| 1. |
- Zamora, Juan Carlos, et al.
(författare)
-
Considerations and consequences of allowing DNA sequence data as types of fungal taxa
- 2018
-
Ingår i: IMA Fungus. - : INT MYCOLOGICAL ASSOC. - 2210-6340 .- 2210-6359. ; 9:1, s. 167-185
-
Tidskriftsartikel (refereegranskat)abstract
- Nomenclatural type definitions are one of the most important concepts in biological nomenclature. Being physical objects that can be re-studied by other researchers, types permanently link taxonomy (an artificial agreement to classify biological diversity) with nomenclature (an artificial agreement to name biological diversity). Two proposals to amend the International Code of Nomenclature for algae, fungi, and plants (ICN), allowing DNA sequences alone (of any region and extent) to serve as types of taxon names for voucherless fungi (mainly putative taxa from environmental DNA sequences), have been submitted to be voted on at the 11th International Mycological Congress (Puerto Rico, July 2018). We consider various genetic processes affecting the distribution of alleles among taxa and find that alleles may not consistently and uniquely represent the species within which they are contained. Should the proposals be accepted, the meaning of nomenclatural types would change in a fundamental way from physical objects as sources of data to the data themselves. Such changes are conducive to irreproducible science, the potential typification on artefactual data, and massive creation of names with low information content, ultimately causing nomenclatural instability and unnecessary work for future researchers that would stall future explorations of fungal diversity. We conclude that the acceptance of DNA sequences alone as types of names of taxa, under the terms used in the current proposals, is unnecessary and would not solve the problem of naming putative taxa known only from DNA sequences in a scientifically defensible way. As an alternative, we highlight the use of formulas for naming putative taxa (candidate taxa) that do not require any modification of the ICN.
|
|
| 2. |
- Alnegren, Patrik, 1988, et al.
(författare)
-
Inhibiting chromium evaporation and oxide scale growth on SOFC metallic interconnects by nano coatings
- 2014
-
Ingår i: 20th World Hydrogen Energy Conference, WHEC 2014. - 9780000000002 ; 1:2014
-
Konferensbidrag (refereegranskat)abstract
- High chromium ferritic steel is today the most commonly considered material for SOFC interconnectors due to many desirable properties, such as matching thermal expansion coefficient with other cell components but most importantly better machinability and price compared to ceramic alternatives. Yet there are some obstacles that need to be addressed before long term stability of a ferritic steel interconnector based fuel cell stack can be realized. First of all the electrical conductivity needs to remain high throughout the fuel cell stack operating life time and thus the formed oxide layers need to be electrically conductive and thin. Secondly, volatilization of chromium from the oxide scale of metallic interconnects causes rapid degradation due cathode poisoning. In the current study both oxidation and chromium evaporation of ferritic steel substrates are investigated in controlled atmospheres that simulates the environments of an operating SOFC stack. Samples coated with nanometer scale dual coatings of Co and Ce were tested. The dual coating substantially increased the performance of the ferritic substrates by i) significantly reducing oxidation rate, ii) increasing scale adherence and iii) diminishing chromium evaporation by 90 % via the formation of a Co-Mn-spinel cap layer.
|
|
| 3. |
|
|
| 4. |
- Grolig, Jan Gustav, 1986, et al.
(författare)
-
Coated stainless steel 441 as interconnect material for solid oxide fuel cells: Evolution of electrical properties
- 2015
-
Ingår i: Journal of Power Sources. - : Elsevier BV. - 0378-7753. ; 284, s. 321-327
-
Tidskriftsartikel (refereegranskat)abstract
- AISI 441 coated. with a double layer coating of 10 nm cerium (inner layer) and 630 nm cobalt was investigated and in addition the uncoated material was exposed for comparison. The main purpose of this investigation was the development of a suitable ASR characterization method. The material was exposed to a simulated cathode atmosphere of air with 3% water at 850 degrees C and the samples were exposed for up to 1500 h. We compared two methods of ASR measurements, an in-situ method where samples were measured with platinum electrodes for longer exposure times and an ex-situ method where pre-oxidized samples were measured for only very short measurement times. It was found that the ASR of ex-situ characterized samples could be linked to the mass gain and the electrical properties could be linked to the evolving microstructure during the different stages of exposure. Both the degradation of the electric performance and the oxygen uptake (mass gain) followed similar trends. After about 1500 h of exposure an ASR value of about 15 m Omega cm(2) was reached. The in-situ measured samples suffered from severe corrosion attack during measurement. After only 500 h of exposure already a value of 35 m Omega cm(2) was obtained.
|
|
| 5. |
- Grolig, Jan Gustav, 1986, et al.
(författare)
-
Coated stainless steel 441 as interconnect material for solid oxide fuel cells: Oxidation performance and chromium evaporation
- 2014
-
Ingår i: Journal of Power Sources. - : Elsevier BV. - 0378-7753. ; 248, s. 1007-1013
-
Tidskriftsartikel (refereegranskat)abstract
- Reactive Element (RE) and RE/cobalt-coated stainless steel AISI 441 was exposed at Solid Oxide Fuel Cell (SOFC) cathode conditions (850 degrees C in air with 3% water content) for up to 500 h. The chromium evaporation was measured by applying the denuder technique. Uncoated material exhibited severe spallation which could be successfully prevented by using cerium or lanthanum coatings. By applying double layer coatings of cerium or lanthanum in combination with cobalt the oxidation rate was decreased and the chromium volatilisation was also about 90% lower than the uncoated material.
|
|
| 6. |
- Grolig, Jan Gustav, 1986, et al.
(författare)
-
Copper based conversion coatings on ferritic stainless strip steel as solid oxide fuel cell interconnects: Oxidation performance and chromium evaporation
- 2013
-
Ingår i: ECS Transactions. - : The Electrochemical Society. - 1938-5862 .- 1938-6737. ; 57:1, s. 2339-2347
-
Konferensbidrag (refereegranskat)abstract
- Ferritic stainless steels such as Crofer 22 H or Sanergy HT have been proven to be effective interconnect materials when additionally coated. These coatings, mainly based on cobalt spinels, successfully prevent chromium evaporation and are stable for long exposure times. A new approach is using copper based spinel coatings which are promising concerning price, conductivity and stability. This investigation is dedicated to a selection of copper spinel conversion coatings, their stability and ability to prevent chromium evaporation. Chromium release was monitored in humidified air (at 850 °C) using the denuder technique. The coatings were post analysed utilizing electron microscopy.
|
|
| 7. |
- Grolig, Jan Gustav, 1986, et al.
(författare)
-
Copper Iron Conversion Coating for Solid Oxide Fuel Cell Interconnects
- 2015
-
Ingår i: Journal of Power Sources. - : Elsevier BV. - 0378-7753. ; 297, s. 534-539
-
Tidskriftsartikel (refereegranskat)abstract
- A conversion coating of iron and copper was investigated with the purpose of increasing the performance of Sanergy HT as a potential SOFC interconnect material. Samples were exposed to a simulated cathode atmosphere (air, 3 % H2O) for durations of up to 1000 h at 850 °C. Their performance in terms of corrosion, chromium evaporation and electrical resistance (ASR) was monitored and compared to uncoated and cobalt-coated Sanergy HT samples. The copper iron coating had no negative effects on corrosion protection and decreased chromium evaporation by about 80%. An Area Specific Resistance (ASR) of 10 mΩcm2 was reached after 1000 h of exposure. Scanning Electron Microscopy revealed well adherent oxide layers comprised of an inner chromia layer and an outer spinel oxide layer.
|
|
| 8. |
- Grolig, Jan Gustav, 1986, et al.
