| 1. |
- Yanez, Marianna, et al.
(författare)
-
Molecular recognition of nucleic acids by nucleolipid/dendrimer surface complexes.
- 2014
-
Ingår i: Soft Matter. - : Royal Society of Chemistry (RSC). - 1744-6848 .- 1744-683X. ; 10:42, s. 8401-8405
-
Tidskriftsartikel (refereegranskat)abstract
- We show for the first time that 1,2-dilauroyl-sn-glycero-3-phosphatidyladenosine nucleolipid surface complexes with cationic poly(amidoamine) dendrimers can be used to selectively bind DNA including oligonucleotides. This molecular recognition has high potential for applications involving biomedical and bioanalytic devices as well as drug delivery systems based on nucleic acids.
|
|
| 2. |
- Yanez, Marianna, et al.
(författare)
-
On the formation of dendrimer/nucleolipids surface films for directed self-assembly.
- 2015
-
Ingår i: Soft Matter. - : Royal Society of Chemistry (RSC). - 1744-6848 .- 1744-683X. ; 11:10, s. 1973-1990
-
Tidskriftsartikel (refereegranskat)abstract
- We describe the formation and structure of nucleolipid/dendrimer multilayer films controlled by non-covalent interactions to obtain biomaterials that exhibit molecular recognition of nucleic acids. Layers of cationic poly(amidoamine) (PAMAM) dendrimers of generation 4 and the anionic nucleolipids 1,2-dilauroyl-sn-glycero-3-phosphatidylnucleosides (DLPNs) based on uridine (DLPU) and adenosine (DLPA) were first formed at the silica-water interface. The PAMAM/DLPN layers were then exposed to short oligonucleotides, polynucleotides and single stranded DNA (ssDNA). The interfacial properties were characterized using quartz crystal microbalance with dissipation monitoring, attenuated total reflection Fourier transform infrared spectroscopy and neutron reflectometry. Both types of DLPN were found to adsorb as aggregates to preadsorbed PAMAM monolayers with a similar interfacial structure and composition before rinsing with pure aqueous solution. Nucleic acids were found to interact with PAMAM/DLPA layers due to base pairing interactions, while the PAMAM/DLPU layers did not have the same capability. This was attributed to the structure of the DLPA layer, which is formed by aggregates that extend from the interface towards the bulk after rinsing with pure solvent, while the DLPU layer forms compact structures. In complementary experiments using a different protocol, premixed PAMAM/DLPN samples adsorbed to hydrophilic silica only when the mixtures contained positively charged aggregates, which is rationalized in terms of electrostatic forces. The PAMAM/DLPA layers formed from the adsorption of these mixtures also bind ssDNA although in this case the adsorption is mediated by the opposite charges of the film and the nucleic acid rather than specific base pairing. The observed molecular recognition of nucleic acids by dendrimers functionalized via non-covalent interactions with nucleolipids is discussed in terms of biomedical applications such as gene vectors and biosensors.
|
|
| 3. |
- Caselli, Lucrezia, et al.
(författare)
-
Boosting Membrane Interactions and Antimicrobial Effects of Photocatalytic Titanium Dioxide Nanoparticles by Peptide Coating
- 2024
-
Ingår i: Small. - : John Wiley and Sons Inc. - 1613-6810 .- 1613-6829.
