| 1. |
-
- 2018
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 58:1
-
Forskningsöversikt (refereegranskat)
|
|
| 2. |
- Krasilnikov, A., et al.
(författare)
-
Evidence of 9 Be + p nuclear reactions during 2ω CH and hydrogen minority ICRH in JET-ILW hydrogen and deuterium plasmas
- 2018
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 58:2
-
Tidskriftsartikel (refereegranskat)abstract
- The intensity of 9Be + p nuclear fusion reactions was experimentally studied during second harmonic (2ω CH) ion-cyclotron resonance heating (ICRH) and further analyzed during fundamental hydrogen minority ICRH of JET-ILW hydrogen and deuterium plasmas. In relatively low-density plasmas with a high ICRH power, a population of fast H+ ions was created and measured by neutral particle analyzers. Primary and secondary nuclear reaction products, due to 9Be + p interaction, were observed with fast ion loss detectors, γ-ray spectrometers and neutron flux monitors and spectrometers. The possibility of using 9Be(p, d)2α and 9Be(p, α)6Li nuclear reactions to create a population of fast alpha particles and study their behaviour in non-active stage of ITER operation is discussed in the paper.
|
|
| 3. |
|
|
| 4. |
|
|
| 5. |
|
|
| 6. |
|
|
| 7. |
|
|
| 8. |
|
|
| 9. |
|
|
| 10. |
|
|
| 11. |
|
|
| 12. |
|
|
| 13. |
|
|
| 14. |
|
|
| 15. |
|
|
| 16. |
|
|
| 17. |
|
|
| 18. |
|
|
| 19. |
|
|
| 20. |
- Murari, A., et al.
(författare)
-
A control oriented strategy of disruption prediction to avoid the configuration collapse of tokamak reactors
- 2024
-
Ingår i: Nature Communications. - 2041-1723 .- 2041-1723. ; 15:1
-
Tidskriftsartikel (refereegranskat)abstract
- The objective of thermonuclear fusion consists of producing electricity from the coalescence of light nuclei in high temperature plasmas. The most promising route to fusion envisages the confinement of such plasmas with magnetic fields, whose most studied configuration is the tokamak. Disruptions are catastrophic collapses affecting all tokamak devices and one of the main potential showstoppers on the route to a commercial reactor. In this work we report how, deploying innovative analysis methods on thousands of JET experiments covering the isotopic compositions from hydrogen to full tritium and including the major D-T campaign, the nature of the various forms of collapse is investigated in all phases of the discharges. An original approach to proximity detection has been developed, which allows determining both the probability of and the time interval remaining before an incoming disruption, with adaptive, from scratch, real time compatible techniques. The results indicate that physics based prediction and control tools can be developed, to deploy realistic strategies of disruption avoidance and prevention, meeting the requirements of the next generation of devices.
|
|
| 21. |
- Joffrin, E., et al.
(författare)
-
Overview of the JET preparation for deuterium-tritium operation with the ITER like-wall
- 2019
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 59:11
-
Forskningsöversikt (refereegranskat)abstract
- For the past several years, the JET scientific programme (Pamela et al 2007 Fusion Eng. Des. 82 590) has been engaged in a multi-campaign effort, including experiments in D, H and T, leading up to 2020 and the first experiments with 50%/50% D-T mixtures since 1997 and the first ever D-T plasmas with the ITER mix of plasma-facing component materials. For this purpose, a concerted physics and technology programme was launched with a view to prepare the D-T campaign (DTE2). This paper addresses the key elements developed by the JET programme directly contributing to the D-T preparation. This intense preparation includes the review of the physics basis for the D-T operational scenarios, including the fusion power predictions through first principle and integrated modelling, and the impact of isotopes in the operation and physics of D-T plasmas (thermal and particle transport, high confinement mode (H-mode) access, Be and W erosion, fuel recovery, etc). This effort also requires improving several aspects of plasma operation for DTE2, such as real time control schemes, heat load control, disruption avoidance and a mitigation system (including the installation of a new shattered pellet injector), novel ion cyclotron resonance heating schemes (such as the three-ions scheme), new diagnostics (neutron camera and spectrometer, active Alfven eigenmode antennas, neutral gauges, radiation hard imaging systems...) and the calibration of the JET neutron diagnostics at 14 MeV for accurate fusion power measurement. The active preparation of JET for the 2020 D-T campaign provides an incomparable source of information and a basis for the future D-T operation of ITER, and it is also foreseen that a large number of key physics issues will be addressed in support of burning plasmas.
|
|
| 22. |
|
|
| 23. |
|
|
| 24. |
- Meyer, H., et al.
