| 1. |
- Salami, B., et al.
(författare)
-
LEGaTO: Low-Energy, Secure, and Resilient Toolset for Heterogeneous Computing
- 2020
-
Ingår i: PROCEEDINGS OF THE 2020 DESIGN, AUTOMATION & TEST IN EUROPE CONFERENCE & EXHIBITION (DATE 2020). - 1530-1591. - 9783981926347 ; , s. 169-174
-
Konferensbidrag (refereegranskat)abstract
- The LEGaTO project leverages task-based programming models to provide a software ecosystem for Made in-Europe heterogeneous hardware composed of CPUs, GPUs, FPGAs and dataflow engines. The aim is to attain one order of magnitude energy savings from the edge to the converged cloud/HPC, balanced with the security and resilience challenges. LEGaTO is an ongoing three-year EU H2020 project started in December 2017.
|
|
| 2. |
|
|
| 3. |
|
|
| 4. |
- Meisgen, S, et al.
(författare)
-
Auxilin is a novel susceptibility gene for congenital heart block which directly impacts fetal heart function
- 2022
-
Ingår i: Annals of the rheumatic diseases. - : BMJ. - 1468-2060 .- 0003-4967. ; 81:8, s. 1151-1161
-
Tidskriftsartikel (refereegranskat)abstract
- Neonatal lupus erythematosus (NLE) may develop after transplacental transfer of maternal autoantibodies with cardiac manifestations (congenital heart block, CHB) including atrioventricular block, atrial and ventricular arrhythmias, and cardiomyopathies. The association with anti-Ro/SSA antibodies is well established, but a recurrence rate of only 12%–16% despite persisting maternal autoantibodies suggests that additional factors are required for CHB development. Here, we identify fetal genetic variants conferring risk of CHB and elucidate their effects on cardiac function.MethodsA genome-wide association study was performed in families with at least one case of CHB. Gene expression was analysed by microarrays, RNA sequencing and PCR and protein expression by western blot, immunohistochemistry, immunofluorescence and flow cytometry. Calcium regulation and connectivity were analysed in primary cardiomyocytes and cells induced from pleuripotent stem cells. Fetal heart performance was analysed by Doppler/echocardiography.ResultsWe identified DNAJC6 as a novel fetal susceptibility gene, with decreased cardiac expression of DNAJC6 associated with the disease risk genotype. We further demonstrate that fetal cardiomyocytes deficient in auxilin, the protein encoded by DNAJC6, have abnormal connectivity and Ca2+ homoeostasis in culture, as well as decreased cell surface expression of the Cav1.3 calcium channel. Doppler echocardiography of auxilin-deficient fetal mice revealed cardiac NLE abnormalities in utero, including abnormal heart rhythm with atrial and ventricular ectopias, as well as a prolonged atrioventricular time intervals.ConclusionsOur study identifies auxilin as the first genetic susceptibility factor in NLE modulating cardiac function, opening new avenues for the development of screening and therapeutic strategies in CHB.
|
|
| 5. |
- Mellström, Dan, 1945, et al.