-
Tidskriftsartikel (refereegranskat)abstract
- Photocatalytic nanoparticles offer antimicrobial effects under illumination due to the formation of reactive oxygen species (ROS), capable of degrading bacterial membranes. ROS may, however, also degrade human cell membranes and trigger toxicity. Since antimicrobial peptides (AMPs) may display excellent selectivity between human cells and bacteria, these may offer opportunities to effectively “target” nanoparticles to bacterial membranes for increased selectivity. Investigating this, photocatalytic TiO2 nanoparticles (NPs) are coated with the AMP LL-37, and ROS generation is found by C11-BODIPY to be essentially unaffected after AMP coating. Furthermore, peptide-coated TiO2 NPs retain their positive ζ-potential also after 1–2 h of UV illumination, showing peptide degradation to be sufficiently limited to allow peptide-mediated targeting. In line with this, quartz crystal microbalance measurements show peptide coating to promote membrane binding of TiO2 NPs, particularly so for bacteria-like anionic and cholesterol-void membranes. As a result, membrane degradation during illumination is strongly promoted for such membranes, but not so for mammalian-like membranes. The mechanisms of these effects are elucidated by neutron reflectometry. Analogously, LL-37 coating promoted membrane rupture by TiO2 NPs for Gram-negative and Gram-positive bacteria, but not for human monocytes. These findings demonstrate that AMP coating may selectively boost the antimicrobial effects of photocatalytic NPs. © 2024 The Authors.
|
|
| 4. |
- Kamata, Yohei, et al.
(författare)
-
Hydration and Ordering of Lamellar Block Copolymer Films under Controlled Water Vapor
- 2014
-
Ingår i: Macromolecules. - : American Chemical Society (ACS). - 0024-9297 .- 1520-5835. ; 47:24, s. 8682-8690
-
Tidskriftsartikel (refereegranskat)abstract
- Amphiphilic block copolymers within a range of volume fraction spontaneously form vesicles in aqueous solution, where a water core is enclosed by a polymer bilayer. Thin-film rehydration is a method used to produce vesicles routinely; a thin film is immersed in water, the film swells, and vesicles are formed which bleb off from the film surface. We have studied the early stages of hydration for PEOPBO block copolymer thin films under controlled water vapor conditions to understand this formation mechanism and so enable more efficient ways to encapsulate molecules using this method. Neutron and X-ray measurements show that the initial film exhibits weakly ordered structure with isotropic parallel and vertical orientation; the films initially swell and maintain the same orientation. At a critical point the layer swells rapidly and makes highly ordered lamellae structure at the same time. The lamellae are almost exclusively oriented parallel to the substrate and swell with increasing water absorption.
|
|
| 5. |
- Waldie, Sarah, et al.
(författare)
-
Lipoprotein ability to exchange and remove lipids from model membranes as a function of fatty acid saturation and presence of cholesterol.
- 2020
-
Ingår i: Biochimica et Biophysica Acta - Molecular and Cell Biology of Lipids. - : Elsevier. - 1388-1981 .- 1879-2618. ; 1865:10
-
Tidskriftsartikel (refereegranskat)abstract
- Lipoproteins play a central role in the development of atherosclerosis. High and low-density lipoproteins (HDL and LDL), known as 'good' and 'bad' cholesterol, respectively, remove and/or deposit lipids into the artery wall. Hence, insight into lipid exchange processes between lipoproteins and cell membranes is of particular importance in understanding the onset and development of cardiovascular disease. In order to elucidate the impact of phospholipid tail saturation and the presence of cholesterol in cell membranes on these processes, neutron reflection was employed in the present investigation to follow lipid exchange with both HDL and LDL against model membranes. Mirroring clinical risk factors for the development of atherosclerosis, lower exchange was observed in the presence of cholesterol, as well as for an unsaturated phospholipid, compared to faster exchange when using a fully saturated phospholipid. These results highlight the importance of membrane composition on the interaction with lipoproteins, chiefly the saturation level of the lipids and presence of cholesterol, and provide novel insight into factors of importance for build-up and reversibility of atherosclerotic plaque. In addition, the correlation between the results and well-established clinical risk factors suggests that the approach taken can be employed also for understanding a broader set of risk factors including, e.g., effects of triglycerides and oxidative stress, as well as local effects of drugs on atherosclerotic plaque formation.
|
|
| 6. |
- Dabkowska, Aleksandra P., et al.