(författare)
-
Effect of Cerium on the Electrical Properties of a Cobalt Conversion Coating for Solid Oxide Fuel Cell Interconnects - A Study Using Impedance Spectroscopy
- 2015
-
Ingår i: Electrochimica Acta. - : Elsevier BV. - 0013-4686. ; 184, s. 301-307
-
Tidskriftsartikel (refereegranskat)abstract
- Coatings of metallic cobalt, which convert into a cobalt manganese spinel oxide are known to improve the properties of interconnects for solid oxide fuel cells (SOFCs). The addition of cerium to the cobalt coating further improves the corrosion properties of the material. For this study traditional four-point DC measurements at high temperatures were combined with impedance spectroscopy at low temperatures in order to investigate the effect of cerium on the electrical properties of a cobalt conversion coating. It was found that combination-coatings of cerium and cobalt exhibit superior electrical properties compared to pure cobalt coatings. Cerium slows down the growth of chromia and prevents the outward diffusion of iron into the cobalt spinel layer. Both effects are beneficial for the electrical properties of the interconnect. Impedance spectroscopy measurements revealed that even after more than 3000 h of exposure the outer cobalt manganese spinel layer still has a higher electrical conductivity when cerium was present.
|
|
| 9. |
- Henricsson, Marianne, et al.
(författare)
-
The incidence of retinopathy 10 years after diagnosis in young adult people with diabetes: results from the nationwide population-based Diabetes Incidence Study in Sweden (DISS).
- 2003
-
Ingår i: Diabetes Care. - : American Diabetes Association. - 1935-5548 .- 0149-5992. ; 26:2, s. 349-354
-
Tidskriftsartikel (refereegranskat)abstract
- OBJECTIVE—To estimate the prevalence and severity of diabetic retinopathy (DR) 10 years after diagnosis in a nationwide population-based cohort study of young adult diabetic patients in Sweden. RESEARCH DESIGN AND METHODS—The Diabetes Incidence Study in Sweden (DISS) aims to register all incident cases of diabetes aged 15–34 years in Sweden. In 1987–1988, 806 cases were reported, and 627 (78%) of them were followed up with regard to retinopathy 8–10 years later. The assessment was based on retinal photographs in most cases (86%). RESULTS—Ten years after diagnosis, retinopathy was found in 247 patients (39%). The retinopathy was mild in 206 (33%), whereas 30 (4.8%) patients had moderate nonproliferative DR (NPDR) and 11 (1.8%) had proliferative DR (PDR). Patients with retinopathy had worse glycemic control during the years than patients without (HbA1c 8.1 ± 1.5% and 6.8 ± 1.2%, respectively; P < 0.001). In a Cox regression analysis, time to retinopathy was related to high HbA1c (P < 0.001) and high BMI (P = 0.001). Patients with type 2 diabetes had an increased prevalence of severe retinopathy (NPDR or PDR) compared with those with type 1 diabetes (14 of 93 [15%] versus no or mild 24 of 471 [5%], respectively; P < 0.001). CONCLUSIONS—Despite modern diabetes management, 39% of young adult diabetic patients developed retinopathy within the first 10 years of the disease. Nevertheless, compared with the prevalence of retinopathy (63%), after a similar duration of diabetes before the Diabetes Control and Complications Trial, this prevalence was clearly lower. Current treatment aimed to achieve strict glycemic control has reduced the risk for developing retinopathy.
|
|
| 10. |
- Svensson, Maria, et al.
(författare)
-
Signs of nephropathy may occur early in young adults with diabetes despite modern diabetes management : Results from the nationwide population-based Diabetes Incidence Study in Sweden (DISS)
- 2003
-
Ingår i: Diabetes Care. - : American Diabetes Association. - 0149-5992 .- 1935-5548. ; 26:10, s. 2903-2909
-
Tidskriftsartikel (refereegranskat)abstract
- OBJECTIVE - To estimate the occurrence of early-onset renal involvement in a nationwide population-based cohort of young adults with diabetes in Sweden and relate the findings to glycemic control, type of diabetes, sex, smoking, and blood pressure. RESEARCH DESIGN AND METHODS - The Diabetes Incidence Study in Sweden aims to register all incident cases of diabetes in the age-group 15-34 years. In 1987-1988, 806 patients were reported and invited to participate in a follow-up study focusing on microvascular complications. Of them, 469 subjects participated. The assessment was based on questionnaires (n = 469), blood samples (n = 424), urine samples (n = 251) and, when appropriate, medical records (n = 186). RESULTS - During the follow-up time, median 9 years (range 6-12), 31 of 469 patients (6.6%) with incipient or overt diabetic nephropathy (i.e., micro- or macroalbuminuria) were found, 24 of 426 (5.6%) in type 1 and 7 of 43 (16%) in type 2 diabetic subjects (P = 0.016). Additionally, 24 of 31 patients (77%) had microalbuminuria and 7 (23%) had macroalbuminuria, which mainly occurred in patients with type 2 diabetes. In a Cox regression analysis, high mean HbA1c during the follow-up period and high blood pressure at follow-up increased the risk of developing signs of nephropathy (P = 0.020 and P = 0.003, respectively). Compared with patients with type 1 diabetes, those with type 2 diabetes tended to have an increased risk of renal involvement (P = 0.054) when adjusting for sex, tobacco use, glycemic control, and blood pressure. CONCLUSIONS - Despite modern treatment and self-monitoring of blood glucose, young adult patients with diabetes may still develop renal involvement during the first 10 years of diabetes duration. Inadequate HbA 1c high blood pressure, and type 2 diabetes appear to be risk markers for early occurrence of diabetic nephropathy.
|
|
| 11. |
|
|
| 12. |
- Torffvit, Ole, et al.
(författare)
-
Early changes in glomerular size selectivity in young adults with type 1 diabetes and retinopathy. Results from the Diabetes Incidence Study in Sweden.
- 2007
-
Ingår i: Journal of Diabetes and its Complications. - : Elsevier BV. - 1873-460X .- 1056-8727. ; 21:4, s. 246-251
-
Tidskriftsartikel (refereegranskat)abstract
- Objective: To investigate the relationship between early-onset retinopathy and urinary markers of renal dysfunction. Research Design and Methods: The Diabetes Incidence Study in Sweden (DISS) aims to register all new cases of diabetes in young adults (15-34 years). In 1987-1988, 806 patients were reported and later invited to participate in a follow-up study focusing on microvascular complications after similar to 10 years of diabetes. In the present study, 149 patients with type I diabetes, completed eye examination, and urine sampling were included. Results: The patients with retinopathy (n=58, 39%) had higher HbA(1c), (P<.001) and urinary IgG2/creatinine (P<.05) and IgG2/IgG4 ratios (P<.05). Patients with maculopathy had the highest levels. No significant differences in urinary albumin/creatinine, glycosaminoglycans (GAGs)/creatinine, Tamm-Horsfall protein (THP)/creatinine, and IgG4/creatinine ratios were found. Women had higher urinary albumin/ creatinine (P<.01) and urinary IgG2/creatinine ratios (P<.01) than men. Conclusions: Young adults with type I diabetes and early-onset retinopathy had higher IgG2/creatinine and IgG2/IgG4 ratios than patients without retinopathy indicating that retinopathy is associated with a change in glomerular size selectivity. This was found in association with normal urinary albumin and THP excretion and may be suspected to reflect early general vascular changes. (C) 2007 Elsevier Inc. All rights reserved.
|
|
| 13. |
- Alehagen, Urban, et al.
