| 1. |
- Shtepliuk, Ivan I., 1987-, et al.
(författare)
-
Lead (Pb) interfacing with epitaxial graphene
- 2018
-
Ingår i: Physical Chemistry, Chemical Physics - PCCP. - : Royal Society of Chemistry. - 1463-9076 .- 1463-9084. ; 20:25, s. 17105-17116
-
Tidskriftsartikel (refereegranskat)abstract
- Here, we report the electrochemical deposition of lead (Pb) as a model metal on epitaxial graphene fabricated on silicon carbide (Gr/SiC). The kinetics of electrodeposition and morphological characteristics of the deposits were evaluated by complementary electrochemical, physical and computational methods. The use of Gr/SiC as an electrode allowed the tracking of lead-associated redox conversions. The analysis of current transients passed during the deposition revealed an instantaneous nucleation mechanism controlled by convergent mass transport on the nuclei locally randomly distributed on epitaxial graphene. This key observation of the deposit topology was confirmed by low values of the experimentally-estimated apparent diffusion coefficient, Raman spectroscopy and scanning electron microscopy (SEM) studies. First principles calculations showed that the nucleation of Pb clusters on the graphene surface leads to weakening of the interaction strength of the metal-graphene complex, and only spatially separated Pb adatoms adsorbed on bridge and/or edge-plane sites can affect the vibrational properties of graphene. We expect that the lead adatoms can merge in large metallic clusters only at defect sites that reinforce the metal-graphene interactions. Our findings provide valuable insights into both heavy metal ion electrochemical analysis and metal electroplating on graphene interfaces that are important for designing effective detectors of toxic heavy metals.
|
|
| 2. |
- Santangelo, Maria Francesca, et al.
(författare)
-
Epitaxial graphene sensors combined with 3D printed microfluidic chip for heavy metals detection
- 2018
-
Ingår i: Proceedings. - Basel Switzerland : MDPI. - 2504-3900. ; 2:13
-
Tidskriftsartikel (refereegranskat)abstract
- Two-dimensional materials may constitute key elements in the development of a sensing platform where extremely high sensitivity is required, since even minimal chemical interaction can generate appreciable changes in the electronic state of the material. In this work, we investigate the sensing performance of epitaxial graphene on Si-face 4H-SiC (EG/SiC) for liquid-phase detection of heavy metals (e.g., Pb). The integration of preparatory steps needed for sample conditioning is included in the sensing platform, exploiting fast prototyping using a 3D printer, which allows direct fabrication of a microfluidic chip incorporating all the features required to connect and execute the Lab-on-chip (LOC) functions. It is demonstrated that interaction of Pb2+ ions in water-based solutions with the EG enhances its conductivity exhibiting a Langmuir correlation between signal and Pb2+ concentration. Several concentrations of Pb2+ solutions ranging from 125 nM to 500 µM were analyzed showing good stability and reproducibility over time.
|
|
| 3. |
- Shtepliuk, Ivan I., 1987-, et al.
(författare)
-
Combining graphene with silicon carbide: synthesis and properties - a review
- 2016
-
Ingår i: Semiconductor Science and Technology. - : IOP PUBLISHING LTD. - 0268-1242 .- 1361-6641. ; 31:11, s. 113004-
-
Forskningsöversikt (refereegranskat)abstract
- Being a true two-dimensional crystal, graphene possesses a lot of exotic properties that would enable unique applications. Integration of graphene with inorganic semiconductors, e.g. silicon carbide (SiC) promotes the birth of a class of hybrid materials which are highly promising for development of novel operations, since they combine the best properties of two counterparts in the frame of one hybrid platform. As a specific heterostructure, graphene on SiC performs strongly, dependent on the synthesis method and the growth modes. In this article, a comprehensive review of the most relevant studies of graphene growth methods and mechanisms on SiC substrates has been carried out. The aim is to elucidate the basic physical processes that are responsible for the formation of graphene on SiC. First, an introduction is made covering some intriguing and not so often discussed properties of graphene. Then, we focus on integration of graphene with SiC, which is facilitated by the nature of SiC to assume graphitization. Concerning the synthesis methods, we discuss thermal decomposition of SiC, chemical vapor deposition and molecular beam epitaxy, stressing that the first technique is the most common one when SiC substrates are used. In addition, we briefly appraise graphene synthesis via metal mediated carbon segregation. We address in detail the main aspects of the substrate effect, such as substrate face polarity, off-cut, kind of polytype and nonpolar surfaces on the growth of graphene layers. A comparison of graphene grown on the polar faces is made. In particular, growth of graphene on Si-face SiC is critically analyzed concerning growth kinetics and growth mechanisms taking into account the specific characteristics of SiC (0001) surfaces, such as the step-terrace structure and the unavoidable surface reconstruction upon heating. In all subtopics obstacles and solutions are featured. We complete the review with a short summary and concluding remarks.
|
|
| 4. |
- Zaman, Quaid, et al.
(författare)
-
Water Diffusion Effectsat Gold-Graphene Interfaces Supporting Surface Plasmon Polaritons
- 2022
-
Ingår i: The Journal of Physical Chemistry C. - : AMER CHEMICAL SOC. - 1932-7447 .- 1932-7455. ; 126:32, s. 13905-13919
-
Tidskriftsartikel (refereegranskat)abstract
- We present a detailed investigation on the effects of water diffusion at the different interfaces of gold-graphene plasmonic sensors on the propagation of the supported surface plasmon polaritons (SPPs). The substrate/metal interfacial chemical reactions are investigated by monitoring the full width at half-maximum of the SPR reflectivity curve. Although protection by single-layer graphene (SLG) grown by chemical vapor deposition inhibits the chemical reactions happening at the metal-dielectric interfaces, SPR experimental results confirm that water diffusion paths through the borders of graphene domains are still present into the plasmonic sensors. Density functional theory calculations show that the doping level of SLG after the transfer on gold as well as interfacial charge transfer can be tuned in the presence of water molecules. On these bases, we propose a simplified effective medium approach for heterogeneous metal-carbon interfaces, where the interaction between the surface atomic layers of the gold thin film, water molecules, and the SLG induces the creation of an extended charge density difference region crossing the Au/H2O/SLG/H2O heterointerface. The latter is modeled as an ultrathin effective medium with a thickness and extraordinary optical susceptivity and conductivity that are different from those of the free-standing graphene. In this context, the extraordinary refractive index and thickness of the graphene-gold effective medium are measured in the near-infrared on the low-damping SPR platforms by applying the two-medium SPR method. The results are coherent with graphene n-doping in water environment, showing that the optically excited electrons along the extraordinary axis have a substantial bonding character and that the enhancement of the sensitivity of the gold-graphene plasmonic sensors is not related to a shift in the plasma frequency of the metal layer but to the changes in the extraordinary polarizability of graphene. The research highlights the importance of the SLG-substrate and SLG-environment interactions in graphene-protected plasmonics and optoelectronics.
|
|
