| 1. |
|
|
| 2. |
- Kristanl, Matej, et al.
(författare)
-
The Seventh Visual Object Tracking VOT2019 Challenge Results
- 2019
-
Ingår i: 2019 IEEE/CVF INTERNATIONAL CONFERENCE ON COMPUTER VISION WORKSHOPS (ICCVW). - : IEEE COMPUTER SOC. - 9781728150239 ; , s. 2206-2241
-
Konferensbidrag (refereegranskat)abstract
- The Visual Object Tracking challenge VOT2019 is the seventh annual tracker benchmarking activity organized by the VOT initiative. Results of 81 trackers are presented; many are state-of-the-art trackers published at major computer vision conferences or in journals in the recent years. The evaluation included the standard VOT and other popular methodologies for short-term tracking analysis as well as the standard VOT methodology for long-term tracking analysis. The VOT2019 challenge was composed of five challenges focusing on different tracking domains: (i) VOT-ST2019 challenge focused on short-term tracking in RGB, (ii) VOT-RT2019 challenge focused on "real-time" short-term tracking in RGB, (iii) VOT-LT2019 focused on long-term tracking namely coping with target disappearance and reappearance. Two new challenges have been introduced: (iv) VOT-RGBT2019 challenge focused on short-term tracking in RGB and thermal imagery and (v) VOT-RGBD2019 challenge focused on long-term tracking in RGB and depth imagery. The VOT-ST2019, VOT-RT2019 and VOT-LT2019 datasets were refreshed while new datasets were introduced for VOT-RGBT2019 and VOT-RGBD2019. The VOT toolkit has been updated to support both standard short-term, long-term tracking and tracking with multi-channel imagery. Performance of the tested trackers typically by far exceeds standard baselines. The source code for most of the trackers is publicly available from the VOT page. The dataset, the evaluation kit and the results are publicly available at the challenge website(1).
|
|
| 3. |
- Luo, Yifei, et al.
(författare)
-
Technology Roadmap for Flexible Sensors
- 2023
-
Ingår i: ACS Nano. - : American Chemical Society. - 1936-0851 .- 1936-086X. ; 17:6, s. 5211-5295
-
Forskningsöversikt (refereegranskat)abstract
- Humans rely increasingly on sensors to address grand challenges and to improve quality of life in the era of digitalization and big data. For ubiquitous sensing, flexible sensors are developed to overcome the limitations of conventional rigid counterparts. Despite rapid advancement in bench-side research over the last decade, the market adoption of flexible sensors remains limited. To ease and to expedite their deployment, here, we identify bottlenecks hindering the maturation of flexible sensors and propose promising solutions. We first analyze challenges in achieving satisfactory sensing performance for real-world applications and then summarize issues in compatible sensor-biology interfaces, followed by brief discussions on powering and connecting sensor networks. Issues en route to commercialization and for sustainable growth of the sector are also analyzed, highlighting environmental concerns and emphasizing nontechnical issues such as business, regulatory, and ethical considerations. Additionally, we look at future intelligent flexible sensors. In proposing a comprehensive roadmap, we hope to steer research efforts towards common goals and to guide coordinated development strategies from disparate communities. Through such collaborative efforts, scientific breakthroughs can be made sooner and capitalized for the betterment of humanity.
|
|
| 4. |
- Liu, Wei, et al.
(författare)
-
Coherent dynamics of multi-spin V-B(-) center in hexagonal boron nitride
- 2022
-
Ingår i: Nature Communications. - : Nature Portfolio. - 2041-1723. ; 13:1
-
Tidskriftsartikel (refereegranskat)abstract
- Hexagonal boron nitride (hBN) has recently been demonstrated to contain optically polarized and detected electron spins that can be utilized for implementing qubits and quantum sensors in nanolayered-devices. Understanding the coherent dynamics ofmicrowave driven spins in hBN is of crucial importance for advancing these emerging new technologies. Here, we demonstrate and study the Rabi oscillation and related phenomena of a negatively charged boron vacancy (V-B(-)) spin ensemble in hBN. We report on different dynamics of the V-B(-) spins at weak and strong magnetic fields. In the former case the defect behaves like a single electron spin system, while in the latter case it behaves like a multi-spin system exhibiting multiple-frequency dynamical oscillation as beat in the Ramsey fringes. We also carry out theoretical simulations for the spin dynamics of V-B(-) and reveal that the nuclear spins can be driven via the strong electron nuclear coupling existing in V-B(-) center, which can be modulated by the magnetic field and microwave field.
|
|
| 5. |
- Mao, Rui, et al.
(författare)
-
Thermal behavior and kinetics analysis of co-combustion of petroleum coke and paper sludge-derived hydrochar
- 2022
-
Ingår i: Waste Management. - : Elsevier BV. - 0956-053X .- 1879-2456. ; 153, s. 405-414
-
Tidskriftsartikel (refereegranskat)abstract
- The co-combustion reactivity and kinetics of petroleum coke (PC) and paper sludge-derived hydrochar (PS) were investigated via thermogravimetric analysis. The physical and chemical structure features were also systemati-cally tested. The results show that the combustion process of PS could be divided into three stages, while for PC only one stage could be clarified. Due to high volatile content, developed pore structure and low carbon-order degree, the combustion reactivity of PS was higher than that of PC. Although the ignition property of the blends could be significantly improved by addition of PS, it changed little for the burnout temperature and as a result the combustion intensity was deteriorated. For the samples with addition of PS from 20 % to 80 %, the comprehensive combustion index decreased from 3.69 x 10-15 to 2.12 x 10-15. The Kissinger AkahiraSunose model-free method was used in the co-combustion reaction of PC and PS, and good fitting results were obtained. For different samples with varying addition of PS, the activation energies were in the range of 107.51-198.44 kJ/ mol, with the lowest value obtained at 20 % of PS, which was also the optimum proportion for co-combustion of PC and PS.
|
|
| 6. |
- Wang, Chuanfei, et al.
