| 1. |
- Valijam, Shayan, et al.
(författare)
-
A lab-on-a-chip utilizing microwaves for bacterial spore disruption and detection
- 2023
-
Ingår i: Biosensors & bioelectronics. - : Elsevier. - 0956-5663 .- 1873-4235. ; 231
-
Tidskriftsartikel (refereegranskat)abstract
- Bacterial spores are problematic in agriculture, the food industry, and healthcare, with the fallout costs from spore-related contamination being very high. Spores are difficult to detect since they are resistant to many of the bacterial disruption techniques used to bring out the biomarkers necessary for detection. Because of this, effective and practical spore disruption methods are desirable. In this study, we demonstrate the efficiency of a compact microfluidic lab-on-chip built around a coplanar waveguide (CPW) operating at 2.45 GHz. We show that the CPW generates an electric field hotspot of ∼10 kV/m, comparable to that of a commercial microwave oven, while using only 1.2 W of input power and thus resulting in negligible sample heating. Spores passing through the microfluidic channel are disrupted by the electric field and release calcium dipicolic acid (CaDPA), a biomarker molecule present alongside DNA in the spore core. We show that it is possible to detect this disruption in a bulk spore suspension using fluorescence spectroscopy. We then use laser tweezers Raman spectroscopy (LTRS) to show the loss of CaDPA on an individual spore level and that the loss increases with irradiation power. Only 22% of the spores contain CaDPA after exposure to 1.2 W input power, compared to 71% of the untreated control spores. Additionally, spores exposed to microwaves appear visibly disrupted when imaged using scanning electron microscopy (SEM). Overall, this study shows the advantages of using a CPW for disrupting spores for biomarker release and detection.
|
|
| 2. |
- Valijam, Shayan, et al.
(författare)
-
Design of a low-voltage dielectrophoresis lab-on-the chip to separate tumor and blood cells
- 2023
-
Ingår i: Microfluidics and Nanofluidics. - : Springer Berlin/Heidelberg. - 1613-4982 .- 1613-4990. ; 27:3
-
Tidskriftsartikel (refereegranskat)abstract
- In this paper, we design and propose a compact label-free microfluidic lab-on-a-chip device to separate circulating tumor cells (CTCs) from red blood cells (RBCs) at low voltage to minimize cell damage. With the aim of developing a mm-long device to perform cell separation, we used 3D finite element simulation modeling and investigated separation efficiency for different electrode configurations, electrode shapes, and channel heights. Our results show that configuring the electrodes as two arrays, consisting of only five pairs of top and bottom planar electrodes shifted relative to each other and energized with ± 6 V at 70 kHz, generates sufficient non-uniform electric fields to separate CTCs and RBCs in a 2 mm long channel. The advantage of the proposed design is the simplicity of the electrode arrangement and that the electrodes do not cover the central part of the channel, thus allowing for brightfield imaging of the channel. In addition, the low voltage needed and the 50 µm high channel reduce the Joule heating effect and improve the device's separation and throughput efficiency. We suggest that the proposed design would be effective for separating CTCs and RBCs and, thus, used as a device for the early detection of CTCs.
|
|
| 3. |
- Valijam, Shayan, et al.
(författare)
-
Fabricating a dielectrophoretic microfluidic device using 3D-printed moulds and silver conductive paint
- 2023
-
Ingår i: Scientific Reports. - : Springer Nature. - 2045-2322. ; 13:1
-
Tidskriftsartikel (refereegranskat)abstract
- Dielectrophoresis is an electric field-based technique for moving neutral particles through a fluid. When used for particle separation, dielectrophoresis has many advantages compared to other methods, like providing label-free operation with greater control of the separation forces. In this paper, we design, build, and test a low-voltage dielectrophoretic device using a 3D printing approach. This lab-on-a-chip device fits on a microscope glass slide and incorporates microfluidic channels for particle separation. First, we use multiphysics simulations to evaluate the separation efficiency of the prospective device and guide the design process. Second, we fabricate the device in PDMS (polydimethylsiloxane) by using 3D-printed moulds that contain patterns of the channels and electrodes. The imprint of the electrodes is then filled with silver conductive paint, making a 9-pole comb electrode. Lastly, we evaluate the separation efficiency of our device by introducing a mixture of 3 μm and 10 μm polystyrene particles and tracking their progression. Our device is able to efficiently separate these particles when the electrodes are energized with ±12 V at 75 kHz. Overall, our method allows the fabrication of cheap and effective dielectrophoretic microfluidic devices using commercial off-the-shelf equipment.
|
|