(författare)
-
Overview of progress in European medium sized tokamaks towards an integrated plasma-edge/wall solution
- 2017
-
Ingår i: Nuclear Fusion. - : Institute of Physics Publishing (IOPP). - 0029-5515 .- 1741-4326. ; 57:10
-
Tidskriftsartikel (refereegranskat)abstract
- Integrating the plasma core performance with an edge and scrape-off layer (SOL) that leads to tolerable heat and particle loads on the wall is a major challenge. The new European medium size tokamak task force (EU-MST) coordinates research on ASDEX Upgrade (AUG), MAST and TCV. This multi-machine approach within EU-MST, covering a wide parameter range, is instrumental to progress in the field, as ITER and DEMO core/pedestal and SOL parameters are not achievable simultaneously in present day devices. A two prong approach is adopted. On the one hand, scenarios with tolerable transient heat and particle loads, including active edge localised mode (ELM) control are developed. On the other hand, divertor solutions including advanced magnetic configurations are studied. Considerable progress has been made on both approaches, in particular in the fields of: ELM control with resonant magnetic perturbations (RMP), small ELM regimes, detachment onset and control, as well as filamentary scrape-off-layer transport. For example full ELM suppression has now been achieved on AUG at low collisionality with n = 2 RMP maintaining good confinement H-H(98,H-y2) approximate to 0.95. Advances have been made with respect to detachment onset and control. Studies in advanced divertor configurations (Snowflake, Super-X and X-point target divertor) shed new light on SOL physics. Cross field filamentary transport has been characterised in a wide parameter regime on AUG, MAST and TCV progressing the theoretical and experimental understanding crucial for predicting first wall loads in ITER and DEMO. Conditions in the SOL also play a crucial role for ELM stability and access to small ELM regimes.
|
|
| 25. |
- Meyer, H., et al.
(författare)
-
Overview of progress in European medium sized tokamaks towards an integrated plasma-edge/wall solution
- 2017
-
Ingår i: Nuclear Fusion. - : Institute of Physics Publishing (IOPP). - 0029-5515 .- 1741-4326. ; 57:10
-
Tidskriftsartikel (refereegranskat)abstract
- Integrating the plasma core performance with an edge and scrape-off layer (SOL) that leads to tolerable heat and particle loads on the wall is a major challenge. The new European medium size tokamak task force (EU-MST) coordinates research on ASDEX Upgrade (AUG), MAST and TCV. This multi-machine approach within EU-MST, covering a wide parameter range, is instrumental to progress in the field, as ITER and DEMO core/pedestal and SOL parameters are not achievable simultaneously in present day devices. A two prong approach is adopted. On the one hand, scenarios with tolerable transient heat and particle loads, including active edge localised mode (ELM) control are developed. On the other hand, divertor solutions including advanced magnetic configurations are studied. Considerable progress has been made on both approaches, in particular in the fields of: ELM control with resonant magnetic perturbations (RMP), small ELM regimes, detachment onset and control, as well as filamentary scrape-off-layer transport. For example full ELM suppression has now been achieved on AUG at low collisionality with n = 2 RMP maintaining good confinement H-H(98,H-y2) approximate to 0.95. Advances have been made with respect to detachment onset and control. Studies in advanced divertor configurations (Snowflake, Super-X and X-point target divertor) shed new light on SOL physics. Cross field filamentary transport has been characterised in a wide parameter regime on AUG, MAST and TCV progressing the theoretical and experimental understanding crucial for predicting first wall loads in ITER and DEMO. Conditions in the SOL also play a crucial role for ELM stability and access to small ELM regimes.
|
|
| 26. |
- Meyer, H., et al.
(författare)
-
Overview of physics results from MAST towards ITER/DEMO and the MAST Upgrade
- 2013
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 0029-5515 .- 1741-4326. ; 53:10, s. 104008-
-
Tidskriftsartikel (refereegranskat)abstract
- New diagnostic, modelling and plant capability on the Mega Ampere Spherical Tokamak (MAST) have delivered important results in key areas for ITER/DEMO and the upcoming MAST Upgrade, a step towards future ST devices on the path to fusion currently under procurement. Micro-stability analysis of the pedestal highlights the potential roles of micro-tearing modes and kinetic ballooning modes for the pedestal formation. Mitigation of edge localized modes (ELM) using resonant magnetic perturbation has been demonstrated for toroidal mode numbers n = 3, 4, 6 with an ELM frequency increase by up to a factor of 9, compatible with pellet fuelling. The peak heat flux of mitigated and natural ELMs follows the same linear trend with ELM energy loss and the first ELM-resolved T-i measurements in the divertor region are shown. Measurements of flow shear and turbulence dynamics during L-H transitions show filaments erupting from the plasma edge whilst the full flow shear is still present. Off-axis neutral beam injection helps to strongly reduce the redistribution of fast-ions due to fishbone modes when compared to on-axis injection. Low-k ion-scale turbulence has been measured in L-mode and compared to global gyro-kinetic simulations. A statistical analysis of principal turbulence time scales shows them to be of comparable magnitude and reasonably correlated with turbulence decorrelation time. T-e inside the island of a neoclassical tearing mode allow the analysis of the island evolution without assuming specific models for the heat flux. Other results include the discrepancy of the current profile evolution during the current ramp-up with solutions of the poloidal field diffusion equation, studies of the anomalous Doppler resonance compressional Alfven eigenmodes, disruption mitigation studies and modelling of the new divertor design for MAST Upgrade. The novel 3D electron Bernstein synthetic imaging shows promising first data sensitive to the edge current profile and flows.
|
|
| 27. |
- Lloyd, B., et al.