(författare)
-
Effects of an Intervention with Selenium and Coenzyme Q(10) on Five Selected Age-Related Biomarkers in Elderly Swedes Low in Selenium: Results That Point to an Anti-Ageing Effect-A Sub-Analysis of a Previous Prospective Double-Blind Placebo-Controlled Randomised Clinical Trial
- 2023
-
Ingår i: Cells. - : MDPI. - 2073-4409. ; 12:13
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Ageing is associated with cardiovascular disease (CVD). As no single biomarker reflects the full ageing process, we aimed to investigate five CVD- and age-related markers and the effects of selenium and coenzyme Q10 intervention to elucidate the mechanisms that may influence the course of ageing. Methods: This is a sub-study of a previous prospective double-blind placebo-controlled randomized clinical trial that included 441 subjects low in selenium (mean age 77, 49% women). The active treatment group (n = 220) received 200 & mu;g/day of selenium and 200 mg/day of coenzyme Q10, combined. Blood samples were collected at inclusion and after 48 months for measurements of the intercellular adhesion molecule (ICAM-1), adiponectin, leptin, stem cell factor (SCF) and osteoprotegerin (OPG), using ELISAs. Repeated measures of variance and ANCOVA evaluations were used to compare the two groups. In order to better understand and reduce the complexity of the relationship between the biomarkers and age, factor analyses and structural equation modelling (SEM) were performed, and a structural model is presented. Results: Correlation analyses of biomarker values at inclusion in relation to age, and relevant markers related to inflammation, endothelial dysfunction and fibrosis, demonstrated the biomarkers association with these pathological processes; however, only ICAM1 and adiponectin were directly correlated with age. SEM analyses showed, however, that the biomarkers ICAM-1, adiponectin, SCF and OPG, but not leptin, all had significant associations with age and formed two independent structural factors, both significantly related to age. While no difference was observed at inclusion, the biomarkers were differently changed in the active treatment and placebo groups (decreasing and increasing levels, respectively) at 48 months (p & LE; 0.02 in all, adjusted), and in the SEM model, they showed an anti-ageing impact. Conclusions: Supplementation with selenium/Q10 influenced the analysed biomarkers in ways indicating an anti-ageing effect, and by applying SEM methodology, the interrelationships between two independent structural factors and age were validated.
|
|
| 14. |
- Alehagen, Urban, 1951-, et al.
(författare)
-
Improved cardiovascular health by supplementation with selenium and coenzyme Q10 : applying structural equation modelling (SEM) to clinical outcomes and biomarkers to explore underlying mechanisms in a prospective randomized double-blind placebo-controlled intervention project in Sweden
- 2022
-
Ingår i: European Journal of Nutrition. - : Springer Heidelberg. - 1436-6207 .- 1436-6215. ; 61:6, s. 3135-3148
-
Tidskriftsartikel (refereegranskat)abstract
- Purpose Selenium and coenzyme Q10 have synergistic antioxidant functions. In a four-year supplemental trial in elderly Swedes with a low selenium status, we found improved cardiac function, less cardiac wall tension and reduced cardiovascular mortality up to 12 years of follow-up. Here we briefly review the main results, including those from studies on biomarkers related to cardiovascular risk that were subsequently conducted. In an effort, to explain underlying mechanisms, we conducted a structured analysis of the inter-relationship between biomarkers. Methods Selenium yeast (200 mu g/day) and coenzyme Q10 (200 mg/ day), or placebo was given to 443 elderly community-living persons, for 48 months. Structural Equation Modelling (SEM) was used to investigate the statistical inter-relationships between biomarkers related to inflammation, oxidative stress, insulin-like growth factor 1, expression of microRNA, fibrosis, and endothelial dysfunction and their impact on the clinical effects. The main study was registered at Clinicaltrials.gov at 30th of September 2011, and has the identifier NCT01443780. Results In addition to positive clinical effects, the intervention with selenium and coenzyme Q10 was also associated with favourable effects on biomarkers of cardiovascular risk. Using these results in the SEM model, we showed that the weights of the first-order factors inflammation and oxidative stress were high, together forming a second-order factor inflammation/oxidative stress influencing the factors, fibrosis (beta = 0.74; p < 0.001) and myocardium (beta = 0.65; p < 0.001). According to the model, the intervention impacted fibrosis and myocardium through these factors, resulting in improved cardiac function and reduced CV mortality. Conclusion Selenium reduced inflammation and oxidative stress. According to the SEM analysis, these effects reduced fibrosis and improved myocardial function pointing to the importance of supplementation in those low on selenium and coenzyme Q10.
|
|
| 15. |
- Alehagen, Urban, et al.
(författare)
-
Less fibrosis in elderly subjects supplemented with selenium and coenzyme Q10-A mechanism behind reduced cardiovascular mortality?
- 2018
-
Ingår i: Biofactors. - : John Wiley & Sons. - 0951-6433 .- 1872-8081. ; 44:2, s. 137-147
-
Tidskriftsartikel (refereegranskat)abstract
- BACKGROUND: In an intervention study where 221 healthy elderly persons received selenium and coenzyme Q10 as a dietary supplement, and 222 received placebo for 4 years we observed improved cardiac function and reduced cardiovascular mortality. As fibrosis is central in the aging process, we investigated the effect of the intervention on biomarkers of fibrogenic activity in a subanalysis of this intervention study.MATERIAL AND METHODS: In the present subanalysis 122 actively treated individuals and 101 controls, the effect of the treatment on eight biomarkers of fibrogenic activity were assessed. These biomarkers were: Cathepsin S, Endostatin, Galectin 3, Growth Differentiation Factor-15 (GDF-15), Matrix Metalloproteinases 1 and 9, Tissue Inhibitor of Metalloproteinases 1 (TIMP 1) and Suppression of Tumorigenicity 2 (ST-2). Blood concentrations of these biomarkers after 6 and 42 months were analyzed by the use of T-tests, repeated measures of variance, and factor analyses.RESULTS: Compared with placebo, in those receiving supplementation with selenium and coenzyme Q10, all biomarkers except ST2 showed significant decreased concentrations in blood. The changes in concentrations, that is, effects sizes as given by partial eta2 caused by the intervention were considered small to medium.CONCLUSION: The significantly decreased biomarker concentrations in those on active treatment with selenium and coenzyme Q10 compared with those on placebo after 36 months of intervention presumably reflect less fibrogenic activity as a result of the intervention. These observations might indicate that reduced fibrosis precedes the reported improvement in cardiac function, thereby explaining some of the positive clinical effects caused by the intervention. © 2017 BioFactors, 2017.
|
|
| 16. |
- Alnegren, Patrik, 1988, et al.
(författare)
-
Degradation of ferritic stainless steels under conditions used for solid oxide fuel cells and electrolyzers at varying oxygen pressures
- 2016
-
Ingår i: Corrosion Science. - : Elsevier BV. - 0010-938X. ; 110, s. 200-212
-
Tidskriftsartikel (refereegranskat)abstract
- Four commercial ferritic stainless steels were tested at 850 °C in oxygen pressures ranging from 10-4 to 1 atm, in order to investigate the isolated effect of oxygen pressure on corrosion, in the context of solid oxide electrolysis cells. The oxidation rates of all steels were essentially independent of oxygen partial pressure, which indicates n-type behavior. FIB/SEM analysis revealed that the grain size of the oxides was found to decrease at lower oxygen pressures. Volatile Cr species evaporation in pure oxygen was significantly lower than what has been reported for simulated solid oxide fuel cell environments with humid air.
|
|
| 17. |
- Alnegren, Patrik, 1988, et al.
(författare)
-
Degradation of Ferritic steel interconnects in SOEC environments
- 2013
-
Ingår i: ECS Transactions. - : The Electrochemical Society. - 1938-5862 .- 1938-6737. ; 57:1, s. 2261-2270
-
Konferensbidrag (refereegranskat)abstract
- This study investigates the corrosion performance of selected ferritic steels in simulated solid oxide electrolysis cell (SOEC) environments for exposure times up 500 h. Ferritic steels have many properties that are desirable for interconnects but suffer from oxidation and chromium evaporation over time. Four different FeCr alloys have been exposed in different concentrations of dry O2 (anode side) and in 34 % H2O -3 % H2-Ar (cathode side) at 850 °C and gravimetrical measurements have been performed to study oxidation rates. Chromium evaporation has been measured and compared for the oxygen containing environments. Chromium evaporation was found to vary largely with oxygen partial pressure, while the oxidation rate of the steels did not vary substantially in the different oxygen partial pressures. Differences in oxidation behavior of the steels were observed between the exposures in dry O2 and in 34 % H2O -3 % H2 -Ar. Both reduced and increased oxidation rates were observed in the cathode side atmosphere compared to the oxygen side atmosphere for different materials.
|
|
| 18. |
- Alnegren, Patrik, 1988, et al.
