| 1. |
|
|
| 2. |
- Lozano, Rafael, et al.
(author)
-
Measuring progress from 1990 to 2017 and projecting attainment to 2030 of the health-related Sustainable Development Goals for 195 countries and territories: a systematic analysis for the Global Burden of Disease Study 2017
- 2018
-
In: The Lancet. - : Elsevier. - 1474-547X .- 0140-6736. ; 392:10159, s. 2091-2138
-
Journal article (peer-reviewed)abstract
- Background: Efforts to establish the 2015 baseline and monitor early implementation of the UN Sustainable Development Goals (SDGs) highlight both great potential for and threats to improving health by 2030. To fully deliver on the SDG aim of “leaving no one behind”, it is increasingly important to examine the health-related SDGs beyond national-level estimates. As part of the Global Burden of Diseases, Injuries, and Risk Factors Study 2017 (GBD 2017), we measured progress on 41 of 52 health-related SDG indicators and estimated the health-related SDG index for 195 countries and territories for the period 1990–2017, projected indicators to 2030, and analysed global attainment. Methods: We measured progress on 41 health-related SDG indicators from 1990 to 2017, an increase of four indicators since GBD 2016 (new indicators were health worker density, sexual violence by non-intimate partners, population census status, and prevalence of physical and sexual violence [reported separately]). We also improved the measurement of several previously reported indicators. We constructed national-level estimates and, for a subset of health-related SDGs, examined indicator-level differences by sex and Socio-demographic Index (SDI) quintile. We also did subnational assessments of performance for selected countries. To construct the health-related SDG index, we transformed the value for each indicator on a scale of 0–100, with 0 as the 2·5th percentile and 100 as the 97·5th percentile of 1000 draws calculated from 1990 to 2030, and took the geometric mean of the scaled indicators by target. To generate projections through 2030, we used a forecasting framework that drew estimates from the broader GBD study and used weighted averages of indicator-specific and country-specific annualised rates of change from 1990 to 2017 to inform future estimates. We assessed attainment of indicators with defined targets in two ways: first, using mean values projected for 2030, and then using the probability of attainment in 2030 calculated from 1000 draws. We also did a global attainment analysis of the feasibility of attaining SDG targets on the basis of past trends. Using 2015 global averages of indicators with defined SDG targets, we calculated the global annualised rates of change required from 2015 to 2030 to meet these targets, and then identified in what percentiles the required global annualised rates of change fell in the distribution of country-level rates of change from 1990 to 2015. We took the mean of these global percentile values across indicators and applied the past rate of change at this mean global percentile to all health-related SDG indicators, irrespective of target definition, to estimate the equivalent 2030 global average value and percentage change from 2015 to 2030 for each indicator. Findings: The global median health-related SDG index in 2017 was 59·4 (IQR 35·4–67·3), ranging from a low of 11·6 (95% uncertainty interval 9·6–14·0) to a high of 84·9 (83·1–86·7). SDG index values in countries assessed at the subnational level varied substantially, particularly in China and India, although scores in Japan and the UK were more homogeneous. Indicators also varied by SDI quintile and sex, with males having worse outcomes than females for non-communicable disease (NCD) mortality, alcohol use, and smoking, among others. Most countries were projected to have a higher health-related SDG index in 2030 than in 2017, while country-level probabilities of attainment by 2030 varied widely by indicator. Under-5 mortality, neonatal mortality, maternal mortality ratio, and malaria indicators had the most countries with at least 95% probability of target attainment. Other indicators, including NCD mortality and suicide mortality, had no countries projected to meet corresponding SDG targets on the basis of projected mean values for 2030 but showed some probability of attainment by 2030. For some indicators, including child malnutrition, several infectious diseases, and most violence measures, the annualised rates of change required to meet SDG targets far exceeded the pace of progress achieved by any country in the recent past. We found that applying the mean global annualised rate of change to indicators without defined targets would equate to about 19% and 22% reductions in global smoking and alcohol consumption, respectively; a 47% decline in adolescent birth rates; and a more than 85% increase in health worker density per 1000 population by 2030. Interpretation: The GBD study offers a unique, robust platform for monitoring the health-related SDGs across demographic and geographic dimensions. Our findings underscore the importance of increased collection and analysis of disaggregated data and highlight where more deliberate design or targeting of interventions could accelerate progress in attaining the SDGs. Current projections show that many health-related SDG indicators, NCDs, NCD-related risks, and violence-related indicators will require a concerted shift away from what might have driven past gains—curative interventions in the case of NCDs—towards multisectoral, prevention-oriented policy action and investments to achieve SDG aims. Notably, several targets, if they are to be met by 2030, demand a pace of progress that no country has achieved in the recent past. The future is fundamentally uncertain, and no model can fully predict what breakthroughs or events might alter the course of the SDGs. What is clear is that our actions—or inaction—today will ultimately dictate how close the world, collectively, can get to leaving no one behind by 2030.
|
|
| 3. |
- Causevic, Adnan, et al.