(författare)
-
Proportion and Characteristics of Patients in Sweden Remaining at High Risk of Fracture Despite Prior Treatment
- 2016
-
Ingår i: Clinical Therapeutics. - : Elsevier BV. - 0149-2918. ; 38:7, s. 1686-1695
-
Tidskriftsartikel (refereegranskat)abstract
- Purpose: Fragility fractures axe a clinical consequence of osteoporosis (OP). Evidence suggests however, current OP treatments may be inadequate in reducing fracture risk. The purpose of this study was to estimate the proportion and characteristics of Swedish patients who remain at high risk of fracture after 2 years of treatment, as evidenced by osteoporotic bone mineral density (BMD), a decrease in BMD, or the occurrence of new fractures. Methods: This was a retrospective, descriptive analysis of a subset of participants obtained from a Swedish osteoporosis patient registry from 1991 to 2009. Patients were required to be osteoporotic, to be treatment naive at baseline, to have returned for at least 1 follow-up visit, and to have reported osteoporosis treatment use for >= 2 years after the baseline visit with a BMD T score. Two overlapping cohorts remaining at high risk of fracture were defined using the BMD T score measured after 2 years of treatment from baseline. The osteoporosis cohort comprised patients who remained osteoporotic, whereas the BMD decrease cohort included patients whose total hip or lumbar spine T score decreased by >= 3%. Findings: A total of 3292 osteoporotic patients were identified in the registry, of whom 392 met the study inclusion criteria. The mean (SD) patient age was 68.3 (8.5) years, with most patients being female (92.3%). Among all patients, 297 (75.8%) remained osteoporotic after at least 2 years of treatment, 90 (23.0%) experienced a BMD decrease of >= 3%, and 23 (5.9%) reported an incident fracture between the baseline and first follow-up visit. More than three-quarters (76.8%) of all patients reported taking bisphosphonates, whereas only 72.4% and 47.8% reported this in the osteoporosis and BMD decrease cohorts, respectively. Raloxifene was the only nonbisphosphonate used, with 24.2% of all patients reportedly taking it. Implications: This study highlighted that despite 2 years of osteoporosis treatment, a high percentage of patients remain at high risk of fracture. There is a need for improved treatment strategies that reduce fracture risk and improve patient outcomes in the real-world setting.
|
|
| 6. |
|
|
| 7. |
|
|
| 8. |
|
|
| 9. |
|
|
| 10. |
- Kaiser, M., et al.
(författare)
-
VEDLIoT: Very Efficient Deep Learning in IoT
- 2022
-
Ingår i: Proceedings of the 2022 Design, Automation and Test in Europe Conference and Exhibition, DATE 2022. - : IEEE. - 9783981926361
-
Konferensbidrag (refereegranskat)abstract
- The VEDLIoT project targets the development of energy-efficient Deep Learning for distributed AIoT applications. A holistic approach is used to optimize algorithms while also dealing with safety and security challenges. The approach is based on a modular and scalable cognitive IoT hardware platform. Using modular microserver technology enables the user to configure the hardware to satisfy a wide range of applications. VEDLIoT offers a complete design flow for Next-Generation IoT devices required for collaboratively solving complex Deep Learning applications across distributed systems. The methods are tested on various use-cases ranging from Smart Home to Automotive and Industrial IoT appliances. VEDLIoT is an H2020 EU project which started in November 2020. It is currently in an intermediate stage with the first results available.
|
|
| 11. |
- Kasvayee, Keivan Amiri, 1986-, et al.
(författare)
-
Strain localization and crack formation effects on stress-strain response of ductile iron
- 2017
-
Ingår i: Materials Science & Engineering. - : Elsevier. - 0921-5093 .- 1873-4936. ; 702, s. 265-271
-
Tidskriftsartikel (refereegranskat)abstract
- The strain localization and crack formation in ferritic-pearlitic ductile iron under tension was investigated by in-situ tensile tests. In-situ tensile tests under optical microscope were performed and the onset of the early ferrite-graphite decohesions and micro-cracks inside the matrix were studied. The results revealed that early ferrite-graphite decohesion and micro-cracks inside the ferrite were formed at the stress range of 280–330 MPa, where a kink occurred in the stress-strain response, suggesting the dissipation of energy in both plastic deformation and crack initiation. Some micro-cracks initiated and propagated inside the ferrite but were arrested within the ferrite zone before propagating in the pearlite. Digital Image Correlation (DIC) was used to measure local strains in the deformed micrographs obtained from the in-situ tensile test. Higher strain localization in the microstructure was measured for the areas in which the early ferrite-graphite decohesions occurred or the micro-cracks initiated. © 2017 Elsevier B.V.
|
|
| 12. |
- Lloyd-Spets, Anita, et al.