(författare)
-
Metallic Bipolar Plates for High Temperature Polymer Electrolyte Membrane Fuel Cells
- 2016
-
Ingår i: Fuel Cells. - : Wiley. - 1615-6846 .- 1615-6854. ; 16:1, s. 39-45
-
Tidskriftsartikel (refereegranskat)abstract
- High temperature polymer membrane fuel cells (HTPEMFCs) are promising devices for future mobile applications. To minimize phosphoric acid migration from the membranes and to reduce the total stack weight and size metallic bipolar plates are a promising alternative. So far only very few published results are available on the use of metallic bipolar plates in HTPEMFCs. During this work a single test cell was equipped with metallic endplates to investigate the possibility of using metallic bipolar plates in HTPEMFC stacks. Furthermore we tried to simulate the environments present in an HTPEMFC by furnace exposures in an attempt to develop a simplified test method for accelerated corrosion of bipolar plate materials. It was found that the performance of the HTPEM test cell decreased by about 15 mu V h(-1). More corrosion products were seen on the cathode side samples, whereas on the anode side sample the corrosion attack of the steel was more severe. These results were successfully replicated in simulated furnace experiments.
|
|
| 19. |
- Alnegren, Patrik, 1988, et al.
(författare)
-
Severe dual atmosphere effect at 600 °C for stainless steel 441
- 2016
-
Ingår i: Journal of Power Sources. - : Elsevier BV. - 0378-7753. ; 301, s. 170-178
-
Tidskriftsartikel (refereegranskat)abstract
- AISI 441 foils of 0.2 mm thickness were exposed in a dual atmosphere setup in which one side was exposed to air -3% H2O and the other to Ar -5% H2 - 3% H2O. The experiment was performed at 600 °C and was referenced against exposures in air +3% H2O on both sides. The exposure conditions were chosen to simulate the conditions of an interconnect in intermediate temperature solid oxide fuel cell stacks (IT-SOFC). A strong dual atmosphere effect was observed: local breakaway corrosion was discovered after only 1000 h on samples exposed to dual atmospheres. After 3000 h iron oxide had propagated to cover the entire surface area of the sample. In comparison, the samples exposed in single atmosphere formed thin protective chromia scales on both sides even after 3000 h of exposure.
|
|
| 20. |
- Alnegren, Patrik, 1988, et al.
(författare)
-
Temperature dependence of corrosion of ferritic stainless steel in dual atmosphere at 600–800 °C
- 2018
-
Ingår i: Journal of Power Sources. - : Elsevier BV. - 0378-7753. ; 392, s. 129-138
-
Tidskriftsartikel (refereegranskat)abstract
- The ferritic stainless steel AISI 441 (EN 1.4509) is exposed for 1000 h to air - 3% H2O on one side and to Ar - 5% H2 – 3% H2O on the other at temperatures 600, 700, and 800 °C. Conditions are chosen to mimic the environment of metallic interconnects in an operating solid oxide fuel cell (SOFC). At 600 °C, ∼25 μm thick Fe2O3/(Fe,Cr)3O4 forms on large parts of the air side of the samples. Reference samples exposed to air - 3% H2O on both sides form thin protective layers of (Cr,Mn)3O4/Cr2O3 at the same temperature. At higher temperatures, 700 and 800 °C, all samples form protective layers of (Cr,Mn)3O4/Cr2O3 regardless of exposure to single or dual atmosphere. It is concluded that corrosion resistance in a dual atmosphere has an inverse dependence on temperature. Different hypotheses for the underlying cause for the dual atmosphere effect are discussed and compared to the experimental data.
|
|
| 21. |
- Bergman, Annika, et al.
(författare)
-
No germline mutations in supposed tumour suppressor genes SAFB1 and SAFB2 in familial breast cancer with linkage to 19p.
- 2008
-
Ingår i: BMC Medical Genetics. - : BioMed Central. - 1471-2350. ; 9
-
Tidskriftsartikel (refereegranskat)abstract
- BACKGROUND: The scaffold attachment factor B1 and B2 genes, SAFB1/SAFB2 (both located on chromosome 19p13.3) have recently been suggested as tumour suppressor genes involved in breast cancer development. The assumption was based on functional properties of the two genes and loss of heterozygosity of intragenic markers in breast tumours further strengthened the postulated hypothesis. In addition, linkage studies in Swedish breast cancer families also indicate the presence of a susceptibility gene for breast cancer at the 19p locus. Somatic mutations in SAFB1/SAFB2 have been detected in breast tumours, but to our knowledge no studies on germline mutations have been reported. In this study we investigated the possible involvement of SAFB1/SAFB2 on familiar breast cancer by inherited mutations in either of the two genes.RESULTS: Mutation analysis in families showing linkage to the SAFB1/2 locus was performed by DNA sequencing. The complete coding sequence of the two genes SAFB1 and SAFB2 was analyzed in germline DNA from 31 affected women. No missense or frameshift mutations were detected. One polymorphism was found in SAFB1 and eight polymorphisms were detected in SAFB2. MLPA-anlysis showed that both alleles of the two genes were preserved which excludes gene inactivation by large deletions.CONCLUSION: SAFB1 and SAFB2 are not likely to be causative of the hereditary breast cancer syndrome in west Swedish breast cancer families.
|
|
| 22. |
- Bexell, Ulf, et al.
(författare)
-
Chromium evaporation from plastically deformed pre-coated Sandvik Sanergy HT 22% Cr ferritic interconnect steel
- 2010
-
Ingår i: 2010 Conference Memory Stick 9th European SOFC Forum. - Lucerne.
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- Ferritic stainless steel has attracted a great deal of attention for its use as an interconnector in solid oxide fuel cells (SOFCs). The ferritic Sandvik Sanergy HT chromium steel is specially developed for interconnectors in SOFC with a unique chemical composition, which gives the alloy a good high temperature corrosion resistance as well as good surface conductivity in the formed chromium oxide scale. However, chromium evaporation from metallic interconnectors in SOFC fuel cells tends to poison the cathode of the fuel cell. Furthermore, the evaporation of chromium species from the oxide surface tends to increase the oxidation rate resulting in increased contact resistance. It is nowadays well known that thin coatings of e.g. cobalt can substantially reduce the chromium evaporation from the interconnectors. In this study, a 22% Cr ferritic steel, Sandvik Sanergy HT has been coated with a thin metallic cobalt film. The coated material was plastically deformed and the effect of chromium evaporation was studied as a function of the degree of deformation. Coated samples are also compared to uncoated material. The results show that the metallic cobalt film cracks when the steel sheet is formed but the chromium evaporation is more or less unaffected.
|
|
| 23. |
|
|
| 24. |
- Bohlooly-Yeganeh, Mohammad, 1966, et al.
(författare)
-
Growth hormone overexpression in the central nervous system results in hyperphagia-induced obesity associated with insulin resistance and dyslipidemia.
- 2005
-
Ingår i: Diabetes. - 0012-1797 .- 1939-327X. ; 54:1, s. 51-62
-
Tidskriftsartikel (refereegranskat)abstract
- It is well known that peripherally administered growth hormone (GH) results in decreased body fat mass. However, GH-deficient patients increase their food intake when substituted with GH, suggesting that GH also has an appetite stimulating effect. Transgenic mice with an overexpression of bovine GH in the central nervous system (CNS) were created to investigate the role of GH in CNS. This study shows that overexpression of GH in the CNS differentiates the effect of GH on body fat mass from that on appetite. The transgenic mice were not GH-deficient but were obese and showed increased food intake as well as increased hypothalamic expression of agouti-related protein and neuropeptide Y. GH also had an acute effect on food intake following intracerebroventricular injection of C57BL/6 mice. The transgenic mice were severely hyperinsulinemic and showed a marked hyperplasia of the islets of Langerhans. In addition, the transgenic mice displayed alterations in serum lipid and lipoprotein levels and hepatic gene expression. In conclusion, GH overexpression in the CNS results in hyperphagia-induced obesity indicating a dual effect of GH with a central stimulation of appetite and a peripheral lipolytic effect.
|
|
| 25. |
|
|
| 26. |
- Buse, Eberhard, et al.
