1. |
- Klionsky, Daniel J., et al.
(författare)
-
Guidelines for the use and interpretation of assays for monitoring autophagy
- 2012
-
Ingår i: Autophagy. - : Informa UK Limited. - 1554-8635 .- 1554-8627. ; 8:4, s. 445-544
-
Forskningsöversikt (refereegranskat)abstract
- In 2008 we published the first set of guidelines for standardizing research in autophagy. Since then, research on this topic has continued to accelerate, and many new scientists have entered the field. Our knowledge base and relevant new technologies have also been expanding. Accordingly, it is important to update these guidelines for monitoring autophagy in different organisms. Various reviews have described the range of assays that have been used for this purpose. Nevertheless, there continues to be confusion regarding acceptable methods to measure autophagy, especially in multicellular eukaryotes. A key point that needs to be emphasized is that there is a difference between measurements that monitor the numbers or volume of autophagic elements (e.g., autophagosomes or autolysosomes) at any stage of the autophagic process vs. those that measure flux through the autophagy pathway (i.e., the complete process); thus, a block in macroautophagy that results in autophagosome accumulation needs to be differentiated from stimuli that result in increased autophagic activity, defined as increased autophagy induction coupled with increased delivery to, and degradation within, lysosomes (in most higher eukaryotes and some protists such as Dictyostelium) or the vacuole (in plants and fungi). In other words, it is especially important that investigators new to the field understand that the appearance of more autophagosomes does not necessarily equate with more autophagy. In fact, in many cases, autophagosomes accumulate because of a block in trafficking to lysosomes without a concomitant change in autophagosome biogenesis, whereas an increase in autolysosomes may reflect a reduction in degradative activity. Here, we present a set of guidelines for the selection and interpretation of methods for use by investigators who aim to examine macroautophagy and related processes, as well as for reviewers who need to provide realistic and reasonable critiques of papers that are focused on these processes. These guidelines are not meant to be a formulaic set of rules, because the appropriate assays depend in part on the question being asked and the system being used. In addition, we emphasize that no individual assay is guaranteed to be the most appropriate one in every situation, and we strongly recommend the use of multiple assays to monitor autophagy. In these guidelines, we consider these various methods of assessing autophagy and what information can, or cannot, be obtained from them. Finally, by discussing the merits and limits of particular autophagy assays, we hope to encourage technical innovation in the field.
|
|
2. |
- Chen, Haiyang, et al.
(författare)
-
Heterogeneous Nucleating Agent for High-Boiling-Point Nonhalogenated Solvent-Processed Organic Solar Cells and Modules
- 2024
-
Ingår i: Advanced Materials. - : WILEY-V C H VERLAG GMBH. - 0935-9648 .- 1521-4095.
-
Tidskriftsartikel (refereegranskat)abstract
- High-boiling-point nonhalogenated solvents are superior solvents to produce large-area organic solar cells (OSCs) in industry because of their wide processing window and low toxicity; while, these solvents with slow evaporation kinetics will lead excessive aggregation of state-of-the-art small molecule acceptors (e.g. L8-BO), delivering serious efficiency losses. Here, a heterogeneous nucleating agent strategy is developed by grafting oligo (ethylene glycol) side-chains on L8-BO (BTO-BO). The formation energy of the obtained BTO-BO; while, changing from liquid in a solvent to a crystalline phase, is lower than that of L8-BO irrespective of the solvent type. When BTO-BO is added as the third component into the active layer (e.g. PM6:L8-BO), it easily assembles to form numerous seed crystals, which serve as nucleation sites to trigger heterogeneous nucleation and increase nucleation density of L8-BO through strong hydrogen bonding interactions even in high-boiling-point nonhalogenated solvents. Therefore, it can effectively suppress excessive aggregation during growth, achieving ideal phase-separation active layer with small domain sizes and high crystallinity. The resultant toluene-processed OSCs exhibit a record power conversion efficiency (PCE) of 19.42% (certificated 19.12%) with excellent operational stability. The strategy also has superior advantages in large-scale devices, showing a 15.03-cm2 module with a record PCE of 16.35% (certificated 15.97%). The heterogeneous nucleating agent (BTO-BO) is developed to suppress the excessive aggregation of L8-BO in high-boiling-point nonhalogenated solvents processing, achieving the active layer with high crystallinity and nano-scaled phase separation morphology. The resultant OSCs achieve record power conversion efficiencies of 19.42% (0.062-cm2) and 16.35% (15. 03-cm2) with excellent operational stabilities. image
|
|
3. |
- Huang, Yuting, et al.