(author)
-
Effects of Negative Testing on TDD : An Industrial Experiment
- 2013
-
In: Agile Processes in Software Engineering and Extreme Programming. - Berlin, Heidelberg : Springer. - 9783642383137 - 9783642383144 ; , s. 91-105
-
Book chapter (peer-reviewed)abstract
- In our recent academic experiments, an existence of positive test bias, that is lack of negative test cases, was identified when a test driven development approach was used. At the same time, when defect detecting ability of individual test cases was calculated, it was noted that the probability of a negative test case to detect a defect was substantially higher than that of a positive test case. The goal of this study is to investigate the existence of positive test bias in test driven development within an industrial context, and measure defect detecting ability of both positive and negative test cases. An industrial experiment was conducted at Infosys Ltd. India, whose employees voluntarily signed up to participate in the study and were randomly assigned to groups utilizing test driven development, test driven development with negative testing, and test last development. Source code and test cases created by each participant during the study were collected and analysed. The collected data indicate a statistically significant difference between the number of positive and negative test cases created by industrial participants, confirming the existence of positive test bias. The difference in defect detecting ability of positive and negative test cases is also statistically significant. As a result, similarly to our previous academic study, 29% of all test cases were negative, contributing by revealing as much as 71% of all the defects found by all test cases. With this industrial experiment, we confirmed the existence of a positive test bias in an industrial context, as well as significantly higher defect detecting ability of negative test cases.
|
|
| 4. |
|
|
| 5. |
- Causevic, Adnan, et al.
(author)
-
Industrial Study on Test Driven Development: Challenges and Experience
- 2013
-
Conference paper (peer-reviewed)abstract
- Conducting empirical studies in industry always presents a major challenge for many researchers. Being a graduate student does not make things any easier. Often due to the lack of experience, credibility or just very limited networking, graduate students do not receive many opportunities to directly collaborate with industry and experiment their theoretical models in a realistic environment. On the other hand, empirical research conducted in an academic settings is often criticised for using students as subjects and working with a small sample size, thus creating major validity threat of the published results. In this paper we are presenting an experience report from an industrial empirical study conducted at Infosys Ltd., India with the support of their global internship program for graduate students, InStep. Focus of the paper is to present several challenges arisen before, during, and after the study, requiring an immediate attention in order to have a successful experiment completion. We also discuss and elaborate the data analysis results and its implication to our current research activities.
|
|
| 6. |
- Griswold, Max G., et al.
(author)
-
Alcohol use and burden for 195 countries and territories, 1990-2016 : a systematic analysis for the Global Burden of Disease Study 2016
- 2018
-
In: The Lancet. - : Elsevier. - 0140-6736 .- 1474-547X. ; 392:10152, s. 1015-1035
-
Journal article (peer-reviewed)abstract
- Background: Alcohol use is a leading risk factor for death and disability, but its overall association with health remains complex given the possible protective effects of moderate alcohol consumption on some conditions. With our comprehensive approach to health accounting within the Global Burden of Diseases, Injuries, and Risk Factors Study 2016, we generated improved estimates of alcohol use and alcohol-attributable deaths and disability-adjusted life-years (DALYs) for 195 locations from 1990 to 2016, for both sexes and for 5-year age groups between the ages of 15 years and 95 years and older.Methods: Using 694 data sources of individual and population-level alcohol consumption, along with 592 prospective and retrospective studies on the risk of alcohol use, we produced estimates of the prevalence of current drinking, abstention, the distribution of alcohol consumption among current drinkers in standard drinks daily (defined as 10 g of pure ethyl alcohol), and alcohol-attributable deaths and DALYs. We made several methodological improvements compared with previous estimates: first, we adjusted alcohol sales estimates to take into account tourist and unrecorded consumption; second, we did a new meta-analysis of relative risks for 23 health outcomes associated with alcohol use; and third, we developed a new method to quantify the level of alcohol consumption that minimises the overall risk to individual health.Findings: Globally, alcohol use was the seventh leading risk factor for both deaths and DALYs in 2016, accounting for 2.2% (95% uncertainty interval [UI] 1.5-3.0) of age-standardised female deaths and 6.8% (5.8-8.0) of age-standardised male deaths. Among the population aged 15-49 years, alcohol use was the leading risk factor globally in 2016, with 3.8% (95% UI 3.2-4-3) of female deaths and 12.2% (10.8-13-6) of male deaths attributable to alcohol use. For the population aged 15-49 years, female attributable DALYs were 2.3% (95% UI 2.0-2.6) and male attributable DALYs were 8.9% (7.8-9.9). The three leading causes of attributable deaths in this age group were tuberculosis (1.4% [95% UI 1. 0-1. 7] of total deaths), road injuries (1.2% [0.7-1.9]), and self-harm (1.1% [0.6-1.5]). For populations aged 50 years and older, cancers accounted for a large proportion of total alcohol-attributable deaths in 2016, constituting 27.1% (95% UI 21.2-33.3) of total alcohol-attributable female deaths and 18.9% (15.3-22.6) of male deaths. The level of alcohol consumption that minimised harm across health outcomes was zero (95% UI 0.0-0.8) standard drinks per week.Interpretation: Alcohol use is a leading risk factor for global disease burden and causes substantial health loss. We found that the risk of all-cause mortality, and of cancers specifically, rises with increasing levels of consumption, and the level of consumption that minimises health loss is zero. These results suggest that alcohol control policies might need to be revised worldwide, refocusing on efforts to lower overall population-level consumption.