(författare)
-
Non-lamellar lipid assembly at interfaces : controlling layer structure by responsive nanogel particles
- 2017
-
Ingår i: Interface Focus. - : ROYAL SOC. - 2042-8898 .- 2042-8901. ; 7:4
-
Tidskriftsartikel (refereegranskat)abstract
- Biological membranes do not only occur as planar bilayer structures, but depending on the lipid composition, can also curve into intriguing three-dimensional structures. In order to fully understand the biological implications as well as to reveal the full potential for applications, e.g. for drug delivery and other biomedical devices, of such structures, well-defined model systems are required. Here, we discuss the formation of lipid non-lamellar liquid crystalline (LC) surface layers spin-coated from the constituting lipids followed by hydration of the lipid layer. We demonstrate that hybrid lipid polymer films can be formed with different properties compared with the neat lipid LC layers. The nanostructure and morphologies of the lipid films formed reflect those in the bulk. Most notably, mixed lipid layers, which are composed of glycerol monooleate and diglycerol monooleate with poly(N-isopropylacrylamide) nanogels, can form films of reverse cubic phases that are capable of responding to temperature stimulus. Owing to the presence of the nanogel particles, changing the temperature not only regulates the hydration of the cubic phase lipid films, but also the lateral organization of the lipid domains within the lipid self-assembled film. This opens up the possibility for new nanostructured materials based on lipid-polymer responsive layers.
|
|
| 7. |
- Del Giudice, Alessandra, et al.
(författare)
-
Towards natural care products : Structural and deposition studies of bio-based polymer and surfactant mixtures
- 2024
-
Ingår i: Colloids and Surfaces A: Physicochemical and Engineering Aspects. - 0927-7757. ; 698
-
Tidskriftsartikel (refereegranskat)abstract
- Oppositely charged polymer-surfactant systems are expected to interact with formation of coacervate complexes near composition of charge-neutrality. Such behaviour is widely used in formulated products (e.g. household and personal care), where the co-deposition of coacervates and active ingredients on various surfaces is triggered by dilution. A transition towards the use of more sustainable ingredients is currently ongoing as a response to the need of more environmentally conscious choices in production, albeit slowed down by the often more complex and not fully understood bulk and interfacial behaviour of new ingredients. In this work, mixtures of a medium-chain fatty acid (sodium decanoate) and two grades of bio-based cationic modified inulin were studied. The phase behaviour was determined in a wide composition matrix. The formation of coacervate complexes was observed for the mixture with the higher charge density polymer at a surfactant concentration of 1–3 wt%, close to the surfactant critical micellar concentration in pure water. Such behaviour was confirmed by DLS and SAXS data, suggesting surfactant-polymer complexation in a concentrated phase of packed micelles with a micelle-to-micelle distance of ∼4.5 nm. In situ ellipsometry and neutron reflectometry experiments were conducted to study the effect on surface deposition when diluting. The ellipsometry showed an adsorbed mass of ∼1.3–1.9 mg/m2, consistent with the deposition of a coacervate layer, and considerably higher than the neat, adsorbed polymer layer of ∼0.3 mg/m2. In the case of the neutron reflectometry experiments, dilution was performed before contact with the surface (pre-mixing), and no adsorption of coacervates was observed, but rather the adsorption of a polymer layer (0.49–0.85 mg/m2). The different results obtained with the different techniques highlight the kinetic nature of bulk coacervate formation and deposition, and the competition between these two phenomena. Maximal deposition can be achieved if one can control this time window either by tuning the composition of the system or the experimental set-up, to mimic the conditions of a specific application.
|
|
| 8. |
- Gilbert, Jennifer, et al.