(författare)
-
The placenta in toxicology. Part I : Animal models in toxicology
- 2014
-
Ingår i: Toxicologic pathology (Print). - : Sage Publications. - 0192-6233 .- 1533-1601. ; 42:2, s. 314-326
-
Forskningsöversikt (refereegranskat)abstract
- The immune system represents a key defense mechanism against potential pathogens and adverse non-self materials. During pregnancy, the placenta is the point of contact between the maternal organism and non-self proteins of the fetal allograft and hence undoubtedly fulfils immune functions. In the placenta bacteria, foreign (non-self) proteins and proteins that might be introduced in toxicological studies or by medication are barred from reaching the progeny, and the maternal immune system is primed for acceptance of non-maternal fetal protein. Both immunologic protection of the fetus and acceptance of the fetus by the mother require effective mechanisms to prevent an immunologic fetomaternal conflict and to keep both organisms in balance. This is why the placenta requires toxicological consideration in view of its immune organ function. The following articles deal with placenta immune-, control-, and tolerance mechanisms in view of both fetal and maternal aspects. Furthermore, models for experimental access to placental immune function are addressed and the pathological evaluation is elucidated. "The Placenta as an Immune Organ and Its Relevance in Toxicological Studies" was subject of a continuing education course at the 2012 Society of Toxicologic Pathology meeting held in Boston, MA.
|
|
| 27. |
- Canovic, Sead, 1979, et al.
(författare)
-
Oxidation of Co- and Ce-nanocoated FeCr steels: A microstructural investigation
- 2013
-
Ingår i: Surface and Coatings Technology. - : Elsevier BV. - 0257-8972. ; 215, s. 62-74
-
Tidskriftsartikel (refereegranskat)abstract
- The effect of novel Co and Ce nanocoatings on oxidation behaviour and chromium volatilization from a commercial Fe-22Cr steel (Sanergy HT) developed for solid oxide fuel cell interconnect applications is investigated. Three different coatings (10 nm Ce, 640 nm Co and 10 nm Ce + 640 nm Co) are studied. Uncoated and nanocoated samples are exposed isothermally at 850 C in the air with 3% H2O for 168 h. The detailed microstructure of the different coatings is investigated. The surface morphology and microstructure of the oxide scales are characterized by using scanning electron microscopy (SEM), transmission electron microscopy (TEM), scanning transmission electron microscopy (STEM) and energy dispersive X-ray analysis (EDX). Cross-section TEM thin foils are prepared by using a combined FIB/SEM (focused ion beam/scanning electron microscope) instrument. A 640 nm cobalt coating strongly inhibits Cr volatilization but has only minor effects on oxidation rate. In contrast, a 10 nm Ce coating decreases the oxidation rate but has no significant effects on chromium volatilization. Combining the two coatings, i.e., applying a 640 nm Co coating on top of the 10 nm Ce, effectively reduces Cr evaporation and slows down the rate of alloy oxidation.
|
|
| 28. |
- Chyrkin, Anton, 1984, et al.
(författare)
-
Effect of Hydrogen on the Internal Oxidation of a Pd–Cr Alloy in Dual-Atmosphere Conditions
- 2022
-
Ingår i: Oxidation of Metals. - : Springer Science and Business Media LLC. - 1573-4889 .- 0030-770X. ; 97:5-6, s. 527-538
-
Tidskriftsartikel (refereegranskat)abstract
- The effect of hydrogen on oxygen permeability has been studied in a diluted Pd–Cr alloy in dual- and single- atmosphere conditions between 600 and 950 °C. The 0.3 mm thick Pd–1.5Cr foil was exposed in dry and humid air as well as in dual-atmosphere conditions, with one sample surface being exposed to air and one to hydrogen, as encountered in solid oxide fuel cells. At all temperatures, Cr oxidized internally forming internal oxidation zones which were measured in metallographic cross sections. Below 800 °C, an external layer of PdO formed on the surface decreasing the internal oxidation kinetics. No measurable effect of hydrogen on the internal oxidation of Cr in Pd has been detected.
|
|
| 29. |
- Chyrkin, Anton, 1984, et al.
(författare)
-
High temperature oxidation of AISI 441 in simulated solid oxide fuel cell anode side conditions
- 2022
-
Ingår i: Corrosion Science. - : Elsevier BV. - 0010-938X. ; 203
-
Tidskriftsartikel (refereegranskat)abstract
- This study investigates the corrosion of AISI 441 in simulated anode conditions of solid oxide fuel cells (SOFCs). Several parameters such as temperature, humidity, surface condition, pre-oxidation temperature and environment, were investigated. Samples pre-oxidized at 800 ºC were protective at 550–900 ºC, while as-received samples showed protective behavior only at 900 ºC. Additional exposures performed at 600 ºC revealed the negative effect of increasing steam concentration, the beneficial effect of grinding, while pre-oxidation at 600 ºC did not improve the protectiveness. The role and the interplay of the aforementioned factors are discussed.
|
|
| 30. |
- Chyrkin, Anton, 1984, et al.
(författare)
-
Internal Oxidation of a Fe-Cr Binary Alloy at 700-900 degrees C: The Role of Hydrogen and Water Vapor
- 2022
-
Ingår i: Oxidation of Metals. - : Springer Science and Business Media LLC. - 1573-4889 .- 0030-770X. ; 98:3-4, s. 273-289
-
Tidskriftsartikel (refereegranskat)abstract
- Internal oxidation of Fe-2.25Cr has been studied in Fe/FeO Rhines pack (RP) and H-2/H2O gas mixtures at 700-900 degrees C. A novel exposure technique allowing RP experiments in dual atmosphere conditions was developed. No measurable effect of hydrogen on lattice oxygen permeability in ferrite could be detected: neither in single nor in dual atmosphere conditions. The H-2/H2O atmosphere was found to induce stronger oxidation attack at alloy grain boundaries resulting in a morphology similar to intergranular stress corrosion cracking often reported in nuclear technology. The intergranular oxidation attack was demonstrated to be independent of the dual atmosphere effect, i.e., hydrogen dissolved in the alloy.
|
|
| 31. |
- Cline, J Mark, et al.
(författare)
-
The placenta in toxicology. Part III : Pathologic assessment of the placenta
- 2014
-
Ingår i: Toxicologic pathology (Print). - : Sage Publications. - 0192-6233 .- 1533-1601. ; 42:2, s. 339-344
-
Tidskriftsartikel (refereegranskat)abstract
- This short review is derived from the peer-reviewed literature and the experience and case materials of the authors. Brief illustrated summaries are presented on the gross and histologic normal anatomy of rodent and macaque placentas, including typical organ weights, with comments on differences from the human placenta. Common incidental findings, background lesions, and induced toxic lesions are addressed, and a recommended strategy for pathologic evaluation of placentas is provided.
|
|
| 32. |
- Davidsson, Kent, 1967, et al.
(författare)
-
Potassium, chlorine, and sulfur in ash, particles, deposits, and corrosion during wood combustion in a circulating fluidized-bed boiler
- 2007
-
Ingår i: Energy & Fuels. - : American Chemical Society (ACS). - 1520-5029 .- 0887-0624. ; 21:1, s. 71-81
-
Tidskriftsartikel (refereegranskat)abstract
- The effect of the addition of chlorine and/or sulfur to the fuel on fly ash composition, deposit formation, and superheater corrosion has been studied during biomass combustion in a circulating fluidized-bed boiler. The chlorine (HCl (aq)) and sulfur (SO2 (g)) were added in proportions of relevance for the potassium chemistry. The composition of the bottom and the fly ashes was analyzed. Gas and particle measurements were performed downstream of the cyclone before the convection pass and the flue gas composition was recorded in the stack with a series of standard instruments and an FTIR analyzer. At the position downstream of the cyclone, a deposit probe was situated, simulating a superheater tube. Deposits on the probe and initial corrosion were examined. It is concluded that addition of sulfur and chlorine increases the formation of submicron particles leading to deposition of potassium sulfate and chloride. The results compare well with earlier work based on laboratory-scale experiments concerning effects of chlorine and sulfur on potassium chemistry.
|
|
| 33. |
- Deppert, Knut, et al.