(författare)
-
New materials for chemical and biosensors
- 2006
-
Ingår i: Materials and Manufacturing Processes. - : Informa UK Limited. - 1042-6914 .- 1532-2475. ; 21:3, s. 253-256
-
Tidskriftsartikel (refereegranskat)abstract
- Wide band gap materials such as SiC, AlN, GaN, ZnO, and diamond have excellent properties such as high operation temperature when used as field effect devices and a high resonating frequency of the substrate materials used in piezoelectric resonator devices. Integration of FET and resonating sensors on the same chip enables powerful miniaturized devices, which can deliver increased information about a gas mixture or complex liquid. Examples of sensor devices based on different wide band gap materials will be given.
|
|
| 13. |
|
|
| 14. |
- Luttropp, K, et al.
(författare)
-
Real-world treatment persistence of golimumab in the management of immune-mediated rheumatic diseases in Europe: a systematic literature review
- 2019
-
Ingår i: BMJ open. - : BMJ. - 2044-6055. ; 9:5, s. e027456-
-
Tidskriftsartikel (refereegranskat)abstract
- To summarise real-world data from studies reporting golimumab persistence in European immune-mediated rheumatic disease (IMRD) populations and to report pooled estimates.DesignSystematic literature review.Data sourcesRelevant literature was identified through searching Medline and Embase via Ovid as well as the conference databases of European League Against Rheumatism and American College of Rheumatology—Association of Rheumatology Health Professionals.Eligibility criteriaWe screened records using predefined patients, interventions, comparators, outcomes and study design criteria. Eligible studies included reports of persistence among adult IMRD patients in Europe receiving treatment with subcutaneous golimumab. Clinical trials, randomised controlled trials, literature reviews, editorials, guidelines and studies with <20 patients receiving golimumab were excluded.Data extraction and synthesisFollowing double screening by two independent reviewers, 27 studies out of 578 identified records were selected for inclusion and subsequent data extraction. Persistence was most commonly reported at 12and 24 months; hence, pooled persistence estimates were calculated for these two time points and reported according to indication.ResultsPersistence ranged between 58.1% (psoriatic arthritis (PsA) patients regardless of treatment line) and 75.7% (biological-naïve rheumatoid arthritis patients) at 12 months; at 24 months, the range was 43% (axial spondyloarthritis (AxSpA) patients regardless of treatment line) and 69.6% (biological-naïve PsA patients). On the basis of data from 12 studies, persistence with golimumab treatment was either significantly higher or not significantly different from other tumour necrosis factor inhibitors (TNFi).ConclusionsGolimumab persistence at 24 months approximates 50%, with a lower persistence among AxSpA (43%) patients. However, as the number of studies in these populations was low, they warrant further research. In 12 studies comparing various TNFi treatments, golimumab was shown to have significantly better or equal persistence to its comparators.
|
|
| 15. |
|
|
| 16. |
|
|
| 17. |
- Ottosson, L., et al.
(författare)
-
Structurally derived mutations define congenital heart block-related epitopes within the 200-239 amino acid stretch of the Ro52 protein
- 2005
-
Ingår i: Scandinavian Journal of Immunology. - : Wiley. - 0300-9475 .- 1365-3083. ; 61:2, s. 109-118
-
Tidskriftsartikel (refereegranskat)abstract
- Congenital heart block is a passively transferred autoimmune condition, which affects the children of mothers with Ro/SSA autoantibodies. During pregnancy, the antibodies are transported across the placenta and affect the fetus. We have previously demonstrated that antibodies directed to the 200-239 amino acid (aa) stretch of the Ro52 component of the Ro/SSA antigen correlate with the development of congenital heart block. In this report, we investigated the antibody-antigen interaction of this target epitope in detail at a molecular and structural level. Peptides representing aa 200-239 (p200) with structurally derived mutations were synthesized to define the epitopes recognized by two Ro52 human monoclonal antibodies, S3A8 and M4H1, isolated from patient-derived phage display libraries. Analyses by ELISA, circular dichroism and MALDI-TOF-MS demonstrate that the antibody recognition is dependent on a partly a-helical fold within the putative leucine zipper of the 200-239 aa stretch and that the two human anti-p200 monoclonal antibodies, M4H1 and S3A8, recognize different epitopic structures within the p200 peptide. In addition, we investigated the representation of each fine specificity within the sera of mothers with children born with congenital heart block, and in such sera, antibodies of the S3A8 idiotype were more commonly detected and at higher levels than M4H1-like antibodies.
|
|
| 18. |
|
|
| 19. |
- Rapp, S., et al.
