| 1. |
- Aad, G., et al.
(författare)
-
- 2010
-
swepub:Mat__t
|
|
| 2. |
- Aad, G., et al.
(författare)
-
- 2011
-
swepub:Mat__t
|
|
| 3. |
|
|
| 4. |
- Aad, G., et al.
(författare)
-
- 2010
-
swepub:Mat__t
|
|
| 5. |
- Aad, G., et al.
(författare)
-
- 2010
-
swepub:Mat__t
|
|
| 6. |
- Aad, G., et al.
(författare)
-
- 2010
-
swepub:Mat__t
|
|
| 7. |
|
|
| 8. |
|
|
| 9. |
- Aad, G., et al.
(författare)
-
Readiness of the ATLAS Tile Calorimeter for LHC collisions
- 2010
-
Ingår i: European Physical Journal C. Particles and Fields. - : Springer Science and Business Media LLC. - 1434-6044 .- 1434-6052. ; 70:4, s. 1193-1236
-
Tidskriftsartikel (refereegranskat)abstract
- The Tile hadronic calorimeter of the ATLAS detector has undergone extensive testing in the experimental hall since its installation in late 2005. The readout, control and calibration systems have been fully operational since 2007 and the detector has successfully collected data from the LHC single beams in 2008 and first collisions in 2009. This paper gives an overview of the Tile Calorimeter performance as measured using random triggers, calibration data, data from cosmic ray muons and single beam data. The detector operation status, noise characteristics and performance of the calibration systems are presented, as well as the validation of the timing and energy calibration carried out with minimum ionising cosmic ray muons data. The calibration systems' precision is well below the design value of 1%. The determination of the global energy scale was performed with an uncertainty of 4%.
|
|
| 10. |
- Aad, G., et al.
(författare)
-
The ATLAS Inner Detector commissioning and calibration
- 2010
-
Ingår i: European Physical Journal C. Particles and Fields. - : Springer Science and Business Media LLC. - 1434-6044 .- 1434-6052. ; 70:3, s. 787-821
-
Tidskriftsartikel (refereegranskat)abstract
- The ATLAS Inner Detector is a composite tracking system consisting of silicon pixels, silicon strips and straw tubes in a 2 T magnetic field. Its installation was completed in August 2008 and the detector took part in data-taking with single LHC beams and cosmic rays. The initial detector operation, hardware commissioning and in-situ calibrations are described. Tracking performance has been measured with 7.6 million cosmic-ray events, collected using a tracking trigger and reconstructed with modular pattern-recognition and fitting software. The intrinsic hit efficiency and tracking trigger efficiencies are close to 100%. Lorentz angle measurements for both electrons and holes, specific energy-loss calibration and transition radiation turn-on measurements have been performed. Different alignment techniques have been used to reconstruct the detector geometry. After the initial alignment, a transverse impact parameter resolution of 22.1 +/- 0.9 mu m and a relative momentum resolution sigma (p) /p=(4.83 +/- 0.16)x10(-4) GeV(-1)xp (T) have been measured for high momentum tracks.
|
|
| 11. |
- Aad, G., et al.
(författare)
-
The ATLAS Simulation Infrastructure
- 2010
-
Ingår i: European Physical Journal C. Particles and Fields. - : Springer Science and Business Media LLC. - 1434-6044 .- 1434-6052. ; 70:3, s. 823-874
-
Tidskriftsartikel (refereegranskat)abstract
- The simulation software for the ATLAS Experiment at the Large Hadron Collider is being used for large-scale production of events on the LHC Computing Grid. This simulation requires many components, from the generators that simulate particle collisions, through packages simulating the response of the various detectors and triggers. All of these components come together under the ATLAS simulation infrastructure. In this paper, that infrastructure is discussed, including that supporting the detector description, interfacing the event generation, and combining the GEANT4 simulation of the response of the individual detectors. Also described are the tools allowing the software validation, performance testing, and the validation of the simulated output against known physics processes.
|
|
| 12. |
- Abolins, M., et al.
(författare)
-
The ATLAS Data Acquisition and High Level Trigger system
- 2016
-
Ingår i: Journal of Instrumentation. - 1748-0221. ; 11
-
Tidskriftsartikel (refereegranskat)abstract
- This paper describes the data acquisition and high level trigger system of the ATLAS experiment at the Large Hadron Collider at CERN, as deployed during Run 1. Data flow as well as control, configuration and monitoring aspects are addressed. An overview of the functionality of the system and of its performance is presented and design choices are discussed.
|
|
| 13. |
- Abat, E., et al.