(författare)
-
Low Band Gap Polymer Solar Cells With Minimal Voltage Losses
- 2016
-
Ingår i: Advanced Energy Materials. - : Wiley. - 1614-6832 .- 1614-6840. ; 6:18
-
Tidskriftsartikel (refereegranskat)abstract
- One of the factors limiting the performance of organic solar cells (OSCs) is their large energy losses (E loss) in the conversion from photons to electrons, typically believed to be around 0.6 eV and often higher than those of inorganic solar cells. In this work, a novel low band gap polymer PIDTT-TID with a optical gap of 1.49 eV is synthesized and used as the donor combined with PC71BM in solar cells. These solar cells attain a good power conversion efficiency of 6.7% with a high open-circuit voltage of 1.0 V, leading to the E loss as low as 0.49 eV. A systematic study indicates that the driving force in this donor and acceptor system is sufficient for charge generation with the low E loss. This work pushes the minimal E loss of OSCs down to 0.49 eV, approaching the values of some inorganic and hybrid solar cells. It indicates the potential for further enhancement of the performance of OSCs by improving their V oc since the E loss can be minimized.
|
|
| 7. |
- Wang, Chuanfei, et al.
(författare)
-
Ternary organic solar cells with enhanced open circuit voltage
- 2017
-
Ingår i: Nano Energy. - : Elsevier BV. - 2211-2855 .- 2211-3282. ; 37, s. 24-31
-
Tidskriftsartikel (refereegranskat)abstract
- By introducing a non-fullerene small molecule acceptor as a third component to typical polymer donor: fullerene acceptor binary solar cells, we demonstrate that the short circuit current density (Jsc), open circuit voltage (Voc), power conversion efficiency (PCE) and thermal stability can be enhanced simultaneously. The different surface energy of each component causes most of the non-fullerene acceptor molecules to self-organize at the polymer/fullerene interface, while the appropriately selected oxidation/reduction potential of the non-fullerene acceptor enables the resulting ternary junction to work through a cascade mechanism. The cascade ternary junction enhances charge generation through complementary absorption between the non-fullerene and fullerene acceptors and aids the efficient charge extraction from fullerene domains. The bimolecular recombination in the ternary blend layer is reduced as the ternary cascade junction increases the separation of holes and electrons during charge transportation and the trap assistant recombination induced by integer charge transfer (ICT) state potentially reduced due to the smaller pinning energy of inserted non-fullerene acceptor, leading to an unprecedented increase in the open circuit voltage beyond the binary reference values.
|
|
| 8. |
- Zhang, Tiankai, et al.
(författare)
-
Ion-modulated radical doping of spiro-OMeTAD for more efficient and stable perovskite solar cells
- 2022
-
Ingår i: Science. - : AMER ASSOC ADVANCEMENT SCIENCE. - 0036-8075 .- 1095-9203. ; 377:6605, s. 495-501
-
Tidskriftsartikel (refereegranskat)abstract
- Record power conversion efficiencies (PCEs) of perovskite solar cells (PSCs) have been obtained with the organic hole transporter 2,2,7,7-tetrakis(N,N-di-p-methoxyphenyl-amine)9,9-spirobifluorene (spiro-OMeTAD). Conventional doping of spiro-OMeTAD with hygroscopic lithium salts and volatile 4-tert-butylpyridine is a time-consuming process and also leads to poor device stability. We developed a new doping strategy for spiro-OMeTAD that avoids post-oxidation by using stable organic radicals as the dopant and ionic salts as the doping modulator (referred to as ion-modulated radical doping). We achieved PCEs of >25% and much-improved device stability under harsh conditions. The radicals provide hole polarons that instantly increase the conductivity and work function (WF), and ionic salts further modulate the WF by affecting the energetics of the hole polarons. This organic semiconductor doping strategy, which decouples conductivity and WF tunability, could inspire further optimization in other optoelectronic devices.
|
|
| 9. |
- Arzoumanian, Doris, et al.
(författare)
-
Dust polarized emission observations of NGC 6334: BISTRO reveals the details of the complex but organized magnetic field structure of the high-mass star-forming hub-filament network
- 2021
-
Ingår i: Astronomy and Astrophysics. - : EDP Sciences. - 0004-6361 .- 1432-0746. ; 647
-
Tidskriftsartikel (refereegranskat)abstract
- Context. Molecular filaments and hubs have received special attention recently thanks to new studies showing their key role in star formation. While the (column) density and velocity structures of both filaments and hubs have been carefully studied, their magnetic field (B-field) properties have yet to be characterized. Consequently, the role of B-fields in the formation and evolution of hub-filament systems is not well constrained. Aims. We aim to understand the role of the B-field and its interplay with turbulence and gravity in the dynamical evolution of the NGC 6334 filament network that harbours cluster-forming hubs and high-mass star formation. Methods. We present new observations of the dust polarized emission at 850 μm toward the 2 pc × 10 pc map of NGC 6334 at a spatial resolution of 0.09 pc obtained with the James Clerk Maxwell Telescope (JCMT) as part of the B-field In STar-forming Region Observations (BISTRO) survey. We study the distribution and dispersion of the polarized intensity (PI), the polarization fraction (PF), and the plane-of-The-sky B-field angle (χB_POS) toward the whole region, along the 10 pc-long ridge and along the sub-filaments connected to the ridge and the hubs. We derived the power spectra of the intensity and χBPOS along the ridge crest and compared them with the results obtained from simulated filaments. Results. The observations span 3 orders of magnitude in Stokes I and PI and 2 orders of magnitude in PF (from 0.2 to 20%). A large scatter in PI and PF is observed for a given value of I. Our analyses show a complex B-field structure when observed over the whole region ( 10 pc); however, at smaller scales (1 pc), χBPOS varies coherently along the crests of the filament network. The observed power spectrum of χBPOS can be well represented with a power law function with a slope of-1.33 ± 0.23, which is 20% shallower than that of I. We find that this result is compatible with the properties of simulated filaments and may indicate the physical processes at play in the formation and evolution of star-forming filaments. Along the sub-filaments, χBPOS rotates frombeing mostly perpendicular or randomly oriented with respect to the crests to mostly parallel as the sub-filaments merge with the ridge and hubs. This variation of the B-field structure along the sub-filaments may be tracing local velocity flows of infalling matter in the ridge and hubs. Our analysis also suggests a variation in the energy balance along the crests of these sub-filaments, from magnetically critical or supercritical at their far ends to magnetically subcritical near the ridge and hubs. We also detect an increase in PF toward the high-column density (NH2 â 1023 cm-2) star cluster-forming hubs. These latter large PF values may be explained by the increase in grain alignment efficiency due to stellar radiation from the newborn stars, combined with an ordered B-field structure. Conclusions. These observational results reveal for the first time the characteristics of the small-scale (down to 0.1 pc) B-field structure of a 10 pc-long hub-filament system. Our analyses show variations in the polarization properties along the sub-filaments that may be tracing the evolution of their physical properties during their interaction with the ridge and hubs. We also detect an impact of feedback from young high-mass stars on the local B-field structure and the polarization properties, which could put constraints on possible models for dust grain alignment and provide important hints as to the interplay between the star formation activity and interstellar B-fields.
|
|
| 10. |
- Ching, Tao-Chung, et al.
