| 1. |
- Kovtun, Alessandro, et al.
(författare)
-
Benchmarking of graphene-based materials: Real commercial products versus ideal graphene
- 2019
-
Ingår i: 2D Materials. - : IOP Publishing. - 2053-1583. ; 6:2
-
Tidskriftsartikel (refereegranskat)abstract
- There are tens of industrial producers claiming to sell graphene and related materials (GRM), mostly as solid powders. Recently the quality of commercial GRM has been questioned, and procedures for GRM quality control were suggested using Raman Spectroscopy or Atomic Force Microscopy. Such techniques require dissolving the sample in solvents, possibly introducing artefacts. A more pragmatic approach is needed, based on fast measurements and not requiring any assumption on GRM solubility. To this aim, we report here an overview of the properties of commercial GRM produced by selected companies in Europe, USA and Asia. We benchmark: (A) size, (B) exfoliation grade and (C) oxidation grade of each GRM versus the ones of 'ideal' graphene and, most importantly, versus what reported by the producer. In contrast to previous works, we report explicitly the names of the GRM producers and we do not re-dissolve the GRM in solvents, but only use techniques compatible with industrial powder metrology. A general common trend is observed: Products having low defectivity (%sp 2 bonds >95%) feature low surface area (<200 m 2 g -1 ), while highly exfoliated GRM show a lower sp 2 content, demonstrating that it is still challenging to exfoliate GRM at industrial level without adding defects.
|
|
| 2. |
- Durso, M., et al.
(författare)
-
Biomimetic graphene for enhanced interaction with the external membrane of astrocytes
- 2018
-
Ingår i: Journal of Materials Chemistry B. - : Royal Society of Chemistry (RSC). - 2050-7518 .- 2050-750X. ; 6:33, s. 5335-5342
-
Tidskriftsartikel (refereegranskat)abstract
- Graphene and graphene substrates display huge potential as material interfaces for devices and biomedical tools targeting the modulation or recovery of brain functionality. However, to be considered reliable neural interfaces, graphene-derived substrates should properly interact with astrocytes, favoring their growth and avoiding adverse gliotic reactions. Indeed, astrocytes are the most abundant cells in the human brain and they have a crucial physiological role to maintain its homeostasis and modulate synaptic transmission. In this work, we describe a new strategy based on the chemical modification of graphene oxide (GO) with a synthetic phospholipid (PL) to improve interaction of GO with brain astroglial cells. The PL moieties were grafted on GO sheets through polymeric brushes obtained by atom-transfer radical-polymerization (ATRP) between acryloyl-modified PL and GO nanosheets modified with a bromide initiator. The adhesion of primary rat cortical astrocytes on GO-PL substrates increased by about three times with respect to that on glass substrates coated with standard adhesion agents (i.e. poly-d-lysine, PDL) as well as with respect to that on non-functionalized GO. Moreover, we show that astrocytes seeded on GO-PL did not display significant gliotic reactivity, indicating that the material interface did not cause a detrimental inflammatory reaction when interacting with astroglial cells. Our results indicate that the reported biomimetic approach could be applied to neural prosthesis to improve cell colonization and avoid glial scar formation in brain implants. Additionally, improved adhesion could be extremely relevant in devices targeting neural cell sensing/modulation of physiological activity.
|
|
| 3. |
- Scidà, A., et al.
(författare)
-
Application of graphene-based flexible antennas in consumer electronic devices
- 2018
-
Ingår i: Materials Today. - : Elsevier BV. - 1369-7021 .- 1873-4103. ; 21:3, s. 223-230
-
Tidskriftsartikel (refereegranskat)abstract
- We describe the fabrication and characterization of Near-Field Communication (NFC) devices based on highly flexible, carbon-based antennas composed of stacked graphene multilayers. This material features a high value of conductivity (4.20 * 10 5 S/m) comparable to monocrystalline graphite, but is much more flexible and processable. We first studied the replacement of metal with carbon antennas using computer modeling, to select the best design. Then we manufactured several devices to be used according to the communication protocol ISO/IEC 15693. The inductance of the G-paper antennas was tested before and after hundreds of thousands of bending cycles at bending radii of 45 and 90 mm. During bending the self-resonance frequency and inductance peak showed minimal variation and the resistance at 1 MHz changed from 33.09 Ω to 34.18 Ω outperforming standard, commercial metallic antennas. The devices were successfully tested by exchanging data with a smartphone and other commercial NFC readers, matching the performance of standard, commercial metallic antennas. The graphene antennas could be deposited on different standard polymeric substrates or on textiles. Smart cards, flexible NFC tags and wearable NFC bracelets were prepared in this way to be used in electronic keys, business cards and other typical NFC applications.
|
|
| 4. |
- Anagnostopoulos, George, et al.
(författare)
-
Strain Engineering in Highly Wrinkled CVD Graphene/Epoxy Systems
- 2018
-
Ingår i: ACS Applied Materials & Interfaces. - : American Chemical Society (ACS). - 1944-8252 .- 1944-8244. ; 10:49, s. 43192-43202
-
Tidskriftsartikel (refereegranskat)abstract
- Chemical vapor deposition (CVD) is regarded as a promising fabrication method for the automated, large-scale, production of graphene and other two-dimensional materials. However, its full commercial exploitation is limited by the presence of structural imperfections such as folds, wrinkles, and even cracks that downgrade its physical and mechanical properties. For example, as shown here by means of Raman spectroscopy, the stress transfer from an epoxy matrix to CVD graphene is on average 30% of that of exfoliated monolayer graphene of over 10 μm in dimensions. However, in terms of electrical response, the situation is reversed; the resistance has been found here to decrease by the imposition of mechanical deformation possibly due to the opening up of the structure and the associated increase of electron mobility. This finding paves the way for employing CVD graphene/epoxy composites or coatings as conductive "networks" or bridges in cases for which the conductivity needs to be increased or at least retained when the system is under deformation. The tuning/control of such systems and their operative limitations are discussed here.
|
|
| 5. |
- Poletti, Fabrizio, et al.
(författare)
-
Graphene-Paper-Based Electrodes on Plastic and Textile Supports as New Platforms for Amperometric Biosensing
- 2022
-
Ingår i: Advanced Functional Materials. - : Wiley. - 1616-3028 .- 1616-301X. ; 32:7
-
Tidskriftsartikel (refereegranskat)abstract
- The possibility of exfoliating graphite into graphene sheets allows the researchers to produce a material, termed “graphene paper” (G-paper), conductive as graphite but more flexible and processable. G-paper is already used for electronic applications, like conductors, antennas, and heaters, outperforming metal conductors thanks to its high flexibility, lightness, chemical stability, and compatibility with polymeric substrates. Here, the effectiveness in the use of G-paper for the realization of electrodes on flexible plastic substrates and textiles, and their applicability as amperometric sensors are demonstrated. The performance of these devices is compared with commercial platforms made of carbon-based inks, finding that they outperform commercial devices in sensing nicotinamide adenine dinucleotide (NADH), a key molecule for enzymatic biosensing; the electrodes can achieve state-of-the-art sensitivity (107.2 μA mm−1 cm−2) and limit of detection (0.6 × 10−6 m) with no need of additional functionalization. Thanks to this property, the stable deposition of a suitable enzyme, namely lactate dehydrogenase, on the electrode surface is used as a proof of concept of the applicability of this new platform for the realization of a biosensor. The possibility of having a single material suitable for antennas, electronics, and now sensing opens new opportunities for smart fabrics in wearable electronic applications.
|
|
