| 1. |
- Bender, R., et al.
(författare)
-
Corrosion challenges towards a sustainable society
- 2022
-
Ingår i: Materials and corrosion - Werkstoffe und Korrosion. - : Wiley. - 0947-5117 .- 1521-4176. ; 73:11, s. 1730-1751
-
Tidskriftsartikel (refereegranskat)abstract
- A global transition towards more sustainable, affordable and reliable energy systems is being stimulated by the Paris Agreement and the United Nation's 2030 Agenda for Sustainable Development. This poses a challenge for the corrosion industry, as building climate-resilient energy systems and infrastructures brings with it a long-term direction, so as a result the long-term behaviour of structural materials (mainly metals and alloys) becomes a major prospect. With this in mind “Corrosion Challenges Towards a Sustainable Society” presents a series of cases showing the importance of corrosion protection of metals and alloys in the development of energy production to further understand the science of corrosion, and bring the need for research and the consequences of corrosion into public and political focus. This includes emphasis on the limitation of greenhouse gas emissions, on the lifetime of infrastructures, implants, cultural heritage artefacts, and a variety of other topics.
|
|
| 2. |
- Zhang, S. -T, et al.
(författare)
-
Importance of atmospheric aerosol pollutants on the degradation of Al2O3 encapsulated Al-doped zinc oxide window layers in solar cells
- 2022
-
Ingår i: Progress in Photovoltaics. - : Wiley. - 1062-7995 .- 1099-159X. ; 30:5, s. 552-566
-
Tidskriftsartikel (refereegranskat)abstract
- Atmospheric aerosol pollutants are considered for the first time for the durability evaluation of non-metallic photovoltaic materials on the example of pristine and Al2O3-encapsulated Al-doped zinc oxide (AZO) window layers. The AZO samples were exposed to a varied temperature and humidity cycle, completed or not by a daily deposition of (NH4)2SO4 or NaCl aerosols, typical pollutants in rural and marine environments, respectively. The samples exposed with and without the pollutants were compared after 1 and 2 weeks of the test. Optical transmittance and conductivity significantly degraded only for the samples exposed with the pollutants. Raman spectroscopy, X-ray diffraction and X-ray photoelectron spectroscopy evidenced localized dissolution of the AZO film and chemical modification of the Al2O3 encapsulation. The most severe degradation was caused by (NH4)2SO4, which was attributed to the high stability of soluble [Zn (NH3)42+] complexes. The Al2O3 encapsulation improved chemical and physical stability of AZO in the presence of (NH4)2SO4 but not in the presence of NaCl. The latter can be explained by pitting corrosion of Al2O3. Optical transmission curves are coherent with the AZO layer thinning in the presence of NaCl and very localized AZO dissolution (most likely grain boundary etching) in the presence of (NH4)2SO4. The enhanced degradation of encapsulated AZO in the presence of atmospheric aerosol pollutants suggests that they cannot be neglected in the evaluation of barrier protection capacities of novel encapsulates and, more generally, in the outdoor durability assessment of novel photovoltaic materials and devices.
|
|
| 3. |
- Zhang, Xian, 1986-, et al.
(författare)
-
The initial release of zinc and aluminum from non-treated Galvalume and the formation of corrosion products in chloride containing media
- 2011
-
Ingår i: Applied Surface Science. - : Elsevier BV. - 0169-4332 .- 1873-5584. ; 258:10, s. 4351-4359
-
Tidskriftsartikel (refereegranskat)abstract
- This study explores the initial release of zinc and aluminum from non-treated Galvalume and the parallel formation of corrosion products when exposed to synthetic seawater and rainwater of different chloride content. Comparisons were made with long-term field exposures at non-sheltered marine conditions. Observed release rates from short-term conditions agree qualitatively with the long-term findings with a selective release of zinc over aluminum. The release and corrosion processes were intertwined through the formation of corrosion products with properties that influence the long-term release process. Prior to exposure, Al2O3 dominated the entire surface, and was subject to local destruction upon interaction with chloride ions. As a consequence Al2O3 was gradually replaced and covered by zinc-rich corrosion products primarily in interdendritic areas during the first year of marine exposure. This was followed by the gradual formation and integration of aluminum-rich corrosion products, reflected by an increased zinc release rate during the first year, followed by a gradually decreased rate during subsequent years. The importance of Al2O3 was also evident in deaerated synthetic rainwater or seawater, where the formation of Al2O3 was presumably hindered. In synthetic rain water this resulted in a higher ratio between released aluminum and zinc compared with non-deaerated conditions.
|
|