(författare)
-
Overview of physics results from MAST
- 2011
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 51:9, s. 094013 (paper no.)-
-
Tidskriftsartikel (refereegranskat)abstract
- Major developments on the Mega Amp Spherical Tokamak (MAST) have enabled important advances in support of ITER and the physics basis of a spherical tokamak (ST) based component test facility (CTF), as well as providing new insight into underlying tokamak physics. For example, L-H transition studies benefit from high spatial and temporal resolution measurements of pedestal profile evolution (temperature, density and radial electric field) and in support of pedestal stability studies the edge current density profile has been inferred from motional Stark effect measurements. The influence of the q-profile and E x B flow shear on transport has been studied in MAST and equilibrium flow shear has been included in gyro-kinetic codes, improving comparisons with the experimental data. H-modes exhibit a weaker q and stronger collisionality dependence of heat diffusivity than implied by IPB98(gamma, 2) scaling, which may have important implications for the design of an ST-based CTF. ELM mitigation, an important issue for ITER, has been demonstrated by applying resonant magnetic perturbations (RMPs) using both internal and external coils, but full stabilization of type-I ELMs has not been observed. Modelling shows the importance of including the plasma response to the RMP fields. MAST plasmas with q > 1 and weak central magnetic shear regularly exhibit a long-lived saturated ideal internal mode. Measured plasma braking in the presence of this mode compares well with neo-classical toroidal viscosity theory. In support of basic physics understanding, high resolution Thomson scattering measurements are providing new insight into sawtooth crash dynamics and neo-classical tearing mode critical island widths. Retarding field analyser measurements show elevated ion temperatures in the scrape-off layer of L-mode plasmas and, in the presence of type-I ELMs, ions with energy greater than 500 eV are detected 20 cm outside the separatrix. Disruption mitigation by massive gas injection has reduced divertor heat loads by up to 70%.
|
|
| 28. |
|
|
| 29. |
- Litnovsky, A., et al.
(författare)
-
Diagnostic mirrors for ITER : A material choice and the impact of erosion and deposition on their performance
- 2007
-
Ingår i: Journal of Nuclear Materials. - : Elsevier BV. - 0022-3115 .- 1873-4820. ; 363, s. 1395-1402
-
Tidskriftsartikel (refereegranskat)abstract
- Metal mirrors will be implemented in about half of the ITER diagnostics. Mirrors in ITER will have to withstand radiation loads, erosion by charge-exchange neutrals, deposition of impurities, particle implantation and neutron irradiation. It is believed that the optical properties of diagnostic mirrors will be primarily influenced by erosion and deposition. A solution is needed for optimal performance of mirrors in ITER throughout the entire lifetime of the machine. A multi-machine research on diagnostic mirrors is currently underway in fusion facilities at several institutions and laboratories worldwide. Among others, dedicated investigations of ITER-candidate mirror materials are ongoing in Tore-Supra, TEXTOR, DIII-D, TCV, T-10 and JET. Laboratory studies are underway at IPP Kharkov (Ukraine), Kurchatov Institute (Russia) and the University of Basel (Switzerland). An overview of current research on diagnostic mirrors along with an outlook on future investigations is the subject of this paper.
|
|
| 30. |
- Calvert, Clara, et al.
(författare)
-
Changes in preterm birth and stillbirth during COVID-19 lockdowns in 26 countries
- 2023
-
Ingår i: Nature Human Behaviour. - : Springer Nature. - 2397-3374. ; 7:4, s. 529-544
-
Tidskriftsartikel (refereegranskat)abstract
- Preterm birth (PTB) is the leading cause of infant mortality worldwide. Changes in PTB rates, ranging from -90% to +30%, were reported in many countries following early COVID-19 pandemic response measures ('lockdowns'). It is unclear whether this variation reflects real differences in lockdown impacts, or perhaps differences in stillbirth rates and/or study designs. Here we present interrupted time series and meta-analyses using harmonized data from 52 million births in 26 countries, 18 of which had representative population-based data, with overall PTB rates ranging from 6% to 12% and stillbirth ranging from 2.5 to 10.5 per 1,000 births. We show small reductions in PTB in the first (odds ratio 0.96, 95% confidence interval 0.95-0.98, P value <0.0001), second (0.96, 0.92-0.99, 0.03) and third (0.97, 0.94-1.00, 0.09) months of lockdown, but not in the fourth month of lockdown (0.99, 0.96-1.01, 0.34), although there were some between-country differences after the first month. For high-income countries in this study, we did not observe an association between lockdown and stillbirths in the second (1.00, 0.88-1.14, 0.98), third (0.99, 0.88-1.12, 0.89) and fourth (1.01, 0.87-1.18, 0.86) months of lockdown, although we have imprecise estimates due to stillbirths being a relatively rare event. We did, however, find evidence of increased risk of stillbirth in the first month of lockdown in high-income countries (1.14, 1.02-1.29, 0.02) and, in Brazil, we found evidence for an association between lockdown and stillbirth in the second (1.09, 1.03-1.15, 0.002), third (1.10, 1.03-1.17, 0.003) and fourth (1.12, 1.05-1.19, <0.001) months of lockdown. With an estimated 14.8 million PTB annually worldwide, the modest reductions observed during early pandemic lockdowns translate into large numbers of PTB averted globally and warrant further research into causal pathways.