(författare)
-
Aerosol fabrication of nanocrystals of InP
- 1999
-
Ingår i: Japanese Journal of Applied Physics, Part 1: Regular Papers and Short Notes and Review Papers. - 0021-4922. ; 38:2 B, s. 1056-1059
-
Tidskriftsartikel (refereegranskat)abstract
- Nanocrystals of indium phosphide, with diameters of around 10nm, have been produced via an aerosol route. The method is based on the formation of monodisperse indium droplets and the subsequent reaction with phosphine at elevated temperature. The size of the final InP nanocrystal is self-limited by the size of the introduced size-selected In droplet. This size can be tuned carefully, thus this method allows a narrow size distribution of the nanocrystals. The kinetics of the reaction of In to produce InP depends on the temperature and the phosphine flow. Extensive high resolution transmission electron microscopy studies lead to a consistent picture of the process. Our approach opens the possibility for efficient production of size-selected semiconductor nanocrystals and it will allow new types of self-assembly and control of quantum dots.
|
|
| 34. |
- Deppert, Knut, et al.
(författare)
-
Size-selected nanocrystals of III-V semiconductor materials by the aerotaxy method
- 1998
-
Ingår i: Journal of Aerosol Science. - 0021-8502. ; 29:5-6, s. 737-748
-
Tidskriftsartikel (refereegranskat)abstract
- In this paper we present a fabrication route to produce size-selected III-V semiconductor nanocrystals via a simple, reliable, and efficient aerosol route. Since this approach includes the reaction of aerosol particles and a self-organized growth of a new compound, all in the aerosol phase, we call this process aerotaxy. Size-selected nanocrystals of different III-V compounds in a diameter range below 20 nm were fabricated using this method. Through the reaction of arsine with gallium droplets or of phosphine with indium droplets, GaAs and InP clusters were formed. Our approach opens the possibility to produce contamination-free and size-selected nanocrystals of compound semiconductor materials with considerable freedom in composition and size.
|
|
| 35. |
- Egecioglu, Emil, 1977, et al.
(författare)
-
Growth hormone receptor deficiency results in blunted ghrelin feeding response, obesity, and hypolipidemia in mice.
- 2006
-
Ingår i: American journal of physiology. Endocrinology and metabolism. - : American Physiological Society. - 0193-1849 .- 1522-1555. ; 290:2
-
Tidskriftsartikel (refereegranskat)abstract
- We have previously shown that growth hormone (GH) overexpression in the brain increased food intake, accompanied with increased hypothalamic agouti-related protein (AgRP) expression. Ghrelin, which stimulates both appetite and GH secretion, was injected intracerebroventricularly to GHR-/- and littermate control (+/+) mice to determine whether ghrelin's acute effects on appetite are dependent on GHR signaling. GHR-/- mice were also analyzed with respect to serum levels of lipoproteins, apolipoprotein (apo)B, leptin, glucose, and insulin as well as body composition. Central injection of ghrelin into the third dorsal ventricle increased food consumption in +/+ mice, whereas no change was observed in GHR-/- mice. After ghrelin injection, AgRP mRNA expression in the hypothalamus was higher in +/+ littermates than in GHR-/- mice, indicating a possible importance of AgRP in the GHR-mediated effect of ghrelin. Compared with controls, GHR-/- mice had increased food intake, leptin levels, and total and intra-abdominal fat mass per body weight and deceased lean mass. Moreover, serum levels of triglycerides, LDL and HDL cholesterol, and apoB, as well as glucose and insulin levels were lower in the GHR-/- mice. In summary, ghrelin's acute central action to increase food intake requires functionally intact GHR signaling. Long-term GHR deficiency in mice is associated with high plasma leptin levels, obesity, and increased food intake but a marked decrease in all lipoprotein fractions.
|
|
| 36. |
- Falk Windisch, Hannes, 1984, et al.
(författare)
-
Chromium vaporization from mechanically deformed pre-coated interconnects in Solid Oxide Fuel Cells
- 2015
-
Ingår i: Journal of Power Sources. - : Elsevier BV. - 0378-7753. ; 297, s. 217-223
-
Tidskriftsartikel (refereegranskat)abstract
- Cathode poisoning, associated with Cr evaporation from interconnect material, is one of the most important degradation mechanisms in Solid Oxide Fuel Cells when Cr2O3-forming steels are used as the interconnect material. Coating these steels with a thin Co layer has proven to decrease Cr vaporization. To reduce production costs, it is suggested that thin metallic PVD coatings be applied to each steel strip before pressing the material into interconnect shape. This process would enable high volume production without the need for an extra post-coating step. However, when the pre-coated material is mechanically deformed, cracks may form and lower the quality of the coating. In the present study, Chromium volatilization is measured in an air-3% H2O environment at 850 C for 336 h. Three materials coated with 600 nm Co are investigated and compared to an uncoated material. The effect of deformation is investigated on real interconnects. Microscopy observations reveal the presence of cracks in the order of several μm on the deformed pre-coated steel. However, upon exposure, the cracks can heal and form a continuous surface oxide rich in Co and Mn. As an effect of the rapid healing, no increase in Cr vaporization is measured for the pre-coated material.
|
|
| 37. |
- Falk Windisch, Hannes, 1984, et al.
(författare)
-
Co- and Ce/Co-coated ferritic stainless steel as interconnect material for Intermediate Temperature Solid Oxide Fuel Cells
- 2017
-
Ingår i: Journal of Power Sources. - : Elsevier BV. - 0378-7753. ; 343, s. 1-10
-
Tidskriftsartikel (refereegranskat)abstract
- Chromium species volatilization, oxide scale growth, and electrical scale resistance were studied at 650 and 750 °C for thin metallic Co- and Ce/Co-coated steels intended to be utilized as the interconnect material in Intermediate Temperature Solid Oxide Fuel Cells (IT-SOFC). Mass gain was recorded to follow oxidation kinetics, chromium evaporation was measured using the denuder technique and Area Specific Resistance (ASR) measurements were carried out on 500 h pre-exposed samples. The microstructure of thermally grown oxide scales was characterized using Scanning Electron Microscopy (SEM), Scanning Transmission Electron Microscopy (STEM), and Energy Dispersive X-Ray Analysis (EDX). The findings of this study show that a decrease in temperature not only leads to thinner oxide scales and less Cr vaporization but also to a significant change in the chemical composition of the oxide scale. Very low ASR values (below 10 m? cm2) were measured for both Co- and Ce/Co-coated steel at 650 and 750 °C, indicating that the observed change in the chemical composition of the Co spinel does not have any noticeable influence on the ASR. Instead it is suggested that the Cr2O3 scale is expected to be the main contributor to the ASR, even at temperatures as low as 650 °C.
|
|
| 38. |
- Falk Windisch, Hannes, 1984, et al.
(författare)
-
Determination of the oxide scale growth mechanism using 18O-tracer experiments in combination with Transmission Electron Microscopy and nanoscale Secondary Ion Mass Spectrometry
- 2018
-
Ingår i: Materials Characterization. - : Elsevier BV. - 1044-5803. ; 136, s. 128-133
-
Tidskriftsartikel (refereegranskat)abstract
- Two-stage 18 O 2 / 16 O 2 exposures can be used to investigate the effect that alloying elements, secondary phases, or surface treatments have on the high temperature oxidation behaviour of certain materials. During subsequent exposures to 16 O 2 - and 18 O 2 -rich atmospheres, 16 O- and 18 O-rich layers are formed. Analysis of the layers using Seco ndary Ion Mass Spectrometry (SIMS) depth profiling allows for conclusions to be drawn about the oxide scale growth mechanism. The conclusions are, however, not entirely unambiguous due to the limited lateral resolution of the technology. Rough surface topography and the thickness variation of the oxide scale over the analysed volume add to the ambiguity of the findings. In this study, an Fe-20%Cr alloy was exposed to both 18 O- and 16 O-rich environments at 850 °C. Two methods were used to analyse the thermally grown Cr 2 O 3 scale: (1) traditional SIMS depth profiling and (2) preparation of a cross-sectional lamellae for Transmission Electron Microscopy (TEM), which, subsequently, was analysed in a NanoSIMS. The NanoSIMS 16 O and 18 O elemental maps were then superimposed on the TEM image. In comparison with traditional SIMS depth profiling, the nanoSIMS elemental maps reveal detailed information about local oxide growth in different parts of an oxide scale. Moreover, a clear 16 O/ 18 O interface can be seen in the nanoSIMS maps, which is not the case in the sputter depth profiles. The findings of this study show that the aforementioned issues associated with sputter depth profiling can be eliminated by mapping a cross-section of an oxide scale using high resolution nanoSIMS.
|
|
| 39. |
- Falk Windisch, Hannes, 1984, et al.