(författare)
-
All-epitaxial single-fused 1.55 ÎŒm vertical cavity laser based on an InP bragg reflector
- 1999
-
Ingår i: Japanese Journal of Applied Physics. - 0021-4922 .- 1347-4065. ; 38:2 B, s. 1261-1264
-
Tidskriftsartikel (refereegranskat)abstract
- We have realised an all-epitaxial 1.55 Όm vertical cavity laser by employing a single wafer-fusion step. The laser structure is fabricated by fusing a 32-period p-doped (C) AlGaAs/GaAs top mirror onto a half-cavity structure consisting of a 50-period n-doped (Si) GaInAsP/InP bottom mirror and a 9 quantum well GaInAsP-active material. Laser mesas are fabricated using a wet etching procedure for the top mirror. The top mirror also contains an AlAs layer for oxidation for current confinement. The lasers operate pulsed at temperatures up to 40°C and at pulse lengths of 10 Όs up to 5°C. The minimum threshold current density at room temperature is 1.8 kA/cm2 for a device diameter of 55 Όm. Compared to nonoxidised laser diodes, the threshold current is markedly decreased in oxidised laser diodes. © 1999 Publication Board, Japanese Journal of Applied Physics.
|
|
| 20. |
- Rapp, S., et al.
(författare)
-
All epitaxial single-fused 1.55ÎŒm vertical cavity laser based on an InP Bragg reflector
- 1998
-
Ingår i: Conference Proceedings - International Conference on Indium Phosphide and Related Materials. - Tsukuba, Jpn. ; , s. 303-306
-
Konferensbidrag (refereegranskat)abstract
- We have realised all epitaxial 1.55Όm vertical cavity lasers by employing a single wafer-fusion step. The laser structure is fabricated by fusing a 32 period p-doped (C) AlGaAs/GaAs top mirror to a half cavity structure consisting of a 50 period n-doped (Si) GaInAsP/InP bottom mirror and 9QW GaInAsP-active material. Laser mesas are fabricated using a wet etching procedure for the top mirror. The top mirror also contains an AlAs layer for oxidation for current confinement. The lasers operate pulsed for temperatures up to 40°C and at pulse lengths of 10Όs up to 5°C. The minimum threshold current density at room temperature is 1.8kA/cm2 for a device diameter of 55Όm. Compared to non-oxidised laser diodes, the oxidation decreases the threshold currents significantly.
|
|
| 21. |
- Salomonsson, P., et al.
(författare)
-
Temperature-dependent performance of 1.55 ÎŒm vertical-cavity lasers with InGaAsP/InP bottom mirror
- 1999
-
Ingår i: Conference Proceedings - International Conference on Indium Phosphide and Related Materials. - Davos, Switz. ; :Piscataway, NJ, United States, s. 223-226
-
Tidskriftsartikel (refereegranskat)abstract
- We have fabricated and evaluated a long-wavelength vertical-cavity laser (VCL) based on an epitaxially integrated InP distributed Bragg reflector (DBR) under continuous wave (CW) and pulsed conditions. We conclude that, for an InP-DBR-down configuration, the high-temperature performance is limited by the heat conductivity of the bottom mirror. The highest operating temperature for CW and pulsed condition is 17 °C and 101 °C respectively, indicating a substantial self-heating for CW. To investigate the prospect for improved performance in other mounting configurations, we have applied a two-dimensional finite element analysis to the heat transfer problem. It is suggested that for top-side-down mounting with the AlGaAs/GaAs DBR closest to the heat sink, a performance comparable to that of so called double-fused VCLs could be possible.
|
|
| 22. |
- Salomonsson, S., et al.