|
|
| 7. |
|
|
| 8. |
- Ma, Chunyan, et al.
(author)
-
CO2 Separation by a Series of Aqueous Morpholinium-Based Ionic Liquids with Acetate Anions
- 2020
-
In: ACS Sustainable Chemistry and Engineering. - : American Chemical Society (ACS). - 2168-0485. ; 8:1, s. 415-426
-
Journal article (peer-reviewed)abstract
- In this work, CO2 absorption capacities in a series of aqueous N-alkyl-N-methylmorpholinium-based ILs with acetate as the counterpart anion were investigated. Among these ILs, N-butyl-N-methylmorpholinium acetate ([Bmmorp][OAc]) with the highest CO2 absorption capacity was screened for thermodynamic modeling. The non-random two-liquid model and the Redlich–Kwong equation of state (NRTL-RK model) were used to describe the phase equilibria. The CH4 absorption capacity in the aqueous [Bmmorp][OAc] was also measured in order to verify the results predicted from the thermodynamic modeling, and the comparison shows the reliability of the model prediction. The parameters were embedded into the commercial software Aspen Plus. After that, the aqueous [Bmmorp][OAc] solutions with 30–40 wt % of water were selected to carry out process simulation for CO2 separation from biogas, and it was found that using these aqueous [Bmmorp][OAc] gave rise to lower energy usage and smaller size of equipment than other physical solvents. The results suggest that aqueous [Bmmorp][OAc] solution can be used as an alternative to organic solvents and has the potential to decrease the cost of CO2 separation.
|
|
| 9. |
- Murray, Christopher J. L., et al.
(author)
-
Population and fertility by age and sex for 195 countries and territories, 1950–2017: a systematic analysis for the Global Burden of Disease Study 2017
- 2018
-
In: The Lancet. - 1474-547X .- 0140-6736. ; 392:10159, s. 1995-2051
-
Journal article (peer-reviewed)abstract
- Background: Population estimates underpin demographic and epidemiological research and are used to track progress on numerous international indicators of health and development. To date, internationally available estimates of population and fertility, although useful, have not been produced with transparent and replicable methods and do not use standardised estimates of mortality. We present single-calendar year and single-year of age estimates of fertility and population by sex with standardised and replicable methods. Methods: We estimated population in 195 locations by single year of age and single calendar year from 1950 to 2017 with standardised and replicable methods. We based the estimates on the demographic balancing equation, with inputs of fertility, mortality, population, and migration data. Fertility data came from 7817 location-years of vital registration data, 429 surveys reporting complete birth histories, and 977 surveys and censuses reporting summary birth histories. We estimated age-specific fertility rates (ASFRs; the annual number of livebirths to women of a specified age group per 1000 women in that age group) by use of spatiotemporal Gaussian process regression and used the ASFRs to estimate total fertility rates (TFRs; the average number of children a woman would bear if she survived through the end of the reproductive age span [age 10–54 years] and experienced at each age a particular set of ASFRs observed in the year of interest). Because of sparse data, fertility at ages 10–14 years and 50–54 years was estimated from data on fertility in women aged 15–19 years and 45–49 years, through use of linear regression. Age-specific mortality data came from the Global Burden of Diseases, Injuries, and Risk Factors Study (GBD) 2017 estimates. Data on population came from 1257 censuses and 761 population registry location-years and were adjusted for underenumeration and age misreporting with standard demographic methods. Migration was estimated with the GBD Bayesian demographic balancing model, after incorporating information about refugee migration into the model prior. Final population estimates used the cohort-component method of population projection, with inputs of fertility, mortality, and migration data. Population uncertainty was estimated by use of out-of-sample predictive validity testing. With these data, we estimated the trends in population by age and sex and in fertility by age between 1950 and 2017 in 195 countries and territories. Findings: From 1950 to 2017, TFRs decreased by 49·4% (95% uncertainty interval [UI] 46·4–52·0). The TFR decreased from 4·7 livebirths (4·5–4·9) to 2·4 livebirths (2·2–2·5), and the ASFR of mothers aged 10–19 years decreased from 37 livebirths (34–40) to 22 livebirths (19–24) per 1000 women. Despite reductions in the TFR, the global population has been increasing by an average of 83·8 million people per year since 1985. The global population increased by 197·2% (193·3–200·8) since 1950, from 2·6 billion (2·5–2·6) to 7·6 billion (7·4–7·9) people in 2017; much of this increase was in the proportion of the global population in south Asia and sub-Saharan Africa. The global annual rate of population growth increased between 1950 and 1964, when it peaked at 2·0%; this rate then remained nearly constant until 1970 and then decreased to 1·1% in 2017. Population growth rates in the southeast Asia, east Asia, and Oceania GBD super-region decreased from 2·5% in 1963 to 0·7% in 2017, whereas in sub-Saharan Africa, population growth rates were almost at the highest reported levels ever in 2017, when they were at 2·7%. The global average age increased from 26·6 years in 1950 to 32·1 years in 2017, and the proportion of the population that is of working age (age 15–64 years) increased from 59·9% to 65·3%. At the national level, the TFR decreased in all countries and territories between 1950 and 2017; in 2017, TFRs ranged from a low of 1·0 livebirths (95% UI 0·9–1·2) in Cyprus to a high of 7·1 livebirths (6·8–7·4) in Niger. The TFR under age 25 years (TFU25; number of livebirths expected by age 25 years for a hypothetical woman who survived the age group and was exposed to current ASFRs) in 2017 ranged from 0·08 livebirths (0·07–0·09) in South Korea to 2·4 livebirths (2·2–2·6) in Niger, and the TFR over age 30 years (TFO30; number of livebirths expected for a hypothetical woman ageing from 30 to 54 years who survived the age group and was exposed to current ASFRs) ranged from a low of 0·3 livebirths (0·3–0·4) in Puerto Rico to a high of 3·1 livebirths (3·0–3·2) in Niger. TFO30 was higher than TFU25 in 145 countries and territories in 2017. 33 countries had a negative population growth rate from 2010 to 2017, most of which were located in central, eastern, and western Europe, whereas population growth rates of more than 2·0% were seen in 33 of 46 countries in sub-Saharan Africa. In 2017, less than 65% of the national population was of working age in 12 of 34 high-income countries, and less than 50% of the national population was of working age in Mali, Chad, and Niger. Interpretation: Population trends create demographic dividends and headwinds (ie, economic benefits and detriments) that affect national economies and determine national planning needs. Although TFRs are decreasing, the global population continues to grow as mortality declines, with diverse patterns at the national level and across age groups. To our knowledge, this is the first study to provide transparent and replicable estimates of population and fertility, which can be used to inform decision making and to monitor progress. Funding: Bill & Melinda Gates Foundation.
|
|
| 10. |
- Samikannu, Rakesh, et al.
(author)
-
Lutidinium-Based Ionic Liquids for Efficient Dissolution of Cellulose
- 2019
-
In: New Journal of Chemistry. - : Royal Society of Chemistry. - 1144-0546 .- 1369-9261. ; 43:5, s. 2299-2306
-
Journal article (peer-reviewed)abstract
- Herein, we have studied the potential of lutidinium-based ILs (1-allyl-3,5-dimethylpyridinium chloride [3,5-ADMPy]Cl and 1-allyl-3,4-dimethylpyridinium chloride [3,4-ADMPy]Cl) in the dissolution of cellulose, and their structures were confirmed by 1H and 13C NMR spectra, respectively. [3,5-ADMPy]Cl exhibited the highest capacity in cellulose dissolution. In fact, it dissolved 20 wt% of cellulose within 12 min and 26 wt% of cellulose in 35 min at 118 °C. The crystallinity and morphology of native and regenerated cellulose were characterised by X-ray diffraction (XRD), scanning electron microscopy (SEM) and CP/MAS 13C NMR spectroscopy. These techniques clearly suggest that the crystallinity of cellulose is reduced upon treatment in lutidinium-based ILs. The thermogravimetric analysis (TGA) showed that regenerated cellulose had thermal stability close to that of native cellulose.
|
|