(författare)
-
The JCMT BISTRO-2 Survey: Magnetic Fields of the Massive DR21 Filament
- 2022
-
Ingår i: Astrophysical Journal. - : American Astronomical Society. - 1538-4357 .- 0004-637X. ; 941:2
-
Tidskriftsartikel (refereegranskat)abstract
- We present 850 mu m dust polarization observations of the massive DR21 filament from the B-fields In STar-forming Region Observations (BISTRO) survey, using the POL-2 polarimeter and the SCUBA-2 camera on the James Clerk Maxwell Telescope. We detect ordered magnetic fields perpendicular to the parsec-scale ridge of the DR21 main filament. In the subfilaments, the magnetic fields are mainly parallel to the filamentary structures and smoothly connect to the magnetic fields of the main filament. We compare the POL-2 and Planck dust polarization observations to study the magnetic field structures of the DR21 filament on 0.1-10 pc scales. The magnetic fields revealed in the Planck data are well-aligned with those of the POL-2 data, indicating a smooth variation of magnetic fields from large to small scales. The plane-of-sky magnetic field strengths derived from angular dispersion functions of dust polarization are 0.6-1.0 mG in the DR21 filament and similar to 0.1 mG in the surrounding ambient gas. The mass-to-flux ratios are found to be magnetically supercritical in the filament and slightly subcritical to nearly critical in the ambient gas. The alignment between column density structures and magnetic fields changes from random alignment in the low-density ambient gas probed by Planck to mostly perpendicular in the high-density main filament probed by James Clerk Maxwell Telescope. The magnetic field structures of the DR21 filament are in agreement with MHD simulations of a strongly magnetized medium, suggesting that magnetic fields play an important role in shaping the DR21 main filament and subfilaments.
|
|
| 11. |
- Doi, Yasuo, et al.
(författare)
-
The JCMT BISTRO Survey: Magnetic Fields Associated with a Network of Filaments in NGC 1333
- 2020
-
Ingår i: Astrophysical Journal. - : American Astronomical Society. - 1538-4357 .- 0004-637X. ; 899:1
-
Tidskriftsartikel (refereegranskat)abstract
- We present new observations of the active star formation region NGC 1333 in the Perseus molecular cloud complex from the James Clerk Maxwell Telescope B-Fields In Star-forming Region Observations (BISTRO) survey with the POL-2 instrument. The BISTRO data cover the entire NGC 1333 complex (∼1.5 pc ? 2 pc) at 0.02 pc resolution and spatially resolve the polarized emission from individual filamentary structures for the first time. The inferred magnetic field structure is complex as a whole, with each individual filament aligned at different position angles relative to the local field orientation. We combine the BISTRO data with low- and high- resolution data derived from Planck and interferometers to study the multiscale magnetic field structure in this region. The magnetic field morphology drastically changes below a scale of ∼1 pc and remains continuous from the scales of filaments (∼0.1 pc) to that of protostellar envelopes (∼0.005 pc or ∼1000 au). Finally, we construct simple models in which we assume that the magnetic field is always perpendicular to the long axis of the filaments. We demonstrate that the observed variation of the relative orientation between the filament axes and the magnetic field angles are well reproduced by this model, taking into account the projection effects of the magnetic field and filaments relative to the plane of the sky. These projection effects may explain the apparent complexity of the magnetic field structure observed at the resolution of BISTRO data toward the filament network.
|
|
| 12. |
- Eswaraiah, Chakali, et al.
(författare)
-
The JCMT BISTRO Survey: Revealing the Diverse Magnetic Field Morphologies in Taurus Dense Cores with Sensitive Submillimeter Polarimetry
- 2021
-
Ingår i: Astrophysical Journal Letters. - : American Astronomical Society. - 2041-8213 .- 2041-8205. ; 912:2
-
Tidskriftsartikel (refereegranskat)abstract
- We have obtained sensitive dust continuum polarization observations at 850 μm in the B213 region of Taurus using POL-2 on SCUBA-2 at the James Clerk Maxwell Telescope as part of the B-fields in STar-forming Region Observations (BISTRO) survey. These observations allow us to probe magnetic field (B-field) at high spatial resolution (∼2000 au or ∼0.01 pc at 140 pc) in two protostellar cores (K04166 and K04169) and one prestellar core (Miz-8b) that lie within the B213 filament. Using the Davis-Chandrasekhar-Fermi method, we estimate the B-field strengths in K04166, K04169, and Miz-8b to be 38 ± 14, 44 ± 16, and 12 ± 5 μG, respectively. These cores show distinct mean B-field orientations. The B-field in K04166 is well ordered and aligned parallel to the orientations of the core minor axis, outflows, core rotation axis, and large-scale uniform B-field, in accordance with magnetically regulated star formation via ambipolar diffusion taking place in K04166. The B-field in K04169 is found to be ordered but oriented nearly perpendicular to the core minor axis and large-scale B-field and not well correlated with other axes. In contrast, Miz-8b exhibits a disordered B-field that shows no preferred alignment with the core minor axis or large-scale field. We found that only one core, K04166, retains a memory of the large-scale uniform B-field. The other two cores, K04169 and Miz-8b, are decoupled from the large-scale field. Such a complex B-field configuration could be caused by gas inflow onto the filament, even in the presence of a substantial magnetic flux.
|
|
| 13. |
- Karoly, Janik, et al.