(författare)
-
On the interactions between RNA and titrateable lipid layers: implications for RNA delivery with lipid nanoparticles
- 2023
-
Ingår i: Nanoscale. - 2040-3372 .- 2040-3364. ; 16:2, s. 777-794
-
Tidskriftsartikel (refereegranskat)abstract
- Characterising the interaction between cationic ionisable lipids (CIL) and nucleic acids (NAs) is key to understanding the process of RNA lipid nanoparticle (LNP) formation and release of NAs from LNPs. Here, we have used different surface techniques to reveal the effect of pH and NA type on the interaction with a model system of DOPC and the CIL DLin-MC3-DMA (MC3). At only 5% MC3, differences in the structure and dynamics of the lipid layer were observed. Both pH and %MC3 were shown to affect the absorption behaviour of erythropoietin mRNA, polyadenylic acid (polyA) and polyuridylic acid (polyU). The adsorbed amount of all studied NAs was found to increase with decreasing pH and increasing %MC3 but with different effects on the lipid layer, which could be linked to the NA secondary structure. For polyA at pH 6, adsorption to the surface of the layer was observed, whereas for other conditions and NAs, penetration of the NA into the layer resulted in the formation of a multilayer structure. By comparison to simulations excluding the secondary structure, differences in adsorption behaviours between polyA and polyU could be observed, indicating that the NA's secondary structure also affected the MC3-NA interactions.
|
|
| 9. |
- Hemming, Joanna M., et al.
(författare)
-
Changes to lung surfactant monolayers upon exposure to gas phase ozone observed using X-ray and neutron reflectivity
- 2022
-
Ingår i: Environmental Science. - : Royal Society of Chemistry. - 2634-3606. ; 2:4, s. 753-760
-
Tidskriftsartikel (refereegranskat)abstract
- Exposure to the secondary pollutant ozone in ambient air is associated with adverse health effects when inhaled. In this work we use surface pressure measurements, combined with X-ray and neutron reflection, to observe changes in a layer of lung surfactant at the air water interface when exposed to gas phase ozone. The results demonstrate that the layer reacts with ozone changing its physical characteristics. A slight loss of material, a significant thinning of the layer and increased hydration of the surfactant material is observed. The results support the hypothesis that unsaturated lipids present in lung surfactant are still susceptible to rapid reaction with ozone and the reaction changes the properties of the interfacial layer.
|
|
| 10. |
- Häffner, Sara Malekkhaiat, et al.
(författare)
-
Membrane Interactions of Virus-like Mesoporous Silica Nanoparticles
- 2021
-
Ingår i: ACS Nano. - : American Chemical Society (ACS). - 1936-0851 .- 1936-086X. ; 15:4, s. 6787-6800
-
Tidskriftsartikel (refereegranskat)abstract
- In the present study, we investigated lipid membrane interactions of silica nanoparticles as carriers for the antimicrobial peptide LL-37 (LLGDFFRKSKEKIGKEFKRIVQRIKDFLRNLVPRTES). In doing so, smooth mesoporous nanoparticles were compared to virus-like mesoporous nanoparticles, characterized by a "spiky"external surface, as well as to nonporous silica nanoparticles. For this, we employed a combination of neutron reflectometry, ellipsometry, dynamic light scattering, and ζ-potential measurements for studies of bacteria-mimicking bilayers formed by palmitoyloleoylphosphatidylcholine/palmitoyloleoylphosphatidylglycerol. The results show that nanoparticle topography strongly influences membrane binding and destabilization. We found that virus-like particles are able to destabilize such lipid membranes, whereas the corresponding smooth silica nanoparticles are not. This effect of particle spikes becomes further accentuated after loading of such particles with LL-37. Thus, peptide-loaded virus-like nanoparticles displayed more pronounced membrane disruption than either peptide-loaded smooth nanoparticles or free LL-37. The structural basis of this was clarified by neutron reflectometry, demonstrating that the virus-like nanoparticles induce trans-membrane defects and promote incorporation of LL-37 throughout both bilayer leaflets. The relevance of such effects of particle spikes for bacterial membrane rupture was further demonstrated by confocal microscopy and live/dead assays on Escherichia coli bacteria. Taken together, these findings demonstrate that topography influences the interaction of nanoparticles with bacteria-mimicking lipid bilayers, both in the absence and presence of antimicrobial peptides, as well as with bacteria. The results also identify virus-like mesoporous nanoparticles as being of interest in the design of nanoparticles as delivery systems for antimicrobial peptides.
|
|
| 11. |
- Lind, Tania Kjellerup, et al.