(författare)
-
Host-Guest Strategy Enabling Nonhalogenated Solvent Processing for High-Performance All-Polymer Hosted Solar Cells
- 2023
-
Ingår i: Chinese journal of chemistry. - : WILEY-V C H VERLAG GMBH. - 1001-604X .- 1614-7065. ; 41:9, s. 1066-1074
-
Tidskriftsartikel (refereegranskat)abstract
- The power conversion efficiencies (PCEs) of all-polymer solar cells (all-PSCs), usually processed from low-boiling-point and toxic solvents, have reached high values of 18%. However, poor miscibility and uncontrollable crystallinity in polymer blends lead to a notable drop in the PCEs when using green solvents, limiting the practical development of all-PSCs. Herein, a third component (guest) BTO was employed to optimize the miscibility and enhance the crystallinity of PM6/PY2Se-F host film processed from green solvent toluene (TL), which can effectively suppress the excessive aggregation of PY2Se-F and facilitate a nano-scale interpenetrating network morphology for exciton dissociation and charge transport. As a result, TL-processed all-polymer hosted solar cells (all-PHSCs) exhibited an impressive PCE of 17.01%. Moreover, the strong molecular interaction between the host and guest molecules also enhances the thermal stability of the devices. Our host-guest strategy provides a unique approach to developing high-efficiency and stable all-PHSCs processed from green solvents, paving the way for the industrial development of all-PHSCs.
|
|
4. |
- Wang, Mengmeng, et al.
(författare)
-
Statistical analysis of whistler precursors upstream of foreshock transient shocks : MMS observations
- 2024
-
Ingår i: Geophysical Research Letters. - : American Geophysical Union (AGU). - 0094-8276 .- 1944-8007. ; 51:8
-
Tidskriftsartikel (refereegranskat)abstract
- Using the high-time-resolution data from the Magnetospheric Multiscale mission, precursor waves upstream of foreshock transient (FT) shocks are statistically investigated using the four-spacecraft timing method. The wave frequencies and wave vectors determined in the plasma rest frame (PRF) are shown to follow the cold plasma dispersion relation for whistler waves. Combining with the feature of the right-hand polarization in the PRF, the precursors are identified as whistler-mode waves around the lower hybrid frequency. The occurrence of whistler precursors is independent of the Alfvén Mach number and the FT shock normal angle. More importantly, all the whistler precursors have group velocities pointing upstream in the shock frame, suggesting the dispersive radiation to be a possible generation mechanism. The study improves the understanding of not only the whistler precursors but also the overall FT shock dynamics.
|
|
5. |
- Zhang, Ben, et al.
(författare)
-
Rapid solidification for green-solvent-processed large-area organic solar modules with >16% efficiency
- 2024
-
Ingår i: Energy & Environmental Science. - : ROYAL SOC CHEMISTRY. - 1754-5692 .- 1754-5706.
-
Tidskriftsartikel (refereegranskat)abstract
- Enabling green-solvent-processed large-area organic solar cells (OSCs) is of great significance to their industrialization. However, precisely controlling the temperature-dependent fluid mechanics and evaporation behavior of green solvents with high-boiling points is challenging. Controlling these parameters is essential to prevent the non-uniform distribution of active layer components and severe molecule aggregation, which collectively degrade the power conversion efficiency (PCE) of large-scale devices. In this study, we revealed that the temperature gradient distribution across a wet film is the root of the notorious Marangoni effect, which leads to the formation of a severely non-uniform active layer on a large scale. Thus, a rapid solidification strategy was proposed to accelerate the evaporation of toluene, a green solvent, at room temperature. This strategy simultaneously inhibits the Marangoni effect and suppresses molecular aggregation in the wet film, allowing the formation of a nano-scale phase separation active layer with uniform morphology. The resultant toluene-processed 15.64-cm2 large-area OSC module achieves an outstanding PCE of 16.03% (certified: 15.69%), which represents the highest reported PCE of green-solvent-processed OSC modules. Notably, this strategy also exhibits a weak scale dependence on the PCE, and we successfully achieved a state-of-the-art PCE of 14.45% for a 72.00-cm2 OSC module. A rapid solidification strategy was developed for simultaneously avoiding the Marangoni effect and suppressing molecular aggregation. The resultant 15.64 cm2 large-area OSC module exhibited a record power conversion efficiency of 16.03%.
|
|