|
|
| 31. |
- KC, Ashish, 1982-, et al.
(författare)
-
Changes in preterm birth and stillbirth during COVID-19 lockdowns in 26 countries.
- 2023
-
Ingår i: Nature human behaviour. - : Springer Science and Business Media LLC. - 2397-3374. ; 7:4, s. 529-544
-
Tidskriftsartikel (refereegranskat)abstract
- Preterm birth (PTB) is the leading cause of infant mortality worldwide. Changes in PTB rates, ranging from -90% to +30%, were reported in many countries following early COVID-19 pandemic response measures ('lockdowns'). It is unclear whether this variation reflects real differences in lockdown impacts, or perhaps differences in stillbirth rates and/or study designs. Here we present interrupted time series and meta-analyses using harmonized data from 52 million births in 26 countries, 18 of which had representative population-based data, with overall PTB rates ranging from 6% to 12% and stillbirth ranging from 2.5 to 10.5 per 1,000 births. We show small reductions in PTB in the first (odds ratio 0.96, 95% confidence interval 0.95-0.98, P value <0.0001), second (0.96, 0.92-0.99, 0.03) and third (0.97, 0.94-1.00, 0.09) months of lockdown, but not in the fourth month of lockdown (0.99, 0.96-1.01, 0.34), although there were some between-country differences after the first month. For high-income countries in this study, we did not observe an association between lockdown and stillbirths in the second (1.00, 0.88-1.14, 0.98), third (0.99, 0.88-1.12, 0.89) and fourth (1.01, 0.87-1.18, 0.86) months of lockdown, although we have imprecise estimates due to stillbirths being a relatively rare event. We did, however, find evidence of increased risk of stillbirth in the first month of lockdown in high-income countries (1.14, 1.02-1.29, 0.02) and, in Brazil, we found evidence for an association between lockdown and stillbirth in the second (1.09, 1.03-1.15, 0.002), third (1.10, 1.03-1.17, 0.003) and fourth (1.12, 1.05-1.19, <0.001) months of lockdown. With an estimated 14.8 million PTB annually worldwide, the modest reductions observed during early pandemic lockdowns translate into large numbers of PTB averted globally and warrant further research into causal pathways.
|
|
| 32. |
|
|
| 33. |
- Smith, ER, et al.
(författare)
-
Adverse maternal, fetal, and newborn outcomes among pregnant women with SARS-CoV-2 infection: an individual participant data meta-analysis
- 2023
-
Ingår i: BMJ global health. - : BMJ. - 2059-7908. ; 8:1
-
Tidskriftsartikel (refereegranskat)abstract
- Despite a growing body of research on the risks of SARS-CoV-2 infection during pregnancy, there is continued controversy given heterogeneity in the quality and design of published studies.MethodsWe screened ongoing studies in our sequential, prospective meta-analysis. We pooled individual participant data to estimate the absolute and relative risk (RR) of adverse outcomes among pregnant women with SARS-CoV-2 infection, compared with confirmed negative pregnancies. We evaluated the risk of bias using a modified Newcastle-Ottawa Scale.ResultsWe screened 137 studies and included 12 studies in 12 countries involving 13 136 pregnant women.Pregnant women with SARS-CoV-2 infection—as compared with uninfected pregnant women—were at significantly increased risk of maternal mortality (10 studies; n=1490; RR 7.68, 95% CI 1.70 to 34.61); admission to intensive care unit (8 studies; n=6660; RR 3.81, 95% CI 2.03 to 7.17); receiving mechanical ventilation (7 studies; n=4887; RR 15.23, 95% CI 4.32 to 53.71); receiving any critical care (7 studies; n=4735; RR 5.48, 95% CI 2.57 to 11.72); and being diagnosed with pneumonia (6 studies; n=4573; RR 23.46, 95% CI 3.03 to 181.39) and thromboembolic disease (8 studies; n=5146; RR 5.50, 95% CI 1.12 to 27.12).Neonates born to women with SARS-CoV-2 infection were more likely to be admitted to a neonatal care unit after birth (7 studies; n=7637; RR 1.86, 95% CI 1.12 to 3.08); be born preterm (7 studies; n=6233; RR 1.71, 95% CI 1.28 to 2.29) or moderately preterm (7 studies; n=6071; RR 2.92, 95% CI 1.88 to 4.54); and to be born low birth weight (12 studies; n=11 930; RR 1.19, 95% CI 1.02 to 1.40). Infection was not linked to stillbirth. Studies were generally at low or moderate risk of bias.ConclusionsThis analysis indicates that SARS-CoV-2 infection at any time during pregnancy increases the risk of maternal death, severe maternal morbidities and neonatal morbidity, but not stillbirth or intrauterine growth restriction. As more data become available, we will update these findings per the published protocol.
