1. |
- Tudisco, E., et al.
(författare)
-
An extension of digital volume correlation for multimodality image registration
- 2017
-
Ingår i: Measurement Science & Technology. - : IOP Publishing. - 0957-0233 .- 1361-6501. ; 28:9
-
Tidskriftsartikel (refereegranskat)abstract
- The question of registering two images (or image volumes) acquired with different modalities, and thus exhibiting different contrast, at different positions is addressed based on an extension of global digital image (or volume) correlation. A specific comparison metric is introduced allowing the signature of the different phases to be related. A first solution consists of a Gaussian mixture to describe the joint distribution of gray levels, which not only provides a matching of both images, but also offers a natural segmentation indicator. A second 'self-adapting' solution does not include any postulated a priori model for the joint histogram and leads to a registration of the images based on their initial histograms. The algorithm is implemented with a pyramidal multiscale framework for the sake of robustness. The proposed multiscale technique is tested on two 3D images obtained from x-ray and neutron tomography respectively. The proposed approach brings the two images to coincidence with a sub-pixel accuracy and allows for a 'natural' segmentation of the different phases.
|
|
2. |
- Combe, G., et al.
(författare)
-
Experimental evidence of granulence
- 2013
-
Ingår i: AIP Conference Proceedings. - : AIP. - 0094-243X. ; 1542, s. 453-456
-
Konferensbidrag (refereegranskat)abstract
- We present an experimental study of velocity fluctuations in quasistatic flow of a 2D granular material deformed in a shear apparatus named 1γ2ε [1]. Radjaï and Roux [2] revealed systematic similarities between velocity fluctuations observed in discrete element simulations of quasistatic flow of granular material and turbulent flows in fluids. The character of these velocity fluctuations - named granulence by [2] - manifests as a non-Gaussian broadening of the probability density function of the fluctuations as the length of the analyzed shear-window is decreased, and exhibits some space and time scaling. The experiments presented are simple shear tests on granular samples composed of about 2000 wooden rods. The kinematics of the rod centers was followed by means of 2D Particle Image Tracking (PIT) technique applied to a sequence of 24 Mpixels digital pictures acquired throughout the duration of the loading at a frequency of 0.08 image/s. This analysis confirms the existence of granulence features in a real experimental test, which is comparable to that previously observed in numerical simulations of [2]. The experimental results obtained open up a new avenue for further studies on fluctuations in granular materials.
|
|
3. |
- Etxegarai, Maddi, et al.
(författare)
-
Characterisation of single-phase fluid-flow heterogeneity due to localised deformation in a porous rock using rapid neutron tomography
- 2021
-
Ingår i: Journal of Imaging. - : MDPI AG. - 2313-433X. ; 7:12
-
Tidskriftsartikel (refereegranskat)abstract
- The behaviour of subsurface-reservoir porous rocks is a central topic in the resource engineering industry and has relevant applications in hydrocarbon, water production, and CO2 sequestration. One of the key open issues is the effect of deformation on the hydraulic properties of the host rock and, specifically, in saturated environments. This paper presents a novel full-field data set describing the hydro-mechanical properties of porous geomaterials through in situ neutron and X-ray tomography. The use of high-performance neutron imaging facilities such as CONRAD-2 (Helmholtz-Zentrum Berlin) allows the tracking of the fluid front in saturated samples, making use of the differential neutron contrast between “normal” water and heavy water. To quantify the local hydro-mechanical coupling, we applied a number of existing image analysis algorithms and developed an array of bespoke methods to track the water front and calculate the 3D speed maps. The experimental campaign performed revealed that the pressure-driven flow speed decreases, in saturated samples, in the presence of pre-existing low porosity heterogeneities and compactant shear-bands. Furthermore, the observed complex mechanical behaviour of the samples and the associated fluid flow highlight the necessity for 3D imaging and analysis.
|
|
4. |
- Lewis, Helen, et al.