(författare)
-
A Population-based Investigation of the Autoantibody Profile in Mothers of Children with Atrioventricular Block
- 2011
-
Ingår i: Scandinavian Journal of Immunology. - Oxford : Blackwell Publishing. - 0300-9475 .- 1365-3083. ; 74:5, s. 511-517
-
Tidskriftsartikel (refereegranskat)abstract
- The objective of the study was to investigate the antigen specificity and occurrence of individual autoantibodies in mothers of children diagnosed with atrioventricular (AV) block in a nation-wide setting. Patients with AV block detected before 15 years of age were identified using national quality registries as well as a network of pediatric and adult cardiologists and rheumatologists at the six university hospitals in Sweden. Patients with gross heart malformations, surgically or infectiously induced blocks were excluded. Blood samples were obtained from the mothers and maternal autoantibody profile, including the occurrence of antibodies against Ro52, Ro60, La, SmB, SmD, RNP-70k, RNP-A, RNP-C, CENP-C, Scl-70, Jo-1, ribosomal RNP and histones was investigated in 193 mothers of children with AV block by immunoblotting and ELISA. Autoantibody reactivity was detected in 48% (93/193) of the mothers of children with AV block. In autoantibody-positive mothers, the vast majority, 95% (88/93), had antibodies against Ro52, while 63% (59/93) had autoantibodies to Ro60 and 58% (54/93) had autoantibodies to La. In addition, 13% (12/93) of the autoantibody-positive mothers had antibodies to other investigated antigens besides Ro52, Ro60 and La, and of these anti-histone antibodies were most commonly represented, detected in 8% (7/93) of the mothers. In conclusion, this Swedish population-based study confirms that maternal autoantibodies may associate with heart block in the child. Further, our data demonstrate a dominant role of Ro52 antibodies in association with AV block.
|
|
| 23. |
- Streubel, K., et al.
(författare)
-
Long wavelength vertical cavity lasers
- 1999
-
Ingår i: Proceedings of SPIE - The International Society for Optical Engineering. - San Jose, CA, USA. ; 3625:Bellingham, WA, United States, s. 304-314
-
Tidskriftsartikel (refereegranskat)abstract
- We report on three novel vertical cavity laser (VCL) structures for 1.55 Όm operation. Two of the VCL structures utilize an n-type GaInAsP/InP Bragg mirror combined with an Al(Ga)As/GaAs mirror using either wafer-fusion or metamorphic epitaxial growth. The third VCL employs two wafer fused AlGaAs/GaAs mirrors, in which lateral current confinement is obtained by localized fusion of the p-mirror. All three VCLs use strained GaInAsP quantum wells as active material and achieve continuous-wave (CW) operation at room-temperature or above. The single fused VCL operates up to 17 °C and 101 °C in continuous-wave and pulsed mode, respectively. The monolithic VCL-structure with a metamorphic GaAs/AlAs n-type mirror uses a reversed biased tunnel junction for current injection. This laser achieves record high output power (1mW) at room temperature and operates CW up to 45 °C. The double fused VCLs with a 10×10 Όm2 active area operate CW up to 30 °C with threshold current as low as 2.5 mA and series resistance of 30 Ohms. The emission spectra exhibit a single lasing mode polarized with 30 dB extinction ratio and a spectral linewidth of 150 MHz.
|
|
| 24. |
- Streubel, K., et al.
(författare)
-
Novel technologies for 1.55-mu m vertical cavity lasers
- 2000
-
Ingår i: Optical Engineering. - : SPIE-Intl Soc Optical Eng. - 0091-3286 .- 1560-2303. ; 39:2, s. 488-497
-
Tidskriftsartikel (refereegranskat)abstract
- We report on three novel vertical-cavity laser (VCL) structures for 1.55-mu m operation. Two of the structures utilize an n-type GalnAsP/InP Bragg mirror combined with an Al(Ga)As/GaAs mirror using either wafer fusion or metamorphic epitaxial growth. The third employs two wafer-fused AlGaAs/GaAs mirrors, in which lateral current confinement is obtained by localized fusion of the p mirror. Ali three VCLs use strained GalnAsP quantum welts as active material and achieve continuous-wave (cw) operation at room temperature or above. The single fused VCL operates up to 17 and 101 degrees C in continuous-wave and pulsed mode, respectively. The monolithic VCL-structure with a metamorphic GaAs/AlAs n-type mirror uses a reverse-biased tunnel junction for current injection. This laser achieves record high output power (1 mW) at room temperature and operates cw up to 45 degrees C. The double fused VCLs with a 10x10-mu m(2) active area operate cw up to 30 degrees C with threshold current as low as 2.5 mA and series resistance of 30 Omega. The emission spectra exhibit a single lasing mode polarized with 30-dB extinction ratio and a spectral linewidth of 150 MHz.
|
|
| 25. |
|
|
| 26. |
|
|
| 27. |
- Wingbrandt, H, et al.