(författare)
-
The JCMT BISTRO Survey: Studying the Complex Magnetic Field of L43
- 2023
-
Ingår i: Astrophysical Journal. - 1538-4357 .- 0004-637X. ; 952:1
-
Tidskriftsartikel (refereegranskat)abstract
- We present observations of polarized dust emission at 850 mu m from the L43 molecular cloud, which sits in the Ophiuchus cloud complex. The data were taken using SCUBA-2/POL-2 on the James Clerk Maxwell Telescope as a part of the BISTRO large program. L43 is a dense (N-H2 similar to 10(22) - 10(23) cm(-2)) complex molecular cloud with a submillimeter-bright starless core and two protostellar sources. There appears to be an evolutionary gradient along the isolated filament that L43 is embedded within, with the most evolved source closest to the Sco OB2 association. One of the protostars drives a CO outflow that has created a cavity to the southeast. We see a magnetic field that appears to be aligned with the cavity walls of the outflow, suggesting interaction with the outflow. We also find a magnetic field strength of up to similar to 160 +/- 30 mu G in the main starless core and up to similar to 90 +/- 40 mu G in the more diffuse, extended region. These field strengths give magnetically super- and subcritical values, respectively, and both are found to be roughly trans-Alfvenic. We also present a new method of data reduction for these denser but fainter objects like starless cores.
|
|
| 14. |
- Kwon, Woojin, et al.
(författare)
-
B-fields in Star-forming Region Observations (BISTRO): Magnetic Fields in the Filamentary Structures of Serpens Main
- 2022
-
Ingår i: Astrophysical Journal. - : American Astronomical Society. - 1538-4357 .- 0004-637X. ; 926:2
-
Tidskriftsartikel (refereegranskat)abstract
- We present 850 mu m polarimetric observations toward the Serpens Main molecular cloud obtained using the POL-2 polarimeter on the James Clerk Maxwell Telescope as part of the B-fields In STar-forming Region Observations survey. These observations probe the magnetic field morphology of the Serpens Main molecular cloud on about 6000 au scales, which consists of cores and six filaments with different physical properties such as density and star formation activity. Using the histogram of relative orientation (HRO) technique, we find that magnetic fields are parallel to filaments in less-dense filamentary structures where NH2 < 0.93 x 10(22) cm(-2) (magnetic fields perpendicular to density gradients), while they are perpendicular to filaments (magnetic fields parallel to density gradients) in dense filamentary structures with star formation activity. Moreover, applying the HRO technique to denser core regions, we find that magnetic field orientations change to become perpendicular to density gradients again at NH2 approximate to 4.6 x 10(22) NH2 approximate to 16 x 10(22) cm(-2), magnetic fields change back to being parallel to density gradients once again, which can be understood to be due to magnetic fields being dragged in by infalling material. In addition, we estimate the magnetic field strengths of the filaments (B-POS = 60-300 mu G)) using the Davis-Chandrasekhar-Fermi method and discuss whether the filaments are gravitationally unstable based on magnetic field and turbulence energy densities.
|
|
| 15. |
- Lyo, A-Ran, et al.
(författare)
-
The JCMT BISTRO Survey: An 850/450 mu m Polarization Study of NGC 2071IR in Orion B
- 2021
-
Ingår i: Astrophysical Journal. - : American Astronomical Society. - 1538-4357 .- 0004-637X. ; 918:2
-
Tidskriftsartikel (refereegranskat)abstract
- We present the results of simultaneous 450 mu m and 850 mu m polarization observations toward the massive star-forming region NGC 2071IR, a target of the BISTRO (B-fields in STar-forming Region Observations) Survey, using the POL-2 polarimeter and SCUBA-2 camera mounted on the James Clerk Maxwell Telescope. We find a pinched magnetic field morphology in the central dense core region, which could be due to a rotating toroidal disklike structure and a bipolar outflow originating from the central young stellar object IRS 3. Using the modified Davis-Chandrasekhar-Fermi method, we obtain a plane-of-sky magnetic field strength of 563 +/- 421 mu G in the central similar to 0.12 pc region from 850 mu m polarization data. The corresponding magnetic energy density of 2.04 x 10(-8) erg cm(-3) is comparable to the turbulent and gravitational energy densities in the region. We find that the magnetic field direction is very well aligned with the whole of the IRS 3 bipolar outflow structure. We find that the median value of polarization fractions is 3.0% at 450 mu m in the central 3 ' region, which is larger than the median value of 1.2% at 850 mu m. The trend could be due to the better alignment of warmer dust in the strong radiation environment. We also find that polarization fractions decrease with intensity at both wavelengths, with slopes, determined by fitting a Rician noise model of 0.59 +/- 0.03 at 450 mu m and 0.36 +/- 0.04 at 850 mu m, respectively. We think that the shallow slope at 850 mu m is due to grain alignment at the center being assisted by strong radiation from the central young stellar objects.
|
|
| 16. |
- Ngoc, Nguyen Bich, et al.
(författare)
-
Observations of Magnetic Fields Surrounding LkH alpha 101 Taken by the BISTRO Survey with JCMT-POL-2
- 2021
-
Ingår i: Astrophysical Journal. - : American Astronomical Society. - 1538-4357 .- 0004-637X. ; 908:1
-
Tidskriftsartikel (refereegranskat)abstract
- We report the first high spatial resolution measurement of magnetic fields surrounding LkH alpha 101, part of the Auriga-California molecular cloud. The observations were taken with the POL-2 polarimeter on the James Clerk Maxwell Telescope within the framework of the B-fields In Star-forming Region Observations (BISTRO) survey. Observed polarization of thermal dust emission at 850 mu m is found to be mostly associated with the redshifted gas component of the cloud. The magnetic field displays a relatively complex morphology. Two variants of the Davis-Chandrasekhar-Fermi method, unsharp masking and structure function, are used to calculate the strength of magnetic fields in the plane of the sky, yielding a similar result of B-POS similar to 115 mu G. The mass-to-magnetic-flux ratio in critical value units, lambda similar to 0.3, is the smallest among the values obtained for other regions surveyed by POL-2. This implies that the LkH alpha 101 region is subcritical, and the magnetic field is strong enough to prevent gravitational collapse. The inferred delta B/B-0 similar to 0.3 implies that the large-scale component of the magnetic field dominates the turbulent one. The variation of the polarization fraction with total emission intensity can be fitted by a power law with an index of alpha = 0.82 0.03, which lies in the range previously reported for molecular clouds. We find that the polarization fraction decreases rapidly with proximity to the only early B star (LkH alpha 101) in the region. Magnetic field tangling and the joint effect of grain alignment and rotational disruption by radiative torques can potentially explain such a decreasing trend.
|
|
| 17. |
- Tahani, Mehrnoosh, et al.