(författare)
-
Interactions Between Imbibition and Pressure-Driven Flow in a Microporous Deformed Limestone
- 2023
-
Ingår i: Transport in Porous Media. - : Springer Science and Business Media LLC. - 0169-3913 .- 1573-1634. ; 146:3, s. 559-585
-
Tidskriftsartikel (refereegranskat)abstract
- Neutron imaging is used for direct observation of evolving water–air and deuterated water–normal water exchanges in flow experiments performed on a laboratory-deformed, microporous laminated limestone, an extremely fine-textured rock altered by arrays of superposed fractures generated in a rock mechanics apparatus. The neutron images document significant, evolving, water speed and flow direction variability at the deci-micron scale and spatially complex patterns of both increasing and decreasing water saturation. We infer that capillarity-driven and pressure-driven water movement occurs concurrently, in close proximity and in competition, and that as local and global water saturations evolve these two drivers can change their dominance in both matrix and deformed elements. Thin sections are used to obtain sub-micron resolution SEM images that provide multi-scale information on the textural features’ spatial arrangements. The textural characteristics are consistent with the inferences made from the coarser flow imaging. Alternating lamina types provide the primary lithological heterogeneity, while the experimentally created deformations lead to quasi-planar zones of highly comminuted matrix and fracture-like voids, each with lengths ranging from sub-mm to cm. Together deformation features delineate a partially connected array. The interplay between fluid movement through deformation features, and flow into (and out of) the laminae, implies near-equivalence of local driving pressure- and capillary-related energies, with subtle shifts in this balance as water saturation increases. The insights gained invite a re-examination of common rules-of-thumb for multi-phase fluid flow often adopted in fractured, low-permeability microporous rocks.
|
|
5. |
- Martell, J., et al.
(författare)
-
Combined Neutron and X-Ray Tomography-A Versatile and Non-Destructive Tool in Planetary Geosciences
- 2024
-
Ingår i: Journal of Geophysical Research - Planets. - : American Geophysical Union (AGU). - 2169-9097 .- 2169-9100. ; 129:2
-
Forskningsöversikt (refereegranskat)abstract
- With several upcoming sample return missions, such as the Mars Sample Return Campaign, non-destructive methods will be key to maximizing their scientific output. In this study, we demonstrate that the combination of neutron and X-ray tomography provides an important tool for the characterization of such valuable samples. These methods allow quantitative analyses of internal sample features and also provide a guide for further destructive analyses with little to no sample treatment, which maintains sample integrity, including minimizing the risk of potential contamination. Here, we present and review the results from four case studies of terrestrial impactites and meteorites along with their analytical setup. Using combined X-ray and neutron tomography, a Ni-Fe silicide spherule, that is, projectile material, was located within a Libyan Desert Glass sample and the distribution of hydrous phases was pinpointed in selected impactite samples from the Chicxulub IODP-ICDP Expedition 364 drill core and the Luizi impact structure, as well as in the Miller Range 03346 Martian meteorite. Neutron and X-ray tomography give complementary three-dimensional information about the distribution of different phases within a geologic sample. We demonstrate that these two methods can be successfully used to locate meteoritic material (i.e., from the impacting object) and hydrous components in terrestrial impactites and meteorites. This can help shed light on aqueous processes in the Solar System as well as the impact cratering process. Non-destructive methods like these will be important for up-coming sample return missions to characterize the returned samples and guide further destructive analyses. Combined neutron and X-ray imaging was used to locate projectile material and hydrous phases in meteorites and terrestrial impactites Locating and identifying projectile material can shed light on the impact cratering process Combined neutron/X-ray tomography can serve as a fundamental method for the characterization of material from (future) sample return missions
|
|
6. |
|
|
7. |
- Tudisco, Erika, et al.