|
|
| 34. |
|
|
| 35. |
|
|
| 36. |
- Widdowson, A., et al.
(författare)
-
Removal of beryllium-containing films deposited in JET from mirror surfaces by laser cleaning
- 2011
-
Ingår i: Journal of Nuclear Materials. - : Elsevier BV. - 0022-3115 .- 1873-4820. ; 415:1, s. S1199-S1202
-
Tidskriftsartikel (refereegranskat)abstract
- A set of stainless steel (SS) and molybdenum mirror samples located in the divertor and at the outer mid-plane of the vessel were exposed in JET from 2005 to 2007. A selection of these mirror samples with well adhered deposits (i.e. not flaking) of up to a few hundred nanometers in thickness and with Be/C ratios ranging from 0 to similar to 1 have been cleaned using a laser system developed at CEA, Saclay. Following laser cleaning the recovered reflectivity was generally better in the infrared than the visible spectrum, with recovery of up to 90% of the initial reflectivity being obtained at 1600 nm for both Mo and SS mirrors falling as low as 20-30% of initial reflectivity at a wavelength of 400 nm for some SS mirrors, rising to similar to 80% for Mo mirrors. Some deposit remained on the mirrors after the cleaning trials.
|
|
| 37. |
|
|
| 38. |
- Hakola, A., et al.
(författare)
-
Plasma-wall interaction studies in the full-W ASDEX upgrade during helium plasma discharges
- 2017
-
Ingår i: Nuclear Fusion. - : IOP PUBLISHING LTD. - 0029-5515 .- 1741-4326. ; 57:6
-
Tidskriftsartikel (refereegranskat)abstract
- Plasma-wall interactions have been studied in the full-W ASDEX Upgrade during its dedicated helium campaign. Relatively clean plasmas with a He content of > 80% could be obtained by applying ion cyclotron wall conditioning (ICWC) discharges upon changeover from D to He. However, co-deposited layers with significant amounts of He and D were measured on W samples exposed to ICWC plasmas at the low-field side (outer) midplane. This is a sign of local migration and accumulation of materials and residual fuel in regions shadowed from direct plasma exposure albeit globally D was removed from the vessel. When exposing W samples to ELMy H-mode helium plasmas in the outer strike-point region, no net erosion was observed but the surfaces had been covered with co-deposited layers mainly consisting of W, B, C, and D and being the thickest on rough and modified surfaces. This is different from the typical erosion-deposition patterns in D plasmas, where usually sharp net-erosion peaks surrounded by prominent net-deposition maxima for W are observed close to the strike point. Moreover, no clear signs of W nanostructure growth or destruction could be seen. The growth of deposited layers may impact the operation of future fusion reactors and is attributed to strong sources in the main chamber that under suitable conditions may switch the balance from net erosion into net deposition, even close to the strike points. In addition, the absence of noticeable chemical erosion in helium plasmas may have affected the thickness of the deposited layers. Retention of He, for its part, remained small and uniform throughout the strike-point region although our results indicate that samples with smooth surfaces can contain an order of magnitude less He than their rough counterparts.
|
|
| 39. |
- Le Roch, Sarah, et al.
(författare)
-
European survey on criteria of aesthetics for periodontal evaluation: The ESCAPE study
- 2019
-
Ingår i: Journal of Clinical Periodontology. - : Wiley. - 0303-6979 .- 1600-051X. ; 46:11, s. 1116-1123
-
Tidskriftsartikel (refereegranskat)abstract
- © 2019 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd Objective: The ESCAPE multicentre survey was designed to (a) compare the agreement of three relevant aesthetic scoring systems among different centres, and (b) evaluate the reproducibility of each question of the questionnaires. Materials and Methods: EFP centres (n=14) were involved in an e-survey. Forty-two participants (28 teachers, 14 postgraduate students) were asked to score the one-year aesthetic outcomes of photographs using the Before–After Scoring System (BASS), the Pink Esthetic Score (PES) and the Root coverage Esthetic Score (RES). Mean values of kappa statistics performed on each question were provided to resume global agreement of each method. Results: Between teachers, a difference of kappa≥0.41 (p=.01) was found for BASS (75%) and PES (57%). Similarly, RES (84%) and PES (57%) were different (p<.001). No difference was found between BASS (75%) and RES (84%). No difference was found between students, whatever the scoring system. Questions of each scoring system showed differences in their reproducibility. Conclusions: The outcomes of this study indicate that BASS and RES scoring systems are reproducible tools to evaluate aesthetic after root coverage therapies between different centres. Among the various variables, lack of scar, degree of root coverage, colour match and gingival margin that follows the CEJ show the best reliability.
|
|
| 40. |
- Litnovsky, A., et al.