(författare)
-
JCMT BISTRO Observations: Magnetic Field Morphology of Bubbles Associated with NGC 6334
- 2023
-
Ingår i: Astrophysical Journal. - : American Astronomical Society. - 1538-4357 .- 0004-637X. ; 944:2
-
Tidskriftsartikel (refereegranskat)abstract
- We study the Hii regions associated with the NGC 6334 molecular cloud observed in the submillimeter and taken as part of the B-fields In STar-forming Region Observations Survey. In particular, we investigate the polarization patterns and magnetic field morphologies associated with these Hii regions. Through polarization pattern and pressure calculation analyses, several of these bubbles indicate that the gas and magnetic field lines have been pushed away from the bubble, toward an almost tangential (to the bubble) magnetic field morphology. In the densest part of NGC 6334, where the magnetic field morphology is similar to an hourglass, the polarization observations do not exhibit observable impact from Hii regions. We detect two nested radial polarization patterns in a bubble to the south of NGC 6334 that correspond to the previously observed bipolar structure in this bubble. Finally, using the results of this study, we present steps (incorporating computer vision; circular Hough transform) that can be used in future studies to identify bubbles that have physically impacted magnetic field lines.
|
|
| 18. |
- Wang, Guo-dong, et al.
(författare)
-
The genomics of selection in dogs and the parallel evolution between dogs and humans
- 2013
-
Ingår i: Nature Communications. - : Nature Publishing Group. - 2041-1723. ; 4, s. 1860-
-
Tidskriftsartikel (refereegranskat)abstract
- The genetic bases of demographic changes and artificial selection underlying domestication are of great interest in evolutionary biology. Here we perform whole-genome sequencing of multiple grey wolves, Chinese indigenous dogs and dogs of diverse breeds. Demographic analysis show that the split between wolves and Chinese indigenous dogs occurred 32,000 years ago and that the subsequent bottlenecks were mild. Therefore, dogs may have been under human selection over a much longer time than previously concluded, based on molecular data, perhaps by initially scavenging with humans. Population genetic analysis identifies a list of genes under positive selection during domestication, which overlaps extensively with the corresponding list of positively selected genes in humans. Parallel evolution is most apparent in genes for digestion and metabolism, neurological process and cancer. Our study, for the first time, draws together humans and dogs in their recent genomic evolution.
|
|
| 19. |
- Wang, Heyong, et al.
(författare)
-
Efficient perovskite light-emitting diodes based on a solution-processed tin dioxide electron transport layer
- 2018
-
Ingår i: Journal of Materials Chemistry C. - : ROYAL SOC CHEMISTRY. - 2050-7526 .- 2050-7534. ; 6:26, s. 6996-7002
-
Tidskriftsartikel (refereegranskat)abstract
- To achieve high-performance perovskite light-emitting diodes (PeLEDs), an appropriate functional layer beneath the perovskite emissive layer is significantly important to modulate the morphology of the perovskite film and to facilitate charge injection and transport in the device. Herein, for the first time, we report efficient n-i-p structured PeLEDs using solution-processed SnO2 as an electron transport layer. Three-dimensional perovskites, such as CH(NH2)(2)PbI3 and CH3NH3PbI3, are found to be more chemically compatible with SnO2 than with commonly used ZnO. In addition, SnO2 shows good transparency, excellent morphology and suitable energy levels. These properties make SnO2 a promising candidate in both three-and low-dimensional PeLEDs, among which a high external quantum efficiency of 7.9% has been realized. Furthermore, interfacial materials that are widely used to improve the device performances of ZnO-based PeLEDs are also applied on SnO2-based PeLEDs and their effects have been systematically studied. In contrast to ZnO, SnO2 modified by these interfacial materials shows detrimental effects due to photoluminescence quenching.
|
|
| 20. |
- Xing, Xing, et al.
(författare)
-
The trade-off between electrochromic stability and contrast of a thiophene-Quinoxaline copolymer
- 2017
-
Ingår i: Electrochimica Acta. - : Elsevier BV. - 0013-4686 .- 1873-3859. ; 253, s. 530-535
-
Tidskriftsartikel (refereegranskat)abstract
- The stability of organic electrochromic devices is a crucial issue for their applications. However, until now the degradation mechanism of electrochromic materials are still not fully understood especially for electrochromic conjugated polymers (ECPs). To improve device stability, intensive investigation on the degradation mechanism of ECPs is urgently needed. Here we report our study on the electrochromic degradation in a thiophene-quinoxaline copolymer: poly [2,3-bis-(3-octyloxyphenyl) quinoxaline-5,8diyl- alt-thiophene-2,5-diyl] (TQ1). The results of X-ray photoelectron spectroscopy (XPS), ultraviolet photoelectron spectra (UPS) and UV-vis transmission spectra reveal that there are three main factors during the electrochromic degradation of TQ1. The first one is anion (ClO4-) irreversibly deep trapped, while the second is peroxidation of the thiophene group in TQ1. Both factors reduce the conductivity and electrochromism of TQ1. The third is structural relaxation resulting lager conjugated system of TQ1 molecules in film, which is gradually developed during 400 cycling of CV at a narrow potential range (01 V). When a potential range 0-0.7 V is applied, all three factors are prohibited, no electrochromism degradation is observed anymore, although the contrast becomes smaller. Our investigation systematically discloses the degradation mechanism during the electrochemistry processing of a ECP (TQ1), demonstrating the significance of trade-off between the electrochromic stability and contrast of the ECP.
|
|
| 21. |
- Yang, Jia-Xiang, et al.