(författare)
-
A layer correlation technique for pion energy calibration at the 2004 ATLAS Combined Beam Test
- 2011
-
Ingår i: Journal of Instrumentation. - : Institute of Physics (IOP). - 1748-0221. ; 6
-
Tidskriftsartikel (refereegranskat)abstract
- A new method for calibrating the hadron response of a segmented calorimeter is developed and successfully applied to beam test data. It is based on a principal component analysis of energy deposits in the calorimeter layers, exploiting longitudinal shower development information to improve the measured energy resolution. Corrections for invisible hadronic energy and energy lost in dead material in front of and between the calorimeters of the ATLAS experiment were calculated with simulated Geant4 Monte Carlo events and used to reconstruct the energy of pions impinging on the calorimeters during the 2004 Barrel Combined Beam Test at the CERN H8 area. For pion beams with energies between 20 GeV and 180 GeV, the particle energy is reconstructed within 3% and the energy resolution is improved by between 11% and 25% compared to the resolution at the electromagnetic scale.
|
|
| 14. |
- Abat, E., et al.
(författare)
-
Combined performance studies for electrons at the 2004 ATLAS combined test-beam
- 2010
-
Ingår i: Journal of Instrumentation. - : Institute of Physics (IOP). - 1748-0221. ; 5, s. P11006-
-
Tidskriftsartikel (refereegranskat)abstract
- In 2004 at the ATLAS (A Toroidal LHC ApparatuS) combined test beam, one slice of the ATLAS barrel detector (including an Inner Detector set-up and the Liquid Argon calorimeter) was exposed to particles from the H8 SPS beam line at CERN. It was the first occasion to test the combined electron performance of ATLAS. This paper presents results obtained for the momentum measurement p with the Inner Detector and for the performance of the electron measurement with the LAr calorimeter (energy E linearity and resolution) in the presence of a magnetic field in the Inner Detector for momenta ranging from 20 GeV/c to 100 GeV/c. Furthermore the particle identification capabilities of the Transition Radiation Tracker, Bremsstrahlungs-recovery algorithms relying on the LAr calorimeter and results obtained for the E/p ratio and a way how to extract scale parameters will be discussed.
|
|
| 15. |
- Abat, E., et al.
(författare)
-
Photon reconstruction in the ATLAS Inner Detector and Liquid Argon Barrel Calorimeter at the 2004 Combined Test Beam
- 2011
-
Ingår i: Journal of Instrumentation. - 1748-0221. ; 6
-
Tidskriftsartikel (refereegranskat)abstract
- The reconstruction of photons in the ATLAS detector is studied with data taken during the 2004 Combined Test Beam, where a full slice of the ATLAS detector was exposed to beams of particles of known energy at the CERN SPS. The results presented show significant differences in the longitudinal development of the electromagnetic shower between converted and unconverted photons as well as in the total measured energy. The potential to use the reconstructed converted photons as a means to precisely map the material of the tracker in front of the electromagnetic calorimeter is also considered. All results obtained are compared with a detailed Monte-Carlo simulation of the test-beam setup which is based on the same simulation and reconstruction tools as those used for the ATLAS detector itself.
|
|
| 16. |
- Abat, E., et al.
(författare)
-
Study of the response of the ATLAS central calorimeter to pions of energies from 3 to 9 GeV
- 2009
-
Ingår i: Nuclear Instruments & Methods in Physics Research. Section A: Accelerators, Spectrometers, Detectors, and Associated Equipment. - : Elsevier BV. - 0167-5087 .- 0168-9002 .- 1872-9576. ; 607:2, s. 372-386
-
Tidskriftsartikel (refereegranskat)abstract
- A fully instrumented slice of the ATLAS central detector was exposed to test beams from the SPS (Super Proton Synchrotron) at CERN in 2004. in this paper, the response of the central calorimeters to pions with energies in the range between 3 and 9 GeV is presented. The linearity and the resolution of the combined calorimetry (electromagnetic and hadronic calorimeters) was measured and compared to the prediction of a detector simulation program using the toolkit Geant 4. (C) 2009 Elsevier B.V. All rights reserved.
|
|
| 17. |
- Abata, E., et al.
