| 1. |
- Chavan, Swapnil, et al.
(författare)
-
Towards Global QSAR Model Building for Acute Toxicity : Munro Database Case Study
- 2014
-
Ingår i: International Journal of Molecular Sciences. - : MDPI AG. - 1661-6596 .- 1422-0067. ; 15:10, s. 18162-18174
-
Tidskriftsartikel (refereegranskat)abstract
- A series of 436 Munro database chemicals were studied with respect to their corresponding experimental LD50 values to investigate the possibility of establishing a global QSAR model for acute toxicity. Dragon molecular descriptors were used for the QSAR model development and genetic algorithms were used to select descriptors better correlated with toxicity data. Toxic values were discretized in a qualitative class on the basis of the Globally Harmonized Scheme: the 436 chemicals were divided into 3 classes based on their experimental LD50 values: highly toxic, intermediate toxic and low to non-toxic. The k-nearest neighbor (k-NN) classification method was calibrated on 25 molecular descriptors and gave a non-error rate (NER) equal to 0.66 and 0.57 for internal and external prediction sets, respectively. Even if the classification performances are not optimal, the subsequent analysis of the selected descriptors and their relationship with toxicity levels constitute a step towards the development of a global QSAR model for acute toxicity.
|
|
| 2. |
- Mansouri, Kamel, et al.
(författare)
-
Assessing bioaccumulation of polybrominated diphenyl ethers for aquatic species by QSAR modeling
- 2012
-
Ingår i: Chemosphere. - : Elsevier BV. - 0045-6535 .- 1879-1298. ; 89:4, s. 433-444
-
Tidskriftsartikel (refereegranskat)abstract
- Polybrominated diphenyl ethers (PBDEs) are used as flame retardants in textiles, foams and plastics. Highly bioaccumulative with toxic effects including developmental neurotoxicity estrogen and thyroid hormones disruption, they are considered as persistent organic pollutants (POPs) and have been found in human tissues, wildlife and biota worldwide. But only some of them are banned from EU market.For the environmental fate studies of these compounds the bioconcentration factor (BCF) is one of the most important endpoints to start with. We applied quantitative structure–activity relationships techniques to overcome the limited experimental data and avoid more animal testing.The aim of this work was to assess the bioaccumulation of PBDEs by means of QSAR. First, a BCF dataset of specifically conducted experiments was modeled. Then the study was extended by predicting the bioaccumulation and biomagnification factors using some experimental values from the literature. Molecular descriptors were calculated using DRAGON 6. The most relevant ones were selected and resulting models were compared paying attention to the applicability domain.
|
|
| 3. |
- Mansouri, Kamel, et al.
(författare)
-
CERAPP : Collaborative Estrogen Receptor Activity Prediction Project
- 2016
-
Ingår i: Journal of Environmental Health Perspectives. - : Environmental Health Perspectives. - 0091-6765 .- 1552-9924. ; 124:7, s. 1023-1033
-
Tidskriftsartikel (refereegranskat)abstract
- BACKGROUND: Humans are exposed to thousands of man-made chemicals in the environment. Some chemicals mimic natural endocrine hormones and, thus, have the potential to be endocrine disruptors. Most of these chemicals have never been tested for their ability to interact with the estrogen receptor (ER). Risk assessors need tools to prioritize chemicals for evaluation in costly in vivo tests, for instance, within the U.S. EPA Endocrine Disruptor Screening Program. OBJECTIVES: We describe a large-scale modeling project called CERAPP (Collaborative Estrogen Receptor Activity Prediction Project) and demonstrate the efficacy of using predictive computational models trained on high-throughput screening data to evaluate thousands of chemicals for ER-related activity and prioritize them for further testing. METHODS: CERAPP combined multiple models developed in collaboration with 17 groups in the United States and Europe to predict ER activity of a common set of 32,464 chemical structures. Quantitative structure-activity relationship models and docking approaches were employed, mostly using a common training set of 1,677 chemical structures provided by the U.S. EPA, to build a total of 40 categorical and 8 continuous models for binding, agonist, and antagonist ER activity. All predictions were evaluated on a set of 7,522 chemicals curated from the literature. To overcome the limitations of single models, a consensus was built by weighting models on scores based on their evaluated accuracies. RESULTS: Individual model scores ranged from 0.69 to 0.85, showing high prediction reliabilities. Out of the 32,464 chemicals, the consensus model predicted 4,001 chemicals (12.3%) as high priority actives and 6,742 potential actives (20.8%) to be considered for further testing.CONCLUSION: This project demonstrated the possibility to screen large libraries of chemicals using a consensus of different in silico approaches. This concept will be applied in future projects related to other end points.
|
|
| 4. |
- Mansouri, Kamel, et al.