(författare)
-
Facile synthesis, optical properties and theoretical calculation of two novel two-photon absorption chromophores
- 2010
-
Ingår i: Journal of Luminescence. - : Elsevier BV. - 0022-2313 .- 1872-7883. ; 130:4, s. 654-659
-
Tidskriftsartikel (refereegranskat)abstract
- Two heterocycle-based derivatives that can be used as two-photon absorption chromophore, 9-butyl-3-(2,6-diphenylpyridin-4-yl)-9H-carbazole (BDPYC) and 9-butyl-3-(4-(2, 6-diphenylpyridin-4-yl)styryl)-9H-carbazole (BDPSC) have been successfully synthesized and fully characterized by elemental analysis, IR, H-1 NMR, C-13 NMR and MS. The molecules possess D-pi-A structures, but have different pi bridge. The 9-butylcarbazole is used as a donor (D), and the pyridine ring is used as an acceptor (A). One- and two-photon absorption and excited fluorescence properties in various solvents were experimentally investigated. Two-photon initiated optical data recording experiments have been carried Out under 740 nm laser radiation, and the possible mechanism of optical data storage is discussed based on theoretical calculations.
|
|
| 22. |
- Bao, Qinye, et al.
(författare)
-
Interfaces of (Ultra)thin Polymer Films in Organic Electronics
- 2019
-
Ingår i: Advanced Materials Interfaces. - : WILEY. - 2196-7350. ; 6:1
-
Forskningsöversikt (refereegranskat)abstract
- In this short review the energy level alignment of interfaces involving solution-processed conjugated polymer (and soluble small molecules) films is described. Some general material properties of conjugated polymers and their solution-processed films are introduced, and the basic physics involved in energy level alignment at their interfaces is then discussed. An overview of energy level bending in (ultra)thin conjugated polymer films (often referred to as "band bending") is given and the effects of ion-containing interlayers typically used in organic electronic devices such as polymer light emitting diodes and organic bulk heterojunction solar cells are explored. The review finishes by describing a few of the available computational models useful for predicting and/or modeling energy level alignment at interfaces of solution-processed polymer films and discusses their respective strengths and weaknesses.
|
|
| 23. |
|
|
| 24. |
- Li, Xiane, et al.
(författare)
-
Mapping the energy level alignment at donor/acceptor interfaces in non-fullerene organic solar cells
- 2022
-
Ingår i: Nature Communications. - : Nature Portfolio. - 2041-1723. ; 13:1
-
Tidskriftsartikel (refereegranskat)abstract
- Energy level alignment (ELA) at donor-acceptor heterojunctions is of vital importance yet largely undetermined in organic solar cells. Here, authors determine the heterojunction ELA with (mono) layer-by-layer precision to understand the co-existence of efficient charge. Energy level alignment (ELA) at donor (D) -acceptor (A) heterojunctions is essential for understanding the charge generation and recombination process in organic photovoltaic devices. However, the ELA at the D-A interfaces is largely underdetermined, resulting in debates on the fundamental operating mechanisms of high-efficiency non-fullerene organic solar cells. Here, we systematically investigate ELA and its depth-dependent variation of a range of donor/non-fullerene-acceptor interfaces by fabricating and characterizing D-A quasi bilayers and planar bilayers. In contrast to previous assumptions, we observe significant vacuum level (VL) shifts existing at the D-A interfaces, which are demonstrated to be abrupt, extending over only 1-2 layers at the heterojunctions, and are attributed to interface dipoles induced by D-A electrostatic potential differences. The VL shifts result in reduced interfacial energetic offsets and increased charge transfer (CT) state energies which reconcile the conflicting observations of large energy level offsets inferred from neat films and large CT energies of donor - non-fullerene-acceptor systems.
|
|
| 25. |
- Ouyang, Liangqi, et al.
(författare)
-
The contraction of PEDOT films formed on a macromolecular liquid-like surface
- 2018
-
Ingår i: Journal of Materials Chemistry C. - : ROYAL SOC CHEMISTRY. - 2050-7526 .- 2050-7534. ; 6:3, s. 654-660
-
Tidskriftsartikel (refereegranskat)abstract
- Vapour phase polymerized (VPP) PEDOT obtained using triblock copolymer PEG-PPG-PEG: Fe(III) tosylate polymeric oxidative layers has shown record-high conductivity and unique thermoelectric properties. These properties are related to the molecular weight, morphology and doping of PEDOT. Here we show that in its unwashed condition, the PEDOT chain adopts a neutral benzenoid conformation. The polymer chain converts into the charged quinoid structure after the removal of oxidizers with solvent washing. X-ray diffraction results suggest that the dopant is also incorporated into the packed polymer after the washing process. The changes in the chain structure and doping lead to the characteristic polaron and bipolaron absorption in the 800 and 1200 nm range. We observed a large contraction of the film after washing that is likely due to these changes, along with the removal of excessive polymer: oxidizer trapped in the PEDOT matrix. The contraction of films can be completely suppressed by mechanical clamping. PEDOT films without contraction show both a higher conductivity and higher optical transparency.
|
|
| 26. |
- Qin, Leiqiang, et al.
(författare)
-
A flexible semitransparent photovoltaic supercapacitor based on water-processed MXene electrodes
- 2020
-
Ingår i: Journal of Materials Chemistry A. - : Royal Society of Chemistry. - 2050-7488 .- 2050-7496. ; 8:11, s. 5467-5475
-
Tidskriftsartikel (refereegranskat)abstract
- Solar energy, although it has the highest power density available in terms of renewable energy, has the drawback of being erratic. Integrating an energy harvesting and storage device into photovoltaic energy storage modules is a viable route for obtaining self-powered energy systems. Herein, an MXene-based all-solution processed semitransparent flexible photovoltaic supercapacitor (PSC) was fabricated by integrating a flexible organic photovoltaic (OPV) with Ti3C2Tx MXene as the electrode and transparent MXene supercapacitors with an organic ionogel as the electrolyte in the vertical direction, using Ti3C2Tx thin film as a common electrode. In the quest for a semitransparent flexible PSC, Ti3C2Tx MXene was first used as a transparent electrode for OPV with a high power conversion efficiency of 13.6%. The ionogel electrolyte-based transparent MXene supercapacitor shows a high volumetric capacitance of 502 F cm(-3) and excellent stability. Finally, a flexible PSC with a high average transmittance of over 33.5% was successfully constructed by all-solution processing and a remarkable storage efficiency of 88% was achieved. This strategy enables a simple route for fabricating MXene based high-performance all-solution-processed flexible PSCs, which is important for realizing flexible and printable electronics for future technologies.
|
|
| 27. |
- Wang, Chuan Fei, et al.