(författare)
-
Dust investigations in TEXTOR : Impact of dust on plasma-wall interactions and on plasma performance
- 2013
-
Ingår i: Journal of Nuclear Materials. - : Elsevier BV. - 0022-3115 .- 1873-4820. ; 438:Suppl., s. S126-S132
-
Tidskriftsartikel (refereegranskat)abstract
- Dust will have severe impact on ITER performance since the accumulation of tritium in dust represents a safety issue, a possible reaction of dust with air and steam imposes an explosion hazard and the penetration of dust in core plasmas may degrade plasma performance by increasing radiative losses. Investigations were performed in TEXTOR where known amounts of pre-characterized carbon, diamond and tungsten dust were mobilized into plasmas using special dust holders. Mobilization of dust changed a balance between plasma-surface interactions processes, significantly increasing net deposition. Immediately after launch dust was dominating both core and edge plasma parameters. Remarkably, in about 100 ms after the launch, the effect of dust on edge and core plasma parameters was vanished: no increase of carbon and tungsten concentrations in the core plasmas was detected suggesting a prompt transport of dust to the nearby plasma-facing components without further residence in the plasma.
|
|
| 41. |
|
|
| 42. |
- Rubel, Marek, et al.
(författare)
-
Comprehensive First Mirror Test for ITER at JET with Carbon Walls
- 2010
-
Ingår i: Proceedings of the23rd IAEA Fusion Energy Conference.
-
Konferensbidrag (refereegranskat)abstract
- Metallic mirrors will be essential components of all optical spectroscopy and imaging systems forplasma diagnosis that will be used on the next-step magnetic fusion experiment, ITER. Any change of the mirrorperformance, in particular reflectivity, will influence the quality and reliability of detected signals. On therequest of the ITER Design Team, a First Mirror Test (FMT) has been carried out at JET during campaigns in2005-2007 and 2008-2009. To date, it has been the most comprehensive test performed with a large number oftest mirrors exposed in an environment containing both carbon and beryllium; the total plasma time (in 2005-2007 period) over 35 h including 27 h of X-point operation. 32 stainless steel and polycrystalline molybdenumflat-front and 45oangled mirrors were installed in separate channels of cassettes on the outer wall and in the MkII HD divertor: inner leg, outer leg and base plate under the load bearing tile. Post exposure studies comprisedreflectivity measurements and surface analyses with microscopy, secondary ion mass spectrometry, ion beamanalysis and energy dispersive X-ray spectroscopy.. The essential results are: (i) on the outer wall highreflectivity (~90%) is maintained for mirrors close to the channel entrance but it is degraded by 30-40 % deeperin the channel (ii) reflectivity loss by 70-90% is measured for mirrors placed in the divertor: outer, inner andbase; (iii) deuterium and carbon are the main elements detected on all mirror surfaces and the presence ofberyllium is also found; (iv) thick deposits show rough columnar structure and thickness is 1-20 μm; (v) bubblelike structures are detected in deposits; (vi) the deposition in channels in the divertor cassettes is pronounced atthe very entrance; (vii) photonic cleaning with laser removes deposits but the surface is damaged by laser pulses.In summary, reflectivity of all tested mirrors is degraded either by erosion with CX neutrals or by the formationof thick deposits. The implications of results obtained for first mirrors in next-step device are discussed andcritical assessment of various methods for in-situ cleaning of mirrors is presented. The conclusion is thatengineering solutions should be developed in order to install shutters or to implement a cassette with mirrors toreplace periodically the degraded ones
|
|
| 43. |
- von Hellermann, M, et al.
(författare)
-
Pilot experiments for the International Thermonuclear Experimental Reactor active beam spectroscopy diagnostic
- 2004
-
Ingår i: Review of Scientific Instruments. - : AIP Publishing. - 0034-6748 .- 1089-7623. ; 75:10, s. 3458-3461
-
Tidskriftsartikel (refereegranskat)abstract
- Supporting pilot experiments and activities which are currently considered or already performed for the development of the International Thermonuclear Experiment Reactor active beam spectroscopy diagnostic are addressed in this article. Four key issues are presented including optimization of spectral instrumentation, feasibility of a motional Stark effect (MSE) evaluation based on line ratios, "first-mirror" test-bed experiments at the tokamak TEXTOR, and finally the role of integrated data analysis for the conceptual layout of the change exchange recombination spectroscopy and MSE diagnostic.
|
|
| 44. |
- Litnovsky, A., et al.