(författare)
-
Formation and Characterization of Supported Lipid Bilayers Composed of Phosphatidylethanolamine and Phosphatidylglycerol by Vesicle Fusion, a Simple but Relevant Model for Bacterial Membranes
- 2019
-
Ingår i: ACS Omega. - : American Chemical Society (ACS). - 2470-1343. ; 4:6, s. 10687-10694
-
Tidskriftsartikel (refereegranskat)abstract
- Supported lipid bilayers (SLBs) are simple and robust biomimics with controlled lipid composition that are widely used as models of both mammalian and bacterial membranes. However, the lipids typically used for SLB formation poorly resemble those of bacterial cell membranes due to the lack of available protocols to form SLBs using mixtures of lipids relevant for bacteria such as phosphatidylethanolamine (PE) and phosphatidylglycerol (PG). Although a few reports have been published recently on the formation of SLBs from Escherichia coli lipid extracts, a detailed understanding of these systems is challenging due to the complexity of the lipid composition in such natural extracts. Here, we present for the first time a simple and reliable protocol optimized to form high-quality SLBs using mixtures of PE and PG at compositions relevant for Gram-negative membranes. We show using neutron reflection and quartz microbalance not only that Ca2+ ions and temperature are key parameters for successful bilayer deposition but also that mass transfer to the surface is a limiting factor. Continuous flow of the lipid suspension is thus crucial for obtaining full SLB coverage. We furthermore characterize the resulting bilayers and report structural parameters, for the first time for PE and PG mixtures, which are in good agreement with those reported earlier for pure POPE vesicles. With this protocol in place, more suitable and reproducible studies can be conducted to understand biomolecular processes occurring at cell membranes, for example, for testing specificities and to unravel the mechanism of interaction of antimicrobial peptides.
|
|
| 12. |
- Nielsen, Josefine Eilsø, et al.
(författare)
-
Lipid membrane interactions of self-assembling antimicrobial nanofibers : effect of PEGylation
- 2020
-
Ingår i: RSC Advances. - : Royal Society of Chemistry. - 2046-2069. ; 10, s. 35329-35340
-
Tidskriftsartikel (refereegranskat)abstract
- Supramolecular assembly and PEGylation (attachment of a polyethylene glycol polymer chain) of peptides can be an effective strategy to develop antimicrobial peptides with increased stability, antimicrobial efficacy and hemocompatibility. However, how the self-assembly properties and PEGylation affect their lipid membrane interaction is still an unanswered question. In this work, we use state-of-the-art small angle X-ray and neutron scattering (SAXS/SANS) together with neutron reflectometry (NR) to study the membrane interaction of a series of multidomain peptides, with and without PEGylation, known to self-assemble into nanofibers. Our approach allows us to study both how the structure of the peptide and the membrane are affected by the peptide–lipid interactions. When comparing self-assembled peptides with monomeric peptides that are not able to undergo assembly due to shorter chain length, we found that the nanofibers interact more strongly with the membrane. They were found to insert into the core of the membrane as well as to absorb as intact fibres on the surface. Based on the presented results, PEGylation of the multidomain peptides leads to a slight net decrease in the membrane interaction, while the distribution of the peptide at the interface is similar to the non-PEGylated peptides. Based on the structural information, we showed that nanofibers were partially disrupted upon interaction with phospholipid membranes. This is in contrast with the considerable physical stability of the peptide in solution, which is desirable for an extended in vivo circulation time.
|
|
| 13. |
- Nouhi, Shirin, et al.