(författare)
-
Diluted Organic Semiconductors in Photovoltaics
- 2020
-
Ingår i: Solar RRL. - : WILEY-V C H VERLAG GMBH. - 2367-198X. ; 4:9
-
Tidskriftsartikel (refereegranskat)abstract
- Incorporation of insulating polymers or molecules into organic semiconductor films, creating so-called diluted organic semiconductors, has been successfully used both in organic field-effect transistors and organic light-emitting diodes to reduce sensitivity to charge traps. However, application of this strategy in organic photovoltaics is challenging due to the complex requirements on the light-absorbing blend layer. Herein, diluted donor-acceptor-insulator ternary organic solar cells are developed to improve mobility and decrease radiative and nonradiative recombination in the active layer. In addition, both thermal and environmental stability of the diluted ternary solar cells are enhanced. Finally, the diluted semiconductor approach enables large-area solar cells to be fabricated where the loss in power density upon cell area upscaling is five times lower than for the equivalent binary cells.
|
|
| 28. |
- Wang, Chuan Fei, et al.
(författare)
-
Thermal-annealing effects on energy level alignment at organic heterojunctions and corresponding voltage losses in all-polymer solar cells
- 2020
-
Ingår i: Nano Energy. - : ELSEVIER. - 2211-2855 .- 2211-3282. ; 72
-
Tidskriftsartikel (refereegranskat)abstract
- Matched energy level alignment is a key requirement for efficient organic devices such as organic light-emitting diodes, photovoltaics, and field-effect transistors. The effect of thermal stress/annealing on energy level alignment and related properties of the devices are less discussed compared to the extensively explored effect on morphology and corresponding device performance. Here all polymer solar cells (all-PSCs) are employed to study thermal annealing effects on energy level alignment and the corresponding effect on the device properties of the all-PSCs. It is found that optimized energy level alignment can be achieved by thermal annealing. An interface dipole layer at the donor/acceptor interface is introduced by energy level realignment that assists charge generation by reducing geminate recombination so that the voltage loss is dramatically reduced, improving the performance of the all-PSCs.
|
|
| 29. |
- Wanzhu, Cai, et al.
(författare)
-
Dedoping-induced interfacial instability of poly(ethylene imine)s-treated PEDOT:PSS as a low-work-function electrode
- 2020
-
Ingår i: Journal of Materials Chemistry C. - : ROYAL SOC CHEMISTRY. - 2050-7526 .- 2050-7534. ; 8:1, s. 328-336
-
Tidskriftsartikel (refereegranskat)abstract
- Transparent organic electrodes printed from high-conductivity PEDOT:PSS have become essential for upscaling all-carbon based, low-cost optoelectronic devices. In the printing process, low-work-function PEDOT:PSS electrodes (cathode) are achieved by coating an ultra-thin, non-conjugated polyelectrolyte that is rich in amine groups, such as poly(ethylene imine) (PEI) or its ethoxylated derivative (PEIE), onto PEDOT:PSS surfaces. Here, we mapped the physical and chemical processes that occur at the interface between thin PEIx (indicating either PEI or PEIE) and PEDOT:PSS during printing. We identify that there is a dedoping effect of PEDOT induced by the PEIx. Using infrared spectroscopy, we found that the amine-rich PEIx can form chemical bonds with the dopant, PSS. At lower PSS concentration, PEIx also shows an electron-transfer effect to the charged PEDOT chain. These interface reactions lock the surface morphology of PEDOT:PSS, preventing the redistribution of PSS, and reduce the work function. Subsequent exposure to oxygen during the device fabrication process, on the other hand, can result in redoping of the low-work-function PEDOT:PSS interface, causing problems for printing reproducible devices under ambient conditions.
|
|
| 30. |
- Wouk de Menezes, Luana, et al.
(författare)
-
Charge Transfer Dynamics and Device Performance of Environmentally Friendly Processed Nonfullerene Organic Solar Cells
- 2018
-
Ingår i: ACS Applied Energy Materials. - : AMER CHEMICAL SOC. - 2574-0962. ; 1:9, s. 4776-4785
-
Tidskriftsartikel (refereegranskat)abstract
- In the last years, one of the pursuits has been to replace the use of halogenated solvent during the processing of organic photovoltaic (OPV) devices. Herein, we investigate the nonhalogenated solvent, o-methylanisole (o-MA) and the well stabilized o-dichlorobenzene (o-DCB) to process the bulk heterojunction (BHJ) based on PTB7-Th donor (D) and 3,9-bis(2-methylene-(3-(1,1-dicyanomethylene)-indanone))-5,5,11,11-tetrakis(4-hexylphenyl)-dithieno[2,3-d:2,3 - d]-s-indaceno [1,2-b:5,6-b] dithiophene) (ITIC) acceptor (A). The formation of D A interfaces with different (solvent-dependent) characteristics was verified by steady-state photoluminescence and morphological and electrical measurements. These measurements show a rather comparable device efficiency of the PTB7-th:ITIC BHJ processed by o-MA (compared to the device processed using o-DCB) despite the lower absorption of the films and the lower V-OC. Also, the charge-transfer (CT) state formation was investigated and the reasons behind the V-OC losses were correlated to the interface variations when processed by different solvents. Some experimental results are then discussed in light of the electronic structure of the molecules calculated using the density functional theory (DFT) method. The comparison between the experimental data and the theoretical calculations give some insights about the microscopic processes involved in the variation of the devices properties processed using the o-DCB and o-Ma solvents. We concluded that the D-A distance clearly affects the CT state energy and consequently the V-OC. Furthermore, higher air stability is observed when the active layer is processed using o-MA instead of o-DCB. The better stability was observed in self-lifetime measurements and air-processed devices.
|
|
| 31. |
- Yuan, Zhongcheng, et al.