(författare)
-
Optimization of tungsten castellated structures for the ITER divertor
- 2015
-
Ingår i: Journal of Nuclear Materials. - : Elsevier BV. - 0022-3115 .- 1873-4820. ; 463, s. 174-179
-
Tidskriftsartikel (refereegranskat)abstract
- In ITER, the plasma-facing components (PFCs) of the first wall and the divertor armor will be castellated to improve their thermo-mechanical stability and to limit forces due to induced currents. The fuel accumulation in the gaps may significantly contribute to the in-vessel fuel inventory. Castellation shaping may be the most straightforward way to minimize the fuel inventory and to alleviate the thermal loads onto castellations. A new castellation shape was proposed and comparative modeling of conventional (rectangular) and shaped castellation was performed for ITER conditions. Shaped castellation was predicted to be capable to operate under stationary heat load of 20 MW/m(2). An 11-fold decrease of beryllium (Be) content in the gaps of the shaped cells alone with a 7-fold decrease of carbon content was predicted. In order to validate the predictive capabilities of modeling tools used for ITER conditions, the dedicated modeling with the same codes was made for existing tokamaks and benchmarked with the results of multi-machine experiments. For the castellations exposed in TEXTOR and DIII-D, the carbon amount in the gaps of shaped cells was 1.9-2.3 times smaller than that of rectangular ones. Modeling for TEXTOR conditions yielded to 1.5-fold decrease of carbon content in the gaps of shaped castellation outlining fair agreement with the experiment. At the same time, a number of processes, like enhanced erosion of molten layer yet need to be implemented in the codes in order to increase the accuracy of predictions for ITER.
|
|
| 45. |
- Marot, Laurent, et al.
(författare)
-
Performances of Rh and Mo mirrors under JET exposure
- 2013
-
Ingår i: Journal of Nuclear Materials. - : Elsevier BV. - 0022-3115 .- 1873-4820. ; 438, s. S1187-S1191
-
Tidskriftsartikel (refereegranskat)abstract
- The aim of this work was to provide a comprehensive surface characterization of rhodium and molybdenum mirrors exposed on the main chamber wall of JET during campaigns with carbon plasma-facing components. As determined using X-ray photoelectron spectroscopy, Secondary Ion Mass Spectrometry, Scanning Electron Microscopy and optical measurements the co-deposits formed on the mirrors were composed of C, Be, Ni, Mo and Fe. Most of the metallic elements on the surface were in the oxidized states. After removing a part of the film by sputtering with Ar+ ions, Mo carbide state was studied by XPS. The reflectivity measurements showed the dependence of the thickness of the deposited film on the optical properties of the mirror: a thinner film on the Mo mirrors results in an identical reduction in reflectivity as that seen on the exposed Rh mirror.
|
|
| 46. |
- Merheb, J., et al.
(författare)
-
Influence of Skeletal and Local Bone Density on Dental Implant Stability in Patients with Osteoporosis
- 2016
-
Ingår i: Clinical Implant Dentistry and Related Research. - : Wiley. - 1523-0899 .- 1708-8208. ; 18:2, s. 253-260
-
Tidskriftsartikel (refereegranskat)abstract
- Background and PurposeOsteoporosis is a major skeletal disease affecting millions of people worldwide. Recent studies claim that patients with osteoporosis do not have a higher risk of early implant failure compared to non-osteoporotic patients. The aim of this study was to assess the effect of skeletal osteoporosis and local bone density on initial dental implant stability. Materials and MethodsSeventy-three patients were recruited and were assigned (based on a Dual-energy X-ray Absorptiometry scan) to either the osteoporosis (Opr), osteopenia (Opn), or control (C) group. Forty nine of the 73 patients received dental implants and had implant stability measured by means of resonance frequency analysis (RFA) at implant placement and at prosthetic abutment placement. On the computerized tomography scans, the cortical thickness and the bone density (Hounsfield Units) at the sites of implant placement were measured. ResultsAt implant placement, primary stability was on average lower in group Opr (63.310.3 ISQ) than in group Opn (65.3 +/- 7.5 implant stability qutient (ISQ)), and group C (66.7 +/- 8.7 ISQ). At abutment placement, a similar trend was observed: group Opr (66.4 +/- 9.5 ISQ) scored lower than group Opn (70.7 +/- 7.8 ISQ), while the highest average was for group C (72.2 +/- 7.2 ISQ). The difference between groups Opr and C was significant. Implant length and diameter did not have a significant effect on implant stability as measured with RFA. A significant correlation was found between local bone density and implant stability for all regions of interest. ConclusionsImplant stability seems to be influenced by both local and skeletal bone densities. The lower stability scores in patient with skeletal osteoporosis reinforce the recommendations that safe protocols and longer healing times could be recommended when treating those patients with dental implants.
|
|
| 47. |
- Merheb, J., et al.