(författare)
-
Sticking particles to solid surfaces using Moringa oleifera proteins as a glue
- 2018
-
Ingår i: Colloids and Surfaces B: Biointerfaces. - : Elsevier BV. - 0927-7765 .- 1873-4367. ; 168, s. 68-75
-
Tidskriftsartikel (refereegranskat)abstract
- Experimental studies have been made to test the idea that seed proteins from Moringa oleifera which are novel, natural flocculating agents for many particles could be used to promote adhesion at planar interfaces and hence provide routes to useful nanostructures. The proteins bind irreversibly to silica interfaces. Surfaces that had been exposed to protein solutions and rinsed were then exposed to dispersions of sulfonated polystyrene latex. Atomic force microscopy was used to count particle density and identified that the sticking probability was close to 1. Measurements with a quartz crystal microbalance confirmed the adhesion and indicated that repeated exposures to solutions of Moringa seed protein and particles increased the coverage. Neutron reflectivity and scattering experiments indicate that particles bind as a monolayer. The various results show that the 2S albumin seed protein can be used to fix particles at interfaces and suggest routes for future developments in making active filters or improved interfaces for photonic devices.
|
|
| 14. |
- Parra-Ortiz, Elisa, et al.
(författare)
-
Mesoporous silica as a matrix for photocatalytic titanium dioxide nanoparticles : lipid membrane interactions
- 2022
-
Ingår i: Nanoscale. - : Royal Society of Chemistry (RSC). - 2040-3364 .- 2040-3372. ; 14:34, s. 12297-12312
-
Tidskriftsartikel (refereegranskat)abstract
- In the present study, we investigate the combined interaction of mesoporous silica (SiO2) and photocatalytic titanium dioxide (TiO2) nanoparticles with lipid membranes, using neutron reflectometry (NR), cryo-transmission electron microscopy (cryo-TEM), fluorescence oxidation assays, dynamic light scattering (DLS), and ζ-potential measurements. Based on DLS, TiO2 nanoparticles were found to display strongly improved colloidal stability at physiological pH of skin (pH 5.4) after incorporation into either smooth or spiky (“virus-like”) mesoporous silica nanoparticles at low pH, the latter demonstrated by cryo-TEM. At the same time, such matrix-bound TiO2 nanoparticles retain their ability to destabilize anionic bacteria-mimicking lipid membranes under UV-illumination. Quenching experiments indicated both hydroxyl and superoxide radicals to contribute to this, while NR showed that free TiO2 nanoparticles and TiO2 loaded into mesoporous silica nanoparticles induced comparable effects on supported lipid membranes, including membrane thinning, lipid removal, and formation of a partially disordered outer membrane leaflet. By comparing effects for smooth and virus-like mesoporous nanoparticles as matrices for TiO2 nanoparticles, the interplay between photocatalytic and direct membrane binding effects were elucidated. Taken together, the study outlines how photocatalytic nanoparticles can be readily incorporated into mesoporous silica nanoparticles for increased colloidal stability and yet retain most of their capacity for photocatalytic destabilization of lipid membranes, and with maintained mechanisms for oxidative membrane destabilization. As such, the study provides new mechanistic information to the widely employed, but poorly understood, practice of loading photocatalytic nanomaterials onto/into matrix materials for increased performance.
|
|
| 15. |
- Parra-Ortiz, Elisa, et al.
