| 1. |
- Almessiere, M. A., et al.
(författare)
-
Effects of Ce-Dy rare earths co-doping on various features of Ni-Co spinel ferrite microspheres prepared via hydrothermal approach
- 2021
-
Ingår i: Journal of Materials Research and Technology. - : Elsevier BV. - 2238-7854 .- 2214-0697. ; 14, s. 2534-2553
-
Tidskriftsartikel (refereegranskat)abstract
- The effects of Ce-Dy co-doping on the crystal structure, optical, dielectric, magnetic properties, and hyperfine interactions of Ni-Co spinel ferrite microspheres synthesized hydrothermally have been studied. A series of ferrites with the general formula Ni0.5-Co0.5CexDyxFe2-2xO4 were synthesized with x values ranging from 0.00 to 0.10. The phase, crystallinity, and morphology of ferrite microspheres were analyzed by X-ray powder diffractometry (XRD), scanning and transmission electron microscopes (SEM and TEM), respectively. The structural analyses of the synthesized ferrite microspheres confirmed their high purity and cubic crystalline phase. The Diffuse reflectance spectroscopic (DRS) measurements were presented to calculate direct optical energy band gaps (E-g) and is found in the range 1.63 eV - 1.84 eV. Fe-57 Mossbauer spectroscopy showed that the hyperfine magnetic field of tetrahedral (A) and octahedral (B) sites decreased with the substitution of Dy3+-Ce3+ ions that preferrentially occupy the B site. The impact of the rare-earth content (x) on the magnetic features of the prepared NiCo ferrite microspheres was investigated by analyzing M-H loops, which showed soft ferrimagnetism. The magnetic features illustrate a great impact of the incorporation of Ce3+-Dy3+ ions within the NiCo ferrite structure. The saturation magnetization (M-s), remanence (M-r), and coercivity (H-c) increased gradually with increasing Ce-Dy content. At x = 0.04, M-s, M-r, and H-c attain maximum values of about 31.2 emu/g, 11.5 emu/g, and 512.4 Oe, respectively. The Bohr magneton (n(B)) and magneto-crystalline anisotropy constant (K-eff) were also determined and evaluated with correlation to other magnetic parameters. Further increase in Ce3+-Dy3+ content (i.e., x >= 0.06) was found to decrease M-s, M-r, and H-c values. The variations in magnetic parameters (M-s, M-r, and H-c) were largely caused by the surface spins effect, the variations in crystallite/particle size, the distribution of magnetic ions into the different sublattices, the evolutions of magneto-crystalline anisotropy, and the variations in the magnetic moment (n(B)). The squareness ratios were found to be lower than the predicted theoretical value of 0.5 for various samples, indicating that the prepared Ce-Dy substituted NiCo ferrite microspheres are composed of NPs with single-magnetic domain (SMD). Temperature and frequency-dependent electrical and dielectric measurements have been done to estimate the ac/dc conductivity, dielectric constant, and tangent loss values for all the samples. The ac conductivity measurements confirmed the power-law rules, largely dependent on Ce-Dy content. Impedance analysis stated that the conduction mechanisms in all samples are mainly due to the grains-grain boundaries. The dielectric constant of NiCo ferrite microspheres give rise to normal dielectric distribution, with the frequency depending strongly on the Ce-Dy content. The observed variation in tangential loss with frequency can be attributed to the conduction mechanism in ferrites, like Koop's phenomenological model.
|
|
| 2. |
- Amir, M., et al.
(författare)
-
Synthesis and Characterization of CoxZn1−xAlFeO4 Nanoparticles
- 2015
-
Ingår i: Journal of Inorganic and Organometallic Polymers and Materials. - : Springer Science and Business Media LLC. - 1574-1443 .- 1574-1451. ; 25:4, s. 747-754
-
Tidskriftsartikel (refereegranskat)abstract
- Nanocrystalline powders of cobalt and aluminum co-substituted zinc ferrites with general formula CoxZn1−xAlFeO4 (x = 0.0–1.0) have been synthesized for the first time. Using the citrate-microwave technique and the citric acid as combustion–complexion agent (fuel), materials with spinel mono-phase cubic spinel structure were successfully prepared. The characterization of products was done by XRD, SEM and VSM. The crystallite size estimated by Scherrer formula has been found in the range of 7.7–9.6 nm. The magnetic properties were studied by room temperature (RT) VSM magnetization measurements. The small remanent magnetization (Mr) and coercivity (Hc) values reveal the superparamagnetic nature of nanoparticles (NPs) at RT. The extrapolated saturation magnetization (Ms) is maximum for Co0.8Zn0.2AlFeO4 (17.15 emu/g) and minimum for ZnAlFeO4 particles (4.22 emu/g). This case is attributed to high or low amount of cation distribution change from normal to mixed spinel structure. The average magnetic diameters (Dmag) were calculated from magnetic fit studies of M–H spectra. Dmag values are between 8.17 and 8.46 nm and this range is in great accordance with the obtained diameters from XRD measurements. The small Mr/Ms ratios (maximum, 0.219) specify the uniaxial anisotropy according to Stoner–Wohlfarth model for CoxZn1−xAlFeO4 NPs. RT effective anisotropy constants (Keff) were calculated by using Ms and Hc values. Keff constants increased with increasing Co content in the spinel NPs.
|
|
| 3. |
- Sertkol, M., et al.
(författare)
-
Microwave synthesis and characterization of Zn-doped nickel ferrite nanoparticles
- 2009
-
Ingår i: Journal of Alloys and Compounds. - : Elsevier BV. - 0925-8388 .- 1873-4669. ; 486:1-2, s. 325-329
-
Tidskriftsartikel (refereegranskat)abstract
- Microwave assisted combustion method was used to synthesize nanocrystalline ZnxNi1-xFe2O4 from a stoichiometric mixture of corresponding metal nitrates and urea powders. The structural, chemical and magnetic properties of Ni-Zn ferrite was determined by X-ray powder diffraction (XRD), transmission electron microscopy (TEM), infrared spectroscopy (FTIR), vibrating sample magnetometry (VSM) and DC conductivity measurements. Results showed that the material was spinel structure with a high purity with an estimated crystallite size of similar to 20 nm by X-ray line profile fitting. TEM analysis showed necked near-spherical particles with an average size of similar to 20 nm, reflecting highly crystalline nature of these nanoparticles. Magnetic properties showed anomalities as the Zn doping level increased. This has been explained and attributed to the relative positions of Ni, Zn, and Fe ions in the crystal lattice.
|
|