(författare)
-
Influence of chromium evaporation and oxidation on interconnect steels at 650-850°C
- 2013
-
Ingår i: ECS Transactions. - : The Electrochemical Society. - 1938-5862 .- 1938-6737. ; 57:1, s. 2225-2233
-
Konferensbidrag (refereegranskat)abstract
- Chromium evaporation and oxide scale growth are two important degradation mechanisms in SOFCs when chromia-forming alloys are used as the interconnect material. In this paper the influence of temperature on both mechanisms were studied. Isothermal exposures were carried out for 24, 168 and 500h at 650, 750 and 850°C in an air-3%H2O atmosphere. In the second part uncoated and metallic nano-coated samples were exposed for 3000h. This study clearly points out the relevance of Cr-evaporation at reduced temperatures and the importance of high quality coatings not only to protect the cell from cathode poisoning but also to reduce the risk of Cr-depletion within the interconnect steel.
|
|
| 40. |
- Falk Windisch, Hannes, 1984, et al.
(författare)
-
Metallic thin-film Co- and Ce/Co-coated steels as interconnect material in IT-SOFC
- 2017
-
Ingår i: ECS Transactions. - : The Electrochemical Society. - 1938-5862 .- 1938-6737. - 9781607685395 ; 78:1, s. 1607-1614
-
Konferensbidrag (refereegranskat)abstract
- Cr vaporization, oxide scale growth, and the electrical scale resistance (ASR) were studied at 650°C on coated interconnects intended for IT-SOFC applications. The custom-made SOFC interconnect steel Sanergy HT was coated with thin-film Co- and Ce/Co-coatings and compared to the less expensive substrate steel AISI 441 which was coated with Ce/Co and a 15-20 μm thick commercial MCO-coating. All coated materials mitigated Cr vaporization, and due to the very thin chromia scales formed at the low exposure temperature, ASR values below 10 mΩcm 2 were measured for all materials after 500 h at 650°C. The results in this study show that thin-film metallic Co- and Ce/Co-coated steels show excellent properties as interconnect materials for IT-SOFCs. Thick MCO-coatings can also be used at low temperatures; however, the coating method might be a critical issue for lowtemperature applications.
|
|
| 41. |
- Falk Windisch, Hannes, 1984, et al.
(författare)
-
Pre-coated Ce/Co-coated steel: Mitigating Cr vaporization, increasing corrosion resistance at competitive cost
- 2015
-
Ingår i: ECS Transactions. - : The Electrochemical Society. - 1938-5862 .- 1938-6737. - 9781607685395 ; 68:1, s. 1617-1623
-
Konferensbidrag (refereegranskat)abstract
- Cr vaporization and oxide scale growth are probably the two most detrimental degradation mechanisms associated to Cr2O3-forming alloys as interconnect material in SOFC. Both issues can be improved by the application of coatings. However, the use of coatings increase material cost. To reduce coating costs it is suggested that large amounts of steel can be coated before shaping the pre-coated material into an interconnect. The present study investigates the effectiveness of thin Ce and Co coatings on the cost effective steel AISI 441 with respect to Cr vaporization and corrosion resistance. Furthermore, the effect of mechanical deformation of the coated steel is examined. The results revealed that when the pre-coated steel is deformed, large cracks are formed. However, upon exposure those cracks can heal forming a continuous surface oxide rich in Co and Mn. As an effect of the rapid healing, no increase in Cr vaporization was measured.
|
|
| 42. |
- Falk Windisch, Hannes, 1984, et al.
(författare)
-
The Effect of Metallic Co-Coating Thickness on Ferritic Stainless Steels Intended for Use as Interconnect Material in Intermediate Temperature Solid Oxide Fuel Cells
- 2018
-
Ingår i: Oxidation of Metals. - : Springer Science and Business Media LLC. - 1573-4889 .- 0030-770X. ; 89:1-2, s. 233-250
-
Tidskriftsartikel (refereegranskat)abstract
- The effect of metallic Co-coating thickness on ferritic stainless steels is investigated. This material is suggested to be used as interconnect material in intermediate temperature solid oxide fuel cells. Uncoated, 200-, 600-, 1000-, and 1500-nm Co-coated Sanergy HT is isothermally exposed for up to 500 h in air at 650 A degrees C. Mass gain is recorded to follow oxidation kinetics, and area-specific resistance (ASR) measurements are conducted on samples exposed for 168 and 500 h. The microstructure of the thermally grown oxide scales is characterized utilizing scanning electron microscopy and energy-dispersive X-ray analysis on broad ion beam-milled cross sections. A clear increase in ASR as a function of Co-coating thickness is observed. However, the increase in ASR, as an effect of a thicker Co-coating, is correlated with thicker (Cr,Fe)(2)O-3 scales formed on these materials and not to an increase in Co spinel top layer thickness.
|
|
| 43. |
- Falk Windisch, Hannes, 1984, et al.
(författare)
-
The effect of temperature on chromium vaporization and oxide scale growth on interconnect steels for Solid Oxide Fuel Cells
- 2015
-
Ingår i: Journal of Power Sources. - : Elsevier BV. - 0378-7753. ; 287, s. 25-35
-
Tidskriftsartikel (refereegranskat)abstract
- Chromium vaporization and oxide scale growth are probably the two most important degradation mechanisms associated with the interconnect in Solid Oxide Fuel Cells (SOFCs) when Cr2O3-forming alloys are used as the interconnect material. This study examines the influence of temperature on both mechanisms. Two commercially available steels; Crofer 22 H and Sanergy HT, were isothermally exposed at 650, 750 and 850 °C in an air-3% H2O atmosphere with a high flow rate. Volatile chromium species were collected using the denuder technique. The microstructure of thermally grown oxide scales was characterized using Scanning Electron Microscopy (SEM), Energy Dispersive X-Ray Analysis (EDX) and X-Ray Diffraction (XRD). The findings of this study show that although Cr evaporation is reduced with lower temperature, its relative importance compared to oxide scale growth is greater.
|
|
| 44. |
- Frisch, Morten, et al.
(författare)
-
[Sexually transmitted infection as a cause of anal cancer]
- 1998
-
Ingår i: Ugeskrift for læger. - 0041-5782 .- 1603-6824. ; 160:49, s. 7109-7117
-
Tidskriftsartikel (refereegranskat)abstract
- Interviews were carried out with 423 women and 93 men with invasive or in situ anal cancer in Denmark and Sweden in a search for clues to the aetiology of this neoplasm. Patients with rectal adenocarcinoma (n = 534) and persons drawn from the background population (n = 554) served as controls. Multivariate logistic regression analyses confirmed previous observations of a strong association between either male homosexual experience or a history of anogenital warts and the risk for anal cancer. Moreover, hitherto unknown, but strong and consistent associations were observed between measures of high heterosexual activity and the risk for anal cancer among both sexes. Polymerase chain reaction analysis revealed human papilloma-virus DNA in the majority (88%) of anal cancer specimens but in none of 20 examined rectal adenocarcinomas. It is concluded that most anal cancers appear to be caused by sexually transmitted types of human papillomaviruses and, consequently, that anal cancer is a potentially preventable neoplasm.
|
|
| 45. |
- Frisch, Morten, et al.