(författare)
-
New Materials for chemical and biosensors
- 2004
-
Ingår i: International Symposium on Advanced Materials and Processing, ISAMAP2K4, 6-8 December, I.I. T., Kharagpur, India.
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)
|
|
| 28. |
|
|
| 29. |
|
|
| 30. |
|
|
| 31. |
|
|
| 32. |
- Asplund, C., et al.
(författare)
-
Doping-induced losses in AlAs/GaAs distributed Bragg reflectors
- 2001
-
Ingår i: Journal of Applied Physics. - : AIP Publishing. - 0021-8979 .- 1089-7550. ; 90:2, s. 794-800
-
Tidskriftsartikel (refereegranskat)abstract
- We have studied n- and p-type doping-induced performance degradation of AlAs/GaAs distributed Bragg reflectors (DBRs) for applications in vertical cavity lasers (VCLs). Based on high-accuracy optical reflectance and triple-axis x-ray diffraction measurements on a variety of differently doped DBR structures grown by metalorganic vapor-phase epitaxy, a fitting procedure was employed to extract the doping-dependent optical loss. A striking observation is that the reflectance of these DBRs is much more sensitive to n- than p-type doping incorporation. While in the latter case the loss can be well accounted for by intervalence-band and free-carrier absorption, additional loss mechanisms must be considered for n-type DBRs. We relate the losses to doping-enhanced interdiffusion effects resulting in increased interface scattering. These findings should have important consequences for the design of VCLs, demonstrating the importance of reduced n-type doping concentrations and/or growth temperatures, or the application of alternative device concepts, e.g., employing intracavity contacts.
|
|
| 33. |
|
|
| 34. |
|
|
| 35. |
|
|
| 36. |
|
|
| 37. |
|
|
| 38. |
|
|
| 39. |
- Cristal, Adrian, et al.
(författare)
-
LEGaTO: First Steps Towards Energy-Efficient Toolset for Heterogeneous Computing
- 2018
-
Ingår i: ACM International Conference Proceeding Series. - New York, NY, USA : ACM. ; , s. 210-217
-
Konferensbidrag (refereegranskat)abstract
- LEGaTO is a three-year EU H2020 project which started in December 2017. The LEGaTO project will leverage task-based programming models to provide a software ecosystem for Made-in-Europe heterogeneous hardware composed of CPUs, GPUs, FPGAs and dataflow engines. The aim is to attain one order of magnitude energy savings from the edge to the converged cloud/HPC.
|
|
| 40. |
- Cristal, Adrian, et al.
(författare)
-
LEGaTO: Towards Energy-Efficient, Secure, Fault-tolerant Toolset for Heterogeneous Computing
- 2018
-
Ingår i: Proceedings of the 15th ACM International Conference on Computing Frontiers. - New York, NY, USA : ACM. - 9781450357616 ; , s. 276-278
-
Konferensbidrag (refereegranskat)abstract
- LEGaTO is a three-year EU H2020 project which started in December 2017. The LEGaTO project will leverage task-based programming models to provide a software ecosystem for Made-in-Europe heterogeneous hardware composed of CPUs, GPUs, FPGAs and dataflow engines. The aim is to attain one order of magnitude energy savings from the edge to the converged cloud/HPC.
|
|
| 41. |
|
|
| 42. |
|
|
| 43. |
|
|
| 44. |
|
|
| 45. |
|
|
| 46. |
|
|
| 47. |
|
|
| 48. |
|
|
| 49. |
|
|
| 50. |
|
|