(författare)
-
Interface-assisted cation exchange enables high-performance perovskiteLEDs with tunable near-infrared emissions
- 2022
-
Ingår i: Joule. - : Cell Press. - 2542-4351. ; 6:10, s. 2423-2436
-
Tidskriftsartikel (refereegranskat)abstract
- Achieving high-quality cesium-formamidinium lead iodide (CsxFA1_xPbI3) perovskites with tunable band gaps is highly desired for optoelectronic applications including solar cells and light -emit-ting diodes (LEDs). Herein, by utilizing an alkaline-interface-assisted cation-exchange method, we fabricate highly emissive CsxFA1_x PbI3 perovskite films with fine-tunable Cs-FA alloying ratio for emis-sion-tunable near-infrared (NIR) LEDs. We reveal that the deproto-nation of FA+ cations and the formation of hydrogen-bonded gels consisting of CsI and FA facilitated by the zinc oxide underneath effectively removes the Cs-FA ion-exchange barrier, promoting the formation of phase-pure CsxFA1_xPbI3 films with tunable emis-sions filling the gap between that of pure Cs-and FA-based perov-skites. The obtained NIR perovskite LEDs (PeLEDs) peaking from 715 to 780 nm simultaneously demonstrate high peak external quantum efficiencies of over 15%, maximum radiances exceeding 300 W sr_1 m_2, and high power conversion efficiencies above 10% at 100 mA cm_2, representing the best-performing LEDs based on solution-processed NIR emitters in a similar region.
|
|
| 32. |
- Zhang, Qilun, et al.
(författare)
-
Understanding the Work Function Modification by a Self-assembled Polyvinylpyrrolidone Layer in Inverted Organic Solar Cells
- 2021
-
Ingår i: Solar RRL. - : Wiley-VCH Verlagsgesellschaft. - 2367-198X. ; 5:1
-
Tidskriftsartikel (refereegranskat)abstract
- Polyvinylpyrrolidone (PVP) has been successfully used as the cathode interfacial layer (CIL) in organic solar cells (OSCs) for work function (W-F) modification. However, detailed insight into the effect of a PVP interlayer on the physicochemical properties of the indium tin oxide (ITO) electrode in inverted OSCs (I-OSCs) is still largely absent. Herein, the ITO/PVP interface is investigated by photoelectron spectroscopy and the mechanisms for the energy level alignment of PVP on different substrates in general are unraveled. The results indicate that the dipole formation that reduces the W-F is driven by not only the directional intrinsic molecular dipole moments associated with the gamma-lactam of PVP, but also an additional dipole step with the same direction created by the image charges in the contacting (semi-)conductor layer. In addition, high-performance inverted OSCs (I-OSCs) are achieved by introducing a self-assembled ultrathin PVP layer using a simple immersion method. This work provides enhanced understanding of the PVP-based CIL and demonstrates its great potential in I-OSC fabrication, which can pave the way to simplified manufacturing of low-cost and large-area devices in organic electronic technologies.
|
|
| 33. |
- Zhang, Shuo, et al.
(författare)
-
High-Fidelity Conformal Printing of 3D Liquid Alloy Circuits for Soft Electronics
- 2019
-
Ingår i: ACS Applied Materials and Interfaces. - : AMER CHEMICAL SOC. - 1944-8244 .- 1944-8252. ; 11:7, s. 7148-7156
-
Tidskriftsartikel (refereegranskat)abstract
- Owing to the great deformability from fluid, liquid alloy-based soft electronics has inherent advantages over rigid-based ones for applications such as stretchable intelligence or soft robotics, where high fidelity of three-dimensional (3D) conformability or dynamic morphology is required. However, current fabrications heavily rely on planar techniques, which severely limit their great potential in such attracting applications. By tuning the wettability of liquid alloy on a soft substrate through a selective surface morphology modification, we present a flexography printing technique of liquid alloy circuits on both planar (from diverse materials) and 3D complex surfaces and investigate the tuning mechanism and the relation between liquid alloy wettability and surface morphology modification. In a demonstration, high-fidelity printing of liquid alloy circuits can be deployed not only on the outline but also on small pits of strawberry surface, and the circuits work well in a dynamic deformation. Furthermore, being compatible with current industry process, our technique can be highly potential for future mass manufacturing of liquid alloy-based soft electronics.
|
|
| 34. |
- Zhou, Ke, et al.
(författare)
-
pi-pi Stacking Distance and Phase Separation Controlled Efficiency in Stable All-Polymer Solar Cells
- 2019
-
Ingår i: Polymers. - : MDPI. - 2073-4360. ; 11:10
-
Tidskriftsartikel (refereegranskat)abstract
- The morphology of the active layer plays a crucial role in determining device performance and stability for organic solar cells. All-polymer solar cells (All-PSCs), showing robust and stable morphologies, have been proven to give better thermal stability than their fullerene counterparts. However, outstanding thermal stability is not always the case for polymer blends, and the limiting factors responsible for the poor thermal stability in some All-PSCs, and how to obtain higher efficiency without losing stability, still remain unclear. By studying the morphology of poly [2,3-bis (3-octyloxyphenyl) quinoxaline-5,8-diyl-alt-thiophene-2,5-diyl](TQ1)/poly[4,8-bis[5-(2-ethylhexyl)-2-thienyl]benzo[1,2-b:4,5-b ]dithiophene-alt-(4-(2-ethylhexyl)-3-fluorothieno[3,4-b]thiophene-)-2-carboxylate-2-6-diyl]] (PCE10)/PNDI-T10 blend systems, we found that the rearranged molecular packing structure and phase separation were mainly responsible for the poor thermal stability in devices containing PCE10. The TQ1/PNDI-T10 devices exhibited an improved PCE with a decreased pi-pi stacking distance after thermal annealing; PCE10/PNDI-T10 devices showed a better pristine PCE, however, thermal annealing induced the increased pi-pi stacking distance and thus inferior hole conductivity, leading to a decreased PCE. Thus, a maximum PCE could be achieved in a TQ1/PCE10/PNDI-T10 (1/1/1) ternary system after thermal annealing resulting from their favorable molecular interaction and the trade-off of molecular packing structure variations between TQ1 and PCE10. This indicates that a route to efficient and thermal stable All-PSCs can be achieved in a ternary blend by using material with excellent pristine efficiency, combined with another material showing improved efficiency under thermal annealing.
|
|
