| 1. |
|
|
| 2. |
|
|
| 3. |
- Heinonen, M., et al.
(författare)
-
New Primary Standards for Establishing SI Traceability for Moisture Measurements in Solid Materials
- 2018
-
Ingår i: International journal of thermophysics. - : Springer. - 0195-928X .- 1572-9567. ; 39
-
Tidskriftsartikel (refereegranskat)abstract
- A European research project METefnet addresses a fundamental obstacle to improving energy-intensive drying process control: due to ambiguous reference analysis methods and insufficient methods for estimating uncertainty in moisture measurements, the achievable accuracy in the past was limited and measurement uncertainties were largely unknown. This paper reports the developments in METefnet that provide a sound basis for the SI traceability: four new primary standards for realizing the water mass fraction were set up, analyzed and compared to each other. The operation of these standards is based on combining sample weighing with different water vapor detection techniques: cold trap, chilled mirror, electrolytic and coulometric Karl Fischer titration. The results show that an equivalence of 0.2 % has been achieved between the water mass fraction realizations and that the developed methods are applicable to a wide range of materials.
|
|
| 4. |
- Merlone, A., et al.
(författare)
-
The MeteoMet project - metrology for meteorology: challenges and results
- 2015
-
Ingår i: Meteorological Applications. - : Wiley. - 1350-4827 .- 1469-8080. ; 22, s. 820-829
-
Tidskriftsartikel (refereegranskat)abstract
- The study describes significant outcomes of the Metrology for Meteorology' project, MeteoMet, which is an attempt to bridge the meteorological and metrological communities. The concept of traceability, an idea used in both fields but with a subtle difference in meaning, is at the heart of the project. For meteorology, a traceable measurement is the one that can be traced back to a particular instrument, time and location. From a metrological perspective, traceability further implies that the measurement can be traced back to a primary realization of the quantity being measured in terms of the base units of the International System of Units, the SI. These two perspectives reflect long-standing differences in culture and practice and this project - and this study - represents only the first step towards better communication between the two communities. The 3 year MeteoMet project was funded by the European Metrology Research Program (EMRP) and involved 18 European National Metrological Institutes, 3 universities and 35 collaborating stakeholders including national meteorology organizations, research institutes, universities, associations and instrument companies. The project brought a metrological perspective to several long-standing measurement problems in meteorology and climatology, varying from conventional ground-based measurements to those made in the upper atmosphere. It included development and testing of novel instrumentation as well as improved calibration procedures and facilities, instrument intercomparison under realistic conditions and best practice dissemination. Additionally, the validation of historical temperature data series with respect to measurement uncertainties and a methodology for recalculation of the values were included.
|
|
| 5. |
- Bell, S., et al.
(författare)
-
METefnet : Developments in metrology for moisture in materials
- 2015
-
Ingår i: 17th International Congress of Metrology, CIM 2015. - Les Ulis, France : EDP Sciences.
-
Konferensbidrag (refereegranskat)abstract
- Bien que les mesures de teneur en eau soient largement utilisées dans l'industrie, les considérations métrologiques quant à cette mesure ne sont pas complètement abouties de sorte à fournir des mesures fiables et traçables au SI. Afin de remédier à ceci, le projet de recherche conjoint, Joint Research Project SIB64 “METefnet – Metrology for moisture in materials”, est actuellement en cours, et contribue au programme européen de recherche en métrologie European Metrology Research Programme. Le projet METefnet a pour objectifs de développer et d'améliorer l'approche métrologique de ce sujet. Ceci inclus notamment: le travail sur de nouvelles méthodes de référence pour évaluer la fraction massique en eau, l'amélioration des mesures mettant en œuvre la méthode primaire de type titration Karl Fischer, le développement de nouveaux matériaux de référence certifiés présentant une très bonne stabilité et permettant une traçabilité au SI, le développement de nouveaux étalons de transfert, la réalisation d'études visant à quantifier et réduire les effets liés à la prise d'échantillon, son transport et sa manipulation, le développement d'une nouvelle méthode pour étalonner les instruments mesurant l'humidité de surface, et l'amélioration des méthodes d'estimation d'incertitudes de ces mesures. Ce travail, réalisé dans le domaine de la métrologie de l'humidité au sein des matériaux, couvre à la fois le mesurande décrit comme étant spécifiquement la teneur en eau, seule, dans les matériaux, mais également un mesurande plus large pouvant inclure l'eau ainsi que d'autres liquides ou composés organiques volatiles; ceci afin de bien mettre en exergue la différence qui peut être observée entre ces deux mesurandes. Le projet global a pour objectif de soutenir une action de dissémination et de traçabilité au système SI des mesures de teneur en eau dans les matériaux avec une exactitude optimale et de développer une infrastructure métrologique cohérente pour ce type de mesures. Le travail technique ainsi que les dernières avancées vous sont ainsi présentées.
|
|
| 6. |
- Dobsicek Trefna, Hana, 1979, et al.