(författare)
-
Fast 4‐D Imaging of Fluid Flow in Rock by High‐Speed Neutron Tomography
- 2019
-
Ingår i: Journal of Geophysical Research: Solid Earth. - 2169-9313. ; 124:4, s. 3557-3569
-
Tidskriftsartikel (refereegranskat)abstract
- High‐speed neutron tomographies (1‐min acquisition) have been acquired during water invasion into air‐filled samples of both intact and deformed (ex situ) Vosges sandstone. Three‐dimensional volume images have been processed to detect and track the evolution of the waterfront and to calculate full‐field measurement of its speed of advance. The flow process correlates well with known rock properties and is especially sensitive to the distribution of the altered properties associated with observed localized deformation, which is independently characterized by Digital Volume Correlation of X‐ray tomographies acquired before and after the mechanical test. The successful results presented herein open the possibility of in situ analysis of the local evolution of hydraulic properties of rocks due to mechanical deformation.
|
|
8. |
- Törnquist, Elin, et al.
(författare)
-
Dual modality neutron and x-ray tomography for enhanced image analysis of the bone-metal interface
- 2021
-
Ingår i: Physics in Medicine and Biology. - : IOP Publishing. - 0031-9155 .- 1361-6560. ; 66:13
-
Tidskriftsartikel (refereegranskat)abstract
- The bone tissue formed at the contact interface with metallic implants, particularly its 3D microstructure, plays a pivotal role for the structural integrity of implant fixation. X-ray tomography is the classical imaging technique used for accessing microstructural information from bone tissue. However, neutron tomography has shown promise for visualising the immediate bone-metal implant interface, something which is highly challenging with x-rays due to large differences in attenuation between metal and biological tissue causing image artefacts. To highlight and explore the complementary nature of neutron and x-ray tomography, proximal rat tibiae with titanium-based implants were imaged with both modalities. The two techniques were compared in terms of visualisation of different material phases and by comparing the properties of the individual images, such as the contrast-to-noise ratio. After superimposing the images using a dedicated image registration algorithm, the complementarity was further investigated via analysis of the dual modality histogram, joining the neutron and x-ray data. From these joint histograms, peaks with well-defined grey value intervals corresponding to the different material phases observed in the specimens were identified and compared. The results highlight differences in how neutrons and x-rays interact with biological tissues and metallic implants, as well as the benefits of combining both modalities. Future refinement of the joint histogram analysis could improve the segmentation of structures and tissues, and yield novel information about specimen-specific properties such as moisture content.
|
|
9. |
- Törnquist, Elin, et al.
(författare)
-
The Hydration State of Bone Tissue Affects Contrast in Neutron Tomographic Images
- 2022
-
Ingår i: Frontiers in Bioengineering and Biotechnology. - : Frontiers Media SA. - 2296-4185. ; 10
-
Tidskriftsartikel (refereegranskat)abstract
- Neutron tomography has emerged as a promising imaging technique for specific applications in bone research. Neutrons have a strong interaction with hydrogen, which is abundant in biological tissues, and they can penetrate through dense materials such as metallic implants. However, in addition to long imaging times, two factors have led to challenges in running in situ mechanical characterization experiments on bone tissue using neutron tomography: 1) the high water content in specimens reduces the visibility of internal trabecular structures; 2) the mechanical properties of bone are dependent on the hydration state of the tissue, with drying being reported to cause increased stiffness and brittleness. This study investigates the possibility of improving image quality in terms of neutron transmission and contrast between material phases by drying and rehydrating in heavy water. Rat tibiae and trabecular bovine bone plugs were imaged with neutron tomography at different hydration states and mechanical testing of the bone plugs was carried out to assess effects of drying and rehydration on the mechanical properties of bone. From analysis of image histograms, it was found that drying reduced the contrast between bone and soft tissue, but the contrast was restored with rehydration. Contrast-to-noise ratios and line profiles revealed that the contrast between bone tissue and background was reduced with increasing rehydration duration but remained sufficient for identifying internal structures as long as no free liquid was present inside the specimen. The mechanical analysis indicated that the proposed fluid exchange protocol had no adverse effects on the mechanical properties.
|
|