(författare)
-
Study of energy response and resolution of the ATLAS barrel calorimeter to hadrons of energies from 20 to 350 GeV
- 2010
-
Ingår i: Nuclear Instruments and Methods in Physics Research Section A. - : Elsevier. - 0168-9002 .- 1872-9576 .- 0167-5087. ; 621:1-3, s. 134-150
-
Tidskriftsartikel (refereegranskat)abstract
- A fully instrumented slice of the ATLAS detector was exposed to test beams from the SPS (Super Proton Synchrotron) at CERN in 2004. In this paper, the results of the measurements of the response of the barrel calorimeter to hadrons with energies in the range 20-350 GeV and beam impact points and angles corresponding to pseudo-rapidity values in the range 0.2-0.65 are reported. The results are compared to the predictions of a simulation program using the Geant 4 toolkit. (C) 2010 Published by Elsevier B.V.
|
|
| 18. |
|
|
| 19. |
- Proletov, Ian, et al.
(författare)
-
Primary and secondary glomerulonephritides 1.
- 2014
-
Ingår i: Nephrology, dialysis, transplantation : official publication of the European Dialysis and Transplant Association - European Renal Association. - : Oxford University Press (OUP). - 1460-2385. ; 29 Suppl 3:May, s. 186-200
-
Tidskriftsartikel (refereegranskat)
|
|
| 20. |
- Stancu, G. D., et al.
(författare)
-
Argon metastables in HiPIMS : Validation of the ionization region model by direct comparison to time resolved tunable diode-laser diagnostics
- 2015
-
Ingår i: Plasma sources science & technology. - : Institute of Physics Publishing (IOPP). - 0963-0252 .- 1361-6595. ; 24:4
-
Tidskriftsartikel (refereegranskat)abstract
- The volume plasma interactions of high power impulse magnetron sputtering (HiPIMS) discharges operated with a Ti target is analyzed in detail by combining time-resolved diagnostics with modeling of plasma kinetics. The model employed is the ionization region model (IRM) with an improved and detailed treatment of the kinetics of the argon metastable (Arm) state, called m-IRM. The diagnostics used is tunable diode-laser absorption spectroscopy (TD-LAS) of the Arm state, which gives the line-of-sight density integrated along the laser path parallel to the target surface. The TD-LAS recordings exhibit quite complex temporal evolutions Arm(t), with distinct features that are shown to reflect the time evolution of the plasma (the electron density and temperature), and of the argon gas (gas rarefaction and refill). The Arm(t) function is thus a tracer for the most important aspects of internal discharge physics, and therefore suitable for model testing and validation. The IRM model is constructed to be locked to obey specific experimental macroscopic discharge parameters, specifically the discharge current ID(t) and the voltage UD(t). It has to this purpose been run with the appropriate process gas pressures (from 0.67 to 2.67 Pa), with the experimentally applied voltage pulse profiles UD(t), and with the resulting current pulse profiles ID(t) (with maxima from 0.5 to 70 A). It is shown that the model reproduces the features in the TD-LAS measurements: both the Arm(t) evolution in single pulses, and how the pulse shapes change with gas pressure and with pulse amplitude. The good agreement between the measurements and model output is in this work taken to validate the basic assumptions of the m-IRM. In addition, the m-IRM results have been used to unravel the connections between volume plasma kinetics and various features recorded in the TD-LAS measurement, and to generalize the foremost characteristics of the studied discharges.
|
|
| 21. |
- Vitelaru, C., et al.
(författare)
-
Argon metastables in HiPIMS : time-resolved tunable diode-laser diagnostics
- 2012
-
Ingår i: Plasma sources science & technology. - : IOP Publishing. - 0963-0252 .- 1361-6595. ; 21:2, s. 025010-
-
Tidskriftsartikel (refereegranskat)abstract
- Time-resolved tunable diode-laser absorption spectroscopy measurements were performed on the argon metastable (Ar-m) level 3s(2)3p(5)(P-2(3/2)degrees)4s excited at 801.478 nm, in the dense plasma region in front of the magnetron target in a high power impulse magnetron sputtering (HiPIMS) discharge. From the Doppler profile the evolution of the temperature and density was derived during the pulse as well as during the plasma decay, i.e. in the afterglow. It is shown that the Ar-m density sharply increases at the beginning of the discharge pulse, followed by a severe Ar-m depletion along with increasing gas temperature around the peak of the HiPIMS discharge current. The strong dynamics of these parameters involve many elementary processes such as electron-impact excitation, electron-impact de-excitation and ionization of Ar-m, gas rarefaction, electron temperature increase at the end of the pulse and gas diffusion. These phenomena are discussed with respect to several parameters: distance from the target, peak discharge current during the pulse, pulse length, and gas pressure.
|
|