(författare)
-
Oxidation of Polyunsaturated Lipid Membranes by Photocatalytic Titanium Dioxide Nanoparticles : Role of pH and Salinity
- 2020
-
Ingår i: ACS Applied Materials and Interfaces. - : American Chemical Society (ACS). - 1944-8244 .- 1944-8252. ; 12:29, s. 32446-32460
-
Tidskriftsartikel (refereegranskat)abstract
- In the present study, UV-induced membrane destabilization by TiO2 (anatase) nanoparticles was investigated by neutron reflectometry (NR), small-angle X-ray scattering (SAXS), quartz crystal microbalance with dissipation (QCM-D), dynamic light scattering (DLS), and ζ-potential measurements for phospholipid bilayers formed by zwitterionic palmitoyloleoylphosphatidylcholine (POPC) containing biologically relevant polyunsaturations. TiO2 nanoparticles displayed pH-dependent binding to such bilayers. Nanoparticle binding alone, however, has virtually no destabilizing effects on the lipid bilayers. In contrast, UV illumination in the presence of TiO2 nanoparticles activates membrane destabilization as a result of lipid oxidation caused by the generation of reactive oxygen species (ROS), primarily •OH radicals. Despite the short diffusion length characterizing these, the direct bilayer attachment of TiO2 nanoparticles was demonstrated to not be a sufficient criterion for an efficient UV-induced oxidation of bilayer lipids, the latter also depending on ROS generation in bulk solution. From SAXS and NR, minor structural changes were seen when TiO2 was added in the absence of UV exposure, or on UV exposure in the absence of TiO2 nanoparticles. In contrast, UV exposure in the presence of TiO2 nanoparticles caused large-scale structural transformations, especially at high ionic strength, including gradual bilayer thinning, lateral phase separation, increases in hydration, lipid removal, and potential solubilization into aggregates. Taken together, the results demonstrate that nanoparticle-membrane interactions ROS generation at different solution conditions act in concert to induce lipid membrane destabilization on UV exposure and that both of these need to be considered for understanding the performance of UV-triggered TiO2 nanoparticles in nanomedicine.
|
|
| 16. |
- Raasakka, Arne, et al.
(författare)
-
Neuropathy-related mutations alter the membrane binding properties of the human myelin protein P0 cytoplasmic tail
- 2019
-
Ingår i: PLoS ONE. - : Public Library of Science (PLoS). - 1932-6203. ; 14:6
-
Tidskriftsartikel (refereegranskat)abstract
- Schwann cells myelinate selected axons in the peripheral nervous system (PNS) and contribute to fast saltatory conduction via the formation of compact myelin, in which water is excluded from between tightly adhered lipid bilayers. Peripheral neuropathies, such as Charcot-Marie-Tooth disease (CMT) and Dejerine-Sottas syndrome (DSS), are incurable demyelinating conditions that result in pain, decrease in muscle mass, and functional impairment. Many Schwann cell proteins, which are directly involved in the stability of compact myelin or its development, are subject to mutations linked to these neuropathies. The most abundant PNS myelin protein is protein zero (P0); point mutations in this transmembrane protein cause CMT subtype 1B and DSS. P0 tethers apposing lipid bilayers together through its extracellular immunoglobulin-like domain. Additionally, P0 contains a cytoplasmic tail (P0ct), which is membrane-associated and contributes to the physical properties of the lipid membrane. Six CMT- and DSS-associated missense mutations have been reported in P0ct. We generated recombinant disease mutant variants of P0ct and characterized them using biophysical methods. Compared to wild-type P0ct, some mutants have negligible differences in function and folding, while others highlight functionally important amino acids within P0ct. For example, the D224Y variant of P0ct induced tight membrane multilayer stacking. Our results show a putative molecular basis for the hypermyelinating phenotype observed in patients with this particular mutation and provide overall information on the effects of disease-linked mutations in a flexible, membrane-binding protein segment. Using neutron reflectometry, we additionally show that P0ct embeds deep into a lipid bilayer, explaining the observed effects of P0ct on the physical properties of the membrane.
|
|
| 17. |
- Shepherd, Rosalie H., et al.