(författare)
-
Quality assurance guidelines for interstitial hyperthermia
- 2019
-
Ingår i: International Journal of Hyperthermia. - : Informa UK Limited. - 0265-6736 .- 1464-5157. ; 36:1, s. 277-294
-
Tidskriftsartikel (refereegranskat)abstract
- Quality assurance (QA) guidelines are essential to provide uniform execution of clinical hyperthermia treatments and trials. This document outlines the clinical and technical consequences of the specific properties of interstitial heat delivery and specifies recommendations for hyperthermia administration with interstitial techniques. Interstitial hyperthermia aims at tumor temperatures in the 40–44 °C range as an adjunct to radiation or chemotherapy. The clinical part of this document imparts specific clinical experience of interstitial heat delivery to various tumor sites as well as recommended interstitial hyperthermia workflow and procedures. The second part describes technical requirements for quality assurance of current interstitial heating equipment including electromagnetic (radiative and capacitive) and ultrasound heating techniques. Detailed instructions are provided on characterization and documentation of the performance of interstitial hyperthermia applicators to achieve reproducible hyperthermia treatments of uniform high quality. Output power and consequent temperature rise are the key parameters for characterization of applicator performance in these QA guidelines. These characteristics determine the specific maximum tumor size and depth that can be heated adequately. The guidelines were developed by the ESHO Technical Committee with participation of senior STM members and members of the Atzelsberg Circle.
|
|
| 7. |
- Doliška, A., et al.
(författare)
-
Antithrombotic properties of sulfated wood-derived galactoglucomannans
- 2012
-
Ingår i: Holzforschung. - 0018-3830 .- 1437-434X. ; 66:2, s. 149-154
-
Tidskriftsartikel (refereegranskat)abstract
- Galactoglucomannans (GGMs) are water-soluble polysaccharides released and accumulated in process waters in the production of thermomechanical pulp. The general trend in the forestry industry is moving towards bio-refineries, for example utilizing these hemicelluloses as bioactive substances. At present, there is no industrial use of wood-derived mannans. In this study, GGMs extracted from thermomechanical pulp, as well as further carboxymethyl-ated galactoglucomannans (CM-GGMs), were sulfated to increase their antithrombotic properties. The products were characterized with Fourier transform infrared spectroscopy, nuclear magnetic resonance and capillary electrophoresis. The carbohydrate composition and sulfur amounts were determined. The products' total charges were determined by polyelectrolyte titrations and their antithrombotic effect was measured based on the activated partial thromboplastin time. The results showed a significant increase in the antithrombotic effect of the sulfated galactoglucomannans from spruce wood and thus a potential new use for wood-derived mannans.
|
|
| 8. |
|
|
| 9. |
- Schneider, K. M., et al.
(författare)
-
Imbalanced gut microbiota fuels hepatocellular carcinoma development by shaping the hepatic inflammatory microenvironment
- 2022
-
Ingår i: Nature Communications. - : Springer Science and Business Media LLC. - 2041-1723. ; 13:1
-
Tidskriftsartikel (refereegranskat)abstract
- Hepatocellular carcinoma (HCC) is a leading cause of cancer-related deaths worldwide, and therapeutic options for advanced HCC are limited. Here, we observe that intestinal dysbiosis affects antitumor immune surveillance and drives liver disease progression towards cancer. Dysbiotic microbiota, as seen in Nlrp6(-/-) mice, induces a Toll-like receptor 4 dependent expansion of hepatic monocytic myeloid-derived suppressor cells (mMDSC) and suppression of T-cell abundance. This phenotype is transmissible via fecal microbiota transfer and reversible upon antibiotic treatment, pointing to the high plasticity of the tumor microenvironment. While loss of Akkermansia muciniphila correlates with mMDSC abundance, its reintroduction restores intestinal barrier function and strongly reduces liver inflammation and fibrosis. Cirrhosis patients display increased bacterial abundance in hepatic tissue, which induces pronounced transcriptional changes, including activation of fibro-inflammatory pathways as well as circuits mediating cancer immunosuppression. This study demonstrates that gut microbiota closely shapes the hepatic inflammatory microenvironment opening approaches for cancer prevention and therapy. Steatohepatitis is a chronic hepatic inflammation associated with increased risk of hepatocellular carcinoma progression. Here the authors show that intestinal dysbiosis in mice lacking the inflammasome sensor molecule NLRP6 aggravates steatohepatitis and accelerates liver cancer progression, a process that can be delayed by antibiotic treatment.
|
|