(författare)
-
CoMPARA : Collaborative Modeling Project for Androgen Receptor Activity
- 2020
-
Ingår i: Journal of Environmental Health Perspectives. - 0091-6765 .- 1552-9924. ; 128:2, s. 1-17
-
Tidskriftsartikel (refereegranskat)abstract
- BACKGROUND: Endocrine disrupting chemicals (EDCs) are xenobiotics that mimic the interaction of natural hormones and alter synthesis, transport, or metabolic pathways. The prospect of EDCs causing adverse health effects in humans and wildlife has led to the development of scientific and regulatory approaches for evaluating bioactivity. This need is being addressed using high-throughput screening (HTS) in vitro approaches and computational modeling.OBJECTIVES: In support of the Endocrine Disruptor Screening Program, the U.S. Environmental Protection Agency (EPA) led two worldwide consortiums to virtually screen chemicals for their potential estrogenic and androgenic activities. Here, we describe the Collaborative Modeling Project for Androgen Receptor Activity (CoMPARA) efforts, which follows the steps of the Collaborative Estrogen Receptor Activity Prediction Project (CERAPP).METHODS: The CoMPARA list of screened chemicals built on CERAPP's list of 32,464 chemicals to include additional chemicals of interest, as well as simulated ToxCast (TM) metabolites, totaling 55,450 chemical structures. Computational toxicology scientists from 25 international groups contributed 91 predictive models for binding, agonist, and antagonist activity predictions. Models were underpinned by a common training set of 1,746 chemicals compiled from a combined data set of 11 ToxCast (TM)/Tox21 HTS in vitro assays.RESULTS: The resulting models were evaluated using curated literature data extracted from different sources. To overcome the limitations of single-model approaches, CoMPARA predictions were combined into consensus models that provided averaged predictive accuracy of approximately 80% for the evaluation set.DISCUSSION: The strengths and limitations of the consensus predictions were discussed with example chemicals; then, the models were implemented into the free and open-source OPERA application to enable screening of new chemicals with a defined applicability domain and accuracy assessment. This implementation was used to screen the entire EPA DSSTox database of similar to 875,000 chemicals, and their predicted AR activities have been made available on the EPA CompTox Chemicals dashboard and National Toxicology Program's Integrated Chemical Environment.
|
|
| 5. |
- Sushko, Iurii, et al.
(författare)
-
Applicability Domains for Classification Problems : Benchmarking of Distance to Models for Ames Mutagenicity Set.
- 2010
-
Ingår i: Journal of chemical information and modeling. - : American Chemical Society (ACS). - 1549-9596 .- 1549-960X. ; 50:12, s. 2094-2111
-
Tidskriftsartikel (refereegranskat)abstract
- The estimation of accuracy and applicability of QSAR and QSPR models for biological and physicochemical properties represents a critical problem. The developed parameter of "distance to model" (DM) is defined as a metric of similarity between the training and test set compounds that have been subjected to QSAR/QSPR modeling. In our previous work, we demonstrated the utility and optimal performance of DM metrics that have been based on the standard deviation within an ensemble of QSAR models. The current study applies such analysis to 30 QSAR models for the Ames mutagenicity data set that were previously reported within the 2009 QSAR challenge. We demonstrate that the DMs based on an ensemble (consensus) model provide systematically better performance than other DMs. The presented approach identifies 30-60% of compounds having an accuracy of prediction similar to the interlaboratory accuracy of the Ames test, which is estimated to be 90%. Thus, the in silico predictions can be used to halve the cost of experimental measurements by providing a similar prediction accuracy. The developed model has been made publicly available at http://ochem.eu/models/1 .
|
|
| 6. |
- Tetko, Igor V, et al.
(författare)
-
Critical assessment of QSAR models of environmental toxicity against Tetrahymena pyriformis : focusing on applicability domain and overfitting by variable selection.
- 2008
-
Ingår i: Journal of chemical information and modeling. - : American Chemical Society. - 1549-9596 .- 1549-960X. ; 48:9, s. 1733-46
-
Tidskriftsartikel (refereegranskat)abstract
- The estimation of the accuracy of predictions is a critical problem in QSAR modeling. The "distance to model" can be defined as a metric that defines the similarity between the training set molecules and the test set compound for the given property in the context of a specific model. It could be expressed in many different ways, e.g., using Tanimoto coefficient, leverage, correlation in space of models, etc. In this paper we have used mixtures of Gaussian distributions as well as statistical tests to evaluate six types of distances to models with respect to their ability to discriminate compounds with small and large prediction errors. The analysis was performed for twelve QSAR models of aqueous toxicity against T. pyriformis obtained with different machine-learning methods and various types of descriptors. The distances to model based on standard deviation of predicted toxicity calculated from the ensemble of models afforded the best results. This distance also successfully discriminated molecules with low and large prediction errors for a mechanism-based model developed using log P and the Maximum Acceptor Superdelocalizability descriptors. Thus, the distance to model metric could also be used to augment mechanistic QSAR models by estimating their prediction errors. Moreover, the accuracy of prediction is mainly determined by the training set data distribution in the chemistry and activity spaces but not by QSAR approaches used to develop the models. We have shown that incorrect validation of a model may result in the wrong estimation of its performance and suggested how this problem could be circumvented. The toxicity of 3182 and 48774 molecules from the EPA High Production Volume (HPV) Challenge Program and EINECS (European chemical Substances Information System), respectively, was predicted, and the accuracy of prediction was estimated. The developed models are available online at http://www.qspr.org site.
|
|
| 7. |
|
|