(författare)
-
Measurement of gas-phase OH radical oxidation and film thickness of organic films at the air-water interface using material extracted from urban, remote and wood smoke aerosol
- 2022
-
Ingår i: Environmental Science. - : Royal Society of Chemistry (RSC). - 2634-3606. ; 2:4, s. 574-590
-
Tidskriftsartikel (refereegranskat)abstract
- The presence of an organic film on a cloud droplet or aqueous aerosol particle has the potential to alter the chemical, optical and physical properties of the droplet or particle. In the study presented, water insoluble organic materials extracted from urban, remote (Antarctica) and wood burning atmospheric aerosol were found to have stable, compressible, films at the air-water interface that were typically similar to 6-18 angstrom thick. These films are reactive towards gas-phase OH radicals and decay exponentially, with bimolecular rate constants for reaction with gas-phase OH radicals of typically 0.08-1.5 x 10(-10) cm(3) molecule(-1) s(-1). These bimolecular rate constants equate to initial OH radical uptake coefficients estimated to be similar to 0.6-1 except woodsmoke (similar to 0.05). The film thickness and the neutron scattering length density of the extracted atmosphere aerosol material (from urban, remote and wood burning) were measured by neutron reflection as they were exposed to OH radicals. For the first time neutron reflection has been demonstrated as an excellent technique for studying the thin films formed at air-water interfaces from materials extracted from atmospheric aerosol samples. Additionally, the kinetics of gas-phase OH radicals with a proxy compound, the lipid 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC) was studied displaying significantly different behaviour, thus demonstrating it is not a good proxy for atmospheric materials that may form films at the air-water interface. The atmospheric lifetimes, with respect to OH radical oxidation, of the insoluble organic materials extracted from atmospheric aerosol at the air-water interface were a few hours. Relative to a possible physical atmospheric lifetime of 4 days, the oxidation of these films is important and needs inclusion in atmospheric models. The optical properties of these films were previously reported [Shepherd et al., Atmos. Chem. Phys., 2018, 18, 5235-5252] and there is a significant change in top of the atmosphere albedo for these thin films on core-shell atmospheric aerosol using the film thickness data and confirmation of stable film formation at the air-water interface presented here.
|
|
| 18. |
- Wadsäter, Maria, et al.
(författare)
-
Structural effects of the dispersing agent polysorbate 80 on liquid crystalline nanoparticles of soy phosphatidylcholine and glycerol dioleate
- 2015
-
Ingår i: Soft Matter. - : Royal Society of Chemistry. - 1744-683X .- 1744-6848. ; 11:6, s. 1140-1150
-
Tidskriftsartikel (refereegranskat)abstract
- Well-defined, stable and highly structured I-2 (Fd (3) over barm) liquid crystalline nanoparticles (LCNP) of 50/50 (wt/wt) soy phosphatidylcholine (SPC)/glycerol dioleate (GDO), can be formed by using a low fraction (5-10 wt%) of the dispersing polymeric surfactant polyoxyethylene (20) sorbitan monooleate (polysorbate 80 or P80). In the present study we used small angle neutron scattering (SANS) and deuterated P80 (d-P80) to determine the location and concentration of P80 within the LCNP and small angle X-ray scattering (SAXS) to reveal the internal structure. SANS data suggests that some d-P80 already penetrates the particle core at 5%. However, the content of d-P80 is still low enough not to significantly change the internal Fd (3) over barm structure of the LCNP. At higher fractions of P80 a phase separation occurs, in which a SPC and P80 rich phase is formed at the particle surface. The surface layer becomes gradually richer in both solvent and d-P80 when the surfactant concentration is increased from 5 to 15%, while the core of the particle is enriched by GDO, resulting in loss of internal structure and reduced hydration. We have used neutron reflectometry to reveal the location of the stabiliser within the adsorbed layer on an anionic silica and cationic (aminopropyltriethoxysilane (APTES) silanized) surface. d-P80 is enriched closest to the supporting surface and slightly more so for the cationic APTES surface. The results are relevant not only for the capability of LCNPs as drug delivery vehicles but also as means of preparing functional surface coatings.
|
|