(författare)
-
Sexually transmitted infection as a cause of anal cancer
- 1997
-
Ingår i: New England Journal of Medicine. - 0028-4793 .- 1533-4406. ; 337:19, s. 1350-1358
-
Tidskriftsartikel (refereegranskat)abstract
- BACKGROUND: The incidence of anal cancer has increased in recent decades, particularly among women. To identify underlying risk factors, we conducted a population-based case-control study in Denmark and Sweden. METHODS: We conducted telephone interviews with 324 women and 93 men in whom invasive or in situ anal cancer was diagnosed between 1991 and 1994, 534 controls with adenocarcinoma of the rectum, and 554 population controls. The interviews covered a wide spectrum of possible risk factors for anal cancer. Odds ratios were calculated by logistic regression. Specimens of anal-cancer tissue and samples of rectal adenocarcinomas were tested for human papillomavirus (HPV) DNA with the polymerase chain reaction. RESULTS: Multivariate analysis revealed consistent and statistically significant associations between measures of sexual promiscuity and the risk of anal cancer in both men and women. There was a significant trend toward an association between higher numbers of partners of the opposite sex in women (P<0.001) and men (P<0.05) and strong associations with a variety of venereal diseases. In women, receptive anal intercourse, particularly before the age of 30 years, and venereal infections in the partner were also associated with an increased risk (odds ratios, 3.4 and 2.4, respectively). Fifteen percent of the men with anal cancer reported having had homosexual contact, as compared with none of the controls (P<0.001). High-risk types of HPV, notably HPV-16, were detected in 84 percent of the anal-cancer specimens examined, whereas all rectal-adenocarcinoma specimens tested were negative for HPV. CONCLUSIONS: Our study provides strong evidence that a sexually transmitted infection causes anal cancer. The presence of high-risk types of HPV, notably HPV-16 (which is known to cause cancer of the cervix), in the majority of anal-cancer tissue specimens suggests that most anal cancers are potentially preventable.
|
|
| 46. |
- Froitzheim, Jan, 1981, et al.
(författare)
-
Chromium evaporation of Coated and uncoated FE-22CR steels investigated by a novel denuder technique
- 2009
-
Ingår i: 3rd European Fuel Cell Technology and Applications - Piero Lunghi Conference, EFC 2009; Rome; Italy; 15 December 2009 through 18 December 2009. - 9788882862114 ; , s. 77-78
-
Konferensbidrag (refereegranskat)abstract
- The formation of volatile chromium species is a major problem concerning metallic interconnects for Solid Oxide Fuel Cells (SOFC). This problem is known and a number of routes, usually in the form of coatings, has been presented to overcome this problem. This paper investigates the influence of thin metallic films which can be applied by a low cost process. The measurements are carried out by a novel denuder technique where volatile chromium species are collected as sodium chromate. This technique allows the quantification of chromium evaporation in a time resolved manner. Coated and uncoated samples of ferritic steels developed for SOFC applications are investigated at 850°C in a N2-O2-H2O environment.
|
|
| 47. |
- Froitzheim, Jan, 1981, et al.
(författare)
-
Cr evaporation of metallic interconnects: A novel method for quantification
- 2009
-
Ingår i: ECS Transactions. - : The Electrochemical Society. - 1938-5862 .- 1938-6737. - 9781566777391 ; 25:2 PART 2, s. 1423-1428
-
Konferensbidrag (refereegranskat)abstract
- Chromium evaporation from metallic interconnects in SOFCs is commonly poisoning the cathode of SOFCs. To reduce chromium evaporation, rather thick coatings have been deposited using various coating techniques. In this study, a 22% Cr ferritic steel has been coated with thin films (
|
|
| 48. |
- Froitzheim, Jan, 1981, et al.
(författare)
-
Investigation of Chromium Volatilization from FeCr Interconnects by a Denuder Technique
- 2010
-
Ingår i: Journal of the Electrochemical Society. - : The Electrochemical Society. - 1945-7111 .- 0013-4651. ; 157:9, s. B1295-B1300
-
Tidskriftsartikel (refereegranskat)abstract
- A technique is presented for accurate and time-resolved quantification of chromium volatilization from alloys at high temperature. A denuder tube which is coated with Na2CO3 is placed downstream of the samples. CrO2(OH)(2) that evaporated from the samples is collected on the denuder and converted to the thermally stable Na2CrO4. The chromate is then dissolved in water and determined quantitatively. Three commercially available ferritic 22% Cr steels intended for use as solid oxide fuel cell interconnect materials (Sanergy HT, Crofer 22 APU, and ZMG 232) have been investigated with respect to chromium volatilization and oxidation rate. The effect on chromium volatilization of a submicrometer cobalt coating on the steel surface is reported. Comparisons are made with a conventional thick ceramic coating. The experiments are carried out at 850 degrees C in N-2 - 20% O-2 - 3% H2O atmosphere. The submicrometer Co coatings proved to be very efficient, reducing Cr volatilization by 1 order of magnitude. Microscopic studies show that both uncoated steel and steel coated with a submicrometer cobalt film develop two-layered oxide scales with the bottom part consisting of a Cr-rich corundum-type oxide. The uncoated samples develop a top layer consisting of (Cr, Mn)(3)O-4 oxide, whereas the Co-coated samples exhibit a top layer consisting of Co-rich spinel oxide. (C) 2010 The Electrochemical Society. [DOI: 10.1149/1.3462987] All rights reserved.
|
|
| 49. |
- Froitzheim, Jan, 1981, et al.
(författare)
-
Long term study of Cr evaporation and high temperature corrosion behaviour of Co coated ferritic steel for solid oxide fuel cell interconnects
- 2012
-
Ingår i: Journal of Power Sources. - : Elsevier BV. - 0378-7753. ; 220, s. 217-227
-
Tidskriftsartikel (refereegranskat)abstract
- The oxidation behaviour of the uncoated ferritic Fe-22Cr steel Sanergy HT is compared with an 640 nm Co coated version of the same material. The materials have been subject to corrosion and Cr volatilization measurements in air for up to 3000 h at 850 degrees C. Oxidation tests have been carried out both isothermal and discontinuously. The volatilization measurements were carried out using a recently developed denuder technique, which allows to quantify Cr evaporation in a time resolved manner. The oxidation process is studied from very initial phases (>15 s) to long term behaviour (3000 h). The formed oxide scales are analysed by XRD, SEM/EDX as well as TEM/EDX.The results show that both materials form an oxide scale with an inner layer of Cr2O3 and a spinel layer on top. In the case of the uncoated material, the spinel layer is of (Cr,Mn)(3)O-4 type while in the presence of a Co coating a (Co,Mn,Fe)(3)O-4 is formed. The Cr evaporation measurements show that despite the fact that the Co coating is very thin (640 nm) it effectively blocks Cr evaporation for at least 3000 h. This is in line with TEM analysis showing that after 3000 h there is only a low Cr content in the outer oxide scale. This long term stability indicates the suitability of the coated material as solid oxide fuel cell (SOFC) interconnect.
|
|
| 50. |
- Froitzheim, Jan, 1981, et al.
(författare)
-
Multifunctional Nano-Coatings for SOFC Interconnects
- 2011
-
Ingår i: ECS Transactions. - : The Electrochemical Society. - 1938-5862 .- 1938-6737. - 9781607682127 ; 35:1, s. 2503-2508
-
Konferensbidrag (refereegranskat)abstract
- Chromium evaporation from metallic interconnects in SOFCs is commonly poisoning the cathode of SOFCs. To reduce chromium evaporation, rather thick coatings have been deposited using various coating techniques. In this study a 22% Cr ferritic steel has been coated with multilayered nano coatings. The best coatings combine a Cr retention layer (800nm Co) with a 10nm layer of Ce that reduces the corrosion rate of the metallic interconnect. Such coatings might be a cost efficient way to meet the required lifetime targets for SOFC interconnects. The Cr evaporation measurements are carried out with a recently developed denuder technique which allows time resolved quantification of volatile chromium species. Downstream of the samples a denuder tube is placed which collects any CrO2(OH)(2) evaporating from the samples.
|
|