(författare)
-
Relation between Spongy Bone Density in the Maxilla and Skeletal Bone Density
- 2015
-
Ingår i: Clinical Implant Dentistry and Related Research. - : Wiley. - 1523-0899 .- 1708-8208. ; 17:6, s. 1180-1187
-
Tidskriftsartikel (refereegranskat)abstract
- © 2015 Wiley Periodicals, Inc. Background and Purpose: Osteoporosis is a disease affecting more than 300 million people worldwide and is responsible for numerous medical complications. This study aimed to investigate the relation between skeletal and maxillary bone density. Materials and Methods: Seventy-three patients were recruited and divided between group A (osteoporosis), group B (healthy, control), and group C (osteopenia) on the basis of a dual-energy x-ray absorptiomery (DXA) scan. These patients also received a CT scan on which bone density measurements were performed at five sites: maxilla midline, retromolar tuberosities, incisor, premolars, and molar regions. Results: The bone density was lower in osteoporotic patients compared with the control patients. The bone mineral density (BMD) of the tuberosities showed the strongest correlations with the BMD of the hip and the spine (respectively, r=0.50 and r=0.61). The midline region showed moderate correlations with the hip (r=0.47) and the spine (r=0.46). For potential implant sites, the correlations with the BMD of the hip and spine were, however, small to insignificant. Based on measurements of bone density of the maxilla, it was possible to predict if the patient was osteoporotic or not with a sensitivity of 65% and a specificity of 83%. Conclusions: The maxillary bone density of subjects with osteoporosis is significantly lower than that of healthy patients. Moreover, there is a direct correlation between the density of the skeleton and the density of some sites of the maxilla. Using measurements of maxillary bone density in order to predict skeletal bone density might be a useful tool for the screening of osteoporosis.
|
|
| 48. |
- Rubel, Marek, et al.
(författare)
-
First mirror erosion-deposition studies in JET using an ITER-like mirror test assembly
- 2021
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 0029-5515 .- 1741-4326. ; 61:4
-
Tidskriftsartikel (refereegranskat)abstract
- Mirror tests for ITER have been carried out in JET for over 15 years. During the third JET campaign with the ITER-like wall (2015-2016), comprising a total tokamak plasma exposure duration of 23.4 h and 1027 h of glow discharge cleaning, a new experiment was performed with a specially designed ITER-like test assembly housing six polycrystalline molybdenum mirror samples and featuring trapezoidal entrance apertures simulating the geometry of cut-outs in the diagnostic first wall of the ITER shielding blanket. The assembly was installed on the vacuum vessel wall at the outer midplane, set back radially behind the JET poloidal outer limiters such that the contact with thermal plasma should be largely avoided. The total and diffuse reflectivity of all mirrors was measured in the range 300-2500 nm before and after exposure. Post-exposure studies of mirror surface composition and of surfaces outside and inside the assembly were performed using microscopy, x-ray spectroscopy and ion beam analysis methods. The main results are: (i) no measured degradation of total reflectivity; (ii) diffuse reflectivity increased especially at short wavelengths (below 500 nm) from 1.1 to 2.7% and from 0.8%-1.3% above 1000 nm; (iii) mirrors were coated with a thin co-deposited layer (similar to 20-30 nm) containing carbon, oxygen and traces of nitrogen, beryllium and metals (Ni, Cr, Fe); (iv) no deuterium was detected; (v) surface composition of the mirror box inner walls was similar to that of the mirrors; (vi) less than or similar to 100 nm thick beryllium was the main component on external surfaces of the assembly. These results provide new input to ITER both for the modelling of FM erosion/deposition and for the consideration of requirements for mirror cleaning methods.
|
|
| 49. |
- Rubel, Marek, et al.
(författare)
-
First Mirrors Test in JET for ITER : An overview of optical performance and surface morphology
- 2010
-
Ingår i: Nuclear Instruments and Methods in Physics Research Section A. - : Elsevier. - 0168-9002 .- 1872-9576. ; 623:2, s. 818-822
-
Tidskriftsartikel (refereegranskat)abstract
- Metallic mirrors will be essential components of all optical systems for plasma diagnosis in ITER. A comprehensive First Mirror Test (FMT) has been carried out in the JET tokamak. The exposure was followed by a characterisation of mirrors and their carriers. The main results obtained by optical and surface analysis methods are: (i) reflectivity of all tested mirrors is degraded either by erosion with charge exchange neutrals or by the formation of thick deposits; (ii) deuterium and carbon are the main elements detected on all mirror surfaces and the presence of beryllium is also found in several cases; (iii) thick deposits show columnar structure; (iv) bubble-like structures are detected in deposits; their formation is a probable reason for deposits' disintegration and peeling-off; (v) the deposition in channels in the divertor cassettes is pronounced at the very entrance and then it sharply decreases with the distance from the plasma, lambda similar to 5-7 mm.
|
|
| 50. |
|
|
