of Physics (AIP). - 1070-6631 .- 1089-7666 .- 1070-664X .- 1089-7674. ; 26:7
-
Tidskriftsartikel (refereegranskat)abstract
- The self-consistent core-pedestal prediction model of a combination of EPED1 type pedestal prediction and a simple stiff core transport model is able to predict Type I ELMy (edge localized mode) pedestals of a large JET-ILW (ITER-like wall) database at the similar accuracy as is obtained when the experimental global plasma beta is used as input. The neutral penetration model [R. J. Groebner et al., Phys. Plasmas 9, 2134 (2002)] with corrections that take into account variations due to gas fueling and plasma triangularity is able to predict the pedestal density with an average error of 15%. The prediction of the pedestal pressure in hydrogen plasma that has higher core heat diffusivity compared to a deuterium plasma with similar heating and fueling agrees with the experiment when the isotope effect on the stability, the increased diffusivity, and outward radial shift of the pedestal are included in the prediction. However, the neutral penetration model that successfully predicts the deuterium pedestal densities fails to predict the isotope effect on the pedestal density in hydrogen plasmas.
|
|
33. |
- Sahlberg, A. L., et al.
(författare)
-
Non-intrusive, in situ detection of ammonia in hot gas flows with mid-infrared degenerate four-wave mixing at 2.3μm
- 2016
-
Ingår i: Journal of Raman Spectroscopy. - : Wiley. - 0377-0486. ; 47:9, s. 1140-1148
-
Tidskriftsartikel (refereegranskat)abstract
- We demonstrate non-intrusive, in situ detection of ammonia (NH3) in reactive hot gas flows at atmospheric pressure using mid-infrared degenerate four-wave mixing (IR-DFWM). IR-DFWM excitation scans were performed in the v2+v3 and v1+v2 vibrational bands of NH3 around 2.3μm for gas flow temperatures of 296, 550 and 820K. Simulations based on spectroscopic parameters from the HITRAN database have been compared with the measurements in order to identify the spectral lines, and an absorption spectrum at 296K has also been measured to compare with the IR-DFWM spectra. The signal-to-noise ratio of the IR-DFWM measurement was found to be higher than that of the absorption measurement. Some spectral lines in the measured IR-DFWM and absorption spectra had no matching lines in the HITRAN simulation. The detection limit of NH3 diluted in N2 with IR-DFWM in this spectral range was estimated at 296, 550 and 820K to be 1.36, 4.87 and 7.06×1016molecules/cm3. The dependence of the NH3 IR-DFWM signal on the quenching properties of the buffer gas flow was investigated by comparing the signals for gas flows of N2, Ar and CO2 with small admixtures of NH3. It was found that the signal dependence on buffer gas was large at room temperature but decreased at elevated temperatures. These results show the potential of IR-DFWM for detection of NH3 in combustion environments.
|
|
34. |
- Sahlberg, Bo, et al.
(författare)
-
Airborne molds and bacteria, microbial volatile organic compounds (MVOC), plasticizers and formaldehyde in dwellings in three North European cities in relation to sick building syndrome (SBS)
- 2013
-
Ingår i: Science of the Total Environment. - : Elsevier BV. - 0048-9697 .- 1879-1026. ; 444, s. 433-440
-
Tidskriftsartikel (refereegranskat)abstract
- There are few studies on associations between airborne microbial exposure, formaldehyde, plasticizers in dwellings and the symptoms compatible with the sick building syndrome (SBS). As a follow-up of the European Community Respiratory Health Survey (ECRHS II), indoor measurements were performed in homes in three North European cities. The aim was to examine whether volatile organic compounds of possible microbial origin (MVOCs), and airborne levels of bacteria, molds, formaldehyde, and two plasticizers in dwellings were associated with the prevalence of SBS, and to study associations between MVOCs and reports on dampness and mold.The study included homes from three centers included in ECRHS II. A total of 159 adults (57% females) participated (19% from Reykjavik, 40% from Uppsala, and 41% from Tartu). A random sample and additional homes with a history of dampness were included. Exposure measurements were performed in the 159 homes of the participants. MVOCs were analyzed by GCMS with selective ion monitoring (SIM). Symptoms were reported in a standardized questionnaire. Associations were analyzed by multiple logistic regression.In total 30.8% reported any SBS (20% mucosal, 10% general, and 8% dermal symptoms) and 41% of the homes had a history of dampness and molds There were positive associations between any SBS and levels of 2-pentanol (P=0.002), 2-hexanone (P=0.0002), 2-pentylfuran (P=0.009), 1-octen-3-ol (P=0.002), formaldehyde (P=0.05), and 2,2,4-trimethyl-1,3-pentanediol monoisobutyrate (Texanol) (P=0.05). 1-octen-3-ol (P=0.009) and 3-methylfuran (P=0.002) were associated with mucosal symptoms. In dwellings with dampness and molds, the levels of total bacteria (P=0.02), total mold (P=0.04), viable mold (P=0.02), 3-methylfuran (P=0.008) and ethyl-isobutyrate (P=0.02) were higher.In conclusion, some MVOCs like 1-octen-3-ol, formaldehyde and the plasticizer Texanol, may be a risk factor for sick building syndrome. Moreover, concentrations of airborne molds, bacteria and some other MVOCs were slightly higher in homes with reported dampness and mold.
|
|
35. |
|
|
36. |
- Valovic, M., et al.
(författare)
-
Control of the hydrogen:deuterium isotope mixture using pellets in JET
- 2019
-
Ingår i: Nuclear Fusion. - : IOP PUBLISHING LTD. - 0029-5515 .- 1741-4326. ; 59:10
-
Tidskriftsartikel (refereegranskat)abstract
- Deuterium pellets are injected into an initially pure hydrogen H-mode plasma in order to control the hydrogen: deuterium (H:D) isotope mixture. The pellets are deposited in the outer 20% of the minor radius, similar to that expected in ITER, creating transiently hollow electron density profiles. A H: D isotope mixture of approximately 45%:55% is obtained in the core with a pellet fuelling throughput of Phi(pel) = 0.045P(aux)/T-e,T-ped similar to previous pellet fuelling experiments in pure deuterium. Evolution of the H: D mix in the core is reproduced using a simple model, although deuterium transport could be higher at the beginning of the pellet train compared with the flat-top phase.
|
|
37. |
- Zlotea, C., et al.
(författare)
-
Hydrogen sorption in TiZrNbHfTa high entropy alloy
- 2019
-
Ingår i: Journal of Alloys and Compounds. - : ELSEVIER SCIENCE SA. - 0925-8388 .- 1873-4669. ; 775, s. 667-674
-
Tidskriftsartikel (refereegranskat)abstract
- High Entropy Alloys (HEA), where five or more elements are mixed together in near equiatomic ratios offer promising properties as hydrogen storage materials due to their ability to crystallize in simple cubic structures in the presence of large lattice strain originating from the different sizes of the atoms. In this work, the hydrogen absorption and desorption as well as the cycling properties of the TiZrNbHfTa HEA have been studied by in situ Synchrotron X-Ray diffraction, Pressure-Composition-Isotherm, Thermal Desorption Spectroscopy and Differential Scanning Calorimetry. The alloy crystallizes in a cubic bcc phase and undergoes a two-stage hydrogen absorption reaction to a fcc dihydride phase with an intermediate tetragonal monohydride, very similar to the V-H system. The hydrogen absorption/desorption in TiZrNbHfTa is completely reversible and the activation energy of desorption could be calculated. Furthermore, we have observed an interesting macrostructure following parallel planes after the formation of the dihydride phase, which is retained after desorption.
|
|